T6100 with X-FI Titanium Fatal1ty Pro and Windows 7 x64

7T600 with X-FI Titanium Fatalty Pro and Windows 7 x64 Hello,
Please forgive me my bad laungage. Im writting this Post because i want to ensure i wont have any problem using configuration as i wrote in topic. So, are there any drivers for Windows 7 x64 (PL, Home Premium) for my sound card. Can i also use Creative Alchemy tool on Windows 7 x64. And do i need to use Alchemy on Windows 7, to gain EAX in games too? Can i also download and use PowerDVD with is deli'vered with the drivers? And what with Dolby Digital Li've? Is there a problem with activating and using it on Windows 7? And last question: Can i gain a 5. sound with my Creative Inspire T600 sound system and use it in game, and music listening?without any trouble?
I wish to apologize for that many?questions but this is very important to me. So can i use it all, and can i install it from my X-FI?Titanium?Install CD, or do i have to download it from Creative site?
Thank you very much for answer!
Thunderbolt (my real name is too hard for foreigners) ^^

Please refer to my reply on your post under Windows 7.

Similar Messages

Beta driver for Titanium Fatal1ty Pro and windows 7 64 bit

I see there are beta drivers on the website for the X-Fi Titanium Fatalty Pro on Windows 7 64 bit.
The drivers are dated June 23, 200.
Are there any known problems with this set of drivers?

Now I can't find those beta drivers on the website anymore.
Did support take them down?
And do the current drivers dated: july 30, 2009 cause the shutdown bug in win 7 64 bit's

Titanium Fatal1ty Pro and front panel audio

So I hooked up my case's front panel audio cable to the Titanium card and used the front panel connectors.
The sound quality is noticeably worse than using the back plugs. When I use the front panel mic, I also hear artifacts in the sound. When I play a game, I hear slight buzzes in accordance to what is coming out of the speakers.
I'm wondering if this is just the quality of my cases's cables or if it also happens with the official creative front panel accesory.
Anybody want to comment on quality?

/Re: Titanium Fatalty Pro and front panel audioQI had an older Audigy 2 dri've connected to my X-Fi Xtreme Music and that never had any interference. The X-Fi dri've bay can't be bought separately anymore.
When I switched to a newer X-Fi without a front panel, I used the case connectors and the sound quality was awful.
I think it's the way the connectors are wired and the build quality. Despite the really awful drivers Creative ship for their cards, the hardware's actually pretty good.
There're some guides on how to rewire front panel connectors to reduce noise:
http://www.head-fi.org/forum/thread/...ase-audio-jack?(rewire ground in case connector)
http://www.evga.com/forumsarchi've/tm.asp?m=00726856&mpage=&key=&#00726856?(shield front panel cable in insulating tape).

No MediaSource Go! with X-Fi Titanium Fatal1ty Pro Series?

I recently picked up a new X-Fi Titanium Fatalty Pro Series card; which replaced my older X-Fi Platinum, that sadly stopped working.
Anyway I noticed that, this newer Titanium card came with a newer version of the Creative MediaSource software; called MediaSource 5.
However, it does not include the launching application, MediaSource Go! which is the launcher bar that loads on startup. With my X-Fi Plat, when I hover my mouse over the top edge of my screen the MediaSource Go! launcher bar drops into view and I can just click on the icon of any Creative application that I have on that bar, to launch that application.
I liked that very much.
So I am curious, why is this not included with the newer MediaSource that comes with the X-Fi Titanium Fatalty Pro? I would very much love to have it!

@. Re: No MediaSource Go! with X-Fi Titanium Fatalty Pro Series? I have a similar issue. I am having a problem with speaker calibration which strated several months ago after updating some Creative files. Today I uninstalled all Creative apps and driver pack and reinstalled the latest versions. Doing this I lost my Mediasource Go! bar. So I downloaded it and when I tried to install it I got a message saying? I did not have the "minimum" version of MediaSource and that it would now quit. However, when I had Go! before I also had Mediasource5; in fact the Start Menu shortcut for Go! (which is now a broken link since Go was removed) showed it was in the Mediasource5 directory. So why won't Mediasource Go! install with Mediasource5 installed? I thought the "minimum" version of Mediasource required for Go! was 3.00.6.

