Table for inspection plan

hi all ,
what are the tables related to inspection plan in QM Module
regards

Following r the important table for inpection plan
1) PLKO    Inspection plan header
2) PLPO    Operation details
3) PLMK    Inspection plan characteristics
4) PLMW   Dependent characteristics specification
5) TQ72     Type of share calculation
6) TQ75      Qm formula parameters
7)TQ03      Control for screen texts
Amol

Similar Messages

Digital Signature for Inspection Plan and Routing

Hi,
Can someone please help me on the topic of how to activate Digital Signature for inspection plan changes. I need to activate Digital signature functionality for inspection plan or routing. Please guide me to any link or shared documents on this topic.
Thanks
Vineeth

Hi Vineeth,
Standard SAP does not support this. Though I came across similar situation for maintenance plan, where we used BADI for this.
Try to go through DIG_SIGNATURE_MAINT_PLAN. Consult with a good ABAPer if he can modify it some how for inspection plan.
The links below may help you to understand the functionality [http://wiki.sdn.sap.com/wiki/display/SAPMDM/E-SIGNATUREforMaintenancePlants-MasterData(ECC6.0)] & [http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YN-IF_EX_IPRM_DIG_SIGNATURE~~~~~~DIG_SIGNATURE_MAINT_PLAN]
In SAP, check BADI_DIG_SIG_RES_REC_PROCESS, if anything can be done here.

Any good table for Capacity Planning?

HI all,
Is there any table for capacity planning?
we want to do some development to get capacity requirements data for each work center, don't like using CM01.
Thanks!
Harvey

Dear
Please find below SAP tables for CRP :
CRHD         Workcenter Header Data
CRCA         Workcenter Capacity Allocation
CRCO         Workcenter Cost Center Assignment
CRHH          Hierarchy Header
CRHS           Hierarchy Structure
CRTX          Workcenter Text
KAKO         Capacity Header
KAZY          Intervals of Capacity
Regards
JH

Tables for capacity planning?

HI all,
Is there any table for capacity planning?
we want to do some development to get capacity requirements data for each work center, don't like using CM01.
Thanks!
Harvey

>
harvey wu wrote:
> HI all,
>
> Is there any table for capacity planning?
> we want to do some development to get capacity requirements data for each work center, don't like using CM01.
> Thanks!
>
> Harvey
Hi Harvey,
Kindly check if the Below tables satisfy ur requriement
KBED      Capacity Requirements Records
KBEZ      Add. data for table KBED (for indiv. capacities/sp
KBKO      Header Record for Capacity Requirements
Reg
Dsk

Table for Quality Plan

Hi All,
I want to download the existing Inspection Plans from the SAP. Please guide me with the Table name which will provide the maximum details (header data, operation data and MICs).
Thanks in advance
Sam

Hi
You will get the details from these tables
Inspection Plan PLKO Inspection plan Header
Inspection Plan MAPL Material Assignement
Inspection Plan PLPO Operation Details
Inspection Plan PLMK Inspection plan characteristics
Inspection Plan PLMW MAPL-Dependent Charac. Specifications (Inspection Plan)
Regards
Gajesh

Table for maintenance plan and maintenance cycle and Unit

Hello,
I need to know the table where the values are stored for maintenance plan, maintenance cycle and Unit.
I know that we can get the maintenance cycle and unit from MMPT table.
Question 1
If the maintenance plan has only a single cycle then the data is stored in above table MMPT, but if a maintenance plan has mutiple cycles like 1 maintenance plan has maintenance cycle as 364 Days and 1092 days then the data is not stored in MMPt table.
Question 2
Requirement is I need to develop a report where in I need maintenance order, maintenance plan and the relevant maintenance cycle and unit. Supose an maintenance order is created for the above maintenance plan which has 2 maintenance cycle how can I identify for which maintenance cycle the order is created.
Regards,
Narendra

