T420 w/ Intel graphics no image via displayport

I've just got a T420 and a ThinkVision 24" monitor. If I connect the monitor via displayport (no converters - straight DP-DP cable), windows gives me a "new device" sound and I can see the ThinkVision display in the "screen resolution" and display settings, but I'm unable to get any picture on external monitor.
It just identifies the DP input and it goes straight to "power saving mode".
When i select clone displays, i get 1024x768 resolution on the laptop display and no image on the ext display.
I also used Lenovo sys update, and BIOS and drivers are the newest.

No idea why it shouldn't work then, I always had problem with lenovo graphics driver and window network, both have weird problems once in a while.
I notice that the thinkvision has anlaog input? ie VGA, have you tried that and see if it was driver problem or displayport problem?
suggesion:
a) Have you tried the monitor inf file at http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/79oi26ww.exe ?
b) And the intel chipset update
c) Also, you can try download from intel their device checker http://www.intel.com/p/en_US/support/detect and perhaps install a non lenovo driver and see if it show the

Similar Messages

Imac 27" Intel Core 7 CPU. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware scan and all is fine. Did clean wipe from Mavrick back

Imac 27" Intel Core7 CPU 16 Gig RAM. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware diagnostic and all is fine. Did clean wipe from Mavrick back to Mountain Lion but problem remains. Apple Store can do no more.

I did some more digging, it appears to be a backlight problem only. I can see the screen very dimly if I use a bright flashlight in a very dark room. It also seems to run ok if the brightness is turned down a LOT.
So I'm thinking this is a LED driver board issue or the display itself. I'll open it up and check the connection between the two and see if I can get any more clues. At least I can use it somewhat now by dimming the display significantly...

How to save customized skin (via Intel graphics) from session to session

Hi-I'm a novice so hopefully there's an easy resolution. I've customized the Firefox theme using Intel HD graphics "color enhancement." Even though the coloring setting are saved via the Intel card, when I start a new Firefox session the theme reverts to the original shadings. I can change back to my customized theme by opening the Intel Control Center but I'd like to avoid that step.
Is there a way to keep my settings as default without fiddling with css editing which I'm too stupid to do? Thanks for any thoughts

Thanks for responding! It's a trivial issue but with OCD I can spend hour after hour trying to get things as I want them.
I found Flaminglow as a theme that was a bit unique. But I wanted the saturation, contrast, etc. altered, which I did with Intel graphics program that was pre-installed. I can save the color enhancement i.e. "a" scheme, "b", etc. with Intel. But when I restart the pc it reverts to the default colors of Flaminglow and I have to go to the Intel program and enter the saved scheme. I don't want to have to do that each time I turn the PC on. I've included a screenshot of the homepage and one of the Intel control center.
I thought that perhaps a session saving add on may work but just don't know. Make any sense, lol? Thanks

Audio will not transmit to TV via Displayport

Please read carefully as I have spent 8 hours on this issue and if you have a simple answer, I have probably already tried it. I want to explain the problem in full detail and get some real tech experts to help. Thank you!! The first thing you need to know about the Lenovo Thinkcentre 6234-A111 is that there is no HDMI output. There is a displayport output. Therefore, I bought this adapter: http://www.walmart.com/ip/V7-DisplayPort-to-HDMI-Adapter/29530877 I then ran an HDMI cable to HDMI 1 on my TV. The picture transmits. The audio does not. I have already tried the following common "solution:" 1. Right click audio icon2. select playback devices3. Right click in blank area to make sure that disconnected and disabled devices are showing After performing these steps, there should appear a TV icon called HDMI audio. You should then be able to set this as the default. The problem is that this TV icon does not appear. There is also no option for HDMI audio in the device manager. I have determined that the thinkcentre refuses to recognize that my TV has speakers. It only recognizes my TV as a monitor, which shows up as "generic PnP monitor" under device manager. Please tell me how I can force my computer to recognize the audio device attached via HMDI cable via displayport adapter. Thank you for your help! I am desperate. If this does not work it means time & money wasted.

I am adding to this thread to hopefully help others with the same issue. I found the exact model (M58P) and type (6234) of my PC here: http://support.lenovo.com/us/en/products/desktops-and-all-in-ones/thinkcentre-m-series-desktops/thinkcentre-m58p/documents/PD000963?tabName=ProductParts. The type of computer (in this case, 6234) is incredibly important because it tells you whether you require an NVIDIA graphics driver, or an AMD Radeon Graphics Driver. In this case, my PC runs on an ATI Radeon HD3470 256M PCIe Graphcis card. This type requires a graphics driver for the HD 3000 series. After much browsing, I found it: http://support.amd.com/en-us/download/desktop/legacy?product=legacy2&os=Windows%207%20-%2032. From what I can tell, my PC does not currently have a Radeon Driver, which is completely bewildering. Windows 7 is supposed to do this stuff for me automatically. Somehow the Intel Chipset is running my integrated graphics card, but not allowing audio through the displayport. I am not home, but I am very excited to try out this Radeon driver tonight. Does anyone know if this can run side-by-side with the Intel G43-G45 chipset (under display adapters in device manager), or will I need to uninstall that chipset before I can run this Radeon Driver?

Intel graphics drivers performance improvement

Just a heads up for people looking to get a little more performance from the Intel on CPU graphics...
I noticed that Lenovo has updated the Intel graphics drivers to version 8.15.10.2418: http://download.lenovo.com/lenovo/content/ddfm/MIGR-77280.html
My i5 X220 Win 7 x64 machine had 8.15.10.2342 installed, and I decided to go ahead and install the recent update.
After installing this and rebooting, I re-ran the Windows Experience Index assessment and noticed that the Graphics subscore has moved to 6.3 from the prior 5.9. The Gaming graphics subscore remains the same as before at 6.3. I haven't noticed any day to day difference yet, but perhaps others will.
Note that this update isn't showing up in Lenovo System Update (at least not for me anyway). But you can manually download and install from the link above.