SB X-Fi Xtremegamer Fatal1ty Pro and Windows 7 problem

6SB X-Fi Xtremegamer Fatalty Pro and Windows 7 problem7Hi,
I have SB X-Fi Xtremegamer Fatalty Pro? sound card on my pc and after updating on windows 7 Unltimate my card doesnt work... i tryed every posible driver according this issue and nothing happens.. i got 2 errors .) on Volume panel i have this messege " There are no supported audio device available. You need to close the application. Click OK to close the applcation now. " and on Computer manangement an error on Creative X-Fi audio Processor (WDM),?
I check the drivers and is SB0460?. on the site it say Xtreme music but the code is the same with my card.. i used this drivers and nothing. i also used auto update and nothing again..
Please any help because i dont know what to do any more..
My best regards

Did you try using an independent driver such as robertmc8's PAX driver or Daniel K.'s drivers? I have an old PCI-based Xtremegamer Fatalty Pro with Windows 7 64 bit and I am using PAX drivers. No problems here.

Poll: Who is having no sound issues with X-Fi Titanium Fatal1ty Pro?

Several weeks ago I purchased an? X-Fi Titanium Fatalty Pro. I have the latest drivers/software installed for all of my hardware and am using Windows 7 64-bit ultimate. There is no sound when the computer resumes from Standby or hibernate. I have to disable the driver in the device manager and then re-enable to restore sound. It seems the X-fi driver is not initializing when the computer resumes from these states. Problem does not occur during a normal cold start or restart.
i have an open ticket with creative support and need to find out if others are having the same issue on windows 7. Several folks having the same issue at this link with little to no success at fixing. I don't know if this is a driver thing, an IRC conflict or what. I have no had this issue on the same hardware with any other sound cards I've I had, to include an HT Omega card and the onboard sound; which leaves me convinced it is something with the X-fi card.
Please respond to this posting if you are having the same issue. If you have found a way to fix it, please say so as the creative support folks are still investigating and have asked me to give them more examples.

Just to confirm that deselecting entries in the "headphone detection" tab the creative audio panel seems to provide a temporary (but not an acceptable permanent) solution.
"Automatically mute speakers" provides the workaround but "automatically enable headphone settings" also needs to be deselected otherwise the PC will set to "headphone" on resume (rather than "5:" for example).
So it could be that on resuming from standby it is setting some internal headphone settings to mute the speakers.
I have created a support ticket hoping that this and the other post above might bring about a driver update.
Will keep testing and post any updates.

Using back SPDIF Motherboards outputs with X-Fi Titanium Fatal1ty Pro Series

I have an Asus Rampage Formula that comes with Digital Coaxial and Toslink outputs and a PCI-E sound card, Supreme FX II.
I was able to use both back SPDIF outputs with out any cable, you the card in the PCI-E slot, but I have change my card with a X-Fi Titanium Fatalty Pro Series, no im not able to use any of those outlets, im used the the Coax to my Home theater and the Toslink to me headphones.
Now I can only use the Toslink of the digital output of the X-Fi with my headphones but im not able to use the ports of the mobo to my home theater, is there a way I can use them? the card doesnt have a Coaxial output and thats the problem.
Also, my mobo has 4 pin SPDIF output port, so you can connect something there, but it seems that there are any cable from the output port of the mobo to the audio card....
I found this but Im thinking it might not work...
http://cgi.ebay.com/ASUS-COMPUTER-MB-ACCESSORY-SPDIF-OUT-COA-OPT-4pin-SPDIF_W0QQitemZ3504993780QQcmdZViewItemQQptZLH_Def aultDomain_0?hash=item3504993780&_trksid=p3286.c0. m4&_trkparms=72%3A234%7C66%3A2%7C65%3A2%7C39%3A%7C 240%3A38%7C30%3A%7C293%3A%7C294%3A50?
Any help will be really appreciated!
Thank You!?

