System Messages Log

Hi,
Is it possible to turn off the System Message Log so that it does not load every time I log into SAP?
Thanks,
Naomi

Hi,
system messages log is a kind of help provided to the users.
What ever operations carried on the application are informed to the users about their success and failure.
Red messages are error messages.
Green messages are success messages.
Blue messages are warning or informatiive messages.
Sometimes with the HELP tag, located next to the error message, user himself can find out the cause of the message.
So , in my opinion it is not wise to turn it off.
Moreover, it can not be.
Thanks
Malhaar

Similar Messages

  • System Message "Linking primary sales accounts has not been completed"

    When I try to enter an incoming Payment, I get System Message "Linking primary sales accounts has not been completed".  What have I missed.
    Banking -> Incoming Payments -> Incoming Payments
    A System Message window pops up and the System Message Log window indicates it is an informational message with a message ID -1.
    New System
    Version: 88
    PL: 14

    Hi,
    Welcome you to the forum.
    I have moved your thread from admin to here. Your question belongs here.
    Have you searched the forum? There are quite a few discussions for this topic. Such as this: Linking primary sales accounts has not been completed
    Thanks,
    Gordon

  • How to pop up a system message for a specific user when She/He log on SAP

    Hi Friends,
    As we know SM02 setting will pop up a system message to all users in specific client in a specific period when the user log on SAP system; and we can do the same thing via using function module SM02_ADD_MESSAGE.
    But now we want to pop up a message to a specific user ID when somebody log on SAP via this ID, instead of all user IDs in the client. Please do we have any similar traction / function module / class method to to do this job??
    Thanks in advance.
    Joe

    Below code can be used to send a pop up message to all users who are logged on to the
    system.
    DATA: MESSAGE(128) VALUE 'Test message'.
    DATA: OPCODE TYPE X VALUE 2.
    DATA: BEGIN OF USR_TABL OCCURS 10.
    INCLUDE STRUCTURE UINFO.
    DATA: END OF USR_TABL.
    CALL 'ThUsrInfo' ID 'OPCODE' FIELD OPCODE
    ID 'TAB' FIELD USR_TABL-SYS.
    LOOP AT USR_TABL.
    CALL FUNCTION 'TH_POPUP'
    EXPORTING
    CLIENT = SY-MANDT
    USER = USR_TABL-BNAME
    MESSAGE = MESSAGE
    EXCEPTIONS
    USER_NOT_FOUND = 1.
    ENDLOOP.
    In the above code just pass the desired user ID instead of All user ID's
    Edited by: harsh bhalla on Mar 26, 2009 2:14 PM

  • Unable to Log-in *SAP System Message : Error while reading a Dynpro*

    Hi,
    We are facing issues while logging-in through SAP logon 710.
    The system throws an error dialog box with the below message:
    SAP System Message : Error while reading a Dynpro
    At the OS level Java process  server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.

    Hi Please find the contents of std_server.out below.
    stdout/stderr redirect
    node name   : server0
    pid         : 4124
    system name : KEC
    system nr.  : 01
    started at  : Mon Jul 27 15:44:57 2009
    [Thr 5656] MtxInit: -2 0 0
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    SAP J2EE Engine Version 7.00   PatchLevel 110760.44 is starting...
    Loading: LogManager ... 250 ms.
    Loading: PoolManager ... 0 ms.
    Loading: ApplicationThreadManager ... 47 ms.
    Loading: ThreadManager ... 16 ms.
    Loading: IpVerificationManager ... 0 ms.
    Loading: ClassLoaderManager ... 16 ms.
    Loading: ClusterManager ... 93 ms.
    Loading: LockingManager ... 32 ms.
    Loading: ConfigurationManager ... 1032 ms.
    Loading: LicensingManager ... 0 ms.
    Loading: CacheManager ... 93 ms.
    Loading: ServiceManager ...
    Loading services.:
      Service runtimeinfo started. (16 ms).
      Service cross started. (31 ms).
      Service file started. (31 ms).
      Service memory started. (31 ms).
      Service timeout started. (16 ms).
      Service trex.service started. (32 ms).
      Service userstore started. (0 ms).
      Service jmx_notification started. (15 ms).
      Service p4 started. (62 ms).
      Service classpath_resolver started. (16 ms).
      Service deploy started. (3722 ms).
      Service MigrationService started. (31 ms).
      Service bimmrdeployer started. (0 ms).
      Service log_configurator started. (5177 ms).
      Service locking started. (0 ms).
      Service http started. (126 ms).
      Service naming started. (157 ms).
      Service failover started. (16 ms).
      Service appclient started. (31 ms).
      Service javamail started. (47 ms).
      Service ts started. (47 ms).
      Service jmsconnector started. (47 ms).
      Service licensing started. (15 ms).
      Service connector started. (93 ms).
      Service iiop started. (94 ms).
      Service configuration started. (16 ms).
      Service webservices started. (265 ms).
      Service dbpool started. (1204 ms).
      Service UT started. (0 ms).
    Jul 27, 2009 3:45:09 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: "     Error while reading a dynpro                                        ". This message is critical if it appears during the startup of the AS Java.
    Jul 27, 2009 3:45:09 PM  ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
      service com.sap.security.core.ume.service ================= ERROR =================
    Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    [Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    Jul 27, 2009 3:45:09 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.

