System monitor root, -1

Hello!
I would like to ask what does mean "root, -1" user. Sometimes after starting kde in the table of processes in system monitor are present processes with no name and its owner is root, -1. Could anyone tell me what is going on.
Last edited by marokin (2010-02-03 20:56:53)

If you are posting here, I assume you don't have a G5 but the Intel Mac Pro instead.
http://www.apple.com/support/macpro/
http://www.apple.com/macpro/specs.html
And it needs to be seen by someone and taken in and let AppleCare deal with it.
Or you do have a G5 and ended up in a "wrong" forum.
http://www.apple.com/support/powermac/

Similar Messages

Gnome-system-monitor mislabels root partition

Since the recent Gnome 2.30.2 upgrades the other day, Gnome System Monitor has oddly started mislabeling my root partition in the "file systems" tab. Every other partition is labeled as "/dev/sda2," "/dev/sda5," etc. But my root partition is labeled "/dev/disk/by-uuid/42d32269-85ca-4567-a3ha-71hj8e0f7838." So the mode of labeling is not consistent, using one type of label for every partition and another type just for my root partition.
The problem with this is that the columns are automatically resized to fit the entire length of the uuid label, pushing information I want to see off screen and forcing me to scroll over to see it or resize the window or or resize the column every time, etc..
I see that the gnome-system-monitor package is still at 2.28.1, so it wasn't upgraded. What could cause this? It's an annoying bug and was not a problem before I did the 2.30.2 upgrades yesterday. I also notice that the Gnome Disk Utility and Gparted do not do this; they label my root partition /dev/sda1.
Last edited by cb474 (2010-06-24 05:09:31)

gnome-system-monitor uses libgnomesu for this. It's a library that does the same things as sudo does.

Host Information is not updated in System Monitoring tab

Hello Team Mates,
I have installed SOLMAN 7.1 SP06, also we have completed the Managed system configuration.
Now while doing the configuration of system monitoring, I am not getting the any update related to HOST,
apart from its database. Instance monitoring is working properly.
solman_workcenter -->technical monitoring --> system monitoring --> monitor system,
Also in the solman_workcenter-> root cause analysis ->host analysis ; data is not getting updated.
Please guide us on the same, ASAP. Kindly check the attachment.
Thanking you in advance,
with best regards,
Deepak
Points will be rewarded to the right answers.

hi,
outside recovery follow the steps here Outside Discovery on Solution Manager 7.1
And also Please check whether your host agents are working, you can done this in managed system configuration -> connect diag agents -> check host agent,
Please update.
Thanks
Jansi

My mac become so slow i can't use any app. All the time there is sound of hard drive but no swapping is reported by system monitor.

Hi Folks,
recently my Mac after latest upgrade of Maverics 10.9.2 degraded performance dramatically to the point that when I switch from one app to another i should wait 30-40 seconds to get the response back from the System. The Hard drive is in use each time I click a mouse button. Sounds like an excessive hard drive usage usually caused by swapping. But System monitor shows Free memory ) Swapping and plenty of Idle CPU.
I tried to find the Process that might over uses the disk but all appear to be Ok. i couldn't spot any process that would over use the IO.
IO looks normal from System Monitor.
I checked the Apple Support whenever it is a defected hard disk issue but according to serial this Mac is not under disk replacement program.
Any tips on what should I do to find the root cause?
Mac specifications:
27-inch Mid 2010
MEMORY 4GB 1333 MHZ DDR3
Software OS X 10.9.2 (13C64)
ATI Radeon HD 5750 1024 MB graphics
Intel 5 Series Chipset:
Vendor:          Intel
Product:          5 Series Chipset
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Physical Interconnect:          SATA
Description:          AHCI Version 1.30 Supported
ST31000528AS:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          ST31000528AS
Revision:          AP25
Serial Number:                      9VP87BKN
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Rotational Rate:          7200
Medium Type:          Rotational
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Thanks in advance
Emile

