T61 - unable to view network status & tasks

I have problem opening network and sharing center even though i have ntwork connectivity via NIC/WiFi. Also unable to open desktop personalize properties. When I try to do these window opens and disappears immediately. Let me know how to resolve this...

I'd try logging on as another (or new) user to check for profile corruption.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

  • Any unix commands to view network status & activity using the terminal?

    I don't use the terminal much and was wondering if there are any unix network commands that let you view packet contents, connection status and other network information. I'm not interested in making any changes, I just want to use the terminal to get network and related information.
    Thanks in advance to anybody who answers.
    - Mark
    G4/450MHz Sawtooth   Mac OS X (10.4.7)  

    Hi Mark,
       There are tons of commands; it would help to know what you want to know. You can monitor the status of all ports with:
    sudo lsof +Mi
    That will display all network connections and all listening daemons. A command that is similar to that is:
    netstat -a -f inet
    Of course netstat specializes in network information and there are lots of different stats it will display.
       If you run a firewall, it keeps stats on rule matches. You can see them with:
    sudo ipfw -atdN list
       As has already been mentioned, Mac OS X comes with tcpdump but there's only one great packet sniffer: Ethereal. It doesn't come with OS X but if you have X11, it can be installed with a packet manager like Fink.
       Finally, many running services keep their own stats or logs. You would have to read up on the ones you're running to see what information they provide.
    Gary
    ~~~~
       A diplomat is man who always remembers a woman's
       birthday but never her age.
             -- Robert Frost

  • WebDMS-Unable to view document status

    Hi,
    while creating new document in webdms no entries are visible under document status.
    while changing the document in webdms but created in DMS all the values in document status are visible.
    could anyone tell whether any setting is missing?
    Thank You,
    Manoj

    Hi Niranjan,
    Component Version is SAP ECC 6.0.
    Customizing is ok, the only problem is that when I am creating document directly in webDMS, no statuses are visible, but if am creating document in ECC and then changing in webDMS all the statuses are visible.
    one more thing..the link which we are using here to access webDMS in clients network, can the same be used through external network apart from clients network to access webDMS?
    Thank You,
    Manoj

  • Unable to view CSQ status on Agent desktop

    Hello,
    We are facing issue with CSQ status on CAD application. This is happening only for newly created CSQs.
    We have other CSQs which are working properly and users are able to see those while they are getting calls.
    Attached are the screen shots for the same.
    UCCX version: 7.0(1)SR05 -Premium
    CAD :7.1

    This issue has bee resolved.
    The information that is displayed on CSD/CAD is handle by the Cisco desktop Enterprise Service
    we have restarted Cisco desktop Enterprise Service.
    This service can be restarted at any time and It will not affect calls, agents, supervisors, etc.

  • Unable to view new tasks in the UWL

    Hi all,
    I am using EP 7.0 SP8 and backend R/3 4.6C. I  configured by Worklist and work items to my UWL with the backend .My Problem is I am unable to view the New OR  in Progress Tasks in the UWL but  i am able to view the completed tasks in the UWL.
    Is the Problem with the backend R/3 version or some thing else?
    Please help me..
    Thanks and Regards,
    Sateesh.

    Hi,
    Check whether the release rule you are running has the option Auto Allocate (Inventory Tab) is YES.
    If it has NO then you have to run the Move Order Pick slip program with auto allocate move orders as YES and order types as pick wave for material allocation to happen.
    once material is allocated you should be able to view them in WCB atleast.
    After you find them in WCB but not on telnet then check you resource and device setup.
    Karthik.

  • Unable to view website from within network - OSX Server

    I have recently set up a Mac mini server in my home. I have configured the DNS settings manually by creating a primary zone being my domain and then a machine record (A Record) in order to configure the right host name. I've checked this the usual way in terminal and it returns success.
    Before I go ahead and configure my mail, I noticed that I was unable to view my website. From within my network on any device.
    NB. My website is hosted externally with a third party.
    I have Mac Mini running Mavericks 10.9.1 and Server 3.0.2, I'm using a 2TB Time Capsule as the router which plugs directly into my fibre modem. Ports are opened correctly as I have done this through the Server App panel where I can see my Time Capsule.
    I've obtained the IP of the website and when I tried pinging it from terminal it cannot resolve. I've contacted Apple, and after 2 hours on the phone to them, I've been told it's out of the scope of their support.
    If this is DNS, can someone help, because I'm pulling my hair out!
    Thanks in advance.

