System returned to ROM by error - a system error, PC 0x41E84BA8

Hi, I have a router that rebbot itself.  Can anyone know how to resolve this problem?
 This is the output message:
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 18:13 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T11, RELEASE SOFTWA
CAMBRA-LA-LUKE uptime is 31 minutes
System returned to ROM by error - a System Error, PC 0x41E84BA8 at 16:33:16 PA Tue Nov 11 2014
System image file is "flash:c2800nm-adventerprisek9-mz.151-4.M4.bin" Last reload type: Normal Reload
This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to [email protected]
Cisco 2811 (revision 1.0) with 509952K/14336K bytes of memory. Processor board ID FTX1431AJTX
11 FastEthernet interfaces

It's possible that you've got a problem in your IOS release. I would upgrade to 15.1.4M9 and see if the problem goes away. If that doesn't do it, I would open a case with TAC and submit the latest crashinfo file to see if they can figure out what the problem might be. When you start getting into obscure system errors causing a reload, troubleshooting becomes much more difficult.

Similar Messages

  • CiscoWorks: Howto get inventory report includes System returned to ROM

    Ia m using RME 4.3. I want to get the inventory report that display the switch information in sh ver command i.e. System returned to ROM by power-on
    Thanks

    You can't do this with reports, but you could use Netshow to run "show version | include System returned", then look through the job output to collect the results.

  • External system returned different number of lines than received error

    Hi,
    While posting invoice in MIRO,i am getting the following error,
    "External system returned different number of lines than received"
    Please help in resolving this error.
    Thanks
    Srini

    Hi,
    Can you please check this sap note..
    Note 1499319 - Ext system returned different number of lines than received
    Regards

  • The operating system returned error 23(Data error (cyclic redundancy check).)

    My Stored Procedures and Jobs Showing this Error. Even though i can able to access the data throgh SSMS in Database Engine.Please help on this.
    Executed as user: RMS\Administrator. The operating system returned error 23(Data error (cyclic redundancy check).) to SQL Server during a read at offset 0x000006684a2000 in file 'F:\RMSLiveData\RMS.mdf'. Additional messages in the SQL Server error log and
    system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors;
    for more information, see SQL Server Books Online. [SQLSTATE HY000] (Error 823).  The step failed.
    Thanks 
    RehaanKhan. M

    DBCCCHECKDB('DBNAME',REPAIR_ALLOW_DATA_LOSS)
    For crying out loud! Don't you have any shame!
    There are situations where you may have to run DBCC CHECKDB with the option REPAIR_ALLOW_DATA_LOSS, but it is not the first thing you shold try if the database seems to be corrupt. Particularly, you should first make sure that you work on a copy of the database
    files. REPAIR_ALLOW_DATA_LOSS means that DBCC CHECKDB has carte blanche to throw all pages it can piece together - which could be about all data pages if it is that bad.
    Corruption siuations are very difficult to assist with in forums, because there can be a lot of stake. The only advice I can give is to restore the database from a clean backup. If you don't have a clean backup, you have a problem. The database may still
    be saved, but you need an expert on site to help you, if you have never worked with this before. Advice given in this forum applied haphazardly can result in more damage that you already have.
    But, oh, one thing: this type of corruption are always due to hardware errors like bad disks or bad memory sticks. So just restoring the database is not enough. Finding new hardware is important too.
    Erland Sommarskog, SQL Server MVP, [email protected]
    Actually on the same disk there are other Databases Stored and they work Properly and Backup also can be taken for that Databases. But, for this particular database only this error is happening when iam trying to take backup. But data retrieval and access to
    front end application happening as usual.  Please help on this.
    RehaanKhan. M

  • The operating system returned error 170(The requested resource is in use)

    Hello Experts,
    We have a Sharepoint farm where we are receiving OS Error 170 for many days. It results in database shutdown/Start because required transaction file is not available.
    The operating system returned error 170(The requested resource is in use.) to SQL Server during a write at offset 0x0000029495e000 in file 'F:\MSSQL10_50.INST1\MSSQL\DATA\****.***. Additional messages in the SQL
    Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately
    Write error during log flush.
    Error: 9001, Severity: 21, State: 4.
    The log for database 'DBNAME' is not available
    We have checked the Anti Virus but all data files are excluded. We have also disabled the anti virus for some time but still issue persist.
    This is a Virtual Machine and no VM snapshot backup is running during the time window.
    Please help!
    Thanks in advance.
    Regards,
    Divesh Mathur