I have plenty of disk space 350 GB free.
I don't run excessive number of apps as you can see in top I have plenty of free Physical RAm plenty of idle CPU and IO is Ok too Swap is not in use means there is no lack of any resources
Even I f I quit all applications and use just safari the problem exists.
Processes: 174 total, 2 running, 6 stuck, 166 sleeping, 813 threads                                                11:35:05
Load Avg: 0.79, 0.78, 0.46 CPU usage: 0.47% user, 1.42% sys, 98.10% idle
SharedLibs: 134M resident, 0B data, 21M linkedit. MemRegions: 23450 total, 1500M resident, 121M private, 411M shared.
PhysMem: 3342M used (539M wired), 747M unused. VM: 418G vsize, 1310M framework vsize, 0(0) swapins, 0(0) swapouts.
Networks: packets: 25114/24M in, 16805/2740K out. Disks: 67293/2231M read, 15086/343M written.
I don't run any MAc keeper like apps nor antiviruses . I don't trust them. I f I need to clean something I will do it myself
Happens in switch between all apps even between the tabs in safari
The only symptom I have so far is noisy hard disk
each time i switch apps or windows I hear hard disk doing something.
Makes me think it might be hard disk problem but fsck doesn't show any issue
no bad secktors etc.
According to all diagnostics everything is Ok
That's kind of worries me not to be able to find the bottleneck having more than 20 years experience with UNIX

The system monitor in DSL

http://petepr.drivehq.com/dsl/screenshot_a.jpg
What is that system monitor in the top right? Iwanniiiiiiit

conky draws on the root window per default. ROX-Filer, on the other hand, creates an overlay over said root-window. Hence conky is *below* the Desktop. Same happens when you use Gnome or E17. There is no real fix to that except running conky in its own window, IIRC. Or to disable Icons. Who needs them anyway? I know I don't.
Last edited by mucknert (2007-08-29 06:48:32)

Can I change system administrator (root) password?

I have forgotten my name and password to get into my MacBook. I have imputed the OS X disc and found the reset password bit but it only gives me option to reset my iPhone or system administrator (root) but on mac support it says not to click that root option? So confused can't someone help? Can I click the root option or will it wipe files? Thanks

Hi Dray,
I've not seen that, but depening on OSX version, see if any of this helps...
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Utilities from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access the Menubar at top.
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Reset Password from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Reset Password.
Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/
Then Reset your Keychain...
http://support.apple.com/kb/TS1544
https://discussions.apple.com/thread/5225064?tstart=0

System monitoring - DSWP and RZ21

Hi all,
I am using sap solution managers workcenter "System monitoring" to set up the sap monitornig for a huge landscape. This works well, but to receive alerts (e.g. per mail) I additionaly have to do the settings in RZ21 (assign central autoreactions). This is not very comfortable because each setting has to be done twice (in dwsp and rz21) and there is also the risk to forget something. Do you know any other possibility? Do you know about plans to integrate the functions of RZ21 into DSWP?
Thanks
Michael

HI
We are setting up system monitoring is solman? i do have the same doubt as mentioned earlier
>
Karthik Bhirraju wrote:
> Please let me know whats the diffrence in configuring CCMS alerts in RZ21 (CEN- SOL) and configuring CCMS in(CEN- SOL) Solution Manager -> DSWP -> Solution Monitoring ?? is Solman-> Solution Monitoring a shortcu way or a WIZARD way to RZ21 (creating CCMSUSR, CCMSREG .. etc what ever we do in RZ21) or we need to configure RZ21 as prerequisite to configure solution monitorind in DSWP
can anyone guide me here? and what would this affect the RCA setup
jansi

System Monitoring / Administration asking for logon id

Each time I click on, "System Monitoring / Administration" in DSWP, a dialog box pops up asking me for a username and password. I've tried using the local system admin password, SAP*, my own SAP logon id, the J2EE_ADMIN user, etc.. but the dialog box just keeps popping back up. This doesn't happen under any other tab (i.e. Early Watch). If I hit cancel, I get the error below:
Logon failed
What has happened?
Call of URL http://sapsolman.mpfs.maines.net:8000/sap/bc/solman/defaultUser/graphic/solmangraphic.htm terminated due to error in logon data.
Note
Logon performed in system SMS.
Logon performed for client 100 and language EN.
What can I do?
Check the validity of your SSO ticket for this system.
If you do not yet have a user ID, contact your system administrator.
Error Code: ICF-LE-http-c:100-l:E-T:21-C:3-U:54-P:54-L:3
HTTP 401 - Unauthorized
Your SAP Internet Communication Framework Team
Please tell me what I need to do to fix this authorization issue. Thank you.

