System.log shows (every 3 minutes): no valid selfIDs for more than 2 min

Besides having to live with A LOT of USB 2.0 problems since the upgrade from 10.4.6 to 10.4.7 (like may other people reported) I also noticed a lot of errormessages in /var/log/system.log, that have to do with the Apple 6 port Firewire/USB2.0 PCI card.
When starting up the system a line gets written that says like:
Aug 3 18:08:44 localhost kernel[0]: FireWire (OHCI) VendorID 10b9 ID 5253 PCI now active, GUID 0030bd05 18000d15; max speed s400.
Then, when the machine is properly running the log continues:
Aug 3 18:11:34 server kernel[0]: FireWire (OHCI) VendorID 10b9 ID 5253 PCI: no valid selfIDs for more than 2 minutes after bus reset.
Aug 3 18:14:46 server kernel[0]: FireWire (OHCI) VendorID 10b9 ID 5253 PCI: no valid selfIDs for more than 2 minutes after bus reset.
Aug 3 18:17:57 server kernel[0]: FireWire (OHCI) VendorID 10b9 ID 5253 PCI: no valid selfIDs for more than 2 minutes after bus reset.
etc. etc. etc.
That is about 1 line every 3 minutes.
I only have 3 USB2.0 drives connected to my 6 port card, no Firewire devices!
After trying all suggestions found on the Apple-site I simply kept getting these errors until: I plugged in a 'Target-Disk-Mode' PowerBook over a Firewire cable. Then the errors stopped showing up and the interface appears to be happy. I can even remove the PowerBook from the Firewire port now without getting any errors!

So, a workaround is to (temporarily if you wish) connect a Firewire-disk to the card. That will stop the errormessages from showing up.
The solution has to come from Apple. Empty Firewire ports should be allowed to 'not send any valid selfIDs' ever...

Similar Messages

Forcing log switch every minute.

Hi,
I want to force a log switch every one minute how can i do it?
What should be the value of fast_start_mttr_target?
Does a checkpoint force a log switch?
Do i need to only reduce the size of redo log to a small size?
How can i make sure that a log switch will happen after a particular time period for ex. 1Minute,2 minute.
I want to force a log switch every minute because i want to send the archive redo log to standby database so that not more than 1 minute changes in database are lost. I am using 10g R2 on windows 2003 server.
I am unable to find a solution. Any help?

Hi,
I want to force a log switch every one minute how
can i do it? yes with archive_lag_target parameter
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/onlineredo.htm#sthref934
What should be the value of fast_start_mttr_target?incremental or normal checkpoint "fast instance recovery/downtime concerned" introduced from oracle 8, this feature is enabled with the initialization parameter FAST_START_MTTR_TARGET in 9i.
fast_start_mttr_target to database writer tries to keep the number of dirty blocks in the buffer cache low enough to guarantee rapid recovery in the event of a crash. It frequently updates the file headers to reflect the fact that there are not dirty buffers older than a particular SCN.
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmtunin004.htm#sthref1110
Does a checkpoint force a log switch? log switch force to checkpoint ,checkpoint never force to log switch.
Do i need to only reduce the size of redo log to a
small size?depends yours SLA how far you can risk the data ,but it will effect yours database performance ,recommended to set the size of log which should imply the log swtich after filling to 20 mins,its a trade off risk vs perofrmance.
How can i make sure that a log switch will happen
after a particular time period for ex. 1Minute,2
minute.
want to force a log switch every minute because i
want to send the archive redo log to standby database
so that not more than 1 minute changes in database
are lost. I am using 10g R2 on windows 2003 server.
am unable to find a solution. Any help?
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/onlineredo.htm#sthref934Khurram

SM21 System Log shows error

Dear All,
We are having SAP ECC 6.0 which is on Microsoft Windows Server 2003 R2 Enterprise x64 Edition. The Oracle is 10.2.0.2.0. The SAP_Basis is 700 & level is 10.
The SM21 System Log shows below text in log which appears in transactions,
Enqueue: Transfer error while reading lock entries
> Destination: eccprd_PRD_00
> ENQUE_READ exception code: 4
> RFC error when sending logon dat
> a.
You are requested to kindly look into the above error and provide your help to resolve this issue.
I am awaiting for your valuable feedback for the above.
Regards
Pikal

Hi Deepak,
I have refereed the SAP Note as you said, however our SAP_Basis Release is 700, Level 10 SAPKB70010.
The SAP Note says SAP_Basis Release 702,730 & 731 and our is 700. Kindly go through for the same.
Thanks for your helping.
Regards
Pikal