    Hello Experts,
    We have a Sharepoint farm where we are receiving OS Error 170 for many days. It results in database shutdown/Start because required transaction file is not available.
    The operating system returned error 170(The requested resource is in use.) to SQL Server during a write at offset 0x0000029495e000 in file 'F:\MSSQL10_50.INST1\MSSQL\DATA\****.***. Additional messages in the SQL
    Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately
    Write error during log flush.
    Error: 9001, Severity: 21, State: 4.
    The log for database 'DBNAME' is not available
    Hello,
    I sense a disk issue here( I am not sure).Log for database is not available seems when data needs to be written on log file it was not avaialble.Can you check with storage team that disk on which SQL server files reside is OK
    Secondly did you run DBCC CHECKDB for your database in picture can you paste result of it.
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • [823] [HY000] [Microsoft][ODBC SQL Server Driver][SQL Server]The operating system returned error 1450(Insufficient system resources exist to complete the requested service.) to SQL Server.

    Hi,
    I am facing an issue while loading fresh data into SQL server database.
    we are able to load data into staging area, but while processing stored procedures system face bellow error message :
    [823] [HY000] [Microsoft][ODBC SQL Server Driver][SQL Server]The operating system returned error 1450(Insufficient system resources exist to complete the requested service.) to SQL Server during a write at offset 0x00000243bd0000 in file 'E:\SQLDB\DBName.mdf'.
    Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC
    CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
    we use windows 2008 R2 with SQL server managment studio 2008.
    Appreciate your suggestion.
    Thanks in advance.
    Best Regards,
    Manorath 
    Manorath

    Hi Manorath,
    Based on my research, this issue can be occurred in the following scenarios:
    You are running a DBCC command on a large database. For example, you are running the DBCC CHECKDB statement on the database. At the same time, you run many DML statements on the database.
    You create a database snapshot for a large database. At the same time, you are running many DML statements on the database.
    In these scenarios, the SQL Server service stops responding. The DBCC CHECK statement is never completed, and you receive the error message repeatedly.
    This issue occurs because the sparse file for a database snapshot file has exceeded the file size limitation in NTFS file system. When the operating system error 1450 occurs, SQL Server enters an infinite retry loop.
    To fix this issue, please download and install Cumulative update package 1 for SQL Server 2008 Service Pack 1. Besides, because the fixes are cumulative, each new release contains all the hotfixes and all the security fixes that were included with the previous
    SQL Server 2008 fix release. We recommend that you consider applying the most recent fix release that contains this hotfix.
    Reference:
    http://support.microsoft.com/kb/967164
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • The Operating System returned Error 27(The drive cannot find the sector requested.)

    On a Windows 2008 R2 server running SQL 2008 Standard on a Raid 5, when performing a backup on the databases via copy to another local drive I receive and The operating system returned error 27(The drive cannot find the sector requested.) to SQL Server during
    a write at offset 0x0000002fd204000 in the file F:\SQLDATA\Email_Images.mdf.   The server is a HP DL380p Gen8.  I've contacted HP thinking this was a Hardware issue but HP ensure me its not and to contract Microsoft support.

    Hi,
    Unfortunately, the available information is not enough to have a clear view of the occurred behavior. Please offer us what backup method you are using, did you want to backup
    the data to the CSV, the origional error you have got.
    1. The best method would be to have separate disk drive for each cluster SQL instance and add the disk to the specific SQL group and add it to the dependency of the SQL resource.
    There would be less overhead with this process other than having to create two disks, one of each instance
    2. You could consider creating a file sharing resource on cluster and add the backup disk to this resource group and use it to back up the databases of both the instances
    to single disk. The down side of this method would be, all the databases backups will fail if the fileshare resource goes down. You cannot use GUI to take the backup, need additional setup/maintenance for the fileshare resource group
    http://support.microsoft.com/kb/224967
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • The operating system returned error 21(failed to retrieve text for this error. Reason: 15105

