Table property CellFGColor missing in LabVIEW8?

Hi all!
LabVIEW8 keeps me surprising all the day:
For a table control, I can't find the property to set the foreground color of the cell. Earlier versions of LabVIEW (at least v 5.1.1) there was a "CellFGColor" property available.
In LabVIEW8 list of properties, there is only background color (CellBGcolor) available. It seems that new NI has forgotten foreground property somewhere during reorganising properties for LV8...
Where can I find the property to set the cell foreground color programmically???
Thanks!
Wirer

The property which you will use in LabVIEW 8.0 is the Cell Font Color
rather than CellFGColor. This property is found in the list
at Active Cell : Cell Font : Color. The new
property configuration also gives you control over a wide range of Font
properties which were not available in prior versions of LabVIEW.

Similar Messages

Tables DBMSHP_FUNCTION_INFO, DBMSHP_PARENT_CHILD_INFO, DBMSHP_RUNS missing

Background:
In sqldeveloper 3.1.07 I have a number of views that concatenate the data from several fields to reduce multiple rows to a single row of comma delimited numbers. For example 10 records for Item #1 might contain a list of 10 different assessment files. I reduce them down to A12345, A22637, A32597, A25896, etc. I do the same with other fields, such as mineralization or whatever..
This system is up on our mainframe and has run perfectly for several years and there has not been a problem generating this report till now. The powers that be have decided to lock down the system and now our report tables cannot be deleted or created as necessary. (The views gather the data, the final result is a table) To modify anything has become a tiresome political issue. However, since I have access to the data and MY code (I was the author and maintainer till now), I exported all the data and code and installed it on my local machine - where it was originally developed and where sqldeveloper was used to generate all the views, etc.
The Problem:
To cut to the chase: my concatenation views work perfectly on the mainframe but when I try to run them on my local machine the views are blank. They create properly - no errors, the concatenation function and types compile perfectly - no errors thrown - no messages - no visible warnings - and NO DATA IN THE VIEWS.
When I finally cllicked on Profiles I found the following WARNING
*"Required tables DBMSHP_FUNCTION_INFO,DBMSHP_PARENT_CHILD_INFO,DBMSHP_RUNS missing"*
So my question is -
1) how do I get these tables installed on my local stand alone computer and
2) why does this new version of SQLDEVELOPER need them - or to put it in a different way - why is this the first time in 4 years that I need these tables?
3) why wasnt there an appropriate error message or visible warning.
Any help would be appreciated. Thank you
More Background:
The code for the function and type were borrowed from "somewhere" 4 years ago - the rest is pretty simple. No changes are necessary for any of this as it works perfectly - it is only presented for further information. Database is 11gR2
The code for the view:
CREATE OR REPLACE FORCE VIEW "MDD"."Q_AFILES" ("MDD_NO", "AFILE")
AS
( SELECT mdd_no ,
CONCAT_ALL(CONCAT_EXPR(afile_no, ', ')) AFILE
FROM mdd_afmddcr
GROUP BY mdd_no
The concat function:
create or replace
FUNCTION "CONCAT_ALL"(
ctx IN concat_expr)
RETURN VARCHAR2 DETERMINISTIC PARALLEL_ENABLE AGGREGATE USING concat_all_ot
The type:
create or replace
TYPE "CONCAT_ALL_OT" AS OBJECT (
str VARCHAR2 (4000),
del VARCHAR2 (4000),
STATIC FUNCTION odciaggregateinitialize (
sctx IN OUT concat_all_ot)
RETURN NUMBER,
MEMBER FUNCTION odciaggregateiterate (
SELF IN OUT concat_all_ot,
ctx IN concat_expr)
RETURN NUMBER,
MEMBER FUNCTION odciaggregateterminate (
SELF IN concat_all_ot,
returnvalue OUT VARCHAR2,
flags IN NUMBER)
RETURN NUMBER,
MEMBER FUNCTION odciaggregatemerge (
SELF IN OUT concat_all_ot,
ctx2 concat_all_ot)
RETURN NUMBER);
the Type expression:
create or replace
TYPE "CONCAT_EXPR" AS OBJECT (
str VARCHAR2 (4000),
del VARCHAR2 (4000),
MAP MEMBER FUNCTION f_map RETURN VARCHAR2);

