Tab Order under Control Properties - Display Tab not working

At present I'm trying to order a couple of Input-Fields and Checkboxes for the Tab-Key. Therefor I tried to use the "Tab Order" Property in the Control Properties - Display Tab - Section: Layout - Tab Order.
In the SAP Library this property is described that way:
When user tabs through the controls of the component in runtime, the number indicating what place this control has in the tab order. Note that -1 removes the control from the tab order entirely and 0 indicates that it is highlighted according to its appearance in the component
Source: [Help.sap|http://help.sap.com/saphelp_nw70/helpdata/en/42/c2ba7f545e3116e10000000a1553f7/frameset.htm]
The problem now is that VC is completely ignoring this property and just using the tab order in the way the (Input-) fields where created.
At present I don't see any opportunity to give my "Form view" any logical tab order.
Is there any workaround? Is it a bug? Is there something I'm doing wrong?
Thanks for your help in advance.

Hi,
It seems that this tab order works only for few of the controls like pushbutton, radio button, checkbox, toggle button...
i too tried this in my model but it was not working for the input fields of other types.
regarding -1 -2 ... these values work normally as per their values here -1 -2 order functions just like 2 1.
hope this helps you.
Regards,
Rk.

Similar Messages

  • "Tab" control and Tab order of controls inside the tab

    Hello everybody,
    I have created the tab control with 6 'tabs', inside every tab I have some controls, like edit fields etc. I wanted to make an order of controls for every tab, so I have selected the option "Tab-order settings" from menu "Edit" (sorry for translation, I use non-English version of LabView), and tried to set the order. After saving it with "OK" button it turned out that the order is not changed. Simple it seems that the option doesn't work for controls in tabs. Is this a bug or do you have a solution for this?
    TIA,
    Yazilim.

    Sorry LabviewGuru, but I haven't found anything concerning Tab control and tab order inside it. Of course, I have found the topic "tabbing through front panel objects", but it simply describes how to change order for standard controls, not for controls which are inside the Tab control. But maybe you have another, extended help? So can you please copy and paste to discussion forum message this part of your help which concerns the Tab control and tab order, and then send the message?
    TIA,
    Yazilim.

  • My thunderbolt display is not working with my MBP retina 13''

    Hi,
         I just received both a new macbook pro retina 13'' and a thunderbolt display. Everything was working properly yesterday but today, I have no clue why, the thunderbolt display is not working anymore.
         . the power supplier for my laptop given by the thunderbolt display is still working;
         . when I don't connect my laptop through the thunderbolt connection, I can use the usb sockets as power supplier , for my phone, for instance;
         . as soon as I plug the thunderbolt cable, the usb socket is not feeding any more my phone, whereas the screen is not displaying anything.
         . If I take a look in the system report, in the thunderbolt tab, there is "no device connected"...
    I restarted plenty of time my laptop, took care to reinitialise the SMC as well as the PRAM, and nothing changed. I also disconnected the thunderbolt display, waited few minutes (and more), but nothing changed, again the black screen.
    Has somebody an idea?
    Thanks

    which model air do you have?
    try both a pram and smc reset
    plug the monitor into a different electrical outlet and a different port on your Mac (if you have multiple tb ports)

  • Satellite M70: Control button keys are not working

    I currently reformatted my M70 to WinXp Pro Sp2, downloaded all related TOSHIBA drivers and related programs [ie. Toshiba control button driver / program] and system is running normal. However, CONTROL BUTTON keys are not working, was working fine with XP Home edition and Win Media but when I called Toshiba Support they couldn't help me because I had upgraded to Xp Pro. My Question is...Is there a fix or a solution to this issue and where can I download or find this fix.
    Thanks
    Emm

    Hey Folks
    Thanks for the advice, however, I did download the control driver and the controls program for the M70 model AND installed them in that order. The Controls Driver installs correctly but unfortunately, when installing the Controls Program, I get a message that the program will not install because it's not the right version for my M70-CL3 [PSM73C]. Not sure what to do here. I would think that everything should work properly seeing as taking the step up to XPPro SP2 isn't that far of a stretch.

  • Installed Premiere Pro CS4 but video display does not work?