  • RMAN ALert Log Message: ALTER SYSTEM ARCHIVE LOG

    Created a new Database on Oracle 10.2.0.4 and now seeing "ALTER SYSTEM ARCHIVE LOG" in the Alert Log only when the online RMAN backup runs:
    Wed Aug 26 21:52:03 2009
    ALTER SYSTEM ARCHIVE LOG
    Wed Aug 26 21:52:03 2009
    Thread 1 advanced to log sequence 35 (LGWR switch)
    Current log# 2 seq# 35 mem# 0: /u01/app/oracle/oradata/aatest/redo02.log
    Current log# 2 seq# 35 mem# 1: /u03/oradata/aatest/redo02a.log
    Wed Aug 26 21:53:37 2009
    ALTER SYSTEM ARCHIVE LOG
    Wed Aug 26 21:53:37 2009
    Thread 1 advanced to log sequence 36 (LGWR switch)
    Current log# 3 seq# 36 mem# 0: /u01/app/oracle/oradata/aatest/redo03.log
    Current log# 3 seq# 36 mem# 1: /u03/oradata/aatest/redo03a.log
    Wed Aug 26 21:53:40 2009
    Starting control autobackup
    Control autobackup written to DISK device
         handle '/u03/exports/backups/aatest/c-2538018370-20090826-00'
    I am not issuing a log swiitch command. The RMAN commands I am running are:
    CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
    CONFIGURE CONTROLFILE AUTOBACKUP ON;
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/u03/exports/backups/aatest/%F';
    CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET;
    CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/u03/exports/backups/aatest/%d_%U';
    BACKUP DATABASE PLUS ARCHIVELOG;
    DELETE NOPROMPT OBSOLETE;
    DELETE NOPROMPT ARCHIVELOG UNTIL TIME 'SYSDATE-2';
    I do not see this message on any other 10.2.0.4 instances. Has anyone seen this and if so why is this showing in the log?
    Thank you,
    Curt Swartzlander

    There's no problem with log switch. Please refer to documentation for more information on syntax "PLUS ARCHIVELOG"
    http://download.oracle.com/docs/cd/B19306_01/backup.102/b14192/bkup003.htm#sthref377
    Adding BACKUP ... PLUS ARCHIVELOG causes RMAN to do the following:
    *1. Runs the ALTER SYSTEM ARCHIVE LOG CURRENT command.*
    *2. Runs BACKUP ARCHIVELOG ALL. Note that if backup optimization is enabled, then RMAN skips logs that it has already backed up to the specified device.*
    *3. Backs up the rest of the files specified in BACKUP command.*
    *4. Runs the ALTER SYSTEM ARCHIVE LOG CURRENT command.*
    *5. Backs up any remaining archived logs generated during the backup.*
    This guarantees that datafile backups taken during the command are recoverable to a consistent state.

  • System message at the time of login & need  post installation

    Hallo Everybody
    I just install the SAP IDES ECC 5.0 (SQL database), I also running some transaction, but from 2 days i receive the message at the time of logging
    System message
    Validity of certificate from list with PSE type >system PSE < ends in 1 day. for more information see the SAP system log (transaction SM21)
    but i also check the tran. SM21 but i can't find something that indicate what exact erroe and dignosis.
    So please suggest me the solution.
    Also  what  tran. are need to run (Post installation) after the installation. beacause i install IDES on standalone machine (Require Post installation proc.)
    System Desc.
    SID=ERP
    instance no=00
    host=sapsrv
    database SQL 2005

    check these links for the PSE error:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/fb993af7700577e10000000a11402f/frameset.htm
    PSE certification validity end
    post-processing steps are in the installation guide.

