Systemd has problems mounting efi

As you can see here [https://www.dropbox.com/s/2dzfssgnwtqs6 … .37.33.jpg] I'm having troubles booting from systemd because of the efi partition.
I don't get why it says that the fstype is wrong since vfat works well with sysvinit, anyone is able to help me get out of this?
Thanks!

Nope it was auto generated by genfstab...
Here is my fstab
# UUID=d7caefba-6d79-4ec2-a2fb-3d5957911b34
/dev/sda3 / ext4 rw,relatime,data=ordered 0 1
# UUID=7beb1ed3-370d-4435-b8ad-e408cfa844d7
/dev/sda4 /home ext4 rw,relatime,data=ordered 0 2
# UUID=1ed0f133-eb01-4f63-8c0a-962d53eb7476
/dev/sda2 /boot ext2 rw,relatime 0 2
# UUID=70D6-1701 LABEL=EFI
/dev/sda1 /boot/efi vfat rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
/swapfile none swap defaults 0 0
Last edited by ewaves (2012-10-09 09:13:53)

Similar Messages

[SOLVED] Systemd has problems with ntfs-3g

Hi!
I created a custom daemon.
It's very simple.
[Unit]
Description=Mounting partitions if Im at home
[Service]
Type=simple
ExecStart=/home/skitter/homemount.sh
[Install]
WantedBy=multi-user.target
And the content of a script:
#!/bin/bash
device0="/dev/disk/by-uuid/e2b0e86b-d377-4699-9407-48d56eb439d0"
if [ -b "$device0" ]
then
mount UUID=01CECC33AEE58980 /mnt/WINDOWS
mount UUID=ff2d44b5-bdd0-4524-89bf-6ac3bc005887 /mnt/Other
mount UUID=599D77CD384A8B00 /mnt/Files
fi
Unfortunately for some reason the ntfs partitions are being automatically unmounted.
The ext4 partition is not causing any problems.
$sudo systemctl status homemount
homemount.service - Mounting disk if Im at home
Loaded: loaded (/usr/lib/systemd/system/homemount.service; enabled)
Active: inactive (dead) since Sun 2013-10-27 21:56:23 CET; 1s ago
Process: 3202 ExecStart=/home/skitter/homemount.sh (code=exited, status=0/SUCCESS)
Main PID: 3202 (code=exited, status=0/SUCCESS)
Oct 27 21:56:22 archer ntfs-3g[3206]: Mounted /dev/sdb1 (Read-Write, label "", NTFS 3.1)
Oct 27 21:56:22 archer ntfs-3g[3206]: Cmdline options: rw
Oct 27 21:56:22 archer ntfs-3g[3206]: Mount options: rw,allow_other,nonempty,relatime,fsname=/dev/sdb1,blkdev,blksize=4096
Oct 27 21:56:22 archer ntfs-3g[3206]: Ownership and permissions disabled, configuration type 7
Oct 27 21:56:23 archer ntfs-3g[3213]: Version 2013.1.13 external FUSE 29
Oct 27 21:56:23 archer ntfs-3g[3213]: Mounted /dev/sda1 (Read-Write, label "Files", NTFS 3.1)
Oct 27 21:56:23 archer ntfs-3g[3213]: Cmdline options: rw
Oct 27 21:56:23 archer ntfs-3g[3213]: Mount options: rw,allow_other,nonempty,relatime,fsname=/dev/sda1,blkdev,blksize=4096
Oct 27 21:56:23 archer ntfs-3g[3213]: Ownership and permissions disabled, configuration type 7
Oct 27 21:56:23 archer ntfs-3g[3206]: Unmounting /dev/sdb1 ()
Last edited by Skitter (2013-10-27 21:43:32)

I think this is because the mount command exits, so the daemon is then considered dead (or completed). But I am not entirely sure about this.
A better solution would be to simply make an entry in your fstab with the noauto,x-systemd.automount,nofail options. This would essentially achieve what you are after I think. You could also make actualy systemd.mount and systemd.automount units as well, though these would automagically be generated by an entry in your fstab.
If you are unsure of what exactly to put in native systemd units, you can always see what systemd does in /run/systemd/generators. In fact, if you put a fstab entry for this ntfs-3g mount, let it generate (ie reboot, or run the generator) then check out that directory, you can simply pull those units out of there, give them an [Install] section, and enable them.

