T-Code: Mass to Update the Installation Object?
T-Code: Mass to Update the Installation Object?
When using the TCode Mass I do not see an object listed for the installation.
Does anyone know how to add it? Could we go to the enhancements for SAPMMSDL and add installation?
I did not find any user exits for the package MASS.
Any advice or guidance please?
I found and read the Cookbook, Mass Changes in IS-U.
It tells me about mass changes but is any of this available in the TCODE: MASS?
To put my request in context a bit. I wanted to update EANL and set the field ABLESARTST in MASS for 30k installations.
Hi James,
You can also develop a custom program using the FMs ISU_S_INSTLN_PROVIDE and ISU_S_INSTLN_CHANGE.
You need to first calling FM "ISU_S_INSTLN_PROVIDE" to get the auto object. Then update the field y_auto-data-ABLESARTST. And call FM "ISU_S_INSTLN_CHANGE" to pass back the data to the system.
Hope it helps...
Thanks,
Amlan
Similar Messages
-
Hi All
I have set up a simple custom HCM process and Form regarding Infotype TO CREATE AND CHANGE POSITION. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
Executing flow work item - Transaction brackets of the workflow has been damaged
Exception occurred - Error when starting work item 000000007031
PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
CREATE - Error when creating a component of type 'Step'
CREATE_WIM_HANDLE - Error when creating a work item
CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
EVENT_RAISED - Error updating the process object
Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
EVENT_RAISED - Error updating the process object
Executing flow work item - Transaction brackets of the workflow has been damaged
Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
Points to be noted:
1) I have searched few SAP notes such as 1384961(Notes for 6.0.4) but our system is in higher level patch 6.0.5
2) WF-BATCH have SAP_NEW and SAP_ALL authorization.
Appreciate your valuable suggestions.
Thanks
RagavHi Ragav
did you try to debug this? maybe something is missing in config of P&F?
Since you are on 605, the following note would be there in your system....use it to debug:
1422496 - Debugging background workflow tasks in HCM P&F
This will help you find the root cause.
regards,
modak -
How to update Tr code FB02 and update the field reference key1 (bseg-xref
Can any body
help me how to update Tr code fb02
and update the field reference key1 (bseg-xref1) with the interest amount
calculated.
Below i have written My program flow logic
The program should read the open items i.e debit items in the customer account,
Based on the invoice date and customer payment terms calculate the due date and then the interest should be calculated on that item based on the due date.
Use the transaction fb02 and update the field reference key 1 (BSEG-xref1)
with the interest amount calculated
Only consider customers whose interest indicator knb1-vzskz = 'vk'.
Interest is to be calculated for every 30 days
at the rate of 1% .please see example below.
Document date is 01.01.2007
for amount 1000SGD payment term 7 days
It becomes due on 08.01.2007
until 06.02.2007 you should not consider for calculation of interest
SGD on 7.02.2007 run you can consider this item for interest calculationHi Robert,
Thanks for answering.
I am looking at Ref 2 should flow automatically to clearing document from the accounitng document for billing.
Ex: Billing document is created and accounted. Ref 2 is AB
Now when receipt is accounted for this biling document this AB should flow automatically to Ref 2 field.
Thanks
NNS. -
Error updating the process object in MSS workflow...
Hi All,
I copied the standard workflow 'WS18900010' and triggered the same in backend. In this the first step is to approve the form. I set the agent as WF Initiator for this step. Now I approved the form. But the workitem went into error giving the error message 'ERROR UPDATING THE PROCESS OBJECT'.
What could be the reason for this?
If the originator of request and approver of request is same(just for testing purpose), then may dis also result into above error?
Please suggest.
GuddanHello,
Please maintain this 'CL_HRASR00_POBJ_WF_EXIT' in the workflow exit for the specific task and also at the workflow header level.
Execute the process and if still error occurs, check for HCM P&F authorization and if it is fine, then check if the case settings are maintained correctly.
you can find the case configuration in HCM P&F help docu.
hope this helps.
Best Regards
Saujanya -
Hi. Everytime i try to install an update - the installation template says that 2 programs still running: Microsoft Database Daemon.app & SyncServicesAgent.app and i cant find how to close these 2 applications... Thxs!
You ran a defective third-party "utility" such as "CleanMyMac" or "MacCleanse" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system and many applications.
The first thing you need to do is remove that software according to the developer's instructions. Never install it, or anything like it, again. Then see below.