  • SAP System Message: Syntx error or generation error in a screen

    dear sap basis gurus,
    i am currently having problems signing on to our DEV server. i get this error message:
    <SID>: SAP System Message
    Syntx error or generation error in a screen.
    it won't let me log on.
    there were no changes made on the server (i.e., profile parameters) lately. it was working really fine after our support package level upgrade about 5 months ago.
    have you encountered this problem before? please help me as there we have two imminent go-lives.
    thank you very much in advance.
    best regards,
    albert

    hello nick, ashok,
    thank you very much for your responses.
    i have already resolved this issue by just freeing up some space from our disks. not one of them was full though.
    i hope i would no longer encounter the error message.
    again, thank you.
    best regards,
    albert

  • Bapi_po_create1 is giving same system messages  multiple time in the joblog

    Hi Experts,
    Bapi_po_create1 is giving same system messages multiple times in the job log when we ran the program in the background
    can u plz suggest how to prevent these multiple appearances of same messages.
    I am pasting the code below whn i ran this program in backgorund job log is having the messages.
    Date       Time     Message text                                                                 Message class Message no. Message type
    08/06/2009 08:11:53 Job started                                                                       00           516          S
    08/06/2009 08:11:53 Step 001 started (program ZZZTEST, variant &0000000000008, user ID BREDDY)        00           550          S
    08/06/2009 08:11:54 Commitment plan contains no account assignment data                              MECP          020          S
    08/06/2009 08:11:54 Commitment plan contains no account assignment data                              MECP          020          S
    08/06/2009 08:11:54 Status "Initial Block" of material 20111 does not allow external procurement      ME           053          E
    08/06/2009 08:11:54 Status "Initial Block" of material 20111 does not allow external procurement      ME           053          E
    08/06/2009 08:11:54 Source not included in list despite source list requirement                       06           722          E
    08/06/2009 08:11:55 Pricing/euro: Attention: Euro Customizing not maintained                          VH           777          S
    08/06/2009 08:11:55 Pricing/euro: Attention: Euro Customizing not maintained                          VH           777          S
    08/06/2009 08:11:55 Status "Initial Block" of material 20111 does not allow external procurement      ME           053          E
    08/06/2009 08:11:55 Purchase order still contains faulty items                                       MEPO          000          E
    08/06/2009 08:11:55 Job finished                                                                      00           517          S
    Edited by: bhavani prasad kotharu on Aug 6, 2009 3:09 PM