NFS4: Problem mounting NFS mount onto a Solaris 10 Client

Hi,
I am having problems mounting NFS mount point from a Linux-Server onto a Solaris 10 Client.
In the following
=My server IP ..*.120
=Client IP ..*.100
Commands run on Client:
==================
# mount -o vers=3 -F nfs 172.25.30.120:/scratch/pvfs2 /scratch/pvfs2
nfs mount: 172.25.30.120: : RPC: Rpcbind failure - RPC: Unable to receive
nfs mount: retrying: /scratch/pvfs2
nfs mount: 172.25.30.120: : RPC: Rpcbind failure - RPC: Unable to receive
nfs mount: 172.25.30.120: : RPC: Rpcbind failure - RPC: Unable to receive
# mount -o vers=4 -F nfs 172.25.30.120:/scratch/pvfs2 /scratch/pvfs2
nfs mount: 172.25.30.120:/scratch/pvfs2: No such file or directory
# rpcinfo -p
program vers proto port service
100000 4 tcp 111 rpcbind
100000 3 tcp 111 rpcbind
100000 2 tcp 111 rpcbind
100000 4 udp 111 rpcbind
100000 3 udp 111 rpcbind
100000 2 udp 111 rpcbind
1073741824 1 tcp 36084
100024 1 udp 42835 status
100024 1 tcp 36086 status
100133 1 udp 42835
100133 1 tcp 36086
100001 2 udp 42836 rstatd
100001 3 udp 42836 rstatd
100001 4 udp 42836 rstatd
100002 2 tcp 36087 rusersd
100002 3 tcp 36087 rusersd
100002 2 udp 42838 rusersd
100002 3 udp 42838 rusersd
100011 1 udp 42840 rquotad
100021 1 udp 4045 nlockmgr
100021 2 udp 4045 nlockmgr
100021 3 udp 4045 nlockmgr
100021 4 udp 4045 nlockmgr
100021 1 tcp 4045 nlockmgr
100021 2 tcp 4045 nlockmgr
100021 3 tcp 4045 nlockmgr
100021 4 tcp 4045 nlockmgr
# showmount -e 172.25.30.120 (Server)
showmount: 172.25.30.120: RPC: Rpcbind failure - RPC: Unable to receive
Commands OnServer:
================
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100021 1 tcp 49927 nlockmgr
100021 3 tcp 49927 nlockmgr
100021 4 tcp 49927 nlockmgr
100021 1 udp 32772 nlockmgr
100021 3 udp 32772 nlockmgr
100021 4 udp 32772 nlockmgr
100011 1 udp 796 rquotad
100011 2 udp 796 rquotad
100011 1 tcp 799 rquotad
100011 2 tcp 799 rquotad
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100005 1 udp 809 mountd
100005 1 tcp 812 mountd
100005 2 udp 809 mountd
100005 2 tcp 812 mountd
100005 3 udp 809 mountd
100005 3 tcp 812 mountd
100024 1 udp 854 status
100024 1 tcp 857 status
# showmount -e 172.25.30.120
Export list for 172.25.30.120:
/scratch/nfs 172.25.30.100,172.25.24.0/4
/scratch/pvfs2 172.25.30.100,172.25.24.0/4
Thank you, ~al