6 Log Files every minute

I have a networked HP All In One Office Jet Pro L7500 running on Windows XP.
I removed all HP Software except the drivers. I was constantly getting messages from HP Monitoring SW that my printer was connected, disconnected, connected and on and on and on.
In addition, my temp folder would create 6 HP log files every minute. I hoped removing everything but the drivers would fix this - no.
I checked to see if there were updated drivers and I seem to have the latest.
How can this be fixed? My computer is freezing up if I do not delete these every few hours, also as it writes the files, my computer will slow down to a halt. The files are typically 1K but every 10 files or so will be around a 1MB.
HELP!!
Next step is removing the drivers and buying a better printer without this issue and trust me it will not be an HP if that is the case.

This is worrying to me because
A. nobody has answered yet
B. I have the same issue with an HP Photosmart D7400
I love the printer and the network caqpability, but it goes crazy with the log files to where it will eventually clog the hard drive on my Windows XP machine.
HP should reconsider the banner across the top of this paqe saying "Join the Conversation" if the chance of people doing so are slim.

Every time my lg g pad 8.3 lte tablet is turned off it reverts the saving email attachment back to internal storage. Every time I turn on, I change it back to save to SD card. It stays that way until it is turned off for more than a minute. If I do a r

Every time my lg g pad 8.3 lte tablet is turned off it reverts the saving email attachment back to internal storage. Every time I turn on, I change it back to save to SD card. It stays that way until it is turned off for more than a minute. If I do a restart, it holds the setting, but loses it when it is shut down for any period of time. Does anyone else have this issue? The setting holds for photos taken with camera storing to SD card. Only the email attachment setting does not hold.

I believe that system has a hall sensor on it to detect when the lid is closed so it can put the system to sleep and/or disable the monitor so it can be used with an external monitor only. If the sensor is marginal or has a bad cable, it may intermittently cut the monitor on and off, and may likewise put the system to sleep. One way to check would be to plug in an external monitor and if the laptop's screen cuts off or doesn't show up, start using the trackpad and press on a non-typing key like the shift key. If the external display suddenly pops and becomes active while the laptop display remains black, it's probably a problem with the sensor or the cable/connection. You might be able to fool the sensor into kicking on and off by moving a magnet over it. It's located on the left had side of the base with the unit opened up, and right over the audio output plug.
I know of some people that put a small magnet right over the hall sensor's location so the laptop display turns off and they use the system with an external monitor, keyboard, and mouse. If fooling with magnets, make sure they're small and don't get them close to the hard drive because a strong magnet can wipe them out.
I don't know if this will help you much, but it might.

Why is my powerbook G3 has been attempting to log in for more than 30 minutes

Why is my powerbook g3 not logging in, it has been attempting to do so fore more than 45 minutes. HELP!

Will it boot from the MacOS X installation disk? If so run the Disk Utility file check to see if any repair is needed.
https://kb.wisc.edu/helpdesk/page.php?id=3810
You could also try booting into safe mode which runs a file check as well.
http://support.apple.com/kb/HT1455
http://support.apple.com/kb/HT1564

In Yosemite, I can;t operate for more than a few minutes with Keychain or Safari asking for my login password. How can I turn this off, and still be safe?

Using Yosemite, I an't seem to work for more than a few minutes without being asked for my login password. Keychain wants it, Safari wants it, iCloud wants it..the list goes on. Then in 10 minutes or so, they all want it again. Passwords are being stored by Safari as usual, but new tabs or pages bring up the request. How can I turn this off and still have protection?

Tutorial: Resolving Keychain Issues
If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
1. Open Keychain Access (located in Applications/Utilities)
2. Go to the "Keychain Access" menu and select "Preferences"
3. Click the "First Aid" tab
4. Make sure the "Synchronize login keychain password" box is checked
5. Close the Preferences window
6. Go to the "Keychain Access" menu and select "Keychain First Aid"
7. Enter your username and password
8. Click the "Repair" button
The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
1. Launch Keychain Access (located in Applications/Utilities)
2. Click "Show Keychains" in the lower-left corner of the window.
3. Select the problematic keychain from the left-hand pane.
4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
5. Check all options for deletion and press "OK"
6. Create a new keychain by going to the "File" menu, then "New" and selecting
"New Keychain"
7. You can now make this keychain your default if you desire by selecting it, then
going to the "File" menu and selecting "Make '(name of keychain)' Default"
Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
First, you want to enable the root user:
1. OS X Mountain Lion: Enable and disable the root user
2. OS X Lion: Enable and disable the root user
3. Mac OS X 10.6: Enabling the root user
4. Enabling and using the "root" user in Mac OS X
After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
The above comes from an article published on MacFixit.com.