I'm not sure why they would be so different... Are you running on battery? Mine is powered via 65W adapter through UltraSeries 3 base. Mine is a 4286 CTO with i5-2520M (2.5 GHz). I am using UEFI instead of legacy BIOS.
I don't think it should make a difference, but just in case it does, here is more info on my laptop: extra DIMM (3rd party) installed bringing RAM to 8 GB. BIOS 1.20. mSATA SSD (MyDigitalSSD 64 GB) is startup disk, but ProgramData and Users are on 320 GB drive. Both drives use BitLocker drive encryption (via TPM). The system takes a long time to post (at power on and with reboot) due to Lenovo's problems in the firmware. OS is Win 7 x64 Ultimate. The X220 lid is closed. The laptop is connected to a 1920x1200 display via DisplayPort-DVI adapter
After the computer rebooted I waited a few minutes for Windows services to settle down before starting the WEI assessments.

Intel graphics (945GM) and Kwin compositing not working.

I've done upgrade few months ago, and ever since then kwin compositing simply refuses to work. I'm currently running Xorg 1.8.1.902, have tried almost everything i could find on this forum (even wen't and rebuiild everything from scratch), but problem still persists.
I'm currently running Xorg without config.
glxconfig
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_INTEL_swap_event
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
GLX version: 1.4
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 945GME GEM 20100328 2010Q1 x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 7.8.2
OpenGL extensions:
GL_ARB_copy_buffer, GL_ARB_depth_texture, GL_ARB_draw_buffers,
GL_ARB_draw_elements_base_vertex, GL_ARB_fragment_program,
GL_ARB_half_float_pixel, GL_ARB_map_buffer_range, GL_ARB_multisample,
GL_ARB_multitexture, GL_ARB_pixel_buffer_object, GL_ARB_point_parameters,
GL_ARB_point_sprite, GL_ARB_provoking_vertex, GL_ARB_shader_objects,
GL_ARB_shading_language_100, GL_ARB_shading_language_120, GL_ARB_shadow,
GL_ARB_sync, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_array_object,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array, GL_EXT_copy_texture,
GL_EXT_draw_range_elements, GL_EXT_framebuffer_blit,
GL_EXT_framebuffer_object, GL_EXT_fog_coord,
GL_EXT_gpu_program_parameters, GL_EXT_multi_draw_arrays,
GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels,
GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_provoking_vertex, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle,
GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1,
GL_APPLE_client_storage, GL_APPLE_packed_pixels,
GL_APPLE_vertex_array_object, GL_APPLE_object_purgeable,
GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3,
GL_ATI_separate_stencil, GL_IBM_multimode_draw_arrays,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
GL_NV_packed_depth_stencil, GL_NV_texture_env_combine4,
GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_OES_read_format, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
32 GLX Visuals
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8e 24 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x8f 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x90 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x91 24 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x92 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x93 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x94 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x95 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x96 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x97 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x98 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x99 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x9a 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x9b 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x9c 24 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9d 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9e 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9f 24 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa0 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa1 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa2 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa3 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa4 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa5 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa6 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa7 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa8 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0xa9 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xaa 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x5d 32 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
48 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x5e 0 tc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x5f 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x60 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x61 0 tc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x62 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x63 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x64 0 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x65 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x66 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x67 0 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x68 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x69 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x6a 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6b 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6c 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6d 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6e 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6f 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x70 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x71 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x72 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x73 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x74 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x75 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x76 0 dc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x77 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x78 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x79 0 dc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7a 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7b 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7c 0 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7d 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7e 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7f 0 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x80 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x81 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x82 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x83 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x84 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x85 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x86 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x87 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x88 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x89 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x8a 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x8b 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x8c 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8d 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