I also tried to run Snoop on the client and wireshark on Server and following is what I see:
One Server: Upon issuing mount command on client:
# tshark -i eth1
Running as user "root" and group "root". This could be dangerous.
Capturing on eth1
0.000000 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
0.205570 172.25.30.100 -> 172.25.30.120 Portmap V2 GETPORT Call MOUNT(100005) V:3 UDP
0.205586 172.25.30.120 -> 172.25.30.100 ICMP Destination unreachable (Port unreachable)
0.207863 172.25.30.100 -> 172.25.30.120 Portmap V2 GETPORT Call MOUNT(100005) V:3 UDP
0.207869 172.25.30.120 -> 172.25.30.100 ICMP Destination unreachable (Port unreachable)
2.005314 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
4.011005 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
5.206109 Dell_70:ad:29 -> SunMicro_70:ff:17 ARP Who has 172.25.30.100? Tell 172.25.30.120
5.206277 SunMicro_70:ff:17 -> Dell_70:ad:29 ARP 172.25.30.100 is at 00:14:4f:70:ff:17
5.216157 172.25.30.100 -> 172.25.30.120 Portmap V2 GETPORT Call MOUNT(100005) V:3 UDP
5.216170 172.25.30.120 -> 172.25.30.100 ICMP Destination unreachable (Port unreachable)
On Clinet Upon issuing mount command on client:
# snoop -d bge1
Using device /dev/bge1 (promiscuous mode)
? -> * ETHER Type=9000 (Loopback), size = 60 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
atlas-pvfs2 -> pvfs2-io-0-3 PORTMAP C GETPORT prog=100005 (MOUNT) vers=3 proto=UDP
pvfs2-io-0-3 -> atlas-pvfs2 ICMP Destination unreachable (UDP port 111 unreachable)
atlas-pvfs2 -> pvfs2-io-0-3 PORTMAP C GETPORT prog=100005 (MOUNT) vers=3 proto=UDP
pvfs2-io-0-3 -> atlas-pvfs2 ICMP Destination unreachable (UDP port 111 unreachable)
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> * ETHER Type=9000 (Loopback), size = 60 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
pvfs2-io-0-3 -> * ARP C Who is 172.25.30.100, atlas-pvfs2 ?
atlas-pvfs2 -> pvfs2-io-0-3 ARP R 172.25.30.100, atlas-pvfs2 is 0:14:4f:70:ff:17
atlas-pvfs2 -> pvfs2-io-0-3 PORTMAP C GETPORT prog=100005 (MOUNT) vers=3 proto=UDP
pvfs2-io-0-3 -> atlas-pvfs2 ICMP Destination unreachable (UDP port 111 unreachable)
Also I see the following on Client:
# rpcinfo -p pvfs2-io-0-3
rpcinfo: can't contact portmapper: RPC: Rpcbind failure - RPC: Failed (unspecified error)
When I try the above rpcinfo command on Client and Server Snoop And wireshark(ethereal) outputs are as follows:
Client # snoop -d bge1
Using device /dev/bge1 (promiscuous mode)
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
atlas-pvfs2 -> pvfs2-io-0-3 TCP D=111 S=872 Syn Seq=2065245538 Len=0 Win=49640 Options=<mss 1460,nop,wscale 0,nop,nop,sackOK>
pvfs2-io-0-3 -> atlas-pvfs2 ICMP Destination unreachable (TCP port 111 unreachable)
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> (multicast) ETHER Type=2004 (Unknown), size = 48 bytes
? -> (multicast) ETHER Type=0003 (LLC/802.3), size = 90 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> * ETHER Type=9000 (Loopback), size = 60 bytes
pvfs2-io-0-3 -> * ARP C Who is 172.25.30.100, atlas-pvfs2 ?
atlas-pvfs2 -> pvfs2-io-0-3 ARP R 172.25.30.100, atlas-pvfs2 is 0:14:4f:70:ff:17
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
atlas-pvfs2 -> pvfs2-io-0-3 TCP D=111 S=874 Syn Seq=2068043912 Len=0 Win=49640 Options=<mss 1460,nop,wscale 0,nop,nop,sackOK>
pvfs2-io-0-3 -> atlas-pvfs2 ICMP Destination unreachable (TCP port 111 unreachable)
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> * ETHER Type=9000 (Loopback), size = 60 bytes
Server # tshark -i eth1
Running as user "root" and group "root". This could be dangerous.
Capturing on eth1
0.000000 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
0.313739 Cisco_3d:68:10 -> CDP/VTP/DTP/PAgP/UDLD CDP Device ID: MILEVA Port ID: GigabitEthernet1/0/16
2.006422 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
3.483733 172.25.30.100 -> 172.25.30.120 TCP 865 > sunrpc [SYN] Seq=0 Win=49640 Len=0 MSS=1460 WS=0
3.483752 172.25.30.120 -> 172.25.30.100 ICMP Destination unreachable (Port unreachable)
4.009741 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
6.014524 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
6.551356 Cisco_3d:68:10 -> Cisco_3d:68:10 LOOP Reply
8.019386 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
8.484344 Dell_70:ad:29 -> SunMicro_70:ff:17 ARP Who has 172.25.30.100? Tell 172.25.30.120
8.484569 SunMicro_70:ff:17 -> Dell_70:ad:29 ARP 172.25.30.100 is at 00:14:4f:70:ff:17
10.024411 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
12.030956 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
12.901333 Cisco_3d:68:10 -> CDP/VTP/DTP/PAgP/UDLD DTP Dynamic Trunking Protocol
12.901421 Cisco_3d:68:10 -> CDP/VTP/DTP/PAgP/UDLD DTP Dynamic Trunking Protocol
^[[A 14.034193 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
15.691119 172.25.30.100 -> 172.25.30.120 TCP 866 > sunrpc [SYN] Seq=0 Win=49640 Len=0 MSS=1460 WS=0
15.691138 172.25.30.120 -> 172.25.30.100 ICMP Destination unreachable (Port unreachable)
16.038944 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
16.550760 Cisco_3d:68:10 -> Cisco_3d:68:10 LOOP Reply
18.043886 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
20.050243 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
21.487689 172.25.30.100 -> 172.25.30.120 TCP 867 > sunrpc [SYN] Seq=0 Win=49640 Len=0 MSS=1460 WS=0
21.487700 172.25.30.120 -> 172.25.30.100 ICMP Destination unreachable (Port unreachable)
22.053784 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
24.058680 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
26.063406 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
26.558307 Cisco_3d:68:10 -> Cisco_3d:68:10 LOOP Reply
~thank you for any help you can provide!!!