    Hello everybody, 
    I have a huge database over windows 2003 server and sql server 2008 r2, all of them with all update, no firewall, no antivirus, no any server feature/role installed. 
    Over the last 2 months I suddently start getting the following error:
    The operating system returned error 21(failed to retrieve text for this error. Reason: 15105) to SQL Server during a read at offset 0x000000000da000 in file 'S:\TempDB\tempdb.mdf'. Additional
    messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB).
    This error can be caused by many factors; for more information, see SQL Server Books Online.
     I have the TEMP database split over 5 partitions on 5 different SAN disk.  beggining size of each partition fix to 20 GB with autogrow 10%.  Single Instance, around 15 DB. 
    The space on each hard disk does not reach 60%. 
    I got the above error when all temp files reach 27 GB approx. 
    I already ran a check disk, checkDB and everything says no error found, but I still got same error. 
    Does anyone know what could cause something like this?
    note, when getting the above error, the only way to fix it, because I cannot do any select on any DB is to restart the service, so each temp file start again at 20 GB and everythign seems to be fine until reach the size again. 
    Gilberto H.

    The operating system returned error 21(failed to retrieve text for this error. Reason: 15105
    Hello Gilberto,
    See System Error Codes (0-499) for error code 21:
    ERROR_NOT_READY
    21 (0x15)
    The device is not ready.
    Could be an issue with your storage system
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • ORA-28500: connection from ORACLE to a non-Oracle system returned this message: ORA-02063: preceding line from OWB_75

