Table for Outstanding orders and deliveries
Hi,
I have a requirement where I need to findout what is the outstanding quantity for an article (material). I need what is the wuantity in the sales order, and for how many quantities, the PGI is done for that sales order. So accordingly I can find out the outstanding quantity.
Can anybdy please let me know which table should I look for Sales order quantity and PGI quantity so that I can findout the outstanding quantity for a material.
Thanks & Regards
Satya
Hi Satya,
There is no one table where you can get this information. I would use the logic below for this requirement.
For the sales order item check the delivery status field in table VBUP. There are 3 possibilities here.
1) If the value is 'A' = Not yet processed, then the delivery quantity is zero and hence the entire line item quantity is pending
2) If the value is 'C' = Completely processed, then all quantities have been delivered and hence outstanding quantity is zero
3) If the value is 'B' = Partially processed, then using VBFA table identify all the deliveries for this line and then using LIPS table find out the total delivered quantities.
Regards,
Pratheb
Similar Messages
-
Report for Purchase orders and deliveries
Hi all,
Is there any report in SAP that gives me the list of purchase orders and the deliveries associated with those PO's.
Please advise.
Thanks in advance
SruthiHi,
What kind of delivery are you looking for ??
If it's inbound delivery, use VL06I tcode & for outbound, try VL06O
Thanks & Best Regards,
Devendra Gaware
PS - Reward if found useful. -
Table for process order and planned order in apo
I would like to know the table for stratagy profile for particular process order and planned order.
in /sapapo/rrp3 there is one filed RECEIPT/Reqt.Element ( process order ) for this field which table it is coming and i required particular strategy profile for that process order .
Please help me the table in apo.Hi Venkat,
This value is stored in structure /SAPAPO/RRP_ORDREQ_STR
under the field name EXTRA.
You can check the details of the same in transaction se11
Regards
R. Senthil Mareeswaran. -
Table for PO order and material document link
Hello,
I want to extract PO order and respecitive material documents ( IR , GR docs.)
Can you give table(s) names ?
Thanks,
IshakHi ,
You can use 2LIS_02_ITM ,2LIS_02_SCL DataSource you also check the following DataSources
2LIS_02_SCL Tables EKKO, EKBE, T001, T001W, EKET, EKPA.
2LIS_02_HDR Tables EKKO, EKBE, T001, EKPA.
2LIS_02_ITM Tables EKKO, EKBE, T001, T001W, EKPO, TMCLVBW, T027C, ESSR, T147K, T147
2LIS_02_SCN Tables EKET, EKES, EKPO.
2LIS_02_CGR Tables EKBE, EKES, EKPO.
2LIS_02_SGR Tables EKET, EKBE, KKPO
Thanks
REddy -
Table for Purchase Order and Non Purchase order history
Hi,
Could you please share me the table name for getting the Purchase order history and Non purchase order history because this is a client requirent.
I have gone through this tables but not getting exact data i.e. EKPO,EKKO,EKNE...
please share with me the exact Table name to get all the Purchase order history and not purchase order history..
Thanks in advanceHi Mallikarjun,
Where did you find the non po info?
Thanks,
Neha -
Data Validation for SD Sales order and Deliveries
Hello All,
We activated the data flow for SD sales Order and Deliveries for Infocubes 0sd_co4 and 0sd_c05 and there correspoding datasources.
I have 2 queries
1. How to validate data for BI SD sales order with ECC.
2. How to validate data for BI SD Deliveries data with ECC.
Kindly help, <removed by moderator>.
Thanks,
Rakesh.
Edited by: Siegfried Szameitat on Jun 21, 2011 12:51 PMHi Rakesh,
You have to check the tables in R3 and then compare with the Datasources in BW.
For Examples
VBAK table in R3 for Sales Order on BW-2LIS_11_VAITM
VBRK table in R3 for Billing iin BW-2LS_13*
Check for that day how many sales order were there in VBAK table and there in BW.
Rgds
SVU123
Edited by: svu123 on Jun 21, 2011 8:19 PM -
Fullfil sales order and deliveries are still appearing in MD04.
Hello Experts
After an upgrade Ehp6.4 to Ehp6.6 the fullfil sales order and deliveries are still appearing in MD04.
We runned SDRQCR21 and released the documents from MD04 but when the users create new sales orders and deliveries and completed them the reservation does not disappear from MD04.
My Availability Check is CH
Check.rule (SD order) and (SD delivery)
Somebody could tell me how can I solve this issue.
Thanks for you helpPlease check the document status in VBUK or VBUP table may some of the documents partially PGI'id
Also please refer the below document which is very helpful.
MD04: Problems with sales orders
thanks,
srinu. -
Copy Control between Sales Orders and Deliveries
Hi Gurus,
please can you tell me why copy control between Sales Order and Delivery doesn't work?
At header level, into copy control, we can set 2 requirement routines, one as general requirement for copying (TVCPL-AUBED) and the other one as requirement for grouping orders into deliveries (TVCPL-AUZUS).
At header level we can also set a routine for data transfer to define how data are passed from Sales Order header to Delivery header (TVCPL-GRUAK).
Then we can set routines at item level, one as requirement (TVCPL-AUBED) and one as data transfer (TVCPL-GRUAP).
When delivery is created with VL10A transaction, at header level only the first general requirement routine is used (FV50B***). Grouping requirement is not used (we also set a break point and the program is not passing into this routine).
Then it is used the requirement routine at item level (FV50B***).
Please can you tel me how we camake working the routine for grouping requirement at header level?
Thank you very much.
