Systemd + pulseaudio
Several months ago I installed pulseaudio and it worked fine at first glance.
Then I discovered that when there multiple users active, sound is only available to first user who captured soundcard:).
After I read www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/PerfectSetup and removed users from 'audio' group, all users got their sound.
But yesterday i decided to try systemd. And now I have sound only at the first terminal! When I'm switching to another terminal with Alt+Fn or launch X there is no sound till I switch back to first terminal.
If I add users to 'audio' group back it works for first user(as before systemd and removing users from 'audio').
Any suggestions or am I missed something? What am I doing wrong(except my bad english:p)?
Probably something to do with polkit/ck (can't remember which one pulse uses). Firstly, don't use the 'audio' group, next, you need to debug consolekit or polkit. I believe pulse is meant to be used with polkit (along with systemd) but due to old dependencies and some people not wanting to switch over we haven't been able to update polkit yet.
Similar Messages
-
Booting problems with systemd, lvm, linux-ck-corex
Hi everyone,
since Friday I got some complications while booting my system.
I use systemd, pulseaudio, bluez, network-manger, gnome and gdm as login manager.
Every partition (root, home) without the boot and crypted swap partition is within a lvm volume group.
Xserver with gdm starts but the login mask does not appear. (only the background, mousepointer, topbar with clock, energy etc. are shown)
Switching to the getty2 works, but after typing username and password, nothing happens.
Only some messages from systemd are poping up, saying it couldn't mount my home partition (timeout).
That explains why I couldn't login.
Shutting down the system via the powerkey works.
Starting via a system rescue disk, mounting everything (including my home partition) and chrooting works fine.
Journalctl shows that there are more problems.
The network-manager times out.
Gnome-shell with consolekit-daemon and Pulseaudio fails to communicate with bluez over the dbus.
Some version information of the listed packages:
% pacman -Qii pulseaudio systemd gnome-shell dbus networkmanager bluez consolekit
Name : pulseaudio
Version : 2.1-1
URL : http://www.freedesktop.org/wiki/Software/PulseAudio
Licenses : GPL LGPL
Groups : None
Provides : None
Depends On : libpulse=2.1-1 rtkit libltdl speex tdb udev fftw orc libsamplerate webrtc-audio-processing libsystemd
Optional Deps : avahi: zeroconf support
bluez: bluetooth support
gconf: configuration through gconf (paprefs)
jack: jack support
lirc-utils: infra-red support
openssl: RAOP support
python2-pyqt: Equalizer GUI (qpaeq)
Required By : gnome-settings-daemon paprefs pulseaudio-alsa
Conflicts With : None
Replaces : None
Installed Size : 5412.00 KiB
Packager : Jan Alexander Steffens (heftig) <[email protected]>
Architecture : x86_64
Build Date : Thu Jul 19 21:18:15 2012
Install Date : Fri Jul 20 12:02:20 2012
Install Reason : Explicitly installed
Install Script : Yes
Description : A featureful, general-purpose sound server
Backup Files:
UNMODIFIED /etc/pulse/daemon.conf
UNMODIFIED /etc/pulse/default.pa
UNMODIFIED /etc/pulse/system.pa
Name : systemd
Version : 188-2
URL : http://www.freedesktop.org/wiki/Software/systemd
Licenses : GPL2 LGPL2.1 MIT
Groups : None
Provides : None
Depends On : acl dbus-core libsystemd=188 kmod libcap pam systemd-tools=188 util-linux xz
Optional Deps : initscripts: legacy support for hostname and vconsole setup
initscripts-systemd: legacy generator for initialization scripts
python2-cairo: systemd-analyze
python2-dbus: systemd-analyze
systemd-arch-units: collection of native unit files for Arch daemon/init scripts
systemd-sysvcompat: symlink package to provide sysvinit binaries
Required By : systemd-arch-units
Conflicts With : None
Replaces : None
Installed Size : 4720.00 KiB
Packager : Dave Reisner <[email protected]>
Architecture : x86_64
Build Date : Sat Aug 11 01:17:44 2012
Install Date : Mon Aug 13 20:15:27 2012
Install Reason : Installed as a dependency for another package
Install Script : Yes
Description : system and service manager
Backup Files:
UNMODIFIED /etc/dbus-1/system.d/org.freedesktop.systemd1.conf
UNMODIFIED /etc/dbus-1/system.d/org.freedesktop.hostname1.conf
UNMODIFIED /etc/dbus-1/system.d/org.freedesktop.login1.conf
UNMODIFIED /etc/dbus-1/system.d/org.freedesktop.locale1.conf
UNMODIFIED /etc/dbus-1/system.d/org.freedesktop.timedate1.conf
UNMODIFIED /etc/systemd/system.conf
UNMODIFIED /etc/systemd/user.conf
UNMODIFIED /etc/systemd/logind.conf
UNMODIFIED /etc/systemd/journald.conf
Name : gnome-shell
Version : 3.4.2-1
URL : http://live.gnome.org/GnomeShell
Licenses : GPL2
Groups : gnome
Provides : None
Depends On : caribou folks gcr gjs gnome-bluetooth gnome-desktop gnome-menus libcroco libpulse mutter nautilus networkmanager telepathy-logger
telepathy-mission-control unzip
Optional Deps : network-manager-applet: shell integration for networkmanager
Required By : gnome-shell-extension-user-theme
Conflicts With : None
Replaces : None
Installed Size : 6064.00 KiB
Packager : Ionut Biru <[email protected]>
Architecture : x86_64
Build Date : Sat Jul 21 21:27:55 2012
Install Date : Sun Jul 22 20:51:39 2012
Install Reason : Explicitly installed
Install Script : Yes
Description : The next generation GNOME Shell
Backup Files:
(none)
Name : dbus
Version : 1.6.4-1
URL : http://www.freedesktop.org/Software/dbus
Licenses : GPL custom
Groups : None
Provides : None
Depends On : dbus-core>=1.6.4 libx11
Optional Deps : None
Required By : avahi qt rtkit xfconf
Conflicts With : None
Replaces : None
Installed Size : 68.00 KiB
Packager : Andreas Radke <[email protected]>
Architecture : x86_64
Build Date : Sat Jul 21 13:15:36 2012
Install Date : Sat Jul 21 14:30:09 2012
Install Reason : Installed as a dependency for another package
Install Script : No
Description : Freedesktop.org message bus system
Backup Files:
(none)
Name : networkmanager
Version : 0.9.4.0-6
URL : http://www.gnome.org/projects/NetworkManager/
Licenses : GPL
Groups : None
Provides : None
Depends On : dbus-glib iproute2 libnl nss polkit udev wpa_supplicant ppp dhcpcd libsoup
Optional Deps : modemmanager: for modem management service
dhclient: alternative DHCP/DHCPv6 client
iptables: Connection sharing
dnsmasq: Connection sharing
bluez: Bluetooth support
openresolv: openresolv support
Required By : cnetworkmanager empathy gnome-shell libsocialweb network-manager-applet networkmanager-dispatcher-netfs networkmanager-dispatcher-ntpd
networkmanager-dispatcher-openntpd networkmanager-openconnect networkmanager-openvpn networkmanager-pptp networkmanager-vpnc tracker
Conflicts With : None
Replaces : None
Installed Size : 5232.00 KiB
Packager : Jan Alexander Steffens (heftig) <[email protected]>
Architecture : x86_64
Build Date : Fri Jun 15 21:21:11 2012
Install Date : Sat Aug 11 10:07:19 2012
Install Reason : Explicitly installed
Install Script : Yes
Description : Network Management daemon
Backup Files:
MODIFIED /etc/NetworkManager/NetworkManager.conf
Name : bluez
Version : 4.101-1
URL : http://www.bluez.org/
Licenses : GPL2
Groups : None
Provides : bluez-libs bluez-utils
Depends On : dbus-core python2 systemd-tools
Optional Deps : gstreamer0.10-base: bluetooth GStreamer support
alsa-lib: Audio bluetooth devices support
dbus-python: to run bluez-simple-agent
pygobject: to run bluez-simple-agent
libusb-compat: USB adapters support
cups: CUPS backend
Required By : blueman gvfs-obexftp kismet obexd-client openobex pilot-link qemu-kvm
Conflicts With : bluez-libs bluez-utils
Replaces : bluez-libs bluez-utils
Installed Size : 3452.00 KiB
Packager : Tom Gundersen <[email protected]>
Architecture : x86_64
Build Date : Sat Jun 23 13:02:36 2012
Install Date : Sat Aug 11 11:01:04 2012
Install Reason : Explicitly installed
Install Script : No
Description : Libraries and tools for the Bluetooth protocol stack
Backup Files:
UNMODIFIED /etc/bluetooth/main.conf
UNMODIFIED /etc/bluetooth/rfcomm.conf
MODIFIED /etc/bluetooth/audio.conf
UNMODIFIED /etc/bluetooth/network.conf
UNMODIFIED /etc/bluetooth/input.conf
UNMODIFIED /etc/bluetooth/serial.conf
UNMODIFIED /etc/conf.d/bluetooth
UNMODIFIED /etc/dbus-1/system.d/bluetooth.conf
Name : consolekit
Version : 0.4.6-4
URL : http://www.freedesktop.org/wiki/Software/ConsoleKit
Licenses : GPL
Groups : None
Provides : None
Depends On : polkit zlib libx11 dbus-glib
Optional Deps : None
Required By : gdm gnome-session slim xfce4-session
Conflicts With : None
Replaces : None
Installed Size : 720.00 KiB
Packager : Dave Reisner <[email protected]>
Architecture : x86_64
Build Date : Sun May 27 06:29:53 2012
Install Date : Fri Jun 1 19:13:35 2012
Install Reason : Installed as a dependency for another package
Install Script : No
Description : A framework for defining and tracking users, login sessions, and seats
Backup Files:
(none)
And the version of all the other packages:
% pacman -Q
3to2-hg 1.0-1
a52dec 0.7.4-6
aalib 1.4rc5-9
abs 2.4.3-2
accountsservice 0.6.22-1
acl 2.2.51-2
acpi 1.6-1
acpid 2.0.16-3
acroread 9.5.1-2
acsccid 1.0.2-3
activity-log-manager 0.9.4-1
adns 1.4-3
adobe-air 2.1-1
adobe-air-sdk 2.6-2
aisleriot 3.2.2-1
akonadi 1.8.0-1
alfont 2.0.9-6
allegro 5.0.7-1
allegro4 4.4.2-2
alleyoop 0.9.8-2
alsa-firmware 1.0.25-2
alsa-lib 1.0.25-1
alsa-oss 1.0.25-1
alsa-plugins 1.0.25-2
alsa-utils 1.0.25-3
anjuta 3.4.4-1
antiword 0.37-3
apache 2.2.22-4
apache-ant 1.8.4-1
apg 2.2.3-3
apiextractor 0.10.10-1
apr 1.4.6-1
apr-util 1.4.1-1
aptana-studio 3.2.1-1
aqsis 1.8.1-1
archlinux-keyring 20120812-1
argyllcms 1.4.0-4
aria2 1.15.1-2
art-sharp 2.24.2-2
artwiz-fonts 1.3-7
aspell 0.60.6.1-1
aspell-de 20120607-1
aspell-en 7.1-2
at-spi 1.32.0-5
at-spi2-atk 2.4.0-1
at-spi2-core 2.4.2-1
atk 2.4.0-1
atkmm 2.22.6-1
attica 0.4.0-1
attr 2.4.46-2
audacity 2.0.1-2
aurvote 1.3-1
autoconf 2.69-1
autoconf2.13 2.13-2
autofs 5.0.6-3
autogen 5.15-1
automake 1.12.2-1
automoc4 0.9.88-3
autopano-sift-c 2.5.1-3
avahi 0.6.31-3
avidemux-cli 2.5.6-3
avidemux-gtk 2.5.6-3
avidemux-qt 2.5.6-3
avifile 0.7.45-8
babl 0.1.10-1
banshee 2.4.1-1
baobab 3.4.1-2
bash 4.2.037-1
bash-completion 2.0-2
bc 1.06-8
beep 1.3-2
bin32-flashplayer-standalone 11.2.202.236-2
bin32-google-earth 6.0.3.2197-1
binutils-multilib 2.22-8
bison 2.6.2-1
blas 3.4.1-1
bleachbit 0.9.3-1
blender 4:2.64-2
bluefish 2.2.3-1
blueman 1.23-4
bluez 4.101-1
bogofilter 1.2.2-4
boo 0.9.4.9-2
boost 1.50.0-2
boost-libs 1.50.0-2
brasero 3.4.1-1
brltty 4.3-5
bsdiff 4.3-7
bullet 2.80-1
bullet-docs 2.80-1
bzip2 1.0.6-4
bzr 2.5.1-1
c-ares 1.9.0-1
ca-certificates 20120623-1
ca-certificates-java 20120608-1
cabal-install 0.14.0-2
cabextract 1.4-2
cairo 1.12.2-2
cairo-perl 1.082-2
cairomm 1.10.0-2
calibre 0.8.64-1
cantarell-fonts 0.0.8-1
caribou 0.4.2-1
catdoc 0.94.3-1
ccid 1.4.7-1
cdparanoia 10.2-4
cdrdao 1.2.3-6
cdrkit 1.1.11-2
cfitsio 3.310-1
cheese 3.4.2-1
cherrytree 0.26-1
chmlib 0.40-3
chromium 21.0.1180.75-1
chromium-pepper-flash 11.3.31.307-1
chrpath 0.13-3
cifs-utils 5.6-2
cksfv 1.3.14-2
clamav 0.97.5-2
clang 3.1-4
clang-analyzer 3.1-4
claws-mail 3.8.1-1
claws-mail-extra-plugins 3.8.1-1
cloog 0.17.0-2
clutter 1.10.6-1
clutter-gst 1.6.0-1
clutter-gtk 1.2.0-1
cmake 2.8.9-1
cnetworkmanager 0.21.1-3
codeblocks 10.05-2
cogl 1.10.4-1
colord 0.1.21-2
compositeproto 0.4.2-2
consolekit 0.4.6-4
coolreader 3.0.56-1
coreutils 8.17-3
cpio 2.11-3
cpufrequtils 008-2
crack-attack 1.1.14-6
crack-attack-sounds 1.1.14-4
cracklib 2.8.18-2
crafty 23.4-2
crayonphysicsdeluxe 55_3-3
crda 1.1.2-3
cronie 1.4.8-3
cross-arm-elf-binutils 2.21-2
cross-arm-elf-gcc-base 4.6.0-1
cryptsetup 1.5.0-1
csfml 1.99.git20120504-1
ctags 5.8-3
cups 1.6.1-4
cups-filters 1.0.20-1
cups-pdf 2.6.1-1
cups-pk-helper 0.2.2-1
curl 7.27.0-1
curlftpfs 0.9.2-4
cvs 1.11.23-8
d-feet 0.1.14-2
damageproto 1.2.1-2
dash 0.5.7-2
dasher 4.10.1-3
db 5.3.21-1
dbus 1.6.4-1
dbus-core 1.6.4-1
dbus-glib 0.100-1
dbus-sharp 0.7.0-4
dbus-sharp-glib 0.5.0-4
dconf 0.12.1-2
deb2targz 0.1-3
deja-dup 22.1-1
desktop-file-utils 0.20-1
devede 3.22.0-2
devhelp 3.4.1-1
device-mapper 2.02.96-3
dfhack-git 20120613-1
dhclient 4.2.4.1-1
dhcp 4.2.4.1-1
dhcpcd 5.5.6-1
dia 0.97.2-3
dialog 1.1_20120706-1
diffstat 1.55-1
diffutils 3.2-1
dirmngr 1.1.0-4
django 1.4.1-1
django-classy-tags 0.3.4.1-1
django-cms 2.2-1
django-mptt 0.5.1-1
django-sekizai 0.5-1
djvulibre 3.5.24-3
dkms 2.2.0.3-11
dmxproto 2.3.1-2
dnsmasq 2.62-1
dnssec-anchors 20120422-1
dnsutils 9.9.1.P2-1
docbook-xml 4.5-5
docbook-xsl 1.77.1-2
dosbox 0.74-3
dosfstools 3.0.12-1
dotconf 1.3-3
doxygen 1.8.1.2-1
dri2proto 2.8-1
dropbox-experimental 1.5.10-1
duplicity 0.6.19-1
dvd+rw-tools 7.1-4
dvdauthor 0.7.0-4
dvgrab 3.5-4
dwarffortress 0.34.11-1
dwarffortress-ironhand 0.73-4
dwarftherapist-hg 571-1
e2fsprogs 1.42.4-1
easytag 2.1.7-2
eclipse 4.2-1
eclipse-cdt 8.1.0-2
eclipse-ecj 3.7.1-1
eclipse-mylyn 3.8.1-1
eclipse-pydev 2.6.0-1
eclipse-qt-eclipse-integration-bin 1.6.1-2
eclipse-subclipse 1.8.14-1
eigen2 2.0.17-1
eject 2.1.5-7
ekiga 3.3.2-6
elfutils 0.154-1
emacs 24.1-2
empathy 3.4.2.3-1
enblend-enfuse 4.0-6
enca 1.13-2
enchant 1.6.0-4
engine_pkcs11 0.1.8-2
enscript 1.6.5.2-2
eog 3.4.3-1
eog-plugins 3.4.1-1
epiphany 3.4.3-1
epydoc 3.0.1-2
eric 5.2.4-1
eric-plugins 5.1.0-1
eric4 4.5.5-1
eric4-plugins 4.4.4a-1
eventlog 0.2.12-3
evince 3.4.0-1
evolution 3.4.3-1
evolution-data-server 3.4.3-1
evolution-exchange 3.4.3-1
exempi 2.2.0-1
exiv2 0.23-1
exo 0.8.0-1
expac 1-1
expat 2.1.0-1
extundelete 0.2.0-2
faac 1.28-4
faad2 2.7-3
fakeroot 1.18.4-1
farstream 0.1.2-1
fb-client 1.0.4-1
fbreader 0.99.1-1
fcrackzip 1.0-3
festival 2.1-3
ffmpeg 1:0.11.1-1
ffmpeg-compat 20120509-1
fftw 3.3.2-1
file 5.11-1
file-roller 3.4.2-1
filesystem 2012.7-1
filezilla 3.5.3-1
findutils 4.4.2-4
firefox 14.0.1-1
firefox-i18n 14.0.1-1
firefox-i18n-de 14.0.1-1
firefox-nightly 17.0a1-1
fixesproto 5.0-2
flac 1.2.1-3
flasher 3.5_2.5.2.2-2
flashplugin 11.2.202.236-1
flex 2.5.37-1
fltk 1.3.0-3
fltk-docs 1.3.0-3
fltk-games 1.3.0-3
fluidsynth 1.1.5-2
folks 0.6.9-2
font-bh-ttf 1.0.1-2
font-bitstream-speedo 1.0.1-2
font-misc-ethiopic 1.0.1-2
font-misc-meltho 1.0.1-2
fontconfig 2.8.0-2
fontsproto 2.1.2-1
foomatic-db 1:4.0.17_20120712-1
foomatic-db-engine 1:4.0.17_20120712-1
foomatic-db-nonfree 1:4.0.17_20120712-1
foomatic-filters 1:4.0.17_20120712-1
fortune-mod 1.99.1-5
fortune-mod-chucknorris 1-3
fortune-mod-discworld 0-2
fortune-mod-ferengi_rules_of_acquisition 20080318-1
fortune-mod-futurama 0.2-4
fortune-mod-himym 0.3-3
fortune-mod-hitchhiker 20050611-1
fortune-mod-house 20100911-1
fortune-mod-matrix 20091124-1
fortune-mod-misfits 0.1-2
fortune-mod-montypython 20091124-1
fortune-mod-simpsons-chalkboard 0-2
fortune-mod-southpark 20100911-1
fortune-mod-tbbt 0.5-1
fortune-mod-the-godfather 3.0-2
fox 1.6.46-1
freeglut 2.8.0-1
freeimage 3.15.3-1
freemind 0.9.0-2
freenet 0.7.5-1
freetype2 2.4.10-1
frei0r-plugins 1.3-3
fretsonfire 1.3.110-7
fribidi 0.19.2-2
ftgl 2.1.3rc5-3
ftjam 2.5.3rc2-3
fuse 2.9.1-1
fuseiso 20070708-4
fwbuilder 5.1.0.3599-2
gadmin-samba 0.3.3-1
gambas3-devel 3.2.1-4
gambas3-examples 3.2.1-4
gambas3-gb-cairo 3.2.1-4
gambas3-gb-chart 3.2.1-4
gambas3-gb-compress 3.2.1-4
gambas3-gb-crypt 3.2.1-4
gambas3-gb-db 3.2.1-4
gambas3-gb-db-form 3.2.1-4
gambas3-gb-db-mysql 3.2.1-4
gambas3-gb-db-odbc 3.2.1-4
gambas3-gb-db-postgresql 3.2.1-4
gambas3-gb-db-sqlite2 3.2.1-4
gambas3-gb-db-sqlite3 3.2.1-4
gambas3-gb-dbus 3.2.1-4
gambas3-gb-desktop 3.2.1-4
gambas3-gb-eval-highlight 3.2.1-4
gambas3-gb-form 3.2.1-4
gambas3-gb-form-dialog 3.2.1-4
gambas3-gb-form-mdi 3.2.1-4
gambas3-gb-form-stock 3.2.1-4
gambas3-gb-gsl 3.2.1-4
gambas3-gb-gtk 3.2.1-4
gambas3-gb-image 3.2.1-4
gambas3-gb-image-effect 3.2.1-4
gambas3-gb-image-imlib 3.2.1-4
gambas3-gb-image-io 3.2.1-4
gambas3-gb-net 3.2.1-4
gambas3-gb-net-curl 3.2.1-4
gambas3-gb-net-smtp 3.2.1-4
gambas3-gb-opengl 3.2.1-4
gambas3-gb-opengl-glsl 3.2.1-4
gambas3-gb-opengl-glu 3.2.1-4
gambas3-gb-option 3.2.1-4
gambas3-gb-pcre 3.2.1-4
gambas3-gb-pdf 3.2.1-4
gambas3-gb-qt4 3.2.1-4
gambas3-gb-qt4-ext 3.2.1-4
gambas3-gb-qt4-opengl 3.2.1-4
gambas3-gb-qt4-webkit 3.2.1-4
gambas3-gb-report 3.2.1-4
gambas3-gb-sdl 3.2.1-4
gambas3-gb-sdl-sound 3.2.1-4
gambas3-gb-settings 3.2.1-4
gambas3-gb-signal 3.2.1-4
gambas3-gb-v4l 3.2.1-4
gambas3-gb-vb 3.2.1-4
gambas3-gb-web 3.2.1-4
gambas3-gb-xml 3.2.1-4
gambas3-gb-xml-rpc 3.2.1-4
gambas3-gb-xml-xslt 3.2.1-4
gambas3-ide 3.2.1-4
gambas3-runtime 3.2.1-4
gambas3-script 3.2.1-4
gamin 0.1.10-6
garcon 0.2.0-1
gavl 1.2.0-2
gawk 4.0.1-1
gc 7.2-1
gcalctool 6.4.2.1-1
gcc-fortran 4.7.1-5
gcc-libs-multilib 4.7.1-5
gcc-multilib 4.7.1-5
gcolor2 0.4-6
gconf 3.2.5-2
gconf-editor 3.0.0-2
gconf-sharp 2.24.2-2
gconf-sharp-peditors 2.24.2-2
gconfmm 2.28.3-1
gcr 3.4.1-1
gd 2.0.36RC1-5
gdal 1.9.0-1
gdata-sharp 1.7.0.1-2
gdb 7.4.1-1
gdbm 1.10-1
gdk-pixbuf2 2.26.1-1
gdl 3.4.2-1
gdm 3.4.1-2
gedit 3.4.2-1
gedit-plugins 3.4.0-2
geeqie 1.0-7
gegl 0.2.0-2
generatorrunner 0.6.16-1
geoclue 0.12.0-5
geoip 1.4.8-2
geoip-database 20120706-1
geos 3.3.4-1
gettext 0.18.1.1-4
gettext-mono 0.18.1.1-1
ghc 7.4.2-1
ghex 3.4.1-1
ghostscript 9.06-1
giflib 4.1.6-5
gimp 2.8.0-2
gimp-fourier 0.4.1-1
gimp-gap 2.6.0-3
gimp-paint-studio 1.5_final-1
gimp-plugin-dcamnoise2 0.64-6
gimp-plugin-dds 2.0.9-1
gimp-plugin-pandora 0.9.3-2
gimp-plugin-texturize 2.1-3
gimp-resynth 1:20120508-1
gimpfx-foundry 2.6_1-2
git 1.7.11.4-1
git-term 1.2.6-2
gjs 1.32.0-2
gkeyfile-sharp 0.1-2
gksu 2.0.2-4
glade 3.12.1-1
glew 1.8.0-1
glhack 1.2-6
glib-networking 2.32.3-1
glib-perl 1.260-1
glib2 2.32.4-1
glibc 2.16.0-2
glibmm 2.32.1-1
glpk 4.47-1
glproto 1.4.16-1
gmime 2.6.10-1
gmp 5.0.5-1
gnochm 0.9.11-11
gnome-activity-journal-bzr 1251-1
gnome-applets 3.4.1-1
gnome-backgrounds 3.4.2-1
gnome-bluetooth 3.4.2-1
gnome-color-manager 3.4.2-2
gnome-common 3.4.0.1-2
gnome-contacts 3.4.1-1
gnome-control-center 3.4.2-1
gnome-cups-manager 0.33-6
gnome-desktop 1:3.4.2-1
gnome-desktop2 2.32.1-2
gnome-dictionary 3.4.0-1
gnome-disk-utility 3.4.1-1
gnome-doc-utils 0.20.10-1
gnome-documents 0.4.2-1
gnome-font-viewer 3.4.0-1
gnome-games 3.4.2-1
gnome-games-extra-data 3.2.0-1
gnome-icon-theme 3.4.0-1
gnome-icon-theme-extras 3.4.0-1
gnome-icon-theme-symbolic 3.4.0-1
gnome-inform7 6G60-3
gnome-js-common 0.1.2-2
gnome-keyring 3.4.1-3
gnome-media 3.4.0-1
gnome-menus 3.4.2-1
gnome-mime-data 2.18.0-6
gnome-nettool 3.1.1-1
gnome-online-accounts 3.4.2-1
gnome-packagekit 3.4.2-1
gnome-panel 3.4.2.1-1
gnome-power-manager 3.4.0-1
gnome-print-sharp 2.26.0-7
gnome-python 2.28.1-8
gnome-python-extras 2.25.3-12
gnome-screensaver 3.4.4-1
gnome-screenshot 3.4.1-1
gnome-search-tool 3.4.0-1
gnome-session 3.4.2-3
gnome-settings-daemon 3.4.2-1
gnome-settings-daemon-updates 3.4.2-1
gnome-sharp 2.24.2-2
gnome-shell 3.4.2-1
gnome-shell-extension-user-theme 3.2.3-1
gnome-speech 0.4.25-2
gnome-system-log 3.4.1-1
gnome-system-monitor 3.4.1-1
gnome-terminal 3.4.1.1-1
gnome-themes-extras 2.22.0-3
gnome-themes-standard 3.4.2-1
gnome-tweak-tool 3.4.0.1-1
gnome-user-docs 3.4.2-1
gnome-utils 3.4.0-1
gnome-vfs 2.24.4-6
gnome-vfs-sharp 2.24.2-2
gnome-video-effects 0.4.0-1
gnonlin 0.10.16-2
gnuchess 6.0.2-1
gnunet 0.9.3-1
gnunet-gtk 0.9.3-1
gnupg 2.0.19-2
gnuplot 4.6.0-3
gnutls 3.0.22-1
gobject-introspection 1.32.1-2
goocanvas 2.0.1-2
goocanvas1 1.0.0-1
gourmet 0.15.9-2
gparted 0.13.1-1
gperf 3.0.4-4
gpgme 1.3.1-4
gphoto2 2.4.14-1
gpm 1.20.6-10
gprolog 1.4.0-2
gpsim 0.26.1-2
gputils 0.14.1-1
grantlee 0.2.0-1
graphicsmagick 1.3.16-1
graphite 1:1.0.3-1
graphviz 2.28.0-10
grep 2.13-2
groff 1.21-2
grsync 1.2.1-1
grub-bios 2.00-1
grub-common 2.00-1
gsettings-desktop-schemas 3.4.2-1
gsfonts 1.0.7pre44-3
gsl 1.15-2
gsm 1.0.13-7
gsmartcontrol 0.8.7-1
gssdp 0.12.1-1
gstreamer0.10 0.10.36-1
gstreamer0.10-bad 0.10.23-2
gstreamer0.10-bad-plugins 0.10.23-2
gstreamer0.10-base 0.10.36-1
gstreamer0.10-base-plugins 0.10.36-1
gstreamer0.10-ffmpeg 0.10.13-1
gstreamer0.10-good 0.10.31-1
gstreamer0.10-good-plugins 0.10.31-1
gstreamer0.10-python 0.10.22-1
gstreamer0.10-ugly 0.10.19-2
gstreamer0.10-ugly-plugins 0.10.19-2
gthumb 3.0.1-2
gtk-doc 1.18-1
gtk-engines 2.21.0-1
gtk-recordmydesktop 0.3.8-6
gtk-sharp-2 2.12.11-1
gtk-update-icon-cache 2.24.11-2
gtk-vnc 0.5.0-1
gtk2 2.24.11-2
gtk2+extra 2.1.2-2
gtk2-perl 1.244-1
gtk2-xfce-engine 3.0.0-1
gtk3 3.4.4-1
gtkglext 1.2.0-7
gtkglextmm 1.2.0-8
gtkhtml 3.32.2-3
gtkhtml-sharp 2.26.0-8
gtkhtml4 4.4.3-1
gtkmm 2.24.2-2
gtkmm3 3.4.0-1
gtksourceview2 2.10.5-2
gtksourceview2-sharp 2.26.0-8
gtksourceview3 3.4.2-1
gtkspell 2.0.16-2
gts 0.7.6-2
gucharmap 3.4.1.1-1
gudev-sharp 0.1-2
guile 1.8.8-2
gupnp 0.18.2-1
gupnp-av 0.10.2-1
gupnp-dlna 0.6.6-1
gutenprint 5.2.9-1
guvcview 1.6.0-2
gvfs 1.12.3-3
gvfs-gphoto2 1.12.3-3
gvfs-obexftp 1.12.3-3
gvfs-smb 1.12.3-3
gzip 1.5-1
hammerfight 1:1.004-1
handbrake 0.9.8-1
handbrake-cli 0.9.8-1
happy 1.18.9-5
haxe 2.10-1
hdf5 1.8.8-1
hdparm 9.39-1
heirloom-mailx 12.5-3
help2man 1.40.11-1
hibiscus 2.2.1-2
hicolor-icon-theme 0.12-2
hot-babe 0.2.2-11
hplip 3.12.6-3
hspell 1.1-2
hsqldb-java 1:1.8.0.10-2
httrack 3.46.1-1
hugin 2011.4.0-5
hunspell 1.3.2-1
hunspell-de 20120607-1
hunspell-en 7.1-2
hwids 20120730-1
hwloc 1.4.2-1
hydrogen 0.9.5-2
hyphen 2.8.5-1
i2p 0.9.1-1
iana-etc 2.30-3
iat 0.1.7-4
icedtea-web-java7 1.2.1-2
icon-naming-utils 0.8.90-2
icoutils 0.29.1-2
icu 49.1.2-2
id3lib 3.8.3-12
idnkit 1.0-2
ilmbase 1.0.2-1
imagemagick 6.7.8.9-1
imlib2 1.4.5-2
indent 2.2.11-2
inetutils 1.9.1-2
inform7 6G60-1
inkscape 0.48.3.1-4
inputproto 2.2-1
intel-tbb 4.0_20120613-1
intltool 0.50.2-1
iproute2 3.4.0-2
iptables 1.4.14-3
iputils 20101006-4
ipython 0.13-1
ipython2 0.13-1
isl 0.10-1
iso-codes 3.38-1
itstool 1.1.2-1
iw 3.4-1
jack 0.121.3-6
jade 1.2.1-8
jameica 2.2-3
jamestown 1.0.1-1
jasper 1.900.1-7
java-rhino 1.7R3-3
jdk7-openjdk 7.u5_2.2.1-1
jfsutils 1.1.15-3
john 1.7.9-6
jre7-openjdk 7.u5_2.2.1-1
jre7-openjdk-headless 7.u5_2.2.1-1
js 1.8.5-3
json-c 0.9-1
json-glib 0.14.2-1
jython 2.5.2-2
kactivities 4.9.0-1
kbd 1.15.3-3
kbproto 1.0.6-1
kdebase-runtime 4.9.0-3
kdelibs 4.9.0-4
kdelibs3 3.5.10-13
kdenlive 0.9.2-2
kdepimlibs 4.9.0-1
keyutils 1.5.5-3
khrplatform-devel 8.0.4-2
kismet 2011_03_R2-4
kmod 9-2
komodo-ide 7.0.2_70257-1
komodoedit 7.1.0_10496-1
krb5 1.10.3-1
ktechlab 0.3.7-3
ladspa 1.13-3
lame 3.99.5-1
lapack 3.4.1-1
laptop-mode-tools 1.61-2
latexila 2.4.0-6
lcms 1.19-2
lcms2 2.3-2
ld-lsb 3-4
ldns 1.6.13-1
leptonica 1.69-3
less 444-3
lesstif 0.95.2-4
lftp 4.3.8-1
lib32-acl 2.2.51-2
lib32-allegro 5.0.7-1
lib32-alsa-lib 1.0.25-1
lib32-alsa-plugins 1.0.25-1
lib32-atk 2.4.0-1
lib32-attr 2.4.46-2
lib32-bzip2 1.0.6-1
lib32-cairo 1.12.2-1
lib32-curl 7.26.0-1
lib32-dbus-core 1.6.4-1
lib32-e2fsprogs 1.42.4-1
lib32-expat 2.1.0-1
lib32-flac 1.2.1-8
lib32-fontconfig 2.8.0-4
lib32-freetype2 2.4.10-1
lib32-gcc-libs 4.7.1-5
lib32-gdk-pixbuf2 2.26.1-2
lib32-gettext 0.18.1.1-2
lib32-giflib 4.1.6-6
lib32-glew 1.8.0-1
lib32-glew1.5 1.5.8-1
lib32-glib2 2.32.4-1
lib32-glibc 2.16.0-2
lib32-gtk2 2.24.11-1
lib32-jack 0.121.3-1
lib32-json-c 0.9-2
lib32-keyutils 1.5.5-1
lib32-krb5 1.10.2-1
lib32-lcms 1.19-4
lib32-libasyncns 0.8-6
lib32-libcanberra 0.28-2
lib32-libcanberra-pulse 0.28-2
lib32-libcap 2.22-1
lib32-libcups 1.6.1-1
lib32-libdrm 2.4.37-1
lib32-libdrm-nouveau1 2.4.33-1
lib32-libffi 3.0.11-1
lib32-libgcrypt 1.5.0-1
lib32-libgl 8.0.4-4
lib32-libglade 2.6.4-5
lib32-libglapi 8.0.4-4
lib32-libgpg-error 1.10-1
lib32-libice 1.0.8-1
lib32-libjpeg-turbo 1.2.1-1
lib32-libjpeg6 6b1-1
lib32-libldap 2.4.32-1
lib32-libltdl 2.4.2-6
lib32-libmikmod 3.1.12-6
lib32-libmng 1.0.10-6