    ORA-28500: connection from ORACLE to a non-Oracle system returned this message: ORA-02063: preceding line from OWB_75
    Scenario:
    I am having difficulty getting ODBC connection between Oracle OWB app with an 11gR2 DB (running on a VirtualBox Linux) and SQL Server 2008 running directly on the host. (Windows 8)
    I am trying to take a SQL Server 2008 feed into Oracle Ware house Builder, and think(!) I have read everything and configured it in accordance (but I presume not given 3 days of failed attempts to fix it). I have also read several blogs, hence there might be a few more settings in the configuration files than the formal documentation says, but these have come from blogs that have “Solved” problems for other similar situations.
    The environments:
    HOST:
    Name: RESOLVEIT-PC
    IP: 192.168.1.80
    Windows 8 (64bit) , with system DSN ODBC connection ACME_POS created with 32 bit ODBC set up (This setting still shows up fine in the 64 bit ODBC).
    GUEST VM:
    Name: OraDBSvr.com
    GUES fixed IP Address: 192.1.200
    Oracle VirtualBox (4.2.16)
    Oracle Redhat Linux 6 (x86)
    Oracle 11gR2 Enterprise Edition (11.2.0.1.0)
    ODBC: Freetds driver
    Configuration files:
    initacmepos.ora
    HS_FDS_CONNECT_INFO = 192.168.1.80/SQLEXPRESS/ACME_POS
    HS_FDS_TRACE_LEVEL = 0
    HS_FDS_SUPPORT_STATISTICS=FALSE
    HS_RPC_FETCH_REBLOCKING= OFF
    HS_FDS_FETCH_ROWS = 1
    HS_FDS_SHAREABLE_NAME = /usr/local/lib/libtdsodbc.so
    set ODBCINI=/opt/odbc/odbc.ini
    # set <envvar>=<value>
    odbc.ini
    [ACME_POS]
    Driver     = FreeTDS
    Description = ODBC Connection via FreeTDS
    Trace       = 1
    Servername  = 192.168.1.80
    Database    = dbo
    odbcinst.ini
    [PostgreSQL]
    Description                        = ODBC for PostgreSQL
    Driver                   = /usr/lib/psqlodbc.so
    Setup                    = /usr/lib/libodbcpsqlS.so
    Driver64                              = /usr/lib64/psqlodbc.so
    Setup64                              = /usr/lib64/libodbcpsqlS.so
    FileUsage                           = 1
    [MySQL]
    Description                        = ODBC for MySQL
    Driver                   = /usr/lib/libmyodbc5.so
    Setup                    = /usr/lib/libodbcmyS.so
    Driver64                              = /usr/lib64/libmyodbc5.so
    Setup64                              = /usr/lib64/libodbcmyS.so
    FileUsage                           = 1
    [FreeTDS]
    Discription             = TDS driver (Sybase / MS SQL)
    Driver                           = /usr/local/lib/libtdsodbc.so
    # Setup                         = /usr/local/lib/libtdsS.so
    FileUsage                           = 1
    CPTimeout               =
    CPReuse                 =
    [oracle@oraDBsvr etc]$
    freetds.conf
    #   $Id: freetds.conf,v 1.12 2007-12-25 06:02:36 jklowden Exp $
    # This file is installed by FreeTDS if no file by the same
    # name is found in the installation directory. 
    # For information about the layout of this file and its settings,
    # see the freetds.conf manpage "man freetds.conf". 
    # Global settings are overridden by those in a database
    # server specific section
    [global]
            # TDS protocol version
    ;              tds version = 4.2
                   # Whether to write a TDSDUMP file for diagnostic purposes
                   # (setting this to /tmp is insecure on a multi-user system)
    ;              dump file = /tmp/freetds.log
    ;              debug flags = 0xffff
                   # Command and connection timeouts
    ;              timeout = 10
    ;              connect timeout = 10
                   # If you get out-of-memory errors, it may mean that your client
                   # is trying to allocate a huge buffer for a TEXT field.
                   # Try setting 'text size' to a more reasonable limit
                   text size = 64512
    # A typical Sybase server
    [egServer50]
                   host = symachine.domain.com
                   port = 5000
                   tds version = 5.0
    # A typical Microsoft server
    [ACME_POS]
      host = 192.168.1.80
      port = 60801                                # also tried 1433
      instance = SQLEXPRESS
      tds version = 8.0
      client charset = UTF-8
    tsql -LH 192.168.1.80
         ServerName RESOLVEIT-PC
       InstanceName SQLEXPRESS
        IsClustered No
            Version 10.50.4000.0
                tcp 60801
                 np \\RESOLVEIT-PC\pipe\MSSQL$SQLEXPRESS\sql\query
                via RESOLVEIT-PC,0:1433
    Oracle listener:
    [oracle@oraDBsvr log]$ cat /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    # listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    # Generated by Oracle configuration tools.
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = acmepos)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (PROGRAM = dg4odbc)
    (HS = OK)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = oraDBsvr)(PORT = 1521))
    ADR_BASE_LISTENER = /u01/app/oracle
    [oracle@oraDBsvr log]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 16-SEP-2013 13:57:41
    Copyright (c) 1991, 2009, Oracle.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=oraDBsvr)(PORT=1521)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date                16-SEP-2013 13:50:34
    Uptime                    0 days 0 hr. 7 min. 7 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/oraDBsvr/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oraDBsvr)(PORT=1521)))
    Services Summary...
    Service "acmepos" has 1 instance(s).
    Instance "acmepos", status UNKNOWN, has 1 handler(s) for this service...
    Service "dw" has 1 instance(s).
    Instance "dw", status READY, has 1 handler(s) for this service...
    Service "dwXDB" has 1 instance(s).
    Instance "dw", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Oracle tnsnames.ora
    [oracle@oraDBsvr admin]$ cat tnsnames.ora
    # tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
    # Generated by Oracle configuration tools.
    dw =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = dw)
    acmepos  =
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521))
    (CONNECT_DATA=(SID=acmepos)
    (HS=OK)
    Oracle sqlnet.ora
    [oracle@oraDBsvr admin]$ cat sqlnet.ora
    # sqlnet.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    # Generated by Oracle configuration tools.
    NAMES.DIRECTORY_PATH= (EZCONNECT, TNSNAMES)
    ADR_BASE = /u01/app/oracle
    I can connect from the linux server to SQL Server, and query the database:
    [oracle@oraDBsvr etc]$ tsql -S acme_pos -U acme_dw_user -P acme1234
    locale is "en_US.utf8"
    locale charset is "UTF-8"
    using default charset "UTF-8"
    1> select last_name from dbo.employees;
    2> go
    last_name
    Davolio
    Fuller
    Leverling
    Peacock
    Buchanan
    Suyama
    King
    Callahan
    Dodsworth
    (9 rows affected)
    1>
    However, I can’t get a response through Oracle OWB , and I get:
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message: ORA-02063: preceding line from OWB_75
    In the hs log file I get:
    [oracle@oraDBsvr log]$ cat acmepos_agt_3821.trc
    Oracle Corporation --- MONDAY    SEP 16 2013 13:51:22.170
    Heterogeneous Agent Release
    11.2.0.1.0
    HS Gateway:  NULL connection context at exit
    [oracle@oraDBsvr log]$
    I am really stuck now and going round in circles and can’t see the wood for trees! Can anyone please help?!!
    Many Thanks.
    Rafe.

