Table contents goes out of view

I have a table that is 5 x 5. I have turned off selection scrolling so the table will not move. When I go to the 5th row and hit enter, the table advances so that I can no longer see my first row. Since I don't have scrollbars, I can't get back to row 1. How do I lock down so it can't do this (I am using 6.1)

Similar to your other problem with the right-click, you can use a filter event that ignores pressing of the "Enter" key inside the table. The attached example does both.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
DisableRightClickandEnter.vi ‏30 KB

Similar Messages

Why is Spry Tabs dropping below content out of view and back during page load.

Hello everyone, I'm having some
Spry Trouble. This is happening only in IE 7.
When the page loads, you'll notice that the tabs will
collapse before coming back to it's designated position.
This ruins the visual appeal. Again I don't know why this
happens but the tabs at the bottom of the content will quickly drop
below out of view and then jump back under the content.
Here is the URL
http://www.patrickjudson.com/weddingIndex2.php
Any ideas why this is happening?
Thanks everyone - Patrick

quote:
Originally posted by:
Newsgroup User
Webethics wrote:
> Hello everyone, I'm having some
Spry Trouble. This is happening only in
> IE 7.
> When the page loads, you'll notice that the tabs will
collapse before coming
> back to it's designated position.
> This ruins the visual appeal. Again I don't know why
this happens but the tabs
> at the bottom of the content will quickly drop below out
of view and then jump
> back under the content.
>
> Here is the URL
http://www.patrickjudson.com/weddingIndex2.php
I don't see the collapse issue on my end. About the only
visual thing going on is that the background image of the tabs
appears later than the text, but not sure that's an issue that's
particular to the Spry code on the page.
Perhaps it's related, or perhaps not, but in my IE7, I get an
error on the page. It states:
Line: 48
Char: 3
Error: Object required
Code: 0
URL:
http://www.patrickjudson.com/weddingIndex2.php
I only see HTML code at line 48 both in the source code, and
even if I pull the generated content view source from Firefox. I
checked line 48 of both of your attached JS files and neither
seemed to be an obvious issue. I even saved a local copy of the
page, and didn't get an error at all. The line of code in the HTML
does seem to be the end of the div that contains your music player,
maybe it's causing an issue in IE, not sure.
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert
So why is there an error in IE7 saying object required.
What does this mean, and what are the side effects?
Any idea?
Patrick

DYNAMIC CHANGE OF TABLE CONTENTS IN WEBDYNPRO VIEW

Hi,
I have a requirement to display a table contents, and there are two buttons, When i select some records and clk on a button i need to delete these records in the database table as well as in webdynpro view.
I am able to delete the records in database but the contents of table in view of webdynpro remains unchanged. Can anyone tell me how to delete the contents in the view also??
Regards
Naveen

Hi Naveen,
You need to Refresh the data you are binding to the table to make the latest data
visible on the screen.
On action of the button you are deleting entries from the database. After this
Fetch data again from the database and bind to the node of the table.
Hope this solves your problem..
Regards,
Ismail.

When a photo is viewed in iPhoto 9.6, why is it sharp then immediately goes out of focus?

When viewing photos (full window), the photo initially is sharp then immediately goes a little out of focus. Thanks to some previous forum responses, a fix is to slightly shift the zoom button to the right, clearing the photo right up. When going through 100+ photos, obviously this is an untenable fix. I assume this is a bug that needs repair.

As a follow-up, I found that if I hold the left mouse button down while on the zoom button, no matter where it is on the slider, the same effect happens, that is that the photo goes out of focus. Once released, the photo sharpens. This DOES NOT happen when the zoom slider is all the way to the left. There as stated earlier the photo stays out of focus.