Backups failing with error 19: the backup disk could not be resolved, or there was a problem mounting it

Hello all,
Doubt this issue relates to a recent and ugly issue but sharing anyways (resolved thanks to a user here: LaPastenague)
Time Capsule won't backup if Modem (Motorola SB6121) attached
This was on Feb 10th resolved. Few days later I upgraded to Yosemite. Backups were working fine since.
Yesterday I happen to notice my last backup was 5 days ago. I looked in the console logs and saw:
2/25/15 3:55:06.127 PM com.apple.backupd[2777]: Attempting to mount network destination URL: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.778 PM com.apple.backupd[2777]: NAConnectToServerSync failed with error: 2 (No such file or directory) for url: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.792 PM com.apple.backupd[2777]: Backup failed with error 19: The backup disk could not be resolved, or there was a problem mounting it.
2/25/15 3:57:18.808 PM com.apple.prefs.backup.remoteservice[2021]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
I called Apple. Their front line was clueless. He suggested resetting the TC (latest "tower" model btw") which then a backup kicked off YEAH
But the next hour it failed
Called Apple again, this time to Sr Advisor. He suggested factory reset of the TC and set up again. Also first backup worked then rest failed
Third call to Apple useless also. He was asking questions I didn't feel relevant. He also was asking me to reset the TC which I told him was done 2 hours prior. He asked me to reboot which I could NOT at that time.
I begged him to collect data to submit to engineering, which will take days to get a reply.
So I thought I would throw this out to the community....
TC Is NEW (replaced from last issue). Mac is 8 months old (iMac 27"), Os is Yosemite, TC also new (latest model)
Thanks...

Yosemite is problematic on two fronts.. Networking and Time Machine.. so the combo of doing both with a Time Capsule is like bugs on bugs.
Here is my standard list.. but your problem maybe difficult to resolve.. and my suggestion is simple.. until Apple get their act together and fix TM.. buy Carbon Copy Cloner and use that for your backup. It is solid and reliable.. even better if you use USB drive plugged into the computer and do a bootable clone.. because then you have a backup that is able to be tested for full functionality 2min after the end of the backup.
This also starts from a factory reset.. but the reason for it is to change the configuration which is much more easily handled with factory reset to begin.. the instructions are there.. because this is my standard reply.. this is not uncommon!!
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the Mac itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. What I list here is good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

Firewire Problems : Mounting iPod Using External HD - iBook G4?

I cannot get my iPod to mount on the iBook's desktop. iBook is a 1.33Ghz G4.
I have a 1st generation iPod and bought an external Seagate HD (160GB) and a drive enclosure (the latter included an external powerblock, I can post the make/model if needed). I bought the HD in with the intention of storing my iTunes music library.
I've never had a problem mounting the iPod on the iBook via the Firewire port. Using the external HD is a different story. Because the iBook has only a single Firewire port, I connect the external HD to the iBook's Firewire Port and then connect the iPod to the Firewire port on the back of the external HD. When in this configuration, the iPod fails to mount on the desktop.
I've done a temporary, barebones workaround by copying a few critical music files onto my iBook's HD iTune library and then just downloading those few files to the iPod. But this is a huge PITA. My iPod is pretty much crippled if I cannot load the music files I need on it. I'm frozen out of my music library. My iPod only is only 5gig capacity & will not store my entire music library, so I need to have the flexibility to load the music I want, when I want.
Can any one advise what, if anything can be done to get the iPod to mount while connected to the external HD?
Thanks a bunch for any assistance.

