System service not activate in managed system

Hello,
I am implementing SAP Solution Manager Diagnostics.
1. I am working in Phase 3 - Managed System Configuration
2. Connect Managed system.
When I start this step, I get this error :
Please import the actual support package for SAP_BASIS or activate the service 'SYSTEM' manually.
I am configuring XDS system which runs with SP13.
The "SYSTEM" services is already activated in the managed system (XDS).
Thanks for your help.
Best regards
P. Cuennet

Thanks Ruediger !
I have already implemented OSS Note 1172948.
I will apply correction of OSS Note 1309047.
Another question regarding the Extractor Framework (SMD - Extractor Framework Administration) :
1. Can you create your own Extractor ?
2. Does the Extractor depends on the SAP product ?
Example : Do I have specific extractor for BI systems and other for PI systems ?
Thanks in advance for your feedback
Best regards
P. Cuennet

Similar Messages

DSM service is not deployed in managed system

Hi pros,
in our system landscape, we installed DSM&BRFplus instance and multiple SAP ECC systems. The purpose is to use DSM to deploy BRFplus services to managed systems. However,
When deploying BFFplus functionsto a managed system via DSM. Although in DSM it says the function has been deployed successfully. But when checking in the managed system (via program "FDT_GENERATION_TOOL"), no functions were generated.
As a result, in the managed system I can not use API to invoke any BRFplus service. Can anyone help on this? I have checked RFC destination setup and added managed systems.
thanks

Hi Nisha/Vikram,
Thanks for your reply. I have executed above command as per the note 1907909.But again I am able to find the agent when I am executing step4 of managed system configuration (assign diag agant). I checked the error log in agent admin and I could find below error.
CIM_ERR_FAILED: User credentials are invalid or user is denied access <WBEMHttpRequestSender.java:398:newCommunicationException()>
For this I found that "slddsuser" is getting locked time and again.I am not aware as why this user id is getting locked repetitively.
Incorrect client ID. The stub is not connected yet.
Nested exception
is:
com.sap.engine.services.rmi_p4.P4IOException: Cannot make connection.
<P4ObjectBrokerClientImpl.java:726:getException()>
Unexpected exception.
Nested exception is:
com.sap.engine.services.rmi_p4.P4IOException: InterruptedException while
waiting fot the message.
<P4ObjectBrokerClientImpl.java:739:getException()>
Diagnostics agent is not connected to solution manager server,
connection status: DISCONNECTED
<SMDJNDILookupAgentSideImplementation.java:120:_lookup()>
Object not found in lookup of SMD_DataEnrichment_Registrator.
<ServerContextImpl.java:652:lookup()>
No
connection with the server. <ClientContext.java:2835:close()>
Please Suggest
Thanks
Aditya Roushan

SQL Server 2012 PowerPivot System Service not visible in Central Administration

Hi all,
I want to test PowerPivot 2012 on the following configuration:
- Windows Server 2008 R2
- Sharepoint 2010 - Enterprise edition
- SQL Server 2008 R2
- PowerPivot for Sharepoint<o:p></o:p>
As such, I downloaded SQL Server 2012 Evaluation and tried to upgrade SQL Server 2008 PowerPivot for Sharepoint instance to SQL Server 2012 PowerPivot
for Sharepoint. It didn't work as it's not possible to upgrade from Enterprise to Evaluation edition without a pid.
Next, I uninstalled the existing SQL Server 2008 PowerPivot for Sharepoint and I installed the SQL Server 2012 PowerPivot for Sharepoint.
I started to configure PowerPivot in Central administration (http://msdn.microsoft.com/en-us/library/ee210609.aspx) , but I got stuck at the 2nd step Create and Configure a PowerPivot
Service Application (http://msdn.microsoft.com/en-us/library/ee210685.aspx) in Central Administration.
The problem is that both SQL Integration Service and SQL Server PowerPivot System service are not visible in Central administration > Manage
services on server; however they are visible and running in Windows Administrative Tools > Services.
Do you think the services are missing in Sharepoint Central Administration because the Sharepoint configuration database is on SQL Server 2008, while the Powerpivot instance is on SQL Server 2012 ?

