Table created in visual studio not shown in portal
i created a table in vs2013 for my azure sql database.
the update completed successfully so the new table must be up there somewhere,
but when i go to the portal, it is not shown.
why?
Hi,
Based on your description, you have seen the database update has been completed successfully from data tool operations, as far as I know, it means that your azure sql database has been updated, and the table you created must exist in azure portal,
I tried on my side, everything worked as except, please check your azure sql connection, and clean cookies and sessions, then open azure sql management portal again.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Similar Messages
-
Azure Webjob created in Visual Studio 2015 fails to run
An Azure Webjob created in Visual Studio 2015 (any job, including the sample project) fails to run in an azure website with the following error:
Job failed due to exit code -2146232576
Note: the same project created in Visual Studio 2013 deploys and runs successfully.
How can I fix the project in VS2015?Not the OP but I've the same problem.
I created a continuously running webjob with the following code. The job runs perfectly fine locally.
Program.cs
static void Main()
var host = new JobHost();// config);
host.RunAndBlock();
Functions.cs
public static void ProcessQueueMessage([QueueTrigger("queue")] string message, TextWriter log)
log.WriteLine(@"triggered job TriggeredWebJob");
Here's the log from Azure WebJob:
[03/16/2015 16:07:33 > 28695a: SYS INFO] Status changed to Starting
[03/16/2015 16:07:34 > 9cb303: SYS INFO] Status changed to Starting
[03/16/2015 16:07:34 > 28695a: SYS INFO] Run script 'TriggeredWebJob.exe' with script host - 'WindowsScriptHost'
[03/16/2015 16:07:34 > 28695a: SYS INFO] Status changed to Running
[03/16/2015 16:07:35 > 28695a: SYS ERR ] Job failed due to exit code -2146232576
[03/16/2015 16:07:35 > 28695a: SYS INFO] Process went down, waiting for 60 seconds
[03/16/2015 16:07:35 > 28695a: SYS INFO] Status changed to PendingRestart -
PLS-00923: native compilation failed: Visual Studio not
hi,
I'm using oracle 10g version 10.2.0.1 running on windows xp pro service pack 3. I'm trying to switch from interpreted to native compilation, and here are the parameters I've set:
plsql_native_library_dir = D:\oracle\product\10.2.0\db_1\plsql
plsql_code_type = NATIVE
plsql_native_library_subdir_count = 0
plsql_compiler_flags = NATIVE, NON_DEBUG
Now I'm trying to run the following statements:
ALTER SESSION SET plsql_code_type = 'NATIVE';
CREATE OR REPLACE PROCEDURE test_speed AS
v_number NUMBER;
BEGIN
FOR i IN 1 .. 1000000 LOOP
v_number := i / 1000;
END LOOP;
END;
SET TIMING ON
SQL> EXEC test_speed;
BEGIN test_speed; END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00905: object SYS.TEST_SPEED is invalid
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Elapsed: 00:00:00.03
SQL> show err
Errors for PROCEDURE TEST_SPEED:
LINE/COL ERROR
0/0 PLS-00923: native compilation failed: Visual Studio not
found::Could not open registry key
HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\VISUALSTUDIO\7.1\SETUP:No
error
I have search for the error in google but I can't find anything useful. What do I need to set-up/change to achieve my goals.
Thanks and God bless,
Chrishi,
I'm using oracle 10g version 10.2.0.1 running on windows xp pro service pack 3. I'm trying to switch from interpreted to native compilation, and here are the parameters I've set:
plsql_native_library_dir = D:\oracle\product\10.2.0\db_1\plsql
plsql_code_type = NATIVE
plsql_native_library_subdir_count = 0
plsql_compiler_flags = NATIVE, NON_DEBUG
Now I'm trying to run the following statements:
ALTER SESSION SET plsql_code_type = 'NATIVE';
CREATE OR REPLACE PROCEDURE test_speed AS
v_number NUMBER;
BEGIN
FOR i IN 1 .. 1000000 LOOP
v_number := i / 1000;
END LOOP;
END;
SET TIMING ON
SQL> EXEC test_speed;
BEGIN test_speed; END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00905: object SYS.TEST_SPEED is invalid
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Elapsed: 00:00:00.03
SQL> show err
Errors for PROCEDURE TEST_SPEED:
LINE/COL ERROR
0/0 PLS-00923: native compilation failed: Visual Studio not
found::Could not open registry key
HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\VISUALSTUDIO\7.1\SETUP:No
error
I have search for the error in google but I can't find anything useful. What do I need to set-up/change to achieve my goals.