    I have now figured this out!
    After setting up the hostname in the Server app I auto created the DNS records.
    I have removed them all, created a new zone, the zone being my domain name; I have then created a Machine (A) Record being my hostname; I have then created another ***BLANK*** Machine (A) Record being my domain, and hey presto, everything works perfectly.

  • Unable to view the NEW or In progress tasks in the Universal Worklist

    Hi all,
    I am using EP 7.0 SP8 and backend R/3 4.6C. I  configured by Worklist and work items to my UWL with the backend .My Problem is I am unable to view the New OR  in Progress Tasks in the UWL but  i am able to view the completed tasks in the UWL.
    Is the Problem with the backend R/3 version or some thing else?
    Please help me..
    Thanks and Regards,
    Sateesh.

    Seems to be lack of memory issue. Try to increase RAM of the development machine and try again.
    Nith

  • Unable to connect to internet although network status is ok

    Dear all,
    Since Monday (9 January 2005) I have been unable to access the internet using my usual web browsers (Safari, Internet Explorer and Firefox) and e-mail program (Mail) via Airport. This was despite Airport being active and the network status indicating that I was connected to the internet via Airport (green status). When plugging the iBook directly into my router, the network status naturally changed to being connected to the internet via Built-in Ethernet (I defined this order in the network port configurations). I was able to access the internet normally using my web browsers and e-mail program via Built-in Ethernet until this morning. Although the status of both Airport and Built-in Ethernet is still the same, my web browsers indicate that they can't find the respective servers.
    Your help would be very much appreciated.
    Best regards,
    Semilev
    iBook G4 14-inch   Mac OS X (10.3.9)   Airport Extreme Card 640 MB DDR SDRAM

    I have exactly the same problem. Internet provider (Time Warner) repaired a cable, installed a new splitter and a new modem. It worked for a day, then same problem. TWC tech verified cable, modem and router OK, problem in the computer. My work around is to disconnect the ethernet from the computer and operate it soley on WiFi. I hope to find out what is wrong with the iMac (running Lion), but for now it works fine this way.
    I had even restoree the OS, did not help.
    Go to the network preferences and make sure your network is selected, and it should work.
    Message was edited by: DocRon78

  • Unable to view list of added devices in LMS

    Dear All ,
         Iam working on Cisco LMS 3.2.1.Everything was working fine before but since last 2-3 days we are unable to view the list of added devices under device management tab.We are able to see the added groups only.Because of this issue we are unable to get the logs from the added devices.
    Can anybody help in resolving this issue.....???
    Regards ,
    Divya A M

    We tried the suggested steps and could successfully reset the Casuser Password.But couldnot perform unregistering and registering Apache service.We ended up getting the following errors.
    1.)
    C:\Documents and Settings\Administrator>pdreg -u Apache(no output)
    2.)
    E:\lms\MDC\Apache\bin>pdreg -r Apache -epdcmd: option requires an argument -- eERROR: no such command, or option error.Usage:    pdcmd options...Where -b msg    broadcast message to all daemons -k daemon    kill daemon -K    stop system -H    start system -l    list daemon registry -R daemon    start daemon -i daemon    show daemon status briefly -I    show all daemons status briefly -s daemon    show daemon status -S    show all daemons status -G    show daemon statistics -r daemon -e path -d depends -f arguments [-w ] [-n] [-q] [-t code]    register daemon (-w -- timeout for ready file notification)                    (-n -- no autostart)                    (-q -- no INFO messages)                    (-t {0|p|n} -- expected transient exit code                         where                            0 = expected exit code is 0                            p = expected exit code is >=0                            n = expected exit code is < 0 ) -u daemon [-q]    unregister daemon (-q -- no INFO messages) -v    show version number
    3.)
    E:\lms\MDC\Apache\bin>Apache.exe" -f "-d'Apache.exe" -f "-d' is not recognized as an internal or external command,operable program or batch file.
    4.)
    E:\lms\MDC>Apache -D SSL" -d TomcatMonitor(OS 10048)Only one usage of each socket address (protocol/network address/port)is normally permitted.  : make_sock: could not bind to address 0.0.0.0:443no listening sockets available, shutting downUnable to open logs
    Regards  ,
    Divya