And xorg log
[ 22.410] X Protocol Version 11, Revision 0
[ 22.410] Build Operating System: Linux 2.6.34-ARCH i686
[ 22.410] Current Operating System: Linux lappy 2.6.34-ARCH #1 SMP PREEMPT Mon Aug 2 20:51:48 UTC 2010 i686
[ 22.410] Kernel command line: root=/dev/disk/by-uuid/ff8aedc5-5364-44a8-94d9-ecf230e30b00 ro
[ 22.410] Build Date: 21 June 2010 11:54:27AM
[ 22.410]
[ 22.445] Current version of pixman: 0.18.2
[ 22.445] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.445] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.446] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 16:35:11 2010
[ 22.613] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 22.720] (==) No Layout section. Using the first Screen section.
[ 22.720] (==) No screen section available. Using defaults.
[ 22.720] (**) |-->Screen "Default Screen Section" (0)
[ 22.720] (**) | |-->Monitor "<default monitor>"
[ 22.721] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 22.721] (==) Automatically adding devices
[ 22.721] (==) Automatically enabling devices
[ 22.857] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 22.857] Entry deleted from font path.
[ 22.890] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 22.890] Entry deleted from font path.
[ 22.890] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 22.890] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/
[ 22.890] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 22.890] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 22.891] (II) Loader magic: 0x81e9d00
[ 22.891] (II) Module ABI versions:
[ 22.891] X.Org ANSI C Emulation: 0.4
[ 22.891] X.Org Video Driver: 7.0
[ 22.891] X.Org XInput driver : 9.0
[ 22.891] X.Org Server Extension : 3.0
[ 22.921] (--) PCI:*(0:0:2:0) 8086:27ae:1043:8340 Intel Corporation Mobile 945GME Express Integrated Graphics Controller rev 3, Mem @ 0xf7e00000/524288, 0xd0000000/268435456, 0xf7dc0000/262144, I/O @ 0x0000dc00/8
[ 22.921] (--) PCI: (0:0:2:1) 8086:27a6:1043:8340 Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xf7e80000/524288
[ 22.922] (II) Open ACPI successful (/var/run/acpid.socket)
[ 22.922] (II) LoadModule: "extmod"
[ 23.101] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 23.133] (II) Module extmod: vendor="X.Org Foundation"
[ 23.133] compiled for 1.8.1.902, module version = 1.0.0
[ 23.133] Module class: X.Org Server Extension
[ 23.133] ABI class: X.Org Server Extension, version 3.0
[ 23.133] (II) Loading extension MIT-SCREEN-SAVER
[ 23.133] (II) Loading extension XFree86-VidModeExtension
[ 23.133] (II) Loading extension XFree86-DGA
[ 23.137] (II) Loading extension DPMS
[ 23.137] (II) Loading extension XVideo
[ 23.137] (II) Loading extension XVideo-MotionCompensation
[ 23.137] (II) Loading extension X-Resource
[ 23.137] (II) LoadModule: "dbe"
[ 23.138] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 23.147] (II) Module dbe: vendor="X.Org Foundation"
[ 23.147] compiled for 1.8.1.902, module version = 1.0.0
[ 23.147] Module class: X.Org Server Extension
[ 23.147] ABI class: X.Org Server Extension, version 3.0
[ 23.147] (II) Loading extension DOUBLE-BUFFER
[ 23.147] (II) LoadModule: "glx"
[ 23.148] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.176] (II) Module glx: vendor="X.Org Foundation"
[ 23.176] compiled for 1.8.1.902, module version = 1.0.0
[ 23.176] ABI class: X.Org Server Extension, version 3.0
[ 23.177] (==) AIGLX enabled
[ 23.177] (II) Loading extension GLX
[ 23.177] (II) LoadModule: "record"
[ 23.178] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 23.179] (II) Module record: vendor="X.Org Foundation"
[ 23.179] compiled for 1.8.1.902, module version = 1.13.0
[ 23.179] Module class: X.Org Server Extension
[ 23.179] ABI class: X.Org Server Extension, version 3.0
[ 23.179] (II) Loading extension RECORD
[ 23.179] (II) LoadModule: "dri"
[ 23.180] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 23.251] (II) Module dri: vendor="X.Org Foundation"
[ 23.251] compiled for 1.8.1.902, module version = 1.0.0
[ 23.251] ABI class: X.Org Server Extension, version 3.0
[ 23.251] (II) Loading extension XFree86-DRI
[ 23.251] (II) LoadModule: "dri2"
[ 23.252] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 23.271] (II) Module dri2: vendor="X.Org Foundation"
[ 23.271] compiled for 1.8.1.902, module version = 1.2.0
[ 23.271] ABI class: X.Org Server Extension, version 3.0
[ 23.271] (II) Loading extension DRI2
[ 23.271] (==) Matched intel as autoconfigured driver 0
[ 23.271] (==) Matched vesa as autoconfigured driver 1
[ 23.271] (==) Matched fbdev as autoconfigured driver 2
[ 23.271] (==) Assigned the driver to the xf86ConfigLayout
[ 23.271] (II) LoadModule: "intel"
[ 23.271] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.374] (II) Module intel: vendor="X.Org Foundation"
[ 23.374] compiled for 1.8.1.902, module version = 2.12.0
[ 23.374] Module class: X.Org Video Driver
[ 23.374] ABI class: X.Org Video Driver, version 7.0
[ 23.375] (II) LoadModule: "vesa"
[ 23.375] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.389] (II) Module vesa: vendor="X.Org Foundation"
[ 23.389] compiled for 1.8.0, module version = 2.3.0
[ 23.389] Module class: X.Org Video Driver
[ 23.390] ABI class: X.Org Video Driver, version 7.0
[ 23.390] (II) LoadModule: "fbdev"
[ 23.391] (WW) Warning, couldn't open module fbdev
[ 23.391] (II) UnloadModule: "fbdev"
[ 23.391] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 23.391] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 23.392] (II) VESA: driver for VESA chipsets: vesa
[ 23.392] (++) using VT number 7
[ 23.401] (II) Primary Device is: PCI 00@00:02:0
[ 23.401] (WW) Falling back to old probe method for vesa
[ 23.404] drmOpenDevice: node name is /dev/dri/card0
[ 23.404] drmOpenDevice: open result is 9, (OK)
[ 23.427] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 23.427] drmOpenDevice: node name is /dev/dri/card0
[ 23.427] drmOpenDevice: open result is 9, (OK)
[ 23.427] drmOpenByBusid: drmOpenMinor returns 9
[ 23.428] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 23.428] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 23.428] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 23.428] (==) intel(0): RGB weight 888
[ 23.428] (==) intel(0): Default visual is TrueColor
[ 23.428] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
[ 23.428] (--) intel(0): Chipset: "945GME"
[ 23.428] (==) intel(0): video overlay key set to 0x101fe
[ 23.454] (II) intel(0): Output VGA1 has no monitor section
[ 23.557] (II) intel(0): Output LVDS1 has no monitor section
[ 23.557] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 23.584] (II) intel(0): EDID for output VGA1
[ 23.687] (II) intel(0): EDID for output LVDS1
