T6100 on SB live 5.1 digital

and here is my problem:Two days ago i've bought them and now only works sub, left and right speaker!!! and what about other speakers they don't work ((can smb help me to solve my problem if yes i'll be very grateful for him))p.s. i'think the problem is in my old sound card or some settings in windows if it so can you say me how to tune it in proper way)
Message Edited by woolk on 08-11-2007 10:57 PM

Your card is perhaps some of those OEM models (SB022-SB0229).
Maybe [url="http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=26737">th is [/url]trick helps you to install the update.
By following instructions from http://www.tech-pc.co.uk/audigy-2.php you (perhaps) be able to use the latest Audigy n drivers w/ your card (and install Audigy software too, link for CD can be found from [url="http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=25677">he re[/url]). In generally, patching is quite painless to do, if you just use "Automatic method" and follow the instructions carefully.

Similar Messages

5th media live with no digital output, and now pci slot is dead

you may recall my previous thread, where my 4th media live, still had no spif digital output. well i sent it back to ebuyer and got another one, and low and behold the same, only this one is noisyer and the pci slot seems to be dead!
i have tried a couple of devices in the riser card, and non of them seem to be recognised?
anyone got any ideas.
cheers
john

OK Status update:
I posted this question on the Dutch forum as well. I am happy to tell you all that in the Dutch forum Dragonfly is one of the moderators. He knows his MSI stuff
He gave me the solution to my problem. So just in case anyone else has a similar problem and can't read Dutch, here it is
He advised me to start the Media Live up with no monitor or TV attached to it at all. Then start up with either a monitor or a TV attached to it. Lo and behold.... the problem is solved.
All credits for this solution go to Dragonfly
Greetz,
J@n
PS Mark topic as SOLVED

My Sound Blaster Live 5.1 Digital won't work with Vista

First off, I wasn't sure whether to put this in the vista or Sound Blaster form so sorry if this is the wrong place.
Anyways. I got a new computer two days ago and just installed my old Sound Blaster li've 5. Digital (model SB0220) card into the new desktop. Vista, the operating system I'm using now tried to find the drivers but failed. Then I tried looking them up on the creative site with the drop down lists but it didn't pull up anything either.
I plan on buying an m-audio 2496 sound card soon but for now I would like to get back to recording and the Sound Blaster card is much better than the stock motherboard audio setup.
If anyone knows of any drivers for this card it would be extremely helpful.
ThanksMessage Edited by 85Dave on 07-0-200707:22 AM

hmm...thanks.
Well its not that bad really. sound blaster cards are not made for recording audio and so I was going to get the m-audio 2496 card anyways.
I'm just waiting for drivers on that which are supposed to come some time in the 2nd half of 2007.
Thanks for the info.

Two boards in one system (Onboard SoundMax + Live 5.1 digital), how

Hi All, i am trying to make a Sound Blaster Li've 5. digital coexist with a Onboard SoundMAX, but when i put the Li've 5. to work, it makes the system to ignote the presence of the SoundMAX, and the curious is that the Li've 5. reports itself as working correct, but there are no sound !!! Maybe someone could help -me!!? Thank?s in advance!!

hey how u solved ur conflict with onboard soundmax. is x-fi worth swaping my onboard?

Sb live 5.1 digital not found after reinstall of wi

hey,
im german so dont care for my english, and its new years eve :P
i have a problem: today i reinstalled winxp (installed no service packs or other things) and downloaded the newest driver for my sb li've 5. digital, but it says that no card can be found.
i read in the forum that a switch of the slot could help but it did not.
anyone who has an idea?
here some informations about my systemfrom aida32:
CPU Typ: AMD Athlon XP-A, 920 MHz (5.75 x 334) 2600+
Motherboard: Name: ASRock K7S8X (6 PCI, AGP, 3 DIMM, Audio, LAN)
Motherboard: Chipsatz: SiS 748
Soundkarte: Creative EMU0K SB Li've! Audio Processor (but the driver setup still says no card ^^)Message Edited by wave on 0-0-2006 06:50 PM

See if this CD hel
ps.
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=8432

PS2 - Live! DE + Digital I/O 2 + Computer = decode Dolby Pro Logic II?

