System recognizes external drive but does not eject disk

I connected external DVD drive to imac and clicked on 'Eject Remote Disk' from File. Nothing happened.
System recognizes external drive but does not eject disk. What should I do next?
<Re-Titled By Host>

Run this command this in the Terminal app:
drutil eject -drive external

Similar Messages

TS1369 After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch.

Time Machine will not let me restore from recent backups. I can see them on the external drive but will not restore sooner that June of 2013! Any suggestions?

Time Machine will not let me restore from recent backups. I can see them on the external drive but will not restore sooner that June of 2013! Any suggestions?

All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

My iPhone 5s recognizes my fingerprint but does not always unlock.

Hi,
My iPhone 5s recognizes my fingerprint but does not always unlock. Sometimes it will unlock, and sometime it won't. It does not even give the "try again" message. Unrecognized fingerprints will give the "try again" message. Entering the passcode works fine.
Any ideas on correcting this?
Thanks.

Hello there, whitewinter.
The following Knowledge Base article provides some great insight on troubleshooting issues for Touch ID:
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How do I eject a DVD that just keeps turning in drive but will not eject?

How do I eject a DVD that just keeps turning in drive but will not eject?

check out Kappy's user tip:
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this:
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following: /usr/bin/drutil eject.
If this fails then try this:
Boot the computer into single-user mode. At the prompt enter the same command as used above.
To restart the computer enter "reboot" at the prompt without quotes.

DVD super drive problem-does not eject

am facing strange problem with my DVD super drive. It does not eject when idle for some time and when its empty. I have a dual core Mac Pro with snow leapord OS. I have replaced it, updated the OS.. nothing fixes the issue.
it only ejects when I restart the mac pro.
Please help as it does not respond to eject key on keyboard also.
Thanx in advance.

If nothing else works for you, when you hear sound of drive trying to open after pressing keyboard eject button, strike the box of mac pro on both sides of the drawer with clenched fists.
I have been doing this for years.

HT4527 After copying my iTunes library across from an external drive it does not show in iTunes. Why?

My old computer died. I had my iTunes library backed up to an external drive. I have followed the steps outlined and moved the itunes folder from the external to the music folder on my new imac. I have checked that the addres is correct but when I opened itunes non of my music shows up. I can find a track file click on it and then it will open up, play and stay in itunes. But I would spend the rest of my life importing the songs one by one. Help ?

Thank you for your prompt response - I did as you said and did a drag and drop into the iTunes window - it imported and got my album art from the net. When I started Itunes with the shift key down I was prompted to choose a library but since I copied over the media folder and not the library folder I was unable to select that so I guess I will have to create a new library and add in all the music, videos, etc. unless I wait for my laptop and export the library or at least that seems to be the case? In short, all my data (iTunes media folder) is on my external drive and can be added to the blank iTunes screen but I can not choose a library folder. Is there anyway around completely making all those playlists again? I am not sure my laptop will survive the shop with data intact and really hate to start over on those.
In an unrelated question - I collect old TV shows from the 1950's. Can I make playlists within the home video folder somehow? In other words like one for Quiz shows, one for comedies, one for police and detective shows, etc. while I am remaking all my playlists for my music if I end up having to go that route?
Once again thank you for helping me out. I am not too Itunes savvy and really appreciate you taking the time to answer.

External drive error, does not mount: "Partition map check failed because no slices were found"

Hardware: MacBook late 2009 (2.26Ghz Core 2 Duo 2 GB RAM 250GB HDD) running 10.9.4, Hackintosh MacPro (3.29Ghz i3 16GB RAM 1TB HDD) running 10.9.4, external 3 TB Seagate Backup+ drive
As you can can see from the screenshot below,
The external drive was initially plugged in a Netgear WNDR4500 router by USB to be used as NAS. I was in the middle of updating the firmware when there was a power outage. Upon reboot, the drive no longer mounts, whatever it is plugged in (router, Mac, PC, etc.).
I ran DiskUtility on the partition map and volume, same errors. Here's an what I see:
As you can see above, the "Mount" icon is greyed out and I get the error message "Partition map check failed because no slices were found". If I select "the Archive" partition, the "Mount" icon is not greyed out but clicking it doesn't do anything. My HDD is basically unreadable.
I issued a few Terminal commands to see what was the problem, here are the results:
What can I do?
Currently running analysis on TestDisk and it is 50% after 48hrs. Need some help!

