TABbing between controls inside a panel to controls outside a Panel

Hi,
I have a C# winform with few controls inside a Panel control and few outside it.The TABbing order traverse from controls inside a panel to controls outside a panel.
Do we have any way to accomplish this.
Thanks,
sami

If you set the TabIndex of the Panel control itself to for example 77, the outside control with TabIndex 78 will be focused when you tab out from the control within the Panel with the highest TabIndex. Also make sure that you set the Tabstop property
of the Panel to true.
So basically the controls inside the Panel have their own TabIndex series (starting from 0) and the Panel itself is part of the Form's (or parent control's) TabIndex series.
It is just a matter of setting the values of the TabIndex properties correctly (and setting the Tabstop property to true for the Panel control).
The other option is to replace the Panel with a UserControl.
Please remember to close your threads by marking helpful as answer and then start a new thread if you have a new question.

Similar Messages

Tab between numeric controls?

Hi there.
I have several numeric controls on my front panel. When my vi becomes an .exe application, can I control which controls the cursor will go to if I hit the tab button? Right now when I hit the tab button, it goes to some random control on the front panel. thanks in advance for any help!
Don't think twice.
Solved!
Go to Solution.

sorry i guess I didn't look well enough. I was looking for the tabbing order inside a tab which is just right clicking on the page tab and click "reorder controls in page". thanks.
Don't think twice.

Tabbing between controls in iTunes?

This is ridiculous. I can't rely on space for pausing iTunes anymore because << is highlit by default and space activates whatever is selected!
What's more, clicking the controls from the front-most window when iTunes is in miniplayer mode will bring the application to the front.
Is there a way to change these sickening design oversights?

If you set the TabIndex of the Panel control itself to for example 77, the outside control with TabIndex 78 will be focused when you tab out from the control within the Panel with the highest TabIndex. Also make sure that you set the Tabstop property
of the Panel to true.
So basically the controls inside the Panel have their own TabIndex series (starting from 0) and the Panel itself is part of the Form's (or parent control's) TabIndex series.
It is just a matter of setting the values of the TabIndex properties correctly (and setting the Tabstop property to true for the Panel control).
The other option is to replace the Panel with a UserControl.
Please remember to close your threads by marking helpful as answer and then start a new thread if you have a new question.

Make all controls inside a Groupbox or Panel unusable without disabling them

Hello !
I'm using Vb.net 2013 , NET 4.0.
I'm trying to make all the controls inside a Groupbox ( or Panel) , unusable by users if a condition is true.
This is the code that I'm using :
Class NW
Inherits NativeWindow
Public Sub New(hwnd As IntPtr)
AssignHandle(hwnd)
End Sub
Const WM_NCHITTEST As Integer = &H84
Protected Overrides Sub WndProc(ByRef m As Message)
If m.Msg = WM_NCHITTEST Then
Return
End If
MyBase.WndProc(m)
End Sub
End Class
Dim nwss As List(Of NW) = Nothing
Public Sub block_area(flag As Boolean)
If flag = True AndAlso IsNothing(nwss) Then
nwss = New List(Of NW)()
For Each c As Control In GroupBox1.Controls
nwss.Add(New NW(c.Handle))
Next
Else
If flag = False And (Not IsNothing(nwss)) Then
For Each nw As Object In nwss
nw.ReleaseHandle()
Next
nwss = Nothing
End If
End If
End Sub
The problem is that this code works for all controls , except the TextBox and DateTimePicker . These 2 controls remain always clickable and editable so usable by users.
What can I do ?
Thank you !

