Table Row update in Adobe Interactive Form

Hi,
I have a table and i have an input field.When i enter % in input field then i need to write to Javascript so that all the rwos in a particular column should be updated with the input field %.Can anyone solve my problem

Issue Resolved by writing Javascript

Similar Messages

Update table after filling an adobe interactive form inside a workflow

Hi
I have the following workflow problem:
I made a webdynpro application that incudes an adobe interactive form. An user fill this form. After filling the form he will press the submit button. The data will be introduced in the custom table and a workflow will be started.
Inside the workflow, I attached the form filled by the user. After attaching it I introduce a user decision step in order to see the content of the pdf attachment, modify it and send again. So, the person that will execute the workitem has to open that pdf and fill some additional fields. The information should be updated in the table and then send to other persons. I don't know how to update the table with the new values that are inserted in the form in that decisional step and send the updated form to the other users.
Thank you in advance !
Iulia

Hi Iulia
You cannot do that through decision step with attachment. You have to do with task registation in t-code SWFVISU. so the work item will come to UWL once the approver clicks the work item it opens and entered his comments, You have to caputer the comments and pass these comments to the workflow container element from there you update to your custom table.
Regards
vijay

Table control in adobe interactive form ?

Hi,
Can we make a table control i.e. something like the same functionality that of table control in an adobe interactive form?
Thanks !!

it all depends on what you want to do.
In SFP, there is a table wizard you can use to create your basic table with headers/footers etc...
You can put buttons on your PDF with code behind them to ADD/DELETE rows dynamically.
for example:
data.Page2.parms.instanceManager.addInstance(1);
I have tables where a column would consist of input fields or radiobuttons or just about anything else you can imagine to put in a table.
But as Otto mentioned, you should elaborate more and tell us what you want to do with the table. If you're not afraid to jump into Formcalc/Javascript, you can do some quite complex activities in your form if you want to.

Drop down in dynamic table in the Adobe Interactive Form (Web dynpro ABAP)

Hi All,
I have scenario use drop down in dynamic table in the adobe interactive form (Using the button the dynamic table row will be increasing and decreasing).
Assume I Add five rows dynamically in the dynamic table. The Last column contains Drop down.
I have button in the adobe form.
Button Name = u201CSAVEu201D
Button type    = SAP Submit button (Native type u2013 I am Using ZCI).
While clicking save button, I need to store the dynamic table datau2019s to back end system. I can able to store the data to back end system. After form data getting saved those particular values need to display in the adobe form.
Here I am facing a problem.
I cannot able to view as a default value in the drop down, which I have selected some values after save operation I am not getting any values in the drop down as a default.
Example:
The dynamic table contains 5 rows (Each and every row Drop down contains one to ten values).
1)     I have selected second value in the Drop down (ROW1)
2)     I have selected fourth value in the Drop down (ROW2)
3)     I have selected fifth value in the Drop down (ROW3)
4)     I have selected seventh value in the Drop down (ROW4)
5)     I have selected third value in the Drop down (ROW5)
I press the save button that particular Drop down value gets saved in back end system and that particular values want display in the Drop down as a default value.
How to resolve this problem.
Regards,
Boopathi M

Hi,
Solve the problem .
I have created the New node for dropdown. also i have one node already for table.
The new node i bind to dropdown, the table same for table.
Its working fine
Boopathi M

SCROLL DOWN IN ADOBE INTERACTIVE FORM TABLE

Hi Experts,
Any possible for to keep scroll down option in adobe interactive form? If possible means please let me know.
Thanks,
Senthil Prabhu

hi,
My requirement, is to use dynamic drop down in dynamic table. I am using webdynpro abap.
i populated the value in drop down.
Its working fine but the problem is how to fill the default value in drop down. because i want to bind the default value which im getting specify value from the table.because each row
im getting different values, like first row
CAR
, that CAR want to fill as a default value in drop down and second row as
BIKE
that BIKE want to fill as default value in drop down ( example drop down contain car , bike , cycle).
In adobe form i binded like this
$record.DATANODE.DATA[*].DNA_RATING
i dont know whether this one is correct or wrong .
im getting default value as empty.
please give me some solution how to do this.its very urgent
thanks
hemachandran.

