Table for tcode me61
Hi,
I have to create a report in which i have to take fields from the tcode ME61 and when i check the technical settings of it ,it got the table RM06L which i s flat structure.
In which table can i get these fields data of this structure.
plzz provide me guidelines for it.
Hi
Check the below tables
ELBK Vendor Evaluation: Header Data
ELBM Vendor Evaluation: Material-Related Item
ELBP Main Criterion for Vendor Evaluation
Reward if found helpful.
Regards,
SB
Similar Messages
-
Table for tcodes for a role at object level
Hi Expert,
In production we have one role that doesnot have any tcodes at menu level.We are able to find tcodes at object level s_tcode.
I have tried in agr_tcodes table i am getting zero tcods for that role.
Is there any way to find out tcodes for particular role which is maintained in s_tcode object.
Thanks,I know you already got the answer from akshay..Still wonder why the thread is still open.. I could not resist my self to say few words....
AGR_TCODES - Gives transaction that is added in role menu and appear in S_TCODE with standard status.
AGR_1251 (with role name and S_TCODE) - Gives you above as well as manually added S_TCODE values.
Also keep eye in the status for S_TCODE in output of AGR_1251 (Rest for you to explore) so no need to enter the role manually to see whether the object is added manually or standard....
Arpan -
Table for tcode Y... created with se43
Hi,
i change the sap-menu with se43 and insert an own abap.
The system creates a new tcode Y... .
When i look into table TSTC i find the tcode wich is created with SE43 with the text of the menu,
but not with the abap-name.
Where can i find the relation between tcode Y... and the abap?
Does anyone knows the table?
thanks.
Regards, DieterHi
U should check your Y transaction by SE93.
In generally when the system generates an Y transaction, it generates a transaction runs the standard transaction START_REPORT having as default parameter the report it needs to run.
So it means the system generates a "Transactions with parameters", the parameters can be got from table TSTCP
Max -
Table name for Tcode: DC10
Hi All,
Can anyone tell me the name of the table for which table maintenence generator is created with Tcode:DC10?
I don't have autherization to excute taht tcode. so i am unable to find it.i need to create the same table.
i tried to debug FM TRANSACTION_CALL but couldn't find.
Regards,
Oorvihi,
i think you are looking for view name: V_TDWA_1
ags. -
Give me some PP important tables and Tcodes for abapers
give me some PP important tables and Tcodes for abapers
thank you,
Regards,
Jagrut Bharatkumar Shukla10 Production Planning (PP)
10.1 Work center
CRHH Work center hierarchy
CRHS Hierarchy structure
CRHD Work center header
CRTX Text for the Work Center or Production Resource/Tool
CRCO Assignment of Work Center to Cost Center
KAKO Capacity Header Segment
CRCA Work Center Capacity Allocation
TC24 Person responsible for the workcenter
CRCO Allocation of costcentre to workcentre
S022 Order Operation Data for Work Center
10.2 Routings/operations
MAPL Allocation of task lists to materials
PLAS Task list - selection of operations/activities
PLFH Task list - production resources/tools
PLFL Task list - sequences
PLKO Task list - header
PLKZ Task list: main header
PLPH Phases / suboperations
PLPO Task list operation / activity
PLPR Log collector for tasklists
PLMZ Allocation of BOM - items to operations
10.3 Bill of material
STKO BOM - header
STPO BOM - item
STAS BOMs - Item Selection
STPN BOMs - follow-up control
STPU BOM - sub-item
STZU Permanent BOM data
PLMZ Allocation of BOM - items to operations
MAST Material to BOM link
KDST Sales order to BOM link
10.4 Production orders
AUFK Production order headers
AFIH Maintenance order header
AUFM Goods movement for prod. order
AFKO Order header data PP orders
AFPO Order item
RESB Order componenten
AFVC Order operations
AFVV Quantities/dates/values in the operation
AFVU User fields of the operation
AFFL Work order sequence
AFFH PRT assignment data for the work order(routing)
JSTO Status profile
JEST Object status
AFRU Order completion confirmations
PRTs voor production orders
AFFH PRT assignment data for the work order
CRVD_A Link of PRT to Document
DRAW Document Info Record
TDWA Document Types
TDWD Data Carrier/Network Nodes
TDWE Data Carrier Type
10.5 Planned orders
PLAF Planned orders
10.6 KANBAN
PKPS Kanban identification, control cycle
PKHD Kanban control cycle (header data)
PKER Error log for Kanban containers
10.7 Reservations
RESB Material reservations
RKPF header
10.8 Capacity planning
KBKO Header record for capacity requirements
KBED Capacity requirements records
KBEZ Add. data for table KBED (for indiv. capacities/splits)
10.9 Planned independent requirements
PBIM Independent requirements for material
PBED Independent requirement data
PBHI Independent requirement history
PBIV Independent requirement index
PBIC Independent requirement index for customer req. -
Maintenance Dialog for T25* Tables in Tcode KES1
Hello,
I am getting an error saying there is no Maintenance Dialog for T25* tables in KES1 Transaction. Please let me know how to go ahead and solve this issue.
