T-SQL Matching Values or previous Values

Hi,
I'm wondering if someone can point me in the right direction for this particular query - using 2008R2.
I have a table that contains date, fruit, value and prices. The table only contains data for two fruit. What i want to find is the value of certain prices (0, 5, 10, 15) for the date range. The kicker is, if no value exist for the price, then use the
previous value.
So using the following
Date, Fruit, Value, Price
14/04 apple, 100, 0
14/04 orange, 101, 0
then it should return
14/04, 201, 0
but if there is no match, then it should use the previous value
14/04 apple, 25, 5
14/04 orange, 50, 4
then it should return
14/04 , 75, 5
I'm thinking a loop might be the way to go?

Sorry for the confusion, I'll try again with a better sample of the table:
Date                fruit      Value           Price
2014-04-12    Apple   100    0.00
2014-04-12    Apple   150    5.00
2014-04-12    Apple    200    24.00
2014-04-12    Orange    50    0.00
2014-04-12    Orange    100    2.00
2014-04-12    Orange    150    3.00
2014-04-12    Orange    200    4.00
2014-04-12    Orange    250    5.00
i am trying to find out what is the total value of apple's and oranges at a certain price i.e. 0, 5, 10, 15, 25 etc, but if there is no match in price then use the last available value.
so using the above example i would expect the following result
at price 0 it should be the total of the 0 prices i.e. 100 apples + 50 oranges.
at price 5 it should be the total of 5 prices i.e. 150 apples + 250 oranges.
at price 10 it should be the total for 10 prices, since there are no prices at 10, it should use the last available values i.e. 150 apples + 250 oranges.
at price 15, as there are no prices for 15, it would again take the last available values i.e. 150 apples + 250 oranges.
at price 20, as there are no prices for 20, it would again take the last available values i.e. 150 apples + 250 oranges.
at price 25. as there are no prices for 25, it would take the 24 price value for apples plus the 5 price for oranges i.e. 200 apples + 250 oranges
the result would look like this
price value
0     150
5     400
10   400
15   400
20    400
25    450
Many thanks.

Similar Messages

How to retrieve data from a table that match values in a varray?

Using - Oracle 10g Release 1.2
How to do write a sql to retrieve data matching values in a varray?
I have the following:
declare
    v_ct          NATURAL := 0;
    type t_cur is REF CURSOR;
    v_cursor t_cur;
    TYPE t_array IS VARRAY(100) OF NUMBER;
    l_codes t_array := t_array();
begin
    select count(*)
      into v_ct
      from table1
     where ind_cd IS NULL;
    IF v_ct = 0 THEN
        l_codes(1) := 1;
    END IF;
    select count(*)
      into v_ct
      from table2
     where cd IS NULL;
    IF v_ct = 0 THEN
        l_codes(2) := 2;
    END IF;
   OPEN v_cursor for
      select * from error_table where error_cd in (SELECT * FROM TABLE(CAST(l_codes AS t_array)) );
end;

This may not answer your question, but what about a pure SQL solution?
NOTE THIS IS UNTESTED:
SELECT *
FROM     ERROR_TABLE
WHERE     ERROR_CD IN
          SELECT      1
          FROM      table1
          HAVING      COUNT(*) > 0
          UNION ALL
          SELECT      2
          FROM      table2
          HAVING      COUNT(*) > 0
     )HTH!

Column count doesn't match value count at row 1, unknown number of columns

Hi,
I am making a program to read data from excel files as the above and store them in tables. I have managed to read all the data from excel files as a string and store them in a table.
ID Name Salary
50 christine 2349000
43 paulina 1245874
54 laura 4587894
23 efi 3456457
43 jim 4512878
But in my project I have several other files that have same cell that are blank as the above example
ID Name Salary
50 christine 2349000
43 paulina
laura 4587894
23 3456457
43 jim 4512878
and when i ran the same program i get this exception :
SQLException: Column count doesn't match value count at row 1
SQLState: 21S01
VendorError: 1136The code for creating the table and inserting the values is above:
private static String getCreateTable(Connection con, String tablename,
                    LinkedHashMap<String, Integer> tableFields) {
               Iterator iter = tableFields.keySet().iterator();
               Iterator cells = tableFields.keySet().iterator();
               String str = "";
               String[] allFields = new String[tableFields.size()];
               int i = 0;
               while (iter.hasNext()) {
                    String fieldName = (String) iter.next();
                    Integer fieldType = (Integer) tableFields.get(fieldName);
                    switch (fieldType) {
                    case Cell.CELL_TYPE_NUMERIC:
                         str = fieldName + " INTEGER";
                         break;
                    case Cell.CELL_TYPE_STRING:
                         str = fieldName + " VARCHAR(255)";
                         break;
                    case Cell.CELL_TYPE_BOOLEAN:
                         str = fieldName + " INTEGER";
                         break;
                    default:
                         str = "";
                         break;
                    allFields[i++] = str;
               try {
                    Statement stmt = con.createStatement();
                    try {
                         String all = org.apache.commons.lang3.StringUtils.join(
                                   allFields, ",");
                         String createTableStr = "CREATE TABLE IF NOT EXISTS "
                                   + tablename + " ( " + all + ")";
                         System.out.println("Create a new table in the database");
                         stmt.executeUpdate(createTableStr);
                    } catch (SQLException e) {
                         System.out.println("SQLException: " + e.getMessage());
                         System.out.println("SQLState:     " + e.getSQLState());
                         System.out.println("VendorError: " + e.getErrorCode());
               } catch (Exception e)
                    System.out.println( ((SQLException) e).getSQLState() );
                    System.out.println( e.getMessage() );
                    e.printStackTrace();
               return str;
          private static void fillTable(Connection con, String fieldname,
                    LinkedHashMap[] tableData) {
               for (int row = 0; row < tableData.length; row++) {
                    LinkedHashMap<String, Integer> rowData = tableData[row];
                    Iterator iter = rowData.entrySet().iterator();
                    String str;
                    String[] tousFields = new String[rowData.size()];
                    int i = 0;
                    while (iter.hasNext()) {
                         Map.Entry pairs = (Map.Entry) iter.next();
                         Integer fieldType = (Integer) pairs.getValue();
                         String fieldValue = (String) pairs.getKey();
                         switch (fieldType) {
                         case Cell.CELL_TYPE_NUMERIC:
                              str = fieldValue;
                              break;
                         case Cell.CELL_TYPE_STRING:
                              str = "\'" + fieldValue + "\'";
                              break;
                         case Cell.CELL_TYPE_BOOLEAN:
                              str = fieldValue;
                              break;
                         default:
                              str = "";
                              break;
                         tousFields[i++] = str;
                    try {
                         Statement stmt = con.createStatement();
                         String all = org.apache.commons.lang3.StringUtils.join(
                                   tousFields, ",");
                         String sql = "INSERT INTO " + fieldname + " VALUES (" + all
                                   + ")";
                         stmt.executeUpdate(sql);
                         System.out.println("Fill table...");
                    } catch (SQLException e) {
                         System.out.println("SQLException: " + e.getMessage());
                         System.out.println("SQLState: " + e.getSQLState());
                         System.out.println("VendorError: " + e.getErrorCode());
               }To be more specific the error it in the second row where i have only ID and Name in my excel file and only these i want to store. The third row has only Name and Salary and no ID. How i would be able to store only the values that i have and leave blank in the second row the Salary and in the third row the ID? Is there a way for my program to skip the blanks as empty value?
Edited by: 998913 on May 9, 2013 1:01 AM