Greetings,
I am a joiner of this forum but a long time user of Creative Sound Cards
since Creative Sound Blaser 2.0
I have a CT4760 + CT4770 and... a PS2.
I wonder if I can use a computer to decode Dolby Pro Logic II
from the signal of PS2 game via optical out to
Digital I/O 2 Optical In to computer to decode Pro Logic II
and output to some Creative 5.1 Speaker for example, DTT2500
or even Inspire 5700 (which doesn't decode Pro Logic II but DTS )
Any clue or solution from any experience user except buying DDTS-100
or some home theater solution with Optical In and Optical Input?

When the pro logic option is selected in the audio options, you should hear sound from the centre and rear speakers when playing just stereo sounds like music. I think Pro Logic is usually a hardware thing, but perhaps it can be implemented in software too. I think Creative should replace the CMSS button with a Pro Logic II button, as they do a similar thing. Although this would probably make the soundcards more expensi've due to the extra cost of including the Pro Logic II chips.
Actually, I have just read the post "How to enable sound for my center, rear and sides speakers?", it says CMSS works well with pro logic material, so you could try that with your games. Also, the Audigy 4 is compatible with DTS Neo: 6, which is DTS's answer to Dolby Pro Logic II. Having never used Neo: 6, I don't know how it would sound with Dolby PL2 games, or whether it would work at all, but it might be worth having a go .
Message Edited by pjc on 02-24-200506:33 PM
Message Edited by pjc on 02-24-2005 06:33 PM

Help on SB Live 5.1 & Digital I/O Mod

Hi
I've recently reinstalled my WinXP Pro Svc Pack 2 and is facing this problem with my SB Li've 5. and the Internal Digital I/O Module.
The Volume Control is detecting the Digital I/O module and have eg. Volume Control for the SPDIF In, when I'm using the WinXP Built-In SB Li've Series (WDM) Driver. But using this driver Creative Software like AudioHQ and Creative Mixer will not work. Creative Diagnostics fail and requie me to reinstall the drivers.
Installing the latest SB Li've Driver (Li'veDrvUni-Pack downloaded from Creative), AudioHQ and Creative Mixer does works, but the softwares are not detecting the Internal Digital I/O Module. The Volume Control column in does not reflects the SPDIF In (not hidden as well). AudioHQ also no longer reflects the Icon for the SPDIF Input.
Will be very greatful if someone can advise for a possible solution.
Regards,
Knite00

Your card is perhaps some of those OEM models (SB022-SB0229).
Maybe [url="http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=26737">th is [/url]trick helps you to install the update.
By following instructions from http://www.tech-pc.co.uk/audigy-2.php you (perhaps) be able to use the latest Audigy n drivers w/ your card (and install Audigy software too, link for CD can be found from [url="http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=25677">he re[/url]). In generally, patching is quite painless to do, if you just use "Automatic method" and follow the instructions carefully.

Help with sb0200 soundblaster live 5.1 digital.. only playing 2.1

At the risk of being redundant, I can not download a ligitamate driver for my SB0200 sound blaster li've 5. digital card... nowhere on this site.. I can not find my orginal disc, so I can not get the correct drivers... I also can not test my 5. speakers because I don't have the application that would come with thte driver disc... I am currently only playing out of 2.... no rear no center... is there any help for me ?

Did you remove your original soundcard and disable the drivers? If you don't do these things you can (and probably will) get conflict problems when you install the new soundcard, as most motherboards do not like more than one sound device attached to them.
In my case (a Compaq Presario PC) the advice from Compaq is to to delete the drivers, not just disable them. If you?delete,?make sure you can get hold of a fresh set of drivers for the original soundcard should you ever need to re-install it.Message Edited by monitor on 04-29-200705:0 PM