lib32-libogg 1.3.0-1
lib32-libpciaccess 0.13.1-1
lib32-libpng 1.5.12-1
lib32-libpng12 1.2.50-1
lib32-libpulse 2.1-1
lib32-libsm 1.2.1-1
lib32-libsndfile 1.0.25-2
lib32-libssh2 1.4.2-1
lib32-libtiff 4.0.2-1
lib32-libusb 1.0.9-1
lib32-libusb-compat 0.1.4-2
lib32-libvorbis 1.3.3-1
lib32-libx11 1.5.0-1
lib32-libxau 1.0.7-1
lib32-libxcb 1.8.1-2
lib32-libxcomposite 0.4.3-3
lib32-libxcursor 1.1.13-1
lib32-libxdamage 1.1.3-4
lib32-libxdmcp 1.1.1-1
lib32-libxext 1.3.1-1
lib32-libxfixes 5.0-1
lib32-libxft 2.3.1-1
lib32-libxi 1.6.1-1
lib32-libxinerama 1.1.2-1
lib32-libxml2 2.7.8-2
lib32-libxmu 1.1.1-1
lib32-libxpm 3.5.9-2
lib32-libxrandr 1.3.2-2
lib32-libxrender 0.9.7-1
lib32-libxss 1.2.2-1
lib32-libxt 1.1.3-1
lib32-libxtst 1.2.1-1
lib32-libxv 1.0.7-1
lib32-libxxf86dga 1.1.3-1
lib32-libxxf86vm 1.1.2-1
lib32-mesa 8.0.4-4
lib32-mpg123 1.14.4-1
lib32-ncurses 5.9-1
lib32-nouveau-dri 8.0.4-1
lib32-nspr 4.9.2-1
lib32-nss 3.13.5-1
lib32-openal 1.14-1
lib32-openssl 1.0.1.c-1
lib32-pango 1.30.1-1
lib32-pcre 8.31-1
lib32-physfs 2.0.2-2
lib32-pixman 0.26.2-1
lib32-qt 4.8.2-2
lib32-readline 6.2.004-1
lib32-sdl 1.2.15-2
lib32-sdl_image 1.2.12-2
lib32-sdl_mixer 1.2.11-3
lib32-sdl_ttf 2.0.11-1
lib32-smpeg 0.4.4-9
lib32-sqlite3 3.7.13-1
lib32-tdb 1.2.9-1
lib32-util-linux 2.21.2-1
lib32-v4l-utils 0.8.8-1
lib32-xcb-util 0.3.9-1
lib32-zlib 1.2.7-1
libanjuta 3.4.4-1
libao 1.1.0-2
libarchive 3.0.4-1
libart-lgpl 2.3.21-2
libass 0.10.0-3
libassuan 2.0.3-1
libasyncns 0.8-4
libatasmart 0.18-2
libavc1394 0.5.4-1
libbluray 0.2.2-1
libbonobo 2.32.1-2
libbonoboui 2.24.5-2
libcaca 0.99.beta18-1
libcanberra 0.28-5
libcanberra-gstreamer 0.28-5
libcanberra-pulse 0.28-5
libcap 2.22-3
libcap-ng 0.6.6-1
libcdaudio 0.99.12-6
libcddb 1.3.2-3
libcdio 0.83-1
libchamplain 0.12.3-1
libcroco 0.6.5-1
libcups 1.6.1-4
libdaemon 0.14-2
libdatrie 0.2.5-1
libdbusmenu-qt 0.9.2-1
libdc1394 2.1.3-2
libdca 0.0.5-3
libdiscid 0.2.2-2
libdmtx 0.7.4-3
libdmx 1.1.2-1
libdrm 2.4.37-1
libdrm-nouveau1 2.4.33-1
libdv 1.0.0-4
libdvbpsi 0.2.2-1
libdvdcss 1.2.12-1
libdvdnav 4.2.0-2
libdvdread 4.2.0-1
libebml 1.2.2-2
libedit 20120311_3.0-1
libegl 8.0.4-2
libetpan 1.0-4
libevent 2.0.19-1
libexif 0.6.21-1
libextractor 0.6.3-6
libffi 3.0.11-1
libfontenc 1.1.1-1
libftdi 0.20-1
libgcrypt 1.5.0-3
libgda 5.0.3-1
libgdata 0.12.0-1
libgdiplus 2.10-2
libgee 0.6.5-1
libgeotiff 1.3.0-2
libgexiv2 0.4.1-3
libgksu 2.0.12-5
libgl 8.0.4-2
libglade 2.6.4-3
libglademm 2.6.7-2
libglapi 8.0.4-2
libgme 0.6.0-2
libgnome 2.32.1-3
libgnome-data 2.32.1-3
libgnome-desktop-sharp 2.26.0-8
libgnome-keyring 3.4.1-1
libgnome-media-profiles 3.0.0-3
libgnome-sharp 2.24.2-2
libgnomecanvas 2.30.3-2
libgnomecups 0.2.3-11
libgnomekbd 3.4.0.2-1
libgnomeprint 2.18.8-5
libgnomeprintui 2.18.6-4
libgnomeui 2.24.5-1
libgpg-error 1.10-2
libgphoto2 2.4.14-1
libgpod 0.8.2-6
libgsf 1.14.23-1
libgssglue 0.3-1
libgtkhtml 2.11.1-4
libgtop 2.28.4-1
libgusb 0.1.3-1
libgweather 3.4.1-1
libgxps 0.2.2-1
libical 0.48-1
libice 1.0.8-1
libid3tag 0.15.1b-7
libidl2 0.8.14-2
libidn 1.25-1
libiec61883 1.2.0-3
libieee1284 0.2.11-4
libimobiledevice 1.1.4-2
libiodbc 3.52.8-1
libircclient 1.6-1
libirman 0.4.5-3
libjpeg-turbo 1.2.1-1
libjpeg6-turbo 1.2.1-1
libkate 0.4.1-3
libksba 1.2.0-2
libldap 2.4.32-1
liblinebreak 2.1-1
liblouis 2.3.0-1
liblqr 0.4.1-3
liblrdf 0.5.0-1
libltdl 2.4.2-6
libmad 0.15.1b-6
libmatroska 1.3.0-2
libmicrohttpd 0.9.21-1
libmikmod 3.1.12-4
libmirage 1.5.0-1
libmms 0.6.2-1
libmng 1.0.10-4
libmodplug 0.8.8.4-1
libmp4v2 2.0.0-2
libmpc 0.9-2
libmpcdec 1.2.6-3
libmpeg2 0.5.1-3
libmtp 1.1.3-1
libmusicbrainz3 3.0.3-2
libmusicbrainz4 4.0.3-1
libmysqlclient 5.5.27-1
libmythes 1:1.2.3-1
libnice 0.1.2-1
libnl 3.2.11-1
libnl1 1.1-1
libnotify 0.7.5-1
liboauth 0.9.6-1
libofa 0.9.3-4
libogg 1.3.0-1
libotf 0.9.12-2
libotr 3.2.0-3
libp11 0.2.8-1
libpano13 2.9.18-2
libpcap 1.3.0-1
libpciaccess 0.13.1-1
libpeas 1.4.0-2
libpipeline 1.2.1-1
libplist 1.8-2
libpng 1.5.12-1
libpng12 1.2.50-1
libpng14 1.4.11-1
libproxy 0.4.7-2
libpst 0.6.54-2
libpulse 2.1-1
libpurple 2.10.6-1
libquvi 0.4.1-1
libquvi-scripts 0.4.6-1
libqzeitgeist 0.8.0-2
libraw 0.14.6-1
libraw1394 2.0.7-2
libreoffice-base 3.5.5-1
libreoffice-calc 3.5.5-1
libreoffice-common 3.5.5-1
libreoffice-de 3.5.5-1
libreoffice-draw 3.5.5-1
libreoffice-extension-ct2n 3.4.5-2
libreoffice-extension-diagram 3.4.5-2
libreoffice-extension-google-docs 3.4.5-2
libreoffice-extension-hunart 3.4.5-2
libreoffice-extension-nlpsolver 3.5.5-1
libreoffice-extension-numbertext 3.4.5-2
libreoffice-extension-oooblogger 3.4.5-2
libreoffice-extension-pdfimport 3.5.5-1
libreoffice-extension-presentation-minimizer 3.5.5-1
libreoffice-extension-presenter-screen 3.5.5-1
libreoffice-extension-report-builder 3.5.5-1
libreoffice-extension-scripting-beanshell 3.4.5-2
libreoffice-extension-scripting-javascript 3.4.5-2
libreoffice-extension-scripting-python 3.5.5-1
libreoffice-extension-typo 3.4.5-2
libreoffice-extension-validator 3.4.5-2
libreoffice-extension-watch-window 3.4.5-2
libreoffice-extension-wiki-publisher 3.5.5-1
libreoffice-gnome 3.5.5-1
libreoffice-impress 3.5.5-1
libreoffice-math 3.5.5-1
libreoffice-writer 3.5.5-1
librpcsecgss 0.19-7
librsvg 2.36.1-1
librsync 0.9.7-6
libsamplerate 0.1.8-1
libsasl 2.1.23-9
libshiboken 1.1.1-1
libshout 1:2.3.0-1
libsidplay 1.36.59-5
libsigc++ 2.2.10-2
libsigsegv 2.10-1
libsm 1.2.1-1
libsndfile 1.0.25-2
libsocialweb 0.25.20-1
libsoup 2.38.1-1
libsoup-gnome 2.38.1-1
libspectre 0.2.7-1
libssh 0.5.2-1
libssh2 1.4.2-1
libstdc++5 3.3.6-4
libsystemd 188-2
libtasn1 2.13-1
libthai 0.1.18-1
libtheora 1.1.1-2
libtiff 4.0.2-1
libtiff4 3.9.5-4
libtiger 0.3.4-3
libtirpc 0.2.2-2
libtool 2.4.2-6
libtorrent-rasterbar 1:0.16.2-1
libtracker-sparql 0.14.2-1
libunique 1.1.6-5
libunique3 3.0.2-2
libunistring 0.9.3-5
libunrar 4.2.4-1
libupnp 1.6.17-1
libusb-compat 0.1.4-2
libusbx 1.0.12-2
libva 1.1.0-1
libvdpau 0.4.1-2
libvisual 0.4.0-4
libvncserver 0.9.9-1
libvorbis 1.3.3-1
libvpx 1.1.0-1
libwacom 0.6-1
libwbclient 3.6.7-1
libwebkit 1.8.2-1
libwebkit3 1.8.2-1
libwebp 0.1.99-1
libwmf 0.2.8.4-9
libwnck 2.30.7-1
libwnck3 3.4.2-1
libwpd 0.9.4-1
libwpg 0.2.1-1
libwps 0.2.2-2
libx11 1.5.0-1
libxau 1.0.7-1
libxaw 1.0.11-1
libxcb 1.8.1-1
libxcomposite 0.4.3-2
libxcursor 1.1.13-1
libxdamage 1.1.3-2
libxdmcp 1.1.1-1
libxext 1.3.1-1
libxfce4ui 4.10.0-1
libxfce4util 4.10.0-1
libxfixes 5.0-2
libxfont 1.4.5-1
libxft 2.3.1-1
libxi 1.6.1-1
libxinerama 1.1.2-1
libxkbfile 1.0.8-1
libxklavier 5.2.1-2
libxmi 1.2-5
libxml2 2.8.0-1
libxmu 1.1.1-1
libxp 1.0.1-3
libxpm 3.5.10-1
libxrandr 1.4.0-1
libxrender 0.9.7-1
libxres 1.0.6-1
libxslt 1.1.26-3
libxss 1.2.2-1
libxt 1.1.3-1
libxtst 1.2.1-1
libxv 1.0.7-1
libxvmc 1.0.7-1
libxxf86dga 1.1.3-1
libxxf86vm 1.1.2-1
libyaml 0.1.4-2
libytnef 1.5-3
libzeitgeist 0.3.18-2
licenses 2.9-1
liferea 1.8.7-1
links 2.7-1
linux 3.4.7-1
linux-api-headers 3.4.6-1
linux-ck-corex 3.4.8-1
linux-ck-corex-headers 3.4.8-1
linux-docs 3.4.7-1
linux-firmware 20120625-1
linux-headers 3.4.7-1
linux-mainline 3.6rc1-1
linux-manpages 3.1-1
linux-pf-core2 3.5.1-1
lirc-utils 1:0.9.0-22
llvm 3.1-4
lmms 0.4.13-1
logrotate 3.8.2-1
lpsolve 5.5.2.0-2
lsof 4.86-1
lua 5.1.5-2
lvm2 2.02.96-3
lyx 2.0.4-1
lzo2 2.06-1
m4 1.4.16-2
make 3.82-4
makedepend 1.0.3-2
makehuman 1.0alpha6-1
man-db 2.6.2-1
man-pages 3.41-1
mash 0.2.0-1
maxima 5.27.0-2
mc 4.8.4-1
mcelog 1.0pre3-3
mcpp 2.7.2-4
mdadm 3.2.5-2
media-player-info 17-1
megaglest 3.6.0.3-3
megaglest-data 3.6.0.3-1
meld 1.6.0-1
mencoder 35014-1
mercurial 2.3-1
mesa 8.0.4-2
metacity 2.34.5-1
metakit 2.4.9.7-5
mime-types 8-1
miniupnpc 1.6-2
miro 5.0.2-1
mixxx 1.10.1-1
mjpegtools 2.0.0-2
mkinitcpio 0.10-1
mkinitcpio-busybox 1.20.1-1
mkvtoolnix-cli 5.7.0-3
mlocate 0.25-2
mlt 0.8.0-1
mobile-broadband-provider-info 20120614-1
modemmanager 0.5.2.0-2
modprobed_db 2.0-2
mono 2.10.8-1
mono-addins 0.6.2-2
mono-basic 2.10-2
mono-debugger 2.10-2
mono-tools 2.10-2
mono-upnp 0.1.2-1
mono-zeroconf 0.9.0-3
monodevelop 3.0.3.5-2
monodevelop-debugger-gdb 3.0.3.5-1
monodevelop-debugger-mdb 2.4-1
mousetweaks 3.4.2-1
mozilla-common 1.4-3
mpfr 3.1.1-1
mpg123 1.14.4-1
mplayer 35014-1
mtasc 20091229-4
mtdev 1.1.2-1
mtools 4.0.17-2
musicbrainz 2.1.5-5
mutagen 1.20-4
mutter 3.4.1-2
mx 1.4.6-1
mysql 5.5.27-1
mysql-clients 5.5.27-1
mysql-python 1.2.3-3
namcap 3.2.4-1
nano 2.2.6-2
nasm 2.10.03-1
nautilus 3.4.2-1
nautilus-dropbox 1.4.0-2
nautilus-open-terminal 0.19-2
nautilus-sendto 3.0.3-1
ncftp 3.2.5-2
ncurses 5.9-3
neko 1.8.2-8
neon 0.29.6-4
nepomuk-core 4.9.0-1
net-snmp 5.7.1-3
net-tools 1.60.20110819cvs-3
netcdf 4.2.1-1
netkit-bsd-finger 0.17-7
netlogo 5.0.2-1
nettle 2.5-1
network-manager-applet 0.9.4.1-1
networkmanager 0.9.4.0-6
networkmanager-dispatcher-netfs 1.0-2
networkmanager-dispatcher-ntpd 1.0-3
networkmanager-dispatcher-openntpd 1.0-4
networkmanager-openconnect 0.9.4.0-1
networkmanager-openvpn 0.9.4.0-1
networkmanager-pptp 0.9.4.0-1
networkmanager-vpnc 0.9.4.0-1
nfs-utils 1.2.6-1
nfsidmap 0.24-3
nickle 2.70-2
nltk-data 2.0-7
nmap 6.01-1
notification-daemon 0.7.4-1
nouveau-dri 8.0.4-2
nouveau-firmware 20091212-4
nspluginwrapper 1.4.4-2.1
nspr 4.9.2-1
nss 3.13.5-1
nss-mdns 0.10-5
ntfs-3g 2012.1.15-3
ntfsprogs 2012.1.15-3
ntp 4.2.6.p5-7
nvidia-cg-toolkit 3.1-2
obex-data-server 0.4.6-2
obexd-client 0.47-1
ocaml 3.12.1-3
ocrfeeder 0.7.9-1
octave 3.6.2-1
ogre 1.8.0-3
ogre-docs 1.8.0-3
ois 1.3-2
opal 3.10.5-1
openal 1.14-1
opencollada 869-1
openconnect 1:3.18-1
opencore-amr 0.1.3-1
opencv-svn 9044-1
openexr 1.7.0-2
openimageio 1.0.8-1
openjpeg 1.5.0-1
openmpi 1.6-2
openntpd 3.9p1-15
openobex 1.5-3
openresolv 3.5.1-1
opensc 0.12.2-3
openslp 1.2.1-4
openssh 6.0p1-3
openssl 1.0.1.c-1
openvpn 2.2.2-1
oprofile 0.9.7-4
orbit2 2.14.19-2
orc 0.4.16-1
orca 3.4.2-1
oxygen-icons 4.9.0-1
p11-kit 0.12-1
p7zip 9.20.1-6
package-query 1.0.1-1
packagekit 0.6.22-1
pacman 4.0.3-3
pacman-color 4.0.3-3
pacman-contrib 4.0.3-1
pacman-mirrorlist 20120626-1
pacmatic 20120218-1
pam 1.1.5-4
pambase 20120701-1
pango 1.30.1-1
pango-perl 1.223-2
pangomm 2.28.4-1
paprefs 0.9.10-2
parted 3.1-1
patch 2.6.1-3
pavucontrol 1.0-1
pbsdk-linux 1.1.0-1
pciutils 3.1.10-1
pcmciautils 018-4
pcre 8.31-1
pcsc-ctapi-wrapper 0.3-1
pcsc-cyberjack 3.99.5_SP03-2
pcsc-perl 1.4.12-3
pcsc-tools 1.4.20-1
pcsclite 1.8.5-1
pdfcrack 0.11-1
pdfedit 0.4.5-2
pdnsd 1.2.9-2
perl 5.16.1-1
perl-crypt-ssleay 0.64-1
perl-digest-sha1 2.13-3
perl-encode-locale 1.03-1
perl-error 0.17018-1
perl-file-listing 6.04-1
perl-html-parser 3.69-2
perl-html-tagset 3.20-3
perl-http-cookies 6.01-1
perl-http-daemon 6.01-1
perl-http-date 6.02-1
perl-http-message 6.03-1
perl-http-negotiate 6.01-1
perl-image-exiftool 8.99-1
perl-io-socket-ssl 1.76-1
perl-libwww 6.04-1
perl-locale-gettext 1.05-9
perl-lwp-mediatypes 6.02-1
perl-lwp-protocol-https 6.03-1
perl-mozilla-ca 20120309-1
perl-net-http 6.03-1
perl-net-ssleay 1.48-2
perl-string-crc32 1.4-8
perl-test-pod 1.45-1
perl-try-tiny 0.11-1
perl-uri 1.60-1
perl-www-robotrules 6.02-1
perl-xml-libxml 1.98-1
perl-xml-libxslt 1.77-1
perl-xml-namespacesupport 1.11-2
perl-xml-parser 2.41-3
perl-xml-sax 0.99-3
perl-xml-sax-base 1.08-2
perl-xml-simple 2.20-1
perl-yaml-syck 1.20-2
pgu 0.18-1
phonon 1:4.6.0-2
phonon-gstreamer 4.6.2-1
physfs 2.0.2-2
pidgin 2.10.6-1
pilot-link 0.12.5-3
pinentry 0.8.1-4
pitivi 0.15.2-1
pixman 0.26.2-1
pkg-config 0.27-1
pkgfile 3-1
pkgtools 24-3
pm-quirks 0.20100619-2
pm-utils 1.4.1-5
podofo 0.9.1-3
polipo 1.0.4.1-6
polkit 0.105-1
polkit-gnome 0.105-1
polkit-qt 0.103.0-1
poppler 0.20.2-1
poppler-data 0.4.5-1
poppler-glib 0.20.2-1
poppler-qt 0.20.2-1
popt 1.16-5
portaudio 19_20111121-1
portmidi 217-3
postgresql-libs 9.1.4-1
powertop 2.0-1
ppl 1.0-1
ppp 2.4.5-3
pptpclient 1.7.2-4
printproto 1.0.5-2
prison 1.0-1
procps-ng 3.3.3-3
proj 4.8.0-1
psmisc 22.19-1
pstotext 1.9-2
pth 2.0.7-4
ptlib 2.10.5-1
pulseaudio 2.1-1
pulseaudio-alsa 2-1
pv 1.3.4-1
pyalpm 0.5.3-1
pyatspi 2.4.0-1
pygobject-devel 3.2.2-1
pygobject2-devel 2.28.6-6
pygoocanvas 0.14.1-5
pygtk 2.24.0-3
pygtksourceview2 2.10.1-4
pyjamas 0.8-1
pylint 0.25.2-1
pyogg 1.3-7
pyopenssl 0.13-1
pyorbit 2.24.0-4
pypy 1.9-1
pyqt 4.9.4-2
pyqt-common 4.9.4-2
pyrex 0.9.9-3
pyrtf 0.45-5
pyside 1.1.0-1
pyside-tools 0.2.13-5
python 3.2.3-3
python-all-odfpy 0.9.4-2
python-boto 2.4.1-1
python-cairo 1.10.0-1
python-cjson 1.0.5-4
python-dbus 1.1.1-1
python-dbus-common 1.1.1-1
python-decorator 3.3.3-1
python-distribute 0.6.28-1
python-distutils-extra 2.32-1
python-docs 3.2.3-1
python-docutils 0.9.1-1
python-egenix-mx-base 3.2.4-1
python-foolscap 0.6.3-1
python-fpconst 0.7.3-3
python-gnomekeyring 2.32.0-10
python-gnupginterface 0.3.2-6
python-gtop 2.32.0-10
python-imaging 1.1.7-4
python-jinja 2.6-2
python-logilab-astng 0.24.0-1
python-logilab-common 0.58.2-1
python-lxml 2.3.5-1
python-m2crypto 0.21.1-1
python-markupsafe 0.15-1
python-mechanize 0.2.5-2
python-nose 1.1.2-3
python-notify 0.1.1-11
python-numpy 1.6.2-1
python-opengl 3.0.1-4
python-paramiko 1.7.7.1-2
python-pexpect 2.4-1
python-pip 1.1-1
python-pychart 1.39-6
python-pycurl 7.19.0-6
python-pyelftools 0.20-1
python-pyenchant 1.6.5-1
python-pygame 1.9.1-5
python-pygments 1.5-2
python-pyparsing 1.5.6-2
python-pysqlite 2.6.3-2
python-pyzmq 2.2.0-1
python-qscintilla 2.6.2-1
python-qscintilla-common 2.6.2-1
python-reportlab 2.5-2
python-rope 0.9.3-6
python-rsvg 2.32.0-10
python-scipy 0.10.1-1
python-sip 4.13.3-2
python-soappy 0.12.0-10
python-south 0.7.6-1
python-sphinx 1.1.3-2
python-sqlalchemy 0.7.6-1
python-tornado 2.2.1-1
python-wnck 2.32.0-10
python-yaml 3.10-2
python2 2.7.3-2
python2-beautifulsoup3 3.2.1-1
python2-bonobo 2.28.1-8
python2-bsdiff4 1.1.1-1
python2-cairo 1.10.0-1
python2-cherrypy 3.2.2-1
python2-crypto 2.6-2
python2-cssutils 0.9.9-2
python2-dateutil 1.5-2
python2-dbus 1.1.1-1
python2-distribute 0.6.28-1
python2-distutils-extra 2.32-1
python2-dnspython 1.10.0-1
python2-docutils 0.9.1-1
python2-egg 2.25.3-12
python2-gconf 2.28.1-8
python2-gksu2 2.25.3-12
python2-gnomecanvas 2.28.1-8
python2-gnomevfs 2.28.1-8
python2-gobject 3.2.2-1
python2-gobject2 2.28.6-6
python2-gtkhtml2 2.25.3-12
python2-gtkspell 2.25.3-12
python2-html5lib 0.95-1
python2-jinja 2.6-2
python2-libgnome 2.28.1-8
python2-lxml 2.3.5-1
python2-markupsafe 0.15-1
python2-matplotlib 1.1.1-1
python2-nltk 2.0.2-1
python2-nose 1.1.2-3
python2-numpy 1.6.2-1
python2-pip 1.1-1
python2-ply 3.4-1
python2-poppler 0.12.1-7
python2-psycopg2 2.4.5-1
python2-pychm 0.8.4-1
python2-pyenchant 1.6.5-1
python2-pygments 1.5-2
python2-pyopenssl 0.13-1
python2-pyparsing 1.5.6-2
python2-pyqt 4.9.4-2
python2-pytz 2012d-1
python2-pyzmq 2.2.0-1
python2-qscintilla 2.6.2-1
python2-rope 0.9.4-1
python2-sip 4.13.3-2
python2-sphinx 1.1.3-2
python2-sqlalchemy 0.7.6-1
python2-tornado 2.2.1-1
python2-w3lib 1.0-1
python2-xdg 0.23-1
python2-yaml 3.10-2
python2-zope-interface 3.8.0-1
python3-html5lib-hg 1757-1
pywebkitgtk 1.1.8-2
pyxml 0.8.4-9
q4wine 0.121-4
qca 2.0.3-2
qcachegrind 0.7.1-1
qemu-kvm 1.1.1-1
qhull 2012.1-1
qimageblitz 0.0.6-2
qjson 0.7.1-2
qrencode 3.3.1-1
qscintilla 2.6.2-1
qt 4.8.2-3
qt-assistant-compat 4.6.3-2
qt-doc 4.8.2-1
qt3 1:3.3.8b-1
qtcreator 2.5.2-1
qtwebkit 2.2.2-1
qucs 0.0.16-2
r 2.15.1-2
randrproto 1.4.0-1
rapidsvn 0.12.0-5
raptor 2.0.8-1
rar 4.1.1-1
rarcrack 0.2-1
rarian 0.8.1-2
rasqal 1:0.9.29-1
rdesktop 1.7.1-2
readline 6.2.004-1
recode 3.6-7
recoll 1.17.3-1
recordmydesktop 0.3.8.1-6
recordproto 1.14.2-1
redland 1:1.0.15-3
redland-storage-virtuoso 1:1.0.15-3
reiserfsprogs 3.6.21-4
remmina 1.0.0-9
renderproto 0.11.1-2
rest 0.7.12-1
rpcbind 0.2.0-8
rsync 3.0.9-3
rtkit 0.11-1
rtmpdump 2.4-1
ruby 1.9.3_p194-2
ruby-atk 1.1.3-2
ruby-cairo 1.12.2-1
ruby-docs 1.9.3_p194-1
ruby-gdkpixbuf2 1.1.3-2
ruby-gio2 1.1.3-2
ruby-glib2 1.1.3-2
ruby-gtk2 1.1.3-2
ruby-pango 1.1.3-2
ruby-pkgconfig 1.1.3-1
run-parts 4.3.2-1
rygel 0.14.3-1
sage-mathematics 5.2-1
samba 3.6.7-1
sane 1.0.22-9
sbcl 1.0.57-1
scanmem 0.12-2
schroedinger 1.0.11-1
scite 3.2.1-1
scrapy-stable-git 20110925-1
screen 4.0.3-13
screenlets 0.1.6-3
scribus 1.4.1-1
scrnsaverproto 1.2.2-1
scummvm 1.4.1-2
sdl 1.2.15-1
sdl_gfx 2.0.23-1
sdl_image 1.2.12-2
sdl_mixer 1.2.12-1
sdl_net 1.2.8-1
sdl_sound 1.0.3-3
sdl_ttf 2.0.11-2
seabios 1.7.0-1
seahorse 3.4.1-1
sed 4.2.1-4
seed 3.2.0-2
setconf 0.5.2-1
sfml 2.0rc1-2
sg3_utils 1.33-1
shadow 4.1.5.1-1
shared-color-profiles 0.1.5-1
shared-color-targets 0.1.1-1
shared-desktop-ontologies 0.10.0-1
shared-mime-info 1.0-1
shotwell 0.12.3-1
sigil 0.5.902-1
sip 4.13.3-2
sk1libs 0.9.1-3
skype 4.0.0.8-1
skype4pidgin 20110407-1
slang 2.2.4-2
slashem 0.0.7E7F3-2
slim 1.3.4-2
smartmontools 5.43-1
smbclient 3.6.7-1
smpeg 0.4.4-6
smplayer 0.8.0-1
smplayer-themes 20120131-1
sofia-sip 1.12.11-1
soprano 2.8.0-2
sound-juicer 3.4.0-1
sound-theme-freedesktop 0.7-2
soundtouch 1.6.0-1
sox 14.4.0-3
speech-dispatcher 0.7.1-6
speex 1.2rc1-2
splint 3.1.2-3
sqlite 3.7.13-1
sqlite2 2.8.17-5
sqlitebrowser 2.0b1-2
sqliteman 1.2.2-5
startup-notification 0.12-3
strigi 0.7.7-2
stunnel 4.53-2
subversion 1.7.5-2
sudo 1.8.5.p2-1
suitesparse 4.0.2-1
supermeatboy 20120607-16
sushi 0.4.1-2
swftools 0.9.2-1
swig 2.0.7-2
switzerland 0.1.0-2
sysfsutils 2.1.0-8
syslinux 4.05-4
syslog-ng 3.3.5-2
system-config-lvm 1.1.16-1
systemd 188-2
systemd-arch-units 20120704-1
systemd-sysvcompat 188-2
systemd-tools 188-2
systemd-ui-git 20120807-1
t1lib 5.1.2-3
taglib 1.7.2-2
taglib-sharp 2.0.4.0-1
talloc 2.0.7-1
tar 1.26-2
tcl 8.5.12-1
tdb 1.2.9-2
telepathy-farstream 0.4.0-1
telepathy-gabble 0.16.1-1
telepathy-glib 0.18.1-1
telepathy-haze 0.6.0-2
telepathy-idle 0.1.11-1
telepathy-logger 0.4.0-1
telepathy-mission-control 5.12.1-1
telepathy-rakia 0.7.4-1
telepathy-salut 0.8.0-1
terminal 0.4.8-2
tesseract 3.01-3
texi2html 5.0-2
texinfo 4.13a-7
texlive-bibtexextra 2012.26868-1
texlive-bin 2012.0-3
texlive-core 2012.26892-2
texlive-fontsextra 2012.26866-1
texlive-formatsextra 2012.26689-1
texlive-games 2012.26207-1
texlive-genericextra 2012.26700-1
texlive-htmlxml 2012.24013-1
texlive-humanities 2012.25861-1
texlive-langcjk 2012.26777-2
texlive-langcyrillic 2012.26689-1
texlive-langextra 2012.26750-1
texlive-langgreek 2012.26313-1
texlive-latexextra 2012.26807-1
texlive-music 2012.26726-1
texlive-pictures 2012.26791-1
texlive-plainextra 2012.25953-1
texlive-pstricks 2012.26865-1
texlive-publishers 2012.26831-1
texlive-science 2012.26607-1
texmacs 1.0.7.15-1
tftp-hpa 5.2-2
thunar 1.4.0-2
tk 8.5.12-1
tmux 1.6-2
tofrodos 1.7.9-1
tomboy 1.10.2-1
tor 0.2.2.37-1
totem 3.4.3-1
totem-plparser 3.4.2-1
totem-plugin 3.4.3-1
totem-plugin-arte 3.1.1-1
tracker 0.14.2-1
transcode 1.1.7-5
transfig 3.2.5d-1
transmission-gtk 2.61-1
truecrypt 1:7.1a-1
tsocks 1.8beta5-5
ttf-adobe-fangsong 5.004-1
ttf-adobe-fonts 10.1.2-1
ttf-adobe-heiti 5.005-1
ttf-adobe-kaiti 5.004-1
ttf-adobe-song 5.002-1
ttf-arphic-ukai 0.2.20080216.1-3
ttf-arphic-uming 0.2.20080216.1-3
ttf-baekmuk 2.2-7
ttf-bitstream-vera 1.10-8
ttf-cheapskate 2.0-8
ttf-dejavu 2.33-3
ttf-droid 20110417-2
ttf-freebanglafont 20120206-2
ttf-freefont 20120503-1
ttf-indic-otf 0.2-6
ttf-linux-libertine 5.3.0-1
ttf-ms-fonts 2.0-9
ttf-sazanami 20040629-7
ttf-source-sans-pro 1.033-2
ttf-tlwg 0.5.0-1
ttf-ubraille 001.000-6
ttf-vista-fonts 1-5
tumbler 0.1.25-1
twisted 12.1.0-1
tzdata 2012e-1
udisks 1.0.4-4
udisks2 1.94.0-2
uniconvertor 1.1.5-5
unixodbc 2.3.1-1
unpaper 0.4.2-1
unrar 4.2.4-1
unrtf 0.21.2-1
unzip 6.0-6
upower 0.9.17-2
usb_modeswitch 1.2.3-2
usbmuxd 1.0.8-1
usbutils 006-1
util-linux 2.21.2-5
v4l-utils 0.8.8-1
v8 3.9.9-1
vala 0.16.1-1
valgrind 3.8.0-1
vba-m-gtk-svn 1108-1
vbaexpress 1.2-5
vcdimager 0.7.24-2
vde2 2.3.2-1
vdpau-video 0.7.3-3
vi 1:050325-2
vidalia 0.2.20-1
videoproto 2.3.1-2
vim 7.3.600-1
vim-a 2.18-6
vim-bufexplorer 7.2.8-5
vim-buftabs 0.18-1
vim-clang-complete 1.8-1
vim-colorsamplerpack 8.03-3
vim-doxygentoolkit 0.2.13-2
vim-guicolorscheme 1.2-3
vim-minibufexpl 6.4.2-2
vim-project 1.4.1-6
vim-runtime 7.3.600-1
vim-spell-de 20120506-1
vim-spell-en 20120506-1
vim-taglist 45-5
vim-vcscommand 1.99.46-2
vim-workspace 1.0b1-6
vinagre 3.4.2-1
vino 3.4.2-1
virtualbox 4.1.18-5
virtualbox-ext-oracle 4.1.18-1
virtualbox-modules 4.1.18-4
virtualbox-source 4.1.18-5
virtuoso 6.1.6-1
virtuoso-base 6.1.6-1
visualboyadvance 1.7.2-9
vlc 2.0.3-2
vpnc 0.5.3.svn516-3
vte 0.28.2-3
vte-common 0.32.2-1
vte-sharp 2.26.0-8
vte3 0.32.2-1
vulture-nethack 2.3.67-0
warsow 1.0-1
warsow-data 1.0-1
wavpack 4.60.1-2
webkit-sharp 0.3-4
webrtc-audio-processing 0.1-1
weka 3.7.5-1
wesnoth 1.10.3-2
wesnoth-data 1.10.3-1
wget 1.14-1
which 2.20-5
whois 5.0.18-1
widelands 17-3
widelands-data 17-1
wildmidi 0.2.3.5-2
wine 1.5.10-1
wine_gecko 1.7-1
winegame 0.2.0-2
winestuff 0.2.0-2
winetricks 20120308-1
wireless-regdb 2011.04.28-1
wireless_tools 29-6
wireshark-cli 1.8.1-1
wireshark-gtk 1.8.1-1
wnck-sharp 2.26.0-8
wpa_supplicant 1.0-1
wvdial 1.61-4
wvstreams 4.6.1-5
wxgtk 2.8.12.1-3
wxmaxima 12.04.0-1
wxpython 2.8.12.1-3
x264 20120705-1
xapian-core 1.2.12-1
xbitmaps 1.1.1-2
xcb-proto 1.7.1-1
xcb-util 0.3.9-1
xcb-util-keysyms 0.3.9-1
xchat 2.8.8-10
xcursor-themes 1.0.3-2
xdg-user-dirs 0.14-3
xdg-utils 1.1.0-2.20120520
xerces-c 3.1.1-3
xextproto 7.2.1-1
xf86-input-evdev 2.7.3-1
xf86-input-synaptics 1.6.2-1
xf86-video-fbdev 0.4.3-1
xf86-video-nouveau 1.0.1-1
xf86-video-vesa 2.3.2-1
xf86dgaproto 2.1-2
xf86vidmodeproto 2.3.1-2
xfce4-appfinder 4.10.0-1
xfce4-mixer 4.8.0-4
xfce4-panel 4.10.0-1
xfce4-session 4.10.0-3
xfce4-settings 4.10.0-2
xfconf 4.10.0-2
xfdesktop 4.10.0-3
xfsprogs 3.1.8-2
xfwm4 4.10.0-2
xfwm4-themes 4.10.0-1
xine-lib 1.2.2-1
xine-ui 0.99.7-1
xineramaproto 1.2.1-2
xinetd 2.3.15-2
xkeyboard-config 2.6-1
xmind 3.2.1-1
xmldiff 0.6.10-2
xmlto 0.0.25-2
xmlwrapp 0.6.2-2
xorg-bdftopcf 1.0.3-2
xorg-docs 1.7-1
xorg-font-util 1.3.0-1
xorg-font-utils 7.6-3
xorg-fonts-100dpi 1.0.1-4
xorg-fonts-75dpi 1.0.1-4
xorg-fonts-alias 1.0.2-2
xorg-fonts-encodings 1.0.4-3
xorg-fonts-misc 1.0.1-2
xorg-iceauth 1.0.5-1
xorg-luit 1.1.1-1
xorg-mkfontdir 1.0.7-1
xorg-mkfontscale 1.1.0-1
xorg-server 1.12.3.901-1
xorg-server-common 1.12.3.901-1
xorg-server-devel 1.12.3.901-1
xorg-server-utils 7.6-3
xorg-sessreg 1.0.7-1
xorg-setxkbmap 1.3.0-1
xorg-twm 1.0.7-1
xorg-util-macros 1.17-1
xorg-utils 7.6-8
xorg-xauth 1.0.7-1
xorg-xbacklight 1.1.2-3
xorg-xcmsdb 1.0.4-1
xorg-xdpyinfo 1.3.0-1
xorg-xdriinfo 1.0.4-3
xorg-xev 1.2.0-1
xorg-xgamma 1.0.5-1
xorg-xhost 1.0.5-1
xorg-xinit 1.3.2-1
xorg-xinput 1.6.0-1
xorg-xkbcomp 1.2.4-1
xorg-xlsatoms 1.1.1-1
xorg-xlsclients 1.1.2-2
xorg-xmessage 1.0.3-2
xorg-xmodmap 1.0.7-1
xorg-xprop 1.2.1-1
xorg-xrandr 1.3.5-1
xorg-xrdb 1.0.9-2
xorg-xrefresh 1.0.4-3
xorg-xset 1.2.2-1
xorg-xsetroot 1.1.0-3
xorg-xvinfo 1.1.1-3
xorg-xwininfo 1.1.2-1
xpdf 3.03-2
xplc 0.3.13-4
xproto 7.0.23-1
xterm 281-1
xulrunner192 1.9.2.28-3
xvidcore 1.3.2-1
xz 5.0.4-1
yajl 2.0.4-1
yaourt 1.1-1
yasm 1.2.0-2
yelp 3.4.2-1
yelp-xsl 3.4.2-1
zeitgeist 0.9.0.1-1
zenity 3.4.0-1
zeromq 2.2.0-2
zip 3.0-3
zlib 1.2.7-1
zsh 5.0.0-2
zsh-completions-git 20120808-2
zvbi 0.2.33-4
zziplib 0.13.62-1
Here some logs:
% journalctl
Aug 13 20:16:58 Primat systemd-journal[141]: Journal started
Aug 13 20:16:59 Primat systemd-modules-load[149]: Inserted module 'nfs'
Aug 13 20:17:06 Primat vgchange[219]: 3 logical volume(s) in volume group "vg_Primat" now active
Aug 13 20:17:08 Primat mtp-probe[365]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-4"
Aug 13 20:17:08 Primat mtp-probe[349]: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1"
Aug 13 20:17:08 Primat mtp-probe[365]: bus: 1, device: 3 was not an MTP device
Aug 13 20:17:08 Primat mtp-probe[349]: bus: 4, device: 2 was not an MTP device
Aug 13 20:17:11 Primat systemd-cryptsetup[439]: Set cipher aes, mode cbc-essiv:sha256, key size 256 bits for device /dev/sda1.