In an unrelated observation, it appears you are creating new database tables to hold each document. I don't think this is a good idea. Your database tables should be created using the database's utility program and not programmatically. The database schema should hardly ever change once the project is complete.
As a design approach: One database table can hold your document names, versions, and date they were uploaded. Another table will hold the column names and data types. Another table can hold the data (type for all data = String). This way, you can join the three tables to retrieve a document. Your design will only consists of those three tables no matter how many unique documents you have. You probably should seek the advice of a DBA or experienced Java developer on exactly how structure those tables. My design is a rough layout.

Could not find selected item matching value "null" in CoreSelectOneRadio

Hello,
I get the following error with my selectOneChoice components:
WARNING Could not find selected item matching value "null" in CoreSelectOneRadio[UIXEditableFacesBeanImpl, id=dyna_2709976_11]
It seem that the component looks for a selectItem object qith its value set to null, so I tried to add one with a null value to no avail. The error don't cause any problem on the rendered page but it might spam the log when many users will be connected. Anyone every got this error and found a fix to stop it from appearing?
Regards,
Simon Lessard

you said you're using selectOneChoice but the error says radio. Is the information correct?

Could not find selected item matching value "New" warning message in ADF

Hi,
I have a selectOneChoice1 for a field which has the following fixed values in it. And while creating it, I selected the 'SelctionRequired' option so that this field will always have a value.
New
Pending
Completed.
While navigating to this page, I am trying to set the value to 'New' (Retrieved from the DB) in the backing bean. But when the page is rendered, the above field is empty with the above options in the list and jdev has the follwing error message in its log.
WARNING: Could not find selected item matching value "New" in CoreSelectOneChoice[UIXEditableFacesBeanImpl, id=selectOneChoice1]
Can any one help me with this issue?
Thanks,
Priya

The value of a list binding is the zero-based integer position in the list that is selected, not the actual underlying value.
The simplest way to set the value of an attribute is to use an attribute binding (which can be bound to the same attribute as the list binding). When you set the value of an attribute binding, it sets the value as you supply it. Otherwise, you'd need to set the list binding's value to the numerical "slot" number of the one you want to change the value to.

