Tables that contains the legacy systems authorization information

Hi all,
I'm setting up legacy systems in my SAP GRC 5.3. We would like to check if the information uploaded from the extractor is correct. Does anyone know what are the GRC 5.3 tables that contains all the systems authorization from the legacy system uploaded?
Thank you in advanced.

Hi,
If I understand your question correctly, you wish to know the GRC 5.3 RAR tables that contains the authorization information and want to connect a legacy system.
If you check the /VIRSA/* tables, you can find all the GRC related tables.
However, if you are trying to perform an offline risk analysis, refer the below Article:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20a06e3f-24b6-2a10-dba0-e8174339c47c
Hope this helps!!
Regards,
Raghu

Similar Messages

  • Table that contains the change date for every cost element

    Hi everyone!
    Can anyone please help me find a table which contains the change date for every cost element?
    Thanks,Jess

    If you basically want to find out if anyone changed the cost element, you need to use transaction KA05 and enter the cost element and controlling area.
    This would actually bring you whatever field was changed and on double clicking give you the actual change and the date on which the change was made.
    Problem is this change date is actually the creation date of a change document which is in the table CDHDR.Its not like the change date is on any master tables.
    Hope this helps
    Deepa

  • What are the tables that Contains DTP Filter Entries

    Hello,
    for the filter entries on a DTP Process I found the table RSBKSELECT "Selections for DTP Request (Summary)". But that holds only value which are done generic by Formula etc. but not the information which are entered manual.
    Does anybody knows the table for the rest of entries ??
    I need this Information to Report these Filter as Selectioncriteria.
    Thank for any help
    Henning

    Hi,
    Please note that I was able to link the tables by this kind of code:
    "Get the request from the cube, to identify them.
        CALL FUNCTION 'RSSM_ICUBE_REQUESTS_GET'
          EXPORTING
            i_infocube     = LV_IC
          IMPORTING
            e_t_request    = LT_REQUEST
          EXCEPTIONS
            wrong_infocube = 1
            internal_error = 2
            others         = 3.
    "Check each request
        LOOP AT LT_REQUEST INTO LS_REQUEST.
          "Populate LV_REQUID_CHAR to be able to read the table RSBKSELECT
          "The key is : Request id, without leading 0, right justified, and shifted one time to the left.
          LV_REQUID_CHAR = LS_REQUEST-PARTNR.
          SHIFT LV_REQUID_CHAR LEFT DELETING LEADING '0'.
          SHIFT LV_REQUID_CHAR RIGHT DELETING TRAILING SPACE.
          SHIFT LV_REQUID_CHAR LEFT.
          "Get the filters
          SELECT  *
            INTO TABLE LT_RSBKSELECT
            FROM RSBKSELECT
            WHERE REQUID = LV_REQUID_CHAR.
    ENDLOOP.
    The internal table LT_RSBKSELECT will now contains all the filters used by the DTP.
    It is way better than using the field that contains the concatenation of all filters since it is limited to 255 characters.
    Hope it helps.

  • Is there a system table that stores the "create table" scripts

    Does a Oracle system table exist that contains the "create table" scripts for tables defined under a schema?
    I know I can build this with SQL by querying the user_tab_columns, but I was wondering whether the entire DML
    statement is already stored in some other system table. In the Quest Toad software you can simply go to the "Schema Brower", "Tables",
    then select the "Script" tab and it shows you the "create table" statement for the particular table that you are
    looking at. I'm wondering whether Toad behind the scenes is building this "create table" script via the user_tab_columns
    table or using another system table.
    Thank you in advance,
    Wes

    you can use the DBMS_METADATA.GET_DDL procedure to obtain the details regarding the ddl statement used to create the table.