    HERE IS THE CODE OF THE PROGRAM, WE R JUST PASSING SOME PO DATA TO THE BAPI_PO_CREATE1,ON RUNNING THIS PROGRAM IN BACKGROUND SAME SYSTEM MESSAGES ARE APPEARED MULTIPLE TIMES,----
    REPORT zzztest.
    DATA :    lwa_bapimepoheader TYPE bapimepoheader
             ,lwa_bapimepoheaderx TYPE bapimepoheaderx
             ,li_bapimepoitem TYPE STANDARD TABLE OF bapimepoitem
             ,lwa_bapimepoitem TYPE  bapimepoitem
             ,li_bapimepoitemx TYPE STANDARD TABLE OF bapimepoitemx
             ,lwa_bapimepoitemx TYPE bapimepoitemx
             ,li_conditions TYPE STANDARD TABLE OF komv
             ,li_return TYPE STANDARD TABLE OF bapiret2
             , n TYPE c
    PARAMETERS: p1 TYPE c AS CHECKBOX.
    IF p1 = 'X'.
      lwa_bapimepoheader-doc_type = 'NB'.
      lwa_bapimepoheader-purch_org = 'NA00'.
      lwa_bapimepoheader-pur_group = 'C02'.
      lwa_bapimepoheaderx-doc_type = 'X'.
      lwa_bapimepoheaderx-purch_org = 'X'.
      lwa_bapimepoheaderx-pur_group = 'X'.
      lwa_bapimepoitem-po_item = '10'.
      lwa_bapimepoitem-material = '000000000000020111'.
      lwa_bapimepoitem-plant = 'CA01'.
      lwa_bapimepoitem-vend_mat = '1000'.
      lwa_bapimepoitem-quantity = '10'.
      lwa_bapimepoitem-orderpr_un = 'M'.
      lwa_bapimepoitem-no_more_gr = 'K'.
      lwa_bapimepoitem-agreement = '4600000095'.
      lwa_bapimepoitem-agmt_item = '10'.
      lwa_bapimepoitem-pricedate = 'X'.
      lwa_bapimepoitem-price_date = '20071030'.
      lwa_bapimepoitem-no_rounding = 'X'.
      APPEND lwa_bapimepoitem TO li_bapimepoitem.
      lwa_bapimepoitemx-po_item = '10'.
      lwa_bapimepoitemx-po_itemx = 'X'.
      lwa_bapimepoitemx-po_itemx = 'X'.
      lwa_bapimepoitemx-material = 'X'.
      lwa_bapimepoitemx-plant = 'X'.
      lwa_bapimepoitemx-quantity = 'X'.
      lwa_bapimepoitemx-po_unit = 'X'.
      lwa_bapimepoitemx-orderpr_un = 'X'.
      lwa_bapimepoitemx-acctasscat = 'X'.
      lwa_bapimepoitemx-agreement = 'X'.
      lwa_bapimepoitemx-agmt_item = 'X'.
      lwa_bapimepoitemx-pricedate = 'X'.
      lwa_bapimepoitemx-price_date = 'X'.
      lwa_bapimepoitemx-preq_no = 'X'.
      lwa_bapimepoitemx-preq_item = 'X'.
      lwa_bapimepoitemx-no_rounding = 'X'.
      APPEND lwa_bapimepoitemx TO li_bapimepoitemx.
    DATA: lo_msg_handler  TYPE REF TO cl_message_handler_mm.
      CALL METHOD cl_message_handler_mm=>get_handler
        IMPORTING
          ex_handler = lo_msg_handler.
      lo_msg_handler->remove_all( ).
      lo_msg_handler->cleanup( ).
      CALL FUNCTION 'BAPI_PO_CREATE1' "in background task
           EXPORTING
             poheader   = lwa_bapimepoheader
             poheaderx  = lwa_bapimepoheaderx
             testrun    = 'X'
           NO_MESSAGING = c_x
           NO_MESSAGE_REQ = c_x
             no_authority = 'X'
           IMPORTING
             expheader  = lwa_bapimepoheader
           TABLES
             return     = li_return
             poitem     = li_bapimepoitem
             poitemx    = li_bapimepoitemx
             conditions = li_conditions.
    ENDIF.
    Edited by: bhavani prasad kotharu on Aug 6, 2009 3:38 PM

  • Questions about message logging and topic TTL

    We're in the final stages of testing our application. Basically a producer application is sending small, non-persistent messages once every 10 seconds and once every second to an auto-created topic. The consumer application(s) listening are then doing data display of this 1 second and 10 second data.
    Testing the client we noticed it complained of a single 10 second message not being received. We verified that the message was sent by the producer. My question is whether there is a logging setting on the IMQ server that could be used to log the receipt and delivery of every message, perhaps by JMSMessageID to a particular topic? The only idea we could think of is to use 'imqcmd metrics' to track the number of messages in/out, but this isn't as useful for us.
    Any ideas you could provide would be greatly appreciated.

    imqbrokerd does not support tracing at this level, so metrics is probably the best approach for now.
    If a subscriber is not getting a message it is usually because of one of the following:
    1. The message is expiring. If you are using message expiration make sure the clocks are synchronized between the clients and the server. imqbrokerd will log a message when it has expired messages.
    2. The subscriber was down when the message was produced (and it is not a durable subscriber).
    3. You have set a size limit on the destination or system wide that is resulting in messages being shedded as specified by the limit behavior.
    With non-persistent messages you can get an additional level of reliability by setting the following ConnectionFactory property to true:
    ConnectionConfiguration.imqAckOnProducethis adds a handshake between the server and client when a message is sent and provides a mechanism for imqbrokerd to propogate additional message production errors back to the client.
    The following document at sunsolve.sun.com provides more details:
    ID70117 Sun Java[TM] System Message Queue: Tuning 3.0.1 and 3.5 For Robustness
    Joe
    http://wwws.sun.com/software/products/message_queue/

  • Error message: "Logging into the account failed because an error occurred."