Ok , friend , if you don't like this question , you can close it anytime. Next time when I need to make a question , I will be careful to do more hard questions like : " What will be the final result of a=1 a=a+1" . This is pure VB.net ,
I think.
I'm sorry if it upsets you that your code will not work as intended. Everyone here is just trying to help you understand that there is no good solution to your problem from a managed code perspective in Windows Forms. The best answers are to use a different
presentation system or to spin your own custom control at the Win32 level (or buy one from someone else who has already done all of that work). The next bester answer is to fudge it with an image that you capture and update as appropriate.
Reed Kimble - "When you do things right, people won't be sure you've done anything at all"
ok , can you only give me a simple answer : What is the WM code that has to do with pressing keys from keyboards in a control ? I try to modify my code if you help me with this. Thank you !
Hello Friend Here is my sample - very elementary, please make more good:
Public Class clsControl
Inherits Control
Public actualControl As Control
Private Property hiddenLock As Boolean = False
Public Property lock As Boolean
Get
Return hiddenLock
End Get
Set(value As Boolean)
If value Then
Dim _bmp As New Bitmap(actualControl.Width, actualControl.Height)
actualControl.DrawToBitmap(_bmp, actualControl.ClientRectangle)
actualControl.Enabled = False
actualControl.Visible = False Me.BackgroundImage = _bmp
Me.Controls.Remove(actualControl)
Else
actualControl.Enabled = True
actualControl.Visible = True
Me.Controls.Add(actualControl)
Me.BackgroundImage = Nothing
End If
hiddenLock = value
End Set
End Property
Public Sub New(ByRef _control As Control)
actualControl = _control
Me.Controls.Add(actualControl)
actualControl.Location = New Point(0, 0)
actualControl.Visible = True
End Sub
End Class
'FORM1 CODE
Private _c As clsControl
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Dim _txt As New TextBox
_txt.Size = New Size(100, 20)
_txt.Visible = True
_c = New clsControl(CType(_txt, Control))
Me.Controls.Add(_c)
_c.Size = _txt.Size
_c.Visible = True
End Sub
Private Sub Form1_Click(sender As Object, e As EventArgs) Handles Me.Click
_c.lock = Not _c.lock
End Sub
Enjoy friend I spent time to make it work.

Controls inside a panel

I'm developing a software with c# in Visual Studio Community 2013 and I need to put controls(groupboxes, buttons ... ) into a panel. I have tried some times and I got it, but they look strange. So, I want to heard your ideas about this problem or what is
my mistake, because those controls that I want to add in the panel are in another form and they look good.
I hope your helping! Thanks!

I'm developing a software with c# in Visual Studio Community 2013 and I need to put controls(groupboxes, buttons ... ) into a panel. I have tried some times and I got it, but they look strange. So, I want to heard your ideas about this problem or what is
my mistake, because those controls that I want to add in the panel are in another form and they look good.
I hope your helping! Thanks!
Hello,
It is not clear about your issue, would you mind sharing the screenshot with us?
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Blink a control inside a subpanel: is it possible?

What is the right way to blink a control button inside a subpanel?
I have done a simple program that loads an external VI (containing a control and an indicator) inside a subpanel: when i try to blink the button, the property node returns TRUE value, but i don't see the control blinking.
Solved!
Go to Solution.
Attachments:
blink control inside a subpanel.vi ‏19 KB
OK Button.vi ‏7 KB

I'm not able to look at the code where I am, but it looks to me as if the vi in the sub-panel is not continuously running, but rather runs once every loop lap, not allowing it to run for a time long enough for the control to blink.
If I'm right, make sure the vi in the subpanel runs continuously and start that vi once before going into the calling vi:s loop. Then set the blinking property as you already do now. You will have to read the 'OK led' by property node as well if you need it.
CLA
www.dvel.se

Property node of a control inside of cluster inside an array

I've created a control that has a cluster made of a Boolean, a String and a Numeric. Then in my front panel I've created an array of these custom controls. I would like to have access to the property of the controls inside of the cluster within the array. ie, I want to change the color of the Boolean or make it blink, or "disable and gray" the text box. I think I'm on the right track, or maybe I'm on the wrong path. I've attached and example VI (testtray.vi) and the control that I'm using (UUT_Display.ctl). Please excuse the use of a Flat Sequence Structure, I know it's poor programming practices, but I just wanted to throw something together.
Any help would be appreciated.
kevin
Solved!
Go to Solution.
Attachments:
testTray.vi ‏19 KB
UUT_Display.ctl ‏5 KB