Anyone?

My switch Linksys srw224g4 has problem and I need someone help

Hello,
My switch Linksys srw224g4 has problem that it keeps rebooting continuously and cannot bootup successfuly. Can someone tell me how to fix this problem? Firmware version is 1.2.2b , boot version is 1.0.2
Here is console capture:
==================
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.2 Built 17-Aug-2006 14:55:46
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
Decompressing SW from flash
100%
OK
Running from RAM...
*** Running SW Ver. 1.2.2b Date 20-Mar-2007 Time 11:44:49 ***
HW version is 00.03.00
Base Mac address is: 00:1d:7e:74:b6:14
Dram size is : 32M bytes
Dram first block size is : 16969K bytes
Dram first PTR is : 0xF6D840
Flash size is: 8M
01-Jan-2000 01:01:02 %CDB-I-LOADCONFIG: Loading startup configuration.
LZMA: Decompressing file failed!
HOSTG_rscode_file_load: could not load file
Device configuration:
Slot 1 - SRW24F4G HW Rev. 0.2
Tapi Version: v1.3.3.1
Core Version: v1.3.3.1
01-Jan-2000 01:01:09 %SYSLOG-F-OSFATAL:
L FATAL ERROR: ROOT: ABORT DATA exception
***** FATAL ERROR *****
SW Version : 1.2.2.16
Version Date: 20-Mar-2007
Version Time: 11:44:49
Instruction 0x121fc0
Exception vector 0x10
Program state register 0x20000013
***************** SYSTEM RESET *****************
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.2 Built 17-Aug-2006 14:55:46
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
Decompressing SW from flash
100%
OK
Running from RAM...
*** Running SW Ver. 1.2.2b Date 20-Mar-2007 Time 11:44:49 ***
HW version is 00.03.00
Base Mac address is: 00:1d:7e:74:b6:14
Dram size is : 32M bytes
Dram first block size is : 16969K bytes
Dram first PTR is : 0xF6D840
Flash size is: 8M
01-Jan-2000 01:01:02 %CDB-I-LOADCONFIG: Loading startup configuration.
LZMA: Decompressing file failed!
HOSTG_rscode_file_load: could not load file
DelScr fatal Error: Invalid Variant type01-Jan-2000 01:01:03 %SYSLOG-F-OSFATAL: DelScr fatal Error
***** FATAL ERROR *****
Reporting Task: ROOT.
Software Version: 1.2.2b (date 20-Mar-2007 time 11:44:49)
***************** SYSTEM RESET *****************
Thanks,
Tien

Hi,
Please follow the steps in this link to reload the image:
http://www.cisco.com/en/US/products/ps9967/products_qanda_item09186a0080a36371.shtml
And this is the link to download boot code 1.00.86:
http://ip.gliebetronics.com:800/firmware/Linksys%20SRW2024/Firmware/
Hope this help.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

Hello SamSax
Check out the assist page below for troubleshooting call connectivity.
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Tp ended with error code 0247 - addtobuffer has problems with data- and/or

Hello Experts,
If you give some idea, it will be greatly appreciated.
This transported issue started coming after power outage, sap system went hard shutdown.
Then we brought up the system. Before that , we do not have this transport issue.
our TMS landscape is
DEV QA-PRD
SED-SEQSEP
DEV is having the TMS domain controller.
FYI:
*At OS level, when we do scp command using root user, it is fine for any TR.
In STMS, while adding TR in SEQ(QA system), we are getting error like this.
Error:
Transport control program tp ended with error code 0247
     Message no. XT200
Diagnosis
     An error occurred when executing a tp command.
       Command:        ADDTOBUFFER SEDK906339 SEQ client010 pf=/us
       Return code:    0247
       Error text:     addtobuffer has problems with data- and/or
       Request:        SEDK906339
System Response
     The function terminates.
Procedure
     Correct the error and execute the command again if necessary.
This is tp version 372.04.71 (release 700, unicode enabled)
Addtobuffer failed for SEDK906339.
Neither datafile nor cofile exist (cofile may also be corrupted).
standard output from tp and from tools called by tp:
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0247

when we do scp using sm69,
SEDADM@DEVSYS:/usr/sap/trans/cofiles/K906339.SED SEQADM@QASYS:/usr/sap/trans/cofiles/.
it throws the error like below,
Host key verification failed.
                                                                                External program terminated with exit code 1
Thanks
Praba

My imac has problem with HP Photosmart 210a.