>
The real answer to my question should have simply been - the concat function is not allowed in 11gR2 - LISTAGG s the appropriate replacement. Seems our server is only 10g and that's why it still works there. My local testbed is 11gR2
>
Those comments are so far off base I can't even imagine how you arrived at those conclusions.
1. You never mentioned a 10g system - you talked about a mainframe
>
This system is up on our mainframe and has run perfectly for several years
>
2. The Oracle concat function is still alive and well in 11g - nothing you posted shows you are using that function
http://docs.oracle.com/cd/E11882_01/server.112/e10592/functions033.htm#i77004
>
Purpose
CONCAT returns char1 concatenated with char2. Both char1 and char2 can be any of the data types CHAR, VARCHAR2, NCHAR, NVARCHAR2, CLOB, or NCLOB. The string returned is in the same character set as char1. Its data type depends on the data types of the arguments.
>
3. The CONCAT_ALL function that you posted is YOUR function, not Oracle's. It is a custom aggregate function written using the Data Cartridge extensions. That function will still work in 11g.
The concat function:
create or replace
FUNCTION "CONCAT_ALL"(
ctx IN concat_expr)
RETURN VARCHAR2 DETERMINISTIC PARALLEL_ENABLE AGGREGATE USING concat_all_ot
;Your questions were these
>
So my question is -
1) how do I get these tables installed on my local stand alone computer and
2) why does this new version of SQLDEVELOPER need them - or to put it in a different way - why is this the first time in 4 years that I need these tables?
3) why wasnt there an appropriate error message or visible warning.
>
Providing an answer of 'the concat function is not allowed in 11gR2' to those questions would have been absurd! The concat function has NOTHING to do with your missing tables.
I told you the reason your tables are missing. They are only created when you run the script I referred you to. Someone ran them on your current system and created hierarchical profiles that used those tables. You DID NOT run that script on 11g so the tables were not created but you tried to reference the profiles that used them and got the error message about the tables being missing.
All of your questions were answered and the answers have NOTHING to do with concatenation of any type.

Remove multi table property defined in Parent descriptor

I tried to remove a multi table property(which is defined in a parent descriptor) in a child, but it does not get removed.

<item-descriptor name="parent" ...>
     <table name="testTable" type="multi" id-column-name="id" multi-column-name="seq_num">
          <property name="testProperty" column-name="property1_id" data-type="map" component-data-type="string">
          </property>
     </table>
</item-descriptor>

<item-descriptor name="child" super-type="parent" sub-type-value="child" xml-combine="append">
     <table name="testTable" type="multi" id-column-name="id" multi-column-name="seq_num">
          <property name="testProperty" xml-combine="remove">
          </property>
     </table>
</item-descriptor>
Above code does not remove the property "testProperty" in child descriptor.
If i have a auxiliary table type, rather than multi table type, then it is working fine. Not sure why it is not working in multi table property.
Does anyone have any idea?
Thanks!!!

Hi,
xml-combine is applicable when combining two or more xml definition files.
When you say it worked for you for a table of type auxiliary, the properties are in same xml or in different xml files?
In your case, you are actually trying to override a property from parent item descriptor in a child item descriptor.
I would suggest to have the testProperty removed from the parent item descriptor and let the children item descriptors define the testProperty.
Hope this helps.
Keep posting the updates / questions.
Thanks,
Gopinath Ramasamy

Physical Model - Propagate table property "Tablespace" doesn't seem to be working in 4.0EA2

