T-Code SMQS

Hello everyone!
I am facing some problems to replicate BPs between CRM and CS systems.
I´ve noticed that SMQS is always in status WAITING, hence the Outbound Queue (SMQ1) has always lots of entries.
That could be the reason for the performance problem.
I tried to change the numbers of connections in SMQS (Max.Conn.), but it did not work.
Does anybody know what can I do to solve it?
Thanks in advance for your help.
Regards,
Morgana Rodrigues

Hi Aaru,
I can activate the queues manually, but I need the scheduler doing this task.
Unfortunately, the problem persists.
Anyway, thanks for your help.
Have a nice week.
Regards,
Morgana
PS: SAP Notes mentioned before were applied.

Similar Messages

Material replication without registering queues in SMQS and SMQR in SRM 7.0

Hi,
Please help me to understand following:
What is the use of transction SMQS and SMQR ?
what is the use of registering inboud and outboud queue in SMQS and SMQR ?
Do material replication will not work if I will not register any queue in the said transaction code ?
If yes, what are the queue I need to register in SRM and ECC respectively ?
Regds,
Jennifer

Hi jenny ,
1. T code SMQS is used to register a destination and prior to this u need to define your destination by using T code SM59.
2.T code SMQR is used to set up the ques.CRM ---> CRM Middleware and Related Components -
>Queue Setup à Register CSA Queues.
3. to monitor and organise the Inbound and outbound queues.
Sachin s

Queue Block (SMQ2) and no GATP invoking for Sales Order

Hi,
I am encountering two issues:
- Every time I activate any integration model for customer, materials etc. it queues up in SMQ2 in ECC and on processing there it goes to the APO
- When I create sales order it does not invoke the GATP screen. However, if I click onto the 'Item availability' button it takes me to the APO screen with a different check mode (different from the one maintained in product master)
- On saving the sales order and then clicking 'Item availability' button again, I get the message 'Order do not exist'. Next, if I check SMQ1 in ECC I find the queue. If I try to re-process, I get the message "LUWs in status NOSEND must be picked up by the application.
Well, we have maintained X0 for the MRP materials, did CIF manually, and have udated the product master ATP view with new check mode. We have also maintained the distribution, RFC destination, change transfer settings etc.
Can someone please tell me as to what is it that controls the queue communication between ECC & APO or if anything else that is controlling this.
Regards,
Avijit

Hi Santosh,
We maintained this settings in /SAPAPO/C4 in APO.
Also, we maintained Debug = 'R', Logging = 'D' (Detailed) and RFC Mode = 'Q' (Queued RFC) in CFC2 of ECC.
Even on changing the Debugging off in APO system to "Debugging on" / "Debugging on, Recording of t/qRFCs (NOSENDS)". I get the queue in SMQ2 of APO with status 'NOEXEC' i.e. no automatic execution.
Another info:
The queues are CF* and for that we maintained like this:
In ECC (T-code: SMQS): Host id of ECC system is appearing at the 'Schedular Information' section and against the Destination of SCM system we maintained Host id of ECC system once again
In ECC (T-code: SMQR): Host id of ECC system is appearing at the 'Schedular Information' section and against CF* queue Destination with Logon data is blank
In SCM (T-code: SMQS): Host id of SCM system is appearing at the 'Schedular Information' section and against the Destination of ECC system Host id is kept blank
In SCM (T-code: SMQR): Host id of SCM system is appearing at the 'Schedular Information' section and against CF* queue Destination with Logon data is blank
In the light of these, is there something , that I am missing. Please let me know.
Regards,
Avijit

SAP CRM Middleware flow from R/3 to CRM

hi
I am new to CRM middleware I have some doubt about the replication from the R/3 to CRM.
I have some 4 basic questions Kindly help me out
1.in initial down lode how to know which object for which requirement? There is any list like these objects for this one?
2.when the initial download have to use and when the delta down lode have to use?
3.object creating is preferable option or not if yes in which condition we have to create the objects?
4.what is the difference between customizing objects and business objects? and when we have to use which object ?
wiht Regards,
prakesh..!