IPhoto gives import error "file not valid" when import more than one photo

Trying to import lots of photos.
Every time I try to import more than a few, I get an error that "The following files could not be imported (they may be an unrecognized file type of the files may not contain valid data)."
When I go back to importing just one at a time, it works fine every time.
I have tried rebuilding the iPhoto library as well.
I have tried also not copying into the iPhoto library and copying into the iPhoto library (using Preferences/Advanced/Importing).
Any help would be great.
This is painful doing one-by-one, and each one I bring in shows as a separate event...
Every once in a while I will get lucky and it will import more than 5, though I will still get the error before it imports all selected. Ugh!

Unfortunately did not work.
And now a silly question - how do I get to be able to see my original iPhoto library? When I try to open it, I don't see any of the albums and mobileme galleries I had created anymore (though I can still see them on the web)

My iphoto quites unexpectedly everytime I open it and says closes while using the eOkaoFr.dylib plugin. Does anyone know how to fix this? iphoto won't stay open for more than 1 minute at a time.

My iphoto quites unexpectedly everytime I open it and says closes while using the eOkaoFr.dylib plugin. Does anyone know how to fix this? iphoto won't stay open for more than 1 minute at a time. Help anyone?

Is there a crash log? If so post the first 100 or so lines o fit
Do you know what the ofending plugin is? and where it came from?
LN

HP 3050 will not stay on the wireless network for more than a few minutes at a time.

My HP DeskJet 3050 J610 is constantly dropping the wireless connection. It won't stay on for more than a few minutes. If I power cycle, it comes right back on, but drops again after a few minutes. It will print fine from a USB. When it drops off, pings time out even though the device shows "ready" in Windows 7, Windows XP and OSX. I've done everything HP suggests - static IP, upgraded firmware, diagnostic tools, etc. I am out of options.
I can hit print right now, printer shows as ready, then I will get a print error. If I go over and power cycle the printer, my document will print - most of the time. It will remain on the network for a few minutes, then stop working. As soon as I power cycle it, I get a few more minutes before it drops. It has always done this from day one.

