SZA1_D0100-SMTP_ADDR (e-mail adress in business partner for sales order)

I need to control that the in the Sales Order the field SZA1_D0100-SMTP_ADDR (e-mail adress in business partner) is setted.
I thinked to use USEREXIT_SAVE_DOCUMENT_PREPARE. In this exit I have on line the structure XVBPA with ADRNR and I haven't on line the structure SZA1_D0100-SMTP. When I'm inserting for first time e-mail adress in sales order, i must read the value in structure and not a DB table. In which structure on line for USEREXIT_SAVE_DOCUMENT_PREPARE i can read e-mail adress for a specific partner?
Also another way to control the setting of field SZA1_D0100-SMTP_ADDR is ok.
Thanks.

I need to control that the field is setted on the sales order during its creation. If there is another way....it is ok.
I have seen that exist the structure ADSMTP where there is adress e-mail, but it isn't on line in the exit USEREXIT_SAVE_DOCUMENT_PREPARE.
Who can help me?
Thanks.
Edited by: Biagio70 on Oct 18, 2010 4:19 PM
Edited by: Biagio70 on Oct 18, 2010 7:36 PM

Similar Messages

  • SZA1_D0100-SMTP_ADDR (e-mail adress in business partner)

    In need to control that the in the sales order the field SZA1_D0100-SMTP_ADDR (e-mail adress in business partner) is setted.
    I thinked to use USEREXIT_SAVE_DOCUMENT_PREPARE. In this exit I have on line the structure XVBPA with ADRNR and I haven't on line the structure SZA1_D0100-SMTP. When I'm inserting for first time e-mail  adress in sales order, i must read the value in structure and not a DB table. In which structure on line for USEREXIT_SAVE_DOCUMENT_PREPARE i can read e-mail adress for a specific partner?
    Thanks.
    Edited by: Biagio70 on Oct 15, 2010 11:54 AM

    Moderator message - Cross post locked
    Rob

  • Q: Extract additional business partner of sales order

    Hi experts,
    In ECC we have an additional business partner on sales orders, does anyone know the best way to extract this data to BW? As far as I can find you have to customiz the LIS extractor in ECC in order to get this data.
    Any suggestions?
    Thank you in advance,
    Mikael

    Hi Gustavo,
    We have found out that there are no suitable BTE for VBPA extraction. We therefore decided to go in another direction;
    A custom datasource based on a function module that extracts the data from VBPA using update date from VBAP to trigger the delta. This solution might not be perfect, but if is sufficient for our business scenario.
    This posts describes how to do it:
    LIS User Exit MCS10001 and VBPA table (Roberto N. read me!)
    Best regards,
    Mikael

  • Is there a Business Object for Sales Order Create and Change VA01 and VA02

    Hi experts -
    I am looking for a business object for Sales order create and change VA01 and VA02 respectively?
    Thanks,
    Mark

    Hi Mark,
    I think this question is best answered in [SAP Solutions|/community [original link is broken]; Forums.
    - Subhodeep
    Edited by: Subhodeep on Aug 29, 2009 11:14 AM

  • Create Business partner and Sales order automatic based on Excel file

    Hello everyone,
    Can anyone help me with the following.
    I need to create automatic Business partner master data and the Sales order in Business One based on the input list from one Excel file.
    Before the new automatic Sales order should to be created  the system need to create first the BP and then the Sales order using the new created BP.
    Is it possible to use some tools like CATT or LSMW for this reason.
    If yes can you please help me with a sample/
    Thanks and regards.

    use DTW (data transfer workbench ) or if you want to automate the entire thing, then an add-on using the DI is best.

  • BOM business requirement for sales order and PGI

    Hi Experts,
    Current setting
    The BOM structure is A = A1+A2
    1) Material A created in MM master item category group = ERLA
    2) Sub component material A1 and material A2, MM master item category group = NORM for both component.
    3) Maintained in CS01 BOM header is A and items are A1 and A2.
    4) Item category in IMG was created and assign item category also created.
        4.1) OR-ERLA-TAQ-TAE
    new business requirement as listed below.
    5) The material A is alway zero quantity on hand, no goods receipt required with no physical with such material or package at all. (it is dummy material number in SAP).
    6) while SO created.
        6.1) Fro material A sales price captured at BOM header level only, NO QTY and COSTshow in the sales order.
         6.2) Material A1 and A2 are actual physical inventory item in the ware house.
         6.3) The sub component of material A1 and A2 is required to captured QTY and COST. NO SALES PRICES NEEDED.
    CONCLUSION
    HOW to setup/configure such a business scenario?
    - Is it logic to configure as OR-ERLA-TAE-TAN that's what i think of?
      My problem is how to make the material A is alway ZEROS stock on hand and allow in sales order creation with ZEROS order qty?
    MATERIAL                                          QTY                             COST                                  SALES NET VALUE
           A                                                      0                                   0                                              1,500.00
           A1                                                    1                                  100.00                                           0
           A2                                                    1                                    50.00                                           0
    Thanks & Regards,
    Yong Kok Wah
    Edited by: Yong Kok Wah on Jan 27, 2010 11:16 AM