  • BAPI or RFC that contains the user information

    Hi,
    Please let me know if there is any BAPI or RFC that contains the user information like user IDs, passwords etc. I need that to use in the XI. I am using SAP system as the target system or the source system .
    Thanks
    kanan

    Hello Kanan
    Just call function module BAPI_USER_GET_DETAIL.
    Regards
      Uwe

  • ANYBODY GIVE ME THE TABLE/TABLES THAT CONTAIN TCODE AND DEVELOPMENT CLASS

    ANYBODY GIVE ME THE TABLE/TABLES THAT CONTAIN TCODE AND DEVELOPMENT CLASS

    Hi phani,
                 The table TSTC contains the transaction codes.
    Also the below links provides a lot of info on the Standard SAP Tables.
    http://www.sapdev.co.uk/tables/tables.htm
    Pls reward if useful..
    Thanks,
    Sirisha.

  • File that contains the information for icons like Answers, logout etc

    Hi
    We have a requirement to remove the icons like Answers, logout etc on top of the OBIEE 10.3.3.0 application. It would be very helpful and greatly appreciated, if anyone could let me know the file that contains the information for these icons.
    Thanks
    Samrat

    OBIEE11g issue: hiding header banner in OBIEE 11g?
    That link talks about the 11g customization. But still the folder is "msgdb\common".
    Check whether you are able to find this file and see whether any of those tags are available.

  • Finding tables that contain a column

    Hi all,
    I am a relatively new SQL user and am trying to figure out how to find all tables that contain a particular column, eg, 'cust_id'. I have tried a bunch of different things and searched on Google but I think I don't quite have/understand the syntax I need.
    Also, how would I display a list of all the columns in all the tables?
    Thanks!

    Hi,
    apex wrote:
    Thanks for the input! I got my first question working.
    I am still trying to understand basic ideas in SQL, eg what is the all_tab_columns in Raj's link, as usually I call something from a particular table. All_tab_columns is a view in the sys schema. There are several tables and views in the sys schema whose names start with user_ or all_ (or dba_, but you may not have privileges to see those) which are collectively called the Data Dictionary . They contain information about the database itself, including the tables in the database.
    It states there that the ANALYZE command can be used to gather statistics for this view, but I have not been able to get it working.
    Eg, in Oracle SQL Developer, I type in "help <analyze>" but it doesn't tell me what the syntax of this command is, I had to use Google which gives the following
    To estimate statistics:
    ANALYZE TABLE tablename ESTIMATE STATISTICS SAMPLE 30 PERCENT;
    To compute statistics:
    ANALYZE TABLE tablename COMPUTE STATISTICS;
    But when I try the last one it just says
    table CUSTOMERS analyzed.
    but I don't see any output, and if I try to use ANALYZE all_tab_columns; it gives me an error message. When you analyze a table, a message like "table CUSTOMERS analyzed" is all you expect to see. The main purpose of anlyzing isn't to produce a report for you to read (as helpful as thant might be) but to update the data dictionary, so that Oracle knows how to do queries efficiently. For example, if you have a query like
    SELECT  *
    FROM    patients
    WHERE   birth_date  = DATE '1981-07-28'
    AND     state_abbr  = 'NY';How does the system decide whether to look for rows with the right birth_date first, or the right state? The statistics in the data dictionary might tell it that birth_date has many more ditinct values, so looking for a particular birth_date first will narrow down the search much faster than looking for a particular state.
    By the way, the ANALYZE command has been deprecated. Unless you're using a very old version of Oracle, you should be calling the dbms_stats package instead:
    http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28419/d_stats.htm#CIHBIEII
    I am using Sam's teach yourself SQL in 10 minutes which is very good at the very specific commands and functions it describes but doesn't really orient me to the language, doesn't explain how to use the help functions, or any treatment of tasks not contanied in the book. If someone can recommend another source would appreciate it. Much thanks!That's the frustrating thing about books; you can't ask them questions. (On the other hand, that's one of the nice things about this forum.)
    I can understand why the book doesn't say much about analyzing. The book is about SQL (e.g., how to create a table or write a query). Statistics are not in the scope of that book. Actually, they're not really in the scope of this forum, either. If you have questions about statistics, you're better off posting them in the "Database - General" forum:
    General Database Discussions