Adobe Interactive Forms displaying returned tables

can anyone help me display returned tables in adobe
interactive forms
i have an 2 adobe interactive forms, one for input
the other for output on 2 different views
the input form takes a few parameters, calls the
back end RFC and the
output form displays okay, but i just get the last
row from the table
i've tried binding 1 of the output table parameters to a drop down box and subform,the drop down box displays
one of the return parameters but will not drop down
whenever i include a subform i get a java error on
the output form with no display
i know there are several rows returned from testing the rfc inside abap workbench

Hi Dennis,
To display table in Adobe forms.
Follow these steps :
1. Insert one sub furm.
2. make its type to flow content and flow direction to Table in object property.
3. Insert another subform in above sub form and makes its type to flow content and flow direction to Table row.
4.In binding tab for this subform check the checkbox for "Repeat subform for each Data Item" and in min count you can specify at a time how much rows you want to display.
5. Now place your UI Elements for Data view into this sub form.
6. format these ui elements as you required.
Run application now u can see multiple rows in adobe forms, if you have multiple elements in your table node.
Let me know the status.
Regards,
Bhavik

How to binnding the data in the adobe interactive forms for making a table?

Hi, experts,
Function:
Through the sharing context node between adobe interactive form and a WDA for ABAP, display the data of the sflight_node in the ADOBE.
version:
Acrobat Reader 8.1.0
currently both of the SAP-ABA and SAP-BASIS SP level: 9
ADS : Successful.
The following is my action:
1.     Create a interface (Z_SFLIGHT_INTF) with a attribute node (SFLIGHT_NODE) that type is "sflight" using the transaction code "sfp"
2.     Create a form (Z_SFLIGHT_FORM) using the transaction code "sfp" with the interface Z_SFLIGHT_INTF.
3.     Trag the sflight_node in the Z_SFLIGHT_INTF to the form( Z_SFLIGHT_FORM).
4.     Open the layout tab in the form(Z_SFLIGHT_FORM), and create a table(table1). Click the table created just now, select the binding tab in the object tab, and in the Default Binding, select the SFLIGHT_NODE under the Z_SFLIGHT_FORM.
Problem 1:
Do you tell me whether is right for binding the context SFLIGHT_NODE using this way? If bind 3 context attributes in the sflight, how can I do it?
5.     Create a WDA for abap (ZZ_02_SFLIGHT), and create a view(MAINVIEW) using transaction code "se80" in the sap-gui with adobe interactive form. Set the templatesource(Z_SFLIGHT_FORM) in the adobe interactive form properties and saved, and then, datasource is "MAINVIEW_Z_SFLIGHT_FORM" automatically.
6.     But I only found the attribute SFLIGHT_NODE under the context node(Z_SFLIGHT_NODE), and I don't found the NODE ( SFLIGHT_NODE ) context in the context tab in the WDA for abap so that I don't set data to the context NODE (SFLIGHT_NODE).
Problem 2:
Do you tell me what can I do it so that I get the node SFLIGHT_NODE rather than attribute in the WDA for setting the data to the CONTEXT NODE (SFLIGHT_NODE)?
Thanks a lot.
Best regards,
Tao

Hi, experts,
You can reply back to me via e-mail if you think we should discuss this internally at [email protected] or [email protected]
Thanks a lot.
Best regards,
tao

Update values on an Adobe Interactive Form

My question refers to the thread posted back in 2004 which remains unanswered...
Thread: http'How to update values in Adobe form?
With ECC 6.00 (SP10) , assuming that the Webdynpro and Adobe Interactive Forms has been correctly setup, can values on an Adobe Form be updated after retrieval from the back-end database?
Updating of UI elements NOT on the Adobe Form has always worked; but, there it is unclear if the problem to update values inside the Adobe Form has been resolved.
Can anyone address this issue with a detailed explanation or example code?
Best regards,
john

Can you please, open a customer message in the BC-SRV-FP queue and please, provide your landscape component info, i.e., ECC 6.00(SPS10), AS Java SPS?. Please also, provide a WTS connection and information on how to replicate the problem. If it is possible also, upload the webdynpro project in question.
Thanks... George

Updation of Ztable clicking on submit button in adobe interactive forms

Hi all,
In my adobe interactive form i have student details and one SUBMIT BUTTON.After clicking on that button i need to update the details in my Ztable. How Can I do?Where Can I write the code?
Please reply me.
Thanks in advance.