[ 23.687] (II) intel(0): Manufacturer: HSD Model: 3e9 Serial#: 172753
[ 23.687] (II) intel(0): Year: 2009 Week: 31
[ 23.687] (II) intel(0): EDID Version: 1.3
[ 23.687] (II) intel(0): Digital Display Input
[ 23.687] (II) intel(0): Max Image Size [cm]: horiz.: 22 vert.: 13
[ 23.687] (II) intel(0): Gamma: 2.20
[ 23.687] (II) intel(0): No DPMS capabilities specified
[ 23.687] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 23.687] (II) intel(0): First detailed timing is preferred mode
[ 23.687] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.317 greenY: 0.564
[ 23.688] (II) intel(0): blueX: 0.152 blueY: 0.131 whiteX: 0.310 whiteY: 0.330
[ 23.688] (II) intel(0): Manufacturer's mask: 0
[ 23.688] (II) intel(0): Supported detailed timing:
[ 23.688] (II) intel(0): clock: 45.0 MHz Image Size: 220 x 129 mm
[ 23.688] (II) intel(0): h_active: 1024 h_sync: 1077 h_sync_end 1112 h_blank_end 1200 h_border: 0
[ 23.688] (II) intel(0): v_active: 600 v_sync: 604 v_sync_end 609 v_blanking: 625 v_border: 0
[ 23.688] (II) intel(0): Supported detailed timing:
[ 23.688] (II) intel(0): clock: 51.4 MHz Image Size: 220 x 129 mm
[ 23.688] (II) intel(0): h_active: 1024 h_sync: 1117 h_sync_end 1152 h_blank_end 1240 h_border: 0
[ 23.688] (II) intel(0): v_active: 600 v_sync: 617 v_sync_end 622 v_blanking: 638 v_border: 0
[ 23.688] (II) intel(0):
[ 23.688] (II) intel(0):
[ 23.688] (II) intel(0): EDID (in hex):
[ 23.688] (II) intel(0): 00ffffffffffff002264e903d1a20200
[ 23.688] (II) intel(0): 1f13010380160d780a86269457519027
[ 23.688] (II) intel(0): 214f5400000001010101010101010101
[ 23.689] (II) intel(0): 010101010101941100b0405819203523
[ 23.689] (II) intel(0): 4500dc8100000019161400d840582620
[ 23.689] (II) intel(0): 5d231504dc8100000000000000fe0000
[ 23.689] (II) intel(0): 000000000000000000000000000000fe
[ 23.689] (II) intel(0): 00000000000000000001000000000045
[ 23.689] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 23.690] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 23.690] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 23.690] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 23.690] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 23.690] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 23.690] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 23.690] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 23.690] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 23.690] (II) intel(0): Printing probed modes for output LVDS1
[ 23.690] (II) intel(0): Modeline "1024x600"x60.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
[ 23.690] (II) intel(0): Modeline "1024x600"x65.0 51.42 1024 1117 1152 1240 600 601 606 638 -hsync -vsync (41.5 kHz)
[ 23.690] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 23.690] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 23.690] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 23.690] (II) intel(0): Output VGA1 disconnected
[ 23.690] (II) intel(0): Output LVDS1 connected
[ 23.691] (II) intel(0): Using exact sizes for initial modes
[ 23.691] (II) intel(0): Output LVDS1 using initial mode 1024x600
[ 23.691] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 23.691] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
[ 23.691] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
[ 23.691] (==) intel(0): DPI set to (96, 96)
[ 23.691] (II) Loading sub module "fb"
[ 23.691] (II) LoadModule: "fb"
[ 23.692] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.716] (II) Module fb: vendor="X.Org Foundation"
[ 23.717] compiled for 1.8.1.902, module version = 1.0.0
[ 23.717] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.717] (II) UnloadModule: "vesa"
[ 23.717] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.717] (==) Depth 24 pixmap format is 32 bpp
[ 23.717] (II) intel(0): [DRI2] Setup complete
[ 23.717] (II) intel(0): [DRI2] DRI driver: i915
[ 23.717] (**) intel(0): Tiling enabled
[ 23.717] (**) intel(0): SwapBuffers wait enabled
[ 23.717] (==) intel(0): VideoRam: 262144 KB
[ 23.717] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096, tiled
[ 23.735] (II) UXA(0): Driver registered support for the following operations:
[ 23.735] (II) solid
[ 23.735] (II) copy
[ 23.735] (II) composite (RENDER acceleration)
[ 23.735] (II) put_image
[ 23.735] (II) get_image
[ 23.746] (==) intel(0): Backing store disabled
[ 23.746] (==) intel(0): Silken mouse enabled
[ 23.746] (II) intel(0): Initializing HW Cursor
[ 23.776] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 23.799] (==) intel(0): DPMS enabled
[ 23.799] (==) intel(0): Intel XvMC decoder disabled
[ 23.800] (II) intel(0): Set up textured video
[ 23.800] (II) intel(0): Set up overlay video
[ 23.800] (II) intel(0): direct rendering: DRI2 Enabled
[ 23.800] (--) RandR disabled
[ 23.800] (II) Initializing built-in extension Generic Event Extension
[ 23.800] (II) Initializing built-in extension SHAPE
[ 23.800] (II) Initializing built-in extension MIT-SHM
[ 23.800] (II) Initializing built-in extension XInputExtension
[ 23.800] (II) Initializing built-in extension XTEST
[ 23.800] (II) Initializing built-in extension BIG-REQUESTS
[ 23.800] (II) Initializing built-in extension SYNC
[ 23.800] (II) Initializing built-in extension XKEYBOARD
[ 23.800] (II) Initializing built-in extension XC-MISC
[ 23.800] (II) Initializing built-in extension SECURITY
[ 23.800] (II) Initializing built-in extension XINERAMA
[ 23.800] (II) Initializing built-in extension XFIXES
[ 23.800] (II) Initializing built-in extension RENDER
[ 23.800] (II) Initializing built-in extension RANDR
[ 23.801] (II) Initializing built-in extension COMPOSITE
[ 23.801] (II) Initializing built-in extension DAMAGE
[ 23.943] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 23.943] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 23.943] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 23.944] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 23.944] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 23.944] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[ 23.944] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 23.945] (II) intel(0): Setting screen physical size to 270 x 158
[ 25.218] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 25.218] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.218] (II) LoadModule: "evdev"
[ 25.219] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.247] (II) Module evdev: vendor="X.Org Foundation"
[ 25.247] compiled for 1.8.0, module version = 2.4.0
[ 25.247] Module class: X.Org XInput Driver
[ 25.247] ABI class: X.Org XInput driver, version 9.0
[ 25.247] (**) Power Button: always reports core events
[ 25.247] (**) Power Button: Device: "/dev/input/event5"
[ 25.254] (II) Power Button: Found keys
[ 25.254] (II) Power Button: Configuring as keyboard
[ 25.254] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 25.254] (**) Option "xkb_rules" "evdev"
[ 25.254] (**) Option "xkb_model" "evdev"
[ 25.254] (**) Option "xkb_layout" "us"
[ 25.372] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 25.372] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 25.372] (**) Video Bus: always reports core events