How to generate a report from crm table to find out user status changes

Dear all,
Could you please help me on generating a report from SAP CRM table level
to find out user status changes in crm orders for a specific period of time?
Thanks in advance,
Regards,
Shaik

Hi Shaik.
You would not need to write report for this. You need to create a Table view mainenance for the CRMD_ORDERADM_H or CRMD_ORDERADM_I for whichever you need.
Follow the below or search on google for more on table view maintenance.
Go to SE11, give the table name and click on change. Then Go to utilities--> Table maintenance generator.
In the table maintenance generator screen, you should give Authorization Group,
Function Group name (Function Group name can be same as table name),
Maintenance type can be one step or two step, usually you will create with one
step. You should give maintenance screen number. After clicking on create button,
a table maintenance generator will be created.
To check it go to SM30 . In SM30, you find display, Maintain options.
You can view the table contents by choosing Display and supplying the selection criteria of dates.
Regards
Apoorva

What causes areas to be grayed out when viewing in Acrobat 9?

What causes text to be grayed out when viewing in Acrobat 9?
Douments which were fine in Acrobat 9 suddenly have areas blacked or grayed out. The same thing happens if opened in Acrobet Reader. Is there a setting that causes this.

It could be that the text is an image.
Try going to Edit>Preferences>Page display>Page content and information and check the box hat says "Display large images".

Implementing Outer join Views in creating Generic datasource

Guys,
Iam bringing the Purchase document level data from R/3 into BW.I have couple
of other Ztables also from which i need to collect the information.So iam going to create a generic datasource based on the view.
In case of Database view it is taking inner join, which is undesirable since the
final data coming out of view will be reduced as we join the main base tables with ztables..Since Ztables may have very less data.And inner join gives complete information only if all tables contain the information given out in the view output.
One option is to use maintainance view which uses outer join. Is it recommendable
to use maintainance view in case of basing the Generic datasources on the view.
Please inform me if any of you have done generic datasources using database view.Any idea in this regard is welcome.

Hi,
I think you may have to develop your Generic Datasorce with "Function Module" since there is no common field.
Regards,
Suman

How to zoom out and view an entire track in the window

There's got to be a way to zoom out so an entire track can viewed at once so that segments of the track can be shifted around. I have a track that is about 50 minutes long with several segments in it. I want to shift the segments around. Right now I can only view about a minute of the track at a time and have to click on the segment then move the cursor either left or right and wait for Garageband to scroll to the time where I want to put it. Isn't there a way to just zoom out and view the entire track and then shift segments around without all the scrolling? Does that make sense?

Christoph Drösser wrote:
Hm ... mine zooms out to more than an hour?
interesting!
I opened GB4 and it maxed out at 4 minutes. then i opened GB6 and it maxed out at 15 minutes. then i opened another project in GB 6 and it maxed out at 35 minutes.
so there must be something else going on here, perhaps like how time sigs affected length in the older versions?

All "Site Content and Structure" default views incorrectly showing "There are no items to show in this view"

Hi All,
On my SharePoint Online site (Office 365) all my “Site Content and Structure” default views are showing “There are no items to show in this view”. For example the “Checked out To Me” view shows “There are no items to show in this view” (shown in screenshot
below). I know this is incorrect and should show at least ten items that have been checked out to me for over two months. I am also a member of the Site Collection Administration and Owner groups.
What I am trying to do is view all the "Checked Out items" within a Site Collection including it's sub-sites.
Is there a feature that needs to be activated to get the correct information from the “Site Content and Structure” default views?
I hope you can help
Colin

Hi Colin,
As I understand, all “Site Content and Structure” default views are showing “There are no items to show in this view” in your SharePoint online site.
Check things below:
1. Go to site content and structure logs in site setting to check if there is correct information.
2. Create a new site collection to check if there are items in Site Content and Structure.
3. Switch another computer to check if it can work.
If the issue still exists, I recommend you to post it in the O365 forum.
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Problem in creating 800 client to see table content .

HI,
    I am new to sap . I have ideas 4.7 in windows 2003. i can see table content under user sap* and password 060719* . I have created a user sapuser . through client 000 , i can create create abap program , but could not find ant table content like mara . at first time after creating sapuser , it asked me the access key. i gave 36687663221261278694 and it has taken . but to see table content , i created a new user as partha in client 800. but at first time at the time of logging it is asking the access key. though i am giving same key it is not taking .
   1) is there any other key for that educational version ?
   2) how to crreate a user in client 800 . pls give step by step procedure .
   3) for creating a user under client 800 . should i delete my sapuser created under 000 client.