I have enclosed a quick and dirty example of replicating the blinking in an array of clusters. You can turn it on and off, but as we have noted, only for all of the elements. If you were only showing one element of the array you could change properties based on which element was displayed. You probably want to see them all. In that case, you could use a cluster of clusters. This may be a pain, but I would suggest that you use an array of clusters to do your manipulations. Use Array->Cluster to convert to a cluster for display purposes. Then you can manipulate the properties of the cluster.
My guess is easier said than done, good luck.
Attachments:
Blink182.vi ‏98 KB

How can I find the coordinates of individual controls inside a custom control?

I have a custom control that contains 44 smaller custom controls.
I can get the coordinates of the 44 embedded custom controls by getting the controls[] property of the main control, but I cannot find a way of getting the coordinates of the controls inside each of these smaller custom controls.
Is there a way of getting at the coordinates of custom controls that are nested several layers deep?
Erik.

For future reference and for any LabVIEW users who have older versions here are the Front Panel displays before running the VI along with the Wiring Diagram with each of the four cases for handling the various types of ClassIDs that can contain child controls. X1, X@, Y1, and Y2 are the coordinates of the top left and bottom right corners of each control. These coordinates can then be used to determine which control the mouse is pointing at.
In my own project I did further evaluation to eliminate all parent controls (controls that contain other controls) and passed along only the controls that were end-nodes (controls that contain no other controls). Also, the control's refnum was stored for later use.
The bottom picture shows the data gathered during the execution of this VI.
Thanks again, Mike!

Show hidden control inside editor

Hi,
i have following question! I created a user control inside the editor.
It contains a cluster with several controls inside. Each control i can
hide or show. But how can i get back the visibility of the cluster
after i hide it? I didn't found an entry in the menu or anything else...
Could somebody give me a tip?
Thnx
Henrik

> sorry, i think that i explained it not enough.
> What i want to have is a custom control which will show a bitmap when i
> insert it into a vi. Cause the custom control is a cluster with 17
> controls inside, i wanted to hide all controls and the cluster and show
> a bitmap instead. The main reason is to hide the flowing data and to
> reduce the size of the painted element in all this control using vi's.
> The work i have to do in the custom control editor and there is no
> diagram avaible. Later perhaps i have to make changes to the
> cluster...how could i make it visible to change the data?
>
I'm afraid I'm still not sure what is being asked. Here is
my guess. You want to use a strict typedef of a cluster of
17 items. The typedef takes too mu
ch room on your subVI
panels. I'd recommend shrinking the cluster to clip out
the items. This isn't a good idea in general because you
can't see the items, but this seems to be what you are
looking for. Make the cluster be about the size of a
postage stamp and place a graphic or a comment label
inside of it.
When you are ready to show the items again, open the
typedef and grow the cluster again.
If the reason for shrinking the cluster is to minimize
the memory impact, keep in mind that the panels that
contain the controls are not kept in memory on most subVIs,
and in fact, they aren't even compiled into a built executable.
Greg McKaskle

Error while duplicating a panel with control dynamically associated to a splitter

When you try to duplicate a panel where a control has been dynamically created and associated to a splitter, you receive error -153: Item is already attached to splitter control.
See attached project which shows this behaviour: you can move the splitter and have controls moved accordingly; you can also duplicate the panel whith the splitter fully operative. If you press "Duplicate Numeric" button, existing numeric is duplicated and the new control is attached to the splitter. After this, trying to duplicate the panel generates error -153. If you duplicate the control but do not add it to the splitter no error is received while duplicating the panel.
Tested in CVI2009SP1. There is no evidence of this error in Known Issues document for later versions.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?
Attachments:
DplPnl.zip ‏7 KB