  • WVC80N - Internet Gateway UPnP discovery failure message \ unable to view over the internet

    I have the WVC80N.  I recently got the new Comcast modem \ wifi but the Wifi is junk and had a lot of problems (loss connection, range etc) so I had Comcast "bridge" it so I just use my old wifi (LinkSys E1200).   I have TZO to handle remote viewing.  Everything was working great for about two weeks and we had a power outage.  Since then, I have been getting UPnP discovery message (in the status tab of the WVC80N camera site) and I am unable to view over the internet.  I get a 502 error usually but today I got extra info: "The socket connection to www.dfgehring.mylinksyscam.com failed.
    ErrorCode: 10060.  A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond."
    I had Comcast do a "repair / reset" transmission to the modem and still get the problem.
    I found these step on the forum:
      1. Home Wirless Rounter administration page, find the UnPn settings and Turn off UnPn and save it. Wait for atleast 30 sec  and go the same page and Turn it back on.
      2. On your wireless camera Adminstraion page, go to "Options" and find the UnPn if it is already disabled go ahead and "enable" it also "enable" the "Alternate web connection" and save it. If it was already enable please disable it save the settings and enable back on.
     The above 2 steps resolved my issue and I could able to view my camera from outside of my home network.
    Still no luck.  Tried it several times.
    Could the power outage reset something on the modem or router to change this? 
    Thanks
    Darren

    That's what I thought. The power outage may have set the modem, router or camera settings back to factory defaults causing it to loose connection. First thing first, call comcast and check if the modem is still on bridge mode. The modem may have been set back to a modem/router mode due to power outage.
    You may test if the remote access is properly set up in the network by going to http://ping.eu. In that site, you will see your internet ip address, take note of that. Click on port check, enter your internet ip address and the port number you used in the alternate web access port then click Go. If it says closed, there something wrong in the settings of either the router or camera. In that case, I suggest you reset the router and camera and then reconfigure them.
    I found these articles online which could help you reconfigure your router and camera settings:
    How to set up your router
    How to set up router wireless setting
    Connecting camera to wireless network
    How to set up remote access on linksys camera
    How to set up TZO on the linksys camera
    Hope these helps.

  • Can you view network drives in Bridge?

    I am currently using a trial of CS4 and when I go to bridge to select the files that I want to import into Lightrooom ( the one thing I don't understand about lightroom not having a browser to see the pictures before you import, I think this is crucial to good workflow ) I am unable to see any of my network, however my 1.4 version of Lightroom can see all the network. I am probably doing something wrong can anybody help?

    I hate to say this but you sound a bit distressed and aren't understanding me.  I specifically stated that in my scenario I am able to view network items such as computers on the network that are unmapped but are connected to the network.  I can go into those computers by twirling the triangle and viewing the shared folders.  within those folders I can view items that are part of that drive.  I can ALSO see mapped network drives and their contents.  I did experience a single problem of not being able to view two large folders on a network computer but it did not say "building criteria".  Usually "building criteria" only appears if you are "searching" for something.  You might try waiting for the criteria to finish building which could take some time in Bridge, since when it takes this step it is searching according to index and non-index criteria.  If it is non-index then it will be slow to respond to your search.  If Bridge doesn't work properly you might try to contact Adobe customer support if you purchased the product recently and it is under warranty and registered to you.  You cannot, as you said, open a file in CS4.  CS4 includes Bridge and a host of other applications based on what version of CS4 you have.  Please try to be more specific when you post as to the steps you took to reach your point of difficulty with the software.  Network in Bridge is located under the "Desktop" icon in Windows.  You have to twirl the Desktop in order to see the Network.