@ Allan Eckert: Unfortunately, reformatting is out of the question, I have 5 years of work on this!
@ Loner T: Yes, the firmware did successfully upgrade after router reboot and a bit of troubleshoot.
Thanks for the quick replies. Keep 'em coming!

Boot Camp 3.0 recognises Mac HFS drives but does not list all folders

Hi
I have just done a clean install of Boot Camp/Windows XP using the Boot Camp 3.0 drivers that come with Snow Leopard, and was pleased to find native support for Mac Drives (HFSJ). Whilst all of the Mac drives in my Mac Pro are recognised and can be opened and explored in Windows explorer, a number of folders in one of the drives didn't show up. I could access them by typing the exact path in windows explorer, but when using the mouse to open the drive a number of folders could not be found. Furthermore, windows applications, such as media libraries, would not pick up any files in the folders that couldn't be seen in explorer.
I went back to OSX to check that all of the folders were indeed present and they were. So in the end I reverted to using my Macdrive software again and all of the folders showed up again and worked as expected. So, it may be that the new bootcamp drivers are not all they are cracked up to be.
Anyone else experienced similar issues, or got any clues as to what I might need to get this working right?
Thanks
Nick

I am having that issue, but haven't worried about it since I've only booted to windows 2 times since the upgrade. Both times I've experienced a much more aggravating problem. Both times in order to reboot to OSX I have to use the install disc to repair the OSX drive because something renames it to "disk1s2" plus some counts are invalid. I use Macdrive, but since SL the mac volumes appear just as any other drive icon. Using Parallels or Fusion works as it always has, automatically shutting of Macdrive which leads me to think that Macdrive may be the culprit. Gonna try disabling it completely while running virtual and see if that makes it work. If not it'll just be another aspect of my Mac that Apple updates have made useless.

My external LaCie drive gets an error message "the disc you inserted was not readable by this computer." The only options offered are "ignore" or "eject" Disk Utility sees the disc but does not give a repair option. What can I do?

When I plug in my external LaCie drive I get an error message "the disc you inserted was not readable by this computer."
The only options offered are "ignore" or "eject"
Disk Utility sees the disc but does not give a repair option.
What can I do?

The good thing about mac-centric resellers such as OWC, is they have people on staff that can answer questions without you buying things first. They also have how-to information, and instructions are included in many of their products. I saw a link to watch a DIY video in one of their pages; an example of a RAID (with its own power supply) is shown on their drives page. Also a few in there, with no power supplies, for less money.
If I were looking to backup and perhaps also have a partition for a system clone, I'd consider something like one of these: http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
Some ideas on the RAID backup methods appear in google search, some of the pages are ideas and concepts; and the better ones also warn about using RAID for the only backup plan.
Oh, OWC has live chat. Haven't tried it, nor have I bought anything from them. I have what appears to be two products from them, but have not used either. One is in a box as-new, but has only USB2.0 ports & my Macs needed FW400/800. It has been said their RAM is a good way to upgrade, too. But I can't confirm!
A 'RAID-ready' unit for backup may be more versatile for just that, but I have not checked into these details. I use single HDDs in powered enclosures, and usually manually make backup clones to FW drives, of bootable OS X systems. Some of the OWC raid-ready use eSATA ports so that may not be viable for a computer without them.
The unused in-box external drive I have is like the base model in the link above. However mine is USB2.0 (maybe) and won't boot my older Macs due to hardware variance; and my preference would be for FireWire options, these models do offer that. But the one I have does not. Dual 500GB HDDs, and they could be used in tandem as a RAID. That would be a choice set up in software. I'm not sure and not interested enough to read up just now.
My backup method is not automatic, or a moving backup plan, if I don't get a move-on and make full system clones. I do make copies of photos and documents the manual way, to USB external drives; and occasionally backup to DVD or CD media. And USB flash, that helps to move files between computers without need to use file sharing via wi-fi. {Like Why fly? Walking is better exercise unless one is a bird. Squawk!}
https://www.google.com/#q=raid+backup+mac
Depending on the ports in your Mac, you may be able to use other cables to attach between a backup or externally enclosed hard disk drive with multiple partition and bootable clone in one of them. Not sure about the Thunderbolt, and where that is the main port, adapters are required to access other devices, as allowed.
Anyway, I am going on and on, yet not really saying anything.
My ideas would not be all that interesting to follow as a backup
plan when matching available newer hardware to task, but you
can get some into better ideas if you are not in a rush. Get a
good setup and then look into more an betterer stuff.
Good luck & happy computing!