Aug 13 20:17:14 Primat systemd-fsck[437]: /dev/sda2: sauber, 344/122160 Dateien, 288834/487974 Blöcke
Aug 13 20:17:20 Primat mkswap[483]: mkswap: /dev/mapper/swap: warning: don't erase bootbits sectors
Aug 13 20:17:20 Primat mkswap[483]: on whole disk. Use -f to force.
Aug 13 20:17:21 Primat mkswap[483]: Swapbereich Version 1 wird angelegt, Größe = 6265312 KiB
Aug 13 20:17:21 Primat mkswap[483]: kein Label, UUID=cbbb92b0-02cb-46c4-8051-efa98b0669c8
Aug 13 20:17:22 Primat bluetoothd[497]: bluetoothd[497]: Bluetooth daemon 4.101
Aug 13 20:17:21 Primat bluetoothd[497]: Bluetooth daemon 4.101
Aug 13 20:17:22 Primat avahi-daemon[501]: Found user 'avahi' (UID 84) and group 'avahi' (GID 84).
Aug 13 20:17:22 Primat avahi-daemon[501]: Successfully dropped root privileges.
Aug 13 20:17:22 Primat avahi-daemon[501]: avahi-daemon 0.6.31 starting up.
Aug 13 20:17:22 Primat acpid[505]: starting up with netlink and the input layer
Aug 13 20:17:22 Primat acpid[505]: 4 rules loaded
Aug 13 20:17:22 Primat acpid[505]: waiting for events: event logging is off
Aug 13 20:17:22 Primat /usr/sbin/crond[498]: (CRON) INFO (Syslog will be used instead of sendmail.): Datei oder Verzeichnis nicht gefunden
Aug 13 20:17:22 Primat /usr/sbin/crond[498]: (CRON) INFO (running with inotify support)
Aug 13 20:17:22 Primat smartd[522]: smartd 5.43 2012-06-30 r3573 [x86_64-linux-3.4.8-1-ck] (local build)
Aug 13 20:17:22 Primat smartd[522]: Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
Aug 13 20:17:22 Primat smartd[522]: Opened configuration file /etc/smartd.conf
Aug 13 20:17:22 Primat smartd[522]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Aug 13 20:17:22 Primat smartd[522]: Device: /dev/sda, type changed from 'scsi' to 'sat'
Aug 13 20:17:22 Primat smartd[522]: Device: /dev/sda [SAT], opened
Aug 13 20:17:22 Primat smartd[522]: Device: /dev/sda [SAT], SAMSUNG HM320JI, S/N:S16LJD0Q4*****, WWN:5-0f0000-0014*****, FW:2SS00_01, 320 GB
Aug 13 20:17:22 Primat smartd[522]: Device: /dev/sda [SAT], found in smartd database: SAMSUNG SpinPoint M6
Aug 13 20:17:23 Primat bluetoothd[497]: bluetoothd[497]: Starting SDP server
Aug 13 20:17:23 Primat bluetoothd[497]: Starting SDP server
Aug 13 20:17:23 Primat avahi-daemon[501]: Successfully called chroot().
Aug 13 20:17:23 Primat avahi-daemon[501]: Successfully dropped remaining capabilities.
Aug 13 20:17:23 Primat avahi-daemon[501]: Loading service file /services/sftp-ssh.service.
Aug 13 20:17:23 Primat avahi-daemon[501]: Loading service file /services/ssh.service.
Aug 13 20:17:23 Primat avahi-daemon[501]: Loading service file /services/udisks.service.
Aug 13 20:17:23 Primat avahi-daemon[501]: Network interface enumeration completed.
Aug 13 20:17:23 Primat avahi-daemon[501]: Registering HINFO record with values 'X86_64'/'LINUX'.
Aug 13 20:17:23 Primat avahi-daemon[501]: Server startup complete. Host name is Primat.local. Local service cookie is 59663620.
Aug 13 20:17:23 Primat avahi-daemon[501]: Service "Primat" (/services/udisks.service) successfully established.
Aug 13 20:17:23 Primat avahi-daemon[501]: Service "Primat" (/services/ssh.service) successfully established.
Aug 13 20:17:23 Primat avahi-daemon[501]: Service "Primat" (/services/sftp-ssh.service) successfully established.
Aug 13 20:17:23 Primat systemd-logind[525]: New seat seat0.
Aug 13 20:17:23 Primat bluetoothd[497]: bluetoothd[497]: Bluetooth Management interface initialized
Aug 13 20:17:23 Primat bluetoothd[497]: Bluetooth Management interface initialized
Aug 13 20:17:23 Primat systemd-logind[525]: Watching system buttons on /dev/input/event4 (Power Button)
Aug 13 20:17:23 Primat systemd-logind[525]: Watching system buttons on /dev/input/event1 (Video Bus)
Aug 13 20:17:23 Primat systemd-logind[525]: Watching system buttons on /dev/input/event3 (Power Button)
Aug 13 20:17:23 Primat systemd-logind[525]: Watching system buttons on /dev/input/event2 (Lid Switch)
Aug 13 20:17:23 Primat NetworkManager[516]: <info> NetworkManager (version 0.9.4.0) is starting...
Aug 13 20:17:23 Primat NetworkManager[516]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
Aug 13 20:17:23 Primat NetworkManager[516]: <info> VPN: loaded org.freedesktop.NetworkManager.vpnc
Aug 13 20:17:23 Primat NetworkManager[516]: <info> VPN: loaded org.freedesktop.NetworkManager.openvpn
Aug 13 20:17:23 Primat NetworkManager[516]: <info> VPN: loaded org.freedesktop.NetworkManager.pptp
Aug 13 20:17:23 Primat NetworkManager[516]: <info> VPN: loaded org.freedesktop.NetworkManager.openconnect
Aug 13 20:17:23 Primat dbus-daemon[527]: dbus[527]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
Aug 13 20:17:23 Primat dbus[527]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
Aug 13 20:17:23 Primat bluetoothd[497]: bluetoothd[497]: input-headset driver probe failed for device 6C:9B:02:FD:**:**
Aug 13 20:17:23 Primat bluetoothd[497]: input-headset driver probe failed for device 6C:9B:02:FD:**:**
Aug 13 20:17:23 Primat bluetoothd[497]: bluetoothd[497]: input-headset driver probe failed for device 00:1B:DC:04:**:**
Aug 13 20:17:23 Primat bluetoothd[497]: input-headset driver probe failed for device 00:1B:DC:04:**:**
Aug 13 20:17:23 Primat bluetoothd[497]: bluetoothd[497]: input-headset driver probe failed for device BC:B1:F3:C8:**:**
Aug 13 20:17:23 Primat bluetoothd[497]: input-headset driver probe failed for device BC:B1:F3:C8:**:**
Aug 13 20:17:23 Primat smartd[522]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
Aug 13 20:17:23 Primat smartd[522]: Monitoring 1 ATA and 0 SCSI devices
Aug 13 20:17:23 Primat bluetoothd[497]: bluetoothd[497]: Adapter /org/bluez/497/hci0 has been enabled
Aug 13 20:17:23 Primat bluetoothd[497]: Adapter /org/bluez/497/hci0 has been enabled
Aug 13 20:17:24 Primat smartd[522]: Device: /dev/sda [SAT], previous self-test was interrupted by the host with a reset
Aug 13 20:17:24 Primat dbus-daemon[527]: dbus[527]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Aug 13 20:17:24 Primat dbus[527]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Aug 13 20:17:24 Primat NetworkManager[516]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
Aug 13 20:17:24 Primat NetworkManager[516]: keyfile: parsing *** ...
Aug 13 20:17:25 Primat acpid[505]: client connected from 849[0:0]
Aug 13 20:17:25 Primat acpid[505]: 1 client rule loaded
Aug 13 20:17:27 Primat dbus-daemon[527]: dbus[527]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
Aug 13 20:17:27 Primat dbus[527]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
Aug 13 20:17:28 Primat dbus-daemon[527]: dbus[527]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Aug 13 20:17:28 Primat dbus[527]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Aug 13 20:17:29 Primat dbus-daemon[527]: dbus[527]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.service'
Aug 13 20:17:29 Primat dbus[527]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.service'
Aug 13 20:17:29 Primat dbus-daemon[527]: dbus[527]: [system] Successfully activated service 'org.freedesktop.Accounts'
Aug 13 20:17:29 Primat dbus[527]: [system] Successfully activated service 'org.freedesktop.Accounts'
Aug 13 20:17:29 Primat dbus-daemon[527]: dbus[527]: [system] Activating via systemd: service name='org.freedesktop.ConsoleKit' unit='console-kit-daemon.service'
Aug 13 20:17:29 Primat dbus[527]: [system] Activating via systemd: service name='org.freedesktop.ConsoleKit' unit='console-kit-daemon.service'
Aug 13 20:17:29 Primat console-kit-daemon[887]: missing action
Aug 13 20:17:29 Primat dbus-daemon[527]: dbus[527]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Aug 13 20:17:29 Primat dbus[527]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Aug 13 20:17:30 Primat systemd-logind[525]: New session 1 of user gdm.
Aug 13 20:17:30 Primat systemd-logind[525]: Linked /tmp/.X11-unix/X0 to /run/user/120/X11-display.
Aug 13 20:17:30 Primat dbus-daemon[527]: dbus[527]: [system] Activating via systemd: service name='org.freedesktop.colord-sane' unit='colord-sane.service'
Aug 13 20:17:30 Primat dbus[527]: [system] Activating via systemd: service name='org.freedesktop.colord-sane' unit='colord-sane.service'
Aug 13 20:17:31 Primat dbus-daemon[527]: dbus[527]: [system] Successfully activated service 'org.freedesktop.colord-sane'
Aug 13 20:17:31 Primat dbus[527]: [system] Successfully activated service 'org.freedesktop.colord-sane'
Aug 13 20:17:32 Primat dbus-daemon[527]: dbus[527]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Aug 13 20:17:32 Primat dbus[527]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Aug 13 20:17:32 Primat dbus-daemon[527]: dbus[527]: [system] Successfully activated service 'org.freedesktop.UPower'
Aug 13 20:17:32 Primat dbus[527]: [system] Successfully activated service 'org.freedesktop.UPower'
Aug 13 20:17:36 Primat dbus-daemon[527]: dbus[527]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Aug 13 20:17:36 Primat dbus[527]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Aug 13 20:17:36 Primat systemd[1]: Failed to create cgroup cpu:/: No such file or directory
Aug 13 20:17:40 Primat dbus-daemon[527]: dbus[527]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Aug 13 20:17:40 Primat dbus[527]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Aug 13 20:17:40 Primat bluetoothd[497]: bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/HFPAG
Aug 13 20:17:40 Primat bluetoothd[497]: bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/HFPHS
Aug 13 20:17:40 Primat bluetoothd[497]: bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/A2DPSource
Aug 13 20:17:40 Primat bluetoothd[497]: bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/A2DPSink
Aug 13 20:17:40 Primat bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/HFPAG
Aug 13 20:17:40 Primat bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/HFPHS
Aug 13 20:17:40 Primat bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/A2DPSource
Aug 13 20:17:40 Primat bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/A2DPSink
Aug 13 20:17:42 Primat dbus-daemon[527]: dbus[527]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.31" (uid=120 pid=1629 comm="gnome-shell --gdm-mode ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.14" (uid=0 pid=887 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Aug 13 20:17:42 Primat dbus[527]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.31" (uid=120 pid=1629 comm="gnome-shell --gdm-mode ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.14" (uid=0 pid=887 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Aug 13 20:18:26 Primat systemd[1]: Job dev-mapper-vg_Primat\x2dlv_Home.device/start timed out.
Aug 13 20:18:26 Primat systemd[1]: Job home.mount/start failed with result 'dependency'.
Aug 13 20:18:26 Primat systemd[1]: Job systemd-fsck@dev-mapper-vg_Primat\x2dlv_Home.service/start failed with result 'dependency'.
Aug 13 20:18:26 Primat systemd[1]: Job dev-mapper-vg_Primat\x2dlv_Home.device/start failed with result 'timeout'.
Aug 13 20:18:38 Primat acpid[505]: client 849[0:0] has disconnected
Aug 13 20:18:52 Primat systemd[1]: NetworkManager.service operation timed out. Terminating.
Aug 13 20:18:52 Primat NetworkManager[516]: <info> caught signal 15, shutting down normally.
Aug 13 20:19:48 Primat acpid[505]: client connected from 849[0:0]
Aug 13 20:19:48 Primat acpid[505]: 1 client rule loaded
Aug 13 20:19:52 Primat acpid[505]: client 849[0:0] has disconnected
Aug 13 20:19:55 Primat acpid[505]: client connected from 849[0:0]
Aug 13 20:19:55 Primat acpid[505]: 1 client rule loaded
Aug 13 20:19:58 Primat systemd-logind[525]: Power key pressed.
Aug 13 20:19:58 Primat systemd-logind[525]: Refusing power-off, user is logged in.
Aug 13 20:19:58 Primat systemd[1]: Job graphical.target/start failed with result 'dependency'.
Aug 13 20:19:58 Primat bluetoothd[497]: bluetoothd[497]: Terminating
Aug 13 20:19:58 Primat bluetoothd[497]: bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/A2DPSink
Aug 13 20:19:58 Primat bluetoothd[497]: bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/A2DPSource
Aug 13 20:19:58 Primat bluetoothd[497]: bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/HFPAG
Aug 13 20:19:58 Primat bluetoothd[497]: bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/HFPHS
Aug 13 20:19:58 Primat bluetoothd[497]: Terminating
Aug 13 20:19:58 Primat bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/A2DPSink
Aug 13 20:19:58 Primat bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/A2DPSource
Aug 13 20:19:58 Primat bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/HFPAG
Aug 13 20:19:58 Primat bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/HFPHS
Aug 13 20:19:58 Primat dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
Aug 13 20:19:58 Primat dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
Aug 13 20:19:58 Primat dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
Aug 13 20:19:58 Primat dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
Aug 13 20:19:58 Primat avahi-daemon[501]: Got SIGTERM, quitting.
Aug 13 20:19:58 Primat acpid[505]: exiting
Aug 13 20:19:58 Primat dbus-daemon[527]: dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
Aug 13 20:19:58 Primat dbus-daemon[527]: dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
Aug 13 20:19:58 Primat dbus-daemon[527]: dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
Aug 13 20:19:58 Primat dbus-daemon[527]: dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
Aug 13 20:19:58 Primat iptables-flush[1693]: /usr/sbin/iptables
Aug 13 20:19:58 Primat bluetoothd[497]: bluetoothd[497]: Stopping SDP server
Aug 13 20:19:58 Primat bluetoothd[497]: bluetoothd[497]: Exit
Aug 13 20:19:58 Primat avahi-daemon[501]: avahi-daemon 0.6.31 exiting.
Aug 13 20:19:58 Primat bluetoothd[497]: Stopping SDP server
Aug 13 20:19:58 Primat bluetoothd[497]: Exit
Aug 13 20:20:10 Primat systemd[1]: Job dev-mapper-vg_Primat\x2dlv_Home.device/start timed out.
Aug 13 20:20:10 Primat systemd[1]: Job systemd-fsck@dev-mapper-vg_Primat\x2dlv_Home.service/start failed with result 'dependency'.
Aug 13 20:20:10 Primat systemd[1]: Job dev-mapper-vg_Primat\x2dlv_Home.device/start failed with result 'timeout'.
Aug 13 20:20:22 Primat systemd[1]: NetworkManager.service stopping timed out (2). Killing.
Aug 13 20:20:22 Primat systemd[1]: Unit NetworkManager.service entered failed state.
Aug 13 20:21:28 Primat systemd[1]: Job dev-mapper-swap.device/stop timed out.
Aug 13 20:21:28 Primat systemd[1]: Job dev-mapper-swap.device/stop failed with result 'timeout'.
Aug 13 20:21:28 Primat systemd[1]: Job dev-disk-by\x2duuid-cbbb92b0\x2d02cb\x2d46c4\x2d8051\x2defa98b0669c8.device/stop timed out.
Aug 13 20:21:28 Primat systemd[1]: Job dev-disk-by\x2duuid-cbbb92b0\x2d02cb\x2d46c4\x2d8051\x2defa98b0669c8.Your problem sounds similar to this one, except that they're using software raid rather than just pure LVM. If you're using an initrd, you may not have the appropriate modules installed. If you're not using an initrd, then the kernel probably needs LVM support compiled in (not as a module) and could be solved by fixing that. I have never used the ck-patchset, but this should give you an additional data point.
Also comment=systemd.automount will be deprecated soon as I understand it; if you have a need for automounting, x-systemd.automount should be used instead. -
[SOLVED]PulseAudio systemd daemon doesn't work
Hello.
I try to set PulseAudio as systemd service, but I'm still getting errors.
Here is how my .service file looks like.
$cat /usr/lib/systemd/system/[email protected]
[Unit]
Description=PulseAudio Sound System
Before=sound.target
[Service]
BusName=org.pulseaudio.Server
ExecStart=/usr/bin/pulseaudio --start
Restart=always
User=%1
[Install]
WantedBy=multi-user.target
And here is what I get (dan is my username):
$ systemctl start [email protected]
$ systemctl status [email protected]
[email protected] - PulseAudio Sound System
Loaded: loaded (/usr/lib/systemd/system/[email protected]; disabled)
Active: failed (Result: start-limit) since Mon 2013-09-16 11:42:46 CEST; 2s ago
Process: 1407 ExecStart=/usr/bin/pulseaudio --start (code=exited, status=217/USER)
Sep 16 11:42:45 530uarch systemd[1]: Failed to start PulseAudio Sound System.
Sep 16 11:42:45 530uarch systemd[1]: Unit [email protected] entered failed state.
Sep 16 11:42:46 530uarch systemd[1]: [email protected] holdoff time over, scheduling restart.
Sep 16 11:42:46 530uarch systemd[1]: Stopping PulseAudio Sound System...
Sep 16 11:42:46 530uarch systemd[1]: Starting PulseAudio Sound System...
Sep 16 11:42:46 530uarch systemd[1]: [email protected] start request repeated too quickly, refusing to start.
Sep 16 11:42:46 530uarch systemd[1]: Failed to start PulseAudio Sound System.
Sep 16 11:42:46 530uarch systemd[1]: Unit [email protected] entered failed state.
Thank you
Last edited by Kotrfa (2013-09-16 17:02:35)Ahhh. Thank you for that. I will add it to my awesome autostart script.
Solved
Last edited by Kotrfa (2013-09-16 17:03:20) -
[SOLVED]MPD, PulseAudio & Systemd/User
Since the advent of skype 4.3 I've had to switch to using pulseaudio. Things seems to be working fine except for the interaction between pulseaudio and mpd. My goal is to attain the same functionality as I had before when I was just using alsa. The main problem seems to be that the mpd daemon starts before pulseaudio. This means that when I reboot, for example, my music doesn't automatically keep playing. However if I toggle mpc (or open ncmpcpp and unpause) then it works fine.
What I have done
1) I installed mpd using the script found on the wiki
1a) copied ~/.config/mpd/mpd.conf to /etc/mpd.conf and uncomment #user line so it runs as my user
1b) enabled the mpd service with systemctl so it starts on boot, as directed to from 1)
2) Applied the workaround detailed here to make pulseaudio play nice with mpd
From what I can understand this results in the mpd daemon using the /etc/mpd.conf file which mirrors my local one (but I think the process is still started as root?)
If I don't do 2) then I get a problem where if I try to open pavucontrol I get an error saying I'm unable to connect and the system feels very unresponsive. Two second delays navigating around in thunar for example.
fuser /dev/snd/* outputs
» sudo fuser /dev/snd/*
/dev/snd/controlC0: 440
/dev/snd/controlC1: 440
/dev/snd/pcmC0D0p: 440m
» ps aux | grep 440
quiv 440 1.2 0.1 495964 13248 ? Sl 15:16 0:05 /usr/bin/pulseaudio --start --log-target=syslog
quiv 2259 0.0 0.0 11668 2296 pts/0 S+ 15:23 0:00 grep --color=auto 440
For now I have added in
if grep -q "state: pause" /home/quiv/.config/mpd/state; then
mpc toggle
fi
to my ~/.xinitrc as a work around to get pulse and mpd to work together properly. However it doesn't seem to work all the time. If I leave my music playing then when I reboot the system with reboot it seems that somtimes the state is being saved as paused, and other times as play. I suppose I could just mpc toggle without checking, but I don't want a situation where if I happen to not be playing music that every time I reboot my music starts playing.
Other things I have tried are;
A) not using pulseaudio with mpd.
B) not using systemd to manage mpd. Instead I manually started it in .xinitrc and pointed it to my ~/.config/mpd/mpd.conf file. I believe this means it runs as my own user instead of as root. When I did this I commented the username line and also undid 2) from above in ~/.config/mpd/mpd.conf
The problem with A) is that if I use alsa with mpd, mpd hogs my soundcard. My card becomes unselectable in pavucontrol and I cannot use it with pulseaudio., meanng no skype. The benefit of doing this (this is how I used to do it before I needed pulseaudio) is I have no problems with mpd's state being saved incorrectly.
The problem with B) is the mpdstate is saved incorrectly when for example I issue reboot. I can reproduce this by changing my currently played song then rebooting. When I boot back up mpd resumes playback from the previous session instead of recognizing the last thing I was playing. I had a search around on the forums and I found this issue which seems to describe what is happening. There doesn't seem to be a solution there instead a suggestion to user systemd (which I would like to do!) instead to manage mpd. Rasi's post details a unit file but I'm unsure what to do with this.
Looking at the wiki it seems like maybe I am supposed to provide this file so that it overwrites the default mpd.service unit. So I followed the steps listed there. First I created the directory /etc/systemd/system/mpd.d/ then made the user.conf file inside. I tried just putting the additional arguments in
[Service]
User=YOUR_USER
PAMName=system-local-login
I also remember trying to overwrite the entire [Service] section of the original by using
[Service]
User=YOUR_USER
PAMName=system-local-login
ExecStart=
ExecStart=/usr/bin/mpd --no-daemon
because I think just adding the addtional parameters might not have worked. But I'm not sure on this point, maybe both ways worked. This seemed to work but I had the same problem as above. The state was still being saved incorrectly sometimes when I rebooted. I would get a previous session instead of the most recent change. So I tried the other method for overwriting systemd unit files and made the file /etc/systemd/system/mpd.service in which I pasted Rasi's entire unit file. This also seemed to work, but still the incorrect state problem happened.
At this point I didn't know what to try. It seemed like the only option left was to set up mpd using a local configuration and setting up a systemd/User session and managing it that way. The wiki indiciated that if I did it this way I would not have to use the method 2) above. However I was/still am hesistant about doing this. I'm new to arch and the systemd/User wiki page seems very intimidating. I worry that I will create problems that I won't understand how to solve using this method just for the chance that mpd will function correclty with pulse. However I seemed to have exhausted all my possible options so I thought whatever I'll try it anyway! I'm certain I probably haven't done it right however.
So once again I turned to the wiki to help me with setting this up. However I can't make sense of the article. I don't know if I should follow ONLY the Setup since systemd 206 or if I should follow both setup sections? I decided to follow only the first section. I use no DE so I commented out the
[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec startx
line in my ~/.zprofile. When I set up my system I followed the Automatic login to virtual console. I left this file alone, but upon second thoughts maybe I should have disabled this too? I don't understand if using xlogin-git to austoart Xorg, as described in the systemd/User page, requires me to get rid of this too. I think xlogin-git just starts Xorg so automatic login via getty should be fine?
Immediately when I boot in using systemd to manage my session I notice that there are problems. I don't think my environment variables are being sourced from .zshenv because my panel fails to load. If I kill the panel and load it again it works. This makes me think there is something wrong with the order of units started with systemd.
» sudo journalctl --this-boot --no-pager | grep -i panel ~
Jul 05 16:25:39 lorelai bash[494]: /home/quiv/.config/bspwm/panel/panel: line 16: : No such file or directory
Jul 05 16:25:39 lorelai bash[494]: /home/quiv/.config/bspwm/panel/panel: line 17: : No such file or directory
Jul 05 16:25:39 lorelai bash[494]: /home/quiv/.config/bspwm/panel/panel: line 18: : No such file or directory
In each instance panel is trying to do things based on $PANEL_FIFO which is exported from ~/.zshenv but it doesn't appear to be set at the time systemd starts things up. Apart from these problems, which are probably undoubtedly due to the fact I failed to set up systemd/User properly, I still have problems with mpd. The state seems to be remembered correctly now, however when I reboot I still have to toggle mpc for it to start playback. It seems to be the same problem as when I use setup detailed intially. I suspect perhaps once again there is something wrong with the order here. MPD starts before pulse so it doesn't find anything to play through, then once I issue the mpc toggle command pulse is started and all is happy.
A final note is that I was getting this error yesterday when using systemd/User
● mpd.service - Music Player Daemon
Loaded: loaded (/usr/lib/systemd/system/mpd.service; enabled)
Active: inactive (dead)
Jul 05 03:11:41 lorelai pulseaudio[450]: [pulseaudio] module-jackdbus-detect.c: Unable to contact D-Bus session bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
Jul 05 03:11:41 lorelai pulseaudio[450]: [pulseaudio] module.c: Failed to load module "module-jackdbus-detect" (argument: "channels=2"): initialization failed.
Jul 05 03:11:41 lorelai pulseaudio[450]: [pulseaudio] main.c: Module load failed.
Jul 05 03:13:35 lorelai systemd[1]: Stopping Music Player Daemon...
Jul 05 03:13:35 lorelai systemd[1]: Stopped Music Player Daemon.
but it doesn't seem to happen anymore.
Also I have no idea if I'm even supposed to use it like this but
» sudo systemctl --user enable mpd ~
Failed to get D-Bus connection: Connection refused
I tried this because I was wondering if mpd was even using the correct service when using systemd/User. I thought perhaps it just was using the one in /etc/systemd/system/ instead of /usr/lib/systemd/user/. I'm still not sure about this.
In the end I've exhausted whatever I can think of. I'm sure I've done a lot of things wrong but I tried my best. Hopefully somebody knows what I've done wrong and can help me.
~/.config/mpd/mpd.conf
# An example configuration file for MPD.
# Read the user manual for documentation: http://www.musicpd.org/doc/user/
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "~/Music"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "~/.config/mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "~/.config/mpd/database"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
log_file "~/.config/mpd/log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
pid_file "~/.config/mpd/pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
state_file "~/.config/mpd/state"
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
sticker_file "~/.config/mpd/sticker.sql"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
#user "quiv"
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
#group "nogroup"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
bind_to_address "127.0.0.1"
# And for Unix Socket
bind_to_address "~/.config/mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
gapless_mp3_playback "yes"
# Setting "restore_paused" to "yes" puts MPD into pause mode instead
# of starting playback after startup.
#restore_paused "no"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. The complete list of possible values can be
# found in the mpd.conf man page.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# This setting enables automatic update of MPD's database when files in
# music_directory are changed.
auto_update "yes"
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself. There is no limit by default.
auto_update_depth "3"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Database #######################################################################
#database {
# plugin "proxy"
# host "other.mpd.host"
# port "6600"
# Input #######################################################################
input {
plugin "curl"
proxy "proxy.isp.com:8080"
proxy_user "user"
proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# An example of an ALSA output:
#audio_output {
# type "alsa"
# name "My ALSA Device"
## device "hw:0,0" # optional
## mixer_type "hardware" # optional
## mixer_device "default" # optional
## mixer_control "PCM" # optional
## mixer_index "0" # optional
audio_output {
type "pulse"
name "pulse audio"
format "48000:16:2"
## server "127.0.0.1"
## sink "remote_server_sink" # optional
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## mixer_type "hardware" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## url "http://example.com" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
## mixer_type "software" # optional
# An example of a recorder output:
#audio_output {
# type "recorder"
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
# path "/var/lib/mpd/recorder/mpd.ogg"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# max_clients "0" # optional 0=no limit
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
# An example of a winmm output (Windows multimedia API).
#audio_output {
# type "winmm"
# name "My WinMM output"
## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
# or
## device "0" # optional
## mixer_type "hardware" # optional
# An example of an openal output.
#audio_output {
# type "openal"
# name "My OpenAL output"
## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# mixer_type "none" # optional
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album", "track" or "auto". "auto" is a special mode that
# chooses between "track" and "album" depending on the current state of
# random playback. If random playback is enabled then "track" mode is used.
# See <http://www.replaygain.org> for more details about ReplayGain.
# This setting is off by default.
replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
replaygain_preamp "0"
# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
# By default this setting is disabled.
#replaygain_missing_preamp "0"
# This setting enables or disables ReplayGain limiting.
# MPD calculates actual amplification based on the ReplayGain tags
# and replaygain_preamp / replaygain_missing_preamp setting.
# If replaygain_limit is enabled MPD will never amplify audio signal
# above its original level. If replaygain_limit is disabled such amplification
# might occur. By default this setting is enabled.
#replaygain_limit "yes"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "4096"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
#filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
# SIDPlay decoder #############################################################
# songlength_database:
# Location of your songlengths file, as distributed with the HVSC.
# The sidplay plugin checks this for matching MD5 fingerprints.
# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
# default_songlength:
# This is the default playing time in seconds for songs not in the
# songlength database, or in case you're not using a database.
# A value of 0 means play indefinitely.
# filter:
# Turns the SID filter emulation on or off.
#decoder {
# plugin "sidplay"
# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
# default_songlength "120"
# filter "true"
/etc/mpd.config
# An example configuration file for MPD.
# Read the user manual for documentation: http://www.musicpd.org/doc/user/
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "~/Music"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "~/.config/mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "~/.config/mpd/database"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
log_file "~/.config/mpd/log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
pid_file "~/.config/mpd/pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
state_file "~/.config/mpd/state"
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
sticker_file "~/.config/mpd/sticker.sql"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "quiv"
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
#group "nogroup"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
bind_to_address "127.0.0.1"
# And for Unix Socket
bind_to_address "~/.config/mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
gapless_mp3_playback "yes"
# Setting "restore_paused" to "yes" puts MPD into pause mode instead
# of starting playback after startup.
#restore_paused "no"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. The complete list of possible values can be
# found in the mpd.conf man page.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# This setting enables automatic update of MPD's database when files in
# music_directory are changed.
auto_update "yes"
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself. There is no limit by default.
auto_update_depth "3"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Database #######################################################################
#database {
# plugin "proxy"
# host "other.mpd.host"
# port "6600"
# Input #######################################################################
input {
plugin "curl"
proxy "proxy.isp.com:8080"
proxy_user "user"
proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# An example of an ALSA output:
#audio_output {
# type "alsa"
# name "My ALSA Device"
## device "hw:0,0" # optional
## mixer_type "hardware" # optional
## mixer_device "default" # optional
## mixer_control "PCM" # optional
## mixer_index "0" # optional
audio_output {
type "pulse"
name "pulse audio"
format "48000:16:2"
server "127.0.0.1"
## sink "remote_server_sink" # optional
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## mixer_type "hardware" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## url "http://example.com" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
## mixer_type "software" # optional
# An example of a recorder output:
#audio_output {
# type "recorder"
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
# path "/var/lib/mpd/recorder/mpd.ogg"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# max_clients "0" # optional 0=no limit
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
# An example of a winmm output (Windows multimedia API).
#audio_output {
# type "winmm"
# name "My WinMM output"
## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
# or
## device "0" # optional
## mixer_type "hardware" # optional
# An example of an openal output.
#audio_output {
# type "openal"
# name "My OpenAL output"
## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# mixer_type "none" # optional
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album", "track" or "auto". "auto" is a special mode that
# chooses between "track" and "album" depending on the current state of
# random playback. If random playback is enabled then "track" mode is used.
# See <http://www.replaygain.org> for more details about ReplayGain.
# This setting is off by default.
replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
replaygain_preamp "0"
# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
# By default this setting is disabled.
#replaygain_missing_preamp "0"
# This setting enables or disables ReplayGain limiting.
# MPD calculates actual amplification based on the ReplayGain tags
# and replaygain_preamp / replaygain_missing_preamp setting.
# If replaygain_limit is enabled MPD will never amplify audio signal
# above its original level. If replaygain_limit is disabled such amplification
# might occur. By default this setting is enabled.
#replaygain_limit "yes"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "4096"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
#filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
# SIDPlay decoder #############################################################
# songlength_database:
# Location of your songlengths file, as distributed with the HVSC.
# The sidplay plugin checks this for matching MD5 fingerprints.
# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
# default_songlength:
# This is the default playing time in seconds for songs not in the
# songlength database, or in case you're not using a database.
# A value of 0 means play indefinitely.
# filter:
# Turns the SID filter emulation on or off.
#decoder {
# plugin "sidplay"
# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
# default_songlength "120"
# filter "true"
/etc/X11/xinit/xinitrc.d/pulseaudio [not sure if I even need this?]
#!/bin/bash
case "$DESKTOP_SESSION" in
gnome|kde*|xfce*) # PulseAudio is started via XDG Autostart
# Extra checks in case DESKTOP_SESSION is not set correctly
if [[ -z $KDE_FULL_SESSION && -z $GNOME_DESKTOP_SESSION_ID ]]; then
/usr/bin/start-pulseaudio-x11
fi
esac
/etc/pulse/daemon.conf
# This file is part of PulseAudio.
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
exit-idle-time=0
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
log-level = error
; log-meta = no
; log-time = no
; log-backtrace = 0
resample-method = speex-float-7
; enable-remixing = yes
; enable-lfe-remixing = no
flat-volumes = no
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 1000000
default-sample-format = s24le
default-sample-rate = 48000
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
default-fragments = 2
default-fragment-size-msec = 76
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
/etc/pulse/default.pa
#!/usr/bin/pulseaudio -nF
# This file is part of PulseAudio.
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.nofail
### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
#.ifexists module-bluetooth-policy.so
#load-module module-bluetooth-policy
#.endif
#.ifexists module-bluetooth-discover.so
#load-module module-bluetooth-discover
#.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.