Thanks very much in Advance.
regards,
MaheshHi,
I am also getting the same error "Maintenance Dialog for T25* Tables in Tcode KES1"
Did anybody have any solution for this.
Regards,
Mohan -
Table or Tcodes for getting overall FREIGHT of a month?
hi Experts,
i always maintan Freights during Billing in VF01, and finally how can i check the total amount of Freights for any particular month and for any particular Plant, can u please sugges any Table or Tcode , so that i can check the total amount of freight of any particular month.
thanks in advance.Do you want to get the freight from CO-PA report or get them from G/L account line item report?
If the freight cost is impute cost, i suggest you use CO-PA reports with help of CO experts.
If you accrual the freight cost, then you can get the information from G/L line item reports.
Flex Yang -
Tcode to fill setup tables for application 0CS( Customer Service)
Dear Experts,
i have to fill the setup tables for the datasource 2LIS_18_I0TASK.
the datasource comes under the appilcation 0CS( Customer Service).
when i am trying to fill the setup tables through the tcode SBIW i am not able to find the respective appilcation.
Could you please let me know the transaction to fulfill the same.
Regards,
Sunil...Hi SunilKumar Bolle,
For filling setup tables for 0CS Data Sources Use the T-Code- OLISBW, or use the path SBIW->Settings for Application-Specific DataSources (PI)->Logistics->Managing Extract Structures->Initialization->Filling in the Setup Table->Application-Specific Setup of Statistical Data->Service Management - Perform Setup
The only way to say thanks in SDN is to assign Points. -
How to find Related Tables for the Tcode given.
How to find Related Tables for the Tcode given. (master data)
Thanks in advance.Hi Sridhar,
Welcome to SDN.
The tables for a given transaction can be seen in the transaction SE80.
First goto SE93.
Give ur Tcode and find the program name.
Now goto SE80. select program in the first dropdown and give the program name in the second box. U can find the list of tables used.
One more way is : use ST05.
and One more is using FM 'get_tables'
Thanks,
Shailaja
Edited by: Shailaja on Jul 11, 2008 12:33 PM -
Table for Ship to Party for Tcode VA03
hii Experts,
Can anyone plz tell me the Table for Ship to Party (kunnr) corresponding to VBELN?
Regards,
ApoorvHi,
For a VBLEP get VKORG,VTWEG,SPART, from VBAK and then check KNVP.
Regards,
Himanshu -
Process chain tables and tcodes
Hi frinds,
can any one send me the process chain tables and tcodes . plzz
regards,.