    As per your post,
    -  You are creating Main item which is a dummy material without any physical inventory maintained, but the pricing/billing should be done @ main item level.
    - here you are not dispatching main item, but billing should be carried at this level. in such case, I suggest you to go with the new sch.line cat w/o maintaining any mov type to it. & use Zitem category for this main item in VOV7, mark "Order qtty=1" so that min order qtty for this main item should be 1, so that you can calculate price.
    -  You want to capture Cost of sub items , summation of sub items cost is total cost of main item & Profit will be calculated accordingly.
    Sub items, sch.line category should have mov type, item cat should be not relevant for pricing & billing , but relevant for sch.lines. In Copy control from delivery - Billing @ item level, for the main item ,- item category, choose "Cumulate cost", so that cost of the sub items will be cumulated to main item.
    eg:
    MATERIAL QTY COST SALES NET VALUE
    A 0 0 1,500.00
    A1 1 100.00 0
    A2 1 50.00 0
    My problem is how to make the material A is alway ZEROS stock on hand and allow in sales order creation with ZEROS order qty?
    To avoid this, mark order qtty=1, in item category for main item, but for the same item, sch.line category should not have mov type. so that there will nt be any PGI document. But PGI should be done for sub items to capture inventory & cost.
    Test & revert, if any issues.

  • Business object for sales order credit status

    Is there a sap delivered business object that has a method to get credit status and overall blocked status of a sales order?

    This forum is for general questions about Business Objects (the company) products and information; since your question pertains to SAP products you will want to find the forum that relates most closely to your question so you can have experts in that area helping you.

  • How to Assign Business partner for Vendor Organisation

    Hi,
    We are in SRM upgrade from SRM 3.0 to SRM 7.0.
    For Vendor organisation say 0 50002381  there is no Business partner assigned.
    Under this organisation there are 200 vendors .
    When i run the report: BBP_XPRA_ORGEH_TO_VENDOR_GROUP
    it is showing an error -No partner assigned
    How to assign the Business partner for the organisation .
    Please give your inputs
    Regards
    G.Ganesh Kumar

    Hi Muthu,
    Thanks for the reply
    Already the SAP NOTES : 1372409 is applied.
    I am running the Migration report: BBP_XPRA_ORGEH_TO_VENDOR_GROUP. I am getting an error
    " Check mode 9: :Invalid Object on supplier node"
    How to resolve this issue.
    Already one more thread is open for this issue
    Regards
    G.Ganesh Kumar

  • Maintain Reference Business Partner for Consumers

    hi all,
    i have Maintain Reference Business Partner for Consumers  through the spro ( t-code : CRMC_BUPA_CONSUM ) that I find it wrong in another day, so can i delete one of the field that i have mantained for a particular reference bus partner ? if i can...please show me how ? i read once i mantain ..i can not change it , is that true ?
    best regards
    indah puspita

    Hi Indah,
    If you are using version 5.0 try this,
    Start Transaction SE37. Create function module CRM_BUPA_CONSUMER_ADD_SA in function group CRM_BUPA_CONSUMER with short text "Transfers changes ( added sales area) to all consumers". Define the following import parameters:
    Parameter Name: IV_MAX_BLOCK_SIZE
    Type specification: TYPE
    Associated Type: I
    Default value: 100
    Optional: X
    Define the following table parameters:
    Parameter Name: IT_SALES_AREA
    Type specification: LIKE
    Associated type: BAPIBUS1006_SALES_AREA
    Parameter Name: ET_RETURN
    Type specification: LIKE
    Associated type: BAPIRET2
    Optional: X
    Save the changes.
    Create function module CRM_BUPA_CONSUMER_CHANGE_SA in function group CRM_BUPA_CONSUMER with short text "Transfers changes of a sales area to all consumers". Define the same parameters as for the above function module.
    save changes.
    Create report CRM_BUPA_REF_BP_ADAPT_CHANGES in package CRM_BUPA with Transaction SE38.
    Title: "Distribution of changes to reference business partner"
    Type: 1
    Status: P
    Package: CRM_BUPA
    Save the changes.
    Use Transaction SE38 to open report CRM_BUPA_REF_BP_ADAPT_CHANGES and maintain the following text symbols (menu: Goto -> Text elements -> Text symbols):
    For CRM Release 5.0, define additionally:
    010 Sales organization 20   50
    011 Distribution channel 12   50
    012 Line of business 6    50
    On the "Selection texts" tab page (menu path "Goto -> Text elements -> Selection texts"), maintain the following texts for the variables already defined:
    Name: GV_P1
    Text: New sales area
    Name: GV_P2
    Text: Changes to sales area
    Save and activate all changes.
    check the OSS notes 1014356 if the problem still persists.
    reward with points.
    cheers,
    MARK

