Table/field/report showing approver of payment run in F110

After reviewing the payment proposal in F110, supervisor approves the Payment Run by clicking u201CStart immediatelyu201D in Schedule Payment pop-up. 
For audit purposes, we need to view who approved specified payment runs.  Anyone knows the table, field, or report would contain that information? 
Appreciate any help.

They're a document that records when things get changed.  "Things" includes pretty much anything from material master to sales orders, hence "general".  
But It isn't enabled by default for all tables, mainly for performance reasons. Is it enabled for the relevant REG.... table(s) in the data dictionary?  You might need to check with a basis guy or abapper.
I'd say enabling it is simpler than modding the standard programs and tables, like by adding fields to REGUV.

Similar Messages

  • In which table can I find data about payment runs (F110)

    Good morning,
    Can anyone tell me in which table I can find data about payment runs,which are carried out via transaction F110?
    Data about dunning runs can be found in table MAHNV, KNB5 & LFB5.
    Thank you.
    Kind regards,
    Linda

    Hi
    See in REGUH and REGUP. Also for Check payments, it can be seen in PAYR
    Jayaram

  • Automatic payment run through F110

    Hi Everyone,
    During the aotumatic payment run via F110, after creating the proposals when i am trying to display the proposal, it is giving an error message that " Company Code XY12 / XY12 does not appearin proposal 08.07.2011 AB00; correct "
    But I already set company code XY12 , in the company code in the parameter tab. I ahve also set there payment methods and next payment date. Please help.

    Hi
    After you get the mesage
    Carried out Automatic Payment Run through F110
    Posting orders: 2 generated, 0 completed
    You need to refersh data by pressing Status or Pressing Enter.
    Regards
    Venkat

  • Payment Run (TCode F110) Requirement

    Hi,
    We have a requirement that when Payment run (TCode F110) is run for a particular company code for international payments and if the payment run has a credit memo and if more then 4 lines are cleared and the currency is Euro, then the payment advise should be printed immediately and should not end up in spool.
    If the above conditions are not met then the payment advise should end up in spool the way they are currently.
    Please suggest how to fulfill the above requirement.
    Thanks and Regards,
    John

    Moderator message - Please do not post your requirements and ask the forum to do your work for you - post locked
    Rob

  • T. Code for Cancelling / Deleting the Payment Run in F110

    Hi Gurus,
    Can anybody please tell me the transaction code for deleting the payment run (before taking print out) in F110.
    I tried to do it from F110 itself and is working fine.
    I want to know if there is any separate T.Code available.
    Regards.
    Vikas

    Hi Chintan
    If there is no concept of Deleting Output then why SAP provided Delete Output Option in F110.
    Vikas you are right We can Delete the Payment Run in F110 itself.
    And as you mentioned you did not make the printout form so there is no Check Printed, you go to Transaction FBRA and Reset & Reverse the Payment Document(Clearing Document).
    If the Check is printed then you need to use FCH8 , Cancel the Check and then Reverse the Document as said Above by Zubin.
    Regards
    Venkat

  • IDOC Output for Payment Run through F110

    Gurus,
    I am trying to generate IDOCS for the payment run through F110 transaction. I have setup the following but still unable to generate the IDOCS.
    - Bank partner setup with IDOC PEXR2001 and message PAYEXT.
    - House bank configuration.
    Can anyone help me with the complete set of instructions to generate the idocs?
    Thanks in advance,
    Rishi

    Hi
    Have you done House Bank Configurations (FI12) and APP settings (FBZP)
    Are you using workflow concepts in this Scenario.
    Please check these 2 settings may be problem with these settings.
    Thanks
    Chandra

  • FPY1 - Approval of Payment Run for Refunds

    Hi everyone!,
    We would like to be able to approve an entire Payment Run (FPY1) for refunds before creating the Payment Medium (DME).
    We already know that the approval for a refund processed through the transaction FPY1 can be done Individually by document/s with a workflow. However, is there any other workflow that could be used for approving an entire Payment Run?
    Thanks in advance for your help.
    Cordially
    Victor Goyo
    SAP Consultant

    Thanks Bill for your quick response,
    Unfortunately, simulation in this case couldn’t work because it’s not really a proposal, and the total amount could change when the payment run is executed in real mode.
    Best regards
    Victor Goyo

  • Automatic Payment Run ( Tcode F110)

    Hello Friends,
    I am doing the payment run through tcode F110 and on this tcode screen we have third tab FREE SELECTION and in this we select fields based on document ,vendor and customer.
    When i am selecting radio button Document and it is opening one screen but in this screen some fields are missing from header table BKPF.
    Kindly tell me how to add one more field in that selection.
    Where i can do the settings to do one more field.
    Please give me some solution as  soon as possible,.
    Thanks a lot.

    Hi karthik,
    i am looking for the username field ie BKPF-USNAM field.
    Kindly tell me how to add this field.
    Thanks a lot

  • Question about DME file in payment run (transaction F110)

    Hi expert,
    I have made a payment run in transaction F110.
    The payment was made and the bank file (DME file) was created. We are using DME format /BE_BEPDTA.
    The bank number in the file is the bank account number from transaction FBZP (table V_T012K, field BANKN).
    However, we would like to use the "alternative account number "in the DME file. This is table T012K, field BNKN2.
    How can this field be used in the DME file for a specific bank ?
    Thank you for your support.
    Kind regards,
    Linda

    Hello,
    Copy /BE_BEPDTA in DMEE transaction code to ZBE_BEPDTA and modify according to your needs.
    Then use this format in FBZP settings. (payment method in country)
    Regards,
    Ravi

  • Payment run through F110 will send mail, need mail list where we maitain?