I'm to switching from v3.3.0.747 to 4.0EA2 but experiencing some issues.
In the physical model when I try to propagate the table property "Tablespace" for the remaining tables a silent error happens and as result the value is not propagated.
The error appears in the log file:
2013-09-24 16:31:31,776 [AWT-EventQueue-0] WARN PropertyWrapper - oracle.dbtools.crest.model.design.storage.oracle.v11g.TableProxyOraclev11g.setTableSpace(oracle.dbtools.crest.model.design.storage.oracle.TableSpaceOracle)
java.lang.NoSuchMethodException: oracle.dbtools.crest.model.design.storage.oracle.v11g.TableProxyOraclev11g.setTableSpace(oracle.dbtools.crest.model.design.storage.oracle.TableSpaceOracle)
at java.lang.Class.getMethod(Class.java:1624)
at oracle.dbtools.crest.util.propertymap.PropertyWrapper.setValue(PropertyWrapper.java:65)
at oracle.dbtools.crest.swingui.editor.storage.PropertiesPropagationDialog.applyTo(PropertiesPropagationDialog.java:353)
at oracle.dbtools.crest.swingui.editor.storage.PropertiesPropagationDialog.setProperties(PropertiesPropagationDialog.java:337)
at oracle.dbtools.crest.swingui.editor.storage.PropertiesPropagationDialog.access$400(PropertiesPropagationDialog.java:46)
at oracle.dbtools.crest.swingui.editor.storage.PropertiesPropagationDialog$11.actionPerformed(PropertiesPropagationDialog.java:300)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:2018)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2341)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:402)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:259)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:252)
at java.awt.Component.processMouseEvent(Component.java:6505)
However if I try to propagate the tablespace value for indexes this works fine.
Some ideas?
Thanks.

Hi,
Thanks for reporting this. I've logged a bug.
I'm afraid you won't be able to propagate Tablespaces on Tables until it's fixed.
David

Datastructure Item table property doesn't show views?

I am using Designer Editor version 2.0.24.2.0 and am on the Server Model Navigator under <app_name>->PL/SQL Definitions->Package Definitions-><package name>->Datastructures-><datastructure name>->datastructure items. I have created a datastructure item and am trying to define it by a view that exists in the repository. However, when I click on the "Table" property, the view does not show up on the resulting popup list (in fact it appears that no views do). Anyone have any suggestions or explanations?
Thanks.
Mark

Hi Bill,
As you will notice when taking a look on the SAP Business One menu items in the Modules menu / "Main Menu" you will see that only on the top level icons are displayed.
In order to have a consistent appearance of the solution (the application + what your Add-On adds to the UI) it makes sense that the application behaves that way.
Nevertheless the icons you specify will be displayed in the Modules menu's sub menus in the menu bar.
I think it is OK to have this in e.g. the Goto menu or the Data menu - as the application has icons there as well, but I am not convinced that there's too much benefit in adding icons to Add-On menu items - and having none for standard menu items...
HTH,
Frank

The Property Inspector is missing the V Space and H Space fields in DW6 - where did they go?

I just downloaded DW6. The Property Inspector is missing the V Space and H Space fields, therefore I am unable to add space around my images. Suggestions?

It is no longer available because the problem with that was that it applied spaces around the image rather than where the user actually wanted them. You now need to use CSS and apply margins and paddings and target exactly where you want them by using something like this:
img {
    margin-bottom: 0;
    margin-right: 0;
    margin-left: 0;
    margin-top: 0;
    padding-top: 0;
    padding-right: 0;
    padding-bottom: 0;
    padding-left: 0;
img {
     border: 0;
     padding: 0;
The second style is generic to set margin and padding for all four sides.
Good luck.

Change "Owner" table property

Hello,
I am using the last version of the JRC runtimes from CR4E to switch the datasources to JNDI. at run time It is working well, except by the fact of the queries taking the old (design-time configured) table prefixes. Looking at the report in designer, I can see that those prefixes are indicated in the u201COwneru201D table property for each table. No matter how I switch the sources (looping through the tables or using the replaceConnection method) those properties are not altered and then the queries end up pointing to the wrong schema.
Can anybody point me to how should I change the Owner property for all the tables?
Thanks in advance
Juan

Try changing the qualified name of the table: Table.setQualifiedName(<owner.tablename>)

External Table : property name="oracle.kv.parentKey"

Hi,
Base on external table example in version 2.0.23, I have major key + minor key as follow:
/user/user<i>@example.com/-/info/
When I changed the property oracle.kv.parentKey in the config file to be full majorKey instead of one part of the major key, there is no results
For example:
when the value of this property is: /user (the default in the example) - I got all KV pairs starting with /user prefix
but when I configure it to: /user/[email protected] which is the full majorKey I didn't get answers at all (although the KV exists).
Does this property support only first part of majorKey or may I misunderstand the concept?
Thanks in advanced,
YosiK

