Tab between panels in develop

This is my third (and last) request (in no particular order) related to better keyboard navigation in the develop module (see also Snap exposure adjustment to round number and Use Tab to move between adjustment brush settings).
My preferred way to work through the develop panel is to [Tab] and   [Shift]+[Tab] through the adjustments and use the up and down arrows  (and occasionally the number pad) to  make changes, adding the shift key  for large changes.
This works well, until I get to the last adjustment on a panel (is that the right term?) and want to move to the first adjustment on the next panel. For example, after making all the necessary adjustments in the Basic panel, ending with a little bump in saturation, I'd like to hit [Tab] and be taken to the Highlights field in the Tone Curve panel. Currently, hitting tab only exits the saturation field, and a manual selection of the next field is required with the mouse. This is not a big deal with each individual photo, but over time, the time savings would be substantial.
Thanks!

I just double-checked, using and LR 3.2 on Win7 x64, pressing [Tab] cycles from the last field in a panel back to the first field in the same panel (e.g. Saturation to WB), rather than to the next panel (e.g. Saturation to Highlights), which would be my preferred behaviour. Seems strange that this behaviour would be different between platforms, but it gives me hope that Adobe would be open to changing the Windows version's behaviour.

Similar Messages

  • Command-tab between Safari and another application

    When I command-tab between Safari and another application such as Word, when I return to Safari I am on a different web page.  When I use History to return to the page I want, I have to sign back in again.  How can I fix this?

    It's CS4 6.0.3 on OSX.
    The other application is a web app in development.
    My guess now is Flash compiles the fonts and it sees Antihistory regular as Antihistory book and our website is expecting regular.

  • Pass values between panels in different UI files

    Hi All,
    Is there a way to pass values between panels belonging to User Interface files ? Or is it easier to have one .uir and different .c and .h files ?
    Thanks,
    Kanu

    I should say that it's not possible for you to trap events from the first popup,and this depends on the basic concept of "popup panel".
    When you install a popup panel, all user interaction with existing panels is excluded: all focus it aimed at the popup only, no other user interface event is generated. If you launch another popup from the first one, the second popup prevails over the first one and no event can be generated on the first panel until the second one is closed.
    Handling a chain of two popup panels while looping on GetUserEvent can lead to unpredictable situation not so easy to untangle.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • Tab between two textFields

    I have two text fields for entering numeric data and would like to touch the first and key in a number then hit the next key on the keyboard and go to the next text field to enter a number there also. As it is, when I type in the number on the first text field, i have "next" in the bottom right. When I touch "next" the keyboard disappears. If I go to the second text field and key in the number I have "done" in the bottom right that when touched makes the keyboard disappear.
    Is it possible to set this up that after the number is keyed in the first text field I can touch next and it send me to the second text field? And, after keying the number in the second text field I can click "go" or something that will trigger the "calculate" button i've implemented?
    I've searched for an hour and a half through all the developer section and didn't find anything other than "Enable Tabbing Between Text Fields" in a tutorial, but its for a desktop and not iphone.
    Any advice is appreciated!-)
    Also, is there a numeric keypad that can be called instead of the regular qwerty?
    Thanks sooo much,
    Jazmyn

    Anyone, please.

  • Why do I have to use the tab key even more to tab between page elements.

    Firefox versions prior to ver 4 I used the tab key to tab between page elements (form elements, buttons, etc). I upgraded to ver 4 and now when I tab from form element to form element I first see a gray line outlining the element area and then another press of the tab the element becomes active for me to use. I now have to use double the tab keys to move between form elements.

    Hello new_mac_user, see if the next works
    # In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
    # Click '''I'll be careful, I promise!''', to continue to the about:config page.
    # in search field type (or copy/paste from here) '''accessibility.tabfocus'''
    # double-click on it and change the value to '''4''' (probably you have 1 the default on mac)
    # click ok, exit firefox and restart it.
    with the above you give focus to links (and linked images) only when you press the tab key.
    see for more info : http://kb.mozillazine.org/Accessibility.tabfocus
    https://developer.mozilla.org/en-US/docs/Mozilla/Preferences/Preference_reference/accessibility.tabfocus
    thank you