    Let us rewrite your ODBC DSN a little bit... Your current odbc.ini looks like:
    [ACME_POS]
    Driver     = FreeTDS
    Description = ODBC Connection via FreeTDS
    Trace       = 1
    Servername  = 192.168.1.80
    Database    = dbo
    Let us change it a little bit so that we only need one config file - no odbcinst.ini nor freetds.conf file anymore:
    [ACME_POS]
    Driver =/usr/local/lib/libtdsodbc.so
    Server = 192.168.1.80
    Database
    = dbo     ####  I have some doubts that you have a SQL Server database called dbo - one database that always exists is master - so as a test use master here or get the real database name of the SQL Server database you want to connect
    Port = 60801 ## make sure it really is the correct port - best would be to check on the SQL server and then try telnet <ip> <port> if you can connect to the SQL server
    TDS_Version = 8.0
    QuotedId=YES
    Especially the last 2 parameters are mandatory. TDS_Version specifies the TDS Version you have to use to connect to the SQL Server and QuotedID is required for DG4ODBC as it surrounds objevt names by double quotes.
    What happens now when you try to connect with for example isql - the ODBC test utility shipped with the ODBC Driver manager?
    In addition, could you please do me another favour and check the word size of DG4ODBC and the ODBC Driver Manager as well as the ODBC Driver - just execute:
    file /u01/app/oracle/product/11.2.0/dbhome_1/bin/dg4odbc
    file /usr/local/lib/libtdsodbc.so
    file < the patch to your libodbc.so library>/libodbc.so
    and post the output.

  • Error while System copy in Sapinist

    Hi All,
    i found an error while system copy ABAP + Java in SAPinist
    Error is
    CJS-00030  Assertion failed: in function (nothrow)
    {    NW.trace("NW.hasABAP(", nothrow, ")");    if (_hasABAP == undefined && !nothrow)
    {        ASSERT(arguments.callee, false, "NW(" + this.getSID() + ").hasABAP() is undefined");    }   
    NW.trace("NW.hasABAP() done: ", _hasABAP);    return _hasABAP;}NW(SAPID).hasABAP() is undefined
    ERROR 2010-09-24 10:52:45
    MUT-03025  Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2010-09-24 10:52:45
    FCO-00011  The step setLoadType with step key |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|2|0|
    NW_getDBInfo|ind|ind|ind|ind|4|0|
    NW_getLoadType|ind|ind|ind|ind|0|0|setLoadType was executed with status ERROR .
    any body have solution
    gagandeep

    Hi,
    Please make sure the hostname is not beginning with digit?
    We found similar problem reported by other customers that the error occurs if hostname begginning with digit.
    For details, please refer to note  611361.
    If it is difficult for you to change hostname,  please stop sapinst and modify the control.xml in your
    installation directory:
    search for the string  pfdir.getChildNodes  and repleace the
    line
    for (var it =
    pfdir.getChildNodes(/^START_[A-Z0-9]+_[a-zA-z][a-zA-Z0-9-]*$/);
    !it.isDone(); it.next()) {
    with the line:
    for (var it = pfdir.getChildNodes(/^START_[A-Z0-9]+_[a-zA-Z0-9-]*$/);
    !it.isDone(); it.next()) {
    It is not sufficient to just restart SAPinst in order to fix the problem.
    You have to restart the installation from scratch with the modified control.xml.
    You can restart the installer from DVD, choose the installation service
    on the first screen, and when the next screen appears, interrupt the
    installer. Then patch the control.xml in the installation directory and
    restart the installer.
    Best Regards
    Julia

  • ERROR: SAP-System not installed properly. (TADIR HEAD SYST missing.)

    Hi Experts I´m facing this issue.
    This is tp version 340.16.41 (release 640)                         
    HALT 20091029110915                                                
    ERROR: SAP-System not installed properly. (TADIR HEAD SYST missing.)
    ERROR: EXIT(16) -> process ID is: 9660                             
    tp returncode summary:                                             
    TOOLS: Highest return code of single steps was: 16                 
    ERRORS: Highest tp internal error was: 0233                        
    standard output from tp and from tools called by tp: 
    Any Clue?