### Load X11 bell module
#load-module module-x11-bell sample=bell-windowing-system
### Register ourselves in the X11 session manager
#load-module module-x11-xsmp
### Publish connection data in the X11 root window
#.ifexists module-x11-publish.so
#.nofail
#load-module module-x11-publish
#.fail
#.endif
### Make some devices default
#set-default-sink output
#set-default-source input
~/.xinitrc [currently using daemon mpd]
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
#if grep -q "state: pause" /home/quiv/.config/mpd/state; then
# mpc toggle
#fi
#mpd ~/.config/mpd/mpd.conf
~/.config/bspwm/panel/notify_mpd
xrdb ~/.Xresources
xset +fp ~/.fonts
xset +fp /usr/share/fonts/misc
xset fp rehash
xsetroot -cursor_name left_ptr &
# imlibsetroot -x e -s f /home/quiv/Pictures/bloom_one_desktop.jpg
sh ~/.fehbg &
compton -CGb --backend glx --paint-on-overlay --vsync opengl-swc &
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
sxhkd &
exec bspwm
~/.zprofile [currently trying to use systemd/User]
#[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec startx
EDIT:A small update; it seems I don't need to have /etc/systemd/system/[email protected]/autologin.conf when using systemd to manag my user session as I removed it and I'm both automatically logged on and in X-session.
Last edited by quiv (2014-07-05 13:40:30)o_caino wrote:
Setting mpd as a systemd user service is very simple. This is what I did.
In ~/.config/systemd/user/mpd.service
[Unit]
Description=Music Player Daemon
After=network.target sound.target
[Service]
ExecStart=/usr/bin/mpd --no-daemon
ExecStop=/usr/bin/mpd --kill
[Install]
WantedBy=default.target
To enable
systemctl --user enable mpd
Done.
Well shit. I guess I didn't need to do all that other stuff. I only wish I'd known about this before wasting most of my day. Thank you very much, everything appears to be working flawlessly now. -
Pulseaudio and systemd --user: DBus scope issues?
Hi,
I have a multi-seat setup, so I need user-wide pulseaudio and whatnot. I'm trying to setup my boot through systemd --user.
Testing audio working apps are firefox, mpv, and mpd. The problem is:
- If I start pulseaudio and mpd manually everything is fine (no use of systemd)
- If I start pulseaudio through systemd no application has sound.
- If I start pulseaudio and mpd through systemd only mpd has sound.
raimundoyamtech~$ cat .config/systemd/user/pulseaudio.service
[Unit]
Description=PulseAudio Sound System
After=sound.target
[Service]
ExecStart=/usr/bin/pulseaudio
[Install]
WantedBy=multi-user.target
raimundoyamtech~$ cat .config/systemd/user/mpd.service
[Unit]
Description=Music Player Daemon
After=network.target sound.target
[Service]
ExecStart=/usr/bin/mpd %h/.config/mpd/mpd.conf --no-daemon
ExecStop=/usr/bin/mpd %h/.config/mpd/mpd.conf --kill
Restart=always
[Install]
WantedBy=multi-user.target
If I add BusName=org.pulseaudio.Server to the pulseaudio.service nothing changes.
Using pulseaudio's autospawn=yes leads to what seems to be same behaviour: mpd by systemd starts pulseaudio and is the only app with sound.
./config/pulse/client.conf only contains default-sink. Everything else is default.
Using alsa alone is not an option because of firefox.
Any thoughts?
EDIT:
raimundoyamtech~$ systemctl --version
systemd 208
+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ
raimundoyamtech~$ pulseaudio --version
pulseaudio 4.0
Last edited by Raimundo (2013-10-23 10:08:13)ewaller wrote:
Please do not bump. I understand the frustration; really, I do. But, these are very active forums with some very good technical people lurking about. I guarantee your post had been read. I read it. I did not have an answer, as I have never seen that behavior afore. I am certain that was true for many other regulars.
In the future, you can bring focus to a thread by providing more information.. Tell us what you have tried, what you have read since the last post, etc. At least it gives the impression that you are working the problem rather than merely waiting for a response.
I don't know almost anything about systemd, especially because it changes so rapidly and documention is so scarce and outdated that either I read the whole documentantion for my version in hopes of finding my problem (something for which I do not have time) or post a topic.
I posted everything I touched regarding systemd since the installation of my system, that's all the relevant information I know I can give, so at this point I had no more info to give.
Actually posting a topic is really my last resort, it usually means that I have already tried everything I knew and I'm hopeless already.
raimundoyamtech~$ loginctl list-sessions
SESSION UID USER SEAT
2 1002 carla seat0
1 1000 raimundo seat0
2 sessions listed.
raimundoyamtech~$ loginctl show-session 1
Id=1
Timestamp=Tue 2013-10-29 12:33:47 WET
TimestampMonotonic=6670234
VTNr=1
TTY=tty1
Remote=no
Service=login
Scope=session-1.scope
Leader=1456
Audit=1
Type=tty
Class=user
Active=no <----- Is this what you are talking about?
State=online
IdleHint=yes
IdleSinceHint=1383050072367636
IdleSinceHintMonotonic=0
Name=raimundo
raimundoyamtech~$ loginctl show-session 2
Id=2
Timestamp=Tue 2013-10-29 12:33:47 WET
TimestampMonotonic=6667439
VTNr=2
TTY=tty2
Remote=no
Service=login
Scope=session-2.scope
Leader=1453
Audit=2
Type=tty
Class=user
Active=no <----- Is this what you are talking about?
State=online
IdleHint=yes
IdleSinceHint=1383050025387636
IdleSinceHintMonotonic=0
Name=carla
raimundoyamtech~$ loginctl show-session 3
Failed to issue method call: No such file or directory
What is an active session? Oo Never heard of it
I could start things. Pulseaudio started, so did mpd. I also have a /usr/lib/systemd/systemd --user process started for each user. I assumed this would be it since this
raimundoyamtech~$ systemctl --user
Failed to issue method call: Process /bin/false exited with status 1
always happens and I've read that systemctl --user is no longer required.
[EDIT]
Fixed it. Don't remember where I read that it wasn't required, just that it was in the same place I found someone else complaining about getting this error.
For anyone else encountering this: sed -i s/system-auth/system-login/g /etc/pam.d/systemd-user
and systemctl --user will work. Insults fly out to the one who wrote it wasn't required!
Still am not able to get an active session though
[/EDIT]
Why would there be a need for anything else? I'm gonna check on that. Thanks!
See, the bump worked ^^ but ok I'll try to refrain from doing that next time. Sorry.
Last edited by Raimundo (2013-10-29 16:27:55) -
How to restart pulseaudio via systemd?
As my sound is not working well after hibernation, I tried to use systemd to kill pulseaudio while my pc fall asleep and to start it when my pc wakes up. But I can't do this. Following the archwiki, I made to .service files:
root:/etc/systemd/system# cat [email protected]
[Unit]
Description=User suspend actions
Before=sleep.target
[Service]
User=%I
Environment=DISPLAY=:0
Type=oneshot
ExecStart= /usr/bin/pulseaudio -k
ExecStart= /usr/bin/xscreensaver-command --lock
[Install]
WantedBy=sleep.target
and
root:/etc/systemd/system# cat [email protected]
[Unit]
Description=User resume actions
After=suspend.target
[Service]
User=%I
Environment=DISPLAY=:0
Type=oneshot
ExecStart= /usr/bin/start-pulseaudio-x11
[Install]
WantedBy=suspend.target
Next, I enabled them:
root:/etc/systemd/system# systemctl enable [email protected]
ln -s '/etc/systemd/system/[email protected]' '/etc/systemd/system/suspend.target.wants/[email protected]'
root:/etc/systemd/system# systemctl enable [email protected]
ln -s '/etc/systemd/system/[email protected]' '/etc/systemd/system/sleep.target.wants/[email protected]'
I rebooted the system, but this doesn't work. This is what I got when I had started the suspend service.
root:/etc/systemd/system# systemctl start [email protected]
Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl -xn' for details.
root:/etc/systemd/system# systemctl status [email protected]
[email protected] - User suspend actions
Loaded: loaded (/etc/systemd/system/[email protected]; enabled)
Active: failed (Result: exit-code) since Tue 2013-04-30 23:09:08 CEST; 14s ago
Process: 5186 ExecStart=/usr/bin/pulseaudio -k (code=exited, status=1/FAILURE)
Apr 30 23:09:08 morfina pulseaudio[5186]: E: [pulseaudio] main.c: Failed to kill daemon: No such process
Apr 30 23:09:08 morfina systemd[1]: [email protected]: main process exited, code=exited, status=1/FAILURE
Apr 30 23:09:08 morfina systemd[1]: Failed to start User suspend actions.
Apr 30 23:09:08 morfina systemd[1]: MESSAGE=Unit [email protected] entered failed state.
root:/etc/systemd/system# journalctl -xn
-- Logs begin at Sun 2013-04-28 00:14:17 CEST, end at Tue 2013-04-30 23:09:08 CEST. --
Apr 30 23:09:08 morfina systemd[1]: Starting User suspend actions...
-- Subject: Unit [email protected] has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit [email protected] has begun starting up.
Apr 30 23:09:08 morfina pulseaudio[5186]: E: [pulseaudio] main.c: Failed to kill daemon: No such process
Apr 30 23:09:08 morfina systemd[1]: [email protected]: main process exited, code=exited, status=1/FAILURE
Apr 30 23:09:08 morfina systemd[1]: Failed to start User suspend actions.
-- Subject: Unit [email protected] has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/be02cf6855d2428ba40df7e9d022f03d
-- Unit [email protected] has failed.
-- The result is failed.
Apr 30 23:09:08 morfina systemd[1]: MESSAGE=Unit [email protected] entered failed state.
The most important part:
pulseaudio[5186]: E: [pulseaudio] main.c: Failed to kill daemon: No such process
I don't know why this happens. Pulse demon exists, but systemd cannot kill it because it thinks there is no such process.
root:/etc/systemd/system# ps -eo "user args" | grep pulse
morfik /usr/bin/pulseaudio --start
morfik /usr/lib/pulse/gconf-helper
root grep --color=auto pulse
I can kill pulse in terminal as normal user though.
morfik:~$ /usr/bin/pulseaudio -k
root:/etc/systemd/system# ps -eo "user args" | grep pulse
root grep --color=auto pulse
The same with [email protected]
root:/etc/systemd/system# systemctl start [email protected]
root:/etc/systemd/system# systemctl status [email protected]
[email protected] - User resume actions
Loaded: loaded (/etc/systemd/system/[email protected]; enabled)
Active: inactive (dead) since Tue 2013-04-30 23:32:09 CEST; 2s ago
Process: 7183 ExecStart=/usr/bin/start-pulseaudio-x11 (code=exited, status=0/SUCCESS)
Apr 30 23:32:06 morfina systemd[1]: Starting User resume actions...
Apr 30 23:32:06 morfina pulseaudio[7187]: [pulseaudio] sink.c: Default and alternate sample rates are the same.
Apr 30 23:32:06 morfina pulseaudio[7187]: [pulseaudio] source.c: Default and alternate sample rates are the same.
Apr 30 23:32:09 morfina systemd[1]: Started User resume actions.
But there is no such process.
I tried to start pulse demon using:
/usr/bin/pulseaudio -D
/usr/bin/pulseaudio --start
/usr/bin/start-pulseaudio-x11
and everything goes smooth while I'm doing it as a normal user in a terminal, but when I try to put it into systemd service file, everything starts to break.OK, I'm a bit further and got a error message now:
In /etc/systemd/system/[email protected] I start the script /home/carl/scripts/reload-sys-mon.sh
but that leads to the following error message:
$ sudo systemctl status resume@carl
[email protected] - User resume actions
Loaded: loaded (/etc/systemd/system/[email protected]; enabled)
Active: deactivating (stop-sigterm) since Do 2013-06-20 10:53:08 CEST; 571ms ago
Process: 1548 ExecStart=/usr/bin/sh -c /home/carl/scripts/reload-sys-mon.sh (code=exited, status=0/SUCCESS)
CGroup: name=systemd:/system/[email protected]/[email protected]
└─1554 dbus-launch --autolaunch=0b13b59cd91045ad9b746f7b36da8550 --binary-syntax --close-stderr
Jun 20 10:53:05 cookbook systemd[1]: Starting User resume actions...
Jun 20 10:53:05 cookbook systemd[1]: Started User resume actions.
Jun 20 10:53:08 cookbook sh[1548]: Error: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.Shell was not provided by any service files
So the problem is some kind of strange dbus problem: If I execute my reload-sys-mon.sh script directly, it works without problem!
But if systemd calls it, it gives me the error above.
Why?
Reference: the reload-sys-mon.sh script:
#!/bin/bash
sleep 10s && gdbus call --session --dest org.gnome.Shell --object-path /org/gnome/Shell --method org.gnome.Shell.Extensions.ReloadExtension [email protected]
exit 0
And indeed, in /usr/share/dbus-1/services there is no service file for org.gnome.Shell.
Looking at the other files there, making such a file seems not so hard (just 3 lines, e.g. [D-BUS Service] Name=org.freedesktop.ColorHelper Exec=/usr/lib/colord/colord-session), but I don't know what to put in the "Exec=" line. I tried Exec=/usr/bin/gnome-shell, but that didn't work.
So does anyone know how to create such a service file for org.gnome.Shell?
Last edited by Carl Karl (2013-06-20 10:30:22) -
Bluetooth audio sink no longer available in PulseAudio after systemd
I've done a long overdue and mostly smooth update to systemd, but I can't get PA to use my Bluetooth speakers anymore. I followed the instructions on https://wiki.archlinux.org/index.php/Systemd and removed myself from all groups other than users.
Bluetooth itself seems to be working fine, I was able to re-pair and connect to the audio sink, but it doesn't show up as an output in pavucontrol. The device name does show up in the Configuration tab of pavucontrol, with the option to switch between A2DP and Off profiles, but fiddling with that doesn't do anything either. What did I break?
Edit: nothing shows up for the bluetooth device in /dev/snd either.
Last edited by fivre (2013-01-21 20:01:47)Try shutting down your Mac and then unplugging it (completely) for about 30 seconds. Then plug it in and power it back up.
This does what's called an "SMC reset" and will often resolve issues around AirPort and Bluetooth hardware of this nature. -
[solved] No sound, ALSA finds soundcard, pulseaudio does not.
Problem:
pulseaudio can't find my soundcard (or it can't find ALSA, not sure). It falls back to a dummy-output and no input so i can't play sounds or use my mic.
First appeared when:
Installing software updates like a month ago. I ignored it at first in the hopes it will resolve itself with the next update an few dates later. It didn't so far. None of the packets I updated had linux|pulse|alsa|sound|audio in its name. So i guess it just triggered the problem in a indirect way.
What did not help:
Reinstalling packets with pulse|alsa|sound|audio in its name.
Deleting ${HOME}/.pulse* .
Rebooting.
Resetting /etc/pulse/* or /etc/asound.conf to the defaults of the packaes they come with.
Adding or removing my user to the audio group.
Googling. Other threads i this forum.
Additional infos:
(Stuff that was requested from others which had similar problems. No other [solved]-threads were helping me so far.)
/dev/dsp does not exist.
fuser -v /dev/snd/* returns nothing
aplay whatever.wav produces no sound.
aplay -D sysdefault whatever.wav works.
Using Gnome 3 started with gdm.
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=Intel
HDA Intel, ALC272 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=Intel,DEV=0
HDA Intel, HDMI 0
HDMI Audio Output
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sun Nov 18 10:11:22 CET 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux cryptdevice=/dev/sda7:root root=/dev/mapper/root ro quiet init=/bin/systemd
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b76a0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b76a1000-0x00000000b76a6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b76a7000-0x00000000b77d1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b77d2000-0x00000000b780efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b780f000-0x00000000b7908fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7909000-0x00000000b7b0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b7b0f000-0x00000000b7b18fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7b19000-0x00000000b7b1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b7b1f000-0x00000000b7b62fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7b63000-0x00000000b7b9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b7b9f000-0x00000000b7be4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7be5000-0x00000000b7bfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b7bff000-0x00000000b7bfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7c00000-0x00000000b7dfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b8000000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Dell Inc. Inspiron 1370/0R8PR3, BIOS A01 09/15/2009
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0xb7c00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0FFE40000 mask FFFFC0000 write-protect
[ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f6bf0-0x000f6bff] mapped at [ffff8800000f6bf0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xb7bfffff]
[ 0.000000] [mem 0x00000000-0xb7bfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xb7bfffff @ [mem 0x1fffc000-0x1fffffff]
[ 0.000000] RAMDISK: [mem 0x376e2000-0x37b68fff]
[ 0.000000] ACPI: RSDP 00000000000f6b10 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000b7bf7369 00064 (v01 DELL CL09 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000b7be7000 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000b7be8000 077A9 (v02 Dell CANTIGA 06040000 INTL 20060608)
[ 0.000000] ACPI: FACS 00000000b7b9efc0 00040
[ 0.000000] ACPI: HPET 00000000b7bfed16 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000b7bfed4e 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: OSFR 00000000b7bfed8a 00070 (v01 DELL DELL 06040000 ASL 00000061)
[ 0.000000] ACPI: APIC 00000000b7bfedfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000b7bfee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000b7bfee8a 00176 (v01 DELL CL09 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 00000000b7be6000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000b7bfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0xb7bfffff]
[ 0.000000] NODE_DATA [mem 0xb7be1000-0xb7be4fff]
[ 0.000000] [ffffea0000000000-ffffea0002dfffff] PMD -> [ffff8800b4000000-ffff8800b6dfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xb76a0fff]
[ 0.000000] node 0: [mem 0xb76a7000-0xb77d1fff]
[ 0.000000] node 0: [mem 0xb780f000-0xb7908fff]
[ 0.000000] node 0: [mem 0xb7b0f000-0xb7b18fff]
[ 0.000000] node 0: [mem 0xb7b1f000-0xb7b62fff]
[ 0.000000] node 0: [mem 0xb7b9f000-0xb7be4fff]
[ 0.000000] node 0: [mem 0xb7bff000-0xb7bfffff]
[ 0.000000] On node 0 totalpages: 751850
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11696 pages used for memmap
[ 0.000000] DMA32 zone: 736171 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000d8000
[ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b76a1000 - 00000000b76a7000
[ 0.000000] PM: Registered nosave memory: 00000000b77d2000 - 00000000b780f000
[ 0.000000] PM: Registered nosave memory: 00000000b7909000 - 00000000b7b0f000
[ 0.000000] PM: Registered nosave memory: 00000000b7b19000 - 00000000b7b1f000
[ 0.000000] PM: Registered nosave memory: 00000000b7b63000 - 00000000b7b9f000
[ 0.000000] PM: Registered nosave memory: 00000000b7be5000 - 00000000b7bff000
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800b7400000 s84608 r8192 d21888 u1048576
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 740084
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux cryptdevice=/dev/sda7:root root=/dev/mapper/root ro quiet init=/bin/systemd
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2944188k/3010560k available (4727k kernel code, 3160k absent, 63212k reserved, 4143k data, 772k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 12058624 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1296.696 MHz processor
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.45 BogoMIPS (lpj=4322320)
[ 0.003343] pid_max: default: 32768 minimum: 301
[ 0.003400] Security Framework initialized
[ 0.003407] AppArmor: AppArmor disabled by boot time parameter
[ 0.003948] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006850] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008132] Mount-cache hash table entries: 256
[ 0.008498] Initializing cgroup subsys cpuacct
[ 0.008503] Initializing cgroup subsys memory
[ 0.008517] Initializing cgroup subsys devices
[ 0.008520] Initializing cgroup subsys freezer
[ 0.008522] Initializing cgroup subsys net_cls
[ 0.008525] Initializing cgroup subsys blkio
[ 0.008570] CPU: Physical Processor ID: 0
[ 0.008572] CPU: Processor Core ID: 0
[ 0.008575] mce: CPU supports 6 MCE banks
[ 0.008587] CPU0: Thermal monitoring enabled (TM2)
[ 0.008592] process: using mwait in idle threads
[ 0.008600] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift is 0xffffffff
[ 0.010851] ACPI: Core revision 20120711
[ 0.016699] ftrace: allocating 18348 entries in 72 pages
[ 0.027201] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061706] smpboot: CPU0: Genuine Intel(R) CPU U7300 @ 1.30GHz stepping 0a
[ 0.063329] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.063329] ... version: 2
[ 0.063329] ... bit width: 40
[ 0.063329] ... generic registers: 2
[ 0.063329] ... value mask: 000000ffffffffff
[ 0.063329] ... max period: 000000007fffffff
[ 0.063329] ... fixed-purpose events: 3
[ 0.063329] ... event mask: 0000000700000003
[ 0.086782] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.100007] smpboot: Booting Node 0, Processors #1 OK
[ 0.113162] Brought up 2 CPUs
[ 0.113162] smpboot: Total of 2 processors activated (5188.90 BogoMIPS)
[ 0.113436] devtmpfs: initialized
[ 0.116686] PM: Registering ACPI NVS region [mem 0xb7b63000-0xb7b9efff] (245760 bytes)
[ 0.121465] NET: Registered protocol family 16
[ 0.121699] ACPI: bus type pci registered
[ 0.121824] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.121828] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.174683] PCI: Using configuration type 1 for base access
[ 0.175619] bio: create slab <bio-0> at 0
[ 0.175619] ACPI: Added _OSI(Module Device)
[ 0.175619] ACPI: Added _OSI(Processor Device)
[ 0.175619] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.175619] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.178073] ACPI: EC: Look up EC in DSDT
[ 0.182902] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.188123] ACPI: SSDT 00000000b7b1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.188671] ACPI: Dynamic OEM Table Load:
[ 0.188676] ACPI: SSDT (null) 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.188875] ACPI: SSDT 00000000b7b19620 00568 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.189399] ACPI: Dynamic OEM Table Load:
[ 0.189404] ACPI: SSDT (null) 00568 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.189425] ACPI: SSDT 00000000b7b1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.190407] ACPI: Dynamic OEM Table Load:
[ 0.190412] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.190429] ACPI: SSDT 00000000b7b1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.190693] ACPI: Dynamic OEM Table Load:
[ 0.190698] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.190715] ACPI: Interpreter enabled
[ 0.190715] ACPI: (supports S0 S3 S4 S5)
[ 0.190715] ACPI: Using IOAPIC for interrupt routing
[ 0.323314] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.323314] ACPI: No dock devices found.
[ 0.323314] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.323314] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.323314] PCI host bridge to bus 0000:00
[ 0.323314] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[ 0.323314] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.323314] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.323314] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.323314] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.323314] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.323314] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.323314] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.323314] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.323314] DMAR: Forcing write-buffer flush capability
[ 0.323314] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.323314] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.323314] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.323314] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.323314] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.323314] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.323314] pci 0000:00:02.1: reg 10: [mem 0xf0400000-0xf04fffff 64bit]
[ 0.323314] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.323314] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f]
[ 0.323314] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.323314] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f]
[ 0.323314] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.323314] pci 0000:00:1a.2: reg 20: [io 0x1860-0x187f]
[ 0.323314] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.323314] pci 0000:00:1a.7: reg 10: [mem 0xf0804800-0xf0804bff]
[ 0.323314] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.323314] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.323314] pci 0000:00:1b.0: reg 10: [mem 0xf0800000-0xf0803fff 64bit]
[ 0.323314] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.323342] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.323470] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.323513] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.323640] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.323688] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.323816] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.323860] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.323931] pci 0000:00:1d.0: reg 20: [io 0x1880-0x189f]
[ 0.324017] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.324087] pci 0000:00:1d.1: reg 20: [io 0x18a0-0x18bf]
[ 0.324173] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.324243] pci 0000:00:1d.2: reg 20: [io 0x18c0-0x18df]
[ 0.324346] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.324379] pci 0000:00:1d.7: reg 10: [mem 0xf0804c00-0xf0804fff]
[ 0.324516] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.324552] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.324666] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.324866] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.324900] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
[ 0.324915] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
[ 0.324931] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
[ 0.324946] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
[ 0.324960] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
[ 0.324975] pci 0000:00:1f.2: reg 24: [mem 0xf0804000-0xf08047ff]
[ 0.325062] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.325096] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.325123] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
[ 0.325160] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
[ 0.325277] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
[ 0.325283] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.325366] pci_bus 0000:08: busn_res: [bus 08] is inserted under [bus 00-ff]
[ 0.325632] pci 0000:08:00.0: [14e4:4315] type 00 class 0x028000
[ 0.325707] pci 0000:08:00.0: reg 10: [mem 0xf0500000-0xf0503fff 64bit]
[ 0.326109] pci 0000:08:00.0: supports D1 D2
[ 0.326112] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.326304] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.326314] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.326391] pci_bus 0000:20: busn_res: [bus 20] is inserted under [bus 00-ff]
[ 0.326477] pci 0000:20:00.0: [10ec:8168] type 00 class 0x020000
[ 0.326546] pci 0000:20:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.326670] pci 0000:20:00.0: reg 18: [mem 0xf0904000-0xf0904fff 64bit pref]
[ 0.326745] pci 0000:20:00.0: reg 20: [mem 0xf0900000-0xf0903fff 64bit pref]
[ 0.326794] pci 0000:20:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.327093] pci 0000:20:00.0: supports D1 D2
[ 0.327096] pci 0000:20:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.327302] pci 0000:00:1c.5: PCI bridge to [bus 20]
[ 0.327309] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.327323] pci 0000:00:1c.5: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
[ 0.327363] pci_bus 0000:26: busn_res: [bus 26] is inserted under [bus 00-ff]
[ 0.327435] pci 0000:00:1e.0: PCI bridge to [bus 26] (subtractive decode)
[ 0.327452] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.327456] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.327460] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.327463] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.327467] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.327471] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.327505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.327638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.327717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.327766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.327824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.327883] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.327886] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.334993] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.335069] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.335141] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.335212] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.335283] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.335355] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.335424] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.335495] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.336671] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.336689] vgaarb: loaded
[ 0.336691] vgaarb: bridge control possible 0000:00:02.0
[ 0.336769] PCI: Using ACPI for IRQ routing
[ 0.348092] PCI: pci_cache_line_size set to 64 bytes
[ 0.348605] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.348608] e820: reserve RAM buffer [mem 0xb76a1000-0xb7ffffff]
[ 0.348614] e820: reserve RAM buffer [mem 0xb77d2000-0xb7ffffff]
[ 0.348619] e820: reserve RAM buffer [mem 0xb7909000-0xb7ffffff]
[ 0.348623] e820: reserve RAM buffer [mem 0xb7b19000-0xb7ffffff]
[ 0.348627] e820: reserve RAM buffer [mem 0xb7b63000-0xb7ffffff]
[ 0.348631] e820: reserve RAM buffer [mem 0xb7be5000-0xb7ffffff]
[ 0.348634] e820: reserve RAM buffer [mem 0xb7c00000-0xb7ffffff]
[ 0.348791] NetLabel: Initializing
[ 0.348794] NetLabel: domain hash size = 128
[ 0.348796] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.348816] NetLabel: unlabeled traffic allowed by default
[ 0.348840] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.348847] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.348855] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.370000] Switching to clocksource hpet
[ 0.381464] pnp: PnP ACPI init
[ 0.381496] ACPI: bus type pnp registered
[ 0.382022] pnp 00:00: [bus 00-ff]
[ 0.382027] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.382031] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.382035] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.382039] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.382042] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.382046] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.382050] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.382053] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.382057] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.382060] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.382064] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.382067] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.382071] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.382075] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.382078] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.382086] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.382089] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.382093] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[ 0.382097] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.382100] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.382200] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.440057] pnp 00:01: [io 0x0000-0x001f]
[ 0.440061] pnp 00:01: [io 0x0081-0x0091]
[ 0.440065] pnp 00:01: [io 0x0093-0x009f]
[ 0.440068] pnp 00:01: [io 0x00c0-0x00df]
[ 0.440072] pnp 00:01: [dma 4]
[ 0.440121] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.440232] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.440329] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.440336] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.440353] pnp 00:03: [io 0x00f0]
[ 0.440369] pnp 00:03: [irq 13]
[ 0.440414] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.440433] pnp 00:04: [io 0x002e-0x002f]
[ 0.440436] pnp 00:04: [io 0x0061]
[ 0.440439] pnp 00:04: [io 0x0063]
[ 0.440443] pnp 00:04: [io 0x0065]
[ 0.440446] pnp 00:04: [io 0x0067]
[ 0.440449] pnp 00:04: [io 0x0070]
[ 0.440452] pnp 00:04: [io 0x0080]
[ 0.440456] pnp 00:04: [io 0x0092]
[ 0.440459] pnp 00:04: [io 0x00b2-0x00b3]
[ 0.440462] pnp 00:04: [io 0x0480-0x048f]
[ 0.440466] pnp 00:04: [io 0xffff]
[ 0.440469] pnp 00:04: [io 0xffff]
[ 0.440472] pnp 00:04: [io 0x0400-0x047f]
[ 0.440475] pnp 00:04: [io 0x1180-0x11ff]
[ 0.440479] pnp 00:04: [io 0xfe00]
[ 0.440482] pnp 00:04: [io 0xff2c-0xff7f]
[ 0.440574] system 00:04: [io 0x0480-0x048f] has been reserved
[ 0.440578] system 00:04: [io 0xffff] has been reserved
[ 0.440583] system 00:04: [io 0xffff] has been reserved
[ 0.440587] system 00:04: [io 0x0400-0x047f] has been reserved
[ 0.440591] system 00:04: [io 0x1180-0x11ff] has been reserved
[ 0.440596] system 00:04: [io 0xfe00] has been reserved
[ 0.440600] system 00:04: [io 0xff2c-0xff7f] has been reserved
[ 0.440606] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.440620] pnp 00:05: [io 0x0070-0x0077]
[ 0.440629] pnp 00:05: [irq 8]
[ 0.440674] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.440691] pnp 00:06: [io 0x0060]
[ 0.440694] pnp 00:06: [io 0x0064]
[ 0.440703] pnp 00:06: [irq 1]
[ 0.440753] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.440772] pnp 00:07: [irq 12]
[ 0.440819] pnp 00:07: Plug and Play ACPI device, IDs DLL0418 PNP0f13 (active)
[ 0.441027] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.441031] pnp 00:08: [mem 0xfed10000-0xfed13fff]
[ 0.441034] pnp 00:08: [mem 0xfed18000-0xfed18fff]
[ 0.441038] pnp 00:08: [mem 0xfed19000-0xfed19fff]
[ 0.441041] pnp 00:08: [mem 0xe0000000-0xefffffff]
[ 0.441045] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[ 0.441048] pnp 00:08: [mem 0xfed45000-0xfed8ffff]
[ 0.441146] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.441151] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.441155] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.441159] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.441164] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.441168] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.441172] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.441178] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.441356] pnp: PnP ACPI: found 9 devices
[ 0.441359] ACPI: ACPI bus type pnp unregistered
[ 0.449759] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.449766] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.449771] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.449786] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
[ 0.449791] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
[ 0.449807] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 20] add_size 400000
[ 0.449828] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.449833] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.449837] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.449841] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
[ 0.449845] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.449849] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.449858] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[ 0.449864] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.449869] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.449874] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0600000-0xc0afffff]
[ 0.449880] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.449885] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.449890] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0b00000-0xc0b000ff 64bit]
[ 0.449908] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.449913] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.449922] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.449929] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.449939] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.449944] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.449953] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.449960] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.449971] pci 0000:20:00.0: BAR 6: assigned [mem 0xf0920000-0xf093ffff pref]
[ 0.449975] pci 0000:00:1c.5: PCI bridge to [bus 20]
[ 0.449980] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.449989] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc0afffff]
[ 0.449996] pci 0000:00:1c.5: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
[ 0.450021] pci 0000:00:1e.0: PCI bridge to [bus 26]
[ 0.450083] pci 0000:00:1e.0: setting latency timer to 64
[ 0.450089] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.450093] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.450097] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.450101] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.450105] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.450108] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.450112] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.450116] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
[ 0.450120] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.450124] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
[ 0.450127] pci_bus 0000:08: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.450131] pci_bus 0000:08: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.450135] pci_bus 0000:20: resource 0 [io 0x2000-0x2fff]
[ 0.450139] pci_bus 0000:20: resource 1 [mem 0xc0600000-0xc0afffff]
[ 0.450142] pci_bus 0000:20: resource 2 [mem 0xf0900000-0xf09fffff 64bit pref]
[ 0.450146] pci_bus 0000:26: resource 4 [io 0x0000-0x0cf7]
[ 0.450150] pci_bus 0000:26: resource 5 [io 0x0d00-0xffff]
[ 0.450154] pci_bus 0000:26: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.450157] pci_bus 0000:26: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.450161] pci_bus 0000:26: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.450165] pci_bus 0000:26: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.450219] NET: Registered protocol family 2
[ 0.451401] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.456144] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.456812] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.456888] TCP: reno registered
[ 0.456903] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.456958] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.457123] NET: Registered protocol family 1
[ 0.457150] pci 0000:00:02.0: Boot video device
[ 0.457669] PCI: CLS 64 bytes, default 64
[ 0.457746] Unpacking initramfs...
[ 0.626300] Freeing initrd memory: 4636k freed
[ 0.628543] Simple Boot Flag at 0x3e set to 0x1
[ 0.629045] audit: initializing netlink socket (disabled)
[ 0.629069] type=2000 audit(1354288244.626:1): initialized
[ 0.648430] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.651510] VFS: Disk quotas dquot_6.5.2
[ 0.651590] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.651831] msgmni has been set to 5759
[ 0.652156] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.652204] io scheduler noop registered
[ 0.652208] io scheduler deadline registered
[ 0.652301] io scheduler cfq registered (default)
[ 0.652518] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.652689] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.652857] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.653107] intel_idle: does not run on family 6 model 23
[ 0.653156] GHES: HEST is not enabled!
[ 0.653245] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.653953] Linux agpgart interface v0.103
[ 0.654073] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.669080] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.669133] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.669294] mousedev: PS/2 mouse device common for all mice
[ 0.670409] rtc_cmos 00:05: RTC can wake from S4
[ 0.670599] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.670636] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.670648] cpuidle: using governor ladder
[ 0.670651] cpuidle: using governor menu
[ 0.670829] drop_monitor: Initializing network drop monitor service
[ 0.670946] TCP: cubic registered
[ 0.671122] NET: Registered protocol family 10
[ 0.671359] NET: Registered protocol family 17
[ 0.671373] Key type dns_resolver registered
[ 0.671720] PM: Hibernation image not present or could not be loaded.
[ 0.671743] registered taskstats version 1
[ 0.672782] rtc_cmos 00:05: setting system clock to 2012-11-30 15:10:45 UTC (1354288245)
[ 0.674872] Freeing unused kernel memory: 772k freed
[ 0.675168] Write protecting the kernel read-only data: 8192k
[ 0.682434] Freeing unused kernel memory: 1408k freed
[ 0.683107] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.685881] Freeing unused kernel memory: 568k freed
[ 0.698116] systemd-udevd[43]: starting version 195
[ 0.701918] SCSI subsystem initialized
[ 0.703991] ACPI: bus type scsi registered
[ 0.704082] libata version 3.00 loaded.
[ 0.705773] ahci 0000:00:1f.2: version 3.0
[ 0.705858] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.705949] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.705955] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
[ 0.705962] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.708617] scsi0 : ahci
[ 0.709413] scsi1 : ahci
[ 0.709823] scsi2 : ahci
[ 0.710229] scsi3 : ahci
[ 0.710359] ata1: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804100 irq 43
[ 0.710365] ata2: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804180 irq 43
[ 0.710367] ata3: DUMMY
[ 0.710370] ata4: DUMMY
[ 1.196712] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.196745] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.198401] ata1.00: ATA-8: WDC WD3200BEKT-75F3T0, 11.01A11, max UDMA/133
[ 1.198405] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.200123] ata1.00: configured for UDMA/133
[ 1.200301] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-7 11.0 PQ: 0 ANSI: 5
[ 1.201956] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.202042] sd 0:0:0:0: [sda] Write Protect is off
[ 1.202047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.202083] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.213584] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633F, D500, max UDMA/100
[ 1.213590] ata2.00: applying bridge limits
[ 1.229911] ata2.00: configured for UDMA/100
[ 1.232328] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-U633F D500 PQ: 0 ANSI: 5
[ 1.270602] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 1.271452] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.273864] ACPI: bus type usb registered
[ 1.273912] usbcore: registered new interface driver usbfs
[ 1.273946] usbcore: registered new interface driver hub
[ 1.273996] usbcore: registered new device driver usb
[ 1.274813] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.274869] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.274876] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.274891] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.278814] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.278826] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.278852] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf0804800
[ 1.279113] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.279117] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.280054] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.286696] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.286950] hub 1-0:1.0: USB hub found
[ 1.286958] hub 1-0:1.0: 6 ports detected
[ 1.287158] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.287164] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.287174] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.291082] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.291093] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.291118] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0804c00
[ 1.300028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.300266] hub 2-0:1.0: USB hub found
[ 1.300273] hub 2-0:1.0: 6 ports detected
[ 1.301086] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.301130] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.301135] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.301145] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.301191] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 1.301506] hub 3-0:1.0: USB hub found
[ 1.301513] hub 3-0:1.0: 2 ports detected
[ 1.301640] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.301645] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.301654] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.301701] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 1.301997] hub 4-0:1.0: USB hub found
[ 1.302004] hub 4-0:1.0: 2 ports detected
[ 1.302158] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.302164] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.302198] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.302230] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[ 1.302434] hub 5-0:1.0: USB hub found
[ 1.302441] hub 5-0:1.0: 2 ports detected
[ 1.302557] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.302562] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.302572] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.302603] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 1.302824] hub 6-0:1.0: USB hub found
[ 1.302833] hub 6-0:1.0: 2 ports detected
[ 1.303165] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.303171] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.303186] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.303219] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 1.303759] hub 7-0:1.0: USB hub found
[ 1.303766] hub 7-0:1.0: 2 ports detected
[ 1.303897] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.303903] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.303995] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.304040] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 1.304881] hub 8-0:1.0: USB hub found
[ 1.304888] hub 8-0:1.0: 2 ports detected
[ 1.323613] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 1.330105] [drm] Initialized drm 1.1.0 20060810
[ 1.331660] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 1.331843] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.333755] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 1.333940] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.334797] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.334889] ACPI: Lid Switch [LID0]
[ 1.335079] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.335086] ACPI: Power Button [PWRB]
[ 1.335191] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.335196] ACPI: Power Button [PWRF]
[ 1.341526] i915 0000:00:02.0: setting latency timer to 64
[ 1.414990] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 1.415006] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.415008] [drm] Driver supports precise vblank timestamp query.