rajesh
my mail id is [email protected]Hi Rajesh,
Process chain tables:
RSPC_BUFFER Shared Buffer for Processes (Esp. Customer
RSPC_MONITOR Monitor individual process chains
RSPCABAPASYNC Logging for ABAP Processes(Synchronously a
RSPCCATEGORY Process Type Categories
RSPCCATEGORYT Texts for Category
RSPCCHAIN Process chain
RSPCCHAINATTR Attributes for a Process Chain
RSPCCHAINEVENTS Multiple Events with Process Chains
RSPCCHAINT Texts for Chain
RSPCCOMMANDLOG System Command Execution Logs (Process Cha
RSPCENQUEUE Dummy Table for Runtime Locks of a Process
RSPCEXOR Excluding Or: Log Table
RSPCINFO Special Values for Communication between P
RSPCINFOT Special Values for Communication between P
RSPCINSTANCE Generic Instance Storage
RSPCINSTANCET Texts for Generic Instance-Storage
RSPCLOGCHAIN Cross-Table Log ID / Chain ID
RSPCLOGCROSS Cross-Table Log ID Old / Log ID New
RSPCLOGS Application Logs for the Process Chains (G
RSPCPROCESSLOG Logs for the Chain Runs
RSPCRUNVARIABLES Variables for Process Chains for Runtime
RSPCTRIGGER Variants for the Trigger Processes
RSPCTRIGGERT Texts for the Trigger Variants
RSPCTYPESDEP Dependencies for Processes
RSPCTYPESPROC Attributes of BW processes (RSSM)
RSPCVARIANT Generic Variant-Storage
RSPCVARIANTATTR Attributes of a Process Variant
RSPCVARIANTT Texts for Generic Variant Storage
Regards,
R.Ravi -
Hi Friends,
I am facing problem while developing BDC for tcode F150. The last action i.e. scheduling for particular dunning date is not getting executed in my BDC.
I am also pasting the end part of my BDC recording. Please review it and advise.
PERFORM bdc_dynpro USING 'SAPLF150_JOBS' '1000'.
PERFORM bdc_field USING 'BDC_CURSOR'
'F150V-STRZT'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=JOBS'.
PERFORM bdc_field USING 'F150V-STRDT'
rdate.
PERFORM bdc_field USING 'F150V-XSTRF'
'X'.
select single SPLD into p_out from USR01 where bname = sy-uname.
perform bdc_field using 'ITCPO-TDDEST'
p_out.
CALL TRANSACTION 'F150'
Thank you,
Swapnil
Edited by: Swapnil Tawade on Sep 22, 2008 3:15 PMHi,
If u want it for some specific plants then before populating data to bdcdata internal table check the conditions for which the plant fields required values to be passed and if the condition is satisfied then pass the plant field to bdcdata table . If the condition is not satisfied then dont pass that plant field to bdcdata table bcoz if u r not passing any field to bdcdata table then that field is going have default values.
Regards,
Shafi -
I am looking to see whether org level restriction and cost center/fund center level restriction is possible for certain set of transactions.
I am using USOBX table for this analysis. This table has a check flag field ( same as in SU24) which says whether the Tcode (program) does the authority check for certain auth objects. Example- X (checked but not maintained in USOBT). This table pulls up several authorization objects under the 'X' category. However, when I do the System trace for the same tcode, all the objects (marked as X) are not captured. Instead only a few are captured.
Can we rely on the USOBX data or should we do system Trace for every tcode. I am just pulling a report and not creating roles at this point. So trace is time consuming. But data reliability is equally important.
My objective is to verify whether org level and cost center/fund center level restriction is possible or not for some tcodes.
Do you have any suggestion to achieve this faster (through USOBX or any other means)?
Thanks in advance
KeeI would suggest you to check USOBX_C and USOBT_C instead of USOBX and USOBT as it will have your customization as well and not just the standard ones given by SAP.
Also when check field is X ...it means the object is checked but not maintained for the t-code as you already said but I am not sure how much it will help you as the they will not be pulled by PFCG when you are creating the role until you change the object to Check / maintain . When you do that the check field will be Y and not X. So basically it is the Y one which you need to see.
Going for trace is time consuming for every t-code and I am not sure if it really needed. When your roles are in testing phase and are tested by the functional team or the team which needs it and if they are missing some object, you can run a trace and find the missing object....
I am not sure on what basis you want to change some field to Org level ...but typically it is done if you want to do segregation of roles based on these org level. There could be various other reasons and it is better to talk to your functional counterparts before changing a field to Org level.
for ex : If you want to segregate on company code, you will create co. code as Org level and create roles for different company code. -
How to block a single table for a single user
Hi all.
I want to block a single Z table for a single user. How to do this? If he/she tries to display data using SE16 or SE11 Tcode he/she should get an error message.