    Hi,
    Was the system copied from another system? Or is this a new installation?
    If yes, did you run SE06 after the installation?
    What is the results of trans.log (generated from R3trans -d)?
    Also paste the contents of table TADIR in SE16.
    Best regards,
    Warren

  • Dblink oracle to postgres with dg4odbc | ORA-28500: connection from ORACLE to a non-Oracle system returned this message: ORA-02063: preceding line

    Hi, i'm trying to create database link from a database Oracle 11g to PostgreSQL with DG4ODBC, and unixODBC
    my configured to /etc/odbc.ini
    [PostgreSQL]
    Description = Test to Postgres
    Driver = psqlodbc
    Trace = Yes
    TraceFile = /tmp/sql.log
    Database = danieldb
    Servername =
    UserName = SA
    Password = password
    Port = 5432
    Protocol = 6.4
    ReadOnly = No
    RowVersioning = No
    ShowSystemTables = No
    ShowOidColumn = No
    FakeOidIndex = No
    my configured to /etc/odbcinst.ini
    [ODBC]
    CommLog=1
    Debug=1
    FileUsage=1
    Pooling=No
    Trace=1
    [psqlodbc]
    Description=PostgreSQL ODBC driver
    Driver=/usr/lib64/psqlodbcw.so
    CommLog=1
    Debug=0
    FileUsage=1
    my configured to /u01/app/oracle/product/11.2.0/xe/hs/admin/initPostgreSQL.ora
    HS_FDS_CONNECT_INFO = PostgreSQL
    HS_FDS_TRACE_LEVEL = 0
    HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbcpsql.so
    set ODBCINI=/etc/odbc.ini
    my configured to /u01/app/oracle/product/11.2.0/xe/network/admin/listener.ora
    Listener =
    (ADDRESS = (PROTOCOL = TCP)(HOST = oracle-poc)(PORT = 1521))
    SID_LIST_LISTENER =
            (SID_LIST =
                    (SID_DESC=
                            (SID_NAME=PostgreSQL)
                            (ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe)
                            (PROGRAM=dg4odbc)
                            (ENVS="LD_LIBRARY_PATH=/usr/lib64:/u01/app/oracle/product/11.2.0/xe/lib")
    my configured to /u01/app/oracle/product/11.2.0/xe/network/admin/tnsname.ora
    PostgreSQL=
            (DESCRIPTION =
                    (ADDRESS = (PROTOCOL = TCP)(HOST = oracle-poc)(PORT = 1521))
                    (CONNECT_DATA =
                            (SID = PostgreSQL)
                    (HS = OK)
    i'm try to created public database link :
    CREATE PUBLIC DATABASE LINK "orapos" CONNECT TO "SA" IDENTIFIED BY "password" USING 'PostgreSQL';
    when i used tnsping
    [root@oracle-poc admin]# tnsping PostgreSQL
    TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 16-MAY-2013 20:34:19
    Copyright (c) 1997, 2011, Oracle.  All rights reserved.
    Used parameter files:
    /u01/app/oracle/product/11.2.0/xe/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = oracle-poc)(PORT = 1521)) (CONNECT_DATA = (SID = PostgreSQL)) (HS = OK))
    OK (0 msec)
    and last i try to use the database link :
    SQL> select * from "tabel2"@orapos
      2  ;
    select * from "tabel2"@orapos
    ERROR at line 1:
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    ORA-02063: preceding line from ORAPOS
    Whats wrong with my configuration??
    Thank you and best regards,
    Daniel

    Mike,
    yes i've downloaded the ODBC driver manager..
    for HS_FDS_SHAREABLE_NAME i use /usr/lib/psqlodbc.so
    and i get this error when i call the db link(orpos)
    ERROR at line 1:
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    ORA-02063: preceding line from ORAPOS
    for HS_FDS_SHAREABLE_NAME = /usr/lib64/psqlodbcw.so
    and i get this error when i call the db link(orpos)
    ERROR at line 1:
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    c
    and when i used isql isql to call DNS(PostgreSQL) is success
    whats wrong with my config?
    about PostGres ODBC did you mean postgresql-odbc-08.04.0200-1.el6.x86_64 ??
    Thank you and best regards,
    Daniel

  • ORA-28500: connection from ORACLE to a non-Oracle system returned

    Hi All,
    My database is in 10.2.0.4 and has a dblink to sqlserver. The dblink works fine for normal queries.
    However when executing the following query from my oracle database
    SELECT ROWNUM, "ad2_id", my_name, "data"
    FROM "abc"@xyz.com
    WHERE "startDateTime" > (TO_DATE ('20100120', 'YYYYMMDD') - 1)
    AND "startDateTime" < TO_DATE ('20100120', 'YYYYMMDD')
    AND ROWNUM < 101
    I am getting the following error
    Note : Line 8 is "startDateTime" > (TO_DATE ('20100120', 'YYYYMMDD') - 1)
    ERROR at line 8:
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    ORA-02063: preceding line from xyz
    Note:
    1.data is of datatype VARCHARN(1000) and if we ignore that field I am able to get the output
    2. If I give the StartDateTime to a value without using to_date I am able to get the output.
    Could you please tell me what could be the problem ?
    Thanks in advance.