Thank you for the suggestion.
Meanwhile I have managed to solve the problem. What I've done:
- remove PowerPivot configuration using the Power Configuration Tool
- uninstall PowerPivot
- reinstall PowerPivot
- run PowerPivot Configuration Tool - I still got the parent service error
- remove PowerPivot configuration using the Power Configuration Tool
- run PowerPivot Configuration Tool - this time I received another error regarding the user that runs SQL Server Integration services
- check Sql Server Analysis Service account in Central Administration > Security > Service accountsManage service account - it seems that it was running under Local System account, although in Administrative Tools > Services it appeared to
be run by my domain account
- set a domain account for Sql Server Analysis Service in Central Administration
- run the PowerPivot Configuration Tool - this time it went smoothly.
The following url provides very useful info related to this type of issue: http://whitepages.unlimitedviz.com/2012/09/troubleshooting-and-removing-a-failed-installation-or-upgrade-of-powerpivot-for-sharepoint/

Plug-in status not performed in Managed system configuration

Dear Experts,
I had configured Managed system configuration in SolMan 7.1 SP10. I could find plug-in status " not performed" (grey) in solman_setup screen . Below screenshot for your reference. I had highlighted the plug-in status in blue for easy recognition. Please provide your valuable inputs.
Thanks,
Phani.

Hi Phani,
It is an open issue, pls see below; you might have to hang on till SP12 is available.
1954303 - The Plug-in Status (ST-A/PI) Grey for Managed System In Solution Manager SP10 and SP11.
A fix for this issue is planned for SP12, please note that this is subject to change
Regards,
Vivek

Metalink Note for Warehouse Management System Testcase Repository

Hi Friends,
Please share the meatilink note id for Warehouse Management System Testcase/ Testscripts Repository.
Thanks and Regards,
A

if you have open transactions, such as deliveries, then you may not be able to process them further.
But do you really close all transactions in a test system?
It will not have any harm to new created documents

System is not recorded in the system list

Hi all,
I am using BI 7 system which is connected with a source system of SAP R/3 system and there is no problem in the connectivity between these sytems.
When I tried to save a user defined ztable in BI system it shows an error below and also the description the error message would be. Please go through the following the let me provide the solution.
error: System BI& is not recorded in the system list.
Explaination of the error follows:
System BI7 is not recorded in the system list
Message no: TR638
Diagnosis
The current transport route configuration does not have the system BI7 in this current system list.
The transport route configuration was probably not maintained after the system setup, or was changed incorrectly.
Procedure for system Administration
The system Administration need to change, activate and distribute the transport route configuration accordingly. All systtems in the transport domain must be in the configuration.
Help this to solve.
--regards,
Durai.S

Hi,
Check in STMS whether your transport route is configured correctly or not. As per error message there is problem in your transport route.
Thanks
Sunny

Gummiboot error : file system is not a fat efi system partition (ESP)

I am at the point the guide tells me to do some specific work because I got UEFI motherboard
I did a fat 32 partition (type ef00) of 1G , which is my sda3
I created a dir /mnt/boot
I mounted the sda3 there
I type pacman -S gummiboot
result is File system /boot is not a fat efi system parttition file system
error: command failed to execute correctly
I don't get what I did wrong or what I understood wrong in the wiki. My partition is fat32, I try to install the bootloader gummiboot there but I take that error msg even if it's indeed formated as fat32.
edit: i've run the pacstrap -i /mnt base , everything worked smoothly and fast.
Last edited by bigboss (2013-10-10 19:07:22)

Hopefully you also say this line:
gummiboot install wrote:Copied /usr/lib/gummiboot/gummibootx64.efi to /boot/EFI/Boot/BOOTX64.EFI.
The \EFI\boot\bootx64.efi spot on the ESP is special. It is the "default" spot, which was originally intended to ensure that a UEFI USB flash drive, or other external media, would be able to boot. So in those cases, there is obviously not going to be a firmware entry as there potentially are for internal devices. So with external media, it finds the first ESP it can and automatically boots whatever is placed in that position. After a while, this feature started to be implemented to the internal devices as well.
This of course has its benefits, but also downsides. It means that you can actually boot UEFI without making an efibootmgr entry at all. You can instead set the machine to boot from the device (as though you were booting with the old MBR system) and have things set to UEFI. It will then, like the external devices, find the first ESP and then boot the \EFI\boot\bootx64.efi, whatever that is. But this also has made it so that different installers will "compete" for that default spot. So although gummiboot copying itself to that spot is in my opinion, convenient, I believe the microsoft installer will also make an attempt to write over this as well. Hence, it is better (but not essential) to have a firmware entry.
As far as the efibootmgr mounting issue you had, it may be that the info is not in the beginners guide simply because of the recent changes to the efibootmgr binary. See this section of the UEFI wiki page to understand what happened. Baiscally there is a new system in the kernel for EFI variables, and we have now switched fully. But I also agree with jasonwryan here that it is also likely that there just simply has to be a balance between providing a nice up to date layout of the installation process in the beginners guide, while not totally regurgitating every single but of information from the rest of the wiki.