[ 25.372] (**) Video Bus: Device: "/dev/input/event6"
[ 25.381] (II) Video Bus: Found keys
[ 25.381] (II) Video Bus: Configuring as keyboard
[ 25.381] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 25.381] (**) Option "xkb_rules" "evdev"
[ 25.381] (**) Option "xkb_model" "evdev"
[ 25.381] (**) Option "xkb_layout" "us"
[ 25.385] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 25.386] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.386] (**) Power Button: always reports core events
[ 25.386] (**) Power Button: Device: "/dev/input/event4"
[ 25.397] (II) Power Button: Found keys
[ 25.397] (II) Power Button: Configuring as keyboard
[ 25.397] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 25.397] (**) Option "xkb_rules" "evdev"
[ 25.398] (**) Option "xkb_model" "evdev"
[ 25.398] (**) Option "xkb_layout" "us"
[ 25.399] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 25.399] (II) No input driver/identifier specified (ignoring)
[ 25.400] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 25.400] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 25.400] (**) Sleep Button: always reports core events
[ 25.400] (**) Sleep Button: Device: "/dev/input/event3"
[ 25.404] (II) Sleep Button: Found keys
[ 25.404] (II) Sleep Button: Configuring as keyboard
[ 25.404] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 25.404] (**) Option "xkb_rules" "evdev"
[ 25.404] (**) Option "xkb_model" "evdev"
[ 25.404] (**) Option "xkb_layout" "us"
[ 25.408] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 25.408] (II) No input driver/identifier specified (ignoring)
[ 25.419] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event8)
[ 25.419] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 25.419] (**) USB 2.0 Camera: always reports core events
[ 25.419] (**) USB 2.0 Camera: Device: "/dev/input/event8"
[ 25.434] (II) USB 2.0 Camera: Found keys
[ 25.434] (II) USB 2.0 Camera: Configuring as keyboard
[ 25.434] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD)
[ 25.434] (**) Option "xkb_rules" "evdev"
[ 25.434] (**) Option "xkb_model" "evdev"
[ 25.434] (**) Option "xkb_layout" "us"
[ 25.452] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[ 25.452] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 25.452] (**) Eee PC WMI hotkeys: always reports core events
[ 25.453] (**) Eee PC WMI hotkeys: Device: "/dev/input/event7"
[ 25.463] (II) Eee PC WMI hotkeys: Found keys
[ 25.463] (II) Eee PC WMI hotkeys: Configuring as keyboard
[ 25.463] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD)
[ 25.463] (**) Option "xkb_rules" "evdev"
[ 25.463] (**) Option "xkb_model" "evdev"
[ 25.464] (**) Option "xkb_layout" "us"
[ 25.465] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 25.465] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 25.465] (**) AT Translated Set 2 keyboard: always reports core events
[ 25.466] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 25.478] (II) AT Translated Set 2 keyboard: Found keys
[ 25.478] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 25.478] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 25.478] (**) Option "xkb_rules" "evdev"
[ 25.478] (**) Option "xkb_model" "evdev"
[ 25.478] (**) Option "xkb_layout" "us"
[ 25.479] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 25.479] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 25.479] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 25.479] (II) LoadModule: "synaptics"
[ 25.480] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 25.661] (II) Module synaptics: vendor="X.Org Foundation"
[ 25.661] compiled for 1.8.0.902, module version = 1.2.2
[ 25.661] Module class: X.Org XInput Driver
[ 25.661] ABI class: X.Org XInput driver, version 9.0
[ 25.661] (II) Synaptics touchpad driver version 1.2.2
[ 25.661] (**) Option "Device" "/dev/input/event9"
[ 25.710] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 25.710] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 25.710] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 25.710] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 25.710] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[ 25.710] (**) Option "TapButton1" "1"
[ 25.710] (**) Option "TapButton2" "2"
[ 25.710] (**) Option "TapButton3" "3"
[ 25.746] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 25.746] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 25.770] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 25.770] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 25.770] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 25.770] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 25.770] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 25.803] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 25.804] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 25.804] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 25.804] (II) Synaptics touchpad driver version 1.2.2
[ 26.303] SynPS/2 Synaptics TouchPad no synaptics event device found
[ 26.303] (**) Option "Device" "/dev/input/mouse0"
[ 26.316] (**) Option "TapButton1" "1"
[ 26.317] (**) Option "TapButton2" "2"
[ 26.317] (**) Option "TapButton3" "3"
[ 26.337] Query no Synaptics: 6003C8
[ 26.337] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[ 26.337] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[ 26.376] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
[ 26.376] (II) UnloadModule: "synaptics"
[ 26.377] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 26.377] (II) No input driver/identifier specified (ignoring)
## HERE IS WHEN I TRY TO ENABEL COMPOSITING ##
[ 44.523] (II) intel(0): EDID vendor "HSD", prod id 1001
[ 44.523] (II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
[ 44.523] (II) intel(0): Printing DDC gathered Modelines:
[ 44.523] (II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
[ 44.523] (II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
[ 62.938] (II) intel(0): EDID vendor "HSD", prod id 1001
[ 62.938] (II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
[ 62.938] (II) intel(0): Printing DDC gathered Modelines:
[ 62.938] (II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
[ 62.938] (II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
[ 64.643] (II) intel(0): EDID vendor "HSD", prod id 1001
[ 64.643] (II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
[ 64.643] (II) intel(0): Printing DDC gathered Modelines:
[ 64.643] (II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
[ 64.643] (II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
[ 65.290] (II) intel(0): EDID vendor "HSD", prod id 1001
[ 65.290] (II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
[ 65.290] (II) intel(0): Printing DDC gathered Modelines:
[ 65.290] (II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
[ 65.290] (II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
Anyone have some advices on how to solve it, or maybe just some pointers where the problem could lie? I'm starting to run out of ideas.
EDIT: Sorry if there is already another identical thread posted somwhere, i couldn't find it.
Last edited by n00bz (2010-08-06 14:16:48)

