Tab Control Solution for my project

I am implementing the program acquisition and signal processing. The program has two parts are Aquisition and Analysis. I want to integrate into a program should use the "tab control". Each program section have some special processing so I do not know how the tab control to not conflict.
+ Aquisition Tab will perform receiving signals continuously from the computer through the COM port, recording the file by "write the measurement file" .tdms
+ Analysis performs the "read measurement file .tdms", which have been recorded to display and several other process.
I expect people to help to have appropriate solution for the tab control for my project.
Attachments:
EMGbk_UI_standard.vi ‏171 KB
2603_sEMG_10.zip ‏342 KB

Hi ducta,
 Ofcourse you can integrate the tab control in your project.But please clarify me on this question.
 Do you want to use the tab control in a toggling fashion?i.e. initially keep the tab in acquisition and then change the tab in analysis and then again change it to acquisition.If you are using this way then only it makes sense as the acquisition and analysis will hand in hand according to the tab control.
Regards,
SrikrishnaNF 

Similar Messages

  • What is a Secure remote Control solution for ipadv3  to osx 10.8?

    I have a desktop and a laptop that I need to control via remote using my iPad 3. I am an administrator of a small network and it is against co policy to use vnc as my MacBook opens up with my access when I control it via vnc/apple desktop sharing. I need a more secure rdp like solution. I cannot use any external solutions like log me in, go to my PC... or the like. re: Against co policy.
    I opened two tickets and asked one simple question. Can apple confirm that no apple so has a secure remote access feature built in? With confirmation I can justify having to purchase or develop a solution. They would not admit it.
    Rdp is mediocre and somewhat secure. What is the issue for apple to use it for their so?
    How about Remote Desktop via a sash tunnel and lock the desktop?
    Does anyone have a simple cheap or free solution?

    Well the old VPN Client was the ONLY IPsec remote access VPN client that Cisco offered. So they wouldn't need to say "we recommend this one vs. that one" would they?
    Any migration needs to take into account new features and potential issues with the new client software. So you would need to confirm your VPN head end type, version, licensing, etc. Decide whether you want to use IKEv2 or sSL transport. Decide how you want to deploy the client software. Decide whether you want to make any changes to the features deployed given the expanded range of capabilities offered by AnyConnect, etc.
    Hope this helps. Please rate helpful posts.

  • Controlling Config for Project System

    Hai,
    I have Scenario where in project is triggered when sales order is created using a planning startagy 85(Assembly processing with network/project). for this scenario can anyone guide what are all configuration settings to be done in the controlling module for the project settlement.
    govind.

    hello,
    u r talking about MRP run ie make to order when sales order is created then process starts with production order which is to be converted to plan order by using t.code md02 and md04.
    At each stage u have to maintain actual data and plan data.
    u need to configure controlling related to production run process.
    hope this may helpful to u.

  • Is there a widget for Volume Control for HTML5 projects

    Is there a Volume Control widget for HTML5 projects in Captivate 8? How does articulate do it?
    Is there a 3rd party Volume Control widget?

    Hi there
    "Adobe Captivate will need to change to complete."
    I'm assuming here you meant to type "compete". But that's the nature of any upgrade, no? I'm sure that Captivate will change.
    For what it's worth, I was toying with creating a simple audio player. Captivate does offer a way to increase the volume and decrease the volume using Advanced Actions. It works for SWF output. Unfortunately, it doesn't seem to work when Captivate produces HTML 5. I didn't test with Responsive output.
    Cheers... Rick

  • Concept of controlling for banking project

    Hi experts,
    Can any one help me about, what are the required controlling concepts for banking project.
    Regards,
    Nagesh.
    Moderator: That's highly dependent on the clients' requirements

    HI,
    This is Mandatory for the Controlling part in Banking Projects
    Credit Risk & Profitability Analysis (light)
    Contract Accounts (FI-CA) u2013for Loans Collection
    Regards,
    Srinivas Muthyala

  • Tab control name editing

    In my application i am using tab control . 
    For that i want to programatically change tab names and i want to enable and disable a specific tab .
    In property i cant find this option and in discussion forums i could not able to open the vi mentioned in the link 
    http://forums.ni.com/t5/LabVIEW/Change-values-of-Tabs-on-Tab-Control/m-p/677900#M311358 
    What might be the problem .
    Thank you
    Raja
    Solved!
    Go to Solution.

    You are have your answer concerning enabling and disabling tabs. Concerning the first part of your question you can not dynamically change the names of tabs at runtime. The reason is that logically tabs are enumerated with the tab names being the enumerations. In other words the names aren't properties that you can change, they are part of the datatype.
    Now what you can do is use a combination of buttons and enabling/disabling controls to simulate the appearance of a tab control - which might not be a bad idea given the problems that tabs can cause.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Document Management System for Struts Project

    I am doing a J2EE project in struts, in which i need to implement document management system containing the following features :
    1. File Upload/Download
    2. File Sharing
    3. Giving Permissions to Files, etc
    Instead of building a DMS from the scratch I am looking for a open source DMS solution which I can customize as per my needs and implement in my project. Since my project is based on struts, I am looking for a struts based solution.
    Please tell me if there are any good open souce DMS like these.

    hi jitesh,
    now i am doing the same project which you have done with struts framework. please let me know the solutions for the project.
    please reply to my mail id = [email protected]
    thanks.
    nandha.

  • Tab Controls - Adding a page programmatically?