Reporting Services not automatically starting. System event log 7009, Application event: 18456

For the past month (since Oct 11,2012) reporting services (SSRS 2008R2) is not starting after the server is rebooted. The service is set to automatically start and starts manually without a problem. The system event log contains the following error:
Event ID 7009: A timeout was reached (30000 milliseconds) while waiting for the SQL Server Reporting Services (MSSQLSERVER) service to connect.
SQL logs :
The SQL logs has many "Event 18456 Login Failed, State 38" errors when the database engine starts. I assume clients conections are failing because the databases aren't online yet. None of these 18456 errors coorespond to the account reporting services
runs under.
The SQL logs indication Event 7009 occures before the "ReportingServer" database is online so im assuming there is a dependancy but I don't know how to avoid this.
This problem is occuring on a number of our servers running SSRS (if not all)
Any ideas?
Paul

Hi A141695,
For Event ID 7009, you can try to do the steps below to resolve it.
    1. Click Start, click Run, type regedit, and then click OK.
    2. Locate and then click the following registry subkey:
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
    3. Right-click Control, point to New, and then click DWORD Value.
    4. In the New Value #1 box, type ServicesPipeTimeout, and then press ENTER.
    5. Right-click ServicesPipeTimeout, and then click Modify.
    6. Click Decimal, type the number of milliseconds that you want to wait until the service times out, and then click OK.
For example, to wait 60 seconds before the service times out, type 60000.
Quit Registry Editor, and then restart the computer. For more information about it, please see:
http://www.sqlservercentral.com/Forums/Topic850540-1550-1.aspx#bm851211
http://myitforum.com/myitforumwp/2012/08/22/configmgr-2012-sms_srs_reporting_point-component-failure/
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.

CUA Roles residing in Child system are not showing in Central System

I just hooked up CUA today and have linked 8 child systems to the central system. The 8 child system users and roles have already been established in the child systems. Do I need to run program susr_zbv_get_receiver_profiles in each of the child systems to get the roles in the child systems to show up in the Central System for each user? I tried this in one child system and it worked.
Or is there something else I need to do without going into each child system?
I tried this program susr_zbv_get_receiver_profiles in the Central system but it did not work.

are you looking for roles or profiles? profiles will not show up in the central system. If you run SCUL do you see anything? when you first added the child system did you use an SAP user that had the proper permissions? In both the child and the parent? There are two roles that the user must belong to to add the child to the parent they are SAP_BC_USR_CUA_SETUP_CENTRAL and SAP_BC_USR_CUA_CENTRAL.
If you have any question about the permissions of these user at the time you added the child to the parent I'd delete the child and re-add with either the above roles or a user with SAP_ALL in BOTH the child and the parent systems

Session recorded in LOGIC 8 on TDM system will not play on DIGI002 system

Hi
I am a beginner at Logic, but have used Pro Tools a lot. I got a session with all files from a studio that recorded it on a TDM Digidesign system. They saved the session for me and I imported it to my DIGI002 driven Logic 8 sytem. All the files can be seen, but some plugins are missing of course. HOWEVER, none of the tracks play with sound, despite the fact that they appear on the timeline and the waveforms can be seen. There are no meter readings on any tracks or on the master output. Do I need to do some sort of conversion????
thanks, desperate to get this mixed!
Cheers
BERT
Message was edited by: Bert Deivert

hi bert!
I´m by no means a pro-tools expert, but ran into a similiar problem where a student of mine wanted to mix a song recorded on a pro-tools TDM rig via the internal soundcard of his macboock.
solution might be:
open the environment, select all audio-objects, on the left-hand info-box choose DAE instead of TDM.
then it should work. check all the outputs of the audio-objects espacially of the busses. we produced
a serious feedback when converting TDM to core audio objects on my students song, because
logic chose some weird outputsettings and a bus was routed back to itself.
hope that does the trick
greetings wolfger

I have deleloped firefox npapi plugin which is working fine in some system and not loading in some system for firefox 4.