    user12061473 wrote:
    If the edit masks doesn't match how come I am able to get output for the below query
    SELECT ROWNUM, "ad2_id", my_name, "data"
    FROM "abc"@xyz.com
    WHERE "startDateTime" < TO_DATE ('20100120', 'YYYYMMDD')
    AND ROWNUM < 101
    The problem as far as I am know is if I try to select data and use both the where clauses I am getting the error.
    Which is
    SELECT ROWNUM, "ad2_id", my_name, "data"
    FROM "abc"@xyz.com
    WHERE "startDateTime" > (TO_DATE ('20100120', 'YYYYMMDD') - 1)
    AND "startDateTime" < TO_DATE ('20100120', 'YYYYMMDD')
    AND ROWNUM < 101
    Error
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    ORA-02063: preceding line from xyzThat's a different error. The error you posted above was
    "ORA-01861:literal does not match format string"which my posts addressed.
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    ORA-02063: preceding line from xyzis an entirely different message, related not to date formats but what looks like a distributed query. Unfortunately I am getting
    No Response from Application Web Server
    There was no response from the application web server for the page you requested.
    Please notify the site's webmaster and try your request again later. when I look up ORA-28500 and ORA-02063 in the on-line documentation right now :(
    Is your database connect string correct? The ones I use don't have .com attached to them.

  • ORA-28500: connection from ORACLE to a non-Oracle system returned this mess

    Hi,
    I scheduled a job .. got this error what could be the reason ?
    *** 2011-09-27 05:00:21.239
    *** SESSION ID:(273.6080) 2011-09-27 05:00:21.239
    *** CLIENT ID:([email protected]@Mozilla/4.0 (compatible; MSIE 8.0; Windows) 2011-09-27 05:00:21.239
    *** SERVICE NAME:(SYS$USERS) 2011-09-27 05:00:21.239
    *** MODULE NAME:(DBMS_SCHEDULER) 2011-09-27 05:00:21.239
    *** ACTION NAME:(XXINSERTKEY) 2011-09-27 05:00:21.239
    ORA-12012: error on auto execute of job 3311903
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied. {08001,NativeErr = 17}[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). {01000,NativeErr = 53}
    ORA-02063: preceding 2 lines from VISABG
    ORA-06512: at "APPS.XXDMIG_INSERT", line 3
    Thanks
    Vishwa

    ORA-12012: error on auto execute of job 3311903
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied. {08001,NativeErr = 17}[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). {01000,NativeErr = 53}
    ORA-02063: preceding 2 lines from VISABG
    ORA-06512: at "APPS.XXDMIG_INSERT", line 3Search MOS website for ORA-28500 and go through the docs!
    Ora-28500 with Ms Sqlserver - Not associated with a trusted SQL Server connection [ID 333775.1]
    How to Configure DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit to Connect to Non-Oracle Databases Post Install [ID 466225.1]
    Select From Non-Oracle Database Using Dg4odbc Returns Ora-28500 From Sqlplus [ID 1254254.1]
    ORA-28500: Login failed via Transparent Gateway when Connect to SQL Server 2000 on WinXP [ID 1165743.1]
    Error Ora-28500 and Sqlstate I Issuing Selects From a Unicode Oracle RDBMS With Dg4odbc To Mysql or SQL*Server [ID 756186.1]
    Thanks,
    Hussein

  • ORA-28500: connection from ORACLE to a non-Oracle system returned this mesg

    Hi,
    I am able to access ACCESS DB from local system having Oracle DB in the same machine using Oracle Heterogenious services.
    Now when I try to access from remote system, I am getting error message as mentioned.
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    [Generic Connectivity Using ODBC][Microsoft][ODBC Microsoft Access Driver]
    '(unknown)' is not a valid path.  Make sure that the path name is spelled
    correctly and that you are connected to the server on which the file resides.
    (SQL State: 00000; SQL Code: -1023)

    That's a specific problem with mapped drives, on metalink:
    ORA-28500: not a valid path via hsodbc over a mapped drive
    Doc ID: Note:266187.1
    Werner

Maybe you are looking for