Regards,
Prajwal K.Hi Prajwal,
We can use the function modules ENQUEUE_E_TABLE for locking tables and the function module DEQUEUE_E_TABLE for unlocking tables. With this method, we don't need to lock objects in order to lock the tables. In other words, any table can be locked/unlocked using these function modules.
Check this sample code:
*Locking Table*
data:
varkey like rstable-varkey.
varkey = sy-mandt.
locking the tables............................
call function 'ENQUEUE_E_TABLE'
exporting
MODE_RSTABLE = 'E'
tabname = 'MARA'
varkey = varkey
X_TABNAME = ' '
X_VARKEY = ' '
_SCOPE = '2'
_WAIT = ' '
_COLLECT = 'X'
exceptions
foreign_lock = 1
system_failure = 2
others = 3.
Hope this helps you.
Regards,
Chandra Sekhar -
Problem in bdc session method for tcode FS00
Hi Experts,
problem in bdc session method, when i run this program no output is shown.
Even it is not calling the transaction.
code as follows.
*& Report Z_GL_MASTER
*& CATEGORY = BDC.
*& DESCRIPTION = UPLOADING G/L MASTER RECORDS.
*& TECHNICAL CONST = FRANCIS REDDY.
*& FUNTIONAL CONST = FICO.
REPORT Z_GL_MASTER.
*& Internal Table
DATA : BEGIN OF IT_UPLOAD OCCURS 0,
SAKNR LIKE GLACCOUNT_SCREEN_KEY-SAKNR, " ACCOUNT NUMBER.
BUKRS LIKE GLACCOUNT_SCREEN_KEY-BUKRS, " COMPANY CODE.
KTOKS LIKE GLACCOUNT_SCREEN_COA-KTOKS, " ACCOUNT GROUP.
XPLACCT LIKE GLACCOUNT_SCREEN_COA-XPLACCT, " P&L STATEMEMENT.
GVTYP LIKE GLACCOUNT_SCREEN_COA-GVTYP, " P&L STATEMENT TYPE.
XBILK LIKE GLACCOUNT_SCREEN_COA-XBILK, " BALANCE SHEET STATEMENT
SHORT LIKE GLACCOUNT_SCREEN_COA-TXT20_ML, " SHORT TEXT.
LONG LIKE GLACCOUNT_SCREEN_COA-TXT50_ML, " LONG TEXT.
WAERS LIKE GLACCOUNT_SCREEN_CCODE-WAERS, " ACCOUNT CURRENCY.
XSALH LIKE GLACCOUNT_SCREEN_CCODE-XSALH, " ONLY BALANCES IN LOCAL CURRENCY.
MITKZ LIKE GLACCOUNT_SCREEN_CCODE-MITKZ, " RECONCILATION ACCOUNT FOR ACCOUNT TYPEGLACCOUNT_SCREEN_CCODE-MITKZ
XOPVW LIKE GLACCOUNT_SCREEN_CCODE-XOPVW, " OPEN ITEM MANAGEMENT.
XKRES LIKE GLACCOUNT_SCREEN_CCODE-XKRES, " LINE ITEM DISPLAY.
ZUAWA LIKE GLACCOUNT_SCREEN_CCODE-ZUAWA, " SORT KEY.
FSTAG LIKE GLACCOUNT_SCREEN_CCODE-FSTAG, " FIELD STATUS GROUP.
XGKON LIKE GLACCOUNT_SCREEN_CCODE-XGKON, " RELAVENT CASH FLOW.
END OF IT_UPLOAD.
*& Internal Table FOR BDC DATA.
DATA : IT_BDCDATA TYPE BDCDATA OCCURS 0 WITH HEADER LINE.
*& DATA DECLARATIONS.
DATA : V_FILE LIKE RLGRAP-FILENAME.
*& SELECTION SCREEN.
PARAMETER : P_FILE LIKE V_FILE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
PERFORM GET_FILENAME.
START-OF-SELECTION.
PERFORM UPLOAD_DATA.
PERFORM BDCDATA_OPEN.
PERFORM BDC_POPULATE.
PERFORM BDC_CLOSE.