Npapi plugin developed for application was working absolutely fine for firefox version upto 3.6.
But in firefox 4.0 Its behavior is not consistent.
For some computer its working fine bt for some computer its not getting loaded in webpage.Here i have use <embed> tag to load plugin from webpage.
Thanx in advance

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.

MacPro2008 This system does not meet the minimum system requirements for graphics cards. FCP

Running FCPX 10.0.8 not possible because the graphic card
ATI Radeon HD 2600 doesn't support FCP.
Which affordable and compatible graphic card does support FinalCutPro 10.0.8?

Hello RenéG
Check out the first article for a list of video cards compatible with your Mac Pro Early 2008 model. I have also provided a link to a video card that is currently being sold on the Apple Store website that is compatible as well.
Mac Pro (all models): Graphics card compatibility between models
http://support.apple.com/kb/ht2848
NVIDIA Quadro 4000 for Mac
http://store.apple.com/us/product/H3314LL/A/nvidia-quadro-4000-for-mac?fnode=53
Regards,
-Norm G.

Solman_setup - Managed System Configuration - ST-PI plugin not up-to-date

Hi,
I have a problem with configuring managed systems in Solution manager using txn solman_setup. When I select the managed system, enter all the data for the READ destination, TMW destination and Back destination and click "Maintain Connection" the system comes back with message:
ST-PI Plugin not up-to-date for managed system IVE, see note 1274287
When I check the OSS note and my managed system I see that my managed system is already on the right required level for SAP Solution Tools Plug-In which is: ST-PI 2008_1_700.
I did check also for service packs but these do not yet exist.
Can someone help me with this issue?
Next list shows current version of the managed systems:
SAP ECC 6.0
SAP ABA 700 Sp 13
SAP Basis 700 SP13
St-PI 2008_1_700 SP 0
PI-Basis 2005_1_700 SP 13
SAP BW 700 SP 15
SAP AP 700 SP9
ST-A/PI 01l_ECC600 SP 0

I did finally resolve my problem with input from OS which is listed below.
You're using the latest version of ST-PI. There's no patch levels
available to download in this moment. To solve this issue I ask you to
first apply the latest version of this note below. Please, read
carefully step by step this note below and follow all the procedures.
Number 1172948
Short text SAP Solution Manager - Basic functions
After you applied the central note, I ask you to apply these notes belowWhen you had all these notes applied, this issue will be solved.
Number 1274287
Short text End-to-End Diagnostics SP18
Number 1244225
Short text Solution Manager 7.0 EhP 1: recommended
corrections
Please, apply the latest patch level for lmservice too.

In solution manager system not showing all the system in SLD

Dear Gurus,
During the installation of solution manger sysyem i selected as a Central SLD as solution manager
Later installed ECC 6.0 and EP systems selected SLD as solution manager system during the instllation.
If i login in to http://hostname:50000/sld (solution manger system) and the screen also not showing all the options also. some options missing in the tab. Wat I need to do to see all the options clearly.
It is not showing all the systems if i check in EP and ECC for SLDCHECK it is not givng any errror.
But if i login into solution manger not able to see all the system in SLD.
Regards

Thanks for reply
it is not showing all the systems

Managed System Configuration - Software version and OS is not accepting

Dear
When i try to setup the PI system in solman 7.1 - Managed system configuration, below the error msg.
Please help to sort it the problem
Regards
Jay

Hi Pany,
Steps to follow
- Rename the J2EEFRMW01_5-20002637.zip file to J2EEFRMW01_5-20002637.SCA.
-telnet localhost 5$$08
-logon with the user administrator
- deploy /software/j2eefrmwpatch/J2EEFRMW01_5-20002637.SCA version_rule=all
- Once it is done , then trigger the data to the SLD
- Checked the software component in SLD
- Resync the LMDB with SLD
- Then performed the activity of manage system Configuration.
With Regards
Ashutosh Chaturvedi

System service not activate in managed system

Similar Messages

Maybe you are looking for