    Hello,
    We had an XServe G5 2.0 DP 5GB/80/2x250 running Mac OS X 10.3.9 Server with all updates as a main server for a school. The server provides Open Directory Master as well as File-Sharing (AFP and SMB) and e-mail services to about 30 teachers and 300 students. The user home directories reside on the server. A web server also runs on the machine. The students use a pool of laptops, which are configured with a local guest and admin account as well as access to the server-based home directories with Directory Access. The server had the OS running on the 80 GB hard drive and all data (Home directories, mail database, website, etc. were on the two mirrored 250 GB drives.) All was working well until...
    A few weeks ago, one of the two 250 GB died. We decided to use the opportunity to upgrade the server and set it up with 3 x 750 GB, two drives running as a mirrored pair to hold OS AND Data, the other as a stand-by unit to help replace a failing drive.
    We migrated the OS and all data from the previous drives without a problem. Since now, all data is residing on one pair of drives, we put the data from the old "Data" drive in a folder on the root level of the new HD pair. We wrote a script that launches at startup which creates the symlink in /Volumes/Data to link to /Data. We thought that with this, all would be well.
    However: When any user tries to log into his account from any iBook (10.3.9 or 10.4.11) (wirelessly), he gets the message:
    "Logging into the account failed because an error occurred. The home folder for the user account is located on an afp or smb server. contact your system administrator for help"
    If the user logs in to the guest account on the iBook, then accesses his home directory via file-sharing, he can see (read/write) all his data. So, the data and privileges seem to be OK, as well as Open Directory working correctly. Mail and the web work well also, as does logging in to a user account from one of the PC's (wired).
    Can anyone make any suggestions as to how to fix the situation? Currently, the users are using the guest accounts and accessing their data via filesharing, as well as using webmail for their e-mail, but this is a major nuisance.
    Any help will be greatly appreciated.
    Best regards,
    Alain Chammas
    A user trying to access his account from a PC (wired) has no problems.

    A good number of folks are having problems with this same error message at login, and nobody seems to have found a fix.
    I believe I have stumbled upon, if not a solution, at least part of the answer. If you're logged into a 10.4 workstation, open a Finder window and click the "Network" icon. The first time you do this, you'll only see "Library" and "Servers" icons, but if you let it sit for a moment, other folders will magically appear. One of these is "My Network" which is the critical part.
    In Workgroup Manager, edit one of your users' home directory configuration. There's a URL piece, usually "afp://server.domain.com/Users" (which is what shows up in the window when you click on the "Home" tab for that user), and then there's a "Home" path that is usually something like "/Network/Servers/servername/Users/username". Trouble is, you've noticed that 10.4 doesn't put servers into the "Servers" path, but rather into the "My Network" path.
    So, if you change that "Home" path to read "/Network/My Network/servername/Users/username", it should work--with one caveat. Apparently 10.4 doesn't create the "My Network" path on a given client until you actually browse the network on that client. If you haven't logged into a 10.4 workstation and browsed the network, the "My Network" path won't be there, and you'll still get the error. Login as a local user, browse the network (so that the "My Network" folder shows up), logout, and then login as an Open Directory user, and it should work.
    I'm betting that 10.3, 10.4, and 10.5 all handle this issue differently, so if you're in a mixed-version situation, you may have to experiment to find a workable fix.
    Derndest thing I ever saw.

  • Error in local message system; message 009999000035 not complete

    Hello All.
    I have configured Service desk in SolMan 7.0 which has patch level 14 and also configured in Satellite systems. I am using SM_...._BACK RFC connection in BCOS_CUST table. The user used by SM_...._BACK have the following roles in SolMan
    SAP_SUPPDESK_CREATE,SAP_SV_FDB_NOTIF_BC_ADMIN
    and SAP_SV_FDB_NOTIF_BC_CREATE.
    However, when I try to create support message (Help --> Create support message) in satellite system, i am getting Error in local message system; message 009999000035 not complete.
    I have also checked for Product_ID parameter which is not existing.
    One important thing is, I can create support message in satellite system if I give SAP_ALL in that RFC user using in SM_...._BACK connection in SolMan.
    So, this shows clearly that it is an issue with role/authorization.
    Please suggest me !!
    Thanks in advance.
    Regards,
    Satish.

    Hmm not really. Profiles for the roles are also generated?
    Those roles/profiles should be sufficient to create support messages.
    Even though you assigned SAP_ALL and it worked afterwards I cannot imagine you got an auth. problem here anymore.
    When assigning SAP_ALL did you really assign SAP_ALL to the RFC user or did you assign another user (who got SAP_ALL auth.) to the RFC connection?
    The user who was logged on to the satellite system when the support messages have been created (with and without SAP_ALL assigned to the RFC user) has always been the same?
    Just to make sure: did you set NO_USER_CHECK = X in Sol Man tx: DNO_CUST04?