I don't have another wireless network close by that I could test it on. I'm a little isolated. i might be able to work out a time when I could take it by a friend's house, but he's over an hour away.
I have a Win 7 laptop, a Win XP desktop and an old Mac Powerbook as well as an iPod Touch and iPad 3 that use my wireless network without any problems - besides the fact that hardly any of my devices will talk to the other... But that's an OS issue. They all see the network, and the printer after I cycle the power on it.
My wireless router is a Netgear WNR2000. I remember monkeying with the channels when I frist got this printer a few months ago, but I don't remember what all I did. Since I did a firmware update on the router, the channel is now set to Auto. If there's a channel you think I should try, let me know what it is. The printer shows up on the list of devices in the router, but that may be because I have its address reserved for the static IP. Interestingly, the router sees the printer, even though my devices cannot. I did a ping just now while checking that, and got this - which is unusual. Normally they all time out.
Pinging 192.168.1.150 with 32 bytes of data:
Request timed out.
Request timed out.
Reply from 192.168.1.150: bytes=32 time=3223ms TTL=255
Request timed out.
Ping statistics for 192.168.1.150:
    Packets: Sent = 4, Received = 1, Lost = 3 (75% loss),
Approximate round trip times in milli-seconds:
    Minimum = 3223ms, Maximum = 3223ms, Average = 3223ms
Played around a bit more pinging between devices and got this oddity - without a power cycle just a couple minutes later.
ping 192.168.1.150 -n 50 -l 500
Pinging 192.168.1.150 with 500 bytes of data:
Reply from 192.168.1.150: bytes=500 time=527ms TTL=255
Reply from 192.168.1.150: bytes=500 time=10ms TTL=255
Reply from 192.168.1.150: bytes=500 time=12ms TTL=255
Reply from 192.168.1.150: bytes=500 time=20ms TTL=255
Reply from 192.168.1.150: bytes=500 time=18ms TTL=255
Reply from 192.168.1.150: bytes=500 time=13ms TTL=255
Reply from 192.168.1.150: bytes=500 time=11ms TTL=255
Reply from 192.168.1.150: bytes=500 time=19ms TTL=255
Reply from 192.168.1.150: bytes=500 time=17ms TTL=255
Reply from 192.168.1.150: bytes=500 time=15ms TTL=255
Reply from 192.168.1.150: bytes=500 time=10ms TTL=255
Reply from 192.168.1.150: bytes=500 time=20ms TTL=255
Reply from 192.168.1.150: bytes=500 time=19ms TTL=255
Reply from 192.168.1.150: bytes=500 time=17ms TTL=255
Reply from 192.168.1.150: bytes=500 time=15ms TTL=255
Reply from 192.168.1.150: bytes=500 time=11ms TTL=255
Reply from 192.168.1.150: bytes=500 time=21ms TTL=255
Reply from 192.168.1.150: bytes=500 time=19ms TTL=255
Reply from 192.168.1.150: bytes=500 time=17ms TTL=255
Reply from 192.168.1.150: bytes=500 time=13ms TTL=255
Reply from 192.168.1.150: bytes=500 time=14ms TTL=255
Reply from 192.168.1.150: bytes=500 time=20ms TTL=255
Reply from 192.168.1.150: bytes=500 time=18ms TTL=255
Reply from 192.168.1.150: bytes=500 time=16ms TTL=255
Reply from 192.168.1.150: bytes=500 time=14ms TTL=255
Reply from 192.168.1.150: bytes=500 time=13ms TTL=255
Reply from 192.168.1.150: bytes=500 time=21ms TTL=255
Reply from 192.168.1.150: bytes=500 time=18ms TTL=255
Reply from 192.168.1.150: bytes=500 time=15ms TTL=255
Reply from 192.168.1.150: bytes=500 time=15ms TTL=255
Reply from 192.168.1.150: bytes=500 time=11ms TTL=255
Reply from 192.168.1.150: bytes=500 time=18ms TTL=255
Reply from 192.168.1.150: bytes=500 time=16ms TTL=255
Reply from 192.168.1.150: bytes=500 time=14ms TTL=255
Reply from 192.168.1.150: bytes=500 time=10ms TTL=255
Reply from 192.168.1.150: bytes=500 time=18ms TTL=255
Reply from 192.168.1.150: bytes=500 time=16ms TTL=255
Reply from 192.168.1.150: bytes=500 time=14ms TTL=255
Reply from 192.168.1.150: bytes=500 time=22ms TTL=255
Reply from 192.168.1.150: bytes=500 time=19ms TTL=255
Reply from 192.168.1.150: bytes=500 time=18ms TTL=255
Reply from 192.168.1.150: bytes=500 time=16ms TTL=255
Reply from 192.168.1.150: bytes=500 time=14ms TTL=255
Reply from 192.168.1.150: bytes=500 time=22ms TTL=255
Reply from 192.168.1.150: bytes=500 time=20ms TTL=255
Reply from 192.168.1.150: bytes=500 time=18ms TTL=255
Reply from 192.168.1.150: bytes=500 time=16ms TTL=255
Reply from 192.168.1.150: bytes=500 time=14ms TTL=255
Reply from 192.168.1.150: bytes=500 time=9ms TTL=255
Reply from 192.168.1.150: bytes=500 time=20ms TTL=255
Ping statistics for 192.168.1.150:
    Packets: Sent = 50, Received = 50, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 9ms, Maximum = 527ms, Average = 26ms
Is there a possibility that the printer is going into a standby state and having trouble waking when traffic hits? I don't know if that's possible, just seems like it looking at this.

Wireless connection lost after macbook pro sleeps for more than 15 minutes

It's annoying. I have a brand new macbookpro 3.06Ghz 17" hi-res screen running OS-X 10.6.3 and the wireless connection keeps dropping after the computer is either turned off or sleeping for more than 15 minutes.
My router is a linksys wireless G, has dd-wrt software in it which is very powerful. When I release or renew the DHCP at the router, the mackbook connects to the wireless network, no problem.
What configuration can be done at the macbook as to not have it time-out airport wireless connections unless I renew/release DHCP at the router? This is an annoyance beyond the limits of anyone's patience.... Thanks in advance for any help!

Well, since nobody answered this post I decided to try a bunch of things and I believe I came to a solution:
1 - Make airport the first connection under System Preferences->Network
2 - In the advanced window:
- Under AirPort: Keep only one network name on the list (the one you use all the time)
- Select 'remember networks this computer has joined' and deselect all other boxes
- Take note of the Airport ID (xx:xx:xx:xx:xx) and put it in your router's MAC address list. I do this because I only allow connections to my router from mac IDs that are on the list I create. In my case, I have my macbook pro and my PS3 system. If you don't know how to edit the MAC list in your router, do some research. It's pretty easy.
- Under TCP/IP: Select "Using DHCP" on the IPv4 drop box
- Select "Off" for IPV6 drop box
- Under DNS, after you connect at least once, you should see (grayed out) your router's IP address on the left box and the domain on the right side box.
Finally, under "Ethernet" you should see your Mac address there, the configure option should be set to Automatically and MTU as standard (1500).
Press OK and then press "Apply" and lock that screen by clicking on the padlock at the bottom left. BTW on the top of this screen Location should be "Automatic" - if not, select it and apply.
Done! Your wireless should connect quickly after the computer is turned on or waken up from sleep state. This assumes you configured your router correctly (mac addresses, frequencies, etc).
Good Luck to all who try this - at least I have not have any more dropped wireless connections.
Message was edited by: KEForex
Message was edited by: KEForex

Playing music through nano and auto stereo, while traveling...nano is set to shuffle, but if vehicle is stopped for more than a few minutes, nano restarts with same song everytime! How do I make it really shuffle the songs

Having trouble with Nano shuffle while traveling. It's connected to my vehicle stereo and set to shuffle. When I stop the vehicle for more than a few minutes, the music resumes with the same song it always starts with. How can I get it to keep shuffling after restarting the vehicle?

Is the iPod actually doing the music playing? If the iPod is connected using a USB port (on the car audio system) and docking cable, the car audio system is doing music playing. The iPod is just acting as a storage device (like a USB flash drive) with song files. So, in that setup, it does not matter whether the iPod is set to shuffle or not, because the car audio system is playing the songs. Any change to how it plays songs would have to be a setting on the car audio system.

Icons keep disappearing off the monitor when computer sleeps for more than 10 minutes

My new HP Pavilion I5-2300 keeps locking up when the computer rests for more than 10 minutes. When i go to wake up the computer the desktop background comes up on the monitor, but all of my icons are missing and no command prompts work from the keyboard. I have just been unplugging and then replugging the monitor from the power source and that seems to reboot the freeze, but i really don't want to have to do this every time it happens. Anybody experience anything similar? Am i missing an easy solution here? Thanks

Hi,
As you can see from the theory this alert could mean two things:
1. Too many powershell scripts are executed on agent simultaneously
2. There are scripts that takes much time to complete
First of all, you need to evaluate a script-based module (workflow). You need to find answers to following questions:
– What is the target for this script-based workflow?
– How many instances of this target class are exist on the affected computer?
– Does this script leveraging a cookdown concept?
– How long it take for script to complete?
Please go through the articles below for more details:
http://www.systemcentercentral.com/research-this-kb-power-shell-script-was-dropped/
In addition, here is a similar thread for your reference:
Threshold for SCOM 2012
https://social.technet.microsoft.com/Forums/systemcenter/en-US/00dc16c4-9858-459a-8c65-7d73ac8cc997/threshold-for-scom-2012
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

IOS4 in 3GS hanging for more than 2 minutes!

My iPhone 3GS is hanging after I press END before, during and afters calls. This never happened in 3.1.3!
Sometimes it stays like that for more than 2 minutes, than it shows the unable to complete call message.
It looks like it is losing the carrier signal and tries to reconnect.
Any ideas to avoid this?
Alexandre.

Have you tried restoring the iPhone or hard resetting it by holding the Home and Hold button until it switches off?

WSP deployment showng as deploying for more than 30 minutes.

WSP deployment showng as deploying for more than 30 minutes.
Hi,
I have an wsp , where i tested deploying in my test environment, But when i try deploying same wsp deployment in Production. Its showing as
deploying for more than 30 mins.
Badri

This is most likely due to the timer service being turned off or failing for a machine. When deploying a WSP, it will schedule a job on ALL servers in the farm with the web application service turned on. It will stay on deploying if one of the servers is
in bad health.
1. Use CA to see on which server it is failing.
2. Cancel the deployment like described here:
http://ybbest.wordpress.com/2011/09/10/how-to-fix-%E2%80%9Ca-deployment-or-retraction-is-already-under-way-for-the-solution-%E2%80%9C-wsp%E2%80%9D-and-only-one-deployment-or-retraction-at-a-time-is-supported%E2%80%9D/
3. fix the server and/or timer service somehow.
4. you can deploy with PowerShell and the -Local switch like described here:
http://technet.microsoft.com/en-us/library/ff607534.aspx do it on all servers, that way you will either succeed it or see the problem.
Hope that helps!
Independant SharePoint Consultant. Feel free to contact me. Blog:
http://www.sharepoint.bg/radi Twitter:
@RadiAtanassov

System.log shows (every 3 minutes): no valid selfIDs for more than 2 min

Similar Messages

Maybe you are looking for