  • Accordion tabs w/panel sub-nav - default open issues

    I have a spry accordion in a left sidebar, and I'm using it as navigation for a slideshow for a website I'm working on. Each of my 5 accordion tabs has a different category of slideshow, with each panel having multiple sub-navigation links that each link to a different slideshow which appears in the main part of the page (to the right of the sidebar). Say it's something like this:
    VENUES (tab)
    (start panel)
    Bayside Restaurant (link)
    Historic Ballroom (link)
    Western Ranch (link)
    (end panel)
    ACTIVITIES (tab)
    (start panel)
    Surfing (link)
    Dancing (link)
    Horse back riding (link)
    (end panel)
    The sub-navigation to each slideshow is activated by simply clicking on the text, which I linked with the "point to file" link tool in the properties menu. 
    Ideally, I'd like to work with one template in Dreamweaver for all pages/slideshows I'm creating, but I'm running into a problem.  I know how to change the default panel in the .js so that a different one appears open when a user first accesses the page, but I can't figure out how to get the default panel to change when the user clicks on a different panel and attempts to use the subnavigation.  The subnavigation works just fine (it takes the user to the correct slideshow), but then the panel snaps shut instead of remaining open on the one the user selected.
    (So, to further explain with the example above, say the user wanted to look at all the links in the "Venues" tab, but the default is to have the "Activities" tab open on arrival.  The "Venues" tab opens just fine on the click, but as soon as the user clicks on, say "Bayside Restaurant," the correct slideshow appears to the right, but then the "Venues" tab snaps shut and the "Activities" tab and its sub-navigation appears open again. The user then has to click on the "Venues" tab again if s/he wants to see the other options and view a different slideshow, rather than simply being able to click on the next link.) 
    I tried making multiple templates, with different default panels open as a solution, but that's not working either. . .for some reason it keeps defaulting back.  
    Does this make sense?  Are there any solutions to this problem? Any help would be much appreciated.
    Thanks!
    Rebekka

    I think I found your problem.  It lies in the Javascript:
    <script language="JavaScript" type="text/javascript">
    var indexAccordion = new Spry.Widget.Accordion("indexAccordion");
    var acc1 = new Spry.Widget.Accordion("indexAccordion", { useFixedPanelHeights: false });
    </script>
    You have essentially duplicated the code in order to accomodate the useFixedPanelHeights.  Consolidate it into single one, and remove the duplicate:
    <script language="JavaScript" type="text/javascript"> var acc1 = new Spry.Widget.Accordion("indexAccordion", { useFixedPanelHeights: false }); </script>
    IE might be having trouble understanding the double instances of the script and is ignoring the latter one.  Just keep the latter one and it might fix it.
    Also, thanks for the tip, but I use Chrome's Developer Tools... it just didn't cross my mind since I've been busy =)

  • Tabbing between xcontrols

    Dear all,
    I need to tab between multiple XControl controls on my UI front panel.
    The tab order has been set for each XControl on the front panel
    The XControls are of the same type and only have a single numeric control in the facade.
    Currently using the tab key just highlights the numeric control in the XControl facade and does not move the focus to the next XControl as specified by the tab order.
    Is there any way to tab between XControls?
    Thanks,
    P

    It might be behaving like a tab within a cluster.  If you have a control selected in a cluster then tabbing will just cycle through controls in that cluster.  You need to CTRL + Up Arrow or Down Arrow to go into or out of structures.  I assume the XControl is behaving like that.  You could try to do some fancy work detecting the tab button press, and then intercept it and press CTRL + Up, then CTRL + Tab if the keyfocus is in your XControl if this is the case.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • Text entry fields not able to tab between 2 fields

    Hi there,
    I have placed 2 text entry fields that are for username & a password, I on publish/preview, I type the username and go to hit the TAB key to move to the password field but nothing happens & cursor does not move to the other field...
    I did try a quick search for this question as I thought it must of happened before to others, but could not find what I needed..the answer ;-)
    Kind Regards
    Rossco
    DOH! I just found some more information on tabbing between these fields, so will check that out fisrt........must be Friday (over here)

    Hi There,
    Welcome to Adobe Forum.
    Have you tried using the shortcut option assigned as "Tab" in the action properties of the text entry box as shown in the following image:
    Thanks
    Loveesh

  • I can no longer tab between cells in a table with pages 5.0.

    I use pages everyday for filling in my work booking sheets. I need to have them synching to the cloud, so I can access the client information while on the road.
    My booking sheet is basically a large table with many cells for name, address, phone number, etc. In pages 4.3 I could enter some information into the cell, hit the tab button, and it would go straight to the next cell in the table. This was a quick and easy way for me to fill out my forms on the computer.
    Well, since the update, the tab button only moves the cursor over in the same cell, as opposed to the next cell. It is VERY rare to need to tab in a cell, as opposed to going to the next cell.
    I did figure out that I could Option+ Tab to move to the next cell, but it is very hard to change my procedure of tabbing after all this timing doing it the other way.
    Am I just missing a preferance to tab between cells, instead of inside a cell?
    Thanks
    Dave

    Option-tab makes sense and can be done with the left hand's thumb/forefinger.
    Using tab was always arse-backwards as it defeated the use of tab within the table cell.
    Best to use both for what they always do:
    Option tab or an arrow key (singular) to jump cells
    tab to jump to the next tab in the text wherever it is within or without cells.
    The contrary precedence was set by Microsoft and was a bad idea. In good UI you do not have shortucts reverse roles such that you need to pay excessive attention to the context.
    Peter

  • How do I share tabs between my different Firefox installations using the new Firefox Accounts system?

    I am using Firefox Nightly (30.a1, 2014-02-18, x64) on my laptop computer (Windows 8.1 Pro x64) and I was using Firefox Beta on my Nexus 5 (Android 4.4.2). Recently, Mozilla announced the new Firefox Accounts system (which is replacing the old Firefox Sync Account) and I created a Firefox Account for my laptop Nightly installation. Since the new Firefox Account doesn't work with the old Firefox Sync Account, I replaced my Android installation of Firefox Beta with Firefox Nightly and signed into Firefox Account on my Android. However, when I attempt to send a tab from my Android installation to my laptop installation using the "Share to Nightly" intent, Nightly asks me to set up a Sync account, which is impossible to complete in my laptop Nightly installation. I've tried replacing my Android Nightly installation with an Android Aurora installation, but the same problem occurs.
    What's worse is that even with both my laptop and Android installations signed into the same Firefox Account, I cannot see any information being synced between the 2 installations. No history is being shared, and I cannot see the open tabs list from the other device. I cannot pass tabs between my phone and my laptop, which is something I used every week as I visited websites and read my RSS feeds on my phone. Does anyone know how to share tabs using the new Firefox Accounts? Does anyone know why Firefox Accounts does not seem to be syncing data between my 2 installations?

    Unfortunately with further investigation, Roland informed me that share tab was removed[https://bugzilla.mozilla.org/show_bug.cgi?id=965811]

  • When alt + tab between applications firefox freezes to a black blank screen and will not move. The only response it will allow is the close option after right clicking on the task bar in English

    I normally have several applications running at the same time, some of them are running 24/7/365.
    When accessing the applications its easier to alt+tab between them. On the occasions that I can actually get Firefox to open and stay open it always freezes and remains immovable on the screen after switching to another program.
    Firefox goes black except for the border and the close button at the top right. The other buttons disappear. Even after waiting for a period of time it does not clear.
    The freeze can occur either on the first switch or second switch. However, it always happens.

    Have also since found out that to start FF4 in safe mode you just hold shift whilst double-clicking the icon. We only find these things out after the event, murphy's law!

  • Color shift between Library and Develop module

    Hi,
    I recently noticed a color shift between in the image when going from the library to the develop module. Yes, I know this is mentioned in the FAQ, but I did not find the solutions given there to be satisfactory.
    Let me explain what happens: I have taken Photos with my Canon EOS 300D, in Jpeg mode with Color Space in the Camera set to AdobeRGB. The photos I am talking about were taken with Tungsten light with auto white balance and have a distinct orange color cast. I use Windows XP and view my Photos on a LCD Display calibrated with the Pantone Huey system. The Lightroom Library Module and Photoshop CS2 both display the original image almost identically (there are no changes applied inside Lightroom or Photoshop, I view the original image in both applications). Photoshop is set to use the Adobe RGB Color space as its working Color space, Softproofing is switched off. However, when I switch to the Develop Module, the colors (especially the orange hues) shift very noticably toward pink. I can only assume that the Colorspace conversion or maybe some implicit soft proof used differs between the modules. So, to restate the problem: If I switch back and forth between Library and Develop, without changing anything and in 1:1 view to avoid errors introduced by different zooming methods, the colors shift quite drastically back and forth.
    I have to say that this is really quite annoying. The whole point for me to use the develop module is to use it to make adjustments to the colors, and for this to work properly I have to see the same colors in both modules and in Photoshop. There is no point in correcting a pink color cast away in Develop that is not even there in either the library module or Photoshop (and that would then have a stronger orange tint because I tried to counter the pink tint in develop).
    So this leads me to the final question: Is it possible to tell Develop to use the exact same color settings as the Library Module? Or is there another way to compensate for the color shift?
    I hope I was clear in what happens and what I tried to do. If it helps I can gladly provide a sample photograph that clearly illustrates the point.
    Thank you in advance for your help,
    Daniel

    Thanks for your comments, Don and Fred. I hope that this issue will be worked on soon.
    Fred, I have set the Preview Quality to High, but it doesn't seem to make any differences concerning the color shift. I have investigated this matter further by now and made the following observations:
    *The color shift is a lot less noticable on my laptop (the laptop screen is also color profiled). On my laptop the change is more of a subtle shift in contrast than in color. This might be caused by the smaller color gammut of my laptop display though.
    *I have uploaded a testimage so that others can check if this shift occurs at their workstations too - after all, it might be a misconfiguration of my color management software, though I doubt that (because Adobe already states that library and develop render different previews). I would be interested if the color shift I describe is noticable at other workstations too. The link to the testimage: http://www.danyx.com/colorshift.jpg (permission to use the image to test the color reproduction is of course granted hereby).
    Thanks for your help, I hope Adobe will listen soon,
    Daniel

  • Auto-tabbing between input text fields in AS3

    Hello-
    I am having some trouble figuring out how to work auto-tabbing between input text fields when a user inputs a character. I have a series of text boxes with maxChar set to 1, and when the user inputs a character, I would like it to auto-tab to the next one. I'm putting together a crossword-style banner ad so the auto-tabbing will help tremendously.  All the input text fields are instanced on the stage as input1, input2, etc; not called in from a custom class.  Also, I've been working with AS3 for about 2 weeks lol!
    thanks!