Hi,
When it pops up for a logon details, please check below to which system is it connecting? Then the communication user which is being used in both the Managed and Managing system will be locked. After unlocking the user in the Managed system the issue will be resolved.
Thanks & Best Regards,
Raghavendra.
Edited by: Raghavendra B Deshpande on Nov 25, 2009 7:10 AM

System monitoring - alert email notification

Hello Sapers,
I already set up system monitoring in our Solution Manager but i would like to receive mail if any alert occur. Unfortunatelly I did not find any way how to do it through Solution Manager. I guess there must be something like edit -> Automatic email transmission where I set up sending Earlywatch and SL reports to my mailbox, but how to set up alert email notification?
I also tried another way - setting up CEN (in our sollution manager) in RZ20, there i created monitor where i have desired alerts from all remote systems configured in SMSY (i have not used sapccm4x or any other ccms agent), also tried autoreaction method on local and it is working fine (SCOT is set up) but when i tried create and assign central autoreaction method (sapnote 429265) during assigning i receive error "no ccms agent avalable for system" and it is not working. Do I really need configure SAPCCM4X on all remote systems when i want to use central autoreaction? I dont feel very confortable with this solution. I think there must be some other smarter way (maybe in solution manager).
We also tried to connect our RZ20 monitor set to nagios (used in our company to monitor non sap servers and email notification), but we are not able to compile the ccms nagios plugin uder 64bit. AIX 5.3.
I also heard little bit about ALM (Alert management) but dont know anything about forwarding alerts from RZ20 to ALM and transmitting email from there. But I think this sollution would be the most difficult from all mentioned above.
Thank you very much for any help

Josef,
Somewhat chasing the point here - when you have the Solman and you look in your CCMS and you can see the other systems - it is all RFC data and not actually on the Solution Manager (the only local MTE's are those tha belong to the Solution Manager). For the Solution Manager to Centrally Auto-React to threasholds (act as the CEN System), the information needs to be passed to the Central System through the agents.
If you want to do email threasholds on your remote systems, you can configure it on each of the systems individually without agents as this is a CCMS Function that any SAP System can do - but this is not Central Auto-Reaction. This is just actions taken on individual systems based on local MTE's.
To Centrally Auto-React - you have to add the agents so the information is passed to the CEN to react on.
I hope that this has clarified the situation a bit more. If this answers your question, please set this thread to answered.

System Monitoring - add SAP PI 711 system

All,
I'm facing problems when I want to add the ABAP stack of my SAP PI 7.11 system...
I use Monitoring Setup Guide (CEN SAP NetWeaver 7.0 EhP 1, SPS 08) to do my setup --> Entering Monitored ABAP Systems with Release SAP NetWeaver 7.1 in ST03G.
Using transaction RZ21--> technical infrastructure --> Configure central system --> create remote monitoring entry.
Next, I choose for DualStack for the component type to be monitored. I fill in all the necessary data and save the entry.
Nothing happens and I do not see the system appearing in the system overiew list.
For single-stack ABAP systems, no problems appear and I can add them.
Please advice.
Thanks.

Dear Dimitri,
The problem is that these products
01200314690800000134 -- 9 -- I -- C
01200314690800000134 -- 34 -- I -- C
These products will need to be reverted to S ( SAP BASIS) from C (NON_SAP BASIS)
Since these are primary keys, you will need to copy and change the + existing record, and then delete the old one.
Once this is done, you will have to perform the following:
Call transaction SMSY. Chose System Groups and Logical Components.
Expand 'Logical Components' - 'SAP NETWEAVER'. Expand the product
instances 'Mobile Infrastructure' and 'Process Integration'. For all
logical components that have systems repeat the following procedure.
1. Check if the logical component is used in solutions using the where
    used button. If no, you can continue with the next one.
2. If yes, note which systems are assigned to which role.
3. Go to change mode and remove the systems from the logical component
     by selecting system SPACE with the value help.
4. Save. Check if a warning says that System monitoring is active.
5. Add the same systems again.
6. Save.
7. If system monitoring was active in a solution the customer should
    run the system monitoring setup for the solution again.
If you are not comfortable making these changes, you can raise a message with SAP.
However once this is done, then the SIDs will be offered and selectable.
Regards,
Paul