Hello
I have an I MAc with lion. And i Buyed an HP Photosmart 210a but the software on the CD id not completly with lion only with snow leopard.
Since this time i put the CD in the MAc my mac has Problems When i Startet Itunes he is running slowly and made e e e e e e e e.
The Software updater on mac show me every time the same Printer Software Update is For Update Ready, But every time he say it is finisched update but when i make a new search for updates he show me the same update is avaible for install.
When i Close down the mac and start new is the same problem.
You know the problem?
regreads
Markus

I've got the same problem on my MacBook Pro with Snow Leopard and Gutenprint 5.2.5 when printing on the 7150 - it prints about 10% (and skewed at that) and spits out the page. This occurs when printing from any app.
I am only able to print in draft mode which is not suitable for anything I need to do.
I realize this printer is no longer officially supported, but any help would be appreciated!
Thanks,
Mike.

Firefox does not load long images, pixelates images if they are not in their original size, and has problems with thumbnails (in some sites)

Firefox has problems with images.
In sites like deviantART or ImageShack with full-view option, images that are not in full size/thumbnails get slightly pixelated e.g. http://img251.imageshack.us/f/screenshot2tq.jpg/
Long images get completely messed up if full-viewed e.g. http://img689.imageshack.us/f/screenshot5z.jpg/ (though if the file is only big, it loads just fine)
Also, thumbnails in some sites get messed up e.g. http://img201.imageshack.us/f/screenshotyr.jpg/
And in general, Firefox has more 'glitches' like not allowing to add more search engines. It wasn't like that before and I can only assume that it got messed up somewhere with updates, but I'm not really sure.
I've tried cleaning out cache, re-installing Firefox (multiple times) and even downloaded Firefox 4 beta, but the problem remains.
I use Ubuntu.
Does anyone else have similar problems? Or know where the problem lies?

Do you have the latest driver for your graphics display card?
Create a new profile as a test to check if your current profile is causing the problems.
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Query has problem

Below query has problem .
Pls see the queries for Usage Summary with Partition and Without Partition
. I have executed this now so it may be in Buffer …****
DB Query ... SUM from event objects, bin variables
SELECT sum(amount) , sum(quantity), event.poid_type,ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,ebal.
rate_obj_id0, ebal.OFFERING_OBJ_ID0, ebal.IMPACT_CATEGORY ****
FROM event_bal_impacts_t ebal, item_t item, event_tevent*
WHERE event.item_obj_id0 = item.poid_id0****
AND ebal.obj_id0 = event.poid_id0****
--                   and event.Poid_id0 >= 266838277921701888****
--                 and event.Poid_id0 < 267928993456455680****
--               and ebal.obj_id0 >= 266838277921701888****
--             and ebal.obj_id0 < 267928993456455680****
AND item.bill_obj_id0 = 148715294****
AND ebal.product_obj_id0 = 27433706****
AND ebal.account_obj_id0 = 146876519****
AND item.account_obj_id0 = 146876519****
AND event.poid_type like '%session/telco/gsm%'****
AND ebal.impact_category <> 'Free'****
AND resource_id not in (select resource_id from
resource_id_t)****
group by****
event.poid_type, ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,****
ebal.rate_obj_id0, ebal.OFFERING_OBJ_ID0,ebal.
IMPACT_CATEGORY****
order by****
ebal.resource_id desc;****
SELECT sum(amount) , sum(quantity), event.poid_type,ebal.
resource_id,****
event.service_obj_type, event.service_obj_id0,ebal.
rate_obj_id0, ebal.OFFERING_OBJ_ID0, ebal.IMPACT_CATEGORY ****
FROM event_bal_impacts_t ebal, item_t item, event_tevent*
WHERE event.item_obj_id0 = item.poid_id0****
AND ebal.obj_id0 = event.poid_id0****
and event.Poid_id0 >= 264199450015039488****
and event.Poid_id0 < 265237388991660032****
and ebal.obj_id0 >= 264199450015039488****
and ebal.obj_id0 < 265237388991660032****
AND item.bill_obj_id0 = 148715294****
AND ebal.product_obj_id0 = 27433706****
AND ebal.account_obj_id0 = 146876519****
AND item.account_obj_id0 = 146876519****
AND event.poid_type like '%session/telco/gsm%'****
AND ebal.impact_category <> 'Free'****
AND resource_id not in (select resource_id from
resource_id_t)****
group by****
event.poid_type, ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,****
ebal.rate_obj_id0, ebal.OFFERING_OBJ_ID0,ebal.
IMPACT_CATEGORY****
order by****
ebal.resource_id desc;****
--

