Table for Individual capacity of Workcenter

Hi friends,
I am working on one requirement for which I need table which is used for storing 'Iindividual capacity' . I could not find the table. Please help.
I am not intrested in Capacity table like KAKO , need table for 'Individual capacity' (which we do enter on cap header screen of work center - goto - individual capacities)

Hi,
you can get the Individual capcity in following table for work center.
KAPA - ANZHL
   KAZY - ANZHL
   LDLBC -AZNOR
Regards,
Sundaresan

Similar Messages

CO table for Planned capacity - KP 26 transaction

Hi,
Can anyone please tell me what is the Table , where the SAP stores the Capacity in Cost center planning . I could find the Planned activity in COSS table , i also searched COKP but coudn't find the Capacity.
I am referring the KP26 transaction where we store these two values for Activity price calculation.
regards
Ranjan Kumar

Hi,
Did you check COKL and COEPL tables?
Regards,
Eli

Table for Remaining capacity requirements

In Project Systems, Person Assignment tab of an activity, there is a field Remaining capacity requirements (which result from subtracting the requirements of the individual split from the overall requirements). Can you tell me the table where I can findout the total details of this filed.

Hi
Click on F1 on the field and go to technical information and check the field name. If you dont find table over there, take the field name and go to SE84 transaction code.
click on ABAP Dictionary --> Fields --> Table fields
Enter field name and execute. YOu will get list of tables, where this field is containing. You can check relevant table from list.
Hope it helps.
regards
Srinivas

Split Individual Capacity for Work Centers

In Capacity Leveling for Individual Capacity (CM27 & CM28), what is the process in setting up individual "persons"?
What I would like to do is take an individual work center and divide it up into several different areas. I would like to treat the individual 'persons' as listed in Individual Capacity as those different areas I would divide my work center up into.
However, I have no current setup for personel available and when I go to assign a 'Person' to a specific quantity for my work center, there is "no persons found for the work center".
Where do I go to setup individual "persons" for my work center, and is this a realistic way to divide my work center up?
If not realistic, what method would you recommend to split up the work centers?
Edited by: Cameron on Sep 21, 2009 3:06 PM

Hi,
The best way to learn all these settings is studying the documentation in the IMG itself.
Still id you need the link or documents to read
"http://help.sap.com/saphelp_47x200/helpdata/en/b1/c03e4a439a11d189410000e829fbbd/frameset.htm"
Read the documentation step by step....
I hope this will help you.
Thanks
Raja

Any good table for Capacity Planning?

HI all,
Is there any table for capacity planning?
we want to do some development to get capacity requirements data for each work center, don't like using CM01.
Thanks!
Harvey

Dear
Please find below SAP tables for CRP :
CRHD         Workcenter Header Data
CRCA         Workcenter Capacity Allocation
CRCO         Workcenter Cost Center Assignment
CRHH          Hierarchy Header
CRHS           Hierarchy Structure
CRTX          Workcenter Text
KAKO         Capacity Header
KAZY          Intervals of Capacity
Regards
JH

Adding ToolTip for individual cell in the table

Hi everybody,
Its urgent. I want to add ToolTip for individual cells. What I have implemented, it show same ToolTip for each cell. I want different ToolTip for individual cell.
My cells are not editable, as i need this.
Pleae help me.
Thanks in Advance.
Dawoodzai

Hi,
See this demo pasted below-
import java.awt.*;
import javax.swing.*;
public class SimpleTableDemo extends JFrame {
     public SimpleTableDemo() {
          super("SimpleTableDemo");
          Object[][] data = {
               {"Mary", "Campione", "Snowboarding", new Integer(5), new Boolean(false)},
               {"Alison", "Huml", "Rowing", new Integer(3), new Boolean(true)},
               {"Kathy", "Walrath", "Chasing toddlers", new Integer(2), new Boolean(false)},
               {"Sharon", "Zakhour", "Speed reading", new Integer(20), new Boolean(true)},
               {"Angela", "Lih", "Teaching high school", new Integer(4), new Boolean(false)}
          String[] columnNames = {"First Name", "Last Name", "Sport", "# of Years", "Vegetarian"};
          final JTable table = new MyTable(data, columnNames);
          table.setPreferredScrollableViewportSize(new Dimension(500, 70));
          JScrollPane scrollPane = new JScrollPane(table);
          getContentPane().add(scrollPane, BorderLayout.CENTER);
     public static void main(String[] args) {
          SimpleTableDemo frame = new SimpleTableDemo();
          frame.pack();
          frame.setVisible(true);
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class MyTable extends JTable {
     public MyTable(Object[][] rowData, Object[] columnNames) {
          super(rowData,columnNames);
     public String getToolTipText(MouseEvent e) {
          int r = rowAtPoint(e.getPoint());
          int c = columnAtPoint(e.getPoint());
          return getValueAt(r,c).toString();
}

Tables for capacity planning?