Hi Jack,
First of all, the client 000 is one of the standard clients that comes with any SAP R/3 installation (with client 001 and 066 (for EarlyWatch for SAP auditory purposes)). To work with the system you should always make a copy of the client 000 or 001 to a new client i.e. client 200, 400, or whatever name.
In the case of IDES, the system always comes with the client 800, where you can find all the IDES configuration and data (for test, training, sandbox). If you want to work in the system you should work on this client (800). To check the tables you can always use transaction se12 (table structure: fields, keys) and se16 to see the table content. If you want to create users you should always do it in the client 800 or any other client you've created (not in the standard ones 000, 001, 066, try to maintain these clients clean of any custom data).
To view the tables data you dont need any key. The keys are requested when you want to register a developer user (to create a new abap program (all the new programs must start with Z (or X,Y) to differentiate from the standard SAP programs. The keys are also requested when you want to edit a standard program or table or any other standard SAP object.
1) To get the keys for any SAP system (there are 2 types of keys: developer user and for editing any standard object) you must log on the OSS service (with the user and password provided by SAP when you got your SAP software) : service.sap.com/sscr. Here you use the installation number of your IDES system (the system must be registered in OSS) and then you can create your developer users or standard object keys.
2)To create a user in any system you need to go to transaction SU01. Here you can make a copy of SAP* user for example (choosing in the trx the button copy) to create your new user. you assign a password to the user and save it. You need to login again on the system and put your new password. This is the easiest way, otherwise you can create a user from zero but you will need to add more information to the user. To start you can create a copy of SAP* or DDIC users.
3) Yes, I suggest you delete the user you've created in client 000, try to keep it clean of any customer modifications (you could leave it there but is not a good practice).If you want to work with your IDES system and the IDES data, use the client 800.
Good luck,

How to print table contents?

hi @,
I am having a view which is dsiplaying data fetched from the R/3 through Adaptive RFC in a table. This table need to have a print functionality to print on the client.
How to do this I am not having any function / UI to do this.
Any help.
Regards

Hi,
Try This:
When the user click on Print button, launch a new window as below:
public void onActionPrint(com.sap.xyz.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionPrint(ServerEvent)
          StringBuffer strB = new StringBuffer("/webdynpro/dispatcher/xyz.com/(component name space) ab~xyz~testprint/(application name)PrintTestApp");
          IWDWindow window = wdComponentAPI.getWindowManager().createNonModalExternalWindow(strB.toString(), "Print");
          window.show();
    //@@end
The above code helps to launch a new window with your Web Dynpro application. The application is sepecific to print functionality.
ThePrintTest App should have the content with format what exactly you would like to print. (Users use the browser standard print functionality to print the table content).
This is a kind of work around and as of NW 7.0 there is no standard print functionality available in Web Dynpro.
Thanks
Krishna

How to get content item out of work flow automatically

hi experts,
my requirement is that Contributor will contribute the Content , and provide the content publish Date.
When contributor contribute content, content goes in workflow. I want auto approval of workflow so that when Publish Date actually comes, Content is out of workflow and published on site.
Is there any way to achieve this ??
Or is there any way that when publish date comes, meta-data of the content item changed....?
Thanks

try putting your date comparitor and wfExit() code in the update event of the step the content item is in.
You may need to wait up to an hour after the time/date elapses before the comparitor evaluates to true and kicks content out of the workflow.
However, you should really evaluate the reason you're using workflow in the first place. It looks like you're using it as a holding ground.
I recommend using the dReleaseDate field to prevent the item from being indexed and released to the search results.
Then use subscriptions (e.g. push subscriptions) to handle the notification.
If you need more advanced subscription and notification capability take a look at our Subscription Notifier product: http://bit.ly/ENRwq
Hope this helps
Warmly,
Billy Cripe
Fishbowl Solutions