*& Form GET_FILENAME
form GET_FILENAME .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_FILE'
IMPORTING
FILE_NAME = P_FILE.
endform. " GET_FILENAME
*& Form UPLOAD_DATA
form UPLOAD_DATA .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = P_FILE
FILETYPE = 'DAT'
TABLES
data_tab = IT_UPLOAD.
endform. " UPLOAD_DATA
*& Form BDCDATA_OPEN
FORM FOR BDC_OPEN_GROUP.
form BDCDATA_OPEN .
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = 'GLMASTER'
HOLDDATE = SY-DATUM
KEEP = 'X'
USER = SY-UNAME.
endform. " BDCDATA_OPEN
*& Form BDC_POPULATE
POPULATING BDC DATA .
form BDC_POPULATE .
loop at it_upload.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=ACC_CRE'.
PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_KEY-SAKNR'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_KEY-SAKNR' IT_UPLOAD-SAKNR.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_KEY-BUKRS' IT_UPLOAD-BUKRS.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=2102_GROUP'.
PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_COA-KTOKS'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-KTOKS' IT_UPLOAD-KTOKS.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-XPLACCT' IT_UPLOAD-XPLACCT.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=2102_BS_PL'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-GVTYP' IT_UPLOAD-GVTYP.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-XBILK' IT_UPLOAD-XBILK.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_COA-TXT20_ML'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-TXT20_ML' IT_UPLOAD-SHORT.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-TXT50_ML' IT_UPLOAD-LONG.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=TAB02'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-WAERS' IT_UPLOAD-WAERS.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XSALH' IT_UPLOAD-XSALH.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-MITKZ' IT_UPLOAD-MITKZ.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XOPVW' IT_UPLOAD-XOPVW.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XKRES' IT_UPLOAD-XKRES.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-ZUAWA' IT_UPLOAD-ZUAWA.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=TAB03'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-FSTAG' IT_UPLOAD-FSTAG.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XGKON' IT_UPLOAD-XGKON.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FS00'
TABLES
dynprotab = IT_BDCDATA.
endloop.
endform. " BDC_POPULATE
*& Form BDC_CLOSE
FORM FOR CLOSING BDC_GROUP
form BDC_CLOSE .
CALL FUNCTION 'BDC_CLOSE_GROUP'.
endform. " BDC_CLOSE
*& Form BDC_SUB1
FORM FOR BDCDATA.
form BDC_SUB1 USING A B C.
CLEAR IT_BDCDATA.
IT_BDCDATA-DYNBEGIN = A.
IT_BDCDATA-PROGRAM = B.
IT_BDCDATA-DYNPRO = C.
APPEND IT_BDCDATA.
endform. " BDC_SUB1
*& Form BDC_SUB2
text
form BDC_SUB2 USING A B.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = A.
IT_BDCDATA-FVAL = B.
APPEND IT_BDCDATA.
endform. " BDC_SUB2
Points will be rewarded.
Thanks in advance.
Francis.Hi,
Once the program is executed..It will a BDC session..
THen you have to use the transaction SM35..To process the BDC session..
Thanks,
Naren
Maybe you are looking for
-
Payment run getting released ERROR
When trying to do the payment run I have executed the following steps: 1. Entered the parameters 2. Proposal run has been done 3. Proposal has been edited 4. After the above steps when I make a payment run , the status tab shows Parameters
-
Old generation Apple TV loses wireless connection
I have an older gen Apple TV (silver). Recently it upgraded the software...can't remember if it's ever been updated prior to that. I've had it for at least 3 years...no problems connecting to the internet. Now it loses connection once per day...go
-
Hi all I'm very new to Aperture, but not so new to editing digital photographs. Previously I used Photoshop entirely and had my own kind of manual workflow. But that was very slow going taking months to edit a small amount of photo's and distributing
-
My iPod touch shows my podcasts "grayed out". They're there, but I can't play them. My older iPod plays them fine like normal.
-
Hi People, Just updated to CC 2014 and the icon associated with AE projects is no longer present. Looked in all the obvious places (Registry and Default Applications) to no avail. Choosing the Open With option for a project doesn't have After Effects