PL/SQL NUMERIC VALUE ERROR

Hi ,
We have following code and sending the data through attachnmet its giving the pl/sql numeric value error.
Please correct me.
__Code Details:::__
CREATE OR REPLACE PROCEDURE APPS.print_reports
IS
wfile_handle UTL_FILE.file_type;
lv_file VARCHAR2 (100);
lv_date VARCHAR2 (20);
mail_conn UTL_SMTP.connection;
lv_rep_headers VARCHAR2 (32000);
p_o_srv_result xxcss_prf_report_pkg.ref_cur_srv_prog;
lv_str_type XXCSS_PRF_STRING;
lv_line VARCHAR2 (32767);
lv_send_to VARCHAR2 (200);
lv_host_name VARCHAR2 (200) := 'outbound.cisco.com';
l_vtab CHAR := CHR (9);
lv_from VARCHAR2 (200) := '[email protected]';
lv_att_file_name VARCHAR2 (200);
lv_path VARCHAR2 (200);
p_request_type VARCHAR2 (1) := 'E';
p_request_id NUMBER;
errbuf VARCHAR2 (2000);
retcode NUMBER;
crlf VARCHAR2 (2) := CHR (13) || CHR (10);
lv_line_data Clob;
lv_clob clob;
BEGIN
BEGIN
SELECT VALUE
INTO lv_path
FROM v$parameter
WHERE NAME = 'utl_file_dir';
EXCEPTION
WHEN OTHERS
THEN
lv_path := '\tmp';
END;
lv_rep_headers :=
'REGION'
|| CHR (9)
|| 'COUNTRY'
|| CHR (9)
|| 'CUSTOMER NAME'
|| CHR (9)
|| 'ERP CUSTOMER NUMBER'
|| CHR (9)
|| 'PROFILE ID'
|| CHR (9);
FOR i IN ( SELECT DISTINCT srv_program_id srv_prgm
FROM xxcss_prf_cust_srv_programs
ORDER BY srv_program_id ASC)
LOOP
lv_rep_headers := lv_rep_headers ||i.srv_prgm || CHR (9);
END LOOP;
lv_rep_headers := lv_rep_headers || CHR (13);
BEGIN
XXCSS_PRF_REPORT_PKG.offline_daemon (p_request_id,
p_request_type,
p_o_srv_result,
errbuf,
retcode);
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.PUT_LINE ('Error in Offline');
END;
lv_att_file_name := 'Eligibility_reports'||p_request_id||'.xls';
-- DBMS_OUTPUT.PUT_LINE (lv_rep_headers);
wfile_handle := UTL_FILE.fopen (lv_path, lv_att_file_name, 'W');
UTL_FILE.put_line (wfile_handle, lv_rep_headers);
BEGIN
LOOP
FETCH p_o_srv_result INTO lv_str_type;
EXIT WHEN p_o_srv_result%NOTFOUND;
lv_line := NULL;
FOR i IN 1 .. lv_str_type.COUNT
LOOP
lv_line := lv_line || lv_str_type (i) || CHR (9);
END LOOP;
lv_line := lv_line || CHR (13);
UTL_FILE.put_line (wfile_handle, lv_line);
END LOOP;
lv_str_type.DELETE;
END;
UTL_FILE.fclose (wfile_handle);
BEGIN
wfile_handle := UTL_FILE.FOPEN (lv_path, lv_att_file_name, 'R');
-- DBMS_OUTPUT.PUT_LINE ('inside file');
LOOP
UTL_FILE.GET_LINE (wfile_handle, lv_line_data,32767);
-- DBMS_OUTPUT.PUT_LINE (lv_line_data);
lv_clob := lv_clob || lv_line_data;
END LOOP;
UTL_FILE.FCLOSE (wfile_handle);
EXCEPTION
WHEN OTHERS
THEN
errbuf := sqlerrm;
UTL_FILE.FCLOSE (wfile_handle); -- close file
DBMS_OUTPUT.PUT_LINE ('Exception'||errbuf);
NULL;
END;
DBMS_OUTPUT.PUT_LINE ('afterdata');
--DBMS_OUTPUT.PUT_LINE (lv_line_data);
SELECT email_id
INTO lv_send_to
FROM xxcss_prf_offline_report_tb
WHERE request_id = p_request_id AND report_type = p_request_type;
mail_conn := UTL_SMTP.open_connection (lv_host_name, 25);
UTL_SMTP.Helo (mail_conn, lv_host_name);
UTL_SMTP.Mail (mail_conn, 'sangrdas');
UTL_SMTP.Rcpt (mail_conn, lv_send_to);
UTL_SMTP.OPEN_Data(mail_conn) ;
DBMS_OUTPUT.PUT_LINE ('Sending Data');
UTL_SMTP.write_Data (
Mail_Conn,
'Date: '
|| TO_CHAR (SYSDATE, 'Dy, DD Mon YYYY hh24:mi:ss')
|| crlf
|| 'From: '
|| lv_from
|| crlf
|| 'Subject: ELIGIILITY Report_'
|| p_request_id
|| crlf
|| 'To: '
|| lv_send_to
|| crlf
|| 'MIME-Version: 1.0'
|| crlf
|| -- Use MIME mail standard
'Content-Type: multipart/mixed;'
|| crlf
|| ' boundary="-----SECBOUND"'
|| crlf
|| '-------SECBOUND'
|| crlf
|| 'Content-Type: text/plain;'
|| crlf
|| 'Content-Transfer_Encoding: 7bit'
|| crlf
|| 'some message text'
|| crlf
|| -- Message body
'more message text'
|| crlf
|| '-------SECBOUND'
|| crlf
|| 'Content-Type: text/plain;'
|| crlf
|| ' name="'|| lv_att_file_name||'"'
|| crlf
|| 'Content-Transfer_Encoding: 8bit'
|| crlf
|| 'Content-Disposition: attachment;'
|| crlf
|| ' filename="'
|| lv_att_file_name
|| '"'
||crlf
||crlf
||lv_clob
|| crlf
||crlf
||crlf
|| '-------SECBOUND');
UTL_SMTP.CLOSE_Data(mail_conn) ;
UTL_SMTP.quit (mail_conn);
DBMS_OUTPUT.PUT_LINE ('After Mail');
EXCEPTION
WHEN OTHERS THEN
errbuf := sqlerrm;
DBMS_OUTPUT.PUT_LINE ('ERROR Sending Data'||errbuf);
ROLLBACK;
END;
/

Yet again, opening a new thread for an existing issue...
Need help in UTL file
Same old, same old...
need a report code
need to create the header dynamically for a report
Would have thought you'd get the idea of posting on the forums by now.