848478 wrote:
Below query has problem .
Pls see the queries for Usage Summary with Partition and Without Partition
. I have executed this now so it may be in Buffer …****
DB Query ... SUM from event objects, bin variables
SELECT sum(amount) , sum(quantity), event.poid_type,ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,ebal.
rate_obj_id0, ebal.OFFERING_OBJ_ID0, ebal.IMPACT_CATEGORY ****
FROM event_bal_impacts_t ebal, item_t item, event_tevent*
WHERE event.item_obj_id0 = item.poid_id0****
AND ebal.obj_id0 = event.poid_id0****
--                   and event.Poid_id0 >= 266838277921701888****
--                 and event.Poid_id0 < 267928993456455680****
--               and ebal.obj_id0 >= 266838277921701888****
--             and ebal.obj_id0 < 267928993456455680****
AND item.bill_obj_id0 = 148715294****
AND ebal.product_obj_id0 = 27433706****
AND ebal.account_obj_id0 = 146876519****
AND item.account_obj_id0 = 146876519****
AND event.poid_type like '%session/telco/gsm%'****
AND ebal.impact_category <> 'Free'****
AND resource_id not in (select resource_id from
resource_id_t)****
group by****
event.poid_type, ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,****
ebal.rate_obj_id0, ebal.OFFERING_OBJ_ID0,ebal.
IMPACT_CATEGORY****
order by****
ebal.resource_id desc;****
SELECT sum(amount) , sum(quantity), event.poid_type,ebal.
resource_id,****
event.service_obj_type, event.service_obj_id0,ebal.
rate_obj_id0, ebal.OFFERING_OBJ_ID0, ebal.IMPACT_CATEGORY ****
FROM event_bal_impacts_t ebal, item_t item, event_tevent*
WHERE event.item_obj_id0 = item.poid_id0****
AND ebal.obj_id0 = event.poid_id0****
and event.Poid_id0 >= 264199450015039488****
and event.Poid_id0 < 265237388991660032****
and ebal.obj_id0 >= 264199450015039488****
and ebal.obj_id0 < 265237388991660032****
AND item.bill_obj_id0 = 148715294****
AND ebal.product_obj_id0 = 27433706****
AND ebal.account_obj_id0 = 146876519****
AND item.account_obj_id0 = 146876519****
AND event.poid_type like '%session/telco/gsm%'****
AND ebal.impact_category <> 'Free'****
AND resource_id not in (select resource_id from
resource_id_t)****
group by****
event.poid_type, ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,****
ebal.rate_obj_id0, ebal.OFFERING_OBJ_ID0,ebal.
IMPACT_CATEGORY****
order by****
ebal.resource_id desc;****
--Consider getting the asterisk key fixed, since it results in invalid SQL syntax

Get error message that skype has problem loading when computer is turned on the first time every day. this started when the latest firefox v6.0 was downloaded.

get error message that skype has problem loading when computer is turned on the first time every day. this started when the latest firefox v6.0 was downloaded.

''mbratlie [[#question-1055011|said]]''
<blockquote>
It was working fine and I had no problems, and then one day I tried opening a window and it froze. When I tried quiting the program my whole window went black. The x to the close the window doesn't work. The only option I have in my tool bar is Firefox and nothing happens when I try to quit firefox. Every time I try to shut down my computer Firefox prevents it. I haven't updated Firefox yet, so it's an older program, but only by a month or two. What's going on and how do I fix it?
</blockquote>
This is the first time it's ever happened. I downloaded the new operating system for Firefox but I can't install it until the Firefox currently running on my laptop quits, which it won't.