[ 1.415071] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.606699] usb 2-4: new high-speed USB device number 2 using ehci_hcd
[ 1.630029] tsc: Refined TSC clocksource calibration: 1296.749 MHz
[ 1.630036] Switching to clocksource tsc
[ 2.030864] fbcon: inteldrmfb (fb0) is primary device
[ 2.090024] usb 2-5: new high-speed USB device number 3 using ehci_hcd
[ 2.574662] Console: switching to colour frame buffer device 170x48
[ 2.579271] fb0: inteldrmfb frame buffer device
[ 2.579273] drm: registered panic notifier
[ 2.680113] acpi device:07: registered as cooling_device0
[ 2.780104] acpi device:08: registered as cooling_device1
[ 2.780177] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.780313] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
[ 2.780358] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.963907] device-mapper: uevent: version 1.0.3
[ 2.964084] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email protected]
[ 3.763615] atkbd serio0: Unknown key pressed (translated set 2, code 0x8e on isa0060/serio0).
[ 3.763622] atkbd serio0: Use 'setkeycodes e00e <keycode>' to make it known.
[ 9.679599] XFS (dm-0): Mounting Filesystem
[ 9.807350] XFS (dm-0): Ending clean mount
[ 10.447920] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 10.481565] systemd[1]: systemd 196 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
[ 10.507375] systemd[1]: Set hostname to <xxx-laptop>.
[ 11.844864] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 11.845276] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 11.845371] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.845393] systemd[1]: Starting Login Prompts.
[ 11.845414] systemd[1]: Reached target Login Prompts.
[ 11.845429] systemd[1]: Starting Arch Daemons.
[ 11.845447] systemd[1]: Reached target Arch Daemons.
[ 11.845462] systemd[1]: Starting Remote File Systems.
[ 11.845481] systemd[1]: Reached target Remote File Systems.
[ 11.845496] systemd[1]: Starting Syslog Socket.
[ 11.845558] systemd[1]: Listening on Syslog Socket.
[ 11.845576] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 11.845615] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 11.845630] systemd[1]: Starting Delayed Shutdown Socket.
[ 11.845668] systemd[1]: Listening on Delayed Shutdown Socket.
[ 11.845766] systemd[1]: Starting udev Kernel Socket.
[ 11.845804] systemd[1]: Listening on udev Kernel Socket.
[ 11.845885] systemd[1]: Starting udev Control Socket.
[ 11.845927] systemd[1]: Listening on udev Control Socket.
[ 11.845979] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 11.846139] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 11.846157] systemd[1]: Expecting device dev-mapper-home.device...
[ 11.846175] systemd[1]: Expecting device dev-sda8.device...
[ 11.846193] systemd[1]: Expecting device dev-mapper-swap.device...
[ 11.846210] systemd[1]: Expecting device dev-sda6.device...
[ 11.846232] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 11.846291] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 11.846308] systemd[1]: Expecting device dev-disk-by\x2duuid-f19efb1f\x2d9a5b\x2d4f22\x2db35d\x2d4a603145a436.device...
[ 11.846328] systemd[1]: Expecting device dev-disk-by\x2duuid-bd984744\x2d036e\x2d47e5\x2db40f\x2d04fa9f6d0f35.device...
[ 11.846347] systemd[1]: Expecting device dev-disk-by\x2duuid-f1bab4e5\x2de736\x2d443a\x2d827e\x2d59f202a548ab.device...
[ 11.846368] systemd[1]: Starting Journal Socket.
[ 11.846439] systemd[1]: Listening on Journal Socket.
[ 11.846467] systemd[1]: Started File System Check on Root Device.
[ 11.846485] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 11.850382] systemd[1]: Mounting Temporary Directory...
[ 11.998839] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. (To see the over-mounted files, please manually mount the underlying file system to a secondary location.)
[ 12.026864] systemd[1]: Mounting Huge Pages File System...
[ 12.040270] systemd[1]: Mounting POSIX Message Queue File System...
[ 12.043518] systemd[1]: Starting udev Coldplug all Devices...
[ 12.156149] systemd[1]: Starting Load Kernel Modules...
[ 12.173525] systemd[1]: Mounting Debug File System...
[ 12.186770] systemd[1]: Starting Setup Virtual Console...
[ 12.484840] systemd[1]: Starting Apply Kernel Variables...
[ 12.616915] systemd[1]: Starting Set Up Additional Binary Formats...
[ 12.630266] systemd[1]: Starting udev Kernel Device Manager...
[ 12.636850] systemd[1]: Starting Journal Service...
[ 12.646587] systemd[1]: Started Journal Service.
[ 12.646650] systemd[1]: Starting Syslog.
[ 12.646684] systemd[1]: Reached target Syslog.
[ 12.647637] systemd[1]: Started Remount Root and Kernel File Systems.
[ 12.647816] systemd[1]: Mounted Temporary Directory.
[ 12.647972] systemd[1]: Mounted Huge Pages File System.
[ 12.648127] systemd[1]: Mounted POSIX Message Queue File System.
[ 12.653654] systemd[1]: Mounted Debug File System.
[ 12.653705] systemd[1]: Starting Local File Systems (Pre).
[ 12.653726] systemd[1]: Reached target Local File Systems (Pre).
[ 12.653749] systemd[1]: Starting Load Random Seed...
[ 12.705203] FS-Cache: Loaded
[ 12.740616] RPC: Registered named UNIX socket transport module.
[ 12.740621] RPC: Registered udp transport module.
[ 12.740624] RPC: Registered tcp transport module.
[ 12.740626] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.881473] systemd-udevd[162]: starting version 196
[ 12.988696] FS-Cache: Netfs 'nfs' registered for caching
[ 13.298794] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 13.299212] r8169 0000:20:00.0: irq 45 for MSI/MSI-X
[ 13.299501] r8169 0000:20:00.0: eth0: RTL8168d/8111d at 0xffffc9000060e000, 00:26:b9:ca:52:29, XID 081000c0 IRQ 45
[ 13.299506] r8169 0000:20:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 13.401185] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 13.802403] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 14.148667] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 14.148733] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 14.208405] cfg80211: Calling CRDA to update world regulatory domain
[ 14.318480] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 14.330974] lib80211: common routines for IEEE802.11 drivers
[ 14.330979] lib80211_crypt: registered algorithm 'NULL'
[ 14.375031] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 14.649332] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
[ 14.656959] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 14.660799] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
[ 14.668564] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 14.709327] ACPI: Requesting acpi_cpufreq
[ 14.714946] Monitor-Mwait will be used to enter C-1 state
[ 14.714973] Monitor-Mwait will be used to enter C-2 state
[ 14.714989] Monitor-Mwait will be used to enter C-3 state
[ 14.715001] tsc: Marking TSC unstable due to TSC halts in idle
[ 14.715031] ACPI: acpi_idle registered with cpuidle
[ 14.720557] Switching to clocksource hpet
[ 14.757813] wmi: Mapper loaded
[ 15.215288] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
[ 15.215300] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.215306] ACPI Warning: 0x0000000000001180-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
[ 15.215313] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.215315] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 15.303785] ACPI: Battery Slot [BAT1] (battery present)
[ 15.405750] input: Dell WMI hotkeys as /devices/virtual/input/input8
[ 15.417769] iTCO_vendor_support: vendor-support=0
[ 15.430131] ACPI: AC Adapter [ACAD] (off-line)
[ 15.471845] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 15.471895] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
[ 15.472076] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.585541] wl: module license 'Mixed/Proprietary' taints kernel.
[ 15.585549] Disabling lock debugging due to kernel taint
[ 15.625424] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa00000/0x20000, board id: 3655, fw id: 528343
[ 15.629342] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[ 15.654093] lib80211_crypt: registered algorithm 'TKIP'
[ 15.654584] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.112
[ 15.693893] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 15.816131] ACPI Warning: 0x0000000000001c00-0x0000000000001c1f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
[ 15.816143] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.108446] Linux media interface: v0.10
[ 16.120558] Linux video capture interface: v2.00
[ 16.169228] usbcore: registered new interface driver uas
[ 16.281166] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6415)
[ 16.316308] Initializing USB Mass Storage driver...
[ 16.316609] usbcore: registered new interface driver usb-storage
[ 16.316613] USB Mass Storage support registered.
[ 16.328744] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input10
[ 16.328873] usbcore: registered new interface driver uvcvideo
[ 16.328876] USB Video Class driver (1.1.1)
[ 16.779720] usb 2-4: USB disconnect, device number 2
[ 16.783629] scsi4 : usb-storage 2-4:1.0
[ 16.783773] usbcore: registered new interface driver ums-realtek
[ 17.381988] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
[ 17.393596] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 21.567415] Adding 977880k swap on /dev/mapper/swap. Priority:-1 extents:1 across:977880k
[ 21.656824] XFS (dm-1): Mounting Filesystem
[ 21.839619] XFS (dm-1): Ending clean mount
[ 21.940898] systemd-journald[163]: Received SIGUSR1
[ 28.055735] r8169 0000:20:00.0: eth0: link down
[ 28.055792] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.875645] Bluetooth: Core ver 2.16
[ 28.875677] NET: Registered protocol family 31
[ 28.875680] Bluetooth: HCI device and connection manager initialized
[ 28.875684] Bluetooth: HCI socket layer initialized
[ 28.875687] Bluetooth: L2CAP socket layer initialized
[ 28.875695] Bluetooth: SCO socket layer initialized
[ 29.041069] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 37.807702] fuse init (API version 7.20)
[ 37.828734] EXT4-fs (sda5): re-mounted. Opts: commit=600
lsmod
Module Size Used by
fuse 69173 2
michael_mic 2074 8
arc4 2039 4
ecb 2105 0
bnep 8857 2
bluetooth 192120 7 bnep
snd_seq 50881 1
snd_seq_device 5268 1 snd_seq
ums_realtek 7391 0
usb_storage 47384 1 ums_realtek
uvcvideo 72787 0
videobuf2_vmalloc 2468 1 uvcvideo
uas 11119 0
videobuf2_memops 2246 1 videobuf2_vmalloc
videobuf2_core 24030 1 uvcvideo
videodev 100859 2 uvcvideo,videobuf2_core
media 10405 2 uvcvideo,videodev
i2c_i801 9571 0
joydev 9991 0
coretemp 6070 0
kvm_intel 124749 0
lib80211_crypt_tkip 7738 0
wl 2558087 0
kvm 373917 1 kvm_intel
iTCO_wdt 5255 0
iTCO_vendor_support 1929 1 iTCO_wdt
dell_wmi 1485 0
acpi_cpufreq 5933 1
lpc_ich 10609 0
ac 2536 0
mperf 1267 1 acpi_cpufreq
sparse_keymap 3056 1 dell_wmi
battery 6773 0
wmi 8379 1 dell_wmi
dell_laptop 8787 0
processor 26855 3 acpi_cpufreq
evdev 10266 12
psmouse 71909 0
serio_raw 4689 0
dcdbas 5520 1 dell_laptop
lib80211 3949 2 wl,lib80211_crypt_tkip
microcode 12377 0
cfg80211 177108 1 wl
rfkill 15604 5 cfg80211,bluetooth
snd_hda_codec_hdmi 24487 1
snd_hda_codec_realtek 61193 1
snd_hda_intel 26180 3
snd_hda_codec 98033 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6428 1 snd_hda_codec
snd_pcm_oss 38992 0
snd_pcm 75689 5 snd_pcm_oss,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
snd_timer 18934 3 snd_pcm,snd_seq
snd_mixer_oss 15347 1 snd_pcm_oss
snd 60188 16 snd_hda_codec_realtek,snd_pcm_oss,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_mixer_oss
soundcore 5442 1 snd
pcspkr 1899 0
r8169 56839 0
mii 4091 1 r8169
nfs 127007 0
lockd 64904 1 nfs
sunrpc 186092 2 nfs,lockd
fscache 40995 1 nfs
ablk_helper 1972 0
cryptd 8741 1 ablk_helper
aes_x86_64 7508 6
aes_generic 26138 1 aes_x86_64
xts 3101 3
gf128mul 6050 1 xts
dm_crypt 15799 3
dm_mod 72105 7 dm_crypt
i915 495521 3
video 11276 1 i915
button 4662 1 i915
i2c_algo_bit 5391 1 i915
intel_agp 10744 1 i915
intel_gtt 15659 3 i915,intel_agp
drm_kms_helper 32877 1 i915
drm 218852 4 i915,drm_kms_helper
i2c_core 20707 6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev
vfat 10119 0
fat 48338 1 vfat
xfs 748207 2
ext4 440434 1
crc16 1359 2 ext4,bluetooth
jbd2 78751 1 ext4
mbcache 5977 1 ext4
uhci_hcd 23436 0
ehci_hcd 41816 0
sr_mod 14823 0
usbcore 150398 6 uas,uhci_hcd,uvcvideo,ums_realtek,usb_storage,ehci_hcd
usb_common 954 1 usbcore
cdrom 35520 1 sr_mod
sd_mod 29559 5
ahci 21360 4
libahci 20023 1 ahci
libata 167683 2 ahci,libahci
scsi_mod 133386 5 uas,usb_storage,libata,sd_mod,sr_mod
lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
08:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
20:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
pacman -Q | grep ...
alsa-lib 1.0.26-1
alsa-plugins 1.0.26-1
alsa-utils 1.0.26-1
alsaplayer 0.99.81-5
lib32-alsa-lib 1.0.26-1
lib32-alsa-plugins 1.0.26-1
lib32-libpulse 2.1-1
lib32-libsndfile 1.0.25-2
libcanberra-pulse 0.30-2
libcdaudio 0.99.12-6
libpulse 2.1-1
libsndfile 1.0.25-2
portaudio 19_20111121-1
pulseaudio 2.1-1
pulseaudio-alsa 2-1
sound-juicer 3.5.0-1
sound-theme-freedesktop 0.8-1
soundtouch 1.6.0-1
teamspeak-soundpack-portal 1-4
webrtc-audio-processing 0.1-1
pactl list
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "2.1"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "2.1"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "2.1"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "2.1"
Module #4
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "2.1"
Module #5
Name: module-jackdbus-detect
Argument:
Usage counter: n/a
Properties:
module.author = "David Henningsson"
module.descriptI set the loglevel to debug and rebooted.
grep -i pulse /var/log/everything.log
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
Dec 3 00:06:34 localhost rtkit-daemon[442]: Successfully made thread 713 of process 713 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-util.c: RealtimeKit worked.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-util.c: Successfully gained nice level -11.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: This is PulseAudio 2.1
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running on host: Linux x86_64 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Found 2 CPUs.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Page size is 4096 bytes
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compiled with Valgrind support: no
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in valgrind mode: no
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in VM: no
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Optimized build: yes
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Machine ID is 883cea362d03be37758a39f4000006db.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using runtime directory /home/whatever/.pulse/883cea362d03be37758a39f4000006db-runtime.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using state directory /home/whatever/.pulse.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-2.1/modules.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in system mode: no
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-device-volumes.tdb'
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-device-volumes'.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-stream-volumes.tdb'
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-stream-volumes'.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry4
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry5
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-card-database.tdb'
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-card-database'.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-udev-detect.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: Found 1 cards.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #4; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-jackdbus-detect.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus f8aad50a9c72259e812fef8050bbed02 as :1.11
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-jackdbus-detect.c: jackdbus isn't running.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #5; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-bluetooth-discover.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus aca7467032ad6386c1a812c250bbecf9 as :1.27
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #6; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-esound-protocol-unix.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #7; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #8; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-gconf.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-gconf" (index: #9; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-default-device-restore.c: Saved default sink 'auto_null' not existent, not restoring default sink setting.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-default-device-restore.c: Saved default source 'auto_null.monitor' not existent, not restoring default source setting.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #10; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #11; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-always-sink.c: Autoloading null-sink as no other sinks detected.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Restoring volume for sink auto_null.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.description = "Dummy Output"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.class = "abstract"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.icon_name = "audio-card"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.description = "Monitor of Dummy Output"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.class = "monitor"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
Dec 3 01:06:35 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Thread starting up
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Could not set format on sink auto_null
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-null-sink" (index: #12; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-always-sink" (index: #13; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #14; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #15; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-console-kit.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-console-kit" (index: #16; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-systemd-login.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] client.c: Created 0 "Login Session 1"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-systemd-login.c: Added new session 1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #17; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #18; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork roles.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-role-cork" (index: #19; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #20; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #21; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-dbus-protocol.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Memstats added for object /org/pulseaudio/core1/memstats
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/sink0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Sink added for object /org/pulseaudio/core1/sink0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/source0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source added for object /org/pulseaudio/core1/source0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module2
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module3
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module4
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module5
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module6
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module7
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module8
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module9
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module10
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module11
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module12
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module13
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module14
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module15
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module16
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module17
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module18
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module19
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module20
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module21
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1 added for object /org/pulseaudio/core1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-dbus-protocol" (index: #22; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #23; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Got org.PulseAudio1!
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Got org.pulseaudio.Server!
Dec 3 01:06:35 localhost pulseaudio[710]: [pulseaudio] main.c: Daemon startup successful.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Daemon startup complete.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module22
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module23
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-settings-daemon
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client2
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-shell
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Found /usr/share/applications/gnome-shell.desktop.
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Created 3 "Native client (UNIX socket client)"
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client3
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for canberra-gtk-play
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 3 "canberra-gtk-play"
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client3
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
Dec 3 00:06:38 localhost rtkit-daemon[442]: Successfully made thread 745 of process 745 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-util.c: RealtimeKit worked.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-util.c: Successfully gained nice level -11.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: This is PulseAudio 2.1
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running on host: Linux x86_64 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Found 2 CPUs.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Page size is 4096 bytes
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compiled with Valgrind support: no
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in valgrind mode: no
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in VM: no
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Optimized build: yes
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Machine ID is 883cea362d03be37758a39f4000006db.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using runtime directory /home/whatever/.pulse/883cea362d03be37758a39f4000006db-runtime.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using state directory /home/whatever/.pulse.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-2.1/modules.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in system mode: no
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] pid.c: Daemon already running.
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 4 "Native client (UNIX socket client)"
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client4
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pactl
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-x11-publish" (index: #24; argument: "display=:0").
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module24
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 4 "pactl"
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client4
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 5 "Native client (UNIX socket client)"
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client5
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pactl
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-x11-xsmp.c: Connected to session manager 'gnome-session' as '102459fa9aeb823737135449319899169800000005480030'.
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 6 "XSMP Session on gnome-session as 102459fa9aeb823737135449319899169800000005480030"
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-x11-xsmp" (index: #25; argument: "display=:0 session_manager=local/whatever-laptop:@/tmp/.ICE-unix/548,unix/whatever-laptop:/tmp/.ICE-unix/548").
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client6
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module25
Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 5 "pactl"
Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client5
Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ...
Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0004, suspending
Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
Dec 3 01:06:52 localhost pulseaudio[713]: [pulseaudio] client.c: Created 7 "Native client (UNIX socket client)"
Dec 3 01:06:52 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client7
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-shell
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink auto_null.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:auto_null:null.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-media-role:event.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-intended-roles.c: Not setting device for stream audio-volume-change, because already set.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0000, resuming
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes busy.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Created input 0 "audio-volume-change" on auto_null with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: event.id = "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.role = "event"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.name = "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.name = "GNOME Shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.version = "26"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.id = "org.gnome.Shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.id = "717"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.user = "whatever"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.host = "whatever-laptop"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.binary = "gnome-shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.language = "en_US.utf8"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: window.x11.display = ":0"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.machine_id = "883cea362d03be37758a39f4000006db"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:event"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested latency=1960.00 ms, Received latency=1960.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Final latency 3960.00 ms = 1960.00 ms + 2*20.00 ms + 1960.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream0
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Requesting rewind due to end of underrun.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Underrun on 'audio-volume-change', 0 bytes in queue.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink auto_null.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:auto_null:null.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 352800 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 54188 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream removed from object /org/pulseaudio/core1/playback_stream0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Freeing input 0 "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-media-role:event.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-intended-roles.c: Not setting device for stream audio-volume-change, because already set.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes busy.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Created input 1 "audio-volume-change" on auto_null with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: event.id = "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.role = "event"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.name = "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.name = "GNOME Shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.version = "26"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.id = "org.gnome.Shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.id = "717"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.user = "whatever"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.host = "whatever-laptop"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.binary = "gnome-shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.language = "en_US.utf8"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: window.x11.display = ":0"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.machine_id = "883cea362d03be37758a39f4000006db"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:event"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested latency=1960.00 ms, Received latency=1960.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Final latency 3960.00 ms = 1960.00 ms + 2*20.00 ms + 1960.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream1
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Requesting rewind due to end of underrun.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Underrun on 'audio-volume-change', 0 bytes in queue.
Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 352800 bytes.
Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 352800 bytes.
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream removed from object /org/pulseaudio/core1/playback_stream1
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Freeing input 1 "audio-volume-change"
Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ...
Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0004, suspending
Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
Dec 3 01:08:28 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Synced.
By now I also made my system not load any moudules which have oss in their name. Didn't help either. -
[S]Systemd can't start Load Kernel Modules after upgrade to Linux 4.0
After upgrading from linux 3.19.3-3 to 4.0.1-1 I've been having a bit of an issue. At that same time I upgraded readline (6.3.006-1 → 6.3.008-1), linux-firmware (20150206.17657c3-1 → 20150410.ec89525-1), nvidia (349.16-1 → 349.16-2) , wpa_suplican (2.4-1 → 1:2.3-1), and arpack (3.1.5-1 → 3.2.0-1). There may be some typos there since I'm copying by hand. Normally this wouldn't be much of a problem because I have been, priory to a few weeks ago, really good about back ups and would just roll my OS back 15 minutes. But things like that tend to fly out the window when the semester gets heavy. My last snapshot was on May 22nd, which I could still use, but would rather not. Also, it seems like a good idea to try to actual fix things for a change.
[edit] I should mention that this upgrade was run April 30th.[/edit]
When I finished booting the system after the upgrade, I got an error message during boot “systemd[1]: Failed to start Load Kernel Modules.” When it finished booting I run “dmesg -l err” to confirm that I'm not having a bad day dream or something. I'm also still seeing the errors that I described in this thread. Don't know if the two are related. I also noticed, when I was logging in, that it said that my stystem was still using the old kernel. Indeed, according to “uname -r” I'm still using 3.19.3-3-ARCH.
The closest thing to experience I have with this is when I forget to mount /boot before upgrading linux, so I made sure /boot was mounted and rand “sudo pacman -S linux” to reinstall, but this didn't help. Just to check I ran “ls /lib/modules” and see the directorys “4.0.1-1-ARCH” and “extramodules-4.0-ARCH” as I would expect after a succesful upgrade of the kernel.
Running “systemctl –failed, shows that in addition to systemd-modules-load.service, lm_sensors.service has also failed. I somehow expect lm_sensors depends on systemd-modules-load. I tried “systemctl restart systemd-modules-load”, but was rewarded with a message telling me that it failed. The “journalctl -xe” log has the lines
systemd[1]: system-modules-load[1799]: Failed to look up alias 'sg': Function not implemented
systemd[1]: system-modules-load[1799]: Failed to look up alias 'nfs': Function not implemented
Looking at the Wiki for Systemd under troubleshooting it actually has an example of trying to work through this exact issue. Following that I tried
journalctl _PID=1799
systemd[1]: system-modules-load[1799]: Failed to look up alias 'sg': Function not implemented
systemd[1]: system-modules-load[1799]: Failed to look up alias 'nfs': Function not implemented
which I already mentioned. At this point that bit of the Wiki stopped being useful.
Looking up on Google Failed to look up alias 'nfs': Function not implemented returned this thread from two years ago. Running “lsmod |grep sg” or $lsmod |grep nfs” returns nothing, but it also returns nothing on this laptop I'm using as well, so I don't imagine that is useful. Also, “# grep nfs /lib/modules/4.0.1-1-ARCH/modules.alias” returns a “Nosuch file or directory” error.
Searching for something on 'sg' turned up https://bbs.archlinux.org/viewtopic.php?id=165361, which was also not useful.
As a sort of last resort I tried https://wiki.archlinux.org/index.php/Do … the_kernel
I reboot and boot into my fallback installation, running 3.19.3-3, mount the partition with my main Arch on it, and arch-chroot into it.
I downgraded linux, and nvidia, exited chroot, and rebooted hoping to the Great Bacon that I didn't do anything too damaging. After all, my back ups are more than a week out of date.
This worked. I'm still getting those annyoing (they are only annoying right?) error messages I mentioned earlier. My system seems fine, if somewhat out of date.
Still, the question remains, “why did that happen, and how do I actually fix it?”
[edit2=solution]
There were two problems. First, my grub.cfg entry was pointing to the wrong UUID. I fixed this by regenerating it. Then I noticed the UUID in the grub menu itself (during the boot prosses) did not match what was in grub.cfg. To fix this I reinstalled grub.
Last edited by nstgc (2015-05-05 12:07:30)Well, I took snapshots, not back ups but they work well enough for this, and rsynced /boot/ to where it use to be, moved/renamed the subvolume boot, and commented out the appropriate line in fstab. I also deleted that other /boot from before. I unmount /boot, and regenerate my grub.cfg. If my machine still boots, I'll try for an upgrade.
grub.cfg now looks like
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
font="/arch/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
echo 'Loading Linux linux ...'
linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
echo 'Loading initial ramdisk ...'
initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux.img
submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
echo 'Loading Linux linux ...'
linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
echo 'Loading initial ramdisk ...'
initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux.img
menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
echo 'Loading Linux linux ...'
linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
echo 'Loading initial ramdisk ...'
initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Vista (loader) (on /dev/sdd2)' --class windows --class os $menuentry_id_option 'osprober-chain-30F403F0F403B75E' {
insmod part_gpt
insmod ntfs
set root='hd3,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt2 --hint-efi=hd3,gpt2 --hint-baremetal=ahci3,gpt2 30F403F0F403B75E
else
search --no-floppy --fs-uuid --set=root 30F403F0F403B75E
fi
chainloader +1
menuentry 'Windows Vista (loader) (on /dev/sdd4)' --class windows --class os $menuentry_id_option 'osprober-chain-FE2648382647EFE7' {
insmod part_gpt
insmod ntfs
set root='hd3,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt4 --hint-efi=hd3,gpt4 --hint-baremetal=ahci3,gpt4 FE2648382647EFE7
else
search --no-floppy --fs-uuid --set=root FE2648382647EFE7
fi
chainloader +1
menuentry 'Arch (on /dev/sdd5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
insmod part_gpt
insmod ext2
set root='hd3,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt5 --hint-efi=hd3,gpt5 --hint-baremetal=ahci3,gpt5 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
else
search --no-floppy --fs-uuid --set=root 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
fi
linux /boot/vmlinuz-linux root=/dev/sdd5
initrd /boot/initramfs-linux.img
submenu 'Advanced options for Arch (on /dev/sdd5)' $menuentry_id_option 'osprober-gnulinux-advanced-832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
menuentry 'Arch (on /dev/sdd5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-linux--832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
insmod part_gpt
insmod ext2
set root='hd3,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt5 --hint-efi=hd3,gpt5 --hint-baremetal=ahci3,gpt5 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
else
search --no-floppy --fs-uuid --set=root 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
fi
linux /boot/vmlinuz-linux root=/dev/sdd5
initrd /boot/initramfs-linux.img
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
if [ "${grub_platform}" == "pc" ]; then
menuentry "Memory Tester (memtest86+)" --class memtest86 --class gnu --class tool {
search --fs-uuid --no-floppy --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
linux16 /arch/boot/memtest86+/memtest.bin
fi
### END /etc/grub.d/60_memtest86+ ###
It seems as if the lines you mentioned, Scimmia, have changed. I'll take that as a good sign.
[edit] System still boots. Trying for the upgrade.
[edit2] Still can't use Linux 4.0. I'm getting the same errors as before.
[edit3] Successfully downgraded.