Hi Prakesh
Happy to hear that my answers were useful. Hope this new will solve your problem.
So let's reply to your new questions.
1) Yes it is the delta download. This means that you have already triggered the initial download. Now all changes or new creations are replicated into the CRM system. I do not suggest this approach. This is usually used when you have no other chance because this process is complex and very time consuming. I would suggest checking the BDoc before proceding with degugging the queue. Go to transaction code SMW01. Filter on time (when you made the change). You will find bdocwith a red or yellow traffic light. This means that data have been not processed in CRM system. You usually have an error message (just select the BDoc from the list and click the red button in the toolbar) attached to the BDoc that is explainatory of the error. Correct the error and reprocess the BDoc (there is a proper button).
2) To debug the queue go to transaction code SMQS and SMQR and deregistrate inbound and outbound queue in the CRM system. After you do this, apply the changes to the customer. You will find an inbound queue in transaction code SMQ2. Select the queue and click the last button in the header toolbar. You will process the flow in debug. Remember to register the queue when this is no more necessary otherwise you will have a mess in the system.
3) if you create new customer in CRM system, this are automatically replicated in the backend system basing on the scenario set. No additional tables are created. All the changes applied in the CRM system will be replicated in the backend with the same process except the Bdoc that are really CRM specific.
Hope this help you.
Regards,
Fabrizio

What are the main transaction codes in XI?

What are the main transaction codes in XI?

SAP XI TRANSACTION CODES
ALRTCATDEF- Alerts Configuration.
ALRTDISP - Display of Alerts Created
SXMB_IFR -> Start Integration Builder
SXMB_MONI -> Integration Engine - Monitoring
SXI_MONITOR -> XI: Message Monitoring
SXI_CACHE -> To Access IS runtime cache
SXI_SUPPORT -> Test all the Repository and Directory Objects
SXI_CACHE -> XI data directory cacheidx1 -> idoc adapter
IDX2 -> idoc metadata
IDX5 -> monitor idoc adapter
SM21 -> log di sistema
ST22 -> dump abap (analisi di eccezioni)
SMQ1 -> messages inbound e outbound queue
SMQ2 -> messages inbound e outbound queue
SMICM -> J2EE administration
ST06 -> stato della macchina cpu memory filesystem machine status - cpu, memory and file system.
ST03 -> workload.
SCC4 -> visualizza mandanti del sistema
WE20 -> partner profiles
sale - ale settings
RZ10 - edit system profile
SM59 ->mantain rfc destinations
BD64 -> mantain distribution model (trasformazioni)
SU01 -> users
AL08 -> list all logged users(user login logon)
SE10 -> Change Request
SE09 -> Change Request
WE05 -> All idocs
WE19 -> IDoc Test Tool
WE21 -> port definition
SE11 -> Data dictionary
SM21 -> log sistema xi
se37 -> mantain funcion modules
SICF -> http server configuration
SMGW -> trace, alzare livello di trace.
BD13 ->
BD64 -> modelli di distribuzione
PFCG -> Roles
tabella TSTC -> sap transactions codes
tabella TSTCT -> transaction descriptions
STMS -> transports management
SPAM -> apply ABAP support packages
SPAU -> manage objects after apply support packages
SE01 -> manage change requests
SLDCHECK -> Test SLD Connection
SLDAPICUST-> SLD API Customizing
SXMB_ADM -> Integration Engine - Administration
SXMB_MONI_BPE -> Process Engine - Monitoring
SE38 -> ABAP Editor
SE11 -> ABAP Dictionary
ST22 -> ABAP dump analysis
SPROXY-> ABAP Proxy Generation
SE80 -> Object Navigator
ABAPDOCU -> ABAP Documentation and Examples
SE24-> Class Builder
SM21-> Online System Log Analysis
SMQ1-> qRFC Monitor (Outbound Queue)
SMQ2-> qRFC Monitor (Inbound Queue)
RZ70-> SLD Administration
SM58-> Asynchronous RFC Error Log
SM59-> RFC Destinations (Display/Maintain)
SMICM-> ICM Monitor
WE60-> Documentation for IDoc types
BD87-> Status Monitor for ALE Messages
IDX1-> Port Maintenance in IDoc Adapter
IDX2-> Meta Data Overview in IDoc Adapter
WE05-> IDoc Lists
WE02-> Display IDoc
WE19-> Test tool
WE09-> Search for IDocs by Content
WE20-> Partner Profiles
WE21-> Port definition in XI
SE16-> Data Browser
SE93-> Maintain Transaction Codes
SM30-> Call View Maintenance
SU01-> User Maintenance
SM02-> System Messages
BD54 -Logical System Creation.
SWXF_PBUILDER -> for Detail BPM Process
SMQS - > to register the destination in QOUT scheduler
WEOUTQUEUE - > to start the queue processing
SMQR - > to register the queue
IDXPW - > to activate the IDOC message package
IDXP - > to monitor the message packages.
SWF_XI_CUSTOMIZING -> transaction to check prerequisites for integration processes.
http://www.erpgenie.com/abaptips/content/view/452/62/