No matching values were found ... security issue??? help

Hi,
A few days ago when I added multiple students with Quick Enroll a Student I could see them from Campus Community or Quick Enroll -> Find an Existing Value.
Then I created, from Application Designer, some groups with special access to Tree Manager and also 2 interface components for existing components (subjects and courses).
But when tried Quick Enroll -> Find an Existing Value again it didn't return any results: "no matching values were found".
From Campus Community is the same result, no match.
I deleted both the groups and the component interfaces created, but the result is the same, I can not view my enrolled students anymore. What could be the problem? Some security problem?
I have Read/Write to the Academic Institution, the Campus, the Academic Organization, all Academic Careers, Programs, and Plans.
Thank you,
Anda

You mean to see if the students exist in the database? The answer is yes, they do exist.
One more thing, I can see the enrolled students from
Record and Enrollment -> Enroll Students -> Enrollment Request Search
But from
Record and Enrollment -> Enroll Students -> Enrollment I can't see them.
Any suggestion is appreciated, thank you!
Anda

WARNING: ADFv: Could not find selected item matching value ...

Using Windows JDev 11.1; I have an entity object with an attribute which has a LOV configured to supply a select-one-choice render. The LOV query requires that a bind variable be supplied. When creating a new record in the entity via the VO, I can use the ViewImpl to create a new row, retrieve the RowSet which corresponds to the attribute LOV query, set the named where clause parameter, and I'm away. When updating however, I'm getting the following error reported:
09/12/2009 2:44:04 PM oracle.adfinternal.view.faces.model.binding.FacesCtrlListBinding getInputValue
WARNING: ADFv: Could not find selected item matching value EMPLOYER of type: java.lang.String in the list-of-values.
I can't supply the bind variable value before the row is instantiated (and presumably populated with the current value/key) because the View Accessor RowSet is only accessible via the RowImpl. If after the query has executed, I apply the bind variable value, re-execute the RowSet query, I can see that it's populated, and I can create a RowSetIterator to loop through the LOV RowSet and confirm that the key/value is there. I can even setCurrentRow on the RowSet but I still find that the above error appears in the serve log output seemingly after all this code executes.
So my question is what is the technique for supplying bind variables to attribute LOV View Accessors as part of an underlying EO object query.
In the run-time, the list items appear unpopulated (current value and list items). If I reload the page, it all comes up fine, which could tend to suggest that a PPR event might fix me up, but I would prefer to know how this should be done.
Thanks in advance.
Edited by: robli on Dec 9, 2009 9:01 PM

Hi,
Is your issue resolved. I'm facing similar issue. I have created a viewaAccessors in EO, associated these to ViewObject attributes as List of Values.
I created the table in UI using the ViewObject.
I see those as selectOneChoice but not values (Empty list).
If I create new record in the table by CreateInsert. table now shows the ListOfvalues.
any Idea what am I missing.
Thanks,
Satya
Edited by: stammine on Mar 2, 2010 4:09 PM

Get the difference between two java.sql.Time values

Hi, I'm developping a web application in which I need to to subtract one java.sql,Time value from another. The two values are stored in a database field of type DateTime. I used following code
java.sql.Time start_time=resultset.getTime("startTime");
java.sql.Time end_time=resultset.getTime("startTime");
java.sql.Time diff=start_time-end_time;
can u give me any comment on this code

Remember what the Date/Time object in Java represents - a single point in time.
Subtracting one from another gives you an amount of time elapsed between the two dates. Fine.
Making a new Date out of that number is incorrect. The number no longer represents a point in time, but rather a duration.
Its like saying "There is 10 seconds difference between the two times, so the time is now 1 Jan 1970, 00:00:10 GMT".
The simple and stupid calculation is to take the milliseconds difference, and divide it to get to a more humanly readable value.
// duration in milliseconds
long duration = ?????
long durationInSeconds = duration / 1000;
long durationInMinutes = duration / (60 * 1000);
long durationInHours = duration / (60 * 60 * 1000);
// careful - not always true!
long durationInDays = duration / (24 * 60 * 60 * 1000);
NOTE: The "daysBetween" calculation is potentially complicated by Daylight Time adjustments. The simple approach does not necessarily work exactly.
Cheers,
evnafets

Deleting rows from a table matching values from an ascii file

Hi All,
I have an ASCII file with 12,000 lines. Each line represents a value (you may call this as bad data) that matches a database column value in table. I have to delete all the rows from a database table (~ 400,000 rows) where a column value matches the bad data value. Linux is the OS is where SQLPLUS client is installed and I can execure any SQL queries from this Linux server. Oracle DB server is 10g.
Any input on how to do this will be helpfull to me. I am not a database programmer so if any details will be appreciated.
Thanks

Hi,
That's going to be very slow (among other problems) if you don't have the bad data in a table. An index-organized table would probably be best.
Assuming the data data are uinique strings, up to 30 characters long, and that you don't need any other columns, you can create a table like this:
CREATE TABLE bad_data
(   bad_txt    VARCHAR (30)
, CONSTRAINT bad_data_pk PRIMARY KEY (bad_txt)
) ORGANIZATION INDEX;SQL*Loader is one way of getting the data from the file (doesn't have to be on the database server; it can be on your client machine) into the table.
Once you have a table, actually removing the rows from the big table might be as simple as:
DELETE big_table
WHERE   column_a IN
        (   SELECT bad_txt
            FROM    bad_data
;

Mediator - convert XSD datetime to SQL date value

Fusion 11g, JDev 11.1.1, W server 2008
Hi there,
using JDev we've defined a DB adapter (towards an ORACLE schema), which basically serves two operations: INSERT and SELECT. On the DB table we've got a DATE_TIME while on on the other side we've defined a wsdl where the INPUT operation takes as parameter an XSD DATETIME value.
The values have different structures and so we've started to play with the "Assign Values" function on the Mediator component, unfortunately without any success.
Right now our expression is the following
from
ora:formatDate($in.newEventParam/newEventParam/ns:executionTime,"dd-MMM-yy")
to
$out.LogCollection/top:LogCollection/top:Log/top:when
As first question I would like to ask you if our approach is correct and in that case what's wrong with our expression as we tried to use the same pattern as we use in SQL.
Second, we performed some tests using the EM console. On test failure it shown a stack trace saying only that there was a problem performing a transformation. That's a bit too less, especially when transformation is done on large amount of values. Is there any way to increase trace level and get further details on which transformation didn't work out?
Thanks in advance
Alessandro Ilardo

Thanks Eric for the link. That helped me to get further details about the issue but unfortunately not enough to locate the cause.
So here I definitely have an issue with the composite application and perhaps another one on getting a SOAP trace from the Mediator log. Even with the finest log level enabled I couldn't see what the Mediator receives from outside.
The first problem instead, seams to be a missing SOAP parameter, I assume that's why on the log I see this
[WEBSERVICE.name: AuditService] [J2EE_APP.name: soa-infra] [composite_instance_id: 40011] Transformation failed[[
oracle.tip.mediator.infra.exception.MediatorException: ORAMED-01203:[No Part]No part exist with name "newEventParam" in source message.Possible Fix:Review the transformation definition in mplan.Contact Oracle Support if the error cannot be fixed.
     at oracle.tip.mediator.service.transformation.XSLTransformer.getPartDocument(XSLTransformer.java:221)
[J2EE_APP.name: soa-infra] [composite_instance_id: 40011] Got an exception: java.lang.NullPointerException[[
oracle.tip.mediator.infra.exception.MediatorException: ORAMED-01201:[Error in transform operation]Error occurred while transforming payload.Possible Fix:Review the XSL or source payload. Either the XSL defined does not match with the payload or payload is invalid.
In this routing there are basically 2 things that take place, an XSL mapping and an Assign value expression.
Everything is goes fine until we perform a test from the EM, there we get the error.
Unless someone has further tips on this issue I am considering to make a call from SOAPUI and place WS Monitor in the middle to make sure if the mistake is in the application or platform.
External WSDL
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://xml.virtual-lab.eu/schema/poc-soa/audit/wsdl" xmlns:ns="http://xml.virtual-lab.eu/schema/poc-soa/audit/def" targetNamespace="http://xml.virtual-lab.eu/schema/poc-soa/audit/wsdl">
     <wsdl:types>
          <schema xmlns="http://www.w3.org/2001/XMLSchema">
               <import namespace="http://xml.virtual-lab.eu/schema/poc-soa/audit/def" schemaLocation="xsd/AuditParamsDef.xsd"/>
          </schema>
     </wsdl:types>
     <wsdl:message name="addNewRequestMessage">
          <wsdl:part name="newEventParam" type="ns:add"/>
     </wsdl:message>
     <wsdl:message name="searchRequestMessage">
          <wsdl:part name="searchParams" type="ns:search"/>
     </wsdl:message>
     <wsdl:message name="searchResponseMessage">
          <wsdl:part name="returnParam" type="ns:eventObj"/>
     </wsdl:message>
     <wsdl:portType name="AuditPortType">
          <wsdl:operation name="addNewEvent">
               <wsdl:input message="tns:addNewRequestMessage"/>
          </wsdl:operation>
          <wsdl:operation name="searchForEvents">
               <wsdl:input message="tns:searchRequestMessage"/>
               <wsdl:output message="tns:searchResponseMessage"/>
          </wsdl:operation>
     </wsdl:portType>
     <wsdl:binding name="AuditBinding" type="tns:AuditPortType">
          <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
          <wsdl:operation name="addNewEvent">
               <soap:operation soapAction="urn:#addNewEvent"/>
               <wsdl:input>
                    <soap:body use="literal"/>
               </wsdl:input>
          </wsdl:operation>
          <wsdl:operation name="searchForEvents">
               <soap:operation soapAction="urn:#searchForEvents"/>
               <wsdl:input>
                    <soap:body use="literal"/>
               </wsdl:input>
               <wsdl:output>
                    <soap:body use="literal"/>
               </wsdl:output>
          </wsdl:operation>
     </wsdl:binding>
     
</wsdl:definitions>
XSL
<?xml version="1.0" encoding="UTF-8" ?>
<?oracle-xsl-mapper

<mapSources>
<source type="WSDL">
<schema location="../AuditService.wsdl"/>
<rootElement name="newEventParam" namespace=""/>
<rootElementDatatype name="add" namespace="http://xml.virtual-lab.eu/schema/poc-soa/audit/def"/>
</source>
</mapSources>
<mapTargets>
<target type="WSDL">
<schema location="../AuditBackEndService.wsdl"/>
<rootElement name="LogCollection" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/AuditBackEndService"/>
</target>
</mapTargets>