Read SAP table content through VBA why Chinese characters display as '#'

Hi ,
I meet a problem . I want to get sap table content through RFC in excel VBA. now i have solve it . It can got table content . when i change a new system , it can get table content ,but chinese characters display as '#' ( it works well in sap 4.6c Chinese characters can display , when upgrate to ecc 6.0 it can't works well )
some VBA code as below :
Set ofun = CreateObject("SAP.FUNCTIONS") ' create a FUNCTION object
   ' Connect has create and conneted to SAP system
Set ofun.Connection = Connect                     ' "connect"has create connetion sucess
Set func = ofun.Add("RFC_READ_TABLE")    ' set RFC object to call function
    func.Exports("QUERY_TABLE") = "T179T"   ' set table name for get table content
    func.Tables("OPTIONS").DATA = "SPRAS   =   'ZH'"    ' set condition of language of 'ZH'
If func.Call = True Then
        Set oline = func.Tables.Item("DATA")       ' set table content which get from table T179T to object "oline"
endif
who can give me some suggestion about this ? Thanks .
Edited by: Chris Xu on Oct 31, 2008 6:51 AM

Hi Chirs,
I am facing the same problem but i am using c sharp and this is a windows application.
I tried to change the CodePage attribute by simply setting connection.codepage = "8040";
But i get an exception.
attempted to read or write protected memory.
I cant seem to change this. What should i do. Also do we have to set this at the point of connecting to the Sap system or when i'm calling the RFC. I tried both instances but none worked. Could you please help me out.
i am using VS 2008.
Thanks,
Yohan

Issues with finder going out of sync with file images in cover flow.

Hi All,
I'm having issues with files going out of sync with images in cover flow since updating to Mavericks. Typically, if I had for example 10 pictures listed as 1 to 10, if i deleted images 6&7 the images remain in coverflow but the file listings are removed, then if i click on image 7 the file listing of image 8 is highlighted, then to make matters worse, if i click on the file listing for image 9 in shows image 8 in cover flow. To stop this I have to shut down finder and restart it, then the whole thing repeats itself if i delete more images. Its a nightmare when your working with 50 plus images at a time!!! Help!!
Thanks all.

com.apple.systemuiserver.plist and com.apple.finder.plist
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Preferences/. Move the .plists to your desktop.
Re-launch Finder by loggin out/in and test. If it works okay, delete the plist from the desktop.
If the same, return the .plist to where you got it from, overwriting the newer ones.
Thanks to leonie for some information contained in this.
You might need to redo the View settings after an update.
If you look at the 'More Like This' box (top right) it seems the Cover Flow view is having problems.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

MS - contention with empty materialized view on demand - 10.2.0.4

Could somebody explain what is MS - contention? I've searched everywhere and got just that it is used to setup materialized view log. I need more deeper explanation. Why is it needed? And the main thing - I have this materialized view:
CREATE MATERIALIZED VIEW "CLIENT_MV"
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
BUILD IMMEDIATE
USING INDEX
REFRESH FAST ON DEMAND
WITH PRIMARY KEY USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE
AS SELECT CLIENT_ID FROM CLIENT WHERE 1=0
And mlog on it. What activity can cause MS-contention on it? I tried concurrent updates on a master table, refreshed it at the same time, but can't get contention. May be it is important that I saw this contention in v$active_history view
Edited by: user6895786 on 26.02.2010 6:11

user626582 wrote:
Hi all
I have trouble on a 10.2.0.4. All Users have lost their Passwords, that means that the column password in the view dba_users is empty an Users can't login anymore.
I didn't found a logfile or something else. Have you got an idea ? Profiles eg ?
Thanks for your help.What is the error that the users are getting, invalid user name and password, is it? Did you do any recent patching of your system/db? I would suggest that you raise an SR with oracle as it would highly descreuctive to play with base tables on your own.
HTH
Aman....

Table contents goes out of view

Similar Messages

Maybe you are looking for