Trasanction Codes used in Sales & Marketing Modules

Hi All,
Please provide important Transaction codes (T Codes) that is been using in Sales & Marketing modules for solving the
Support It Ticket for CRM.
Please let me know which are the area's that are using into.
eg: Sa38 is ABAP reporting
Sm37 : background jobs.
Please do reply so that i would be helpful for me,
Thanks in advance
Prajith P

Hi Prajith
Hope the below transaction codes in CRM will be helpful.
Transaction Code - Description
SE19 Badi implementation
SE93 Transaction code check
smw01 workflow
Crm_Erms_mailforms Forms
SWDD ERMS Rule modler workflow
SE 18 BADi creation
SE19 Badi implementation
se11 tables
SE38 Functional module reports/fields display
se11 crmd_orderadm_h
SE16 TC
TSTC
SE93 Application Component - get there displayed all transaction codes for example crm-md-bp
CRMD_ORDER - creating marketing sales and service transactions
BP - BP
CRM_MKTPL FOR search campaigns deals
sost-transmissionRequest forms
scot -administration system status
CRM_UI_FRAME: Access BSP WD work bench
BP -Business Partner (Creation/View/Modification)
CIC0 -Customer Interaction Centre
CRMD_ORDER - CRM Transaction (Create/View/Modify)
SPRO - Configuration related settings
CRMD_CALL_LIST-Create/ Maintain Call list
IB51 / IB52 / IB53-Ibase Creation / Change / View
COMMPR01-Maintain Products
PPOSA_CRM-Display Organizational Model
SBDM-Bdoc maintenance
SMOEAC- Administration console u2013 CRM Middleware
SMQ1,SMQ2 Queue monitoring transactions for inbound and outbound queues.
SMW01 Transaction for monitoring bdocs.
MIddleware t-code
Transactions Transaction Codes
Work process overview SM66
CPU and memory consumption ST06
SAP memory and buffers ST02
Database performance counters ST04
Memory consumption per user SM04 (on each application server)
Table call statistics ST10
CPU & Memory Consumption on IPC Server OS07
CRM Inbound Queue SMQ2
CRM Outbound Queue SMQ
Monitor Load R3AM1
Define Request R3AR2
Run Request R3AR4
Request Business Partner CRMM_BUPA_MAP
Send Business Partner CRMM_BUPA_SEND
RFC statistics (client and server) ST03
Errors in transactional RFCs SM58
BDOC Statistics SMWMFLOW
Response time statistics ST03 & STAD
Error Tracking SMWP
Q-Out Scheduler SMQS
Q-In Scheduler SMQR
Bdoc Error Tracking SMW01 & SMW02
Short Dumps ST22
Admin Console SMOEAC
Process Overview SM50
User List AL08
Data Integrity Manager SDIMA

T.Codes for SAP XI 3.0

Hi All,
Can one give me all the SAP XI related transaction codes so that it will easy for me to learn SAP XI or any URL which will give me the same.
Regards,
Krushna Biswal