Monitoring/Alerting Set up options in SM - System Monitoring

Comrades
When configuring Solution monitoring in SM 4.0 for our lanscape the customised CCMS monitor set (created in RZ20 of Target Sysem) needs to be imported during set-up system monitoring process
1.Is it possible to import the customised CCMS context in solution monitoring during set up?
2.In the current system monitoring configuration certain DB related monitors are not visible (displayed) though they are configured properly is something to be done ?
Also looking on the following alerting options E-mail,SMS and SNMP Traps from the SM 4.0.My understanding is E-mail and SMS are based on Central autoreaction methods on the Alert Monitor.
3.Is it possible to configure E-mail and SMS without CCMS Agents on Target Systems ? and Is there a way of configuring E-mail and SMS other than Central Auto Reaction Methods ?
4.Are there any prerequistes (Agents, Software, packages ) for configuring SNMP Traps from SM ?
I have done some reading and searching on these points and pretty unclear on these aspects.Kindly share your knowledge on this area.
Kindly Respond
Many a Thanks
Gnana

I managed to set up an account manually on the C7 but I had to trick the email application by entering an invalid email address and password. After it could not find my account it then opened up all the settings and permitted me to add the manual IMAP settings, reply to address and other details. After I committed the settings, the phone recognised the account as a gmail account and it locked down all the settings again so I could not go back and change them if wrong.
I was quite chuffed with myself for seemingly resolving all my issues.....but on using the new account settings I could not sync the gmail sent / bin folders. All the other folders synchronised fine and when I send email it has the correct reply to address. Strangely this matches the best results I obtained when connecting using the Mail for Exchange settings so am no further forward. I am a little confused by this as when I let the phone set up the Gmail account on it's own it can sync everything.....but I just can't
I am now hoping that the new software update (PR1.2) gets email working a little better....well when I eventually get it hehe.

System Monitoring - Solman 7 EHP1

Hi
Solution Manager 7.0 EHP1 / Windows 2008 / Oracle
Satellite System R/3 Enterprise extn set 110 / Solaris on Sparc / Oracle
I am having trouble configuring System monitoring on solution Manager. Here is what I have done
Added the satellite system to SLD, Configured data collector (RZ70) in the satellite system, Pushed data from SLD to SMSYS (automatic transfer).
Installed CCMS agent + CCMSPING agent in satellite system. Checked connectivity in solman with RZ21. Connectivity is fine.
Created Monitor sets and monitors in CCMS for monitoring satellite system. Client data is visible in CCMS.
Created a solution in DSWP. Created logical component in SMSY. Assigned the logical component to the solution. Now I can see the data in DSWP.
Here are my questions
==================
1. In DSWP, everytime I have to view data, I have to click on "Setup System Monitoring" to view the alerts in the satellite system
I see a red alert reading for instance availability. Similarly,
In the system monitoring workcenter, I see the status of both the solution manager and the satellite system greyed out with a cross. When I move my mouse over it, it reads, no CCMSPING data available.
Any idea as to why this happens?
2. For what I see after I click on "Setup System Monitoring" I have parameters which I can configure. I see default values for these parameters. Is there like a recommendation or a template which can be used to setup these monitoring parameter values?
3. I have configured the ccmsping in the solution manager (for the solution manager) however the ccmsping service refuses to run. It throws a error reading "The system could not find the file specified". The ccmsping exe file is present in the location stated. Are there other files that this is looking for?
4. While registering the agent in the satellite system, I first registered with the CSMREG id. It failed with the message,
INFO: [SMG:040:CSMREG] connected to SMG, host sapsm.NA.XXX.NET, System Nr. 00, traceflag [ ]
INFO: SMG release is 701 , (kernel release 701 )
        RFC Error Info:
         message:
         status: EXCEPTION AUTHORITY_NOT_AVAILABLE RAISED
         intstat:
      Go Ahead anyway? n/[y] :
INFO: handling destination SAPCCM4X.SAPR3PR1.00
ERROR: can't register at SMG. RfcRc = 2, AUTHORITY_NOT_AVAILABLE
RFC Error Info for SALF_CSM_AGENT_REGISTER
message:
status: EXCEPTION AUTHORITY_NOT_AVAILABLE RAISED
intstat:
I then did this with a dialog user. That worked. Agent was registered in solution manager. Any idea on why this error would show up with the CSMREG? I am concerned about issues which can come up when the password for the dialog user changes.
I am not sure how to upload screenshots of what i see, probably if i do that, it will be easy to relate to the issue which I am mentioning here. Is there a way I can do that?
Let me know if you need any more information from my side to understand this.
Ideas will be appreciated.
thanks
Ravi