Hi Roberto,
Thanks for the nicely stripped down test program! Easy to reproduce bugs are a rare pleasure...
I did confirm the bug, which has been there since CVI 7.1. It is triggered by the presence, at the time that the panel is copied, of a splitter-attached control, which was itself duplicated from another control that had been loaded from a UIR (whether or not the original control is also attached to the splitter). Whew. That was long.
In simpler terms, it's not the fact that the control was dynamically attached to the splitter that is causing the problem. It's the fact that the control was duplicated from another control.
The problem happens because a duplicated control inherits the constant name of the original control. Normally, this is not a problem for runtime-only controls. However, the splitter was still assuming that constant names of its attached controls were all unique, and that's what caused the problem.
Bug id: 392640
Unfortunately, there isn't a great workaround, since you can't prevent the duplicated control from inheriting the constant name, nor can you change its constant name after the fact. I can think of two possibilities:
Don't duplicate the control. Create it using NewCtrl instead, and then apply the necessary configurations.
Temporarily detach the duplicate control from the splitter prior to copying the panel, then attach it back (in both the original panel and the duplicated panel) after the panel copy.
Luis

How can I make a control inside a loop in a subVI change value when the calling VI's control changes?

Hi.
I think this is a pretty basic LV question, but I have not been able to find a good solution.
I am attaching VIs that show the problem I am having, but obviously, the real application is a lot complicated, which forces me to try to do it this way.
The issue is: I have a subVI with a Boolean control inside a loop. When the control is true I want some action to take place. When the subVI is run on its own, it works fine, acting properly when I set the boolean control to true via the LV FPGA interface from the host. However, when I use it as a subVI, in which the top-level VI calls several instances of the subVI, I have the Boolean controls in the top level VI. What is happening is that the false Boolean value with which the top-level VI starts is passed into the subVIs, and not updated, even though the control is inside the loop.
Can any one suggest a good solution?
Thanks,
AlejandroZ
Attachments:
CallingVI.vi ‏7 KB
subVI.vi ‏8 KB

Hi.
I know the example I posted might seem silly, but it was just to illustrate the problem I am having. In reality this is the application:
I have some LV FPGA code which uses a few FPGA IO to implement a serial link to communicate with a device. Most of the time we are getting data from the device, so the serial link is used to send a read command, read in the data and put it into a FIFO. However, I also wanted the VI to support sending data to the device, so I added an array control to put the data you want to send, and a boolean control to tell it you want to send it.
Since sending and receiving data are done using the same FPGA IO, they cannot be independent operations, because they would garble each other. Therefore, in the subVI I have a loop in which I first read data if there is any to read, then check the boolean write control to see if there is data to write.
As I mentioned, this works perfectly for talking to a single device. However, we run into the issue of this topic when trying to replicate this for several devices.
One easy solution is to not have the loop in the subVI, and have it in the calling VI (I am favoring this simple solution right now). The only reason why I have not done this yet, is that the subVI has more than one loop, so I am going to have to create several subVIs. I just posted to see if there was an even simpler solution...
There have been some other possibly good solutions proposed here, though I am not sure if they work in LV FPGA.
Thanks for all your responses.
AlejandroZ

How can I use the button in one panel to control the other panel's appearing and disappearing?

How can I use the button in one panel to control the other panel's
appearing and disappearing? What I want is when I push the button on
one button . another panel appears to display something and when I
push it again, that the second panel disappears.