?>
<xsl:stylesheet version="1.0"
xmlns:top="http://xmlns.oracle.com/pcbpel/adapter/db/top/AuditBackEndService"
xmlns:xpath20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:mhdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.mediator.service.common.functions.MediatorExtnFunction"
xmlns:oraext="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:dvm="http://www.oracle.com/XSL/Transform/java/oracle.tip.dvm.LookupValue"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/db/SOA-POC/AuditService/AuditBackEndService%2F"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:med="http://schemas.oracle.com/mediator/xpath"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:ns="http://xml.virtual-lab.eu/schema/poc-soa/audit/def"
xmlns:xdk="http://schemas.oracle.com/bpel/extension/xpath/function/xdk"
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:socket="http://www.oracle.com/XSL/Transform/java/oracle.tip.adapter.socket.ProtocolTranslator"
exclude-result-prefixes="xsi xsl ns xsd top tns plt wsdl xpath20 bpws mhdr oraext dvm hwf med ids xdk xref ora socket">
<xsl:template match="/">
<top:LogCollection>
<top:Log>
<top:who>
<xsl:value-of select="/newEventParam/ns:fromUser"/>
</top:who>
<top:when/>
<top:whichClient>
<xsl:value-of select="/newEventParam/ns:usingClient"/>
</top:whichClient>
<top:whichSys>
<xsl:value-of select="/newEventParam/ns:onSys/@ns:which"/>
</top:whichSys>
<top:ipClient>
<xsl:value-of select="/newEventParam/ns:fromIP"/>
</top:ipClient>
<top:wsOperation>
<xsl:value-of select="/newEventParam/ns:callingWS_Operation"/>
</top:wsOperation>
</top:Log>
</top:LogCollection>
</xsl:template>
</xsl:stylesheet>
Internal WSDL
<?xml version="1.0" encoding="UTF-8"?>
<toplink:object-persistence version="Oracle TopLink - 11g Release 1 (11.1.1.1.0) (Build 090527)" xmlns:opm="http://xmlns.oracle.com/ias/xsds/opm" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:toplink="http://xmlns.oracle.com/ias/xsds/toplink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<opm:name>AuditBackEndService-OR</opm:name>
<opm:class-mapping-descriptors>
<opm:class-mapping-descriptor xsi:type="toplink:object-relational-class-mapping-descriptor">
<opm:class>AuditBackEndService.Log</opm:class>
<opm:alias>LOG</opm:alias>
<opm:primary-key>
<opm:field table="LOG" name="ID" xsi:type="opm:column"/>
</opm:primary-key>
<opm:events xsi:type="toplink:event-policy"/>
<opm:querying xsi:type="toplink:query-policy">
<opm:queries>
<opm:query name="AuditBackEndServiceSelect" xsi:type="toplink:read-all-query">
<opm:criteria operator="and" xsi:type="toplink:logic-expression">
<toplink:left operator="and" xsi:type="toplink:logic-expression">
<toplink:left operator="equal" xsi:type="toplink:relation-expression">
<toplink:left name="whichSys" xsi:type="toplink:query-key-expression">
<toplink:base xsi:type="toplink:base-expression"/>
</toplink:left>
<toplink:right xsi:type="toplink:parameter-expression">
<toplink:parameter name="sys" xsi:type="opm:column"/>
</toplink:right>
</toplink:left>
<toplink:right operator="greaterThanEqual" xsi:type="toplink:relation-expression">
<toplink:left name="when" xsi:type="toplink:query-key-expression">
<toplink:base xsi:type="toplink:base-expression"/>
</toplink:left>
<toplink:right xsi:type="toplink:parameter-expression">
<toplink:parameter name="fromWhen" xsi:type="opm:column"/>
</toplink:right>
</toplink:right>
</toplink:left>
<toplink:right operator="lessThanEqual" xsi:type="toplink:relation-expression">
<toplink:left name="when" xsi:type="toplink:query-key-expression">
<toplink:base xsi:type="toplink:base-expression"/>
</toplink:left>
<toplink:right xsi:type="toplink:parameter-expression">
<toplink:parameter name="toWhen" xsi:type="opm:column"/>
</toplink:right>
</toplink:right>
</opm:criteria>
<opm:arguments>
<opm:argument name="sys">
<opm:type>java.lang.String</opm:type>
</opm:argument>
<opm:argument name="fromWhen">
<opm:type>java.lang.String</opm:type>
</opm:argument>
<opm:argument name="toWhen">
<opm:type>java.lang.String</opm:type>
</opm:argument>
</opm:arguments>
<toplink:reference-class>AuditBackEndService.Log</toplink:reference-class>
<toplink:container xsi:type="toplink:list-container-policy">
<toplink:collection-type>java.util.Vector</toplink:collection-type>
</toplink:container>
</opm:query>
</opm:queries>
</opm:querying>
<opm:attribute-mappings>
<opm:attribute-mapping xsi:type="toplink:direct-mapping">
<opm:attribute-name>id</opm:attribute-name>
<opm:field table="LOG" name="ID" xsi:type="opm:column"/>
<toplink:attribute-classification>java.math.BigDecimal</toplink:attribute-classification>
</opm:attribute-mapping>
<opm:attribute-mapping xsi:type="toplink:direct-mapping">
<opm:attribute-name>who</opm:attribute-name>
<opm:field table="LOG" name="WHO" xsi:type="opm:column"/>
<toplink:attribute-classification>java.lang.String</toplink:attribute-classification>
</opm:attribute-mapping>
<opm:attribute-mapping xsi:type="toplink:direct-mapping">
<opm:attribute-name>when</opm:attribute-name>
<opm:field table="LOG" name="WHEN" xsi:type="opm:column"/>
<toplink:attribute-classification>java.sql.Timestamp</toplink:attribute-classification>
</opm:attribute-mapping>
<opm:attribute-mapping xsi:type="toplink:direct-mapping">
<opm:attribute-name>whichClient</opm:attribute-name>
<opm:field table="LOG" name="WHICH_CLIENT" xsi:type="opm:column"/>
<toplink:attribute-classification>java.lang.String</toplink:attribute-classification>
</opm:attribute-mapping>
<opm:attribute-mapping xsi:type="toplink:direct-mapping">
<opm:attribute-name>whichSys</opm:attribute-name>
<opm:field table="LOG" name="WHICH_SYS" xsi:type="opm:column"/>
<toplink:attribute-classification>java.lang.String</toplink:attribute-classification>
</opm:attribute-mapping>
<opm:attribute-mapping xsi:type="toplink:direct-mapping">
<opm:attribute-name>ipClient</opm:attribute-name>
<opm:field table="LOG" name="IP_CLIENT" xsi:type="opm:column"/>
<toplink:attribute-classification>java.lang.String</toplink:attribute-classification>
</opm:attribute-mapping>
<opm:attribute-mapping xsi:type="toplink:direct-mapping">
<opm:attribute-name>wsOperation</opm:attribute-name>
<opm:field table="LOG" name="WS_OPERATION" xsi:type="opm:column"/>
<toplink:attribute-classification>java.lang.String</toplink:attribute-classification>
</opm:attribute-mapping>
</opm:attribute-mappings>
<toplink:descriptor-type>independent</toplink:descriptor-type>
<toplink:caching>
<toplink:cache-type>weak-reference</toplink:cache-type>
<toplink:always-refresh>true</toplink:always-refresh>
</toplink:caching>
<toplink:remote-caching>
<toplink:cache-type>weak-reference</toplink:cache-type>
</toplink:remote-caching>
<toplink:instantiation/>
<toplink:copying xsi:type="toplink:instantiation-copy-policy"/>
<toplink:tables>
<toplink:table name="LOG"/>
</toplink:tables>
<toplink:structure>structureName</toplink:structure>
</opm:class-mapping-descriptor>
</opm:class-mapping-descriptors>
<toplink:login xsi:type="toplink:database-login">
<toplink:platform-class>oracle.toplink.platform.database.oracle.Oracle9Platform</toplink:platform-class>
<toplink:user-name></toplink:user-name>
<toplink:connection-url>null</toplink:connection-url>
</toplink:login>
</toplink:object-persistence>