Vamp898 wrote:
try this
rm .kde4/share/config/kwinrc
That solved it!!! Thank you!!!

Linux 3.11 breaks triple monitor support on intel graphics

I just ran pacman -Syu, observed linux (3.10.10-1 -> 3.11.1-1), and found that I can no longer use more than 2 monitors simultaneously. When I try to configure 3 or 4 monitors with xrandr or arandr, I get an error message like "xrandr: configure crtc 2 failed".
When I boot with linux-lts 3.10.12, it works reliably again.
I have Intel HD Graphics 4000 on a i5-3320M CPU for a Thinkpad T530 with a ThinkPad Mini Dock Series 3.
I have 4 monitors: internal laptop screen, DVI, DisplayPort, and a USB DisplayLink. With linux 3.10, all 4 can work simultaneously. With linux 3.11, any 2 of them can work simultaneously.
In my journalctl at boot time, I see
kernel: fbcon: inteldrmfb (fb1) is primary device
kernel: fbcon: Remapping primary device, fb1, to tty 1-63
kernel: e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
kernel: IPv6: ADDRCONF(NETDEV_UP): ethernet0: link is not ready
kernel: iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
kernel: iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
kernel: psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 920262
kernel: psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
kernel: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input18
kernel: iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
kernel: iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
kernel: IPv6: ADDRCONF(NETDEV_UP): wifi0: link is not ready
kernel: con2fb_init_display: detected unhandled fb_set_par error, error code -22
kernel: [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp on
kernel: wifi0: authenticate with .........
kernel: .ready
kernel: sd 7:0:0:0: [sdd] .........
kernel: released /dev/fb0 user=0 count=0
kernel: con2fb_release_oldinfo: detected unhandled fb_set_par error, error code -22
kernel: i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
Yesterday when I was running linux 3.10, I saw this in my journalctl at boot time with no errors:
kernel: fbcon: inteldrmfb (fb1) is primary device
kernel: fbcon: Remapping primary device, fb1, to tty 1-63
kernel: e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
kernel: e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
kernel: IPv6: ADDRCONF(NETDEV_UP): ethernet0: link is not ready
kernel: iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
kernel: iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
kernel: psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 920262
kernel: psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
kernel: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input18
kernel: iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
kernel: iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
kernel: IPv6: ADDRCONF(NETDEV_UP): wifi0: link is not ready
kernel: wifi0: authenticate with .............
kernel: released /dev/fb0 user=0 count=0
kernel: i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
My symptoms seem similar to Unable to configure 3 display multihead / X fails to start with 3 displays connected, although that was reported on linux 3.4.

Googling around, I found a few more people with what looks like the same problem commenting at the bottom of wrpll sharing not implemented (3x HDMI/DVI screens).
I have Intel graphics card and it supports triple head setup very well. ... I updated kernel to 3.11.1 after it appeared in Archlinux's repo and one of screens stopped working. I tried to fix it with xrandr but I got only "xrandr: Configure crtc failed" errors and these in Xorg.0.log:
I have a similar setup and am experiencing the same thing. Downgrading to 3.10 fixed the issue. I'm also happy to help fix this.
But apparently it's not the correct bug since someone said "if triple display worked and regressed in recent kernels then you have a different bug."
I think I should report this somewhere, but I'm not sure I understand exactly where (linux or xorg or arch?)

T520 with Optimus - Can't install Intel Graphics Driver in XP

Hello,
I have T520 with Optimus FHD screen.
I have XP installed in my Ultrabay HDD.
I understand that XP doesn't support Optimus and that I must go to BIOS and choose either Discrete or Integrated.
OPTION 1 (Discrete Only) Which someone what works:
- So, when I have Discrete enabled in BIOS - and installed Nvidia Drivers in XP - everything works fine, expcept on 90% initial boot ups after going from Win 7 to XP (F12 Options) - I assume the NVIDIA driver doesn't get initially recognised and the XP boots up in non native resolution.
- It's only after I restart again and use (F12 again) to pick Ultrabay with XP, the Nvidia gets properly loaded. But this time, there is a prolong delay (60 to 90 seconds) of black screen after the WIndows XP Welcome screen before the desktop appears.
OPTION 2 (Intgrated Display Only) - Of couse, this after uninstalling NVIDIA Graphic Driver in XP
- In BIOS, Integrated Graphic in choosen.
- XP boots up in basic resolution.
- I download (From Lenovo T520 Driver Page) - Intel Integrated Driver for Win XP 32.
- When I try to install it, it says "The computer doesn't meet the minimum requirements for installing the software"
- BTW, I do have all the WIndows Updates including NET 3.0 and higher
- So then, I try to forcibly installed through Device Manager and Having DISK - but I get Error message.
- But somehow, it works after.
One guess I have and that confuses me is the Otimus Graphic Card - where maybe it can only work with either Optimus Drivers in Windows 7 or Nvidia Drivers in Windows XP. And that the Integrated Intel HD Graphic Drivers in for XP on Lenovo website are only meant for T520 with Intel Graphics ??!!
Or can optimus be used with intergrated intel drivers only in the XP?
If anyone can shed a small light, I would be grateful.
Thanks You
Solved!
Go to Solution.

Glad to know everything is working for you.
You shouldn't need the discrete to watch flash videos, the Intel integrated should be able to handle that on its own.
The nVidia card shouldn't be running at all when the machine is in integrated . In fact it doesn't even run in Optimus except when it is actively being used. nVidia proved this when it was first demoing the technology. nVidia removed the nVidia chip from the motherboard of an active system that was running in Optimus using only the integrated graphics, and the computer kept running without issue and the power consumption was the same with and without the chip on the board.
If you really wanted FireFox to always run with the nVidia card (again, I don't know why you would want this) you can change the settings in the nVidia control panel to force FireFox to run with discrete.
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

DVD player only shows video under Intel graphics

I have a Macbook Pro 15", i7 2.66, and just noticed that Apple's DVD Player app will only show video under Intel graphics. When it's switched to the Nvidia 330M, all I get is a black screen (+ audio).
Oddly, the VLC app works fine, so I'm (sort of) hoping this is a software issue. Anyone else experience this?

Agreed it is a shame. This is the second time to hear of this glitch. I do not know if it constitutes a bug however.
If you want to report it to Apple's engineers, send a bug report via its Bug Reporter system. To do this, join the Mac Developer Program—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report. The nice thing with this procedure is that you get a response and a follow-up number thus starting a dialog with engineering.
Message was edited by: leroydouglas

Intel graphics 30 bpp support?

Hi, I am looking into a new monitor and have been searching the web for a while on specs for the Intel Graphics 6000 (on my NUC i5). However I can't find any information on the bit per pixel it supports. The manual for my NUC only says the displayport supports 30 bpp and the hdmi port only support 24 bpp, nothing directly concerning the graphics card. Is it only a driver issue or am I missing something here?
Christian

And what is the relevance? Do you actually have a monitor that could benefit from the extended 30bit color range? I'm afraid you are asking the wrong question. That said, it is doubtful that the limited power of any intel graphics could support 30bpc and at the same time keep all required accelerated features in PS running...
Mylenium

Is Flash CS4 not compatible with Intel Graphics (laptop)? Really?

Hi!
I'm graphic and animation designer. My company buys CS4 suite
including Photoshop & Flash. And I'm buying a laptop and now
choosing between one having Intel Graphics and another with ATI
Radeon. Intel has some features I need, but after googling, finding
and reading this topic:
http://www.adobeforums.com/webx?14@@.59b6c473/0
till the end, I see it does not fully support Photoshop
CS4!!! I also need Flash CS4 working, so does it support Flash?
So can you still recommend me buying intel integrated-laptop
or should I take an ATI Radeon powered one? I need Flash working
without annoying compatibilites problems. I don't want to buy an
Intel one, if it is not Photoshop- and Flash- compatible....
Thank you!

Anne,
> after googling, finding and reading this topic:
>
http://www.adobeforums.com/webx?14@@.59b6c473/0
> till the end, I see it [an Intel chip] does not fully
support
> Photoshop CS4!!! I also need Flash CS4 working, so does
> it support Flash?
It's important you understand what "fully support" means in
this
context. According to Eric Palmer's Dec 4 reply (12:11pm),
Photoshop CS4
does, in fact, run reliably on systems with Intel graphics.
Eric purports
to be an Intel employee, but obviously there's no proof of
that.
Regardless, his assertion jibes with with I hear from
colleagues with Intel
graphics chips.
It's not as if Photoshop suddenly fails if you happen to
choose, say,
red from the color swatches. It's not as if Photoshop fails
to export GIFs
on Intel machines. The only thing you're missing -- and this
is true for me
too, even though I don't have Intel equipment -- is
functionality that
relies on OpenGL. One of these features, for example, lets
you rotate the
canvas while you work on a file. I don't mean rotate the
image itself ... I
mean rotate the actual work space without resampling the
image, just as if
you were rotating the piece of paper on which you were
drawing. Granted,
that sounds like a neat feature (I'd like to experiment with
it, myself!),
but it's not a deal-breaker.
As far as I've seen, the Flash CS4 authoring tool doesn't
rely on any
OpenGL-accelerated features.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

Intel Graphics chip question

I've got a MBP with the i7 Processor. 15" model. I also got the upgraded 1680x1050 screen too.
Just tonight, when I turned on my machine it powered up normally, flashed the desktop and then went to a fuzzy/snowy screen. Kinda like snow on an old television set that's not getting a signal but with no movement or flickering. I get the pointer but that's it.
When I restart the machine connected to an external monitor via mini display port, all's fine. When I unplug the external screen it goes back to the same screen issue.
When I restart with external monitor, then turn off the auto graphics switching option in the energy saver system preference panel, all's fine, I can unplug the monitor and use my MBP screen. I can use it with the built in nVidia chip, but not the intel. Any one else have troubles with this?
I just updated the system with the latest software update which had a graphics thing in it, but that did not solve the problem. It seems that my intel graphics chip is dead. Any help or guidance is much appreciated.
Brent

It is a new Macbook Pro 15" i7. I did a complete reinstall and unfortunately my Time Machine Back up does not have before I installed Air Display. Still does it. Even with the new update.
Also reinstalled Air Display just to try and uninstall it - no luck
Also tried PRAM reset it stays on a blue screen after start up (Apple with spinning wheel).
Still works with Nvida but the moment I switch to Dynamic it goes to that screen. I did a reinstall with out my applications from Time Machine...Intel works. Of course I have to rebuild everything.

T500 Intel Graphics Anomalies with a side of BlueTooth

Greetings,
I have my system configured to use the Intel Integrated graphics (set to internal in the bios to save power) and I am experiencing the following graphical problems. I am running the latest bios and display driver from Lenovo, as provided by ThinkVantage System Update. Details of the drivers are in the directx diagnostics below. I have tried to install the latest Intel graphics driver from Intel's website for this chipset, but it says that my system is not supported (possibly something to do with ATI's Hybrid Graphics).
This does not occur in OpenSUSE 11.2 (even with the 3D Gnome desktop), but it does in Windows x64 with Aero. It usually occurs after watching SlingBox or NetFlix Instant View, but it has occurred in the past without those activities.
It has not occurred when using the ATI graphics adapter (set to dedicated in the bios), at least from the limited amount that I have made use of it.
Model: 20828zu
DirectX Diagnostics (full system / driver specs):
http://home.comcast.net/~quako33/MISC/DxDiag.txt
Screenshots of the problem:
http://home.comcast.net/~quako33/Images/gpu_problem1.png
http://home.comcast.net/~quako33/Images/gpu_problem3.png
Any ideas on how to resolve this without having to switch over to the ATI graphics adapter will be appreciated.
Finally... the bluetooth question... any keystroke to disable only the bluetooth? When I hit fn+f5, it disables the wifi and the bluetooth. A way to disable it in OpenSUSE 11.2 Gnome (like I can in Windows) would accomplish the same goal.
Thanks
Solved!
Go to Solution.

It's a bug in the drivers. If you have 2+1GB or 2+4GB of RAM memory this will occur. Did you try to disable Aero? It might help. From what I understand the only way to fix this issue is to buy another 2GB module (2+2GB), or wait until a new graphics driver is released.
Regarding the Bluetooth;
Make sure you have Lenovo Hotkey Installed (If you have ran Lenovo System Update you probably have this installed).
Navigate to "C:\Program Files\Lenovo\HOTKEY" and open "TpFnF5.exe" and hit the "Settings for Fn + F5" button.
I must admit I didn't really get if you had the Fn + F5 issues in Windows or OpenSUSE, but the behavior for Fn + F5 under Ubuntu 9.10 is:
WLAN/BT/OFF toggle (Fn+F5 press once: Wlan and BT off/Press second time: BT off, Wlan on/Third time: BT on, Wlan off/Press another time: BT and Wlan on)
If that is of any help to you.

How to open and validate the tif images via java?

Is it possible to open and validating the photoshop images via java. Kindly advise me.
Thanks for looking into this.
Maria Prabudass

I have recently looked at athe code for Image Processor.
To avoid bailing on errors it uses two techniques.
1) It turns off all PS error reporting in addition to just turning off dialogs with: app.displayDialogs = DialogModes.NO; (it restores the original settings when exiting)
2) It uses the Javascript construct Try.....Catch around the basic body of the code so "any" error will not abort the script but just jump to the "Catch" code.
Hope that is useful

How can I disable intel graphics? G570

Hi!
I have a question like in the topic. I have a Lenovo G570 laptop with Intel HD integrated Graphics and AMD HD 6300M dedicated Graphics. I'm running on Win7.
I know that a similar topic was before and that the Intel graphic should switch to amd when necessary but I think it's not working right. The problem is with Skyrim. When I run the game's setup it automatically detects the configuration I possess and chooses the graphic options in the game. As You can imagine they are the lowest possible as it ONLY detects my intel graphic. The AMD adapter is not there (the list which appears to choose from does contain the intel only).
So, is there ANY way to just turn off the intel adapter and work on amd all the time? It would help a lot. I tried that in device manager but when I disable the intel graphics the screen resolution drops rapidly and aero theme from windows is being disabled. It sucks. As if I was forced to use the intel.
Can anyone help? I would sure appreciate that a lot.
Thanks!

Hi Lenssd9,
If you could tell us what machine type you're using and the operating system we might be able to pinpoint a means of assisting you without too much reconfiguring.
Be AWESOME Everyday!
Donate KUDOS and Click "Accepted Solution"
Did someone help you today?
Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

T420 w/ Intel graphics no image via displayport

Similar Messages

Maybe you are looking for