Thanks and God bless,
Chris -
C# Getting path of folder that is created in Visual Studio and it's located in app directory.
Alright i created folder that will contain video resources for my app.But now i need to connect it with my code.I need to get file path of folder that i created in Visual Studio,but it needs to work on other machines.I tryed Path.Combined(Environment.GetCurrentDirectory
+ @"Video\Lekcija1.mp4") but it didn't work.Any suggestions?If you set the Build Action of the Lekcija1.mp4 file to Content (right-click on the file in the Solution Explorer in Visual Studio) and the Copy To Output Directory property to Copy always or Copy if newer you could use the following code to get the absolute
path to the file:
string codeBase = System.Reflection.Assembly.GetExecutingAssembly().CodeBase;
string fullPath = System.IO.Path.GetDirectoryName(codeBase) + "\\Video\\Lekcija1.mp4";
Hope that helps.
Please remember to mark helpful posts as answer to close your threads and please start a new thread if you have a new question. -
BI Administrator cockpit queries not shown in portal
Hi All,
We have a same problem as mentioned in thread BI Administration Cockpit - Queries not shown in portal but i didn't understand the solution.can somebody tell me the solution
Thanks
Bala DuvvuriNote 972514 resolved the issue
Thanks
Bala Duvvuri -
I am fairly new to this whole process of working with the Microsoft development environment. Here is what I have to work with:
an NT server running Microsoft SQL 2012 - Microsoft SQL Server Standard (64-bit) 11.0.2100.60
and on my laptop (all freebie downloads):
SQL Server Management Studio 2012 ver 11.0.2100.60
Visual Studio 2012 Express for Desktop Development and
Visual Studio 2012 Shell (Integrated)
I was able to create an SSIS package in
2012 Shell (Integrated). It takes a flat file and imports it into an SQL database table. It runs successfully from within the
2012 Shell (Integrated) envrionment.
But I am having trouble figuring out how to set this up on the 2012 SQL Server. I see that one of my colleagues created an Integration Services Catalog,
and using SQL Management Studio I was able to create a folder under that called DigLic. But when I go to the Projects subfolder of DigLic and attempt to import my SSIS package, I get an error message:
"To launch the Integration Services Deployment wizard, one of the components: Integration Services, Management Tools - Basic or Business Intelligence Development Studio has to be installed by the SQL Server
2012 Standard, Enterprise, Developer, or Evaluation Edition. To install a component, run SQL Server Setup and Select the component name"
I realize that Express Versions of Visual Studio lack the full feature set of a professional version. But am I wrong in assuming that owning a server version of SQL Server 2012 gives us license to a professional
version of SQL Management Studio 2012? If so, how would I go about getting this software component installed? And I am not clear if this is something that needs to be installed on our SQL Server or if I simply need a professional version of SSMS
loaded on my laptop.
I work for a company that is fairly fractured in its repsonsibilities, so I would need to know exactly what to ask for if I need to track down any licenses that I might need and if I need to have any specific software installed on our SQL server or on my
laptop.
All helpt would be greatly appreciated.
Thanks!Arthur,
Thank you for your reply. But at this point, one of my points of confusion is what software I have available to me. I wish I had a useful central help desk to call up and just say, "Hey, load me up with all of the professional version(s) of Visual
Studio. But I do not know what we have license to. And I kind of need to know what the options are, so that I can ask a specific question of our vast buracracy.
For now, I have downloaded only free versions of Visual Studio client software. Since my company does have servers running Microsoft SQL Server, I am going to assume that we have proper licensing for those servers. But does that server license
allow me to get any professional versions of the PC client software for the various Visual Studio(s) 2012?
And if I get a professional version of Visual Studio 2012, does that do away with the three different flavors that I have right now? I have 2012 versions of SQL Server Management Studio, Visual Studio Express, and Visual Studio Shell (Integrated).
Your feedback is much appreciated.
Thanks! -
Visual Studio not working with OneDrive
I'm having a problem with Visual Studio 2013. I am working entirely out of my 'OneDrive for Business' directory on my computer. When I work with a project that is located in that directory, I constantly receive the error: "This project has been modified
outside of Visual Studio and needs to be reloaded."