    Awesome, thank you, that works nicely! Now I need to figure out how to capture individual keyCodes for each input and then come up with a conditional to check for right or wrong answers. I have a "check your answers" button all set up. I think I am almost there, possibly a syntax hiccup for me. Any advice on how to do that would be appreciated.

  • Shortcut for switching / tabbing between open documents?

    Hi. In Mac OS in general, you can switch between open documents or windows in the same program via the shortcut COMMANDO + >. Like for instance different windows in Firefox. But in Numbers and Pages, this means zoom in or out.
    Does anybody know a shortcut to switch / tab between the open documents in Numbers and Pages?
    I have searched google, here and e-mailed for help and found nothing.
    Thank you!

    Hello Jerry.
    There ARE keyboards like that:
    http://www.ergoblog.com/2006/09/keyboardwithe.html
    http://www.sspdirect.com/large-letter-keyboard.html
    You see, just google for "Large letter keyboard" and maybe add Mac. But ones without Mac symbols works just as fine, you just have to learn which key is which.
    Seems there is no solution to my tilde-problem...
    Thank you my french friend, for the understandning of the swedish problem
    Regards,
    Kip

  • ANN: Linking to non-default Spry tab or panel - tutorial

    Spry 1.6 includes a file called SpryURLUtil.js that makes it
    easy to
    link to a specific tab or panel in a Tabbed Panels or
    Accordion widget.
    I've created a step-by-step tutorial explaining how to use
    it. You can
    find it on my site at the following URL:
    http://foundationphp.com/tutorials/spry_url_utils.php
    David Powers, Adobe Community Expert
    Author, "The Essential Guide to Dreamweaver CS3" (friends of
    ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

    That should be built in, as it is in all PVII Widgets.
    Being how Spry has grown to be such an important part of your
    books and
    other writings, perhaps you would agree (and maybe even be
    able to influence
    Adobe) that what Spry needs is a re-writing rather than
    updates.
    Al Sparber - PVII
    http://www.projectseven.com
    Extending Dreamweaver - Nav Systems | Galleries | Widgets
    Authors: "42nd Street: Mastering the Art of CSS Design"
    "David Powers" <[email protected]> wrote in message
    news:fokosr$l1e$[email protected]..
    > Spry 1.6 includes a file called SpryURLUtil.js that
    makes it easy to link
    > to a specific tab or panel in a Tabbed Panels or
    Accordion widget. I've
    > created a step-by-step tutorial explaining how to use
    it. You can find it
    > on my site at the following URL:
    >
    >
    http://foundationphp.com/tutorials/spry_url_utils.php
    >
    > --
    > David Powers, Adobe Community Expert
    > Author, "The Essential Guide to Dreamweaver CS3"
    (friends of ED)
    > Author, "PHP Solutions" (friends of ED)
    >
    http://foundationphp.com/

Maybe you are looking for

  • HELP!  Itunes 10.5.1 doesn´t work in windows vista?   "itunes.msi Error"

    My Itunes is not working after trying to download the newest update I get a can't find itune.msi ???? I goto programs and unistall on vista and try to uninstall itunes and I get WIndows Installer Error The Feature you are trying to use is on a Networ

  • Podcasts in the Artists directory

    I am thinking of buying a Nano 5th generation but I'm recounting my iPod Classic 5th generation which put podcasts in the "Artists" directory. Whenever I searched for music, I'd have to sift through all these podcast "artists" (they weren't music art

  • Help using torrent client + local network fileserver[SOLVED]

    as the title says i need some help in order to make it possible for either azureus or deluge to be able to see my local network's fileserver as unfortunately neither of the both can "see" the network (arch can see if ofc and i can browse the contents

  • Response not coming to BPEL process from the actionable email

    Hello Helping hands, I created a HumanTask workflow with actionable email. In the email I get from the HT workflow process, it has 3 links 2-OUTCOMES list links (Eg:APPROVE,REJECT) 1-worklist application If I update the task through worklist, the pro

  • SQL error during CMP bean deployment

    Hi, the following exception occures when I deploy a CMP bean to a remote OC4J server (it works fine when I use the internal OC4J process of JDeveloper using the same JDBC connection): Auto-unpacking E:\Apps\OC4J\j2ee\home\applications\statful.ear...