  • System Message Shows in  Future Date

    Dear Experts,
    In Our SAP BI System , The System Message SM21 shows in Current & future date both problem messages
    SAP Server OS and SAP BI Application Time and date both are in sync
    The BI system which is connected to ECC PRD also having a sync
    Remote monitoring are not configured in this system,
    System Log: Local Analysis of GEEPASBIPRD                  2
    Date : 22.12.2010
    Time     Type Nr  Clt User         TCode Priority Grp N Text
    10:02:54 DIA  001 350 GPKWTHOFI03                 BY  E Invalid parameter ObjTooLar
    10:04:07 DIA  001 350 GPKWTHOFI03                 BY  E Invalid parameter ObjTooLar
                       System Log: Local Analysis of GEEPASBIPRD                  3
    Date : 02.01.2201
    Time     Type Nr  Clt User         TCode Priority Grp N Text
    20:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    20:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    20:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    20:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    20:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    20:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    20:20:90           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    20:20:90           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    40:20:81           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    40:20:81           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    40:20:81           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    40:20:81           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    40:20:81           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    40:20:81           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    71:31:41           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    71:31:41           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    90:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    90:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    90:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    90:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    90:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    90:20:84           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
                       System Log: Local Analysis of GEEPASBIPRD                  4
    Date : 03.01.2201
    Time     Type Nr  Clt User         TCode Priority Grp N Text
    00:20:85           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
    00:20:85           35  BIWREMOTE                  hB  Y Missng:TSL1TE,hBY):154 EXE
                      System Log: Local Analysis of GEEPASBIPRD
              C o n t e n t s
    Content            Page         Start          End
    Selection criteria   1
                         2  22.12.2010 10:02:54 22.12.2010 10:04:07
                         3  02.01.2201 20:20:84 02.01.2201 90:20:84
                         4  03.01.2201 00:20:85 03.01.2201 00:20:90
                         5  02.01.3201 01:23:65 02.01.3201 90:40:42
                         6  03.01.3201 00:40:41 03.01.3201 11:62:24
                         7  02.01.4201 01:22:30 02.01.4201 90:40:42
                         8  03.01.4201 00:40:41 03.01.4201 11:62:24
                         9  02.01.7201 11:42:21 02.01.7201 31:71:95
                        10  02.01.9201 01:22:30 02.01.9201 81:41:10
                        11  03.01.9201 00:95:23 03.01.9201 11:11:94
                        12  02.01.A201 01:22:30 02.01.A201 81:41:10
                        13  03.01.A201 00:95:23 03.01.A201 11:62:24
                        14  02.01.E201 11:24:13 02.01.E201 71:50:52
                        15  02.01.I201 01:22:30 02.01.I201 81:41:10
                        16  03.01.I201 00:95:23 03.01.I201 11:62:24
                        17  02.01.R201 01:22:30 02.01.R201 81:41:10
                        18  03.01.R201 00:95:23 03.01.R201 11:62:24
    Contents            19
    Thanks
    Jai

    Hi Thahir,
    I deleted the SLOG and Restarted the system now its not showing the future date,
    Issue resolved.
    Thanks ,
    Jai

  • System message setting for delivery.

    Hi All,
    I need to set message VL 261 Free goods group not complete  as error message. I tried to do this setting at LE> shipping> system modification-->specify characteristic for system message.
    But when i am enter error message number 261 it is giving error " enter valid value". But when I am creating delivery I can see that message in log as information. can any one help on this.
    Thanks in advance.
    Regards
    Chetan

    Hi Chetan,
    for my understanding you can not switch "VL 261 Free goods group not complete as error message". If you look at the SAP customizing help you will see following information:
    "The maximum possible message category is predefined by SAP. For this reason some error messages only have a limited selection of message catogories that can be set. Use F4 Help to find the maximum possible message category from the sequence 'E', 'W', 'I', ' '."
    That means the message types predefined in customizing can be switched from error to warning and vice versa. BUT error messages not included can not be added or switched by customizing.

