System Management entity is not operational

Hi,
- NI AT-FBUS Interfacecard
- Windows XP
- NI-Fieldbus 3.1
Installation of the hardware and the software o.k. so far. No Interruptconflict.
I have connect my Fieldbusdevice to my system. When I Expand All with the NI-FBUS Dialog Utility 3.1 I get the following Error:
Error: System Management entity is not operational.
Does anybody has an Idear what does that mean and how I can solve (fix) this problem?
Thank you very much,
Genesiss

Does your system have any existing FF interface module before you connect to AT-FBUS?
If so, there might be some conflicts between AT-FBUS and the interface module. In that case, please close NI-FBUS Communications Manager, and run the Interface Configuration Uitility, check the settings of your interface port, specially check the Device Address (Fixed) and Device Type; the suggested values could be "0x1A" and "Basic Device". Then click "OK" and close the Interface Configuration Utility, and try to connect to your system and run NI-FBUS Communications Manager again, see whether it helps.

Similar Messages

System.Management.Automation.ExitException not trapped

If I ran the following code and click the Exit-Button, I get a
System.Management.Automation.ExitException.
$ErrorActionPreference = 'Stop'
Add-Type -AssemblyName 'System.Windows.Forms'
$Form = New-Object Windows.Forms.Form
$Form.Add_Shown({
$Form.Activate()
$Button_Exit = New-Object System.Windows.Forms.Button
$Button_Exit.Text = 'Exit'
$Form.Controls.Add($Button_Exit)
$Button_Exit.Add_Click({
Trap {
Write-Host 'trapped'
Exit
$Form.ShowDialog()
I found, I can prevent the exception if I use [System.Environment]::Exit(0)
instead of Exit.
My Question is: Why is System.Management.Automation.ExitException
not trapped?
The Trap does work with other exceptions.

Are you trying to only exit the form or are you trying to exit the PowerShell console/ISE? Based on the error that is happening, you won't be able to catch it under PowerShell as it seems to be happening outside of it (yes the error happens because of
what you are doing in PowerShell, but it is outside of PowerShell's control). I would stick with your workaround to deal with the exit button event.
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book

When i turned on my notebook a message indicated that a system fan (90b) was not operating correctly

When I turn on my HP Pavilion G7 - running Windows 7 - notebook an error screen comes on saying that a system fan is not working with what seems like an error code of 90B. I can continue through to startup normally, but the message indicates that it may cause malfunctions to do so. How do I resolve this problem?

Try to use a can of compressed air in the reverse direction of the normal air flow with the computer off. A dust/lint/hair matt can accumulate on the inside of the heatsink near the fan blades.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

SNMP Configure OnCommand System Manager 3.1 on FAS2020 Ontap 7.3.7

Hi, I have the to discover snmp after configure SNMP. Even I tried both trap hosts with my windows IP where I installed Oncommand system manager and the IP of Ontap 7.3.7. Can someone please verify which host is correct one? what is the requirement for SNMP configure. Thanks,Kevin.

Sorry, access for this KB is restricted. Then, check following point and fix them. 1. Check if SNMP agent is enabled.
   filer> options snmp.enable
   If not, enable it by "options snmp.enable on"
2. Check if SNMP access is allowed.
   filer> options snmp.access
   If IP address of System Manager host is not listed, set it by "options snmp.access host=<IP address>"
3. Check filer's SNMP community name.
   filer> snmp community
   By default, "ro public" is displayed.
   If you have modified SNMP community name, you need to modify registration on System Manager.
   Edit C:\Users\<username>\NetApp\SystemManager\SystemManager.config and adjust snmp-community
   element under storage-system element.

Managed System SLM~ABAP is not configured (Step 10: Configuration Check)

When I try to spend the last procedure "Configuration Check" (item 10 - Managed System Configuration) I get here is only an error message
The definition of Technical System 'SLM~JAVA' is not correct: 'SLM~JAVA': Operating System 'Linux~2.6.32-358.23.2.' of Host 'sslm' must have at least one Software Component Version
'SLM~JAVA': Operating System 'Linux~2.6.32-358.23.2.' of Host 'sslm' must have at least one Software Component Version
Outside Discovery issue: refer to SAP Note 1611483
Managed systems setup | Managed System Definition Status (post setup) | SYSTEM =SLM~JAVA
What a way such settings: Managed systems setup | Managed System Definition Status?
I probably know only the tab SapSolution Manager: Configuration-> Managed system configuration-> Technical systems, but there make these settings is not possible.
How do I resolve this is "must have at least one Software Component Version"?
ps said note (1611483) has been done, but apparently no effect brought