    It's probably not possible from what I've read on this forum, but I would really like to be able to add tabs
    programmatically (v6.0.2). But, having just read that they are like enums and are read only (can't change
    page names) it looks like this is going to be an unfulfilled desire.
    Though what I want to do can probably be done easily enough using hidden tabs it's annoying to not be able
    to control the order of the tabs nor the text. I don't want to have anything on the pages but just want
    to have the tab control there for switching between what is displayed in another control.
    Thanks,
    Naveen

    No, unfortunately, you cannot add pages programmatically to a tab control. The best you can do is add as many pages as you would ever possibly want at run time when you are building your tab control. Then use the visible property for the pages to determine how many are displayed at any time.
    Matt Kisler
    Applications Engineer
    National Instruments
    http://www.ni.com/ask

  • Displaying child clusters in a tab control

    I have a data structure comprising of 2 clusters, each cluster has 4 sub clusters. I also have 2 tab controls, one for each parent cluster. I want to display the contents of each sub cluster on its own tab page.
    My thoughts so far have gone towards placing a cluster in each tab page and copying or linking each sub cluster into them, but this seems very inefficient. If anybody has a suggestion on how best to approach this, I would appreciate it.
    Ed
    - Cheers, Ed

    I believe I want something like this. My sub clusters are displayed on their own tabs, and in the block diagram they have been made members of the parent clusters for ease of sending them to sub VIs.
    The updating of the display clusters seems slightly long winded, and given this application is going to be fairly large I'm sure there must be a better way of implementing this. If anybody has some ideas or suggestions I would be grateful.
    cheers, Ed
    - Cheers, Ed
    Attachments:
    clusters.vi ‏31 KB

  • I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question).

    I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question). I haven't had this issue before, I have always used the content library on the screen but haven't used this for about a month. How can I make the Content Library available?

    Thanks so much! I am backing up the entire computer now with an external hard drive - this should be fine right? And surely if I am backing up the whole computer these projects/videos will be backed up too? I wasn't sure how to do this any other way and I am clearly not great with tech issues. Once this is done and I am sure my projects/videos are safe I will do the delete and reinstall bit. Thanks for taking the time to help

  • When I resize the font for the Page Labels on the tab control in LabVIEW 7, the Increment/Decrement size gets messed up. Is there a solution to this problem or is this a bug?

    I have noticed in LabVIEW 7.0 and 7.1 that when the text in the page labels display is enlarged, that the arrows enlarge but the top arrow enlarges more then the small arrow but then when you decrease the text size, the arrows stay remain large. This is not a problem in 6.1 because the arrows aren't available. Is there a work around for this bug or do I have to use small text for these page label arrows to look right?

    I must admit that I've never used the page labels display and it does look like a bug. You can fix it however. Select the tab control and choose Advanced>Customize. In the control editor, select the page label control and do the same thing. You should be in the control editor for the numeric control and then you can go to edit mode and enlarge the decrement arrow to make it the same size as the increment.

  • Menu ring for tab control

    Hi,
    I use a tab control which got in the meanwhile more tabs than could still all be displayed simultaneously. That's why I would like to use a menu ring instead of the tabs in order to control which tab will be displayed in the forefront. However, I could not yet figure out how to change the "page label display" of the tab control into a menu ring. Have a look onto my simple example. I guess you agree that my current solution doesn't really look like a pull down menu although it works like one. Any hint how to improve the design?
    Thanks in advance,
    Peter
    Attachments:
    Tab_Control.vi ‏17 KB

    Here's an example that is based on an example that ships with LV. I cleaned it up a bit so it would look mre like a "real" application. It's not great from the standpoint of code design (No error handling for instance) but it shows how these plugins could work.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
    Attachments:
    subpanel.llb ‏72 KB

  • Tab Control Property Node gives a build error when used in a VI for LabVIEW PDA

    Hello,
        Iam new to LabVIEW development & need help regarding this:
        We are trying to port a LabVIEW application from desktop to a Windows Mobile PDA. Please note that the LabVIEW application works fine on the desktop. In one of the VIs, a Tab control property node is used which gives a build error with LabVIEW PDA project. A sample VI which shows the problem & the error list snapshot is attached with this post. Can anyone please suggest an alternate approach to achieve the same functionality with LabVIEW PDA? Waiting for an early response from anyone...
    Thanks & Regards,
    Subhashini
    Attachments:
    VI_Error.zip ‏31 KB

    Hello Ton,
        Am glad that i got a response, thanks. The following links indicate that Tab control is supported on PDA target:
    http://digital.ni.com/public.nsf/allkb/CBA335641E27B858862571490015EA88?OpenDocument
    http://forums.ni.com/ni/board/message?board.id=170&message.id=221507&requireLogin=False
        I feel that the Tab control property node that has been used in the VI (which is attached earlier) may not be supported on the PDA target. Can u (or any LabVIEW expert) suggest an alternate approach to achieve the same goal with LabVIEW PDA (changing colour of Tab control pages programatically)??
        I had missed out some details earlier: We are using LabVIEW 8.5 PDA module on a Windows Mobile PDA.
    Thanks & Regards,
    Subhashini

  • How to add a new tab for the project?

    Dear All Experts,
        Could you tell me how to add a new tab for the project?
        Pls refer to the screenshot as below:
    Thanks!
    Xinling Zhang

    Hi,
        The new tab in cj20n , and the new tab can only be displayed in the highed level.Pls refer to below
        And in cj02, there is no this tab also in the wbs detailed screen,
    Thanks!
    Xinling

  • Hi, I recently upgraded my xcode to 5.1, my project is running well in ios 7.0,6.0, But in ios 7.1 i'm getting error like"iOS Simulator failed to install the application". Can anybody please suggest the solution for it.

    My project is not running in ios 7.1 simulator i'm getting error like "iOS Simulator failed to install the application". Please suggest a solution for it.

    We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Maybe you are looking for