Hello Ravi,
Additionally you will want to look at SAP Note 1175058 - Problems with CCMSPING in SAP Solution Manager, especially
c) Ensure that the message server host name in the monitoring options of CCMSPING and the message server of the corresponding main instance of the relevant system is the same in the SAP Solution Manager landscape
(SMSY). Important: The monitoring options of CCMSPING must not be configured using an IP address.
Regards,
Paul

System monitoring work center and CEN system

Hi everybody.
I'm setting up the central monitoring, using SSM as monitoring system. I'm also having a look at the work center for system monitoring; but I don't find how to link the central monitoring capabilities with this dashboard.
I mean, it looks the central monitoring does not provide any advantage to work with this work center, am I right? Anyone has experienced this?
Thanks for your answers!!
Fermí

Hi!
I've done finished this issue!
Please follow steps below:
1. Create activity type in T-Code: KL01
2. Go to KP26 to create the realtionship between Cost Center and Activity.
Now you can see new activity in Costing tab.
Regards!
Woody.

System Monitoring in Solution Manager

Friends
1.System monitoring for one of the satellite systems has been configured in solution manager (through DSWP - Setup system monitoring) using RFC connections(Read and Trusted RFCs generated in SMSY).
2.Installed CCMS Agent on the satellite system and registered to solution manager system.
RZ21 -> Remote Agent Status shows online.
Should something else to be done (settings, background jobs, configuration )in Solman or satellite system to make communication to satellite via CCMS agent primary for system monitoring?
How do i get to see the satellite system's monitoring context in Solution manager?
Please help me out
Thanks
Gnana

Friends
1.System monitoring for one of the satellite systems has been configured in solution manager (through DSWP - Setup system monitoring) using RFC connections(Read and Trusted RFCs generated in SMSY).
2.Installed CCMS Agent on the satellite system and registered to solution manager system.
RZ21 -> Remote Agent Status shows online.
Should something else to be done (settings, background jobs, configuration )in Solman or satellite system to make communication to satellite via CCMS agent primary for system monitoring?
How do i get to see the satellite system's monitoring context in Solution manager?
Please help me out
Thanks
Gnana

Solution Manager System Monitoring of a CE 7.10

Hi
I am trying to setup a Solution Manager Monitoring Solution for a CE 7.10 Enviroment.
I have already setup CEN in SOLMAN.
I have registered CE Systems with a sapccmsr j2ee agent.
I have setup the JCO RFC Connection in CE.
I have created the TCP/IP Connection to the JCO Connection in Solman.
I have set the TCP/IP Connection in RZ21 as the J2EE Customizing Destination.
The solution involves only 1 Logical Component with 3 CE Systems.
When I go to the solution manager setup and try to configure the MTE Nodes for my solution I cannot get the MTE context while clicking in Activate Monitoring for other Software Components
I choose Java Application Server, choose my server, choose CEn but when i have to choose the context of the MTE i get an empty list.
IF i go Activate Monitoring for Other Servers and choose the server I get the contexts of the remote server, but I can only choose one.
So how can I see the context of the CE servers in the Software component part?
Ty.

Hi,
Have you defined and added corresponding logical systems for the respective satellite systems?
Here is the sequence of steps you've to do:
in SMSY:
1) Define server, DB, Systems
2) Generate READ, TMW, TRUSTED RFCs to the satellite systems
3) define logical systems and assign the satellite system to it
in Solution_Manager:
1) define new solution
2) add the logical system into the solution
If these steps are successful, you should be able to see the satellite system in SYSTEM MONITORING in Solution_Manager.
Have you already done these steps?
After performing these steps:
Solution_Manager>choose relevant solution>operations setup>Solution Monitoring>System monitoring>Activate monitoring> choose the system and activate monitoring.
Your system will then appear.
Does this help any way?

System monitor root, -1

Similar Messages

Maybe you are looking for