Search database for a matching value

An existing database saves the results from a test as col 1 "serial number" col 2 date etc.
There is now a requirement to search on the serial number and display any results related to it (rows).
I have the database toolset and have started by using the SQL vi to extract the serial number passing a recordset ref number. I am at the point where I now need to select the row for that ref number but was wondering if it would be better to just read in the database to an array and then do a search on the serial number col looking for matching text, obtain the row of the array where matches occur and then display those rows, or is this route really long winded and should stick with the SQL vi?
Thanks
Jack
Labview Version 8.5
Labview Version 8.6
Labview Version 2013
Solved!
Go to Solution.

Paul
Thanks for reply and I will do as you suggest and go with the SQL vi. I have a few problems using this vi so far. The first is that to Search say the Status field for Pass or Fail I used the query:-
select Status from TestDetails1 where Status="Pass"
This instruction resulted in an error message. So I tried a different field Ambient where the temperature is logged:-
select Ambient from TestDetails1 where Ambient=23 (ambient temperature at 23 deg C)
This command line worked fine and brought up all instances where 23 occurred.
Also when I use the vi 'Fetch recordset data' I get just the values searched on not th erows to which they belong.
Thanks
John
Labview Version 8.5
Labview Version 8.6
Labview Version 2013

Can't display MS SQL datetime value in SQL Developer 1.5.1

Hi All,
I try to select the datetime value from MS SQL Server and the SQL Developer display strange value like this:
oracle.sql.TIMESTAMP@f37160
The problem does not exists in the previous version. And any body can help to solve it?
Thanks.

ISSUE CLARIFICATION
====================
Attempting to view records in a table from a MS SQL Server 2005 schema. All fields are ok, except
the datetime fields.
Getting Oracle.sql.date@E4F4012
This worked (actually still works) with SQL Developer 1.2.1. In fact, I see both on my screen and
1.2.1 views the fields fine, 1.5.4 does not.
ISSUE VERIFICATION
===================
Verified the issue by the screen shots
DATA COLLECTED
===============
SCREEN SHOTS
SR6930954.994_SQLDeveloper.ppt
CAUSE DETERMINATION
====================
Missing option in SQL Server 2005 default datatype mapping rules.
CAUSE JUSTIFICATION
====================
Note 458294.1
Bug 6360558 / Bug 6378114
PROPOSED SOLUTION(S)
======================
use the workaround provided in Note: 458294.1
PROPOSED SOLUTION JUSTIFICATION(S)
====================================
Note 458294.1
Bug 6360558 / Bug 6378114
SOLUTION / ACTION PLAN
=======================
You can use the following workaround if you want SQL Server 2005 DATETIME datatype map to Oracle DATE:
- On the Captured Model, select 'Set Data Mapping'
- Click on Apply in the 'Set Data Map' Window, this will create a record in the Repository
- Open a connection with the Repository database
- Click on Tables
- Click on table MIGR_DATATYPE_TRANSFORM_RULE
- Click on the "Data" Tab
- Sort on column "SOURCE_DATA_TYPE_NAME"
- Look for "DATETIME"
- Change the value of column "TARGET_DATA_TYPE_NAME" from TIMESTAMP to DATE
- Change the value of column "TARGET_SCALE" from 6 to (null)
- Commit the change.
Remark: This workaround is only suitable if the repository contains only 1 captured model, otherwise we need to identify the proper MAP_ID.
KNOWLEDGE CONTENT
=================
Platform / Port Specific? = NO
Knowledge content not created because the following note already addresses this issue: Note.458294.1
This problem has been identified as a bug. And it has been fixed in Version 2.0.0 (Future Release)
For available workaround refer to the above tags and NOTE: 458294.1
Regards,
Srikanth
Oracle Support Services.
Currently Support is not having any information of the release date for sql developer V2.0.0
Regards,
Srikanth