Hi, I'm afraid I think there is no place where you can "catch" click on button in interactive form in sapgui, but you can:
use http submit button and send data to your web service, which receive dataa and update your ztable,
or you can create webdynpro, where you can catch click on submit button a in this event you can update yout ztable (my previous post).
Please remember, that you can run your webdynpro application in sapgui:
REPORT DEMO_START_WD_IN_PLACE1 MESSAGE-ID SWDP_RUNTIME.
start-of-selection.
CALL FUNCTION 'WDY_EXECUTE_IN_PLACE'
    EXPORTING
     PROTOCOL               = 'HTTP'       " HTTP | HTTPS
    INTERNALMODE           = 'X'    "SPACE - browser is started
    PARAMETERS             =
      APPLICATION            = 'your_webdynpro_application
     CONTAINER_NAME         = 'SAP Formuláře'
    EXCEPTIONS
      INVALID_APPLICATION    = 1
      BROWSER_NOT_STARTED    = 2
      OTHERS                 = 3.
IF sy-subrc EQ 1.
    MESSAGE a400.
ELSEIF sy-subrc = 2.
    MESSAGE a401.
ELSEIF sy-subrc = 3.
    MESSAGE a667.
ENDIF.

WEBDYNPRO ADOBE INTERACTIVE FORMS INTERNAL TABLE BINDING

Hello Firends,
I have created one table in the WebDynpro Program with Context NODE_RESULT having Cardinality 0...n in the View ADOBE_VIEW. In this view I have created the Interactive Form and specified the properties: data source as NODE_RESULT, Template Source as Z_XX_ADOBE_FORM.
Also I have made an supply function for the context NODE_RESULT as GET_RESULT.
In the Supply Function I have used the BAPI to fill the contents of Internal table (itab_data). And have binded the itab_data using node->bind_elements... (ALSO Tried node->bind_table...).
Also I have coded the HANDLE_IN method.
Here the point is that I can see the table in the interactive form layout and have successfuly binded all the elements and when I have tested the form, the Adobe form is showing the blank table. i.e. it is showing up only the design of table, not the internal table values what I have binded.
I have made every check like ADS is working fine as I can run the Interactive form through the ABAP program (i.e. through se38, where the form is allowing me to save the data in the PDF).
Have installed the ACF.
Also checked that the form is XML based schema and it Generated.
Here everything is fine but I am unable to bind the internal table from webdynpro to Adobe Interative form.
Friends plz help me in resolving this issue.
Thanking You
Regards
Pradeep Goli

Hi Vaibhav,
Sorry for replying late.. I have done debugging on the node and found values are being populated to the internal table which i have created, and also as you said i have dragged the node and found the table icon is appearing and in form object pallette of that table the poperty of binding is "....[*]" is also creating but the vvalues are not being reflected to the PDF output.
Also i have tried many approaches like first creating the form and then creating the webdynpro program and by linking the form to the wendunprro. But the result is same i.e. no values are being found in output.
But i have a doubt that what are the system requirements to get this binding done properly. i.e. I am using Netweaver 2004 with SPS release 7 and Adobe 8 and ACF is being installed in the system. And also I can see the values if I am using the structure but the problem is with table. And I can work with the ABAP ADOBE where if I am coding using se38 and executing the values are excellently displaying in the PDF output(Similar case with interactive forms) Also ADS is properly configured.
Is it compulsary to have SPS GREATER than 8 for NETWEAVER 2004.
Please kindly help me in this regard. Thanking you at the earliest.
Regards
Pradeep Goli

Filling dynamic drop down in adobe interactive form( webdynpro ABAP)

HI all,
Im new in Webdynpro ABAP, my requirement is to fill drop down list in adobe interactive form. i created adobe form and its working fine.
I Created context like ROOT(cardinality 1:1)->DATANODE cardinality 0:n. This context is for drop down and in wddoinit i did like this.
IN WDDOINIT ,
DATA lo_nd_root TYPE REF TO if_wd_context_node.
DATA lo_nd_datanode TYPE REF TO if_wd_context_node.
DATA lo_el_datanode TYPE REF TO if_wd_context_element.
DATA ls_datanode TYPE wd_this->elements_datanode.
navigate from <CONTEXT> to <ROOT> via lead selection
lo_nd_root = wd_context->get_child_node( name = wd_this->wdctx_root ).
navigate from <ROOT> to <DATANODE> via lead selection
lo_nd_datanode = lo_nd_root->get_child_node( name = wd_this->wdctx_datanode ).
get element via lead selection
lo_el_datanode = lo_nd_datanode->get_element( ).
ls_datanode[] = lt_dna_value[].
CALL METHOD lo_nd_datanode->bind_table
EXPORTING
    new_items            = ls_datanode
    set_initial_elements = ABAP_TRUE.
   index                =
while executing i'm getting this error ": WebDynpro Exception: ADS: com.adobe.ProcessingException: No output was generated while rendering: Stream for: PDFOut.(200,101). " . can u please tell me how to bind value for drop down.
I created sample table in same form and i binded same value to table, that time its executing fine.
can u please tell me solution for this Scenario.
Thanks
Hemachandran.
Edited by: hemachandran R on Sep 12, 2008 2:27 PM