Any [email protected]

Sound lag with X-Fi Titanium Fatal1ty Pro Seri

Hello to you all,
I just built a new computer and the problem I have is that sound lags with WMCE in Vista. My video card is ATI 4850 (52mb) and motherboard is 790gx. The internal sound and integrated video are both disabbled. Any suggestions as to fix the sound lag while watching TV on Media Center? I have no problems with music or games with this. Thanks to all.

Just to confirm that deselecting entries in the "headphone detection" tab the creative audio panel seems to provide a temporary (but not an acceptable permanent) solution.
"Automatically mute speakers" provides the workaround but "automatically enable headphone settings" also needs to be deselected otherwise the PC will set to "headphone" on resume (rather than "5:" for example).
So it could be that on resuming from standby it is setting some internal headphone settings to mute the speakers.
I have created a support ticket hoping that this and the other post above might bring about a driver update.
Will keep testing and post any updates.

Microphone Trouble with X-FI Titanium Fatal1ty Pro

I just cannot get my mic to work anymore, even when it did it was muffled and sounded awful, I have installed and re installed everything I can think of. Any suggestions?

Can anyone help me?

Not detected: Creative X-Fi Titanium Fatal1ty Champion and Windows 7

Hi!
i have a strange problem: my Creative X-Fi Titanium Fatalty Champion Soundcard is not detected when I want to upgrade or download PowerDVD.
It shows up in the devices list as "SB X-FI" though - but this seems to be the incorrect name!?!?!
Also I can not set the SPDIF out options.
I can listen to MP3's via Winamp etc. But I can not set Dolby Digital vcia SPDIF with PowerDVD for example.
I am using the latest official drivers.
Some forums say it's a hardware problem and I should exchange the card. Is trhis true or can I change software settings?

Anyone answer ?

X-Fi Titanium Fatal1ty Pro on Windows 8

Am I the only one having issues with this on Windows 8? To me, the final driver didn't solve anything, and I still have issues with sudden loss of sound for pretty much any application. I was looking forward to getting the final driver for some time, and was very disappointed when I found that I still had these issues.
Already tried completely uninstalling and wiping old drivers before doing a fresh install of the final driver, same thing.
FYI, I had no issues before upgrading to Windows 8!

Originally Posted by Foodog
I just removed Win8 and installed Win7 on my computer last night. Ran all updates including SP1 and installed Creative driver and apps. I still only have sound from right and left front speakers and no sound at all in MP4 video formats. Was gone for awhile and when I came home and brought computer from sleep mode there was no sound at all. Checked for muted or otherwise changed setting and there were none and still no sound at all. Opened up Console Launcher and switched mode to Audio Creation and suddenly I had sound but still only the right front and left front. Looks like Creative has managed to screw up Windows 7 along with Windows 8. Maybe if I go back to Win95 things will work.
If you are playing from a stereo source(only two channels, right and left) then you aren't going to have playback on all of your speakers, to have that you need to tell the console launcher to replicate the stereo signal to the rest of your speakers.
Like so
Attached Images
rep.jpg
(5.0 KB, 4 views)

MSI x58 PRO-E SLI+Creative X-Fi Titanium Fatal1ty Pro

Im thinking of buying a Creative X-Fi Titanium Fatal1ty Pro for some better sound, problem is that I cant see if this is gonna fit in the top PCI-E slot because of the cooling block there.
Does anyone know if this will fit or not?
here is a pic of my current setup:
http://twitpic.com/1zvxnz

You asked if it would fit the other slot and I said it would, if the heatsink does in fact prevent you from using that slot then you can use any other available PCIe slot. A 1x PCIe card will work in any PCIe slot no matter what size the slot is.
I took a look at the pictures shot from an angle at MSI website and it does look as if it may not fit there. I also noticed that on the 1156 MB that the same HS on them have very short fins in line with that slot, makes me wonder why the 1366 MB HS is not like that.
I assume you don't have or can't borrow a card from family or friend to just test for fit in that slot?