I am trying to get itunes to burn a disc on a Samsung external drive but I get a message disc burner or software not found. Itunes 11.1.5.5 does recognize a bought disc in the drive.

I am trying to get itunes to burn a disc on a Samsung external drive but I get a message disc burner or software not found. Itunes 11.1.5.5 does recognize a bought disc in the drive.

Try HT203242: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
tt2

HT201250 Time Machine does not recognize external drive at start up

I have an external WD 2TB drive which I use as my Time Machine back up drive. When I restart the iMac desktop the Time Machine drive does not start automatically and I must open Time Machine each time and remember to identify the external drive that contains my Time Machine back up data. Is there some way to make this drive the default Time Machine back up device when the system starts? It is annoying to have to remember to do this each time my machine restarts. I have a drive icon that displays as "My Book" on restart where the Time Machine icon is located but this icon is yellow and my Time Machine drive icon is blueish green. Once I set the correct drive it will go into the mode to refresh the backup (usually in 118 seconds) and then once the backup is updated then the icon become blueish green and all works normally. Please help! Thx Tom

I called Apple tech support and went through the recommended actions with doing the disk check with the Utilities and all checked out okay. They had to ask the senior support advisor and was told that it does not automatically start the Time Machine drive until the next scheduled back up. There was a misconception that this drive SHOULD be identified as the Time Machine drive on boot up but that is not the case. I waited for the next schedule back up after reboot and it DID recognize the drive and it appears to be working fine.
The Time Machine does start on boot up but does not indicate that the Time Machine is recognized until the back up is done then it is back on cycle and will operate normally until the next reboot where it will then refresh during that cycle and become recognized in green. Until that time the drive will appear as a yellow icon for the disk.
Oh, by the way, the drive has external power on my WD 2 TB drive.

How come my external hard drive is no longer visible in finder even after ticking it in preferences? it shows in the disk utilities but does not allow me to find a problem or fix the problem? Please help.

it shows in the disk utilities but does not allow me to find a problem or fix the problem? Please help. also my external hard drive is a seagate free agent go, 500GB. it is visible on my tv but has no files in it… i'm scared i've lost everything?

Honestly i cannot remember sorry, i got it like 5 maybe 6 yrs ago and just started downloading things to it as the memory on the computer started filling up and when i wanted to see photos/videos on my TV.
My wife did tell me after i had written this post that she did try and record TV to it as it was plugged in. I think by doing so somehow has deleted everything. It reads on my TV yet has no files in it but won't show up on my computer. hope this helps.
Starting to think it is going to cost more to retrieve files on it than it will be to buy a newer and larger one.

HT1751 I have followed the steps to back up my itunes library to an external hard drive but when I try to drag my library to the hard drive it does not work. Any suggestions?

I have followed th steps to back up my itunes library to an external hard drive but when I try to drag the itunes folder to the hard drive it does not let me. Any suggestions?

Go through the below forum with similar issue and follow the process mentioned by "Macjack" in the beginning.
https://discussions.apple.com/thread/4499820

I have reinstalled Acrobat Pro 9 following a hard drive re format. It opens just fine but does not recognize my serial number. My computer is running Windows 7 64 bit

I have reinstalled Acrobat Pro 9 following a hard drive re format. It opens just fine but does not recognize my serial number. My computer is running Windows 7 64 bit

Hi 12msonti,
Please try the following:
Delete the Adobe PCD folder and caps.db file:
Windows: \Program Files\Common Files\Adobe\Adobe PCD
\Program Files\Common Files\Adobe\caps\caps.db
Launch Acrobat and enter the serial number and check.
Regards,
Rave

System recognizes external drive but does not eject disk

Similar Messages

Maybe you are looking for