Kind Regards
AndreaHi, we used standard routine even if to be sure we run also the generation report you mentioned.
Please any other suggestions?
Thank you very much.
Kind Regards
Andrea -
BAPI KPF6 POST PLAN COST FOR INTERNAL ORDER AND COST ELEMENT
Hi all gurus,
I would like to use in a custom report a BAPI/Function Module that help me to simulate KPF6 in order to post planning costs for internal order and cost element (layout 1-401).
So the input should be:
1) Version
2) period from
3) periodo to
4) year
5) internal order n.
6) cost element n.
7) value
I found a lot of BAPI but don't know the correct one and how to use it (example how to fill the input value).
Can anyone help me on that?
Kind RegardsIn additio to the previous I found the BAPI_COSTACTPLN_POSTPRIMCOST but don't know if it's the correct one and how to use it (some example fitting the my case will be very appreciated).
If the quoted BAPI is correct.
I tested it filling all fields as following:
HEADERINFO:
CO_AREA=FFCA
FISC_YEAR=2008
PERIOD_FROM=001
PERIOD_TO=012
DOC_HDR_TX='blank'
INDEXSTRUCTURE:
OBJECT_INDEX=000001
VALUE_INDEX=000004 (hope this point at Interna Order)
ATTRIB_INDEX=000000
COOBJECT:
OBJECT_INDEX=000001
ORDERID=ZO53-08IMZ
TOTVALUE:
VALUE_INDEX=000004
COST_ELEM=3224048
FIX_VALUE= 200,0000
DIST_KEY_FIX_VAL=2
The Return table is set to 0. Nothing happens.....I suspect something related to indexstructure or index is wrong..
Could anyone help me on that?
Kind Regards -
Tables for purchase order history
what r the tables for purchase order history.
thanks in advanceHi Srinivas,
Check out the link for detail PP module and tables.
http://www.sap-img.com/sap-pp.htm
Hope this helps.
Manish -
Can you please tell me what is the TABLE for 'Work Order'?
Regards,
Subhasishhi Subhasish Ganguly,
these are the tables of worked order which used in work order make and udates
AFIH, AUFM, PMCOQT, PMFLAGS, AFFL, AFKO, AFPO, AFVC .............
Hope i will help u.
with regard
chetan vishnoi -
What is the table for inbound delivery and PO
Hello,
I did one inbound delivery with reference to PO, the SD Documnet Category:7(Shipping Notification/Delivery)
I tried in LIKP,EKBE tables for Inbound delivery and PO relation.
I didnot find, Can i have the table name for findinh the PO and Inbound delivery in one table.
I want to fetch these two documents in to reports.
With regards
LakkiI am sorry. I misunderstood your requirement. Please ignore my earlier post on this.
But do consider the below option :
You can get both Purchase Order as well as Inbound Delivery details in LIPS.
LIPS-VGBEL = Reference Document ( In this case it would be PO )
Hope this time it helps you. -
Table for Sales order Cost Est?
Cost estimate data for sales orders used to be kept in KEKO and KEPH -
Now that we've upgrade to 5.0 - there are only product cost estimates.
Anybody know the tables for sales orders?
thanksDear Althea,
please check with this tables.
VBAG Sales Document: Release Data by Schedule Line in Sch.Agrmt.
VBAK Sales Document: Header Data
VBAP Sales Document: Item Data
VBBE Sales Requirements: Individual Records
VBBS Sales Requirement Totals Record
VBDATA Update data
Regards
Mangal. -
Object table for production order
Hi all,
I want to create a print program to create a barcode label (sapscript) triggered out of a shop (production) order.
I know for example for deliveries, all delivery data are stored into the NAST table.
Is there a similar table for production order that holds the necessary data?
Thanks
AnneHi,
Tables for production order
AUFK Production order headers
AFIH Maintenance order header
AUFM Goods movement for prod. order
AFKO Order header data PP orders
AFPO Order item
RESB Order component
AFVC Order operations
JEST Object status
AFRU Order completion confirmations
Regards,
Vishal -
Table for purchase order status
Hello friends,
There's a tab STATUS in purchase order (tcoe ME21N).
I can't find a table which contains theses statuses.
Anybody knows what's the table for purchase orders status ??
Regards,
BahiaHi
PO status is stored in Structure not in the table.
Please use the List displays to get the information like ME2N,ME2L, ME2M, ME2K etc
You can also get the information from the table EKKO, EKPO, EKET,EKBE
Hope it helps
thanks/karthik
Maybe you are looking for
-
Error import / export in console standalone
hai all, error import / export in console standalone iam logged in 9i console standalone pc not connected any other pc. unable to import or export or load any database because the error shows that only on OMS mode is possible how can import or export
-
Apogee miniDAC and Sound output
There is no sound output from the Apogee miniDAc after the MacPro (2013) awakens from sleep. Sound output does occur if the internal Mac Pro speakers are selected. A restart will allow the Apogee miniDAC to function normally. In searching the threads
-
Dear Pros, Project explanation: Pair of pix firewall configured as failover.The outside of the pix pair connected to the internet gateway router 3825.Inside of the pix pair connected to the core switch ports configured with the vlan.The configuration
-
Broken Preset Alias in Preset folder
Have just added a small ssd to my computer as an OS boot disc and had to move my home folder to what was my old boot disc Upgrades to illustrator and other apps whent fine but I cannot launch Indesign lots of things missing a quick look i
-
Same asset posting in different currencies?
Hi, I have to create asset detail report. I wanna know that can same asset be posted in different currencies? aand can same asset have multiple cost centers???