If you don't already have a current backup, back up all data. There are ways to back up a computer that isn't fully functional. Ask if you need guidance. You can skip this step if you don't care about the data that hasn't been backed up.
Reinstall the OS.* Your data should be unaffected unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later. -
Error code "-1" while updating the iOS from IPAD2
When I try to update my IPAD2 to iOS 4.3.2 I receive the error code "-1" at the end of the installation, and now I´m stuck in the restore point, because the system don´t boot anymore. When I connect to Itunes it says I have to download the update, then the error appear again, and this is going over and over... Any hints here?
i dont 'now whay people of apple company not concern about this probleme .
i am facing the the same that you have . no one answer . please good felwo help us -
Difficulty in updating the list object values
I have created a list with Objects(MyVertex). I am trying to update the list based on the condition . Instead it adds duplicate values. The simple logic is (if the object is already in the list )only update the values or add to the list (Object) Please help me how can I correct my code.
public static void updateResult(MyVertex c)
Iterator it2=result.iterator();
while(it2.hasNext())
//System.out.println( "Result to be added : "+c.getName());
j=(MyVertex)it2.next();
if(j.getName().equals(c.getName()))
j.setWeight(c.getWeight());
break;
//System.out.println( "Result item name : "+j.getName());
result.add(c);
}Thanks a lot .Thank you all for your immediate reply. It has solved half of my problem.Now It is not adding all "c" ,but it still not updating the value if the matching found.
public static void updateResult(MyVertex c)
Iterator it2=result.iterator();
while(it2.hasNext())
//System.out.println( "Result to be added : "+c.getName());
j=(MyVertex)it2.next();
if(j.getName().equals(c.getName()))
j.setWeight(c.getWeight());
flag=true;
return;
//System.out.println( "Result item name : "+j.getName());
if(!flag)
{result.add(c);}
} -
Update the authorization object value for more than 1000 role
I need to remove one of the activity value (06) from authorization object S_SCD0.
I do a search and found out that there are more than 1000 roles which having the activity value = 06 for authorization object S_SCD0.
However, I don't think I can create a SCAT script to update all these 1000 roles and I believe its going to be a very tedious if I am going to manually change it one-by-one. Hence, I am wondering is there any standard program/function which I can use to automate the above changes for all these 1000 over roles.
Kindly advise.
ThanksDirect update the table is the easiest way, but should be discourage for the obvious reason.
Should take a step back, take a long term view, when you need to update 1000 roles, maybe a role redesign might be needed. For example, if you can change the role model to derive role model, once update to the parent role will take care of all the child role.
Thanks,
Lye -
I receive an error message when trying to update the Installer
I've uninstalled and reinstalled with no luck: Installer was unable to access a critical file/directory. Please try installing again.(Error code: 43) Contact Customer SupportInstaller was unable to access a critical file/directory. Please try installing again.(Error code: 43) Contact Customer Support
uninstall and clean per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
then right click the installation file and click 'run as administrator', if you have a win os. -
Transaction code/Program to update the Business place/Section
Dear Sir?Madam
We have migrated from 4.6B to ECC6. we are implementing EWT and are testing the tax etnries. while doing miro in some douments the users forgot to update the business place and section field. while doing challan updation it is not allowing to update the challan.
Can you help in suggesting which program or transaction code can be run to update the business place and section so that the challan can be updated and certificate printed.
Regards
SumitaDear Sumita,
It seems you are entering the FI document number in the
selection screen of the transaction J1INPP. You need to give
the MIRO document number in the section screen of transaction
J1INPP instead of corresponding FI document number. Once you enter the
MIRO document number in the transaction J1INPP, the program will update
the business place and section code for the corresponding FI document.
Regards
Prashant -
10.5.4 Update: The Installer could not install some files in "/"
I am unable to install 10.5.4 on my Intel iMac. I have rebooted multiple times, disconnected all external drives including my printer and tried the installer with no success. I have not found anything pointing to why on the forums. Any assistance would be helpful.
Model Name: iMac
Model Identifier: iMac4,1
Processor Name: Intel Core Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: IM41.0055.B08
SMC Version: 1.1f5
Thanks,I am having the same issue, and a permissions repair did nothing for me.
I have attempted an install from software update, downloaded both the 10.5.3/4 combo update, and the 10.5.4 update and manually tried to install, each time with the same error: The Installer could not install some files in "/" -
I get Error Code 1 when using the installer. Please advise.
When running the installer, it quits with the message: Error Code 1. Please advise how to resolve @this error.