Gigaworks S750 cables for the X-Fi Titanium Fatal1ty Pro Card?

Hey guys,
I got a nice Gigaworks S750 7.1 speaker system and want to use it with my new X-Fi Titanium Fatal1ty Pro card. The Fatal1ty pro has analog outputs for a 7.1 sound system, but the Gigaworks doesn't have the same layout. Can anyone help me find the cables I need to get this setup running?

Hi,
There are 4 Line Outs on the X-Fi Titanium Fatal1ty Pro card.
Line Out 1 jack - Connects to the Front Left and Front Right inputs
Line Out 2 jack - Connects to the Side Left and Side Right inputs
Line Out 3 jack - Connects to the Front Center and Subwoofer inputs
Line Out 4 jack - Connects to the Rear Left and Rear Right inputs
You might want to refer to the user manual of the sound card and speakers system for more information.
You can still utilize the suppiled 7.1 cable. Just leave out the grey connector (side speakers) and use a single 3.5mm cable to hook up both ends.

Titanium Fatal1ty Pro product numbers?

I've discovered this, and I am honestly quite confused.
On Creative's official store, the Titanium Fatal1ty Pro has the SKU 70SB088600002 . Looking at my own local stores, I see a very similar code (70SB088600000), where the only difference is the last digit being 0 instead of 2. That's not all though. Some retailers also have the quite different code of 30SB088600000 . That's three SKUs, apparently for the same product. Nothing indicates that either is the champion edition (the package including a front bay). Do these differ somehow?

You can use the product page on the online store as a reference to make sure that you are not missing anything. If you are buying from an online reseller, you might want to sure they are authorised & trustworthy retailers.

No EAX in games on PCI Express X-Fi Titanium Fatal1ty Pro

9No EAX in games on PCI Express X-Fi Titanium Fatalty Proo Hey all!
I am another seriously frustrated Creative customer who spend a lot of money on the most crappy hardware I have ever owned. :angry:
I own the PCI Express X-Fi Titanium Fatalty Pro and have problems getting EAX in OpenAL games. I think I finally got it to work in Trackmania but in Race Driver GRID I have no effects what so ever. A correct working X-Fi setup with GRID should sound like this.
I have tried almost anything by now - downloaded the latest OpenAL 2. from this forum, copied OpenAL files back and forth, tried daniel_k's latest driver package which gave me BSOD! Please - can someone help?
Rightmark via DirectSound and Alchemy works like a charm by the way - full EAX 4.0 supports etc.

=Re: No EAX in games on PCI Express X-Fi Titanium Fatalty Pro? AlCapsViewer info:
System Information
Report Time: 200/3/9 6:25:28
BIOS: A_M_I_ - 3000906 BIOS Date: 03/06/09 4:05:0 Ver: 08.00.4?
Processor: ~3400MHz Intel(R) Core(TM)2 Quad? CPU? Q9550? @ 2.83GHz
Memory: 8 GB
Default Audio Device Name: H?jttalere (Creative SB X-Fi)
Audio Driver Filename: {0.0.0.00000000}.{6d9fcb07-da45-4a72-a7c7-40d9978d64a}
Audio Driver File Version:
Audio Driver Product Version:?
ALCapsViewer Version: .0.3.0
OpenAL Components
Name??? Path???? Version??
OpenAL32.dll? C:\Windows\system32\? 6.4.357.22?
wrap_oal.dll? C:\Windows\system32\? 2..8.
OpenAL Devices
Name: Generic Software
Sample Offset: Yes
Linear Distance Model: Yes
Exponent Distance Model: Yes
Capture: Yes
Enumeration: Yes
EAX 2.0: Yes
EAX 3.0: No
EAX 4.0: No
EAX 5.0: No
X-RAM: No
Enumerate All: Yes
EFX .0: Yes
Seems that both my X-Ram and EAX is not detected..... Help please!

T6100 with X-FI Titanium Fatal1ty Pro and Windows 7 x64

Similar Messages

Maybe you are looking for