Hi Krushna
Following Tcode may Help you
ALRTCATDEF- Alerts Configuration.
ALRTDISP - Display of Alerts Created
SXMB_IFR -> Start Integration Builder
SXMB_MONI -> Integration Engine - Monitoring
SXI_MONITOR -> XI: Message Monitoring
SXI_CACHE -> To Access IS runtime cache
SXI_SUPPORT -> Test all the Repository and Directory Objects
SXI_CACHE -> XI data directory cacheidx1 -> idoc adapter
IDX2 -> idoc metadata
IDX5 -> monitocr idoc adapter
SM21 -> log di sistema
ST22 -> dump abap (analisi di eccezioni)
SMQ1 -> messages inbound e outbound queue
SMQ2 -> messages inbound e outbound queue
SMICM -> J2EE administration
ST06 -> stato della macchina cpu memory filesystem machine status - cpu, memory and file system.
ST03 -> workload.
SCC4 -> visualizza mandanti del sistema
WE20 -> partner profiles
sale - ale settings
RZ10 - edit system profile
SM59 ->mantain rfc destinations
BD64 -> mantain distribution model (trasformazioni)
SU01 -> users
AL08 -> list all logged users(user login logon)
SE10 -> Change Request
SE09 -> Change Request
WE05 -> All idocs
WE19 -> IDoc Test Tool
WE21 -> port definition
SE11 -> Data dictionary
SM21 -> log sistema xi
se37 -> mantain funcion modules
SICF -> http server configuration
SMGW -> trace, alzare livello di trace.
BD13 ->
BD64 -> modelli di distribuzione
PFCG -> Roles
tabella TSTC -> sap transactions codes
tabella TSTCT -> transaction descriptions
STMS -> transports management
SPAM -> apply ABAP support packages
SPAU -> manage objects after apply support packages
SE01 -> manage change requests
SLDCHECK -> Test SLD Connection
SLDAPICUST-> SLD API Customizing
SXMB_ADM -> Integration Engine - Administration
SXMB_MONI_BPE -> Process Engine - Monitoring
SE38 -> ABAP Editor
SE11 -> ABAP Dictionary
ST22 -> ABAP dump analysis
SPROXY-> ABAP Proxy Generation
SE80 -> Object Navigator
ABAPDOCU -> ABAP Documentation and Examples
SE24-> Class Builder
SM21-> Online System Log Analysis
SMQ1-> qRFC Monitor (Outbound Queue)
SMQ2-> qRFC Monitor (Inbound Queue)
RZ70-> SLD Administration
SM58-> Asynchronous RFC Error Log
SM59-> RFC Destinations (Display/Maintain)
SMICM-> ICM Monitor
WE60-> Documentation for IDoc types
BD87-> Status Monitor for ALE Messages
IDX1-> Port Maintenance in IDoc Adapter
IDX2-> Meta Data Overview in IDoc Adapter
WE05-> IDoc Lists
WE02-> Display IDoc
WE19-> Test tool
WE09-> Search for IDocs by Content
WE20-> Partner Profiles
WE21-> Port definition in XI
SE16-> Data Browser
SE93-> Maintain Transaction Codes
SM30-> Call View Maintenance
SU01-> User Maintenance
SM02-> System Messages
BD54 -Logical System Creation.
SWXF_PBUILDER -> for Detail BPM Process
SMQS - > to register the destination in QOUT scheduler
WEOUTQUEUE - > to start the queue processing
SMQR - > to register the queue
IDXPW - > to activate the IDOC message package
IDXP - > to monitor the message packages.
SWF_XI_CUSTOMIZING -> transaction to check prerequisites for integration processes.
Thanks

SMQS transaction and Vertex calls timeout

Hi,
    We just went live with one our SD projects. Before we went live we never had Vertex timeout issue, but after we went live we started getting 0 or 2 or sometimes 4 dumps in a day "CALL_FUNCTION_REMOTE_ERROR" The function where it dumps is RFC_CALCULATE_TAXES_DOC destination VERTEX. The description says "timeout during allocate" no connect of TP /usr/lpp/vertex/translink/verrfc from
host ansapap7 after 122 sec" .
RFC status: "CODE=CM_PRODUCT_SPECIFIC_ERROR CM_NO_STATUS_RECEIVED
CM_NO_DATA_RECEIVED SAPCODE=456 CONV=06153020"
RFC error text: "RFC_IO27"
CPI-C error text: "CPIC-CALL: 'ThSAPCMRCV'#Timeout during connection setup
(check that partner exists) "
Wierd thing is that it does not happen all the times. It happens 3 to 4 times in a day, sometimes it happens only once and sometimes does not happen at all.
I checked the SMQS transaction, it shows destination Vertex, max connection 1, max timeout 60. With this setting since last 3 + years we never had timeout issue, then why now when we have some 500 more orders being processed per day. These settings are still working for majority of orders, only some orders could pass through and get this dump.
Can someone guide me what this problem can be. Also can someone tell me is it safe to change the max connections and max timeout parameters in SMQS transactions and will changing those settings help in solving this.
Thanks in advance
Pulin