[edit4] I looked through /etc/mkinitcpio.conf and there isn't anything in there that isn't in my laptop's. I don't know if this will help, but here is the output of "pacman -Q"
a52dec 0.7.4-8
aalib 1.4rc5-10
abs 2.4.4-2
accountsservice 0.6.40-1
acl 2.2.52-2
adobe-source-han-sans-jp-fonts 1.002-1
adwaita-icon-theme 3.16.0-1
alsa-lib 1.0.29-1
alsa-plugins 1.0.29-2
alsa-utils 1.0.29-1
alsi 0.4.7-1
arch-install-scripts 15-1
arch-wiki-docs 20150219-1
arch-wiki-lite 20150219-2
archlinux-keyring 20150212-1
arpack 3.2.0-1
aspell 0.60.6.1-2
asunder 2.7-1
at-spi2-atk 2.16.0-1
at-spi2-core 2.16.0-1
atk 2.16.0-1
atkmm 2.22.7-1
attr 2.4.47-1
autoconf 2.69-2
automake 1.15-1
avahi 0.6.31-15
awesome 3.5.6-1
bash 4.3.033-1
bash-completion 2.1-5
bc 1.06.95-1
bcache-tools 1.0.8-1
bigpkg 0.4.0-2
binutils 2.25-2
bison 3.0.4-1
blas 3.5.0-1
bluez 5.30-1
bluez-libs 5.30-1
bonnie++ 1.97-1
boost 1.58.0-1
boost-libs 1.58.0-1
btrfs-progs 3.19.1-1
bullet 2.82-1
bzip2 1.0.6-5
ca-certificates 20150402-1
ca-certificates-cacert 20140824-2
ca-certificates-mozilla 3.18-3
ca-certificates-utils 20150402-1
cabextract 1.4-3
cairo 1.14.2-1
cairo-clock 0.3.4-4
cairo-dock 3.4.1-1
cairo-dock-plug-ins 3.4.1-1
cairomm 1.10.0-3
calibre 2.27.0-1
cantarell-fonts 0.0.16-2
caribou 0.4.18.1-1
cddb-py 1.4-7
cdparanoia 10.2-5
cdrdao 1.2.3-7
cdrtools 3.01a28-1
celt 0.11.3-2
cfv 1.18.3-6
cheese 3.16.1-1
chmlib 0.40-4
chromaprint 1.1-2
chromium 42.0.2311.135-1
chromium-pepper-flash 1:17.0.0.169-3
cifs-utils 6.4-1
cinnamon-desktop 2.4.2-1
cinnamon-translations 2.4.4-1
clementine 1.2.3-5
clucene 2.3.3.4-8
clutter 1.22.0-2
clutter-gst2 2.0.14-1
clutter-gtk 1.6.0-2
cmus 2.6.0-4
cogl 1.20.0-1
colord 1.2.9-2
colord-gtk 0.1.26-2
compositeproto 0.4.2-3
confuse 2.7-3
coreutils 8.23-1
cracklib 2.9.4-1
cryptsetup 1.6.6-1
cups 2.0.2-4
cups-filters 1.0.68-1
cups-pk-helper 0.2.5-1
curl 7.42.0-1
damageproto 1.2.1-3
db 5.3.28-2
dbus 1.8.16-2
dbus-glib 0.102-2
dconf 0.24.0-1
desktop-file-utils 0.22-1
device-mapper 2.02.116-1
dhclient 4.3.2-1
dhcpcd 6.8.1-1
dia 0.97.3-1
dialog 1:1.2_20150225-1
dictd 1.12.1-4
diffutils 3.3-2
ding-libs 0.4.0-3
djvulibre 3.5.27-1
dnssec-anchors 20150403-1
dotconf 1.3-4
dri2proto 2.8-2
dri3proto 1.0-1
dvd+rw-tools 7.1-5
dvdisaster 0.72.6-1
e2fsprogs 1.42.12-2
ecryptfs-utils 106-1
ed 1.11-1
efl 1.13.2-1
elementary 1.13.2-1
elfutils 0.161-3
enca 1.16-1
enchant 1.6.0-5
enlightenment 0.19.4-1
evas_generic_loaders 1.13.2-1
evince 3.16.0-1
exempi 2.2.2-1
exfat-utils 1.1.1-1
exif-py 1.2.0-1
exiv2 0.24-1
expac 4-3
expat 2.1.0-4
extcalc 0.9.3_1-3
faac 1.28-5
faad2 2.7-4
fakeroot 1.20.2-1
fbreader 0.99.4-4
ffmpeg 1:2.6.2-1
fftw 3.3.4-1
file 5.22-1
file-roller 3.16.1-1
filesystem 2015.02-1
findutils 4.4.2-6
firefox 37.0.2-1
fixesproto 5.0-3
flac 1.3.1-1
flashplugin 11.2.202.457-1
flex 2.5.39-1
fltk 1.3.3-4
fluidsynth 1.1.6-4
fontconfig 2.11.1-1
fontsproto 2.1.3-1
foomatic-db 3:20150308-1
foomatic-db-engine 3:20150308-1
freetype2 2.5.5-1
fribidi 0.19.6-2
fsarchiver 0.6.19-1
fuse 2.9.3-2
fuse-exfat 1.1.0-1
gawk 4.1.2-1
gc 7.4.2-2
gcc-fortran 4.9.2-4
gcc-libs-multilib 4.9.2-4
gcc-multilib 4.9.2-4
gconf 3.2.6-3
gcr 3.15.92-1
gd 2.1.1-2
gdb 7.9-1
gdbm 1.11-1
gdk-pixbuf2 2.31.3-1
geany 1.24.1-1
gemrb 0.8.2-1
geoclue 0.12.99-2
geoclue2 2.2.0-2
geocode-glib 3.16.0-1
gettext 0.19.4-1
ghostscript 9.16-1
giflib 5.1.1-1
git 2.3.7-1
gjs 1.43.3-1
glew 1.12.0-1
glib-networking 2.44.0-2
glib2 2.44.0-1
glibc 2.21-3
glibmm 2.44.0-1
glproto 1.4.17-1
glu 9.0.0-3
gmime 2.6.20-2
gmp 6.0.0-2
gnome-bluetooth 3.16.1-1
gnome-color-manager 3.16.0-1
gnome-control-center 3.16.1-2
gnome-desktop 1:3.16.1-1
gnome-dictionary 3.16.1-1
gnome-disk-utility 3.16.0-1
gnome-menus 3.13.3-1
gnome-online-accounts 3.16.0-2
gnome-session 3.16.0-1
gnome-settings-daemon 3.16.1-1
gnome-shell 3.16.1-2
gnome-shell-extensions 3.16.1-1
gnome-system-monitor 3.16.0-1
gnome-themes-standard 3.16.0-1
gnome-tweak-tool 3.16.1-1
gnome-video-effects 0.4.1-1
gnupg 2.1.3-3
gnuplot 5.0.0-2
gnutls 3.4.0-1
gobject-introspection 1.44.0-1
gobject-introspection-runtime 1.44.0-1
google-chrome 42.0.2311.135-1
gparted 0.22.0-1
gpgme 1.5.4-1
gpm 1.20.7-4
graphite 1:1.2.4-1
grep 2.21-2
grilo 0.2.12-1
groff 1.22.3-3
grsync 1.2.5-1
grub 1:2.02.beta2-5
gsettings-desktop-schemas 3.16.1-1
gsfonts 20150122-1
gsm 1.0.13-8
gssproxy 0.4.1-1
gst-libav 1.4.5-1
gst-plugins-bad 1.4.5-2
gst-plugins-base 1.4.5-1
gst-plugins-base-libs 1.4.5-1
gst-plugins-good 1.4.5-2
gst-plugins-ugly 1.4.5-2
gstreamer 1.4.5-1
gstreamer0.10 0.10.36-4
gstreamer0.10-base 0.10.36-3
gstreamer0.10-base-plugins 0.10.36-3
gstreamer0.10-good 0.10.31-6
gstreamer0.10-good-plugins 0.10.31-6
gstreamer0.10-python 0.10.22-2
gstreamer0.10-ugly 0.10.19-14
gstreamer0.10-ugly-plugins 0.10.19-14
gthumb 3.4.0-1
gtk-update-icon-cache 2.24.27-1
gtk2 2.24.27-1
gtk3 3.16.2-1
gtkmm 2.24.4-1
gtkmm3 3.16.0-1
guile 2.0.11-2
gvfs 1.24.1-1
gvfs-mtp 1.24.1-1
gzip 1.6-1
hal-info 0.20091130-2
harfbuzz 0.9.40-2
harfbuzz-icu 0.9.40-2
haveged 1.9.1-2
hdparm 9.45-1
hdsentinel 0.8-2
help2man 1.46.4-1
hicolor-icon-theme 0.13-1
hplip 3.15.4-1
hspell 1.2-2
htmlcxx 0.85-4
htop 1.0.3-2
hunspell 1.3.3-1
hwids 20150129-1
hwinfo 21.10.1.1-1
hwloc 1.10.1-1
hyphen 2.8.8-1
i3-wm 4.10.2-1
i3lock 2.6-1
i3status 2.9-1
i7z 0.27.2.git1-1
iana-etc 2.30-4
icedtea-web 1.5.2-1
icu 55.1-1
imagemagick 6.9.1.0-1
imagewriter 1.10.1420800585.134a9b3-1
imlib2 1.4.7-1
inetutils 1.9.2-2
innoextract 1.4-0
inputproto 2.3.1-1
intel-tbb 4.3_20150209-1
intel-ucode 20150121-1
inxi 2.2.19-1
iproute2 3.19.0-1
iptables 1.4.21-3
iputils 20121221-3
ipython 3.1.0-1
iso-codes 3.57-1
jack 0.124.1-3
jansson 2.7-1
jasper 1.900.1-13
java-environment-common 2-2
java-runtime-common 2-2
jdk7-openjdk 7.u79_2.5.5-1
jfsutils 1.1.15-4
jmtpfs 0.5-1
jre7-openjdk 7.u79_2.5.5-1
jre7-openjdk-headless 7.u79_2.5.5-1
js 24.2.0-1
js17 17.0.0-1
json-c 0.12-2
json-glib 1.0.2-1
jsoncpp 1.4.4-1
julia 2:0.3.7-1
julia-docs 2:0.3.7-1
kbd 2.0.2-1
kbproto 1.0.7-1
keyutils 1.5.9-1
kmod 20-1
krb5 1.13.1-1
kvirc 4.2.0-4
lame 3.99.5-2
lapack 3.5.0-1
lcms 1.19-5
lcms2 2.6-1
ldb 1.1.20-1
ldns 1.6.17-2
less 471-1
lgogdownloader-git 20150310-1
lib32-acl 2.2.52-2
lib32-alsa-lib 1.0.29-1
lib32-alsa-plugins 1.0.29-2
lib32-atk 2.16.0-1
lib32-attr 2.4.47-1
lib32-bzip2 1.0.6-2
lib32-cairo 1.14.2-1
lib32-curl 7.41.0-1
lib32-db 5.3.28-2
lib32-e2fsprogs 1.42.12-1
lib32-elfutils 0.161-2
lib32-expat 2.1.0-2
lib32-fakeroot 1.20.2-1
lib32-flac 1.3.1-1
lib32-flashplugin 11.2.202.457-1
lib32-fontconfig 2.11.1-1
lib32-freetype2 2.5.5-1
lib32-gcc-libs 4.9.2-4
lib32-gdk-pixbuf2 2.31.3-2
lib32-gettext 0.19.4-1
lib32-giflib 5.1.1-1
lib32-glew 1.12.0-1
lib32-glib2 2.44.0-1
lib32-glibc 2.21-2
lib32-glu 9.0.0-2
lib32-gmp 6.0.0-1
lib32-gnutls 3.4.0-2
lib32-gsm 1.0.13-9
lib32-gtk2 2.24.27-1
lib32-harfbuzz 0.9.40-2
lib32-icu 55.1-1
lib32-jack 0.124.1-1
lib32-json-c 0.12-1
lib32-keyutils 1.5.9-1
lib32-krb5 1.13.1-1
lib32-lcms2 2.6-1
lib32-libaio 0.3.110-1
lib32-libasyncns 0.8-7
lib32-libcanberra 0.30-4
lib32-libcap 2.24-1
lib32-libcl 1.1-1
lib32-libcups 2.0.2-2
lib32-libdbus 1.8.16-1
lib32-libdrm 2.4.60-1
lib32-libffi 3.2.1-1
lib32-libgcrypt 1.6.3-1
lib32-libgpg-error 1.18-1
lib32-libice 1.0.9-1
lib32-libidn 1.30-1
lib32-libjpeg-turbo 1.4.0-1
lib32-libldap 2.4.40-1
lib32-libltdl 2.4.5-1
lib32-libnl 3.2.25-1
lib32-libogg 1.3.2-1
lib32-libpcap 1.6.2-1
lib32-libpciaccess 0.13.4-1
lib32-libpng 1.6.16-1
lib32-libpulse 6.0-1
lib32-libsamplerate 0.1.8-2
lib32-libsm 1.2.2-1
lib32-libsndfile 1.0.25-3
lib32-libssh2 1.5.0-1
lib32-libtasn1 4.4-1
lib32-libtiff 4.0.3-3
lib32-libtxc_dxtn 1.0.1-5
lib32-libusb 1.0.19-1
lib32-libvorbis 1.3.5-1
lib32-libx11 1.6.3-1
lib32-libxau 1.0.8-1
lib32-libxcb 1.11-1
lib32-libxcomposite 0.4.4-2
lib32-libxcursor 1.1.14-1
lib32-libxdamage 1.1.4-2
lib32-libxdmcp 1.1.2-1
lib32-libxext 1.3.3-1
lib32-libxfixes 5.0.1-1
lib32-libxft 2.3.2-1
lib32-libxi 1.7.4-1
lib32-libxinerama 1.1.3-1
lib32-libxml2 2.9.2-1
lib32-libxmu 1.1.2-1
lib32-libxrandr 1.4.2-1
lib32-libxrender 0.9.8-1
lib32-libxshmfence 1.2-1
lib32-libxslt 1.1.28-2
lib32-libxt 1.1.4-1
lib32-libxtst 1.2.2-1
lib32-libxxf86vm 1.1.4-1
lib32-llvm-libs 3.6.0-1
lib32-mesa 10.5.4-1
lib32-mpg123 1.22.1-1
lib32-ncurses 5.9-3
lib32-nettle 3.1.1-1
lib32-nspr 4.10.8-1
lib32-nss 3.18-1
lib32-nvidia-libgl 349.16-1
lib32-nvidia-utils 349.16-1
lib32-openal 1.16.0-1
lib32-openssl 1.0.2.a-1
lib32-p11-kit 0.23.1-2
lib32-pango 1.36.8-1
lib32-pcre 8.36-1
lib32-pixman 0.32.6-1
lib32-portaudio 19_20140130-1
lib32-readline 6.3.008-1
lib32-sdl 1.2.15-6
lib32-soundtouch 1.8.0-1
lib32-sqlite 3.8.9-1
lib32-systemd 219-1
lib32-tdb 1.3.4-1
lib32-util-linux 2.26.1-1
lib32-v4l-utils 1.6.0-1
lib32-wayland 1.7.0-1
lib32-wxgtk 3.0.2-4
lib32-xz 5.2.1-1
lib32-zlib 1.2.8-1
libabw 0.1.1-1
libaio 0.3.110-1
libao 1.2.0-1
libarchive 3.1.2-8
libart-lgpl 2.3.21-3
libass 0.12.1-1
libassuan 2.2.0-1
libasyncns 0.8-5
libatasmart 0.19-3
libatomic_ops 7.4.2-1
libavc1394 0.5.4-2
libbluray 0.8.0-1
libbsd 0.7.0-1
libcaca 0.99.beta18-2
libcanberra 0.30-5
libcanberra-pulse 0.30-5
libcap 2.24-2
libcap-ng 0.7.4-1
libcddb 1.3.2-4
libcdio 0.93-1
libcdio-paranoia 10.2+0.93+1-1
libcdr 0.1.1-2
libcl 1.1-4
libcroco 0.6.8-2
libcue 1.4.0-4
libcups 2.0.2-4
libdaemon 0.14-3
libdatrie 0.2.8-1
libdbus 1.8.16-2
libdca 0.0.5-4
libdrm 2.4.60-2
libdv 1.0.0-6
libdvbpsi 1:1.1.2-1
libdvdcss 1.3.0-1
libdvdnav 5.0.2-1
libdvdread 5.0.1-1
libe-book 0.1.2-2
libebml 1.3.1-1
libedit 20150325_3.1-1
libepoxy 1.2-2
libetonyek 0.1.1-1
libev 4.19-1
libevdev 1.4.2-1
libevent 2.0.22-1
libexif 0.6.21-2
libffi 3.2.1-1
libfontenc 1.1.3-1
libftdi-compat 0.20-1
libgcrypt 1.6.3-2
libgcrypt15 1.5.4-4
libgdm 3.16.1.1-1
libgee 0.18.0-1
libglade 2.6.4-5
libgme 0.6.0-3
libgnome-keyring 3.12.0-2
libgnomekbd 3.6.0-2
libgpg-error 1.19-1
libgpod 0.8.3-4
libgssglue 0.4-2
libgsystem 2015.1-1
libgtop 2.30.0-1
libgusb 0.2.4-1
libgweather 3.16.1-1
libgxps 0.2.2-3
libibus 1.5.10-1
libical 1.0.1-2
libice 1.0.9-1
libid3tag 0.15.1b-8
libidn 1.30-1
libiec61883 1.2.0-4
libimobiledevice 1.2.0-1
libinput 0.14.1-1
libirman 0.4.5-4
libjpeg-turbo 1.4.0-1
libkate 0.4.1-5
libksba 1.3.3-1
liblastfm 1.0.9-1
libldap 2.4.40-2
liblqr 0.4.2-1
libmaa 1.3.2-2
libmad 0.15.1b-7
libmatroska 1.4.2-1
libmediainfo 0.7.73-1
libmikmod 3.3.7-1
libmm-glib 1.4.6-1
libmms 0.6.4-1
libmng 2.0.2-3
libmodplug 0.8.8.5-1
libmp4v2 2.0.0-3
libmpc 1.0.3-1
libmpcdec 1.2.6-4
libmpeg2 0.5.1-5
libmspub 0.1.2-2
libmtp 1.1.8-1
libmwaw 0.3.4-1
libmygpo-qt 1.0.8-1
libndp 1.4-1
libnewt 0.52.18-2
libnl 3.2.25-1
libnm-glib 1.0.0-2
libnotify 0.7.6-1
liboauth 1.0.3-1
libodfgen 0.1.3-1
libofa 0.9.3-5
libogg 1.3.2-1
libomxil-bellagio 0.9.3-1
libpagemaker 0.0.2-1
libpaper 1.1.24-7
libpcap 1.6.2-1
libpciaccess 0.13.4-1
libpipeline 1.4.0-1
libplist 1.12-1
libpng 1.6.16-1
libproxy 0.4.11-5
libpulse 6.0-1
libpwquality 1.2.3-1
libquvi 0.9.4-3
libquvi-scripts 0.9.20131130-2
libqzeitgeist 0.8.0-4
libraw 0.16.0-3
libraw1394 2.1.0-2
libreoffice-fresh 4.4.2-1
librevenge 0.0.2-1
librpcsecgss 0.19-8
librsvg 1:2.40.9-1
libsamplerate 0.1.8-3
libsasl 2.1.26-7
libseccomp 2.2.0-1
libsecret 0.18-1
libshout 1:2.3.1-2
libsidplay 1.36.59-6
libsigc++ 2.4.1-1
libsigsegv 2.10-2
libsm 1.2.2-2
libsndfile 1.0.25-3
libsodium 1.0.2-1
libsoup 2.50.0-1
libspectre 0.2.7-2
libsrtp 15.1c9bd90-3
libssh 0.6.5-1
libssh2 1.5.0-1
libsystemd 219-6
libtar 1.2.20-2
libtasn1 4.4-1
libteam 1.14-2
libthai 0.1.21-1
libtheora 1.1.1-3
libtiff 4.0.3-5
libtiger 0.3.4-4
libtirpc 0.2.5-1
libtool 2.4.6-1
libtxc_dxtn 1.0.1-6
libunibreak 1.1-1
libunistring 0.9.5-1
libunwind 1.1-2
libupnp 1.6.19-1
libusb 1.0.19-1
libusb-compat 0.1.5-1
libusbmuxd 1.0.10-1
libutempter 1.1.6-2
libutil-linux 2.26.1-3
libva 1.5.1-1
libvdpau 1.1-1
libvisio 0.1.1-2
libvisual 0.4.0-5
libvorbis 1.3.5-1
libvpx 1.4.0-2
libwacom 0.11-1
libwbclient 4.2.1-1
libwebp 0.4.3-1
libwmf 0.2.8.4-12
libwpd 0.10.0-1
libwpg 0.3.0-1
libwps 0.3.1-1
libx11 1.6.3-1
libx264 2:144.20150223-1
libx86 1.1-4
libx86emu 1.1.23.1-1
libxau 1.0.8-2
libxaw 1.0.13-1
libxcb 1.11-1
libxcomposite 0.4.4-2
libxcursor 1.1.14-2
libxdamage 1.1.4-2
libxdg-basedir 1.2.0-3
libxdmcp 1.1.2-1
libxext 1.3.3-1
libxfixes 5.0.1-1
libxfont 1.5.1-1
libxft 2.3.2-1
libxi 1.7.4-1
libxinerama 1.1.3-2
libxkbcommon 0.5.0-1
libxkbcommon-x11 0.5.0-1
libxkbfile 1.0.9-1
libxklavier 5.4-1
libxml2 2.9.2-2
libxmu 1.1.2-1
libxp 1.0.3-1
libxpm 3.5.11-1
libxrandr 1.4.2-2
libxrender 0.9.9-1
libxshmfence 1.2-1
libxslt 1.1.28-3
libxss 1.2.2-2
libxt 1.1.5-1
libxtst 1.2.2-1
libxv 1.0.10-1
libxvmc 1.0.9-1
libxxf86dga 1.1.4-1
libxxf86vm 1.1.4-1
libyaml 0.1.6-1
libzen 0.4.31-1
libzip 0.11.2-1
licenses 20140629-1
links 2.9-1
linux 3.19.3-3
linux-api-headers 3.18.5-1
linux-firmware 20150410.ec89525-1
lirc 1:0.9.2.a-1
llvm-libs 3.6.0-5
lm_sensors 3.3.5-1
logrotate 3.8.9-1
lpsolve 5.5.2.0-3
lrzip 0.621-1
lua 5.2.4-1
lua-bitop 1.0.2-5
lua-expat 1.3.0-1
lua-lgi 0.8.0-2
lua-socket 3.0rc1-4
lua51 5.1.5-4
luajit 2.0.3-3
lvm2 2.02.116-1
lxdream 0.9.1-3
lz4 128-1
lzo 2.09-1
m4 1.4.17-1
make 4.1-1
man-db 2.7.1-1
man-pages 3.83-1
mcomix 1.01-1
mcpp 2.7.2-5
mdadm 3.3.2-1
memtest86+ 5.01-1
mencoder 37379-3
mesa 10.5.4-1
metamorphose2 0.8.3-2
mime-types 9-1
minitube 2.4-1
mjpegtools 2.1.0-1
mkinitcpio 18-2
mkinitcpio-busybox 1.21.1-2
mkvtoolnix-cli 7.8.0-3
mobile-broadband-provider-info 20120614-2
morituri-git 0.2.3.r3.gb1d685f-1
mozilla-common 1.4-4
mpfr 3.1.2.p11-1
mpg123 1.22.1-1
mplayer 37379-3
mtdev 1.1.5-1
mutagen 1.28-1
mutter 3.16.1.1-1
ncurses 5.9-7
nemo 2.4.5-1
neon 0.30.1-1
net-snmp 5.7.3-1
netctl 1.10-2
nettle 3.1.1-1
network-manager-applet 1.0.0-2
networkmanager 1.0.0-2
nfs-utils 1.3.2-6
nfsidmap 0.26-1
nm-connection-editor 1.0.0-2
npth 1.2-1
nspr 4.10.8-1
nss 3.18-3
ntfs-3g 2015.3.14-1
nvidia 349.16-1
nvidia-libgl 349.16-1
nvidia-utils 349.16-1
ogmtools 1.5-5
openal 1.16.0-1
opencore-amr 0.1.3-2
openjpeg 1.5.2-1
openmpi 1.8.4-1
openresolv 3.6.1-1
openssh 6.8p1-2
openssl 1.0.2.a-1
opus 1.1-1
orc 0.4.23-1
os-prober 1.64-1
p11-kit 0.23.1-2
p7zip 9.38.1-3
package-query 1.5-2
pacman 4.2.1-1
pacman-mirrorlist 20150315-1
pacmatic 20150126-1
pam 1.1.8-5
pambase 20130928-1
pango 1.36.8-1
pangomm 2.36.0-1
par2cmdline-tbb 20141125-1
parallel 20150322-1
parted 3.2-2
patch 2.7.5-1
pciutils 3.3.1-1
pcmciautils 018-7
pcre 8.36-2
pcsx2-git 1.3.1.r978.1aebca3-1
perl 5.20.2-1
perl-clone 0.37-2
perl-data-dump 1.22-1
perl-dbi 1.633-1
perl-encode-locale 1.04-1
perl-error 0.17023-1
perl-file-basedir 0.07-1
perl-file-listing 6.04-2
perl-file-which 1.09-4
perl-html-parser 3.71-3
perl-html-tagset 3.20-4
perl-http-cookies 6.01-2
perl-http-daemon 6.01-2
perl-http-date 6.02-2
perl-http-message 6.06-2
perl-http-negotiate 6.01-2
perl-ipc-system-simple 1.25-1
perl-libwww 6.08-1
perl-locale-gettext 1.05-11
perl-lwp-mediatypes 6.02-2
perl-net-http 6.07-1
perl-uri 1.67-1
perl-www-robotrules 6.02-2
perl-xml-libxml 2.0121-1
perl-xml-namespacesupport 1.11-3
perl-xml-sax 0.99-4
perl-xml-sax-base 1.08-3
phonon-qt4 4.8.3-1
phonon-qt4-gstreamer 4.8.2-1
phoronix-test-suite 5.6.0-1
php 5.6.8-2
pinentry 0.9.1-1
pixman 0.32.6-1
pkg-config 0.28-2
pkgfile 15-1
pms 1.90.1-1
podofo 0.9.3-1
polkit 0.112-2
poppler 0.32.0-1
poppler-glib 0.32.0-1
poppler-qt5 0.32.0-1
popt 1.16-7
portaudio 19_20140130-1
presentproto 1.0-1
printproto 1.0.5-3
procps-ng 3.3.10-2
protobuf 2.6.1-1
psmisc 22.21-2
pth 2.0.7-5
pulseaudio 6.0-1
pulseaudio-alsa 2-3
pv 1.6.0-1
pygobject-devel 3.16.1-1
pygobject2-devel 2.28.6-11
pygtk 2.24.0-5
pyqt4-common 4.11.3-4
pyqt5-common 5.4.1-2
python 3.4.3-2
python-dateutil 2.4.1-1
python-dbus 1.2.0-4
python-dbus-common 1.2.0-4
python-gmpy2 2.0.5-2
python-gobject 3.16.1-1
python-html2text 2015.4.14-1
python-matplotlib 1.4.3-2
python-mpmath 0.19-1
python-nose 1.3.6-1
python-numexpr 2.4.3-1
python-numpy 1.9.2-2
python-pandas 0.16.0-2
python-pygments 2.0.2-2
python-pyparsing 2.0.3-1
python-pyqt4 4.11.3-4
python-pyqt5 5.4.1-2
python-pytz 2015.2-1
python-pyzmq 14.5.0-2
python-scipy 0.15.1-2
python-setuptools 1:15.2-1
python-sip 4.16.7-1
python-six 1.9.0-1
python-sympy 0.7.6-2
python-tornado 4.1.0-2
python-xdg 0.25-2
python2 2.7.9-1
python2-apsw 3.8.9-1
python2-atspi 2.16.0-1
python2-beaker 1.7.0-1
python2-cairo 1.10.0-2
python2-chardet 2.3.0-1
python2-cherrypy 3.6.0-1
python2-cssselect 0.9.1-2
python2-cssutils 1.0-2
python2-dateutil 2.4.1-1
python2-dbus 1.2.0-4
python2-dnspython 1.12.0-1
python2-gobject 3.16.1-1
python2-gobject2 2.28.6-11
python2-html5lib 0.999-5
python2-lxml 3.4.4-1
python2-mako 1.0.1-1
python2-markupsafe 0.23-2
python2-mechanize 0.2.5-4
python2-netifaces 0.10.4-1
python2-pillow 2.8.1-1
python2-psutil 2.2.1-2
python2-pycdio 0.20-3
python2-pygments 2.0.2-2
python2-pyqt5 5.4.1-2
python2-setuptools 1:15.2-1
python2-sip 4.16.7-1
python2-six 1.9.0-1
python2-xdg 0.25-2
qca 2.0.3-5
qca-ossl 2.0.0-7
qjson 0.8.1-3
qpdf 5.1.2-1
qt4 4.8.6-5
qt5-base 5.4.1-4
qt5-declarative 5.4.1-4
qt5-location 5.4.1-4
qt5-script 5.4.1-4
qt5-sensors 5.4.1-4
qt5-svg 5.4.1-4
qt5-tools 5.4.1-4
qt5-translations 5.4.1-4
qt5-webchannel 5.4.1-4
qt5-webkit 5.4.1-4
qt5-xmlpatterns 5.4.1-4
qtchooser 48-1
qtwebkit 2.3.4-1
randrproto 1.4.1-1
raptor 2.0.15-2
rasqal 1:0.9.32-1
readline 6.3.008-1
recode 3.6-8
recordproto 1.14.2-2
redland 1:1.0.17-2
reflector 2014.11-1
reiserfsprogs 3.6.24-1
renderproto 0.11.1-3
resourceproto 1.2.0-3
rest 0.7.93-1
rhash 1.3.3-1
rng-tools 5-3
rpcbind 0.2.3-1
rsync 3.1.1-2
rtkit 0.11-5
rtmpdump 20140918-2
ruby 2.2.2-1
s-nail 14.8.0-1
sbc 1.3-1
schroedinger 1.0.11-2
scrnsaverproto 1.2.2-2
sdcv 0.4.2-8
sdl 1.2.15-7
sdl_image 1.2.12-3
sdl_mixer 1.2.12-4
sdl_net 1.2.8-2
sdl_ttf 2.0.11-3
sed 4.2.2-3
sg3_utils 1.40-1
shadow 4.2.1-3
shared-color-targets 0.1.5-1
shared-mime-info 1.4-1
sip 4.16.7-1
slang 2.3.0-1
smartmontools 6.3-2
smbclient 4.2.1-1
smpeg 0.4.5-1
snappy 1.1.1-1
sound-theme-freedesktop 0.8-2
soundtouch 1.8.0-1
spandsp 0.0.6-1
speech-dispatcher 0.8.1-1
speedtest-cli 0.3.1-1
speex 1.2rc2-1
speexdsp 1.2rc3-1
spotify 0.9.17.1-1
spotify-gnome-git 20141010-1
sqlite 3.8.9-1
startup-notification 0.12-4
steam 1.0.0.49-3
sudo 1.8.13-1
suitesparse 4.4.4-1
sysfsutils 2.1.0-9
systemd 219-6
systemd-sysvcompat 219-6
t1lib 5.1.2-5
taglib 1.9.1-1
talloc 2.1.2-1
tar 1.28-1
tdb 1.3.4-1
telepathy-glib 0.24.1-1
telepathy-logger 0.8.1-1
telepathy-mission-control 5.16.3-1
terminology 0.8.0-1
tevent 0.9.24-1
texinfo 5.2-3
texlive-bin 2014.34260-7
texlive-core 2014.36709-1
texlive-langchinese 2014.35921-1
texlive-langcjk 2014.0-1
texlive-langjapanese 2014.36466-1
texlive-langkorean 2014.36573-1
texlive-latexextra 2014.36706-1
texlive-pictures 2014.36605-1
texlive-science 2014.36659-1
texmaker 4.4.1-1
thin-provisioning-tools 0.4.1-1
thunderbird 31.6.0-2
tinyxml 2.6.2-3
tmux 1.9_a-2
totem-plparser 3.10.4-1
transmission-gtk 2.84-1
tsmuxer 1.10.6-14
ttf-dejavu 2.34-2
ttf-ms-fonts 2.0-10
tzdata 2015d-1
udisks2 2.1.5-1
unrar 1:5.2.7-1
unzip 6.0-10
upower 0.99.2-2
usbutils 008-1
util-linux 2.26.1-3
v4l-utils 1.6.2-1
vi 1:050325-4
videoproto 2.3.2-1
vim 7.4.712-1
vim-latexsuite 20130126-2
vim-runtime 7.4.712-1
vlc 2.2.1-2
vte-common 0.40.0-2
vte3 0.40.0-2
wavpack 4.70.0-2
wayland 1.7.0-1
webkit2gtk 2.8.1-1
webkitgtk 2.4.8-2
webrtc-audio-processing 0.1-2
wesnoth 1.12.2-2
wesnoth-data 1.12.2-1
wget 1.16.3-1
which 2.21-1
wildmidi 0.3.8-1
wine 1.7.42-2
winetricks 20141130-1
wireless_tools 30.pre9-1
wpa_supplicant 1:2.3-1
wxgtk 3.0.2-4
wxgtk2.8 2.8.12.1-3
wxpython 3.0.2.0-1
wxpython2.8 2.8.12.1-1
x265 1.6-1
xboxdrv 0.8.5-3
xcb-proto 1.11-1
xcb-util 0.4.0-1
xcb-util-cursor 0.1.2-1
xcb-util-image 0.4.0-1
xcb-util-keysyms 0.4.0-1
xcb-util-renderutil 0.3.9-1
xcb-util-wm 0.4.1-1
xdg-su 1.2.3-1
xdg-utils 1.1.0.git20150323-1
xdiskusage 1.51-1
xextproto 7.3.0-1
xf86-input-evdev 2.9.2-1
xf86dgaproto 2.1-3
xf86driproto 2.1.1-3
xf86vidmodeproto 2.3.1-3
xfsprogs 3.2.2-1
xineramaproto 1.2.1-3
xkeyboard-config 2.14-1
xorg-appres 1.0.4-1
xorg-bdftopcf 1.0.5-1
xorg-font-util 1.3.1-1
xorg-font-utils 7.6-4
xorg-fonts-alias 1.0.3-1
xorg-fonts-encodings 1.0.4-4
xorg-fonts-misc 1.0.3-3
xorg-iceauth 1.0.7-1
xorg-mkfontdir 1.0.7-2
xorg-mkfontscale 1.1.2-1
xorg-server 1.17.1-5
xorg-server-common 1.17.1-5
xorg-server-devel 1.17.1-5
xorg-server-utils 7.6-4
xorg-sessreg 1.1.0-1
xorg-setxkbmap 1.3.1-1
xorg-util-macros 1.19.0-1
xorg-xauth 1.0.9-1
xorg-xbacklight 1.2.1-1
xorg-xcmsdb 1.0.5-1
xorg-xgamma 1.0.6-1
xorg-xhost 1.0.7-1
xorg-xinit 1.3.4-2
xorg-xinput 1.6.1-1
xorg-xkbcomp 1.3.0-1
xorg-xmessage 1.0.4-2
xorg-xmodmap 1.0.9-1
xorg-xrandr 1.4.3-1
xorg-xrdb 1.1.0-1
xorg-xrefresh 1.0.5-1
xorg-xset 1.2.3-1
xorg-xsetroot 1.1.1-2
xproto 7.0.27-1
xscreensaver 5.32-1
xvidcore 1.3.3-1
xz 5.2.1-1
yajl 2.1.0-1
yaourt 1.5-1
zenity 3.14.0-1
zeromq 4.0.5-1
zita-alsa-pcmi 0.2.0-2
zita-resampler 1.3.0-3
zlib 1.2.8-3
zvbi 0.2.35-1
zziplib 0.13.62-2
[edit5] My /etc/modules-load.d directory is empty by the way, and "sudo /usr/lib/systemd/systemd-modules-load" returns nothing. Note, this is all while running Linux 3.19, but I believe it should demonstrate that I don't have any special modules running. Or so I believe.
Last edited by nstgc (2015-05-04 13:16:09) -
Different program's sound sent to different jack ports with Pulseaudio
Hello,
I just installed Pulseaudio so I could send the output of different programs to different jacks on my computer, both the jacks on my computer are provided by the same motherboard sound card, one on the front for my headphone and one on the back. So far I haven't been able to see them in pavucontrol I only see a single output.
Here's the output of "pacmd list"
Welcome to PulseAudio! Use "help" for usage information.
>>> Memory blocks currently allocated: 530, size: 1.2 MiB.
Memory blocks allocated during the whole lifetime: 4140720, size: 2.1 GiB.
Memory blocks imported from other processes: 125, size: 550.6 KiB.
Memory blocks exported to other processes: 1, size: 512 B.
Total sample cache size: 0 B.
Default sample spec: s16le 2ch 44100Hz
Default channel map: front-left,front-right
Default sink name: alsa_output.pci-0000_00_1b.0.analog-stereo
Default source name: alsa_input.pci-0000_00_1b.0.analog-stereo
Memory blocks of type POOL: 404 allocated/2532098 accumulated.
Memory blocks of type POOL_EXTERNAL: 1 allocated/651424 accumulated.
Memory blocks of type APPENDED: 0 allocated/0 accumulated.
Memory blocks of type USER: 0 allocated/0 accumulated.
Memory blocks of type FIXED: 0 allocated/1302521 accumulated.
Memory blocks of type IMPORTED: 125 allocated/306101 accumulated.
27 module(s) loaded.
index: 0
name: <module-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "2.1"
index: 1
name: <module-stream-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "2.1"
index: 2
name: <module-card-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "2.1"
index: 3
name: <module-augment-properties>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "2.1"
index: 4
name: <module-alsa-card>
argument: <device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes card_properties="module-udev-detect.discovered=1">
used: 6
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "2.1"
index: 5
name: <module-udev-detect>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "2.1"
index: 6
name: <module-jackdbus-detect>
argument: <>
used: -1
load once: yes
properties:
module.author = "David Henningsson"
module.description = "Adds JACK sink/source ports when JACK is started"
module.version = "2.1"
index: 7
name: <module-bluetooth-discover>
argument: <>
used: -1
load once: yes
properties:
module.author = "Joao Paulo Rechi Vita"
module.description = "Detect available bluetooth audio devices and load bluetooth audio drivers"
module.version = "2.1"
index: 8
name: <module-esound-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "ESOUND protocol (UNIX sockets)"
module.version = "2.1"
index: 9
name: <module-native-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "2.1"
index: 10
name: <module-gconf>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "GConf Adapter"
module.version = "2.1"
index: 11
name: <module-default-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "2.1"
index: 12
name: <module-rescue-streams>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move their streams to the default sink/source"
module.version = "2.1"
index: 13
name: <module-always-sink>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.version = "2.1"
index: 14
name: <module-intended-roles>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based of intended roles of devices"
module.version = "2.1"
index: 15
name: <module-suspend-on-idle>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "2.1"
index: 16
name: <module-console-kit>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of this user"
module.version = "2.1"
index: 17
name: <module-systemd-login>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "2.1"
index: 18
name: <module-position-event-sounds>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "2.1"
index: 19
name: <module-role-cork>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "2.1"
index: 20
name: <module-filter-heuristics>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "2.1"
index: 21
name: <module-filter-apply>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "2.1"
index: 22
name: <module-dbus-protocol>
argument: <>
used: -1
load once: yes
properties:
module.author = "Tanu Kaskinen"
module.description = "D-Bus interface"
module.version = "2.1"
index: 23
name: <module-switch-on-port-available>
argument: <>
used: -1
load once: no
properties:
index: 24
name: <module-x11-publish>
argument: <display=:0.0>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "2.1"
index: 25
name: <module-x11-xsmp>
argument: <display=:0.0 session_manager=local/archpc:@/tmp/.ICE-unix/15374,unix/archpc:/tmp/.ICE-unix/15374>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "X11 session management"
module.version = "2.1"
index: 26
name: <module-cli-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Command line interface protocol (UNIX sockets)"
module.version = "2.1"
1 sink(s) available.
index: 7
name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: RUNNING
suspend cause:
priority: 9959
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: yes
current latency: 19.31 ms
max request: 3 KiB
max rewind: 344 KiB
monitor source: 8
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 3
configured latency: 20.00 ms; range is 0.50 .. 2000.00 ms
card: 0 <alsa_card.pci-0000_00_1b.0>
module: 4
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC888 Analog"
alsa.id = "ALC888 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xfbff8000 irq 45"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC888"
alsa.components = "HDA:10ec0888,1458a002,00100001"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output: Analog Output (priority 9900, available: unknown)
properties:
analog-output-headphones: Headphones (priority 9000, available: yes)
properties:
active port: <analog-output-headphones>
2 source(s) available.
index: 8
name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause:
priority: 1950
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 344 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 2
linked by: 2
configured latency: 20.00 ms; range is 0.50 .. 2000.00 ms
monitor_of: 7
card: 0 <alsa_card.pci-0000_00_1b.0>
module: 4
properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xfbff8000 irq 45"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
index: 10
name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause:
priority: 9959
volume: 0: 10% 1: 10%
0: -60.00 dB 1: -60.00 dB
balance 0.00
base volume: 10%
-60.00 dB
volume steps: 65537
muted: no
current latency: 0.09 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 20.00 ms; range is 1.00 .. 2000.00 ms
card: 0 <alsa_card.pci-0000_00_1b.0>
module: 4
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC888 Analog"
alsa.id = "ALC888 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xfbff8000 irq 45"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC888"
alsa.components = "HDA:10ec0888,1458a002,00100001"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-input-microphone-front: Front Microphone (priority 8500, available: no)
properties:
analog-input-microphone-rear: Rear Microphone (priority 8200, available: no)
properties:
analog-input-linein: Line In (priority 8100, available: no)
properties:
active port: <analog-input-microphone-front>
9 client(s) logged in.
index: 0
driver: <module-systemd-login.c>
owner module: 17
properties:
application.name = "Login Session 2"
systemd-login.session = "2"
index: 3
driver: <module-x11-xsmp.c>
owner module: 25
properties:
application.name = "XSMP Session on xfce4-session as 276d8dfaf-2e31-425c-a448-6e95e23c73a0"
xsmp.vendor = "xfce4-session"
xsmp.client.id = "276d8dfaf-2e31-425c-a448-6e95e23c73a0"
index: 13
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "wrapper"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "15869"
application.process.user = "jordan"
application.process.host = "archpc"
application.process.binary = "wrapper"
window.x11.display = ":0.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "3cb559c10be41c9a438615f400000947"
index: 14
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "wrapper"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "15869"
application.process.user = "jordan"
application.process.host = "archpc"
application.process.binary = "wrapper"
window.x11.display = ":0.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "3cb559c10be41c9a438615f400000947"
index: 15
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "wrapper"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "15869"
application.process.user = "jordan"
application.process.host = "archpc"
application.process.binary = "wrapper"
window.x11.display = ":0.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "3cb559c10be41c9a438615f400000947"
index: 32
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "1.0"
application.process.id = "20106"
application.process.user = "jordan"
application.process.host = "archpc"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id = "3cb559c10be41c9a438615f400000947"
index: 40
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
window.x11.display = ":0.0"
window.x11.screen = "0"
application.process.id = "20106"
application.process.user = "jordan"
application.process.host = "archpc"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
application.process.machine_id = "3cb559c10be41c9a438615f400000947"
application.icon_name = "multimedia-volume-control"
index: 57
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "Clementine"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "15910"
application.process.user = "jordan"
application.process.host = "archpc"
application.process.binary = "clementine"
application.language = "en_US.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id = "3cb559c10be41c9a438615f400000947"
application.icon_name = "application-x-clementine"
index: 58
driver: <cli.c>
owner module: 26
properties:
application.name = "UNIX socket client"
1 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_1b.0>
driver: <module-alsa-card.c>
owner module: 4
properties:
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xfbff8000 irq 45"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:analog-stereo: Analog Stereo Output (priority 6000)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060)
output:analog-stereo+input:iec958-stereo: Analog Stereo Output + Digital Stereo (IEC958) Input (priority 6055)
output:analog-surround-40: Analog Surround 4.0 Output (priority 700)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (priority 760)
output:analog-surround-40+input:iec958-stereo: Analog Surround 4.0 Output + Digital Stereo (IEC958) Input (priority 755)
output:analog-surround-41: Analog Surround 4.1 Output (priority 800)
output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (priority 860)
output:analog-surround-41+input:iec958-stereo: Analog Surround 4.1 Output + Digital Stereo (IEC958) Input (priority 855)
output:analog-surround-50: Analog Surround 5.0 Output (priority 700)
output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (priority 760)
output:analog-surround-50+input:iec958-stereo: Analog Surround 5.0 Output + Digital Stereo (IEC958) Input (priority 755)
output:analog-surround-51: Analog Surround 5.1 Output (priority 800)
output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (priority 860)
output:analog-surround-51+input:iec958-stereo: Analog Surround 5.1 Output + Digital Stereo (IEC958) Input (priority 855)
output:analog-surround-71: Analog Surround 7.1 Output (priority 700)
output:analog-surround-71+input:analog-stereo: Analog Surround 7.1 Output + Analog Stereo Input (priority 760)
output:analog-surround-71+input:iec958-stereo: Analog Surround 7.1 Output + Digital Stereo (IEC958) Input (priority 755)
output:iec958-stereo: Digital Stereo (IEC958) Output (priority 5500)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (priority 5560)
output:iec958-stereo+input:iec958-stereo: Digital Stereo Duplex (IEC958) (priority 5555)
input:analog-stereo: Analog Stereo Input (priority 60)
input:iec958-stereo: Digital Stereo (IEC958) Input (priority 55)
off: Off (priority 0)
active profile: <output:analog-stereo+input:analog-stereo>
sinks:
alsa_output.pci-0000_00_1b.0.analog-stereo/#7: Built-in Audio Analog Stereo
sources:
alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#8: Monitor of Built-in Audio Analog Stereo
alsa_input.pci-0000_00_1b.0.analog-stereo/#10: Built-in Audio Analog Stereo
ports:
analog-output: Analog Output (priority 9900, available: unknown)
properties:
analog-output-headphones: Headphones (priority 9000, available: yes)
properties:
analog-input-microphone-front: Front Microphone (priority 8500, available: no)
properties:
analog-input-microphone-rear: Rear Microphone (priority 8200, available: no)
properties:
analog-input-linein: Line In (priority 8100, available: no)
properties:
iec958-stereo-input: iec958-stereo-input (priority 0, available: unknown)
properties:
iec958-stereo-output: Digital Output (S/PDIF) (priority 0, available: unknown)
properties:
1 sink input(s) available.
index: 90
driver: <protocol-native.c>
flags: START_CORKED
state: RUNNING
sink: 7 <alsa_output.pci-0000_00_1b.0.analog-stereo>
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
muted: no
current latency: 89.86 ms
requested latency: 90.00 ms
sample spec: float32le 2ch 44100Hz
channel map: front-left,front-right
Stereo
resample method: copy
module: 9
client: 57 <Clementine>
properties:
media.name = "'Summertime' by 'Sex Bob-omb'"
application.name = "Clementine"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "15910"
application.process.user = "jordan"
application.process.host = "archpc"
application.process.binary = "clementine"
application.language = "en_US.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id = "3cb559c10be41c9a438615f400000947"
application.icon_name = "application-x-clementine"
module-stream-restore.id = "sink-input-by-application-name:Clementine"
media.title = "Summertime"
media.artist = "Sex Bob-omb"
3 source outputs(s) available.
index: 48
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 8 <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
volume: 0: 100%
0: 0.00 dB
balance 0.00
muted: no
current latency: 9.68 ms
requested latency: 20.00 ms
sample spec: float32le 1ch 25Hz
channel map: mono
Mono
resample method: peaks
owner module: 9
client: 32 <PulseAudio Volume Control>
properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "1.0"
application.process.id = "20106"
application.process.user = "jordan"
application.process.host = "archpc"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id = "3cb559c10be41c9a438615f400000947"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
index: 51
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 10 <alsa_input.pci-0000_00_1b.0.analog-stereo>
volume: 0: 10%
0: -60.00 dB
balance 0.00
muted: no
current latency: 0.00 ms
requested latency: 20.00 ms
sample spec: float32le 1ch 25Hz
channel map: mono
Mono
resample method: peaks
owner module: 9
client: 32 <PulseAudio Volume Control>
properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "1.0"
application.process.id = "20106"
application.process.user = "jordan"
application.process.host = "archpc"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id = "3cb559c10be41c9a438615f400000947"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
index: 58
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 8 <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
volume: 0: 100%
0: 0.00 dB
balance 0.00
muted: no
current latency: 9.71 ms
requested latency: 20.00 ms
sample spec: float32le 1ch 25Hz
channel map: mono
Mono
resample method: peaks
owner module: 9
client: 32 <PulseAudio Volume Control>
direct on input: 90
properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "1.0"
application.process.id = "20106"
application.process.user = "jordan"
application.process.host = "archpc"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id = "3cb559c10be41c9a438615f400000947"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
0 cache entrie(s) available.