Hi YosiK,
The parentKey value in this context is treated the same as parentKey argument to the KVStore.storeIterator() methods. As described in the javadoc for those API calls:
parentKey - the parent key whose "child" KV pairs are to be fetched. It may be null to fetch all keys in the store. If non-null, the major key path must be a partial path and the minor key path must be empty.
So, in fact, the parentKey MUST NOT be a complete major key - it must be partial. There must be majorKey components following the parentKey that is specified. The subRange argument does interacts with this though. In the example, if you leave parentKey as "/user" but add a subRange parameter with value
"I/[email protected]/[email protected]/I" you would achieve the result that I think you originally anticipated.
- Mark

Where are my mobile service and database tables? They're missing from the Portal.

I've been using Azure for a couple of months. I just logged in and my mobile service is missing. And while my SQL database is still there, all the tables I created are gone. I received no email about them being removed and there's no log on the site that
indicates anything happened to them. My website also is there and appears to be working fine. I had a lot invested in the tables and mobile service. Can anyone help me figure out what is going on?

Hi
For this
subscription question I suggest you contact
support
team by creating a support ticket at http://www.windowsazure.com/en-us/support/contact/
Beacause only them
have the permission to help you fix your subscription issue.
Thanks.
Please mark post as answered if it helped!

FK shouldEngineer property check box missing

Browser > Relational Models > ... > Tables > <some table> properties: Engineer check box
Browser > Relational Models > ... > Tables > <some table> <some FK> properties: no Engineer check box
I believe there should be an FK "Engineer" check box to be consistent with the table properties or, alternatively, neither table or FK properties should have this check box. I.e. it can be set only in the "Engineer Relational to Logical" pane (for tables and references).
An aside: I don't know how these became unset for dozens of tables and FKs over the course of the last few months. Rather than set them manually in the engineer pane I scripted an en masse fix.
Another aside: an analogous case does not exist for logical to relational for there are "Engineer To" selections for both entities and relations. (Which argues against my aforementioned alternative of relying solely upon the "Engineer Relational to Logical" pane.)
Posts reviewed: engineer && ( foreign || fkey )
Version: Oracle SQL Developer Data Modeler 3.1.1.703

Similarly for columns (and probably other objects as well), no shouldEngineer property check box -- it may as well not be there for tables!

"Visual" Tables and Constraints are missing!!!

Hi all,
i drew my database diagram and deployed to the database. But the creation file accuse a few tables that were created and deleted in the drawing process. I mean, they are not in the diagram, but JDeveloper is seeing them somehow.
After deploying to the database, i imported these tables to a java classes diagram so jdev would create my beans automatically. What happens is that automatically a few constraints are gone now. If i go into the table properties, the constraints are there, but i cannot see them in the diagram.
How can i view all these missing objects?
Thanks to all.
Eduardo

Ok... the constraints i managed a way to make them be visible again. I edited each constraint and they appeared again. But the constraints i had a way to find them. That's no the case with the tables...
Still working on that.
thanks a lot

Table maintenance for HRUS_D2 missing in SRM 7.0

Hi All,
The table maintenance for HRUS_D2 is missing in SRM 7.0. Is there any other other way of maintaining substitue on a large scale by an administrator.
i know we can assign substitute form portal , but initially we want some substitute set in the system and currently i cannot maintain this table HRUS_D2. The table maintenance is active in ECC system but not in SRM system.
Any help or oss note would be appreciated.
Thanks
Iftekhar Alam

Hi Masa,
The report mentioned is useful if we have to set substitution individually. i wanted to do in a mass way for 100-200 users and SM30 for HRUS_D2 would have helped.
Not sure why SAP provide the table maintenance in ECC but not in SRM.
I have got a FM RH_UPDATE_SUBST_LIST_SERVER which i can use to update the substitution table in a mass way and it worked.
Thanks
Iftekhar Alam

Compare 2 tables and insert rows missing in each table.