I will be typing away in the code editor, or doing other things inside Visual Studio and that error message pops up. Sometimes every few seconds and there is nothing I can do to stop it from appearing. I am unable to accomplish anything because I constantly
have to stop and click the button to reload the project.
I am the only person using my OneDrive as this is a personal business. No one is accessing my files from another computer. I've also changed my password for OneDrive to ensure I was the only person accessing the files.
I'm trying to figure out why I keep receiving this error message from Visual Studio and how I can get it to stop, so I can get back to working on my projects.
I have all of the Microsoft Office programs, and work with Word 2013, Excel 2013, PowerPoint 2013, and Access 2013 on a daily basis. All of which are located in my 'OneDrive for Business' directory. None of these applications give me an error. It only happens
with Visual Studio 2013.Hi Kensino,
It seems that I said too early. Currently I got the same issue with you at random times even though I just clicked on Visual Studio Code Editor. This is an issue which needs to be researched. I did not find any ways to resolve this issue,
would you please create a connect report for it to get the issue confirmed and diagnose by Microsoft product team?http://connect.microsoft.com/VisualStudio/feedback/CreateFeedback.aspx.
If you submit it, you will get email notification for update. After submitting it, you could share us the link here, so we could know the latest information from the Product team expert.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
MySQL 5.5, Crystal Report for Visual Studio not working when hosted IIS
Software and Component detail
Microsoft visual studio 2010
MS .NET Framework
Version 4.0.30319 RTMRel
MYSQL SERVER Database
Version 5.5
MySQL Connector 6.6.4 64 Bit
MySQL ODBC Driver Version 5.2.a
Crystal Report for Visusl Studio 64 Bit 13.0.5
(CRforVS_redist_install_64bit_13_0_5)
Current Setup
1. I have WebSite in ASP.NET Visual Basic which works fine and is connected to MySQL Database, using MySQl Connector 6.6.4 64 bit
and is using a connection string,defined in web.confg.
2. I am using a Crystal report( It is very complex report, so cannot dare to redo it). Data Source for the report is set using a connection string
DRIVER={MySQL ODBC 5.2a Driver};SERVER=Licensedb;DATABASE=License;pwd=root;PORT=3306;OPTION=3 and this report is called from website using the below code
Dim crystalReport As ReportDocument = New ReportDocument()
Dim repPath As String = Server.MapPath("~/Reports/") + "LicenseReport.rpt"
crystalReport.Load(repPath)
CrystalReportViewer1.ReportSource = crystalReport
crystalReport.SetParameterValue("InstanceID", CInt(Session("sessionInstanceID")))
crystalReport.Refresh()
crystalReport.SetParameterValue("InstanceID", CInt(Session("sessionInstanceID")))
CrystalReportViewer1.Visible = True
3. The above setup works fine, when I run the website from Visual studio 2010. But when i use IIS 7, the aspx page having crystal report viewer control load and its blank.
However it work very well from studio it self.
4. So I changed the setup in point 2, by having a ODBC Data source defined. And changed the report accordingly. It work fine in Visual studio , but from IIS
it gives error "Failed to Open Connection, Failed to Open Connection <Crystal Report File name.rpt>"
5. I tried creating a System DSN and same connection string in IIS Application Connection string. But nothing changed.
Please can anyone point in correct direction. I must admit this is my first website development work, so I might have overlooked some minor details.
Any help would be much appreciated.
Thanks
Dilpreet ([email protected])hello again. I fear that what is said in that article does not apply to my particular case.
First of all i am using the Crystal Report Basic 2008, which I think is not the same product as Crystal Reports 2008.
In addition, printing fails always, on my PC and on the web server.
On the other hand I can not find anywhere printcontrol.cab file or printcontrol.dll, just do not exist either in my PC or on the web server.
The folder where the report viewer is located is not CrystalReportViewers12, is CrystalReportWebFormViewer4, and is located at wwwroot\aspnet_client\system_web\2_0_50727\
Investigating I found something, but has not helped me:
[http://social.msdn.microsoft.com/forums/en-US/vscrystalreports/thread/0af08d25-dd71-41ce-92fa-ca374f933eaa/]
This problem is what always happens to me when on my local PC I access my web server by its public IP.
I think I must resign myself to use only the PDF print
thanks anyway -
Hi,
I am creating a Project Server Workflow (site workflow) using Visual Studio 2012.
If i set the "EnterProjectStage" activity with a GUID within quotes the workflow works
(as suggested in the MSDN blog (http://blogs.msdn.com/b/project_programmability/archive/2012/11/07/creating-project-workflows-using-visual-studio-2012.aspx).