Gener7: Good morning. Thanks for speedy reply. I’m running Windows 7 on a Dell Studio laptop computer. I have CS6 installed, and it runs okay.
I ran the CC Cleaner tool to uninstall Photoshop CC. PCC kept crashing every time soon after I tried editing an image. I gave up. After the cleaning, I tried to re-install PCC. The error code 1 showed each time I ran the installer.
Please advise.
Thanks.
============== -
Why org vaues is not updating the Changed Objects
hi all,
we have a master role with some some objects as maintained and some as changed and some as standard.
when i derived some 10 child roles and added org values. this org value is not pusing for the changed objects, even when i add it in the field, once if i make any other modification in the master role and distribute it to child roles then all the org values for the changed objects are going to blank again
so, org values wont push or work for changed objects? please help
thanks,
SSS>
sun wrote:
> can you tell the difference between maintained and changed in PFCg
>
Hi Sun,
Is it a coincidence that the objects having ORG level fields are in changed state in the master role or is it becasue of the SAP feature?
When we directly maintain ORG fileds in objects and NOT in the specified ORG window, then
first - > the object status goes to changed
second -> when you create derived roles, that field will not be maintained in the derived role even though you maintain ORG values in derived roles. The value maintained in the master role is passed to the child role.
What you need to do is follow what Jurjen said..... first ... fix the messed up master role, and then maintain the ORG values in the derived roles.
Hope this helps
Abhishek -
I am just updating a button control code which is updating the MS SQL Server 2008
protected void Button1_Click(object sender, EventArgs e)
string cs = ConfigurationManager.ConnectionStrings["SampleConnectionString"].ConnectionString;
SqlConnection con = new SqlConnection(cs) ;
try
SqlCommand cmd = new SqlCommand("insert into Contacts values('" + txtFirstName.Text + "','" + txtLastName.Text + "','" + txtSubject.Text + "','" + txtEmail.Text + "', '" + txtAddress.Text + "', '" + txtCity.Text + "','" + txtPinCode.Text + "','" + txtTelephoneNumber.Text + "', '" + txtMobileNumber.Text + "')", con);
con.Open();
cmd.ExecuteNonQuery();
lblMessage.Visible = true;
lblMessage.Text = "Your details added to the website. Thank You!";
txtFirstName.Text="";
txtLastName.Text="";
txtSubject.Text = "";
txtEmail.Text = "";
txtAddress.Text = "";
txtCity.Text = "";
txtPinCode.Text = "";
txtTelephoneNumber.Text = "";
txtMobileNumber.Text = "";
catch
finally
con.Close();
Dear all,
I am using asp.net as front end for updating MSSQL 2008 R2 database. When I click submit button. The data is not updating into the database.
Firstly the code is not coming out after I pressed Submit button. I have to go to the code and select the stop button in the visual studio buttons.
can somebody throw light on this.
thanks
SathyaHello,
Post your question in ASP.NET forums
and you'll get more help from web developers.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How do I update the installation ISO?
I have new hardware that needs kernel 2.6.25 to boot and I need to install Arch on it.
Let's say that we have the x86_64 2008-03 installation ISO.
How do I update it to include the new kernel 2.6.25?dolby wrote:neotuli is planning to release new isos as soon as 2.6.25 hits core, or on April 30th. Whichever comes first.
Then let's hope that 2.6.25 hits core before then, as I am going to need it.
Maybe you are looking for
-
I have an M-audio firewire 410 audio interface hooked up to 6 speakers, and it works great with my FCP and iTunes. Then I go to Logic, and go to Preferences, Audio, Drivers, and set it to the firewire 410 multi-channel selection. When I go to my time
-
Plese help! Stuck on some basic Java homework...
I am taking this introduction to java class and we were given 3 homework assignments and I am really stuck on 2 of them. One of the assignments asks to make a index.html page that will connect to a mysql database for coffee/suppliers. The first part
-
Force a single landscape orientated page to follow the general portrait orientation of pages
I have moved a single page PAGE X from DOCUMENT 2 into a DOCUMENT 1. The page page moved from DOC 2 is landscape orientated. The pages in DOC 1 are portrait orientated. How can I rotage PAGE X to a portrait position aligning it to the other pages of
-
I am currently trying to insert a 20X20 image a specific spot on an array spot[X][Y], but do not know how to get them in the array. Can anyone help me? I am using JPanel and want the images to be displayed within the GUI.
-
Could anyone please send me Shell script for taking Cold backups on solaris The script will be run and will start taking backup if possible Automatically it will Down and UP the Database Thanks Mark