HI all,
Is there any table for capacity planning?
we want to do some development to get capacity requirements data for each work center, don't like using CM01.
Thanks!
Harvey

>
harvey wu wrote:
> HI all,
>
> Is there any table for capacity planning?
> we want to do some development to get capacity requirements data for each work center, don't like using CM01.
> Thanks!
>
> Harvey
Hi Harvey,
Kindly check if the Below tables satisfy ur requriement
KBED      Capacity Requirements Records
KBEZ      Add. data for table KBED (for indiv. capacities/sp
KBKO      Header Record for Capacity Requirements
Reg
Dsk

Table For Capacity requirements

Hello Every one,
Does any body know the table which contains details for capacity requirements raised for a planned order and production order raised for a specific tme period for multiple capacity categories.
The table should contain or a logic should exist to link the following fields:
1. Planned order, production order
2. Capacity requirements
3. Capacity category.
4. Period
This is because my current uses capacities of 2 capacity categories (machine and labor) to plan production.
Sincerely,
Aji

Hello Aji,
Please find the tables:
KBKO    Header record for capacity requirements
KAKO    Capacity Header Segment
KAKT    Capacity Description
KAZY    Intervals of Capacity
KBKO     Header record for capacity requirements
KBED     Capacity requirements records
KBKO     Header record for capacity requirements
KBED      Capacity requirements records
KBEZ      Add. data for table KBED (for indiv. capacities/splits)
TC26      Capacity category
Regards,
Alok Tiwari

Capacity Reservation Table for a planned order

Dear experts,
When I look at MD13, I can see the capacity requirement for a planned order. I can also see the requirements build up in my CM01 screen. We would like to pull the data into our BW system, but we are having issues finding where the capacity reservation information resides. When I look at table KBEZ, I can only find values that correspond to production orders. Is there a similar table for planned orders? Does SAP save the detailed scheduling infromation for planned orders in a table somewhere, or is this calculated at the time MD13 or CM01 is run?
Thanks,
Matthew Bruckner

Have you tried with KBED? I can see with SE16 that you have a field for selection with the planned order number....

Cumulative Individual Capacity in CM01

Hello All,
can anyone let me know how do i get Cumulative Individual Capacity for a workcenter and a plant as i am getting in CM01 tcode.
Actually i am writing a method with import parameters as workcenter , plant, start_date and end_date.
and i need to fetch all the avaliable capacity for that workcenter for the given dates .
but the output should be same as when i check from tcode CM01 for Cumulative Individual Capacity .
I hope i am clear ....
Regards
Ravi Aswani

Dear ,
Bssically , it goes from KBEZ Add. data for table KBED -CRHD(Work Centre )-AUFK/AFVC(Operation details at Production Order ) .
Refer this thread : PP Tables
Individual Capcity comes from Work Center Addtional Capacity Tab and seats into Operation Overview of Production Order .
Hope it clarifies
Regards
JH

Use of Planning Table (MF50) in Capacity Levelling with Production Order

Hello Experts
I wish to know that is it possible to perform Capacity Levelling in planning table (tcode MF50) with respect to a Production Order ? It is known that MF50 is used in Repetitive manufacuring to do the capacity levelling with respect to Planned orders. But in our discrete manufacturing scenario we want to use planning table to the capacity levelling with respect toa Production order.
Any clue or help pertaining to this will be highly appreciated.
Thanks in advance
Regards
Jayanta

Dear ,
MF50 is does the cacapcity leveling based on mateail -run schedule order (planned order ) where as in discrete manufacturing , when you run the MRP , MRP system assume Infinite Capacity and schedule the order as per your selection in MD02(2,1,3,3,2) and then you convert those planned order to Production order .Here you checkied the Capacity in Production Order level .
In stanadrd SAP , it is not possible to use MF50 for discrete production order.
In discrete order or process order , do the caapcity leveling , there are seperate planning table available based on Over all Capacity Profile and Schedule type .This can be done in following way :
1.CM31-Production Order Wise -Tabular
2.CM23-PO wise -Graphical
3.MC88: Ruf Cut Planning
Work Centre Wise : CM21 -Graphical , CM22-Tabular Planning Table .
Make sure the below set up before you carry on the Capacity leveling :
.Define time profile in OPD2.
Define the strategy profile in OPDB
Define the Overall profiles in OPD0.
In OPJK maintained check capacity with SAPSFCG013 profile for your production order type
In OPU3 , scheduleing parametre s: Generate Capacity , Scheduling Type , Automatic Log ,Start date in Past as per your req.
In OPJU , chekc the contol tab of the scheduleing as per OPU3
In OPKP- Production scheduling paranmeters assing the overall capacity profile -SAPSFCG013 with finte scheduling tick.
Master Data :
1.Materials Master define the Production scheduler and production scheduling profile
2.Work Center - Define the capcity planner group,activate checkbox Relevant for Finite sceduling,on the capacity header define the shift timings,break timings and unit of measure,no of individual capaity, enter formula for scheduling in capacity view.
3.Routing - enter the values for the standard values. Use control key with scheduling.
Hope this will help you .
Regards
JH