  • Unable to view data in the InfoCube as well as in the query

    Hi all,
    I have done the Init Load into an InfoCube 0Pur_c01. The Monitoring status is Green. I checked the Qm status which is green. There is data in the PSA.
    However, I am unable to view data in the InfoCube. Also when I execute the report I am receiving 'Application Data not found'error.
    It looks to be a strange sitaution.
    Please help me out
    Regards
    YJ

    Hi,
    I hope, some times the the unavailability of "PROCESSKEY" value for the records delivers like this.
    Refer the note: 353042
    And also refer the links:
    Re: Problem extracting 2LIS_03_BX into 0IC_C03
    Re: Records Not Added
    And also search this forum with "PROCESSKEY"
    With rgds,
    Anil Kumar Sharma .P

  • Lost ability to view the status of PDF conversion

    Greetings,
    I've been using CS5 for about a week after upgrading from CS4 on Windows 7. Everything was running fine until yesterday afternoon, when I suddenly lost the ability to view the status of the conversion of InDesign files to PDFs.
    Normally, when converting an InDesign file to a PDF using one of InDesign's PDF presets (Smallest File Size, High Quality Print, etc.) you see a status bar showing the status of the conversion within InDesign. Now when I convert an InDesign file to PDF, the PDF instantly appears in the save location without any status bars showing up in InDesign. The PDF is unopenable and the InDesign file is uncloseable until the conversion completes. In the end, there is no issue converting my files to PDF; however, it's a little annoying to convert a file and have to take a guess at when I can open it (some of my files can take quite some time to convert).
    At first, I thought it was a problem with my PC or installation. My supervisor has another license installed on his laptop, so we gave it a try on his. Same problem. I just think it's odd that the issue would appear out of nowhere on both installations.
    Any ideas of what might be going on?
    Thanks in advance for any replies.

    The Background Tasks pane does show what's going on (to a certain extent), but what I'm taking about should be showing by default. I jumped on our old Macbook and created a test file and converted it to PDF in our Mac version of CS4. See the status bar that shows in the image below. This is what I'm taking about. It's a window titled "Generating PDF." It's been in every version of InDesign I've had since the first CS.
    Shouldn't this be displaying?

  • "unable to get printer status" and "server-error-not-accepting-jobs"

    I've got an Intel Mac Pro with Tiger. When I accepted the latest update from Apple, I lost all my defined printers! I've re-added a local USB printer and a networked Laserjet - fine. But I also added a Phaser 850 color printer (networked) which used to work fine. It connects ok, and opens the printer queue window, but when it tries to print, it says "Unable to get printer status (server-error-not-accepting-jobs". The queue stays active (not stopped) but the jobs don't move. I've tried deleting the printer and re-making it - same deal. What's going on?
    Mike

    Hi Mike,
    One think I really dislike about OSX is the Rocket Science needed to just Print!
    Might try these two...
    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    Might try Printer Setup Repair 5.1...
    http://www.fixamac.net/software/index.html

  • Unable to view PDF files in Infoview

    I am unable to view pdf files in InfoView (Business Objects Edge Series XI 3.0)
    When I select the pdf file from Infoview, I receive the message 'Do you want to save this file' which only allows me to save the document to a location on my computer.
    Other users can view the file in Infoview, so it probably relates to a setting on my computer.
    Any ideas?
    Thanks

    I've had a little look on Adobe's knowledge base; try this to check whether the issue is related with opening PDF in your browser in general:
    "Determine if the web browser can open the PDF file from your local hard drive rather than from the web:
    In the web browser, choose File > Open (or Open File).
    Choose All Files from the Files Of Type pop-up menu (Windows)
    Click Browse
    Select the PDF file you saved in step 1 of task 5, and then click Open to open the PDF file. If Acrobat or Adobe Reader displays the file, but won't display it on the web, the web server has a problem serving the PDF file. Contact the webmaster of the site from which you downloaded the PDF file."
    If so, try the troubleshooting steps mentioned here:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=328233&sliceId=2

Maybe you are looking for