I had checked 645527 note also. We have not upgraded SAP since last 3 yrs. Its still 4.7, we have not applied any upgrade patches. It started happening after we went live on November 4th 06.
I think, this is some load distribution issue. Should I change the settings in SMQS transaction. Is that safe ?
If any one of you are using Vertex with SAP 4.7 or higher, then can you tell me what is present in table TTXC. Does this table contain old RFC calls(RFC_CALCULATE_TAXES1) or new RFC names(RFC_CALCULATE_TAXES_DOC).?

Transacation codes

Hello,
I am new to SAP XI. So could you please tell me the transaction codes which we use in SAP XI. I know so many transaction codes were there, but at least which were important to note. And what are the main objects to learn.
Thank you

SAP XI TRANSACTION CODES
ALRTCATDEF- Alerts Configuration.
ALRTDISP - Display of Alerts Created
SXMB_IFR -> Start Integration Builder
SXMB_MONI -> Integration Engine - Monitoring
SXI_MONITOR -> XI: Message Monitoring
SXI_CACHE -> To Access IS runtime cache
SXI_SUPPORT -> Test all the Repository and Directory Objects
SXI_CACHE -> XI data directory cacheidx1 -> idoc adapter
IDX2 -> idoc metadata
IDX5 -> monitor idoc adapter
SM21 -> log di sistema
ST22 -> dump abap (analisi di eccezioni)
SMQ1 -> messages inbound e outbound queue
SMQ2 -> messages inbound e outbound queue
SMICM -> J2EE administration
ST06 -> stato della macchina cpu memory filesystem machine status - cpu, memory and file system.
ST03 -> workload.
SCC4 -> visualizza mandanti del sistema
WE20 -> partner profiles
sale - ale settings
RZ10 - edit system profile
SM59 ->mantain rfc destinations
BD64 -> mantain distribution model (trasformazioni)
SU01 -> users
AL08 -> list all logged users(user login logon)
SE10 -> Change Request
SE09 -> Change Request
WE05 -> All idocs
WE19 -> IDoc Test Tool
WE21 -> port definition
SE11 -> Data dictionary
SM21 -> log sistema xi
se37 -> mantain funcion modules
SICF -> http server configuration
SMGW -> trace, alzare livello di trace.
BD13 ->
BD64 -> modelli di distribuzione
PFCG -> Roles
tabella TSTC -> sap transactions codes
tabella TSTCT -> transaction descriptions
STMS -> transports management
SPAM -> apply ABAP support packages
SPAU -> manage objects after apply support packages
SE01 -> manage change requests
SLDCHECK -> Test SLD Connection
SLDAPICUST-> SLD API Customizing
SXMB_ADM -> Integration Engine - Administration
SXMB_MONI_BPE -> Process Engine - Monitoring
SE38 -> ABAP Editor
SE11 -> ABAP Dictionary
ST22 -> ABAP dump analysis
SPROXY-> ABAP Proxy Generation
SE80 -> Object Navigator
ABAPDOCU -> ABAP Documentation and Examples
SE24-> Class Builder
SM21-> Online System Log Analysis
SMQ1-> qRFC Monitor (Outbound Queue)
SMQ2-> qRFC Monitor (Inbound Queue)
RZ70-> SLD Administration
SM58-> Asynchronous RFC Error Log
SM59-> RFC Destinations (Display/Maintain)
SMICM-> ICM Monitor
WE60-> Documentation for IDoc types
BD87-> Status Monitor for ALE Messages
IDX1-> Port Maintenance in IDoc Adapter
IDX2-> Meta Data Overview in IDoc Adapter
WE05-> IDoc Lists
WE02-> Display IDoc
WE19-> Test tool
WE09-> Search for IDocs by Content
WE20-> Partner Profiles
WE21-> Port definition in XI
SE16-> Data Browser
SE93-> Maintain Transaction Codes
SM30-> Call View Maintenance
SU01-> User Maintenance
SM02-> System Messages
BD54 -Logical System Creation.
SWXF_PBUILDER -> for Detail BPM Process
SMQS - > to register the destination in QOUT scheduler
WEOUTQUEUE - > to start the queue processing
SMQR - > to register the queue
IDXPW - > to activate the IDOC message package
IDXP - > to monitor the message packages.
SWF_XI_CUSTOMIZING -> transaction to check prerequisites for integration processes
Catagory Listing:
/people/morten.wittrock/blog/2006/03/23/getting-started-with-xi-part-1-xi-30-cheat-sheet
regards,
nikhil