I have a tough situation. I have two exact tables- one online and one offline database. I know that there are missing rows of data from each table, so I need to make a comparison of one table and insert rows that do not exist. I was thinking to try this, but it took over 3 hours to run and did not return anything:
insert into t
select * from t a
where not exists (select * from [email protected] b
where a.col1 != b.col1
and a.col2 != b.col2
and a.col3 != b.col3);
and it goes on for another 7columns.
The trouble I have is to include a date clause so that the query can be broken down into running only a few months of data comparisions at a time- the records go back 4 years to compare. Also is there a way to write this so that it will query both tables at the same time in order to speed things up- or is one table at a time the best advice? Each table has over 100 million records to compare, that's why I was hoping to use a date criteria since one column is date.
Let me know what you advise to make this work, I hope I was on the right track.

Not sure if the MINUS operator will perform better with your data set but;
SQL> create table t1 (some_id number, some_date date)
Table created.
SQL> create table t2 (some_id number, some_date date)
Table created.
SQL> insert into t1 values (1, trunc(sysdate))
1 row created.
SQL> insert into t1 values (2, trunc(sysdate-5))
1 row created.
SQL> insert into t1 values (4, trunc(sysdate-90))
1 row created.
SQL> insert into t2 values (1, trunc(sysdate))
1 row created.
SQL> insert into t2 values (3, trunc(sysdate-10))
1 row created.
SQL> insert into t2 values (5, trunc(sysdate-100))
1 row created.
SQL> select * from t1
   SOME_ID SOME_DAT
         1 07-07-30
         2 07-07-25
         4 07-05-01
3 rows selected.
SQL> select * from t2
   SOME_ID SOME_DAT
         1 07-07-30
         3 07-07-20
         5 07-04-21
3 rows selected.
SQL> insert into t1 (
   select some_id, some_date from t2 where some_date between sysdate-50 and sysdate
   minus
   select some_id, some_date from t1 where some_date between sysdate-50 and sysdate)
1 row created.
SQL> insert into t2 (
   select some_id, some_date from t1 where some_date between sysdate-50 and sysdate
   minus
   select some_id, some_date from t2 where some_date between sysdate-50 and sysdate)
1 row created.
SQL> select * from t1
   SOME_ID SOME_DAT
         1 07-07-30
         2 07-07-25
         4 07-05-01
         3 07-07-20
4 rows selected.
SQL> select * from t2
   SOME_ID SOME_DAT
         1 07-07-30
         3 07-07-20
         5 07-04-21
         2 07-07-25
4 rows selected.

Table Data Preview tab: Missing Filter Textbox + Drill Down Data Discovery

1 - With Oracle based tables, when I click them and the table preview loads with all the tabs, on the Data tab there is a Preview entry box. I do not see the same with SQL Server or MySQL based connections. Is there a way to enable it? Am I not looking hard enough or is this function only available for Oracle based tables?
2 - I'm having a hard time trying to search for an answer to this next question (too many false positives based on the terms I am using). In other tools I have used (namely DB Visualizer), when previewing data in the Table's Data tab, a user may 'drill down' through values by right-clicking the field and applying a filter from the pop-up (drop-down with the field names, usual SQL comparison operators and a text entry box). I see SQL Developer has something similar with a filter list, but it only seems to prompt values in the buffer (in order, no less) and only uses the = operator (no LIKE). Finally, I notice that this value is not even present in the Filter text box (if you wanted to edit it further, add more, etc). As with my prior question, am I missing some usability/functionality setting/config or does this feature simply not exist in the way the other tool employed it? This feature is what keeps the other tool installed on my machine.

Hi Jed,
1) Sorry, the tool just has fewer bells and whistles for non-Oracle database connections. You might try adding this as a feature request on SQL Developer Exchange.
2) The normal SQL operators such as LIKE, <, and so on, are supported for the individual column filters, but there are some quirks:
Re: Bug - column filter doesn't work in 3.1.05
Regards,
Gary
SQL Developer Team

Sybase Temporary tables Property

Hi,
Please let me know that what is the by default property of the temporary table created in Sybase .
For example in Oracle it is ON COMMIT DELETE ROWS.
Also, are they once created and can be used permanently ? or they are droped by their own.
Please advice

You probably should goto Sybase website and ask the question in Sybase forum.

Table property CellFGColo​r missing in LabVIEW8?

Similar Messages

Maybe you are looking for

Table property CellFGColor missing in LabVIEW8?