  • Create business partner for existing employee for SAP version 4.7

    Hi all !
    Do you know of a similar program of function like the HR_SYNC_PERSON in ECC 6.0 but work for version 4.7 ?
    I have look in OSS and SAP forum but I have not found.
    Our company need to create business partner for all existing employee but for our SAP 4.7 version.
    Thanks
    Hugo Nguyen

    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.sap-img.com/ab038.htm
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
    Transaction Code - MM41                     Create Material &
    Exit Name           Description
    MGW00001            Material Master (Retail): Additional Data
    MGW00002            Material Master (Retail): Number Assignment
    No of Exits:          2
    Transaction Code - MM42                     Change Material &
    Exit Name           Description
    MGW00001            Material Master (Retail): Additional Data
    MGW00002            Material Master (Retail): Number Assignment
    No of Exits:          2
    Rewards if useful.........
    Minal

  • Assignment: Business partner for person '50000029' is not unique

    HI,
    In the past, whenever I use to create the employee using Tcode PA40, the corresponding Business Partner (BP) used to get created.
    But now when I create the employee, BP does not gets created.
    I checked using the program "HR_SYNC_PERSON" and found that whenever I select the employee option and execute it gives the following error(whenever I select the employee option and execute):
    Assignment: Business partner for person '50000029' is not unique
    Can you please help!
    Regards
    Manish

    Oh, I understand.  Earlier I misunderstood your statement.
    So the CP is 50000029.  Regardless, the point is still the same.  SAP tried generating a BP to tie to CP 50000029.  Your system HAS configured a BP number range.  Whatever the next value of your number range is, seems like is already being used. 
    Go to the BP number range config and look at the next value.  Look in transaction BP and enter that BP and see if you get any hits.  My guess is that you will.  You'll likely need to end up changing your business partner number range.  You won't get unique violations for different OTYPE values. 
    What's your existing BP number range next value?  What happens when you search for that value in transaction BP?

  • Need information of Table containing Ship-to-party Partner at Sales Order

    Hello SAP folks,
    There is a scenario where we need to change the shipping address detail of a partner funtion "Ship-to-party" at Sales Order level. so I just wanted to know which tables stores all the data related to Address of Ship-to-party after the Sales Order is created.
    Suggestions are eagerly awaited in this topic !!
    Regards,
    Sarthak

    Hi sarthak
    As soon as you change the address for any partner in sales order, the changes are recorded in table ADRC. ( Normal address table for business partners)
    Select table VBPA and for the document number (VBLEN) and item number (POSNR) get the address number ( ADRNR) for the ship to party (WE)
    Now in the table ADRC with this ADRNR you can find the changed address for ship to party for the order.
    regards
    makarand

  • Partners are grayed out in "item partner" in sales order.

    Hi !
    I want to change the partner funtions in ITEM Partner in sales order. As of now i can not do that for a consignment fill up type of Sales doc. Where in IMG (?) i can change the settings so that i can change them manually.
    regards,
    vijay

    Hi,
    Go to SPRO - SD - Basic Functions - Partner Determination
    Under Sales Item Partner - you now have the option to either make the partner mandatory or editable in the document.
    Based on that setting, try changing your partner at line item level. I am sure this should work.
    Rewards points if helpful.
    Regards
    Ravi

  • Need to send a mail to group of users when sales order saved

    Hi
    user requirement is send a mail to group of users when sales order is saved

    hi Sanjay,
    Have a look on Michal's blog, it's for JMS, but it works for others: [PI/XI: Quick tip: Preserving attributes of XI messages via MultipartHeaderBean|PI/XI: Quick tip: Preserving attributes of XI messages via MultipartHeaderBean]
    Mickael

  • User Exit for sale order for adding a new partner

    Hi
    i am having the Scenario to add a new partner in  sales order in both VA01 / va02 transaction .
    i am using the exit named MV45AFZZ .   (USEREXIT_MOVE_FIELD_TO_VBAP) for this scenario.
    Its perfectly working for VA01 , but not VA02 .. why ..
    can any1  explain me ..

    Hi Irfan,
    You want to add partners in Sales order, the partners data will be saved in VBPA table.
    The USEREXIT_MOVE_FIELD_TO_VBAP is used for values for fields at sales document item level.
    For you its working for VA01 because , you have modified the strucure XVBPA for partners
    data and it is not saved yet to the database table so it is available in VA01 and in VA02
    it is checking the VBPA table there this data will not have been saved please check VBPA
    for your sales order.
    Please check below things.
    1) Check whether you have passed UPDKZ in XVBPA UPDKZ has below values INSERT (I),DELETE (D),UPDATE(U) etc nad
    if it doent works
    2) Please check the SAVE_DOCUMENT_PREPARE form and check XVBPA here whether it contains the
    entries you modified if not use the same code as you used in USEREXIT_MOVE_FIELD_TO_VBAP
    then these changes will be saved to database and hopefully you will get it in VA02 as well
    also pleaseuse the flag UPDKZ whenever you modifying this tables for your case
    XVBPA-UPDKZ.
    Regards,
    Pawan

Maybe you are looking for