Hi,
Please review PM tables
PM/SM/SD Tables
MPOS                       Maintenance Items
AFAB     Network - Relationships
PLKO     Task list
PLAS
AFFH     Operations
PRT assignment data for the work order
AFFL     Work order sequence
AFFT     Order process instructions
AFFV     Order process instruction values
AFFW     Goods movements with errors from confirmations
AFIH     Maintenance order header
AFKO     Order header data PP orders
AFPO     Order item
AFRC     Table of planned changes to conf.: Automatic goods receipt
AFRD     Default values for collective confirmation
AFRH     Header information for confirmation pool
AFRU     Order completion confirmations
AFRV     Pool of confirmations
AFVC     Operation within an order
AFVU     DB structure of the user fields of the operation
AFVV     DB structure of the quantities/dates/values in the operation
MPOS     Maintenance ITEM
AFWI     Subsequently posted goods movements for confirmations
AUFK     Order master data
AUFM     Goods movement for order
MPLA     Maintenance Plans
BGMK     Master warranty header
BGMP     Master warranty item
BGMS     Text item master warranty
BGMT     Master warranty text
BGMZ     Warranty counter information
CRHD     Work Center Header
CRTX     Text for the Work Center or Production Resource/Tool
EQKT     Equipment short texts
EQST     Equipment link to BOM
EQUI     Equipment master data
EQUZ     Equipment time segment
HIKO     Order master data history
IFLO     Functional Location (View)
IFLOT     Functional location (TABLE)
IFLOTX     Functional location: Short texts
IHGNS     Plant maintenance permit segment
IHPA     Plant Maintenance: Partners
IHSG     Object-related permits in Plant Maintenance
ILOA     PM object location and account assignment
IMPTT     Measuring point (table)
IMRG     Measurement document
KAKO     Capacity Header Segment
KONP     Conditions (Item)
KONV     Conditions (Procedure Data)
OBJK     Plant Maintenance Object List
QMEL     Quality notification
QMFE     Quality notification - items
QMIH     Quality message - maintenance data excerpt
QMMA     Quality notification - activities
QMSM     Notification - Tasks
QMUR     Quality notification - causes
STPOA     Name is does not have an A at the end; BOM items
T001     Company Codes
T001L     Storage Locations
T001W     Plants
T077D     Customer account groups
T003O     Order Types
T352R     Maintenance revisions
T353I_T     Maintenance activity type description
T356     Priorities
T357G     Permits
T357G_T     Table 357G texts
T370A     Activity category for PM lists
TINCT     Customers: Incoterms: Texts
TVKO     Organizational Unit: Sales Organizations
TVKOS     Organizational Unit: Divisions per Sales Organization
TVKOV     Org. Unit: Distribution Channels per Sales Organization
TVTA     Organizational Unit: Sales Area(s)
VIAUFKST     Order selection view
MMPT Cycle detail
Regards
Carlos

BDC for Inspection plan

Dear QM Gurus,
I have recorded BDC for QP01.
At the time of recording system was not asking for "Inspection Method". Also we have not created inspection method for any material. But after completion of recording, abaper has done his job to run that BDC.
Now when i am uploading template after entering MIC, system popup mandatory screen to enter inspection method. Here we stuck.
Please guide.
Thanks in advance.
Kailash Thakkar

Hi Kailash,
Inspection method is not mandatory field, you should be allowed to save the Quality plan w/o entering method. Please check following :
1) Just check you have not assigned any method while creating MIC.
2) Ask ABAPER to modify the program to exclude the inspection method from BDC.
3) I problem not resolved by any other way, then create a simple insp method like visual check and assign it to all MIC's in Quality plan.
Best Regards,
Shekhar

LSMW for Inspection Plan

Hi Sapiens,
I am a requirement to upload the Quality Management data through LSMW.
1) Quality Info Recrod
2) Inspection Plan
For the first one, I could able to create Project in LSMW and successfully do for over 200 customers.
I am saying problem in creating and uploading the Inspection Plan data.
I created one inspection plan with a material in QP01 (Tcode), and assigned one customer in "Material Assignment".
We have only hand full of materials (6-10 max) with MICs (10 - 15 max). So I using the same Inspection plan for material and I want to assign all the customer in Inspection plan at "Material Assignment". But at "Run Batch Input Record" in LSMW, it is failing. due to the below errors.
1) Field MAPL-PLNAL(2) is not an input field
2) Field MAPL-MATNR(2) is not an input field
3) Field MAPL-WERKS(2) is not an input field
I understand that these fields are repeating, as these fields are required in "Material Assignment" tab, where I will mention Counter, Matl, Plant and Customer. but it is saying these fields are not for input. If I dont use these fields in Field mapping then it will throw an error during actual recording.
So, I need some inputs on it and all of your suggestions will be valuable.
Awaiting of your reply on this soon.
thanks,
Mukesh

Hi Mukesh,
I would suggest to go for BAPI instead of LSMW for the inspection plans, if possible.
Regards,
Rahul

Capacity Reservation Table for a planned order

Dear experts,
When I look at MD13, I can see the capacity requirement for a planned order. I can also see the requirements build up in my CM01 screen. We would like to pull the data into our BW system, but we are having issues finding where the capacity reservation information resides. When I look at table KBEZ, I can only find values that correspond to production orders. Is there a similar table for planned orders? Does SAP save the detailed scheduling infromation for planned orders in a table somewhere, or is this calculated at the time MD13 or CM01 is run?
Thanks,
Matthew Bruckner

Have you tried with KBED? I can see with SE16 that you have a field for selection with the planned order number....

Tables for Financial Planning uploaded through GP12n

Hi Experts,
Can any one guide me, on where the amouts uploaded for financial planning through GP12N get stored i.e which table.
Please advise.
Thanks
Shailesh

Hi Sir,
Please find the below Table names may help you :-
T8PL00 FI Planning: Installed Plan Tables
T8PL01 FI-Planning: Summary Table Dimensions to be Planned
T8PL01DD FI Planning: Dimensions Table Index - Dictionary Information
T8PL01DP FI Planning : Field Dependency for Validation
T8PL01S FI-Planning: Dimensions that Allow Sets
T8PL01SF FI Planning: Special Handling of Dimensions
T8PL01SV FI-Planning: Comb. fixed values/attr. for key fig. and dim.
T8PL02 FI-Planning: User attributes
T8PL02CC FI Planning: Currency Translation
T8PL03 FI Planning: Configuration of Plan Tasks
T8PLUATTR FI-Planning: Key Figures for Planning
If you have any doubts feel free to share.
Regards,
Pankaj A Bhalerao.

Automatic Results Recording for Inspection Plan

I'm trying to activate automatic results recording, at the beginning I get this meassage: "In customizing for default value of inspection type(400) you have to activate the following check boxes, " check characteristics", "Inspection with task list" & "Automatic assignment", I've done that. Yet, it sill doesn't work and the lot status is "CRTD" however it should be updated to "REL" status.

Hi,
Did you search enough before posting this query? There is plenty of discussions over this matter.
Based on the details given above, I don't think you have created an inspection plan.
Automatic assignment will assign the task list automatically to the inspection lot once it is created. You didn't mention if you have created one or not. Pl check that.
If the inspection plan is created, there could be possibility that material is assigned to more than one task list (inspection plan). If that is the case, you wouldn't get inspection lots with REL status but CRTD only.
ntn

Table for "Budget planning : Cost Center"

Hi Gurus,
can anyone pls tell me table for "Budget : Cost Centre" . We create budget with respect to cost center in KPZ2/KPZ3 but i am unable to find out in which this data can be found.
Pls tell me the table to retrieve the data.
Regards

You can do it yourself.
goto transaction St05. activate the trace. then execute the transaction. after execution goto st05. click deactivate trace.
then click display trace...hit enter button. a list will be displayed. goto menu bar choose first menu then choose option "Summarice sql statements"...a list will be displayed from which you can know what all tables were affected by the transaction.

Picture attachments for inspection plans

We are using QM in Procurement to inspect incoming raw materials. We have created inspection plans per a material or group of materials and would like to provide a relevant picture(s) that can be viewed when the inspector is recording results on the inspection lot. We have looked at attaching pictures to the material master using GOS or using the PRT and DMS document that links to an external file. Both solutions take additional clicks to bring up an externally stored document. We are wondering what other companies are doing if they have a similar requirement to display pictures during the results recording process.

Hi,
Attaching a picture or any document in SAP , the best way is through DMS only. By using this you can store the required pictures or drawings and can call the same at any place. You may be able to attach some attachments at PO / Insp method but that will lower the performance of server. If you attach so many documents then your transaction performance will be affected. So better to store data in separate server and call it when needed.
Best Regards,
Shekhar

Table for Product Plan Status

Hi,
In "Basic Data" tab of Product Plan Detail, there's Status field which is the "User" status for the Product Plan. I am looking for the table which contains this Status field. DPR_PROJECT table only contain "System" Status field.
Thanks & Regards,
Tony

Hi
PO status is stored in Structure not in the table.
Please use the List displays to get the information like ME2N,ME2L, ME2M, ME2K etc
You can also get the information from the table EKKO, EKPO, EKET,EKBE
Hope it helps
thanks/karthik

Table for overall 'plan' data of IO?

When you do KO12 to set the annual value plan for the internal order - is there a table I get that value out of?
Thanks
Karla

Hi Karla,
Year amounts are stored in BPJA.
Regards,
Eli

Table for inspection plan

Similar Messages

Maybe you are looking for