CRM Monitoring T-codes

Hi All,
Can any of them help me in monitoring steps and T-code used while monitoring a CRM Server.
Regards,
Sandeep Singh

Hi ,
If you are looking for CRM Middleware monitoring T-Codes . Here are few :
1) SMW01 -- Display Bdoc
2) SMW02 - Display Bdoc summary
3) To view the Unprocessed Bdoc Type in the sytem use : SMW03
4) SMW20 - for Bdoc Procsing
5) SMWMFLOW - Monitoring Message Flow
For qrfc related monitroing check
SMQR -- QIN Scheduler ( Inbound Queue checking )
SMQS -- Qout Scheduler ( OutBound Queue checking )
If you have to monitoe R&R queues use transaction : SMOHQUEUE
Hope this helps
Vinayak

List of CRM T. Codes

hi,
i want list of CRM T. Codes.
Thanks in advance.
Shailendra

Hi,
BP      -Business Partner (Creation/View/Modification)
CIC0      -Customer Interaction Centre
CRMD_ORDER - CRM Transaction (Create/View/Modify)
SPRO - Configuration related settings
CRMD_CALL_LIST-Create/ Maintain Call list
IB51 / IB52 / IB53-Ibase Creation / Change / View
COMMPR01-Maintain Products
PPOSA_CRM-Display Organizational Model
SBDM-Bdoc maintenance
SMOEAC-     Administration console CRM Middleware
SMQ1,SMQ2      Queue monitoring transactions for inbound and outbound queues.
SMW01     Transaction for monitoring bdocs.
MIddleware t-code
Transactions     Transaction Codes
Work process overview     SM66
CPU and memory consumption     ST06
SAP memory and buffers     ST02
Database performance counters     ST04
Memory consumption per user     SM04 (on each application server)
Table call statistics     ST10
CPU & Memory Consumption on IPC Server     OS07
CRM Inbound Queue     SMQ2
CRM Outbound Queue     SMQ
Monitor Load     R3AM1
Define Request     R3AR2
Run Request      R3AR4
Request Business Partner     CRMM_BUPA_MAP
Send Business Partner     CRMM_BUPA_SEND
RFC statistics (client and server)     ST03
Errors in transactional RFCs     SM58
BDOC Statistics     SMWMFLOW
Response time statistics     ST03 & STAD
Error Tracking     SMWP
Q-Out Scheduler     SMQS
Q-In Scheduler     SMQR
Bdoc Error Tracking     SMW01 & SMW02
Short Dumps     ST22
Admin Console     SMOEAC
Process Overview     SM50
User List     AL08
Data Integrity Manager     SDIMA
Regards
Srinu