Can we give name to individual Capacity

If yes where we can give it
in cm27 we have idividual capacity wise capacity planning table, so where to give name to that one.
in cm27, left clomn individual capacity colomn is there.
as we are defining IN. Capacities in work center ny numeric no. in capacity view, but I want to give name to individual capacities.
Help Me Out
Thanks Gurus
Edited by: Samir Momin on Mar 20, 2009 12:18 PM

Hi
You create capacity using Tcode CR11.
Capacity name
Description by which the capacity (for example, a machine capacity, a labor capacity or a move capacity)
is to be created in the system (when creating the capacity) or
is known in the system (when changing, displaying or using the capacity).

How to pull multiple lines of info from a table for a Specific Company/Address

What I would like to do is have one Table that I enter all my information on in Numbers for incoming rent like the one below. Since I have 8 spaces to rent I will have up to 96 plus rows of information to look at. But I would like to have Numbers then on separate pages is have the individual Companies have their own rent break down on a table with the Date Recieved and the amount they payed. From there on their separate page I can have the Late Charges come into play or whatever I choose.
Date
Company
Address
Rent Recieved
Jan 1, 2011
X
430
$1,100.00
Jan 3, 2011
Y
440
$1,200.00
Jan 5, 2011
Z
450
$1,300.00
Feb 1, 2011
Y
440
$1,200.00
Feb 3, 2011
X
430
$1,100.00
Feb 8, 2011
Z
450
$1,300.00
Mar 1, 2011
Z
450
$1,300.00
Mar 2, 2011
X
430
$1,100.00
Mar 5, 2011
Y
440
$1,200.00
The following table would be on the separate page with the formula (I do not know how to write) grabbing the info from the above table.
Company X Rent Recieved
Date
Rent Recieved
From the formula that one of you gracious smart people provide I could create a table for each of the Companies that rent from me on their own Tables on separate Tabs.
I know I could go to each individual Tab and write it in but I will be primarily working on my iPad and this would make it easier. I can also utilize the fresh Tables to do other calculations.

I got a soluce with no swap.
I created a new column (E)
In E2, the formula is :
=B&IF(ISBLANK(A),"",MONTH(A))
Apply Fill Down
In table of each company, I inserted a 2nd header row so that I may store the name of the company in A1.
In A3, the formula is :
=IFERROR(OFFSET(Tableau 1 :: $A$1,MATCH($A$1&ROW()-2,Tableau 1 :: $E,0)-1,0),"")
in B3, the formula is :
=IFERROR(OFFSET(Tableau 1 :: $D$1,MATCH($A$1&ROW()-2,Tableau 1 :: $E,0)-1,0),"")
Select A3:B3 then Fill Down.
That's all folks !
Yvan KOENIG (VALLAURIS, France) jeudi 19 mai 2011 17:18:32
Please :
Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

System Tables for Logs

Does anybody know what system tables store the logs displayed in ST22 and SM37? Trying to programmatically read and display the logs.
Thanks a bunch for your help.

Hi,
These are tables for Job scheduling
Once jobs are defined, they are stored in the R/3 database, in the following principal tables in the background processing system:
TBTCO: The job header table (job management data)
TBTCP: The job step table (individual processing steps in jobs) -to describe the detailed level for each job.
TBTCS: The control table for the time-driven job scheduler

Table for characteristics values in the sales order

Hi Experts
I am entering the characteristics values in the classification screen in the sales order.
I want to capture the characteristics & values with reference to the individual sales order for reports.
Please let me know the tables for the same as it doesn't get capture in the item table..
Thanks
Ganesh
Edited by: jganesh on May 4, 2011 1:26 PM

Hiii,
you may use VELO01_GET_CONFIGURATION function module to pass VBAP-CUOBJ value
Hope it will solve your problem.
Regards
Shambhu Sarkar

Table for Individual capacity of Workcenter

Similar Messages

Maybe you are looking for