    Hello Experts
    when we run the payment run F110, it will send the mail to users , but can  i find where the mail recipient list maitain ?
    Please help me to enhanse the mail list.
    Thanks

    Kalyan,
    If my guess is correct accounting clerk assigned in the vendor master might be driving this. Check the accounting clerk id's assigned to the vendors. Check the accounting clerk configuration by following the menu path : SAP IMG->Financial accounting ->Accounts receivable and payable ->vendor accounts -> master date ->Define accounting clerks.
    If this is the case you have to create a new accounting clerk id and assign the same to vendors which are processed by new business user.
    I hope it will help,

  • Payment Run in F110

    Hi Gurus,
    Is it possible to set a default GL account when we execute a payment run for the proposal that we made in t-code F110?  This will be for a specific company code and specific payment methods only.
    Thanks,
    Ellicec

    Hi Atif,
    Thank you very much for your reply.  I have already done the config in FBZP.
    I just have another inquiry.  Is it also possible to set a default document type when you run a payment in F110.  Currenlty, it is defaulted to document type ZP.
    Thanks,
    Ellicec

  • Payment run issue F110

    Dear all,
    we recently migrated from 4.6 to 6.0.
    For our small subsidiaries, we have a program to load vender's invoices without specifying payment method and house bank.
    Before migration, F110 took the payment method and house bank from vendor´s master data. F110 didn't cause problems whenever there was only one payment method in vendor's master data specified.
    After migration, F110 dosen't find payment method and house bank anymore. All invoices without payment method and house bank specified in the invoice document, appear like an exception in the payment run.
    Is there anything I can do to make it work as before?
    Regards,
    Claudia.

    Hi Kris and Mahesh,
    this is all checked.
    The message which is displayed is that there is no valid payment method found.
    But we didn't change anything, just after the migration it stopped working.
    Housebank has the same currency and payment method as vendor's master.
    I compared two invoice documents before and after migration, they are exactly the same and vendors master data wasn't modified since 2006.
    This happens for all of our small subsidiaries using a program to load invoices which doesn't include payment method or house bank info.
    Regards
    Claudia.

  • Is it possible to find out which user deleted a BACS Payment run in F110

    We have had a bit of a crisis here. A payment run has been deleted after all internal audits had been carried out. No one has said they deleted it but I wondered if there was anyway we could find out?

    Hello,
    Do you mean, proposal was completed and checked in audit and when you submit for actual payment, this run was already deleted? If yes, it can't be a technical issue. Someone must have deleted manually from F110 and unfortunately, there is no traces for this.
    You can only find who all used F110 in a given period say between proposal completion time and deletion time. But, can't fnd exact user who deleted the run!
    For future action, you can workout with BASIS, identify which authorization is called for delete action and restrict this access to few authorized people only.
    Thanks,
    V V

  • DME Output not Generated after Payment Run in F110

    Hello,
    I have a typical problem. I have been running the payment run for a Finland Company  and I am not able to generate the DME data medium contents in the overview which generally appears for other company.
    I have checked the Payment Method for the Country and the Format given there is FI_LUM2. And the Payment Method Workbench is selected instead of the classic payment programs. In the payment method for company code there are no forms available. I just wanted to ask whether it is mandatory to define a form at the company code level in case of a Payment Method Workbench being used in Country payment method?
    About the customizing of PMW Payment Medium formats I went to the node Adjust Payment Medium Formats and then checked at standard settings for the relevant format FI_LUM2 and found that payment medium accompanying sheet was not ticked. Could this be the cause.
    I don't really understand. Please help me out.
    Thanks
    Chetan Mahapatra.

    Hi,
    Run payment through F110 without putting variant name in front of RFFOEDI1.
    After running F110, go to SE38 transaction and put all the detail and execute, system will tell you the reason of not generating IDOC.
    Regards
    K Khatri

  • Next Payment run in F110

    Hi
    Can we make 'next payment date' in F110 as default with 'Posting date +1' & non editable.
    Thanks.

    Dear,
    yes but You should create a background job of F110S, where You define a dynamic date variable variant as per Your requirement,  by SE36.
    I hope this helps.
    Mauri

Maybe you are looking for

  • Error installing SAP NetWeaver 7.01 ABAP Trial Version on Windows Vista

    This is my second attempt to install. The first time the laptop froze during the MaxDB installation. I was not able to use uninstall.exe (did not exist), so I deleted the entire contents of the sapdb folder and also ran the registry clean tool, Regis

  • Server Exception : The data exceeds the length

    Hi All, I am updating a MDM record through API . modifyrecord . I am changing almost 50 fields in record and then modifying . I get an error , the data exceeds the length . How can i know which particular Field is giving error . It just says the data

  • My mac is flashing a file icon with a quetion mark when i start it up

    When i start up my mac book pro it flahes a file icon with a question mark on it and stops there. Please help. 

  • Want help to create jar file

    Hi.... To Run my project user should install some software�s.. so I want to create a JAR file Using that user can install my software�s. I have created a JAR file using � jar cvfm Test. jar manifest.mf gsv48w32.exe jdk-1_5_0_06-windows-i586-p.exe � i

  • Converting odd date format to another format

    Hey all, I have a date format that looks like this: "2006-08-29T00:00:00.000Z" so i have written this code: DateFormat dFormat = new SimpleDateFormat("yyyy-MM-dd'T'HH:mm:ss:SSSZ");when i try to do dFormat.parse("2006-08-29T00:00:00.000Z");i get this: