LSMW for Inspection Plan

Hi Sapiens,
I am a requirement to upload the Quality Management data through LSMW.
1) Quality Info Recrod
2) Inspection Plan
For the first one, I could able to create Project in LSMW and successfully do for over 200 customers.
I am saying problem in creating and uploading the Inspection Plan data.
I created one inspection plan with a material in QP01 (Tcode), and assigned one customer in "Material Assignment".
We have only hand full of materials (6-10 max) with MICs (10 - 15 max). So I using the same Inspection plan for material and I want to assign all the customer in Inspection plan at "Material Assignment". But at "Run Batch Input Record" in LSMW, it is failing. due to the below errors.
1) Field MAPL-PLNAL(2) is not an input field
2) Field MAPL-MATNR(2) is not an input field
3) Field MAPL-WERKS(2) is not an input field
I understand that these fields are repeating, as these fields are required in "Material Assignment" tab, where I will mention Counter, Matl, Plant and Customer. but it is saying these fields are not for input. If I dont use these fields in Field mapping then it will throw an error during actual recording.
So, I need some inputs on it and all of your suggestions will be valuable.
Awaiting of your reply on this soon.
thanks,
Mukesh

Hi Mukesh,
I would suggest to go for BAPI instead of LSMW for the inspection plans, if possible.
Regards,
Rahul

Similar Messages

Digital Signature for Inspection Plan and Routing

Hi,
Can someone please help me on the topic of how to activate Digital Signature for inspection plan changes. I need to activate Digital signature functionality for inspection plan or routing. Please guide me to any link or shared documents on this topic.
Thanks
Vineeth

Hi Vineeth,
Standard SAP does not support this. Though I came across similar situation for maintenance plan, where we used BADI for this.
Try to go through DIG_SIGNATURE_MAINT_PLAN. Consult with a good ABAPer if he can modify it some how for inspection plan.
The links below may help you to understand the functionality [http://wiki.sdn.sap.com/wiki/display/SAPMDM/E-SIGNATUREforMaintenancePlants-MasterData(ECC6.0)] & [http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YN-IF_EX_IPRM_DIG_SIGNATURE~~~~~~DIG_SIGNATURE_MAINT_PLAN]
In SAP, check BADI_DIG_SIG_RES_REC_PROCESS, if anything can be done here.

Table for inspection plan

hi all ,
what are the tables related to inspection plan in QM Module
regards

Following r the important table for inpection plan
1) PLKO    Inspection plan header
2) PLPO    Operation details
3) PLMK    Inspection plan characteristics
4) PLMW   Dependent characteristics specification
5) TQ72     Type of share calculation
6) TQ75      Qm formula parameters
7)TQ03      Control for screen texts
Amol

BDC for Inspection plan

Dear QM Gurus,
I have recorded BDC for QP01.
At the time of recording system was not asking for "Inspection Method". Also we have not created inspection method for any material. But after completion of recording, abaper has done his job to run that BDC.
Now when i am uploading template after entering MIC, system popup mandatory screen to enter inspection method. Here we stuck.
Please guide.
Thanks in advance.
Kailash Thakkar

Hi Kailash,
Inspection method is not mandatory field, you should be allowed to save the Quality plan w/o entering method. Please check following :
1) Just check you have not assigned any method while creating MIC.
2) Ask ABAPER to modify the program to exclude the inspection method from BDC.
3) I problem not resolved by any other way, then create a simple insp method like visual check and assign it to all MIC's in Quality plan.
Best Regards,
Shekhar

Automatic Results Recording for Inspection Plan

I'm trying to activate automatic results recording, at the beginning I get this meassage: "In customizing for default value of inspection type(400) you have to activate the following check boxes, " check characteristics", "Inspection with task list" & "Automatic assignment", I've done that. Yet, it sill doesn't work and the lot status is "CRTD" however it should be updated to "REL" status.

Hi,
Did you search enough before posting this query? There is plenty of discussions over this matter.
Based on the details given above, I don't think you have created an inspection plan.
Automatic assignment will assign the task list automatically to the inspection lot once it is created. You didn't mention if you have created one or not. Pl check that.
If the inspection plan is created, there could be possibility that material is assigned to more than one task list (inspection plan). If that is the case, you wouldn't get inspection lots with REL status but CRTD only.
ntn

Picture attachments for inspection plans

We are using QM in Procurement to inspect incoming raw materials. We have created inspection plans per a material or group of materials and would like to provide a relevant picture(s) that can be viewed when the inspector is recording results on the inspection lot. We have looked at attaching pictures to the material master using GOS or using the PRT and DMS document that links to an external file. Both solutions take additional clicks to bring up an externally stored document. We are wondering what other companies are doing if they have a similar requirement to display pictures during the results recording process.

Hi,
Attaching a picture or any document in SAP , the best way is through DMS only. By using this you can store the required pictures or drawings and can call the same at any place. You may be able to attach some attachments at PO / Insp method but that will lower the performance of server. If you attach so many documents then your transaction performance will be affected. So better to store data in separate server and call it when needed.
Best Regards,
Shekhar

LSMW for inspection characteristics - how to change (some) existing data

I have created a LSMW using the standard IDOC QPMK/QPMK01. Using structures E1BPQPMK_QPMK and E1BPQPMK_QPMT I am able to create IDOCS and post them into the system using BD87.
My requirement is to change only some fields of the characteristic, e.g. change only the sort field. At the point where I am now all information that I am not supplying to the LSMW/IDOC is deleted out of the characteristic. E.g. if I would not supply the values currently existing in the info field, they would be deleted once I post the IDOC with my changes.
My question is: how do I setup the LSMW/create the IDOC so that it modifies only the fields that I am supplying while leaving all other fields untouched? Is this possible?
Regards
Martin

I came up with the idea of reading the existing values out of the respective sap tables while doing the conversion within the LSMW step 11. This would mean that for each field I would have to setup coding in step 5 like this (example for Infofield 1):
SELECT single DUMMY10 from QPMK into E1BPQPMK_QPMK-INFOFIELD1 where
ZAEHLER = QPMK_UPLOAD-PLANT_QPMK and MKMNR = QPMK_UPLOAD-MSTR_CHAR and
VERSION = QPMK_UPLOAD-VMSTR_CHAR.
I tried this and it seems to work for this field. Quite some effort for all the fields but then it should be fine. Does anyone have some optimization proposals on this?
Regards
Martin

QM_LSMW for Inspection plan by BAPI method

Hi All,
Does anybody has any idea about LSMW by business object method using business object BUS1191?
can anybody give step by step procedure for the same?
Best Regards,
Anand Rao

Hi All,
Does anybody has any idea about LSMW by business object method using business object BUS1191?
can anybody give step by step procedure for the same?
Best Regards,
Anand Rao

BAPI FOR INSPECTION PLAN

Plz tell me step by step procedure of bapi_inspectionplan_create using LSMW .

Hi,
Please go through following link
[https://forums.sdn.sap.com/click.jspa?searchID=26454811&messageID=7508879|https://forums.sdn.sap.com/click.jspa?searchID=26454811&messageID=7508879]
Hope it helps

How to create inspection plan in mass for material

Dear Guru,
How to create inpection plan for material in MASS, usually we will create inspection plan in QP01 but in mass for more than one material how to maintaain? Please help
Regards
Karthik.

Hi raja
refer following lonks
QM- LSMW FOR INSPECTION PLAN
Re: CEWB:Inspection Plan upload
bapi for qm inspection plan
Regards
Sujit

Create Inspection Plan -error in control Indicators

Hi,
I am creating Inspection Plans using LSMW-DIRECT INPUT Method.
Although MIC's control indicator parameters are correct while creating a plan it is changing the control indicator parameters.
how can we suppress this?
I want to use MIC's default parameters.
Regards
Praveen

Hi Naresh,
QA32 screen shot suggests material has Revision level as "B".
Now Check Revision level for Inspection plan.
Amol.

Inspection Plans

Hello all..
We have data in SAP...we need to move it from one plant to another.
I need to move the inspection plans from one plant to another..I need to make source files for this in order to use LSMW, can anyone tell me how to make source files for Inspection plans, which tables to use and which all field to include???
Regards
Neha

Hi,
I think above solution is ok to make your work easy, but if you want that control then you can use Engg Change Number functionality.
1. every year create inspection lot manually with inspection type 89.
2. check for inspection plan changes
3. Generate Change number and with that change number change the inspection plan.
4. now for change number we have release strategy. we can use this release strategy.
Please try and let me know if that is working.
Regards,
Chaitanya Parchure

Errors while creating Inspection plan using BAPI_INSPECTIONPLAN_CREATE

Hi All,
I am writing an upload tool for inspection plans. In this program I use bapi: BAPI_INSPECTIONPLAN_CREATE.
I made an extraction of a excisting inspection plan with SXDA_TOOLS which uses the same bapi and filled the bapi structures with the similar data. Now I am getting strange messeges in the return structure as below.
1. Material is not maintained for plant NNNN. But the material is mainained for that plant.
2. Consistency check not successful when creating operation
3. Inspection characteristic cannot be uniquely assigned to one operation
Let me know your suggestions
Thanks,
Sabu

Hi All,
Have any one used this BAPI, BAPI_INSPECTIONPLAN_CREATE to create Inspection Plan ?
Can you help me on above errors?
Thanks in advance,
Sabu

How to display changes of inspection plan via t-code :CBWQM ?

Dear all,
We are using ECM for inspection plan updating, Is it possible to see changes in detail like QP60,QP61 via T-code : CBWQM ?
Regards,

QP61 Display change documents insp.plan?

Inspection Plan & MIC status.

Dear SAP,
We have a requirement that QC will creat the MIC & Inspection Plan in status created, and QA will review and change the status from Created to Release.So where or in which object level i can put control so that QC not able to select the Status 4 for inspection plan, and Release for MIC.
Regards,
Asif.

Dear Craig,
I have created a new roll will basis help.and attached the below condition in the object you can refer dow.But then to user able to create MIC & Inspection plan in release mode.Please explain what would be the issue.
MIC Status Table & Field Name (Object Name-Q_STA_QPMK,Table-QPMK, Field-LOEKZ)
Inspection Plan Status Table & Field Name (Object Name-Q_ROUT,Table-PLKPO, Field-VERWE)
QSTATMERK Master Inspection Characteristic Status 1
STATU Status 1
Regards,
Asif

LSMW for Inspection Plan

Similar Messages

Maybe you are looking for