  • Macbook sleeps with long delay and tons of system messages

    It takes my MacBook Pro a long time to go to sleep (4 minutes or more). During this time thousands of messages are produced in the System log.
    There are so many of them that some messages are discarded. Some of these messages:
    05/10/2014 16:31:08.000 kernel[0]: [0x445334a000, 0x2000]
    05/10/2014 16:31:08.000 kernel[0]: [0x445335c000, 0x2000]
    05/10/2014 16:31:08.000 kernel[0]: [0x4453372000, 0x2000]
    05/10/2014 16:31:08.000 kernel[0]: [0x4453384000, 0x2000]
    05/10/2014 16:31:08.000 kernel[0]: *** kernel exceeded 500 log message per second limit  -  remaining messages this second discarded ***
    05/10/2014 16:31:09.000 kernel[0]: [0x2cb737000, 0x3000]
    05/10/2014 16:31:09.000 kernel[0]: [0x2cb84c000, 0x8000]
    05/10/2014 16:31:09.000 kernel[0]: [0x2cb855000, 0xb000]
    05/10/2014 16:31:09.000 kernel[0]: [0x2cb862000, 0x3000]
    What do these messages mean?
    I have tried, without success, the following things:
    - reinstall the system
    - perform a disk verification
    - repair file permissions
    - boot in safe mode
    What I have not tried is a hardware check, because I couldn't. (Starting up with D pressed has no effect and starting up with option-D pressed initiates the check, but this is aborted because my machine doesn't support it.)
    The behavior takes place with hibernation, not with "unsafe sleep".
    Machine: MacBook Pro 15" mid-2014, 2.4 GHz Core i5, 8GB memory, with Mac OS 10.9.5.
    System messages at the start of the sleep:
    05/10/2014 16:30:58.114 loginwindow[39]: CGSSetWindowTags: Invalid window 0xffffffff
    05/10/2014 16:30:59.404 WindowServer[100]: _CGXHWCaptureWindowList: No capable active display found.
    05/10/2014 16:31:05.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
    05/10/2014 16:31:07.000 kernel[0]: hibernate image path: /var/vm/sleepimage
    05/10/2014 16:31:07.000 kernel[0]: efi pagecount 125
    05/10/2014 16:31:07.000 kernel[0]: hibernate_page_list_setall(preflight 1) start 0xffffff80e6133000, 0xffffff80e6173000
    05/10/2014 16:31:07.000 kernel[0]: hibernate_page_list_setall time: 258 ms
    05/10/2014 16:31:07.000 kernel[0]: pages 2044563, wire 264046, act 663382, inact 612315, cleaned 46 spec 1409, zf 27302, throt 0, compr 476063, xpmapped 40000
    05/10/2014 16:31:07.000 kernel[0]: could discard act 0 inact 0 purgeable 0 spec 0 cleaned 0
    05/10/2014 16:31:07.000 kernel[0]: WARNING: hibernate_page_list_setall skipped 87800 xpmapped pages
    05/10/2014 16:31:07.000 kernel[0]: hibernate_page_list_setall preflight pageCount 2044563 est comp 43 setfile 3898605568 min 4294967296
    05/10/2014 16:31:07.000 kernel[0]: [0x13b4cc3000, 0xbc9000]
    05/10/2014 16:31:07.000 kernel[0]: [0x13d0f85000, 0xbbc000]
    In between: thousands of these kernel messages
    System messages at the end of the sleep:
    05/10/2014 16:31:11.000 kernel[0]: [0x4624b20000, 0x1000]
    05/10/2014 16:31:11.000 kernel[0]: [0x4624b2c000, 0xe2000]
    05/10/2014 16:31:11.000 kernel[0]: *** kernel exceeded 500 log message per second limit  -  remaining messages this second discarded ***
    05/10/2014 16:34:25.000 kernel[0]: hibernate_page_list_setall(preflight 0) start 0xffffff80e6133000, 0xffffff80e6173000
    05/10/2014 16:34:25.000 kernel[0]: hibernate_page_list_setall time: 296 ms
    05/10/2014 16:34:25.000 kernel[0]: pages 2048039, wire 266098, act 663683, inact 612389, cleaned 40 spec 1946, zf 27756, throt 0, compr 476127, xpmapped 40000
    05/10/2014 16:34:25.000 kernel[0]: could discard act 0 inact 0 purgeable 0 spec 0 cleaned 0
    05/10/2014 16:34:25.000 kernel[0]: WARNING: hibernate_page_list_setall skipped 87800 xpmapped pages
    05/10/2014 16:34:25.000 kernel[0]: hibernate_page_list_setall found pageCount 2048039
    05/10/2014 16:34:25.000 kernel[0]: IOHibernatePollerOpen, ml_get_interrupts_enabled 0
    05/10/2014 16:34:25.000 kernel[0]: IOHibernatePollerOpen(0)
    05/10/2014 16:34:25.000 kernel[0]: encryptStart 9c190
    05/10/2014 16:34:25.000 kernel[0]: bitmap_size 0x3f784, previewSize 0x24f278, writing 2047182 pages @ 0x32ab8c
    05/10/2014 16:34:25.000 kernel[0]: encryptEnd 95f4600
    05/10/2014 16:34:25.000 kernel[0]: image1Size 0x1430d000, encryptStart1 0x9c190, End1 0x95f4600
    05/10/2014 16:34:25.000 kernel[0]: encryptStart 1430d000
    05/10/2014 16:34:25.000 kernel[0]: PMStats: Hibernate write took 192562 ms
    05/10/2014 16:34:25.000 kernel[0]: all time: 192562 ms, comp bytes: 6044094464 time: 5593 ms 1030 Mb/s, crypt bytes: 4112823408 time: 6386 ms 614 Mb/s,
    05/10/2014 16:34:25.000 kernel[0]: image 0 (0%), uncompressed 6044090368 (427032), compressed 4284058624 (70%), sum1 9a59058d, sum2 8143d3e0
    05/10/2014 16:34:25.000 kernel[0]: zeroPageCount 97178, wiredPagesEncrypted 155568, wiredPagesClear 109748, dirtyPagesEncrypted 1210326
    05/10/2014 16:34:25.000 kernel[0]: hibernate_write_image done(e00002e8)
    05/10/2014 16:34:25.000 kernel[0]: sleep
    05/10/2014 16:34:25.000 kernel[0]: Wake reason: EC LID0
    05/10/2014 16:34:25.000 kernel[0]: SMC::smcHandleInterruptEvent WARNING status=0x0 (0x40 not set) notif=0x0
    05/10/2014 16:34:38.000 kernel[0]: full wake (reason 1) 23 ms
    05/10/2014 16:34:38.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
    05/10/2014 16:34:38.000 kernel[0]: Previous Sleep Cause: 5
    05/10/2014 16:34:38.000 kernel[0]: wlEvent: en1 en1 Link DOWN virtIf = 0
    05/10/2014 16:34:38.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    05/10/2014 16:34:38.000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x1400 ****
    05/10/2014 16:34:38.616 WindowServer[100]: CGXDisplayDidWakeNotification [42269999693223]: posting kCGSDisplayDidWake
    05/10/2014 16:34:38.617 WindowServer[100]: handle_will_sleep_auth_and_shield_windows: Ordering out authw 0x7ff86b72bc70(2000), shield 0x7ff868f6d380(2001) (lock state: 2)
    05/10/2014 16:34:38.618 WindowServer[100]: handle_will_sleep_auth_and_shield_windows: errs 0x0, 0x0, 0x0
    05/10/2014 16:34:40.949 loginwindow[39]: ERROR | -[LWBuiltInScreenLockAuthLion closeAuthAndReset:] | Attempted to remove an observer when not observing
    05/10/2014 16:34:40.000 kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 5 on so 0xffffff8027164178
    05/10/2014 16:34:41.000 kernel[0]: AFP_VFS afpfs_DoReconnect:  doing reconnect on /Volumes/.TMBACKUP-1