Hi Michael,
Can you please check below :
Correct Software Component version is displayed in LMDB -> Host - > Tab Installed Software.
Managed System setup -> Assign Diagnostic agent -> Check SAP Host agents (to enusre agent is running)
You may restart both Diagnostic and Host agent and check again after few minutes if data is updated.
Additionally please check below SAP notes which might help resolve the issue :
1890035 - Error "Host 'hostname' must have at least one installed Technical system" during the step 'Check Prerequisites'
1799138 - Solution Manager configuration check returns "The definition of Technical System '{SID}~{STACK}' is not correct: '{SID}~{STACK}' : Operating System '{OSName}' of Host '{hostname}' must have at least one Software Component Version"
Hope this helps.
Thanks & Regards,
Nisha

I have installed oracle 10g in my winxp machine. i am using enterprise manager. i am not able to shutdown the system as it asks for os username and password. i have provided my os username and password but eerror persiste. somebody pls help me to get rid

I have installed oracle 10g in my winxp machine. i am using enterprise manager. i am not able to shutdown the system as it asks for os username and password. i have provided my os username and password but eerror persiste. somebody pls help me to get rid of this.

Here I am using Java Type IV for database
connection.
So,there was no necessity of creating DNS.How your app communicates with db shouldn't matter for the end user. Still, you may want to use a functional network name also for the thin client driver connection string.
So,is there any other way to solve this problem.What is the problem really? Do you not use dns for network naming? Maybe you have to manage the hosts file on every client then.

The Em Key is not configured properly or is corrupted in the file system and doe s not exist in the Management Repository.

I'm getting this error and is there any way to resolve this without re-creating the service/s again, etc. Just curious if there are any suggestions/steps I may have missed, if not, I'll drop and recreate the services again
Anyway, I have a backup of the emkey.ora and put it in the sysman/config directory, but still doesn't work... please see below...
C:\Documents and Settings\abigail>emctl status emkey
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is not configured properly or is corrupted in the file system and doe
s not exist in the Management Repository. To correct the problem:
1) Copy the emkey.ora file from another OMS or backup machine to the OH/sysman/c
onfig directory.
2) Configure the emkey.ora file by running "emctl config emkey -emkeyfile <emkey
.ora file location>".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is already configured. To override the current configuration, run "em
ctl config emkey <options> -force".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config -force -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
The Em Key could not be configured. Unable to access file E:\app\abigail\product
\11.2.0\dbhome_1\sysman\config.
C:\Documents and Settings\abigail>emctl secure dbconsole -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://ABIGAIL:5501/em/console/aboutApplication
DBCONSOLE already stopped...   Done.
Agent is already stopped...   Done.
Securing dbconsole...   Started.
Please enter repository schema password:
Securing dbconsole...   Failed.
EMKey is misconfigured.

Sorry but I'll have to ignore your suggestion, and don't worry about how I spend my time
AND OHMYGODD IT WORKSS!!! For future reference, this is how I solved it based on my searches, actually based on one particular search:
http://franjv.blogspot.com/2013/08/emkey-problems-in-oracle-rac-11gr2.html
Thank youuu whoever wrote that and... is it the same "Fran" who helped me the last time?!? Coincidence??
ANyway, thank youuuu

I have intel mac 10.411, want to access iTunes, won't let me unless upgrade tp itunes 10, but it needs OSX 10.5. I just want to download some music, not upgrade my operating system. It's not THAT old. Ideas?

I have intel mac 10.411, want to access iTunes, won't let me unless upgrade tp itunes 10, but it needs OSX 10.5. I just want to download some music, not upgrade my operating system. It's not THAT old. Ideas?

As long as you don't need all the bells and whistles of the iTunes Store such as Ping, and don't need to sync an iOS device running iOS 4.x, then iTunes 9.2.1 should work for you. It should be available via Software Update, but if not, you can still get it here:
http://support.apple.com/kb/DL1056
but it would be best to upgrade your Mac to Mac OS X 10.5 or 10.6, since it's probable that eventually the iTunes Store will no longer support iTunes 9.x.
Regards.
P.S. Mac OS X 10.4 was discontinued three and a half years ago, so yes, it's getting rather long in the tooth. Cheers.

Aspnet_compiler web.config(132): error ASPCONFIG: Could not load type 'System.Data.Entity.Design.AspNet.EntityDesignerBuildProvider'

My latest MVC 5 project built with VS 2013 compiled and works fine on my PC but can not be published to server using command line aspnet_compiler. I kept getting the web.config(132): error ASPCONFIG: Could not load type 'System.Data.Entity.Design.AspNet.EntityDesignerBuildProvider'
In my web.config file, I have the following as suggested by many for solution:
<add assembly="System.Data.Entity, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<add assembly="System.Data.Entity.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
However, the error is persisting. I have no clue how to fix this. Hope someone can help.