    I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
    1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
    2) the UI is way too slow for my big beefy system.
    My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
    Any ideas how to solve this CS4 install issue?
    Ron

    I would like to thank Dan, Hunt, and Haram:
    The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
    My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
    My PC is brand new with the following "beefy" components:
    Motherboard
    nForce 790i SLI FTW
    Features:
    3x PCI Express x16 graphics support
    PCI Express 2.0
    NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
    DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
    Overclocking tools
    NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
    ESA Certified
    NVIDIA DualNet and FirstPacket Ethernet technology
    Registered
    CPU: Intel Core 2 Quad Q9550
    S-Spec: SLAWQ
    Ver: E36105-001
    Product Code: BX80569Q9550
    Made in Malaysia
    Pack Date: 09/04/08
    Features:
    Freq.: 2.83 GHz
    L2 Cache: 12 MHz Cache
    FSB: 1333 MHz (MT/s)
    Core: 45nm
    Code named: Yorkfield
    Power:95W
    Socket: LGA775
    Cooling: Liquid Cooled
    NVIDIAGeForce GTX 280 SC graphics card
    Features:
    1 GB of onboard memory
    Full Microsoft DirectX 10
    NVIDIA 2-way and 3-way SLI Ready
    NVIDIA PureVideo HD technology
    NVIDIA PhysX Ready
    NVIDI CUDA technology
    PCI Express 2.0 support
    Dual-link HDCP
    OpenGL 2.1 Capaple
    Output: DVI (2 dual-link), HDTV
    Western Digital
    2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
    Features:
    10,000 RPM, 3 Gb/sec transfer rate
    RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
    p/n: TW3X4G1333C9DHX G
    product: CM3X2048-1333C9DHX
    Features:
    XMS3 DHX Dual-Path 'heat xchange'
    2048 x 2 MB
    1333 MHz
    Latency 9-9-9-24-2T
    1.6V ver3.2

  • Purchase Order Goods Receipt quantity tolerance setting not working.

    Team,
    We are using the IS-Oil solution, ECC 6.0 REL 605 SP LEVEL 009 .
    The issue that I have is as follows:
    Purchase Order Goods Receipt quantity tolerance setting not working, I had set up a 10% tolerance on QTY received in the GR process via the PIR and also the Purchase Value Key in the  material master and also changed the message to a warning in OMCQ for message number M0722.
    I  had performed a similar configuration and master data maintenance on a different NON IS-OIL client install and it worked fine.
    I believe it is the IS-OIL component in the Inventory update portion of the GR process that is causing the error.
    I have searched for OSS notes, however they mention that there is no solution.
    Setting the PO line item as Unlimited will not be best practice for the business and will not be used.
    Has anyone come across this issue? and how was it resolved, your help and guidance will be greatly appreciated.
    Thanks

    Hello,
    Please check the Tolerance levels in O588 
    Also you can use the BAdI OIB_QCI_ROUND_QTY: A new method, CHECK_TOLERANCE
    Best Regards,
    R.Brahmankar

  • Mac Mini + A1038 Cinema Display does not work

    Hi,
    I have a 2009 model Mac Mini with mini-dvi and mini-display port's on the rear. I can connect any of my DVI based monitors to the mac mini using either the mini-dvi to dvi cable or the mini-displayport to dvi cable. All monitors except for the A1038 model Apple Cinema Display.
    The cinema display works with 3 other computers with DVI ports, turns right on and is detected right away. When plugged into the mini it does nothing. Sometimes I can get it to work with the mini-dvi to dvi adapter but that is sporadic.
    This is the same behavior with a 2009 model mac book pro and macbook. Using the mini-displayport to dvi cable the cinema display does not work but 3 other monitors do.
    So my question is, why does apple hardware only work with non-apple hardware?

    Is the A1038 the old, plastic Cinema Display that doesn't have a power cord or power supply? It only has a video cable with the special ADC on it? If that's the case, it needs this to run from a newer Mac:
    http://store.apple.com/us/product/M8661LL/B

  • My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

    my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
    thanks!

    The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

  • The Control A key is not working. I cannot multi-select my songs. I'm not sure if it is the problem with iTunes 10.6.1.7 or my PC settings encounter issues. Also, i cannot find Album Artwork online using iTunes and i cannot select any view form but List.

    The Control A key is not working. I cannot multi-select my songs. I'm not sure if it is the problem with iTunes 10.6.1.7 or my PC settings encounter issues. Also, i cannot find Album Artwork online using iTunes and i cannot select any view form but List.

    The Control A key is not working. I cannot multi-select my songs. I'm not sure if it is the problem with iTunes 10.6.1.7 or my PC settings encounter issues. Also, i cannot find Album Artwork online using iTunes and i cannot select any view form but List.

  • HT6114 I just updated the last version of OS X Mavericks on my Mac Pro and my Thunderbolt display is not working correctly

    I just updated the last version of OSX Mavericks on my MAc Pro and my thunder bolt display is not working correctly. Could you please help

    Reset the NVRAM/PRAM and Reset the SMC, then try again.