> How can I use the button in one panel to control the other panel's
> appearing and disappearing? What I want is when I push the button on
> one button . another panel appears to display something and when I
> push it again, that the second panel disappears.
>
You want to use a combination of three features, a button on the panel,
code to notice value changes using either polling in a state machine of
some sort or an event structure, and a VI Server property node to set
the Visible property of the VI being opened and closed.
The button exists on the controlling panel. The code to notice value
changes is probably on the controlling panel's diagram, and this diagram
sets the Visible property node of a VI class property node to FALSE or
TRUE to show or
hide the panel. To get the VI reference to wire to the
property node, you probably want to use the Open VI Reference node with
the VI name.
Greg McKaskle

051 routine between sales order and delivery copy control

Hi,
The copy control routine 051 in copy control from sales order to delivery defines four combination criteria.
1) delivery types same in config of sales doc type
2) sales org same of the sales orders
3) delivery indicator same
4) billing type same as defined in sales doc type.
my question is if i have the follwoing copy control defined between sales order and delivery :-
sales       del           sales       deliv         bill      routine
order        type         org        agreement       type     in copy ctrl
type
ZOR          ZLF          1000         SAME          ZF2         051
ZTSD          ZLF          1000         SAME          ZF2         051
my question is how will the routine combine all the sales doc type into a single delivery. my confusion is since the rotuine is attached to every combination of sales doc type and delivery type in copy control, how will the routine identify that it has to combine the sales doc type ZOR and ZSTD into a single delivery.
one of the statements wriiten in routine 051 is that " check sales org is same for all document ". does this mean that the routine will identify sales orders with doc type ZOR only if the routine is attached in config for copy contol between zor and zlf and i remove the routine for copy control belwteen zstd and zlf.
regards
sachin

Sales order is the order from your customer and delivery is when you are delivering the item.
Shipping: In general when the item is dispached from the warehouse, we can say the item is shipped,where as delivery is item/product reaching to the end customer.
Hope it helps,
Kiran

Usage of Apache Beehive JMS control inside Message Driven Bean

Hi,
I am developing a j2ee application using weblogic workshop 10.3. This application contains the following three projects.
- J2EE Utility Project
- Message Driven Bean Project
- Ear Project
In the Utility project I have created one apache beehive jms control. I am using this control inside the message driven bean application. I haven't got any issues during the development and deployment phase with the beehive control. But during runtime the apache beehive jms control is not getting instantiated and the mdb application is throwing the null pointer exception when the EJB container try to execute the methods on the control instance. I have used the declarative programming model to create the control instance inside the mdb application.
I am using the weblogic 10.3 server for testing and I have created the 10.3 weblogic+workshop domain. By default it has the beehive libraries deployed.
Can somebody help me out to resolve this issue?
Regards,
Bp

You can get the message directly with getText() method. Following is the snippet of code.
if (aMsg instanceof TextMessage) {
TextMessage msg = (TextMessage) aMsg;
String testMessage = msg.getText());
Kishore.

Generating events from a control inside an array of clusters

Hi, I have a question regarding UI events. I would like to capture a mouse down event generated in a string control inside of an array. Each element of the array is a cluster that has a Boolean control, a numeric control and a string control. When I try to add an event to handle the mouse down the only option available in the event structure is the one available for the entire array. If this is not possible to map event from the individual controls inside of the each cluster that are part of the array, could you provide with an alternate way of "knowing" when the string control is selected. The application has a touch screen without a keyboard and mouse. I need to display the touch screen graphic keyboard when the textbox is selected.
Thanks,
Diego F.

I'm not sure, but I think your only option may be to do some calculations. The mouse down on the array will give the coordinates of the click in VI coords. You can get the coords and size of the cluster and the coords and size of the string using their property nodes. Then, you have to calculate whether the click was on one of the visible strings using addition, subtraction and quotients. Once you make a subVI out of this, it should be easy to use.
You should watch out for the index display and the label, as they change the values of the coords. I'm sorry, I can't think of any easier way to do this.
Correction - I just thought of one. If you use the KeyFocus property on the string inside the mouse down event, it seems to work. I'm not sure whether this will work when bringing the keyboard to the front, which is why I left the other suggestion in place. Here's my test (7.0)
Try to take over the world!
Attachments:
key1.vi ‏29 KB

TABbing between controls inside a panel to controls outside a Panel

Similar Messages

Maybe you are looking for