    Thanks for the tip. I checked out the link. The issue is not that my log files are large but it's that log messages (the same message over and over again) are being constantly written to that Console application - I guess by syslogd - at a crazy rate per second which is causing the CPU to spike and causing my Free RAM to go from say 3GB to a few MB's within a matter of seconds. I actually can't find a log file on my system (via Spotlight search or Terminal "grep" searching) that has the hundreds and thousands of messages showing up in the Console log app. syslogd just gets "crazy" and pretty much takes over the CPU and depletes my computer free RAM when handling those:
    0x0-0x18018.com.apple.logic.pro358 ARGH: preNdx < 0 (-1073741821)
    messages.

  • How can I see in EP7.0 a system message placed in ECC 6.0 ?

    Hi everybody. I have one question. We have an EP 7.0 and one ECC 6.0 .  In older versions 4.7 there is an IAC called sysmsg that you can use to show the system message you have placed in the ERP server through an iview in the portal. IT´s really usefull for the users in order to take care of notifications like "Travel Application is blocked for 2 hours" or whatever kind of messages you want to show to end users.
    I´ve been reading ALL the threads  I could found about this , but I can´t find the answer. I don´t want to send a broadcast message to all EP users, I only want to show the system messages that you put using SM02 in the ERP but in an iview in the portal.
    Any ideas?
    Thanks in advance and best regards.

    Hi Jose
    Please see the following Wiki's for some help with this
    Brodcast messages to logged on users in Portal(Part1)
    Brodcast messages to logged on users in Portal(Part2)
    Best wishes
    Stuart

Maybe you are looking for