XI Transaction Codes

Hi All,
What are the Transaction codes used in XI
regards,
Hema

Hi Hema Shekar,
SAP XI TRANSACTION CODES
ALRTCATDEF- Alerts Configuration.
ALRTDISP - Display of Alerts Created
SXMB_IFR -> Start Integration Builder
SXMB_MONI -> Integration Engine - Monitoring
SXI_MONITOR -> XI: Message Monitoring
SXI_CACHE -> To Access IS runtime cache
SXI_SUPPORT -> Test all the Repository and Directory Objects
SXI_CACHE -> XI data directory cacheidx1 -> idoc adapter
IDX2 -> idoc metadata
IDX5 -> monitor idoc adapter
SM21 -> log di sistema
ST22 -> dump abap (analisi di eccezioni)
SMQ1 -> messages inbound e outbound queue
SMQ2 -> messages inbound e outbound queue
SMICM -> J2EE administration
ST06 -> stato della macchina cpu memory filesystem machine status - cpu, memory and file system.
ST03 -> workload.
SCC4 -> visualizza mandanti del sistema
WE20 -> partner profiles
sale - ale settings
RZ10 - edit system profile
SM59 ->mantain rfc destinations
BD64 -> mantain distribution model (trasformazioni)
SU01 -> users
AL08 -> list all logged users(user login logon)
SE10 -> Change Request
SE09 -> Change Request
WE05 -> All idocs
WE19 -> IDoc Test Tool
WE21 -> port definition
SE11 -> Data dictionary
SM21 -> log sistema xi
se37 -> mantain funcion modules
SICF -> http server configuration
SMGW -> trace, alzare livello di trace.
BD13 ->
BD64 -> modelli di distribuzione
PFCG -> Roles
tabella TSTC -> sap transactions codes
tabella TSTCT -> transaction descriptions
STMS -> transports management
SPAM -> apply ABAP support packages
SPAU -> manage objects after apply support packages
SE01 -> manage change requests
SLDCHECK -> Test SLD Connection
SLDAPICUST-> SLD API Customizing
SXMB_ADM -> Integration Engine - Administration
SXMB_MONI_BPE -> Process Engine - Monitoring
SE38 -> ABAP Editor
SE11 -> ABAP Dictionary
ST22 -> ABAP dump analysis
SPROXY-> ABAP Proxy Generation
SE80 -> Object Navigator
ABAPDOCU -> ABAP Documentation and Examples
SE24-> Class Builder
SM21-> Online System Log Analysis
SMQ1-> qRFC Monitor (Outbound Queue)
SMQ2-> qRFC Monitor (Inbound Queue)
RZ70-> SLD Administration
SM58-> Asynchronous RFC Error Log
SM59-> RFC Destinations (Display/Maintain)
SMICM-> ICM Monitor
WE60-> Documentation for IDoc types
BD87-> Status Monitor for ALE Messages
IDX1-> Port Maintenance in IDoc Adapter
IDX2-> Meta Data Overview in IDoc Adapter
WE05-> IDoc Lists
WE02-> Display IDoc
WE19-> Test tool
WE09-> Search for IDocs by Content
WE20-> Partner Profiles
WE21-> Port definition in XI
SE16-> Data Browser
SE93-> Maintain Transaction Codes
SM30-> Call View Maintenance
SU01-> User Maintenance
SM02-> System Messages
BD54 -Logical System Creation.
SWXF_PBUILDER -> for Detail BPM Process
SMQS - > to register the destination in QOUT scheduler
WEOUTQUEUE - > to start the queue processing
SMQR - > to register the queue
IDXPW - > to activate the IDOC message package
IDXP - > to monitor the message packages.
SWF_XI_CUSTOMIZING -> transaction to check prerequisites for integration processes.
Regards,
Ramesh.

Generate prov.xml for Creative Cloud. Return Code 27

We're trying to follow this guide (Creative Cloud Help | Using Adobe Provisioning Toolkit Enterprise Edition) to serialize a package (or something). We're stuck on generating prov.xml. My best attempt at an entry is:
C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\CCP\utilities\APTEE>adobe_prtk.exe --tool=VolumeSerialize --generate --serial=xxxx-xxxx-xxxx-xxxx-xxxx-xxxx --regsuppress=ss --eulasuppress --locales=en_US --provfilepath=C:\Program Fil
es (x86)\Common Files\Adobe\OOBE\PDApp\CCP
It says half of this is optional, but I'm skeptical.
Anyway, I'm getting return code 27. This indicates that it is unable to edit the prov.xml file specified. I didn't specify a prov.xml file, I'm trying to make one. The syntax I'm using differs from what I found on the page I linked, as that was giving me syntax errors. I lifted this off someone else's code. I've tried just about every variation I can think of. Any help would be appreciated.
This is on Windows

One of these links may help
http://helpx.adobe.com/creative-cloud/packager.html
http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

Code returns "null" and "0"s in main module - why?