When trying to uninstall iTune (because the current install has problems), I get the error message 2324. What should I do to reinstall the application?

When trying to uninstall iTune (because the current install has problems; iTune error message states it cannot sync and that I should reinstall the application; also, it fails when I tried to upgrade to the latest release), I get the error message 2324. What should I do to reinstall the application?

That installer error is a "Can't open file" error
It suggest that you may have a corrupt file.
Try running a disk check
http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors
If it fixes errors try uninstalling iTunes again.
If that doesn't work, is it possible for find out the name of the problem file, is further information available? Try looking in your Action center - that's on the control panel. Another place is in the Windows Error logs. From the start menu , right click on "Computer" and select manage, then Event viewer.
If nothing emerges, try a manual uninstall of iTunes and related programs according to this method:
http://support.apple.com/kb/HT1923
Don't worry if an uninstall fails, that is expected. Go on to the part where you have to delete files (2. Verify iTunes etc completely deleted) . Hopefully you manage to find a file that can't be deleted, that is the one we will need to deal with.

Pdf reader X has problems with small pdf and printer with post script driver

Hi friends.
I have installed new Reader X and then i saw that, when i print a very small pdf with about 50 kb and i print it on a Laserjet 4000 printer the printer has problem with the amount of data that reader 10 produces.
When i install a Postscript driver for the printer my computer makes up to 3.5MB printer data from a 50kb pdf.
When i install a PCL driver for the printer my computer makes only 350kb from the same 50kb pdf file!!!!
When i install Reader 9.3 the 50kb file becomes also only 350kb on the printer with post script driver, and i can print without problems also.
my printer has 8 MB Ram and that should be enough for 3.5MB printer data.
But when i print the pdf with 1 side only, the printer created a side who is only filled with 50% of the text, then there comes out a second page with the message.....not enough memory in the printer.
i can not change the postscript driver to a pcl driver cause our ERP System can not handle printer with PCL drivers.
Can someone help me please.........are there settings in Reader X who can solve my problem ???
Thank you very much for help!

put ? after rwcgi60.exe

Macbook sometimes has problems connecting

The brief summary is that my Macbook (white, core duo) has problems connecting to my G network when it has been on sleep mode. A restart usually fixes the issue until the computer goes to sleep again.
The G network is comprised of a Linksys WRT54GS that connects using WDS to the AirPort Express (G model). This network is used for any devices that use B/G and to share a printer. I use MAC address filtering (the lists are updated on both the AirPort Express and the Linksys routers), and security is WEP 128 (Because I could never get WPA or WPA2 to work with WDS...)
Here is what I've done to try to remedy the situation:
* Tried to remove the wireless security, and just let the MAC filtering work. This had no effect.
* Tried to remove the MAC filtering, and just let the wireless security work. This also had no effect.
* Tried to unplug the AirPort Express. _This worked, and allows the Macbook to connect everytime._
This leaves me somewhat puzzled; why would restarting the macbook allow it to connect? (this would imply the problem is with the airport express, not the macbook?), Is it more likely that it's the AirPort Express device itself or a problem with the WDS linking? (Airport Utility shows everything is fine). I use manually-assigned IPs, but could it be a problem with IP lease times?
While most computers use the Airport extreme N network (which is wired to the linksys router), all iPod touchs (5 of them), iPhones, and two PCs use the same G network and have never exhibited the same problem. I have reformatted the white macbook, deleted any airport preference files, etc., to no avail.
Any help or insight is greatly appreciated. Thanks,
Dave.
Message was edited by: Dave Luebbert

Dave,
Check some settings on your Macbook as follows:
Open System Preferences and click on Network so that your connections are displayed on the left of the pane.
Click the small gear shaped icon at the bottom of the connection list area
Select Set Service Order and make sure your Airport connection is at the top of the list so that it will be first in line for a connection. (If ethernet is set first now, your computer is spending time trying to find an ethernet connection before it looks for an Airport connection).
Now click on your Airport connection on the left to highlight it and click Advanced at the lower right of the pane.
Make sure that your network is at the top of the list of wireless networks so your computer won't spend time looking for other wireless networks first.
Delete any networks that you no longer need.
Make sure there is a check mark next to "Remember any networks this computer has joined"
Leave the next two boxes unchecked.
Any help?

Systemd has problems mounting efi

Similar Messages

Maybe you are looking for