Thanks!Did you ever figure this out? I am in the same situation and cannot figure out how to refer to specific ports on the same motherboard.
https://wiki.archlinux.org/index.php/Pu … ont.2Frear looks promising. However I forget whether one of my cords is plugged in to the rear jack or the center jack, and moving my desktop to look is a little involved. Oh well, next time the need arises I will experiment further.
Last edited by rosshadden (2014-03-06 03:22:47) -
[Solved] Bluetooth A2DP source to pulseaudio OR ALSA
Edit
So, I'm happy to say that I have it working to some degree!
I wasn't happy with the default bluez tools, but I managed to find a useful set of tools which seemed to work better: http://gitorious.org/bluez-tools/bluez-tools/
I compiled and make'd them, then created the following startup script to set up everything in the order it is needed for the next part to work: https://gist.github.com/c990e397388bd4399a15
I made a file called bluetoothPin in the home directory with the following in it:
<My phone's MAC (without the angle brackets)> <A Pin Number>
The bt-agent command in the startup.sh script uses that file to authorise connections. I aim to modify it to allow any connection to connect with the same pin, I'll get into that later.
For the actual streaming, I installed qt so I could get the qdbus binary, then I followed the instructions here: http://ubuntuforums.org/showthread.php? … st10492742
That code worked, so I modified it a little so that it would wait for a connection, then make the connection, then wait for a new connection on disconnect: https://gist.github.com/8e32a9cf786995c00f2f
It's not perfect; things get a bit iffy when you try to pair and then connect a device without rebooting the pi: It disconnects gracefully, and it pairs correctly, but pulse doesn't seem to re-add it to its list, so it's no longer identified by my script. Also I haven't figured out how to pair any device against the same pin code yet. Any help with that would be awesome!
Hi there,
I'm trying to build a bluetooth audio receiver server for my car! I have a raspberry pi with arch installed on it, bluez set up and configured (I can pair my phone with it through the bluez-simple-agent, although I think I'll have to write my own pairing daemon to auto-pair anything that attempts to connect).
Baby steps though: I've got bluez all set up as I mentioned earlier, but pulse doesn't seem to "see" the bluetooth connection. I'm not sure exactly what information you guys need to help me, but I've tried to add everything I could think of:
[root@alarmpi ~]# tail /var/log/messages.log
Oct 20 18:25:22 alarmpi bluetoothd[112]: bluetoothd[112]: Endpoint registered: sender=:1.4 path=/MediaEndpoint/A2DPSource
Oct 20 18:25:22 alarmpi bluetoothd[112]: bluetoothd[112]: Endpoint registered: sender=:1.4 path=/MediaEndpoint/A2DPSink
Oct 20 18:25:22 alarmpi bluetoothd[112]: Endpoint registered: sender=:1.4 path=/MediaEndpoint/HFPAG
Oct 20 18:25:22 alarmpi bluetoothd[112]: Endpoint registered: sender=:1.4 path=/MediaEndpoint/HFPHS
Oct 20 18:25:22 alarmpi bluetoothd[112]: Endpoint registered: sender=:1.4 path=/MediaEndpoint/A2DPSource
Oct 20 18:25:22 alarmpi bluetoothd[112]: Endpoint registered: sender=:1.4 path=/MediaEndpoint/A2DPSink
Oct 20 18:25:22 alarmpi pulseaudio[165]: [pulseaudio] server-lookup.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
Oct 20 18:25:22 alarmpi pulseaudio[165]: [pulseaudio] main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
Oct 20 18:39:57 alarmpi systemd[1]: Starting Cleanup of Temporary Directories...
Oct 20 18:39:57 alarmpi systemd[1]: Started Cleanup of Temporary Directories.
[root@alarmpi ~]#
This is interesting... to me it looks like bluetoothd is registering with pulse here.
[root@alarmpi ~]# pactl list
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "2.1"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "2.1"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "2.1"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "2.1"
Module #4
Name: module-alsa-card
Argument: device_id="0" name="platform-bcm2835_AUD0.0" card_name="alsa_card.platform-bcm2835_AUD0.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "2.1"
Module #5
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "2.1"
Module #6
Name: module-bluetooth-discover
Argument:
Usage counter: n/a
Properties:
module.author = "Joao Paulo Rechi Vita"
module.description = "Detect available bluetooth audio devices and load bluetooth audio drivers"
module.version = "2.1"
Module #7
Name: module-esound-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "ESOUND protocol (UNIX sockets)"
module.version = "2.1"
Module #8
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "2.1"
Module #9
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "2.1"
Module #10
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move their streams to the default sink/source"
module.version = "2.1"
Module #11
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.version = "2.1"
Module #12
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based of intended roles of devices"
module.version = "2.1"
Module #13
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "2.1"
Module #14
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of this user"
module.version = "2.1"
Module #15
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "2.1"
Module #16
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "2.1"
Module #17
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "2.1"
Module #18
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "2.1"
Module #19
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "2.1"
Module #20
Name: module-dbus-protocol
Argument:
Usage counter: n/a
Properties:
module.author = "Tanu Kaskinen"
module.description = "D-Bus interface"
module.version = "2.1"
Module #21
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
Sink #0
State: SUSPENDED
Name: alsa_output.platform-bcm2835_AUD0.0.analog-stereo
Description: bcm2835 ALSA Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 4
Mute: no
Volume: 0: 86% 1: 86%
0: -4.00 dB 1: -4.00 dB
balance 0.00
Base Volume: 86%
-4.00 dB
Monitor Source: alsa_output.platform-bcm2835_AUD0.0.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "bcm2835 ALSA"
alsa.id = "bcm2835 ALSA"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "bcm2835 ALSA"
alsa.long_card_name = "bcm2835 ALSA"
alsa.driver_name = "snd_bcm2835"
device.bus_path = "platform-bcm2835_AUD0.0"
sysfs.path = "/devices/platform/bcm2835_AUD0.0/sound/card0"
device.string = "hw:0"
device.buffering.buffer_size = "17632"
device.buffering.fragment_size = "4416"
device.access_mode = "serial"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "bcm2835 ALSA Analog Stereo"
alsa.mixer_name = "Broadcom Mixer"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
Ports:
analog-output: Analog Output (priority: 9900)
Active Port: analog-output
Formats:
pcm
Source #0
State: SUSPENDED
Name: alsa_output.platform-bcm2835_AUD0.0.analog-stereo.monitor
Description: Monitor of bcm2835 ALSA Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 4
Mute: no
Volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
Base Volume: 100%
0.00 dB
Monitor of Sink: alsa_output.platform-bcm2835_AUD0.0.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of bcm2835 ALSA Analog Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "bcm2835 ALSA"
alsa.long_card_name = "bcm2835 ALSA"
alsa.driver_name = "snd_bcm2835"
device.bus_path = "platform-bcm2835_AUD0.0"
sysfs.path = "/devices/platform/bcm2835_AUD0.0/sound/card0"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
Formats:
pcm
Client #0
Driver: module-systemd-login.c
Owner Module: 15
Properties:
application.name = "Login Session c1"
systemd-login.session = "c1"
Client #2
Driver: protocol-native.c
Owner Module: 8
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "253"
application.process.user = "root"
application.process.host = "alarmpi"
application.process.binary = "pactl"
application.language = "C"
application.process.machine_id = "5c49cb5bf08724338eb09a6900092bb0"
Card #0
Name: alsa_card.platform-bcm2835_AUD0.0
Driver: module-alsa-card.c
Owner Module: 4
Properties:
alsa.card = "0"
alsa.card_name = "bcm2835 ALSA"
alsa.long_card_name = "bcm2835 ALSA"
alsa.driver_name = "snd_bcm2835"
device.bus_path = "platform-bcm2835_AUD0.0"
sysfs.path = "/devices/platform/bcm2835_AUD0.0/sound/card0"
device.string = "0"
device.description = "bcm2835 ALSA"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
Profiles:
output:analog-mono: Analog Mono Output (sinks: 1, sources: 0, priority. 100)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority. 6000)
off: Off (sinks: 0, sources: 0, priority. 0)
Active Profile: output:analog-stereo
Ports:
analog-output: Analog Output (priority: 9900)
Part of profile(s): output:analog-mono, output:analog-stereo
[root@alarmpi ~]# cat /etc/bluetooth/audio.conf
# Configuration file for the audio service
# This section contains options which are not specific to any
# particular interface
[General]
Enable=Source
# Switch to master role for incoming connections (defaults to true)
#Master=true
# If we want to disable support for specific services
# Defaults to supporting all implemented services
#Disable=Gateway,Source,Socket
# SCO routing. Either PCM or HCI (in which case audio is routed to/from ALSA)
# Defaults to HCI
#SCORouting=PCM
# Automatically connect both A2DP and HFP/HSP profiles for incoming
# connections. Some headsets that support both profiles will only connect the
# other one automatically so the default setting of true is usually a good
# idea.
#AutoConnect=true
# Headset interface specific options (i.e. options which affect how the audio
# service interacts with remote headset devices)
[Headset]
# Set to true to support HFP, false means only HSP is supported
# Defaults to true
HFP=true
# Maximum number of connected HSP/HFP devices per adapter. Defaults to 1
MaxConnected=1
# Set to true to enable use of fast connectable mode (faster page scanning)
# for HFP when incoming call starts. Default settings are restored after
# call is answered or rejected. Page scan interval is much shorter and page
# scan type changed to interlaced. Such allows faster connection initiated
# by a headset.
FastConnectable=false
# Just an example of potential config options for the other interfaces
#[A2DP]
SBCSources=1
MPEG12Sources=0
[root@alarmpi ~]# cat /etc/asound.conf
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
# vim:set ft=alsaconf:
About my project in general:
I want to be able to do the following:
- Give pulseaudio access to the bluetooth device, and use the A2DP protocol to receive the audio. From my research, it is possible, but I'm not sure how.
- Open up bluez so that I can pair any device by connecting with "1234" for the auth, then it will automatically check for A2DP and give that information to pulse
The idea being that any bluetooth device can pair without any interaction from the raspberry pi, and then pulse will have access to all of the devices which are playing music.
1] Is this even possible?
2] Can I use alsa instead as it seems it'd be easier/lighter to manage?
3] Are there any documents other than arch's bluetooth and pulse wikis that I can read to help me figure this out?
Last edited by s0l1dsnak3123 (2012-10-20 23:53:01)Actually I've solved it myself by looking at the wiki page I posted.
I am not sure about what you said but PulseAudio doesn't require ALSA (alsa-lib, alsa-utils, sort of) to play sound except when with those applications that do not have direct support (now even Flash have that). But maybe the drivers for sound cards in Linux kernel could be said as a part of ALSA, then I am not sure about those stuff.
Last edited by tom.yan (2011-08-11 06:47:35) -
[SOLVED] Speaker volume set to 0 when PulseAudio starts
Hi guys,
last pacman -Syu which I've run on February 1, 2013 brought some terrible bugs to me. E.g. the CPU fan is running permanently at full speed. Another one ist that the level of the speaker channel is set to zero every time PulseAudio starts, see attached picture:
It's related to this bugs:
1. https://bugs.freedesktop.org/show_bug.cgi?id=59217
2. https://bugs.freedesktop.org/show_bug.cgi?id=54673
3. https://bugs.launchpad.net/ubuntu/+sour … bug/921397
The fix for the first bug didn't work for me (modifying /usr/share/pulseaudio/alsa-mixer/paths/analog-output-speaker-always.conf). As in the first bug report, I also have a Dell XPS L502X.
pacman -Syu upgraded pulseaudio from 2.1-1 to 3.0-2, see pacman.log:
[2013-02-01 20:46] Running 'pacman -Syu'
[2013-02-01 20:46] synchronizing package lists
[2013-02-01 20:46] starting full system upgrade
[2013-02-01 21:57] removed nss-myhostname (0.3-3)
[2013-02-01 21:57] upgraded acl (2.2.51-2 -> 2.2.51-3)
[2013-02-01 21:57] ==> Füge Schlüssel aus archlinux.gpg hinzu ...
[2013-02-01 21:57] upgraded archlinux-keyring (20121113-1 -> 20130127-1)
[2013-02-01 21:57] upgraded linux-api-headers (3.6.3-1 -> 3.7.4-1)
[2013-02-01 21:57] upgraded filesystem (2012.12-1 -> 2013.01-3)
[2013-02-01 21:57] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
[2013-02-01 21:57] Generating locales...
[2013-02-01 21:57] de_DE.UTF-8... done
[2013-02-01 21:57] Generation complete.
[2013-02-01 21:57] upgraded glibc (2.16.0-5 -> 2.17-3)
[2013-02-01 21:57] upgraded bash (4.2.039-1 -> 4.2.042-3)
[2013-02-01 21:57] upgraded automake (1.12.5-1 -> 1.13.1-1)
[2013-02-01 21:57] upgraded pixman (0.28.0-1 -> 0.28.2-1)
[2013-02-01 21:57] upgraded cairo (1.12.8-2 -> 1.12.12-1)
[2013-02-01 21:57] upgraded libxi (1.6.1-1 -> 1.6.2-1)
[2013-02-01 21:57] upgraded libxcomposite (0.4.3-2 -> 0.4.4-1)
[2013-02-01 21:57] upgraded libxdamage (1.1.3-2 -> 1.1.4-1)
[2013-02-01 21:57] upgraded gcc-libs (4.7.2-2 -> 4.7.2-4)
[2013-02-01 21:57] upgraded icu (50.1-2 -> 50.1.2-1)
[2013-02-01 21:57] upgraded freetype2 (2.4.10-1 -> 2.4.11-2)
[2013-02-01 21:57] upgraded graphite (1:1.0.3-1 -> 1:1.2.0-1)
[2013-02-01 21:57] upgraded harfbuzz (0.9.9-1 -> 0.9.9-3)
[2013-02-01 21:57] upgraded pango (1.32.4-1 -> 1.32.5-1)
[2013-02-01 21:57] upgraded sqlite (3.7.14.1-1 -> 3.7.15.2-1)
[2013-02-01 21:57] upgraded kbd (1.15.3-3 -> 1.15.5-3)
[2013-02-01 21:57] upgraded shadow (4.1.5.1-2 -> 4.1.5.1-4)
[2013-02-01 21:57] upgraded util-linux (2.22.1-3 -> 2.22.2-1)
[2013-02-01 21:57] ==> Persistent net naming rules have been shipped as disabled.
[2013-02-01 21:57] See /etc/udev/rules.d/80-net-name-slot.rules for more detail
[2013-02-01 21:57] upgraded systemd (196-2 -> 197-4)
[2013-02-01 21:57] upgraded colord (0.1.24-3 -> 0.1.28-1)
[2013-02-01 21:57] upgraded gtk3 (3.6.2-1 -> 3.6.4-1)
[2013-02-01 21:57] upgraded desktop-file-utils (0.20-1 -> 0.21-1)
[2013-02-01 21:57] upgraded baobab (3.6.3-1 -> 3.6.4-1)
[2013-02-01 21:57] upgraded binutils (2.23.1-1 -> 2.23.1-3)
[2013-02-01 21:57] upgraded bison (2.6.5-1 -> 2.7-1)
[2013-02-01 21:57] upgraded boost-libs (1.50.0-3 -> 1.52.0-1)
[2013-02-01 21:57] upgraded tcl (8.5.13-1 -> 8.6.0-3)
[2013-02-01 21:57] upgraded brltty (4.4-1 -> 4.4-3)
[2013-02-01 21:57] upgraded findutils (4.4.2-4 -> 4.4.2-5)
[2013-02-01 21:57] upgraded sed (4.2.1-4 -> 4.2.2-2)
[2013-02-01 21:57] upgraded ca-certificates (20121105-1 -> 20130119-1)
[2013-02-01 21:57] upgraded cantarell-fonts (0.0.11-3 -> 0.0.12-1)
[2013-02-01 21:57] upgraded krb5 (1.10.3-1 -> 1.11-2)
[2013-02-01 21:57] upgraded libwbclient (3.6.9-1 -> 3.6.12-1)
[2013-02-01 21:57] upgraded cifs-utils (5.7-1 -> 5.9-1)
[2013-02-01 21:57] upgraded isl (0.11-1 -> 0.11.1-1)
[2013-02-01 21:57] upgraded gmp (5.0.5-1 -> 5.1.0-1)
[2013-02-01 21:57] upgraded cloog (0.17.0-2 -> 0.18.0-1)
[2013-02-01 21:57] upgraded gstreamer (1.0.3-1 -> 1.0.5-1)
[2013-02-01 21:57] upgraded gst-plugins-base-libs (1.0.3-1 -> 1.0.5-1)
[2013-02-01 21:57] upgraded clutter-gst (1.9.92-1 -> 2.0.0-1)
[2013-02-01 21:57] upgraded clutter-gtk (1.4.0-1 -> 1.4.2-1)
[2013-02-01 21:57] upgraded colord-gtk (0.1.23-1 -> 0.1.24-1)
[2013-02-01 21:57] ===> cpupower startup config file moved to /etc/default/cpupower
[2013-02-01 21:57] upgraded cpupower (3.7-2 -> 3.7-5)
[2013-02-01 21:57] upgraded cracklib (2.8.19-1 -> 2.8.22-1)
[2013-02-01 21:57] upgraded cronie (1.4.9-1 -> 1.4.9-2)
[2013-02-01 21:57]
[2013-02-01 21:57] (gconftool-2:10138): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
[2013-02-01 21:57] Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
[2013-02-01 21:57]
[2013-02-01 21:57] (gconftool-2:10145): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
[2013-02-01 21:57] Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
[2013-02-01 21:57] upgraded dasher (4.10.1-3 -> 4.11-1)
[2013-02-01 21:57] upgraded dhcpcd (5.6.3-2 -> 5.6.4-1)
[2013-02-01 21:57] upgraded dialog (1.1_20120706-1 -> 1.2_20121230-1)
[2013-02-01 21:57] upgraded dosfstools (3.0.13-1 -> 3.0.13-2)
[2013-02-01 21:57]
[2013-02-01 21:57] (gconftool-2:10153): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
[2013-02-01 21:57] Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
[2013-02-01 21:57]
[2013-02-01 21:57] (gconftool-2:10160): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
[2013-02-01 21:57] Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
[2013-02-01 21:57] upgraded ekiga (4.0.0-1 -> 4.0.0-2)
[2013-02-01 21:57] upgraded json-c (0.9-1 -> 0.10-2)
[2013-02-01 21:57] upgraded libpulse (2.1-1 -> 3.0-2)
[2013-02-01 21:57] upgraded libsoup (2.40.2-1 -> 2.40.3-1)
[2013-02-01 21:57] upgraded libdrm (2.4.40-1 -> 2.4.41-1)
[2013-02-01 21:57] upgraded libglapi (9.0.1-1 -> 9.0.2-1)
[2013-02-01 21:57] upgraded libgl (9.0.1-1 -> 9.0.2-1)
[2013-02-01 21:57] upgraded webkitgtk3 (1.10.2-1 -> 1.10.2-2)
[2013-02-01 21:57] upgraded empathy (3.6.2-1 -> 3.6.3-1)
[2013-02-01 21:58] upgraded enca (1.13-2 -> 1.14-1)
[2013-02-01 21:58] upgraded nspr (4.9.3-1 -> 4.9.4-1)
[2013-02-01 21:58] upgraded nss (3.14-1 -> 3.14.1.1.93-1)
[2013-02-01 21:58] upgraded evolution-data-server (3.6.2-1 -> 3.6.3-1)
[2013-02-01 21:58] upgraded gtkhtml4 (4.6.1-1 -> 4.6.2-1)
[2013-02-01 21:58] upgraded libpst (0.6.54-2 -> 0.6.54-3)
[2013-02-01 21:58] upgraded evolution (3.6.2-1 -> 3.6.3-1)
[2013-02-01 21:58] upgraded file (5.11-1 -> 5.11-2)
[2013-02-01 21:58] upgraded firefox (17.0.1-1 -> 18.0.1-1)
[2013-02-01 21:58] upgraded flashplugin (11.2.202.258-1 -> 11.2.202.261-1)
[2013-02-01 21:58] upgraded fribidi (0.19.4-1 -> 0.19.5-1)
[2013-02-01 21:58] upgraded gawk (4.0.1-1 -> 4.0.2-1)
[2013-02-01 21:58] upgraded gcc (4.7.2-2 -> 4.7.2-4)
[2013-02-01 21:58] upgraded gcc-fortran (4.7.2-2 -> 4.7.2-4)
[2013-02-01 21:58] upgraded gettext (0.18.1.1-4 -> 0.18.2-1)
[2013-02-01 21:58] upgraded perl-error (0.17018-1 -> 0.17019-1)
[2013-02-01 21:58] upgraded git (1.8.0.2-1 -> 1.8.1.2-1)
[2013-02-01 21:58] upgraded gnome-color-manager (3.6.0-1 -> 3.6.1-1)
[2013-02-01 21:58] upgraded gnome-menus (3.6.1-1 -> 3.6.2-1)
[2013-02-01 21:58] installed sbc (1.0-1)
[2013-02-01 21:58] warning: /etc/pulse/daemon.conf installed as /etc/pulse/daemon.conf.pacnew
[2013-02-01 21:58] >>> If you have per-user copies of configuration files (such as client.conf,
[2013-02-01 21:58] daemon.conf or default.pa) in ~/.pulse/, make sure you keep them in sync
[2013-02-01 21:58] with changes to the packaged files in /etc/pulse/. Otherwise, PulseAudio
[2013-02-01 21:58] may refuse to start due to configuration errors.
[2013-02-01 21:58] upgraded pulseaudio (2.1-1 -> 3.0-2)
[2013-02-01 21:58] upgraded upower (0.9.18-2 -> 0.9.19-1)
[2013-02-01 21:58] upgraded gnome-settings-daemon (3.6.3-2 -> 3.6.4-1)
[2013-02-01 21:58] upgraded gnupg (2.0.19-3 -> 2.0.19-5)
[2013-02-01 21:58] upgraded gzip (1.5-1 -> 1.5-2)
[2013-02-01 21:58] upgraded texinfo (4.13a-7 -> 4.13a-8)
[2013-02-01 21:58] upgraded libtasn1 (3.1-1 -> 3.2-1)
[2013-02-01 21:58] upgraded nettle (2.5-1 -> 2.6-1)
[2013-02-01 21:58] upgraded gnutls (3.1.5-1 -> 3.1.6-1)
[2013-02-01 21:58] upgraded xine-lib (1.2.2-3 -> 1.2.2-5)
[2013-02-01 21:58] gtk-update-icon-cache: Cache file created successfully.
[2013-02-01 21:58] upgraded gogglesmm (0.12.6-2 -> 0.12.7-1)
[2013-02-01 21:58] upgraded gpgme (1.3.1-4 -> 1.3.1-5)
[2013-02-01 21:58] upgraded grep (2.14-1 -> 2.14-2)
[2013-02-01 21:58] upgraded soundtouch (1.6.0-1 -> 1.7.1-1)
[2013-02-01 21:58] upgraded gst-plugins-bad (1.0.3-1 -> 1.0.4-1)
[2013-02-01 21:58] upgraded gst-plugins-base (1.0.3-1 -> 1.0.5-1)
[2013-02-01 21:58] upgraded gst-plugins-good (1.0.3-1 -> 1.0.5-1)
[2013-02-01 21:58] upgraded libcdio (0.83-1 -> 0.90-2)
[2013-02-01 21:58] installed libcdio-paranoia (10.2+0.90-1)
[2013-02-01 21:58] upgraded libsoup-gnome (2.40.2-1 -> 2.40.3-1)
[2013-02-01 21:58] upgraded udisks2 (2.0.0-1 -> 2.0.1-1)
[2013-02-01 21:58] upgraded gvfs (1.14.2-2 -> 1.14.2-3)
[2013-02-01 21:58] upgraded gvfs-gphoto2 (1.14.2-2 -> 1.14.2-3)
[2013-02-01 21:58] upgraded imagemagick (6.8.0.7-1 -> 6.8.2.0-1)
[2013-02-01 21:58] upgraded obex-data-server (0.4.6-3 -> 0.4.6-4)
[2013-02-01 21:58] upgraded gvfs-obexftp (1.14.2-2 -> 1.14.2-3)
[2013-02-01 21:58] upgraded hdf5 (1.8.8-1 -> 1.8.10-1)
[2013-02-01 21:58] upgraded hwloc (1.6-1 -> 1.6.1-1)
[2013-02-01 21:58] upgraded intel-dri (9.0.1-1 -> 9.0.2-1)
[2013-02-01 21:58] upgraded iptables (1.4.16.2-1 -> 1.4.16.3-1)
[2013-02-01 21:58] upgraded iputils (20121126-1 -> 20121221-1)
[2013-02-01 21:58] upgraded jre7-openjdk-headless (7.u9_2.3.3-1 -> 7.u9_2.3.4-1)
[2013-02-01 21:58] upgraded xdg-utils (1.1.0.git20121008-1 -> 1.1.0.git20121008-2)
[2013-02-01 21:58] upgraded jre7-openjdk (7.u9_2.3.3-1 -> 7.u9_2.3.4-1)
[2013-02-01 21:58] upgraded jdk7-openjdk (7.u9_2.3.3-1 -> 7.u9_2.3.4-1)
[2013-02-01 21:58] upgraded khrplatform-devel (9.0.1-1 -> 9.0.2-1)
[2013-02-01 21:58] upgraded libao (1.1.0-2 -> 1.1.0-3)
[2013-02-01 21:58] upgraded libass (0.10.0-3 -> 0.10.1-1)
[2013-02-01 21:58] upgraded libdiscid (0.2.2-2 -> 0.3.0-1)
[2013-02-01 21:58] upgraded libxcb (1.9-1 -> 1.9-2)
[2013-02-01 21:58] upgraded libgbm (9.0.1-1 -> 9.0.2-1)
[2013-02-01 21:58] upgraded libegl (9.0.1-1 -> 9.0.2-1)
[2013-02-01 21:58] upgraded libgee (0.6.6.1-1 -> 0.6.7-1)
[2013-02-01 21:58] upgraded liblouis (2.3.0-1 -> 2.5.2-1)
[2013-02-01 21:58] installed gstreamer0.10-good (0.10.31-1)
[2013-02-01 21:58] installed farstream-0.1 (0.1.2-2)
[2013-02-01 21:58] upgraded libpurple (2.10.6-2 -> 2.10.6-4)
[2013-02-01 21:59] upgraded libreoffice-de (3.6.4-1 -> 3.6.5-1)
[2013-02-01 21:59] upgraded python2 (2.7.3-3 -> 2.7.3-4)
[2013-02-01 21:59] upgraded raptor (2.0.8-2 -> 2.0.8-3)
[2013-02-01 21:59] upgraded redland (1:1.0.15-3 -> 1:1.0.16-1)
[2013-02-01 21:59] upgraded libreoffice-common (3.6.4-1 -> 3.6.5-1)
[2013-02-01 21:59] upgraded libreoffice-calc (3.6.4-1 -> 3.6.5-1)
[2013-02-01 21:59] upgraded libreoffice-gnome (3.6.4-1 -> 3.6.5-1)
[2013-02-01 21:59] upgraded libreoffice-writer (3.6.4-1 -> 3.6.5-1)
[2013-02-01 21:59] upgraded libtracker-sparql (0.14.4-2 -> 0.14.4-3)
[2013-02-01 21:59] upgraded libupnp (1.6.17-1 -> 1.6.18-1)
[2013-02-01 21:59] upgraded mkinitcpio (0.12.0-2 -> 0.12.0-3)
[2013-02-01 21:59] >>> Updating module dependencies. Please wait ...
[2013-02-01 21:59] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-02-01 21:59] ==> Building image from preset: 'default'
[2013-02-01 21:59] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-02-01 21:59] ==> Starting build: 3.7.5-1-ARCH
[2013-02-01 21:59] -> Running build hook: [base]
[2013-02-01 21:59] -> Running build hook: [udev]
[2013-02-01 21:59] -> Running build hook: [autodetect]
[2013-02-01 21:59] -> Running build hook: [modconf]
[2013-02-01 21:59] -> Running build hook: [block]
[2013-02-01 21:59] -> Running build hook: [filesystems]
[2013-02-01 21:59] -> Running build hook: [usbinput]
[2013-02-01 21:59] -> Running build hook: [fsck]
[2013-02-01 21:59] ==> ERROR: file not found: `fsck.btrfs'
[2013-02-01 21:59] ==> WARNING: No fsck helpers found. fsck will not be run on boot.
[2013-02-01 21:59] ==> Generating module dependencies
[2013-02-01 21:59] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-02-01 21:59] ==> WARNING: errors were encountered during the build. The image may not be complete.
[2013-02-01 21:59] ==> Building image from preset: 'fallback'
[2013-02-01 21:59] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-02-01 21:59] ==> Starting build: 3.7.5-1-ARCH
[2013-02-01 21:59] -> Running build hook: [base]
[2013-02-01 21:59] -> Running build hook: [udev]
[2013-02-01 21:59] -> Running build hook: [modconf]
[2013-02-01 21:59] -> Running build hook: [block]
[2013-02-01 21:59] -> Running build hook: [filesystems]
[2013-02-01 21:59] -> Running build hook: [usbinput]
[2013-02-01 21:59] -> Running build hook: [fsck]
[2013-02-01 21:59] ==> Generating module dependencies
[2013-02-01 21:59] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-02-01 21:59] ==> Image generation successful
[2013-02-01 21:59] upgraded linux (3.6.10-1 -> 3.7.5-1)
[2013-02-01 21:59] upgraded linux-headers (3.6.10-1 -> 3.7.5-1)
[2013-02-01 21:59] upgraded lirc-utils (1:0.9.0-34 -> 1:0.9.0-36)
[2013-02-01 21:59] upgraded man-pages (3.44-1 -> 3.46-1)
[2013-02-01 21:59] upgraded mesa (9.0.1-1 -> 9.0.2-1)
[2013-02-01 21:59] upgraded mpfr (3.1.1.p2-1 -> 3.1.1.p2-2)
[2013-02-01 21:59] upgraded ttf-dejavu (2.33-3 -> 2.33-4)
[2013-02-01 21:59] upgraded smbclient (3.6.9-1 -> 3.6.12-1)
[2013-02-01 21:59] upgraded mplayer (35421-1 -> 35421-2)
[2013-02-01 21:59] upgraded nodejs (0.8.15-1 -> 0.8.18-2)
[2013-02-01 21:59] installed libcl (1.1-3)
[2013-02-01 21:59] upgraded opencv (2.4.3-3 -> 2.4.3-4)
[2013-02-01 21:59] upgraded python2-xdg (0.23-2 -> 0.25-1)
[2013-02-01 21:59] upgraded orca (3.6.2-1 -> 3.6.3-1)
[2013-02-01 21:59] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2013-02-01 21:59] upgraded pacman-mirrorlist (20121128-1 -> 20130131-1)
[2013-02-01 21:59] upgraded pambase (20120701-1 -> 20130113-1)
[2013-02-01 21:59] upgraded patch (2.7.1-1 -> 2.7.1-2)
[2013-02-01 21:59] upgraded pcmciautils (018-5 -> 018-6)
[2013-02-01 21:59] upgraded phonon-gstreamer (4.6.2-1 -> 4.6.3-1)
[2013-02-01 21:59] upgraded pidgin (2.10.6-2 -> 2.10.6-4)
[2013-02-01 21:59] upgraded pkg-config (0.27.1-1 -> 0.28-1)
[2013-02-01 21:59] upgraded poppler (0.20.5-1 -> 0.22.0-1)
[2013-02-01 21:59] upgraded poppler-glib (0.20.5-1 -> 0.22.0-1)
[2013-02-01 22:00] upgraded qt (4.8.4-1 -> 4.8.4-2)
[2013-02-01 22:00] upgraded poppler-qt (0.20.5-1 -> 0.22.0-1)
[2013-02-01 22:00] upgraded python2-beaker (1.6.3-2 -> 1.6.4-1)
[2013-02-01 22:00] upgraded python2-docutils (0.9.1-2 -> 0.10-1)
[2013-02-01 22:00] upgraded python2-mako (0.7.2-2 -> 0.7.3-1)
[2013-02-01 22:00] upgraded qtwebkit (2.2.2-1 -> 2.3.beta1-1)
[2013-02-01 22:00] upgraded reiserfsprogs (3.6.21-4 -> 3.6.22-1)
[2013-02-01 22:00] upgraded ruby (1.9.3_p327-1 -> 1.9.3_p374-1)
[2013-02-01 22:00] upgraded sbt (0.12.1-2 -> 0.12.2-1)
[2013-02-01 22:00] upgraded scala (2.9.2-3 -> 2.10.0-1)
[2013-02-01 22:00] upgraded systemd-sysvcompat (196-2 -> 197-4)
[2013-02-01 22:00] >>> texlive: updating the filename database...