I am coding a program that is in two modules. The main module serves it's standard function. The inventory class/module has three functions - 1) request stock input on 4 data points (1 String and 3 integers, one of which is a double) - 2) calculate the value of the inventory, and - 3) return string which reads out the 4 data points and the calculation showing the total value of the inventory. I've created the 3 functions in the inventory class/module, but obviously don't have them referring to each other correctly because when we come to the end of the program the output is null for the String and "0"s for the int/doubles. The code is below - any ideas about how to overcome the empty output? The code compiles fine and acts like it is going to work, but when it comes to the final command line it outputs
"null, which is item number 0, has 0 currently in stock at a price of 0.00 each. The total value of inventory in stock is 0.00"
Main module:
public class Main {
    @SuppressWarnings("static-access")
    public static void main(String[] args) {
        Inventory inventory = new Inventory(); //call Inventory class
        inventory.inventoryInput();
        Inventory results = new Inventory();
        results.inventoryResults(); //call for inventoryResults in Inventory class
}Inventory module:
import java.util.Scanner;
import static java.lang.System.out;
public class Inventory
//declare and initialize variables
   int itemNumber = 0;
   String productName;
   int stockAmount = 0;
   double productCost = 0;
   double totalValue = 0;
   String inventoryResults;
   //initialize scanner
   Scanner input = new Scanner(System.in);
   public void inventoryInput ()
   out.println("Please enter item number: "); //prompt for item number
      itemNumber = input.nextInt();
   out.println( "Enter product name/description: "); //prompt for product name
      productName = input.next();
   out.println("Quantity in stock: ");
      stockAmount = input.nextInt(); // prompt for stock quantity
   out.println("What is the product cost for each unit? ");
      productCost = input.nextDouble(); // prompt for product cost
    } // end inventoryInput
    public double totalValue( double stockAmount, double productCost )
      totalValue = stockAmount * productCost;
      return totalValue; // return stock value
    } // end totalValue
    public void inventoryResults()
    out.printf("%s, which is item number %d, has %d currently in stock at a " +
     "price of %.2f each. The total value of inventory in stock is " +
     "%.2f\n.", productName, itemNumber, stockAmount, productCost, totalValue);
    } // end inventoryResult
}// end method

justStartingOut wrote:
Actually my final solution was quite simple - I moved the calculation and final formated print text statements into the body of Inventory's class code. It now works. "Works" scares me a bit.
Someone cooking dinner might rummage about in the fridge and the cupboards to see what's there. Do imaginative things with what they come up with. And, with a bit of luck come up with something tasty or, at any rate edible.
A physician deciding on a medical treatment would do well to try a more cautious approach. A specific aim would be a good thing. And a calculated appreciation of the documented effects of each medicine. And how they interact.
It's up to you to determine which approach your coding should resemble. But it seems to me that your original Main class had a perfectly good reason to exist. It was a driver class whose purpose seemed to be to create and use an Inventory. (And using an Inventory is a very different thing from being an Inventory, so it made perfect sense to have two different classes.) To me it works or not, depending on whether it fufills that purpose. And what you have done is not so much solve the problem of it not working, as avoid that problem.
(If by "moved" you mean that the outputting now occurs as part of - or is called from - inventoryInput() then that is not a good thing. The input method should input: just input.)
I think that is because once the original input was loaded into the program (when I entered product number, name, price and value), the entries were dropped when the code switched to the next step. I think your intuition is entirely correct. In particular look at what your original main() method does (my comments replacing yours):
Inventory inventory = new Inventory(); // (A) Create an inventory...
inventory.inventoryInput(); // ... and put stuff into it
    // (B) Create some new entirely different (and empty) inventory...
Inventory results = new Inventory();
results.inventoryResults(); // ... and print its contentsInstead of creating a second inventory, try printing the results of the first one.
Edited by: pbrockway2 on Apr 22, 2008 12:37 PM
Whoops ... just read reply 2.
It might sense, though to call totalValue() at the end your input method (because at that point the total value has changed). Or do away with that method - which you worked on getting right in your other thread ;)

Sample source code for fields mapping in expert routine

Hi All
Iam writing the expert routine from dso to cube for example I have two fields in dso FLD1,FLD2
same fields in infocube also ,can any body provide me sample abap code to map source fields to target fields in expert routine,your help will be heighly appreciatble,it's an argent.
regards
eliaz

Basic would be ;
RESULT_FIELDS -xxx = <SOURCE_FIELDS> -xxx
you have the source fields as source, and result fields for as the target. In between you can check some conditions as in other routines of transformation.
BEGIN OF tys_SC_1, shows your source fields ( in your case DSO chars and key figures)
BEGIN OF tys_TG_1, , shows your result fields ( in your case Cube characteristics)
Hope this helps
Derya

T-Code SMQS

Similar Messages

Maybe you are looking for