Hello FredVanc,
As you mentions, it could work with your develop environment, so I am wondering it is that on the server machine, the assembly is not there actually. Here are some information I found which might be helpful:
https://support.microsoft.com/en-gb/kb/958975?wa=wsignin1.0
https://social.msdn.microsoft.com/Forums/en-US/1295cfa8-751b-4e9b-a7a7-14e1ad1393b6/compiling-error?forum=adodotnetentityframework
By the way, since this issue is related with ASP.ENT project, I suggest that you could post it to the ASP.NET forum, there are web experts will help you:
http://forums.asp.net/
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

MSFT_ISCSITarget.Connect() Method is throwing System.Management.ManagementException "not found"

I am using c# wmi calls to connect to connect to ISCSI LUN through ISCSI initiator. I am using windows server 2012 r2. From server manager I am able to connect through ISCSI initiator. From GUI every thing is working fine. I am able to list ISCSISessions
through ISCSISession.GetInstances() in c# code. WmiExplorer is also showing that connect method is there. Generated class contains the connect() method.
System.Management.ManagementException was unhandled by user code
HResult=-2146233087
Message=Not found
Source=System.Management
StackTrace:
       at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
       at System.Management.ManagementObject.Initialize(Boolean getObject)
       at System.Management.ManagementObject.get_ClassPath()
       at System.Management.ManagementObject.GetMethodParameters(String methodName, ManagementBaseObject& inParameters, IWbemClassObjectFreeThreaded& inParametersClass, IWbemClassObjectFreeThreaded& outParametersClass)
       at System.Management.ManagementObject.GetMethodParameters(String methodName)
       at ROOT.MICROSOFT.WINDOWS.STORAGE.ISCSITarget.Connect(String AuthenticationType, String ChapSecret, String ChapUsername, String InitiatorInstanceName, String InitiatorPortalAddress, Boolean IsDataDigest, Boolean IsHeaderDigest,
Boolean IsMultipathEnabled, Boolean IsPersistent, String NodeAddress, Boolean ReportToPnP, String TargetPortalAddress, UInt16 TargetPortalPortNumber, ManagementBaseObject& CreatediSCSISession) at ROOT.Microsoft.Windows.Storage.MSFT_iSCSITarget.cs:line
402

Hi,
The issue is related to C# language, I suggest you ask for help from MSDN forum for better and accurate answer to the question.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=csharpgeneral
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Manage gsdo path not found in my gateway system

Hi ,
I'm working on sap gateway 7.4.0 system , where i'm not able to find the below path ,
In transaction SPRO open the SAP Reference IMG and navigate to: SAP
NetWeaver ->Gateway Former Development -> Generic Channel Administration
-> General Settings -> Manage GSDO Groups .
but in my gateway system , im not able find the above path.
Pl suggest what might be the issue along with solution ..,
Regards,
Lokeswar.

Ok. as per https://help.sap.com/saphelp_gateway20sp06/helpdata/en/14/b58347c13d476c9b5f25539d189f66/content.htm
Apart from basic configuration settings the Generic Channel configuration activities are listed in the Implementation Guide (IMG) in the system where software component IW_FND is deployed. In the SAP Reference IMG navigate to SAP NetWeaver Gateway Former Development Generic Channel .
it means that IW_FND software component enables generic channel configuration. check if this helps.