However, the GUID of stages will change from environment to environmet (QA, Stage, PROD). So, I tried setting the GUID in a string variable (which i am populating dynamically) and assigned the string variable to the "EnterProjectStage"
activity. However, this dynamic assignment of stage id to "EnterProjectStage" does not work and after deployment the workflow dumps with the following error:
===============================================
Exception Starting Workflow: Sequence contains no elements. Trace: at System.Linq.Enumerable.First[TSource](IEnumerable`1 source) at Microsoft.Office.Project.Server.BusinessLayer.Workflow.<FillWorkflowStatusTableFromXaml>b__47(XElement
e) at System.Linq.Enumerable.WhereSelectEnumerableIterator`2.MoveNext() at System.Linq.Enumerable.<DistinctIterator>d__81`1.MoveNext() at System.Collections.Generic.List`1..ctor(IEnumerable`1 collection) at System.Linq.Enumerable.ToList[TSource](IEnumerable`1
source) at Microsoft.Office.Project.Server.BusinessLayer.Workflow.FillWorkflowStatusTableFromXaml(String xaml, WorkflowDataSet& ds, Guid projUid) at Microsoft.Office.Project.Server.BusinessLayer.Workflow.StartWorkflow(Guid projectGuid, Guid enterpriseProjectTypeUid,
Boolean isNewProject, Guid previousEntepriseProjectTypeUid, Boolean skipStage, Guid stageToSkipTo):
WorkflowExceptionStartingWorkflow (35115). Details: id='35115' name='WorkflowExceptionStartingWorkflow'
uid='b31d825e-1d00-e411-9466-005056b11412'.
===============================================
Is there a way the "EnterProjectStage" can be made dynamic so that it reads from a variable.
Thanks,
Amitava.Arthur,
Thank you for your reply. But at this point, one of my points of confusion is what software I have available to me. I wish I had a useful central help desk to call up and just say, "Hey, load me up with all of the professional version(s) of Visual
Studio. But I do not know what we have license to. And I kind of need to know what the options are, so that I can ask a specific question of our vast buracracy.
For now, I have downloaded only free versions of Visual Studio client software. Since my company does have servers running Microsoft SQL Server, I am going to assume that we have proper licensing for those servers. But does that server license
allow me to get any professional versions of the PC client software for the various Visual Studio(s) 2012?
And if I get a professional version of Visual Studio 2012, does that do away with the three different flavors that I have right now? I have 2012 versions of SQL Server Management Studio, Visual Studio Express, and Visual Studio Shell (Integrated).
Your feedback is much appreciated.
Thanks! -
Cannot edit form in InfoPath when list was created in Visual Studio
I am using SharePoint 2013 Enterprise, InfoPath Designer 2013 and Visual Studio 2013.
When I create a list using the SharePoint UI, I can use the "Customize Form" button on the "Customize List" ribbon to customize the list form in InfoPath Designer and publishing the changes works just fine.
When I create the same list in Visual Studio and deploy it via a solution package, I can still use the "Customize Form" button to customize the list's form in InfoPath Designer, but publishing the changes won't work. The error message I receive
reads:
The publish operation could not be completed. It cannot be determined if the form template was successfully published. Try publishing the form template again, or change the list settings to
Catastrophic failure
How can I solve this problem?
Thanks in Advance!Hi Eduardo, this sounds like a data connection or SOAP issue. Check out the following links for solutions similar to your problem:
https://social.technet.microsoft.com/Forums/office/en-US/ea8da113-fe9a-4878-9994-c1f24cc85c37/soap-error-when-publishing-infopath-form-to-sharepoint?forum=sharepointcustomizationprevious
https://brenthafnersblog.wordpress.com/tag/infopath/
cameron rautmann -
Can't see table data from Visual Studio Express 2013 for Web
Hello!
I have a problem and I can't see neither the table data nor the table definition for my database inside Visual Studio Express 2013 for Web, Server Explorer. When I right click it just says refresh, copy or properies.
Does anyone know what's wrong?
Thanks a lot!Hi J1m,
According to your description, I make a test on my computer and I am able to reproduce your issue. Firstly, I install the Visual Studio 2013 express for web successfully, create a project and connect to SQL Server database. Then I right click one table,
and I can see all the options including ‘Show Table Data ’, ‘Open Table Definition ’, ‘Copy’, ‘Refresh’, and ‘Properties’. Next, I uninstall the SQL Server data tools, and restart the Visual Studio, right click on table, and only find the three options
‘Copy’, ‘Refresh’, ‘Properties’ as the following screenshot, which is the same scenario with yours.
Based on my test, the issue could be due to the missing or corrupt SQL Server Data Tools. To work around the issue, you should install the latest SQL Server data tools for Visual Studio 2013. You could download the
ISO file for SQL Server data tools and extract the ISO files to your hard drive following the methods in this
article, and install the data tools. Please restart your computer after you complete the installation.
Regards,
Michelle Li -
Discovery System HUJ - Created Purchase Order is not shown...
Hello,
after log on to HUJ, I started the process procurment -> Approve Purchase Requisition and Create Purchase Order. I could read the material and create the Purchase Requisition, but after that, it is not shown. After 60s I get an time out instead...-
How can that be healed?
Petercustomizing problem.
or
field mapping not correct. -
Display of Visual Studio not refreshing?
I just downloaded and installed Visual Studio 2013 Professional (for free as a student from dreamspark.com). I tried starting it through the first time through Unity, and the first login window did not refresh properly after I logged in. I was able
to navigate pact it, by dragging the window back and forth across my two monitors to force the contents to refresh.
When I open VS2013 from Unity or on its own, it doesn't show all of the window's contents. It is as if it is not refreshing the view. I can force it to refresh parts of the window by resizing it, etc, but with this behavior, it is unusable. Has anyone encountered
a problem like this, or have an idea for a fix?
Thank you!Visual Studio 2013 Tools for Unity
Also may want to read below link first.
Working with Unity3D and Visual Studio 2013
La vida loca -
I use Visual Studio to create Cordova projects. I need to build Cordova projects using msbuild and buildbot via script for my project but I can find only information about how VS combine with Cordova CLI to build multi device hybrid application.
Hi Samseth,
Yes, correct, the only thing we can find on the MSDN is:
Deploy and Run Your App
And that's the reason why Visual Studio Tools for Apache Cordova existing.
I think you may get more detail compile information from here:
http://cordova.apache.org/docs/en/4.0.0/guide_cli_index.md.html
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How do you retrieve the list of intellisense completions created by Visual Studio
Hello All,
I have a Visual Studio extension that provides statement completion (Intellisense). I build a series of Completions that are then provided to the customer. However, in my list of completions I would like to provide all variables of a certain type. In the
default (All) intellisense list provided by Visual Studio, a user has access to all the completions representing these variables that are available in the editor.
Is there any sort of interface or method to retrieve this information so I can provide a merged list of Completions in my StatementCompletion list? I would like to avoid needing to scrape the text of the file currently being edited as Visual Studio has already
done the work for me and has a better sense of what is available based on the language currently being edited.
Thank you for all your help.
Sincerely,
Dirk DuboisHello shawnzkz,
Thank you for the response. Based on what I read in the StackOverflow posts, it looks like there is no formal interface to retrieve information about variables and other Completions built by Visual Studio. Is there a place I can log a feature request for
the Visual Studio SDK? I think this sort of interface would add a lot of value for customers attempting to append the existing intellisense features of Visual Studio.
Thanks for all your help,
Dirk
Maybe you are looking for
-
My itouch will not allow me to connect to my wifi. It doesn't even let me get onto my wifi settings. The button is unhighlighted as well therefore it won't even let me fix it or choose a wifi network-any network!!!!!! So i can't access NOTHING!!!!
-
I Can't Get CD's To Go On My iPOD.HELP!!! ASAP
When I used to put a cd in the computer it would go straight to itunes,or give me an option to go to itunes-now it doesn't go to itunes or give me an option to go to itunes.i just got my computer back from being fixed,and had to put itunes back on my
-
Basically dropped my phone a couple of times, also spilt water on it...both in the same night...water didnt appear to penetrate the phone but for some reason i can now only view things in landscape that have landscape capability...ie messages, photo'
-
Some guest clients stuck in DHCP_REQD state
Hi everyone, We are regularly having issues with some (random) wireless guest users not being able to connect to our guest SSID while others are able to connect just fine. They get stuck in the DHCP_REQD state so do not even make it to the web authen
-
Integration of icefaces in jdev 11gTP2
Hi, I want to know if it is possible to integrate icefaces with TP2 or any other framework Thanks