[2013-02-01 22:00] mktexlsr: Updating /etc/texmf/ls-R...
[2013-02-01 22:00] mktexlsr: Updating /usr/share/texmf/ls-R...
[2013-02-01 22:00] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2013-02-01 22:00] mktexlsr: Updating /var/lib/texmf/ls-R...
[2013-02-01 22:00] mktexlsr: Done.
[2013-02-01 22:01] recreating all formats... done.
[2013-02-01 22:01] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
[2013-02-01 22:01] upgraded texlive-bin (2012.0-5 -> 2012.0-7)
[2013-02-01 22:01] upgraded thunderbird (17.0-1 -> 17.0.2-1)
[2013-02-01 22:01] upgraded tk (8.5.13-1 -> 8.6.0-1)
[2013-02-01 22:01] upgraded tracker (0.14.4-2 -> 0.14.4-3)
[2013-02-01 22:01] upgraded ttf-freefont (20120503-1 -> 20120503-2)
[2013-02-01 22:01] upgraded v8 (3.14.0-1 -> 3.16.4.1-1)
[2013-02-01 22:01] upgraded valgrind (3.8.1-1 -> 3.8.1-2)
[2013-02-01 22:01] In order to use the new version, reload all virtualbox modules manually.
[2013-02-01 22:01] upgraded virtualbox-host-modules (4.2.4-2 -> 4.2.6-5)
[2013-02-01 22:01] upgraded virtualbox (4.2.4-2 -> 4.2.6-1)
[2013-02-01 22:01] upgraded vlc (2.0.5-1 -> 2.0.5-2)
[2013-02-01 22:01] upgraded which (2.20-5 -> 2.20-6)
[2013-02-01 22:01] warning: /etc/X11/xorg.conf.d/10-synaptics.conf saved as /etc/X11/xorg.conf.d/10-synaptics.conf.pacsave
[2013-02-01 22:01] upgraded xf86-input-synaptics (1.6.2-2 -> 1.6.3-1)
[2013-02-01 22:01] upgraded xf86-video-intel (2.20.15-1 -> 2.20.19-1)
[2013-02-01 22:01] upgraded xfsprogs (3.1.8-2 -> 3.1.10-1)
[2013-02-01 22:01] upgraded xkeyboard-config (2.7-1 -> 2.8-1)
[2013-02-01 22:01] upgraded xorg-bdftopcf (1.0.3-2 -> 1.0.4-1)
[2013-02-01 22:01] upgraded xorg-server-common (1.13.0.902-2 -> 1.13.2-1)
[2013-02-01 22:01] upgraded xorg-server (1.13.0.902-2 -> 1.13.2-1)
[2013-02-01 22:01] upgraded xorg-xev (1.2.0-1 -> 1.2.1-1)
[2013-02-01 22:01] upgraded xterm (287-2 -> 288-1)
A package downgrade of PulseAudio back to 2.1-1 doesn't work.
Maybe someone know how to fix it. Please inform me if you need additional information or if I should better open a bug report for this issue.
Thank you.
Last edited by Schwefelsaeure (2013-02-07 14:17:04)Thank you all for your help, especially adee. pulseaudio-git package from AUR solves the problem. Therefore, I think it's not necessary to open another bug report at https://bugs.freedesktop.org/describeco … PulseAudio.
-
[Solved]No sound anymore (ALSA/PulseAudio)
Ok so I have no idea why I have no sound anymore, I didn't install anything...
Anyway, that's what I've tried:
-Check if mixer are all up in alsamixer
-Try to play a bit with pavucontrol
-Reboot
-Rerun pulseaudio with verbose
-Mute and unmute with physical button (I don't know why but I used to get this problem and it used to be solved just doing this)
-Googgling and searching this forum
Here are some more info
Pulseaudio logs:
└┼─$─┤▶ pulseaudio -k; pulseaudio -vvvvv
E: [pulseaudio] main.c: Failed to kill daemon: No such process
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: RealtimeKit worked.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 5.0
D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option
D: [pulseaudio] main.c: Running on host: Linux x86_64 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014
D: [pulseaudio] main.c: Found 4 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
I: [pulseaudio] main.c: Machine ID is a3af3988434b49f3b8af2ab66eba685b.
I: [pulseaudio] main.c: Session ID is c1.
I: [pulseaudio] main.c: Using runtime directory /run/user/1001/pulse.
I: [pulseaudio] main.c: Using state directory /home/unkn0wn/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-5.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-device-volumes.tdb'
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-stream-volumes.tdb'
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-stream-volumes'.
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry4
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry5
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry6
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry7
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry8
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry9
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry10
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry11
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry12
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry13
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry14
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry15
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry16
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry17
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry18
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry19
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-card-database.tdb'
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-udev-detect.so': success
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes
D: [pulseaudio] module-udev-detect.c: Ignoring /devices/platform/thinkpad_acpi/sound/card29, because marked so.
I: [pulseaudio] module-udev-detect.c: Found 1 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-jackdbus-detect.so': success
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus c9a6328a5bfaef44136d134253502922 as :1.32
D: [pulseaudio] module-jackdbus-detect.c: jackdbus isn't running.
I: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #6; argument: "channels=2").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluetooth-policy.so': success
I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #7; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluetooth-discover.so': success
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluez5-discover.so': success
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus 54d6e91cb1d72b925a540cf453502907 as :1.40
I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #9; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluez4-discover.so': failure
I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #8; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-esound-protocol-unix.so': success
I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #10; argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #11; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-gconf.so': success
I: [pulseaudio] module.c: Loaded "module-gconf" (index: #12; argument: "").
I: [pulseaudio] module-default-device-restore.c: Saved default sink 'auto_null' not existent, not restoring default sink setting.
I: [pulseaudio] module-default-device-restore.c: Saved default source 'auto_null.monitor' not existent, not restoring default source setting.
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #13; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #14; argument: "").
D: [pulseaudio] module-always-sink.c: Autoloading null-sink as no other sinks detected.
I: [pulseaudio] module-device-restore.c: Restoring volume for sink auto_null: front-left: 99957 / 153%, front-right: 99957 / 153%
I: [pulseaudio] module-device-restore.c: Restoring mute state for sink auto_null.
I: [pulseaudio] sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: device.description = "Dummy Output"
I: [pulseaudio] sink.c: device.class = "abstract"
I: [pulseaudio] sink.c: device.icon_name = "audio-card"
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [pulseaudio] module-device-restore.c: Restoring mute state for source auto_null.monitor.
I: [pulseaudio] source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of Dummy Output"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
D: [null-sink] module-null-sink.c: Thread starting up
D: [pulseaudio] module-device-restore.c: Could not set format on sink auto_null
I: [pulseaudio] module.c: Loaded "module-null-sink" (index: #16; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #15; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #17; argument: "").
D: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #18; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-console-kit.so': success
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #19; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-systemd-login.so': success
I: [pulseaudio] client.c: Created 0 "Login Session c1"
D: [pulseaudio] module-systemd-login.c: Added new session c1
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #20; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #21; argument: "").
D: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role.
D: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork roles.
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #22; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #23; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #24; argument: "").
D: [pulseaudio] main.c: Got org.PulseAudio1!
D: [pulseaudio] main.c: Got org.pulseaudio.Server!
I: [pulseaudio] main.c: Daemon startup complete.
E: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files
I: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle f
└┼─$─┤▶ loginctl session-status c1
c1 - unkn0wn (1001)
Since: Thu 2014-04-17 21:18:58 CEST; 16min ago
Leader: 1048 (slim)
Seat: seat0; vc7
Display: :0.0
Remote: user root
Service: slim; type x11; class user
State: active
Unit: session-c1.scope
|-1048 /usr/bin/slim -nodaemon
|-2206 /usr/bin/openbox --startup /usr/lib/openbox/openbox-autostart OPENBOX
|-2214 dbus-launch --sh-syntax --exit-with-session
|-2215 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
|-2227 tint2
|-2230 xcompmgr -CfF
|-2231 volumeicon
|-2236 conky -q
|-2238 /usr/lib/at-spi2-core/at-spi-bus-launcher
|-2252 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --no...
|-2255 /usr/lib/at-spi2-core/at-spi2-registryd --use-gnome-session
|-2259 /usr/lib/gvfs/gvfsd
|-2263 /usr/lib/gvfs/gvfsd-fuse /run/user/1001/gvfs -f -o big_writes
|-2278 /usr/lib32/skype/skype
|-2320 /usr/lib/xfce4/notifyd/xfce4-notifyd
|-2322 /usr/lib/xfce4/xfconf/xfconfd
|-2376 firefox
|-2416 /usr/lib/virtualbox/VBoxXPCOMIPCD
-I see the mixer going up and down in pavucontrol if I play some music
└┼─$─┤▶ loginctl session-status c1
c1 - unkn0wn (1001)
Since: Thu 2014-04-17 21:18:58 CEST; 16min ago
Leader: 1048 (slim)
Seat: seat0; vc7
Display: :0.0
Remote: user root
Service: slim; type x11; class user
State: active
Unit: session-c1.scope
|-1048 /usr/bin/slim -nodaemon
|-2206 /usr/bin/openbox --startup /usr/lib/openbox/openbox-autostart OPENBOX
|-2214 dbus-launch --sh-syntax --exit-with-session
|-2215 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
|-2227 tint2
|-2230 xcompmgr -CfF
|-2231 volumeicon
|-2236 conky -q
|-2238 /usr/lib/at-spi2-core/at-spi-bus-launcher
|-2252 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --no...
|-2255 /usr/lib/at-spi2-core/at-spi2-registryd --use-gnome-session
|-2259 /usr/lib/gvfs/gvfsd
|-2263 /usr/lib/gvfs/gvfsd-fuse /run/user/1001/gvfs -f -o big_writes
|-2278 /usr/lib32/skype/skype
|-2320 /usr/lib/xfce4/notifyd/xfce4-notifyd
|-2322 /usr/lib/xfce4/xfconf/xfconfd
|-2376 firefox
|-2416 /usr/lib/virtualbox/VBoxXPCOMIPCD
└┼─$─┤▶ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: CX20590 Analog [CX20590 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
└┼─$─┤▶ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=PCH
HDA Intel PCH, CX20590 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
Front speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
hdmi:CARD=PCH,DEV=1
HDA Intel PCH, HDMI 1
HDMI Audio Output
hdmi:CARD=PCH,DEV=2
HDA Intel PCH, HDMI 2
HDMI Audio Output
Don't really know what else to provide...
About my setup it's a thinkpad t420 not plugged in any hdmi screen or simething like that
Thank you
Last edited by Truc (2014-04-19 13:15:28)└┼─$─┤▶ fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC0: unkn0wn 2231 F.... volumeicon
└┼─$─┤▶ speaker-test -c 2 -t wav -D plughw:0,0
speaker-test 1.0.27.2
Playback device is plughw:0,0
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Playback open error: -16,Device or resource busy
It says it's busy but I don't see anything that could use it. I quit skype before trying -
[Solved] No sound (using Gnome with Pulseaudio)
Hello,
I have an issue with my audio. Since yesterday it has not been working, as in no sound in my headphones
I updated gnome, cinnamon and linux yesterday. I did not however update pulseaudio or anything else alsa related (as far as I can tell).
Another possible cause could be switching from cinnamon to gnome which I did yesterday (I don't know when exactly my audio stopped working).
Other relevant facts:
-My mic is still working fine
-Using the Xonar DG sound card
-Nothing is muted in alsamixer
-not a hardware issue, working fine in dual boot windows
Pulse audio in verbose mode suggest that the issue is not pulseaudio (as does pavucontrol's visualization):
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 5.0
I: [pulseaudio] main.c: Page size is 4096 bytes
I: [pulseaudio] main.c: Machine ID is 16327981f21a4906af3310ebf24dab15.
I: [pulseaudio] main.c: Session ID is c1.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /home/username/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-5.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 MMXEXT
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/username/.config/pulse/16327981f21a4906af3310ebf24dab15-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/username/.config/pulse/16327981f21a4906af3310ebf24dab15-stream-volumes'.
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/username/.config/pulse/16327981f21a4906af3310ebf24dab15-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA NVidia/HDA NVidia.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA NVidia
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA NVidia use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA NVidia
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_01_00.1.
I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_01_00.1"
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device hdmi:0.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (HDMI)' (hdmi-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
I: [pulseaudio] sink.c: device.api = "alsa"
I: [pulseaudio] sink.c: device.class = "sound"
I: [pulseaudio] sink.c: alsa.class = "generic"
I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
I: [pulseaudio] sink.c: alsa.subdevice = "0"
I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c: alsa.device = "3"
I: [pulseaudio] sink.c: alsa.card = "0"
I: [pulseaudio] sink.c: alsa.card_name = "HDA NVidia"
I: [pulseaudio] sink.c: alsa.long_card_name = "HDA NVidia at 0xfeaf8000 irq 19"
I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] sink.c: device.bus_path = "pci-0000:01:00.1"
I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0"
I: [pulseaudio] sink.c: device.bus = "pci"
I: [pulseaudio] sink.c: device.vendor.id = "10de"
I: [pulseaudio] sink.c: device.vendor.name = "NVIDIA Corporation"
I: [pulseaudio] sink.c: device.product.id = "0e0a"
I: [pulseaudio] sink.c: device.product.name = "GK104 HDMI Audio Controller"
I: [pulseaudio] sink.c: device.string = "hdmi:0"
I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c: device.profile.name = "hdmi-stereo"
I: [pulseaudio] sink.c: device.profile.description = "Digital Stereo (HDMI)"
I: [pulseaudio] sink.c: device.description = "GK104 HDMI Audio Controller Digital Stereo (HDMI)"
I: [pulseaudio] sink.c: alsa.mixer_name = "Nvidia GPU 40 HDMI/DP"
I: [pulseaudio] sink.c: alsa.components = "HDA:10de0040,14622843,00100100"
I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of GK104 HDMI Audio Controller Digital Stereo (HDMI)"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: alsa.card = "0"
I: [pulseaudio] source.c: alsa.card_name = "HDA NVidia"
I: [pulseaudio] source.c: alsa.long_card_name = "HDA NVidia at 0xfeaf8000 irq 19"
I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:01:00.1"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "10de"
I: [pulseaudio] source.c: device.vendor.name = "NVIDIA Corporation"
I: [pulseaudio] source.c: device.product.id = "0e0a"
I: [pulseaudio] source.c: device.product.name = "GK104 HDMI Audio Controller"
I: [pulseaudio] source.c: device.string = "0"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="0" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0 (alsa_card.pci-0000_01_00.1) module loaded.
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/Xonar DG/Xonar DG.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card Xonar DG
I: [pulseaudio] (alsa-lib)main.c: error: failed to import Xonar DG use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card Xonar DG
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:1: Invalid argument
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:1: Invalid argument
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL iec958:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer iec958:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:1: Invalid argument
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround40:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround40:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround41:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround41:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround50:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround50:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround51:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround51:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround71:1: Invalid argument
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL iec958:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer iec958:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.CMI8786.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1: No such file or directory
I: [pulseaudio] module-card-restore.c: Restored profile 'output:analog-stereo+input:analog-stereo' for card alsa_card.pci-0000_03_07.0.
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_03_07.0.
I: [pulseaudio] card.c: Created 1 "alsa_card.pci-0000_03_07.0"
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device front:1.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] sink.c: Created sink 1 "alsa_output.pci-0000_03_07.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
I: [pulseaudio] sink.c: device.api = "alsa"
I: [pulseaudio] sink.c: device.class = "sound"
I: [pulseaudio] sink.c: alsa.class = "generic"
I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c: alsa.name = "Multichannel"
I: [pulseaudio] sink.c: alsa.id = "Multichannel"
I: [pulseaudio] sink.c: alsa.subdevice = "0"
I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c: alsa.device = "0"
I: [pulseaudio] sink.c: alsa.card = "1"
I: [pulseaudio] sink.c: alsa.card_name = "Xonar DG"
I: [pulseaudio] sink.c: alsa.long_card_name = "C-Media Oxygen HD Audio at 0xe800, irq 22"
I: [pulseaudio] sink.c: alsa.driver_name = "snd_oxygen"
I: [pulseaudio] sink.c: device.bus_path = "pci-0000:03:07.0"
I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card1"
I: [pulseaudio] sink.c: device.bus = "pci"
I: [pulseaudio] sink.c: device.vendor.id = "13f6"
I: [pulseaudio] sink.c: device.vendor.name = "C-Media Electronics Inc"
I: [pulseaudio] sink.c: device.product.id = "8788"
I: [pulseaudio] sink.c: device.product.name = "CMI8786 (Xonar DG)"
I: [pulseaudio] sink.c: device.string = "front:1"
I: [pulseaudio] sink.c: device.buffering.buffer_size = "352800"
I: [pulseaudio] sink.c: device.buffering.fragment_size = "352800"
I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c: device.profile.name = "analog-stereo"
I: [pulseaudio] sink.c: device.profile.description = "Analog Stereo"
I: [pulseaudio] sink.c: device.description = "CMI8786 (Xonar DG) Analog Stereo"
I: [pulseaudio] sink.c: alsa.mixer_name = "CMI8786"
I: [pulseaudio] sink.c: alsa.components = "CS4245 CMI8786"
I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] source.c: Created source 1 "alsa_output.pci-0000_03_07.0.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of CMI8786 (Xonar DG) Analog Stereo"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: alsa.card = "1"
I: [pulseaudio] source.c: alsa.card_name = "Xonar DG"
I: [pulseaudio] source.c: alsa.long_card_name = "C-Media Oxygen HD Audio at 0xe800, irq 22"
I: [pulseaudio] source.c: alsa.driver_name = "snd_oxygen"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:03:07.0"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card1"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "13f6"
I: [pulseaudio] source.c: device.vendor.name = "C-Media Electronics Inc"
I: [pulseaudio] source.c: device.product.id = "8788"
I: [pulseaudio] source.c: device.product.name = "CMI8786 (Xonar DG)"
I: [pulseaudio] source.c: device.string = "1"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 1.0 fragments of size 352800 bytes (2000.00ms), buffer size is 352800 bytes (2000.00ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -125.50 dB to 0.00 dB.
I: [pulseaudio] alsa-sink.c: Fixing base volume to 0.00 dB
I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-sink.c: Using hardware mute control.
I: [alsa-sink-Multichannel] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-Multichannel] alsa-sink.c: Starting playback.
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-source.c: Successfully opened device front:1.
I: [pulseaudio] alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-source.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] source.c: Created source 2 "alsa_input.pci-0000_03_07.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: alsa.resolution_bits = "16"
I: [pulseaudio] source.c: device.api = "alsa"
I: [pulseaudio] source.c: device.class = "sound"
I: [pulseaudio] source.c: alsa.class = "generic"
I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
I: [pulseaudio] source.c: alsa.name = "Multichannel"
I: [pulseaudio] source.c: alsa.id = "Multichannel"
I: [pulseaudio] source.c: alsa.subdevice = "0"
I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c: alsa.device = "0"
I: [pulseaudio] source.c: alsa.card = "1"
I: [pulseaudio] source.c: alsa.card_name = "Xonar DG"
I: [pulseaudio] source.c: alsa.long_card_name = "C-Media Oxygen HD Audio at 0xe800, irq 22"
I: [pulseaudio] source.c: alsa.driver_name = "snd_oxygen"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:03:07.0"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card1"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "13f6"
I: [pulseaudio] source.c: device.vendor.name = "C-Media Electronics Inc"
I: [pulseaudio] source.c: device.product.id = "8788"
I: [pulseaudio] source.c: device.product.name = "CMI8786 (Xonar DG)"
I: [pulseaudio] source.c: device.string = "front:1"
I: [pulseaudio] source.c: device.buffering.buffer_size = "131072"
I: [pulseaudio] source.c: device.buffering.fragment_size = "131072"
I: [pulseaudio] source.c: device.access_mode = "mmap+timer"
I: [pulseaudio] source.c: device.profile.name = "analog-stereo"
I: [pulseaudio] source.c: device.profile.description = "Analog Stereo"
I: [pulseaudio] source.c: device.description = "CMI8786 (Xonar DG) Analog Stereo"
I: [pulseaudio] source.c: alsa.mixer_name = "CMI8786"
I: [pulseaudio] source.c: alsa.components = "CS4245 CMI8786"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-source.c: Using 1.0 fragments of size 131072 bytes (743.04ms), buffer size is 131072 bytes (743.04ms)
I: [pulseaudio] alsa-source.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-source.c: Hardware volume ranges from -12.00 dB to 12.00 dB.
I: [pulseaudio] alsa-source.c: Fixing base volume to -12.00 dB
I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-source.c: Using hardware mute control.
I: [alsa-source-Multichannel] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-source-Multichannel] alsa-source.c: Starting capture.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #7; argument: "device_id="1" name="pci-0000_03_07.0" card_name="alsa_card.pci-0000_03_07.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card1 (alsa_card.pci-0000_03_07.0) module loaded.
I: [pulseaudio] module-udev-detect.c: Found 2 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
I: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #8; argument: "channels=2").
I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #9; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #11; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #10; argument: "").
I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #12; argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #13; argument: "").
I: [pulseaudio] module.c: Loaded "module-gconf" (index: #14; argument: "").
I: [pulseaudio] module-default-device-restore.c: Restored default sink 'alsa_output.pci-0000_03_07.0.analog-stereo'.
I: [pulseaudio] module-default-device-restore.c: Restored default source 'alsa_input.pci-0000_03_07.0.analog-stereo'.
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #15; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #16; argument: "").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #17; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #18; argument: "").
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #19; argument: "").
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #20; argument: "").
I: [pulseaudio] client.c: Created 0 "Login Session c1"
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #21; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #22; argument: "").
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #23; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #24; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #25; argument: "").
I: [pulseaudio] main.c: Daemon startup complete.
I: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)"
E: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory.
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
I: [pulseaudio] source-output.c: Trying to change sample rate
I: [pulseaudio] remap.c: Using generic matrix remapping
I: [pulseaudio] source-output.c: Created output 0 "Peak detect" on alsa_input.pci-0000_03_07.0.analog-stereo with sample spec float32le 1ch 25Hz and channel map mono
I: [pulseaudio] source-output.c: application.id = "org.gnome.VolumeControl"
I: [pulseaudio] source-output.c: media.name = "Peak detect"
I: [pulseaudio] source-output.c: application.name = "GNOME Volume Control Dialog"
I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c: native-protocol.version = "29"
I: [pulseaudio] source-output.c: application.icon_name = "multimedia-volume-control"
I: [pulseaudio] source-output.c: application.version = "3.12.1"
I: [pulseaudio] source-output.c: application.process.id = "2090"
I: [pulseaudio] source-output.c: application.process.user = "username"
I: [pulseaudio] source-output.c: application.process.host = "gimli"
I: [pulseaudio] source-output.c: application.process.binary = "gnome-control-center"
I: [pulseaudio] source-output.c: application.language = "en_US.UTF-8"
I: [pulseaudio] source-output.c: window.x11.display = ":0.0"
I: [pulseaudio] source-output.c: application.process.machine_id = "16327981f21a4906af3310ebf24dab15"
I: [pulseaudio] source-output.c: application.process.session_id = "c1"
I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.gnome.VolumeControl"
I: [pulseaudio] protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
I: [alsa-source-Multichannel] alsa-source.c: Increasing minimal latency to 1.00 ms
I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_03_07.0.analog-stereo idle for too long, suspending ...
I: [alsa-sink-Multichannel] alsa-sink.c: Device suspended...
I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_01_00.1.hdmi-stereo idle for too long, suspending ...
I: [alsa-sink-HDMI 0] alsa-sink.c: Device suspended...
I: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
I: [pulseaudio] sink-input.c: Trying to change sample rate
I: [pulseaudio] alsa-sink.c: Updating rate for device front:1, new rate is 48000
I: [pulseaudio] source.c: Changed sampling rate successfully
I: [pulseaudio] sink.c: Changed sampling rate successfully
I: [pulseaudio] sink-input.c: Rate changed to 48000 Hz
I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-media-role:test.
I: [alsa-sink-Multichannel] alsa-sink.c: Trying resume...
I: [alsa-sink-Multichannel] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [alsa-sink-Multichannel] alsa-util.c: ALSA period wakeups disabled
I: [alsa-sink-Multichannel] alsa-sink.c: Time scheduling watermark is 18.38ms
I: [alsa-sink-Multichannel] alsa-sink.c: Resumed successfully...
I: [alsa-sink-Multichannel] alsa-sink.c: Starting playback.
I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
I: [pulseaudio] remap.c: Using generic matrix remapping
I: [pulseaudio] sink-input.c: Created input 0 "Front Right" on alsa_output.pci-0000_03_07.0.analog-stereo with sample spec s16le 1ch 48000Hz and channel map front-right
I: [pulseaudio] sink-input.c: event.id = "audio-channel-front-right"
I: [pulseaudio] sink-input.c: media.name = "Front Right"
I: [pulseaudio] sink-input.c: media.role = "test"
I: [pulseaudio] sink-input.c: media.filename = "/usr/share/sounds/freedesktop/stereo/audio-channel-front-right.oga"
I: [pulseaudio] sink-input.c: application.name = "libcanberra"
I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
I: [pulseaudio] sink-input.c: native-protocol.version = "29"
I: [pulseaudio] sink-input.c: application.id = "org.gnome.VolumeControl"
I: [pulseaudio] sink-input.c: application.version = "0.30"
I: [pulseaudio] sink-input.c: application.process.id = "2090"
I: [pulseaudio] sink-input.c: application.process.user = "username"
I: [pulseaudio] sink-input.c: application.process.host = "gimli"
I: [pulseaudio] sink-input.c: application.process.binary = "gnome-control-center"
I: [pulseaudio] sink-input.c: application.icon_name = "multimedia-volume-control"
I: [pulseaudio] sink-input.c: application.language = "en_US.UTF-8"
I: [pulseaudio] sink-input.c: window.x11.display = ":0.0"
I: [pulseaudio] sink-input.c: application.process.machine_id = "16327981f21a4906af3310ebf24dab15"
I: [pulseaudio] sink-input.c: application.process.session_id = "c1"
I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:test"
I: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
I: [pulseaudio] protocol-native.c: Final latency 3837.50 ms = 1960.00 ms + 2*20.00 ms + 1837.50 ms
I: [pulseaudio] sink-input.c: Freeing input 0 "Front Right"
I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_03_07.0.analog-stereo idle for too long, suspending ...
I: [alsa-sink-Multichannel] alsa-sink.c: Device suspended...
^CI: [pulseaudio] main.c: Got signal SIGINT.
I: [pulseaudio] main.c: Exiting.
I: [pulseaudio] main.c: Daemon shutdown initiated.
I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #25).
I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #25).
I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #24).
I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #24).
I: [pulseaudio] module.c: Unloading "module-role-cork" (index: #23).
I: [pulseaudio] module.c: Unloaded "module-role-cork" (index: #23).
I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #22).
I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #22).
I: [pulseaudio] module.c: Unloading "module-systemd-login" (index: #21).
I: [pulseaudio] client.c: Freed 0 "Login Session c1"
I: [pulseaudio] module.c: Unloaded "module-systemd-login" (index: #21).
I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #20).
I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #20).
I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #19).
I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #19).
I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #18).
I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #18).
I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #17).
I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #17).
I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #16).
I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #16).
I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #15).
I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #15).
I: [pulseaudio] module.c: Unloading "module-gconf" (index: #14).
I: [pulseaudio] module.c: Unloaded "module-gconf" (index: #14).
I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #13).
I: [pulseaudio] source-output.c: Freeing output 0 "Peak detect"
I: [pulseaudio] client.c: Freed 1 "GNOME Volume Control Dialog"
I: [pulseaudio] client.c: Freed 2 "libcanberra"
I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #13).
I: [pulseaudio] module.c: Unloading "module-esound-protocol-unix" (index: #12).
I: [pulseaudio] module.c: Unloaded "module-esound-protocol-unix" (index: #12).
I: [pulseaudio] module.c: Unloading "module-bluez5-discover" (index: #11).
I: [pulseaudio] module.c: Unloaded "module-bluez5-discover" (index: #11).
I: [pulseaudio] module.c: Unloading "module-bluetooth-discover" (index: #10).
I: [pulseaudio] module.c: Unloaded "module-bluetooth-discover" (index: #10).
I: [pulseaudio] module.c: Unloading "module-bluetooth-policy" (index: #9).
I: [pulseaudio] module.c: Unloaded "module-bluetooth-policy" (index: #9).
I: [pulseaudio] module.c: Unloading "module-jackdbus-detect" (index: #8).
I: [pulseaudio] module.c: Unloaded "module-jackdbus-detect" (index: #8).
I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #7).
I: [pulseaudio] sink.c: Freeing sink 1 "alsa_output.pci-0000_03_07.0.analog-stereo"
I: [pulseaudio] source.c: Freeing source 1 "alsa_output.pci-0000_03_07.0.analog-stereo.monitor"
I: [pulseaudio] source.c: Freeing source 2 "alsa_input.pci-0000_03_07.0.analog-stereo"
I: [pulseaudio] card.c: Freed 1 "alsa_card.pci-0000_03_07.0"
I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #7).
I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #6).
I: [pulseaudio] sink.c: Freeing sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo"
I: [pulseaudio] source.c: Freeing source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor"
I: [pulseaudio] card.c: Freed 0 "alsa_card.pci-0000_01_00.1"
I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #6).
I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
I: [pulseaudio] main.c: Daemon terminated.
aplay -l:
card 0: DG [Xonar DG], device 0: Multichannel [Multichannel]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: DG [Xonar DG], device 1: Digital [Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
aplay -L :
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=DG
Xonar DG, Multichannel
Default Audio Device
front:CARD=DG,DEV=0
Xonar DG, Multichannel
Front speakers
surround40:CARD=DG,DEV=0
Xonar DG, Multichannel
4.0 Surround output to Front and Rear speakers
surround41:CARD=DG,DEV=0
Xonar DG, Multichannel
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=DG,DEV=0
Xonar DG, Multichannel
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=DG,DEV=0
Xonar DG, Multichannel
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=DG,DEV=0
Xonar DG, Multichannel
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=DG,DEV=0
Xonar DG, Multichannel
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
HDA NVidia, HDMI 1
HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
HDA NVidia, HDMI 2
HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
HDA NVidia, HDMI 3
HDMI Audio Output
My best guess at this point is that something(tm) is wrong with alsa. I have no idea how to troubleshoot this though. Any advice?
Please let me know if anything important is missing.
Last edited by InfamousBlue (2014-05-02 09:38:49)Did you ever have a copy of front channels or a mix of all of them played on the headphone jack with alsa only? I doubt it. If you kill pulseaudio and run following, what channels do you hear from headphones?
speaker-test -c 8 -t wav -D plughw:DG,0
This is probably more of a pulseaudio issue, since alsa usually does not copy streams.
InfamousBlue wrote:I did not however update pulseaudio or anything else alsa related (as far as I can tell).
Partial upgrades are not supported. There are some remapping examples on the wiki. If you seek a hardware remapping solution try hdajackretask from alsa-tools, it works however for hda compliant cards.
Last edited by emeres (2014-05-02 07:30:17) -
[Solved] Can't get MPD to work with PulseAudio
After a long time using straight Alsa I've been setting up Pulse because I want to send my laptop's audio to a networked device. So far I have audio output working (through my laptop) with everything except MPD. MPD won't output audio with Pulse enabled; songs stay in "paused" mode. I run MPD as my local user and have been trying to get this suggested systemd service to work, but it fails when I start it:
systemd[1]: Starting Music Player Daemon (running as 0112358)...
systemd[1]: Started Music Player Daemon (running as 0112358).
systemd[4098]: pam_unix(system-local-login:session): session opened for user 0112358 by (uid=0)
sudo[4095]: pam_unix(sudo:session): session closed for user root
mpd[4098]: Failed to bind to '[::]:6600': Failed to create socket: Address family not supported by protocol
systemd[4100]: pam_unix(system-local-login:session): session closed for user 0112358
systemd[1]: mpd-myuser.service: main process exited, code=exited, status=1/FAILURE
systemd[1]: Unit mpd-myuser.service entered failed state.
dbus-daemon[943]: dbus[943]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.55" (uid=1000 pid=4100 comm="(sd-p ") interface="org.freedesktop.login1.Manager" member="ReleaseS
dbus[943]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.55" (uid=1000 pid=4100 comm="(sd-p ") interface="org.freedesktop.login1.Manager" member="ReleaseSession" error name
systemd[4100]: pam_systemd(system-local-login:session): Failed to release session: Access denied
sudo[4114]: 0112358 : TTY=pts/3 ; PWD=/home/0112358 ; USER=root ; COMMAND=/usr/bin/journalctl
sudo[4114]: pam_unix(sudo:session): session opened for user root by (uid=0)
This is my /etc/mpd.conf:
music_directory "/home/0112358/Music"
playlist_directory "/home/0112358/Music/Playlists"
db_file "/home/0112358/.mpd/mpd.db"
log_file "/home/0112358/.mpd/mpd.log"
pid_file "/home/0112358/.mpd/mpd.pid"
state_file "/home/0112358/.mpd/mpd.state"
user "0112358"
gapless_mp3_playback "yes"
input{
plugin "curl"
audio_output{
type "pulse"
name "My Pulse Output"
/etc/asound.conf:
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
/etc/pulse/default.pa:
.nofail
.fail
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
load-module module-augment-properties
load-module module-switch-on-port-available
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
.nofail
load-module module-console-kit
.fail
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
load-module module-filter-heuristics
load-module module-filter-apply
### Load DBus protocol
.ifexists module-dbus-protocol.so
load-module module-dbus-protocol
.endif
### Make some devices default
#set-default-sink output
#set-default-source input
Could anyone give me a hand please?
Last edited by 0112358 (2013-06-30 15:30:33)0112358 wrote:
ngoonee wrote:Or you could workaround it by outputting to tcp/ip to pulse (I wrote that section of the pulseaudio article on wiki.archlinux.org)
You're suggesting running mpd as its own user? If I did that, and configured mpd to output to 127.0.0.1, etc, would Pulse then be able to redirect the audio to another networked machine (since that's my end goal here)? I don't want to end up having to put the other machine's IP directly in mpd.conf, since I won't always be running that way (since it's a laptop - sometimes I'll take it on the road and use headphones).
Pulse can do that, yes, its very flexible that way. Doesn't matter where the audio comes from, really. Though as a disclaimer, I haven't tried it myself yet.
Why not just set two outputs for mpd and toggle between them since it has native support? Doesn't sound like you really need pulseaudio.
Maybe you are looking for
-
Probelm in creating R/3 source system in BW 3.5!
Hi, steps i did for the creation of source system in BW are as follows! 1) crated RFC destinations in each of the system (BW3.5 and R/3 4.7 IDES) 2) created logical systems in each of the systems and assigned the client to the respective logical syst
-
Do_handle_data vs do_handle_event
Hi experts , can we explain differences b/w Do_handle_data vs do_handle_event
-
Check the table and column name in R12 web screen
Hello Friends Please any body can tell me how can I find out the table name and column name in web based forms like supplier, customer in R12. In 11i I can find out the table name and column name from help menu by record history and diagnostic -> exa
-
Site previews fine in Firefox locally, but when I published the site all the text is the wrong size
I am a rookie web designer. I recently created a site using CS6. http://www.joshuahetzler.com When I previewed the site in Dreamweaver it looked good in Firefox and IE. I published the site and now it is messed up in Firefox. All the text is the wron
-
Hi I have a Start button that starts a very large loop that does a lot of paintings and calculations, But I can't stop it because nothing in my program respond after the loop start running.Can some one please tell what to do Thanks