Creative Sound Blaster Live 5.1 Digital and Vi

Hi, I have Creative Sound Blaster Li've 5. Digital in my computer. I recently clean installed Windows Vista. Everything went fine, its been few months now everything was fine. But for the past few days my Vista computer is showing a blue screen on startup and will allow me to boot in Safe mode only with following error:
Download updates for Creative Sound Blaster Li've 5. Digital
?
This problem was caused by Creative Sound Blaster Li've 5. Digital,
which was created by Creative Technology Ltd.
Solution
To solve this problem, follow these steps:
Go online to the following website:
<img alt="[/img] src="http://wer.microsoft.com/Responses/include/images/arrow.gif">[color="#3a8e6">Creative Technology Ltd
<
Find SBL5DL_PCPatch_LB_3.exe, and then install it.
<
I downloaded above EXE file from creative web site and tried but it says File does not support Vista.
Can anyone please Help!!!
Idrees Adam

The front panel connections you want to use are adapted to be connected to a motherboard with audio included, NOT to a PCI audio card. You'll have to connect the front panel wires to your motherboard's audio connnector.
Greetings.
El At?n

SB live 5.1 digital (De

Currently, I have a pair of speakers at the PC and a splitter to send the same signal to another room to a receiver. All is well. Now, I just upgraded the receiver to digital. Is it possible to continue driving the PC speakers with analog output AND send digital output to the receiver?

I have the same soundcard and was pulling my hair out trying to get this to work >.< Turns out it's automatically set to "what u hear". Just go into play center, select the song you want to record, then when you have the EAX effect on, hit the record button. It plays through the song and saves it to a new file that has the effect on it.

SB Live 5.1 - Digital out does not wo

With the Sound Blaster Li've 5. that I have, I have never been able to get a digital signal to play. My first theory is that my A/V Recei'ver (Onkyo TXDS 747) from 998 can only handle a digital coax signal of 48kHz. Is it possible this receiver is too old to handle digital in? If that is the case, can I de-tune the sound card with some setting to an output that my receiver would accept?
Secondly, what is the proper adapter to use to go from the mini-jack to the full sized digital coax table? (The proper term may be SPDIF).
Thanks!

That's right, I have no sound at all out of the digital jack. Analog works fine. I did more digging and found the manual on this site and it says to you a mono mini-jack to RCA adapter. So I think I'm good with my connection. So there must be a software adjustment of some kind.
Any other long shots you can think of?
Thanks!

Live 5.1 Digital no installation

I have reinstalled win xp on my home pc. I cannot install my 5. digital without the original CD rom which I have lost. I keep getting a message stating there has to be a creative sound blaster sound card present. There is. I have looked on the forums for people with similar problems. The only solution seems to be install only with an original CD. Can anyone help. Where will i get a cd from?

Check the model number from a sticker on Li've! card board so you get the card properly identified (SB022x) --> BadBoy has some Li've! 5. CD's downloadable @ http://badboy.filefront.com/
jutapa

Driver for SB0226 SoundBlaster Live 5.1 Digital or SB0220? both on card

Serial Number MSB022640505343G
It says on the card it says model number SB0220 but serial number as given. Where can I get XP drivers? Thanks

Download Sound Blaster CD ISO?s:
http://hosted.filefront.com/BadBoyforum
Creative Li've! 5. Digital Drivers:
http://es.europe.creative.com/support/downloads/welcome.asp?bEOSLAgree=yes&action=next&sOSName=&re gion=3&MainCategory=266&Product_Name=Li've%2+5%2E+ Digital&Product_ID=853&modelnumber=
Message Edited by Rad-Wulf on 07-27-200709:28 PM

What is the deference between Live 5.1 and Live 5.1 Digita

What is the deference between SB Li've 5. and SB Li've 5. Digital?
Thanks

I'm not sure but I believe the digital and non digital drivers work for any of the two cards.
don't quote me on this one but I think the difference is one has a /8" digital output port and the non digital card does not.

Need full drivers for sb live 5.1 digital non-d

i lost my disc & cant install my sound card.

Just check the exact model number (SB022x) from a sticker w/ serial number and check on these pages - http://badboy.filefront.com/
jutapa

T6100 on SB live 5.1 digital

Similar Messages

Maybe you are looking for