No system manager locations set, search application might not be ready yet

Hi,
I am just setting up a new SharePoint 2013 environment (Windows server 2008 R2 + SQL Server 2008 R2) and I am getting this error message in powershell when I try to save my new search topology: No system manager locations set, search application might
not be ready yet. The installation script used to install and create the search service originates from this link: http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=378 and I receive the error message after running $clone.Activate().
ULS is writing this:
05-29-2013 14:57:00.94 mssearch.exe (0x19C0) 0x1A68 SharePoint Server Search Crawler:Content Plugin cd11 Critical Content Plugin can not be initialized - list of CSS addresses is not set.
05-29-2013 14:56:08.27 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration dkd5 High synchronizing search service instance 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:08.27 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration eff0 High synchronizing search data access service instance 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.38 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ajzc7 Medium Cleanup of Orphan Systems in server SR00667 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration agwve Medium Synchronizing legacy admin 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ai4f1 High Unable to get systemmanagerlocation from db 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ai84s Medium Skipping legacy admin sync as there is no system manager location set 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration agwvc Medium Skipping Topology Synchronize.The active topology does not have any Components. 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ajnco Medium Cleaning up Orphan nodes in system : 7B4831 8f28209c-5d35-a0cc-7fad-bd7b088335ee
So basically all else is going fine before saving the clone. Application pool is created, search service and it´s proxy is created (the databases are also created in SQL). The clone is after this created and then the components are added.
I have tested with both March and April CU. I use separate accouns for search service, installation and so on. I have tested giving the search application pool account local admin right but didnt make any difference.
Some posts in Internet around this matter is pointing towards there might be 4 missing patches like here: http://blog.steigis.ch/sharepoint/sps2013/search-in-starting-state/ They are all installed on my server.
Search host controller service and SharePoint Server Search are started.
Before creating the service I ran this. I have done this on all my other installations of search to solve the problem with the host service is in "starting" state. Info taken from here: http://mmman.itgroove.net/2012/12/search-host-controller-service-in-starting-state-sharepoint-2013-8/
$acl = Get-Acl HKLM:\System\CurrentControlSet\Control\ComputerName
$person = [System.Security.Principal.NTAccount] "Users"
$access = [System.Security.AccessControl.RegistryRights]::FullControl
$inheritance = [System.Security.AccessControl.InheritanceFlags] "ContainerInherit, ObjectInherit"
$propagation = [System.Security.AccessControl.PropagationFlags]::None
$type = [System.Security.AccessControl.AccessControlType]::Allow
$rule = New-Object System.Security.AccessControl.RegistryAccessRule($person, $access, $inheritance, $propagation, $type)
$acl.AddAccessRule($rule)
Set-Acl HKLM:\System\CurrentControlSet\Control\ComputerName $acl
$sh = Get-SPServiceInstance | ? {$_.TypeName -eq "Search Host Controller Service"}
After this I do a server restart and continue with creating the search service and its components.
Any ideas?

I had exactly the same issue when setting up a new SharePoint 2013 environment (Windows Server 2012, SP2013 with PU March 2013 and CU April 2013, .NET 4.5). I have tried almost everything during the last weeks to configure the Search Service Applicatione,
e.g. create the service from GUI, create it from PowerShell, verify my search account had enough permissions, check for missing updates etc. etc. Same error no matter what I tried.
Using another SharePoint farm I went through a similar configuration of the Search Service Application. I used exactly the same script as I did on the first server and the setup completed without any issues. So why did the same features fail during the setup?
To find an answer I compared the two farms and the only thing I noticed that were different was the lack of .NET 3.5 on the application and WFE server in the first farm. I then enabled .NET 3.5 features and now the Search Service Application works as expected
I had no idea enabling .NET 3.5 features would solve the issue - I thought .NET 4.5 was backward compatible and SharePoint only requires .NET 4.5 according the
requirements?

Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect request. Some functionality might be disabled

We are receiving following error, while trying to deploy the application on Win Phone emulator. “Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect
request. Some functionality might be disabled.”
I have tried all possible ways that we found on blogs. We are still not able to solve this issue

I have had a lot of issues with the emulator in the past.
Check out this troubleshooting guide. It might help:
https://msdn.microsoft.com/en-us/library/windows/apps/jj681694(v=vs.105).aspx
Also, I find that if I cancel my build/deploy while it is stuck on booting the OS and then wait a short while the phone OS will complete booting, and from that point I can deploy to the emulator. It's a workaround, but it works well for me.
I need to do that on Windows 10 tech preview, which may or may not be simply an incompatibility with the beta OS.
I'm a self-taught noob amateur. Please take this into account when responding to my posts or when taking advice from me.

I have windows vista 32 bit operating system. tunes 11 will not install

i have windows vista 32 bit operating system. tunes 11 will not install.

Hi damanfromni,
If you are having issues installing iTunes on your Windows machine, you may find the following article helpful:
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden

"This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host does not support Intel VT-x"

Hi, I have installed vmware 5.5 hypervisor on hp G8 microserver. I have created one vm as windows 2008 R2. I have also install vmware workstation 11 on this vm. In this workstation when I tried to run vmware 5.5 hypervisor I come across "This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host does not support Intel VT-x" this statement. Which shows that the host machine does not support virtualization and for that you need to go in Bios and enable it but in present case as host machine is also a vm and you would not find much detail of Bios when you log into the Bios therefore, I am pretty much stuck here. I don't see any information in relation to this. Now my question is:
1. Can we run ESXi inside a vm which is already sitting on ESXi?

I moved the discussion from VMware Workstation to Nested Virtualization which contains several hints on what's possible and what needs to be configured to make things work.
André

System Management entity is not operational

Similar Messages

Maybe you are looking for