hi,
My requirement, is to use dynamic drop down in dynamic table. I am using webdynpro abap.
i populated the value in drop down.
Its working fine but the problem is how to fill the default value in drop down. because i want to bind the default value which im getting specify value from the table.because each row
im getting different values, like first row
CAR
, that CAR want to fill as a default value in drop down and second row as
BIKE
that BIKE want to fill as default value in drop down ( example drop down contain   car , bike , cycle).
In adobe form i binded like this
$record.DATANODE.DATA[*].DNA_RATING
i dont know whether this one is correct or wrong .
im getting default value as empty.
please give me some solution how to do this.its very urgent
thanks
hemachandran.

Error while running adobe interactive form

Hi,
I made a scenario to update a z table using adobe interactive form in webdynpro.While executing I am getting the error as :
Termination type was : RABAX_STATE
Can anyone please guide me as to what can be the reason behind this error.
Thanks in advance !!

Hi
I suggest that you first review your configuration using this tutorial which short and to the point:
[ADS configuration|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f03414f8-d4ce-2a10-d4b6-ab201b329d98]
After that perform the tests that were suggested in the posts above (link to the relevant tests [ADS tests|http://help.sap.com/saphelp_nwmobile71/helpdata/en/43/f31e3082221595e10000000a1553f7/content.htm]
Regards
Adi J.

Data Passing Problem with Adobe Interactive Forms

Hello all,
I am trying to create a Guided Procedure to implement an offline Adobe Interactive form. This form is based on the standard Requisition Request form used in MSS for e-Recruiting.
I've copied the standard form and updated the layout to ZCI using the appropriate transaction (not manually). After that, I've changed the Interface and layout. But to get the Form in the portal you need to have a .xpd file. Therefore, I've tested the form in preview mode, saved a copy as a PDF file and opened this copy in the standalone Adobe Lifecycler Designer. In the standalone version you are able to save the form as a PDF (not possible using transaction SFP).
My question 1 is if this is a wrong approach and there is a better way to retrieve the xpd file.
Next to that, I wrote a RFC function to retrieve data in the backend. This function is working and now I try to pass the data to the Form in the GP (using prefilling). The data is never passed, any points that I need to check there. The data used to export is a structure that contains a number of table types, because Adobe has issues with importing tables it seems. The form is working correctly in the backend.
Points will be rewarded for helpfull awnsers!
Kind regards & thanks in advance...

Check double post

Webservice giving error "couldn't post data to " in adobe interactive form

Hi Gurus
My requirment in to place a submit button in adobe interactive form , when the user clicks on it the data in the form has to update the table. For this purpose i have configured webservice in my crm 2007 server. Now webservice is working and i m getting the response. but when i create a data connection in the adobe form and when i execute the webservice i getting " Couldn't post data to ". "
error . Plz help me out to resolve this issue
Thanks in advance
Regards
Johny

Hi Jhonny,
Make the Submit button a regular one instead of execute and place the following code in the click event(JavaScript).
var cURL = "Provide the Soap Address url which is present in WSDL";
var service = SOAP.connect(cURL);
xfa.connectionSet.DataConnection.execute(0);
Regards,
Mathan

Unable to toggle a Radiobutton in an adobe interactive form

Hello experts,
I am populating a table in adobe interactive form and table is bound the context node of Wedbynpro java. I want first column of table to be with radio button and at a time only one radio button should be active.
But problem is i can put active all the radio buttons in that column when only one should be active.
What would be an issue ?
Thanks in advance.
Swami

Hi Swami,
Unless and untill the radio buttons are in a group you can select all of them.
Since each record in the table is comnpletely independent with other you have this behaviour.
Is the requirement is something like you will have a dynamic table on the form.
user can select only one row at any instance, if so I would simply write a on click event script.
Onclick get the instance Index of that row.
loop through all the instances of the table and set the coulmn (radio button value) to null / off when the index is same as the selected index set it to on.
Hope this gives you an approach.
Cheers,
Sai

Table Row update in Adobe Interactive Form

Similar Messages

Maybe you are looking for