  • Substitution written under cost center accounting is not working for tcode MB1B but working for MIGO_GI

    Hi All
    Do you know why this behaviour different for subtitution written under cost center accounting.
    We have written substitution using coding block table. Logic of substitution is in case of any GL maintained in a set is being used for posting , then we will replace the cost center with profit center vlaue. Reason being we have same naming convention for Cost center and Profit center.
    Thanks
    Sonia

    Hi,
    MB1B is t-code for stock transfer posting.
    Stock transfer posting generate FI document using balance sheet account, not P&L account.
    Because you don’t create cost elements using balance sheet accounts related to stock, I think that Substitution written under cost center accounting is not working for tcode MB1B is right.

  • My iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display :( please advise me a corrective action...

    my iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display please advise me a corrective action...

    Take it to an Apple Store and see about getting an out of warranty replacement. I believe it will run you about $150.

  • MSI Clock & Information Tabs In Control Panel\Display do not open

    I can't open the MSI Information tab and the MSI Clock tab in Control Panel\Display; keep getting the message that "an error occured while trying to run shell32.dll, control-rundll C:\Windows\system32\desk.cpl, display". Other than this, everything else is working perfectly. Any suggestions?

    I would also recommend a 3rd party solution.  On my 845PE with a GEForce3 Ti200 (MS8851), the system will reboot becuase of drivers problems (XP Pro) when accessing advanced page if I use the MSI controls.  
    Remoing the controls solves the issue.

  • DW CS4 properties display tabs cut off

    My Dreamweaver CS4 seems to work OK, but the bottom of the
    screen where the properties are located has a stripe through it and
    only 1/2 of the boxes are visible and some are not at all.
    View
    of problem
    As you can see the properties boxes are cut in half and
    useless. It only does this with the text areas, not images. I have
    full access to all properties with images.
    Works
    with images
    Is this an issue with DW or my computer?
    I have an ASUS G1 with plenty of ram and hard drive space,
    meets all the requirements and Vista Home Premium.
    Any suggestions?
    Thanks!

    Hi,
    Let me start by saying that in the original format, the Spry Menu Bar works extremely well in all browsers.
    The problems start when budding web designers/developers change the original settings and ruin the delicately composed original.
    Adobe's Spry team has actually made it quite easy to change colours, fonts and borders by allocating a section that is titled as follows:
    DESIGN INFORMATION: describes color scheme, borders, fonts
    There is no need to venture outside of this section to apply the required rules.
    I had a look at your modified style sheet and found too many changes detrimental to the functioning of the menu.
    My advice:
    Reinstall the original stylesheet
    Create a new style sheet called myMenuStyle.css or similar and load that after the original stylesheet
    Place you style rules in myMenuStyle.css as follows
    ul.MenuBarHorizontal a {
    background-color: #693;
      color: #FFF;
    checking the browsers after each step
    The above will allow you to check and keep the changes under control.
    I hope this helps.
    Ben

  • Tab in Tabstrip Control in display mode (Module Pool)

    Hi friends,
    I am trying to give authorization based on sy-uname, in runtime based on uname the particular tab should be opend in a display mode and some in change mode.  please help me out in this
    Edited by: shravan sonayila on Aug 12, 2008 8:06 AM

    Hi,
    when u creating tabstrip,while defining each tab in tabstrip , u have to
    create one subscreen for each tab.i think u want one tab for display
    mode and one tab for edit mode. if u want this way , in one tab try to
    give fields all in invisible mode this for display mode and goto second tab if u want all visible only keep like that only other wise u have create geoups.when u press enter ,groups will be change.it means visible , invisible modes.
    u have to give logic for screen in pbo.
    *&      Module  STATUS_0300  OUTPUT
          text
    module status_0300 output.
      set pf-status 'GUI_300'.
      set titlebar 'TITLE_300' with v_title.
      if i_aktyp = 'H'.
        if temp_flag = 1.
          loop at screen .
            if screen-group1 = 'GP2'.
              screen-input = 1.
              modify screen .
            else.
              screen-input = 0.
              modify screen.
            endif.
            temp_flag = 0.
          endloop.
        else.
          loop at screen.
            if screen-group1 = 'GP1'.
              screen-input = 1.
              modify screen.
            else.
              screen-input = 0.
              modify screen.
            endif.
            temp_flag = 1.
          endloop.
        endif.
      elseif i_aktyp = 'V'.
        loop at screen.
          if screen-group1 = 'GP1'.
            screen-input = 1.
            modify screen.
          else.
            screen-input = 0.
            modify screen.
          endif.
        endloop.
      endif.
    endmodule.                 " STATUS_0300  OUTPUT
    Try to give this logic.
    Regards,
    Ramya

Maybe you are looking for