Query to get not matching values

Hello ,
i want to create a query between two tables , the name column is a primary key in first table and forigen key on the second table .
t1--
name varchar2(20) -- primary key
value number(11,2)
t2--
name varchar2(20) -- forigen key
value number(11,2)
i am trying to get the name which the values is not match in both table .
note: the second table maybe there is more then 1 record for the name
Edited by: oracleuser on Aug 29, 2010 1:06 AM

Hello
The query works well for me
SQL> select * from t1;
NAME      VALUE
divya        10
deepa        11
SQL> select * from t2;
NAME      VALUE
deepa        11
divya        20
divya        22
SQL> select t1.name,t1.value,t2.value
2 from t1,t2
3 where t1.name=t2.name and t1.value != t2.value;
NAME      VALUE     VALUE
divya        10        20
divya        10        22If this is not what you want, then explain with some sample data

SSMS 2012: Import XML File to SQL Table - 'value' is not a recognized built-in function name!!??

Hi all,
I have the following xml file (books1.xml):
<bookstore>
<book>
<BookID>1</BookID>
<title>Everyday Italian</title>
<author>Giada De Laurentiis</author>
<year>2005</year>
<price>30.00</price>
</book>
<book>
<BookID>2<BookID>
<title>Harry Potter</title>
<author>J K. Rowling</author>
<year>2005</year>
<price>29.99</price>
</book>
<book>
<BookID>3<BookID>
<title>XQuery Kick Start</title>
<author>James McGovern</author>
<year>2003</year>
<price>49.99</price>
</book>
<book>
<BookID>4<BookID>
<title>Learning XML</title>
<author>Erik T. Ray</author>
<year>2003</year>
<price>39.95</price>
</book>
</bookstore>
In my Microsoft SQL Server 2012 Management Studio, I executed the following SQL Query code:
--XQuery w3schools example using books1.xml in C:\Temp folder
---SQL Query W3books Title
---9 March 2015
USE XML_XQUERY
GO
CREATE TABLE W3Books(
BookID INt Primary Key,
Title VARCHAR(30));
INSERT INTO W3Books (BookID, Title)
SELECT x.book.query('BookID'), value('.', 'INT'),
x.book.query('title'), value('.', 'VARCHAR(30)')
FROM (
SELECT CAST(x AS XML)
FROM OPENROWSET(
BULK 'C:\Temp\books1.xml',
SINGLE_BLOB) AS T(x)
) AS T(x)
CROSS APPLY x.nodes('W3Books/book') AS x(book);
SELECT BookID, Title
FROM W3Books;
I got the following error messages:
Msg 195, Level 15, State 10, Line 7
'value' is not a recognized built-in function name.
Msg 156, Level 15, State 1, Line 16
Incorrect syntax near the keyword 'AS'.
I don't know why I got the error of 'value' is not a recognized built-in function name. Please kindly help and tell me what is wrong in my code and how to correct the error.
Thanks, Scott Chang
P. S.
(1) I mimicked the xml file and SQL Qeury code of Import XML File to SQL Table in
http://pratchev.blogspot.com/2008/11/import-xml-file-to-sql-table.html. The xml file and the code of this sample worked in my SSMS 2012 program.
(2) I am learning the "CAST" and "CROSS APPLY" in the Create Instances of XML Data of Microsoft MSDN - it is very abstract to me.

Hi Stan210, Thanks for your nice response.
I corrected my xml file as you pointed out.
I made some changes in some code statements of my SQLQueryW3BookTitle.sql as you instructed:
--XQuery w3schools example using books1.xml in C:\Temp folder
---SQL Query W3books Title
---10 March 2015
USE XML_XQUERY
GO
CREATE TABLE W3Books(
BookID INt Primary Key,
Title VARCHAR(30));
INSERT INTO W3Books (BookID, Title)
SELECT x.book.value('/BookID[1]', 'INT'),
x.book.value('/title[1]', 'VARCHAR(30)')
FROM (
SELECT CAST(x AS XML)
FROM OPENROWSET(
BULK 'C:\Temp\books1.xml',SINGLE_BLOB) AS T(x)
) AS T(x)
CROSS APPLY x.nodes('bookstore/book') AS x(book);
SELECT BookID, Title
FROM W3Books;
I executed my revised sql and I got the following Message and Results:
Msg 515, Level 16, State 2, Line 6
Cannot insert the value NULL into column 'BookID', table 'XML_XQUERY.dbo.W3Books'; column does not allow nulls. INSERT fails.
The statement has been terminated.
(0 row(s) affected)
Results:
BookID Title
I don't know why I just got the names of columns in Results and the "Cannot insert the value NULL into column 'BookID', table 'XML_XQUERY.dbo.W3Books'; column does not allow nulls, insert fails." in Messages. Please kindly help, advise me
how to correct the errors and respond again.
Many Thanks again,
Scott Chang

T-SQL Matching Values or previous Values

Similar Messages

Maybe you are looking for