  • Raising an Alert ,when the Legacy system is down

    Hi,
      I want to raise an Alert or some thing when my Source Legacy system is down.
    My scenario is  File -to - IDOC .  I'm getting all the XML files from the FTP server. so, My source system is FTP srever . Due to network problem or some other problem  my FTP server is  getting down very frequently. Now i want to send this information to respected persons in a automated way.
    Is there any option that know  the Legacy server status , How can we  know that FTP server is down .
    Please suggest me some solution for this type of prblems.
    Regards
    Jain

    Hi
    You can use BPM and check whether the system is up or nt (using the Connection FM STFC_CONNECTION )
    In case of system errors and application errors you can use alerts.
    System error: Runtime errors, mapping errors , application system is down, Adapter engine is down etc....
    application error: If you are checking some validations , if they fails you can throw alerts.
    For application errors you use BPM.
    You can raise alerts if mapping, receiver determination etc.. fails in the integartion engine. You need to configure alert rules for this. You can go to RWB->Alert Configuration->Where did the error occur? choose integration engine and you can see different error categories and error codes which can be configured using alert rules. Refer this michal's weblog for configuring the same..
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    Currently alerts for Adapter framework errors are not supported.
    You can also raise an alerts from BPM for any mapping failures, send step system errors/application errors using fault messages (through exception branch).
    Refer this weblog for configuring an alert in the BPM
    /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
    hope this helps..
    Regards
    Abhishek
    Edited by: Abhishek Agrahari on Jan 30, 2009 7:54 AM

  • Table that contain epstp field

    dear all expert
    i want to create report for pr relase
    i have some problem, in item category i found epstp field, but i cannot found the table
    in eban i found pstyp, but its different with epstp
    please help me to found table that contain epstp field

    Hi,
    you can find in T163X and T163Y.
    epstp is Item category in purchasing document.
    Regrds,
    Nikhil.

  • Table that stores the business role and user id mapping

    Hi,
    i want to know the table that stores the Business role and the business role and user id mapping in CRM system.
    Thanks in Advance.
    Regards,
    Pricy

    Hi Mary,
    There is no direct table but there is a way to find it.
    HRP1263 is the table where business roles are stored when maintained at org level. These are stored against the Position.
    For getting user ID and position linkage refer table HRP1001.
    In HRP1001 table use below criteria to get the User and Position.
    OTYPE = CP
    SCLAS = US
    SOBID = User ID
    ENDDA = 31.12.9999
    Get the OBJID
    Query the HRP1001 table again with following
    OTYPE = CP
    OBJID = OBJID from above Query
    ENDDA = 31.12.9999
    SCLAS = S
    SOBID = Thats Position.
    Pass the position to HRP1263 as below.
    OTYPE = S
    OBJID = POSITION
    PROFILE - Thats business role assigned for the given position and user.
    Hope this is helpful.
    Regards,
    Naresh

  • Table that contains DTP selections

    Hi,
    Does anyone know a table in BI that contains the specific DTP selections? For infopackages, we already found RSLDPSEL.
    Thank you.

    Hi Donna,
    Check table  RSBKDATAPAKSEL.
    Or you can check table RSSELDTP, in this table all selections are stored in one field with its characteristic, separated by ;
    Regards,
    Durgesh.
    Edited by: Durgesh Gandewar on Nov 8, 2011 12:04 PM

  • What is the directory that contains the init directories ?

    What is the directory that contains the init directories (rc0.d/ to
    rc6.d/)? 
    I want to install a copy of vmware5

    I think you've missed the point. Arch uses BSD-style init - /etc/rc.d. If vmware, or any other app, has an init script, it should be installed in /etc/rc.d, and if you want the app to start/stop on system boot/halt, the daemon name should be added to rc.conf DAEMONS. Creating rcX.d directories is pointless, because the Arch init process won't do anything with them.

  • Hyperion Explorer 8.3 querying multiple tables that contain a specific item

    I have 3 annual tables that contain data for 3 different years.  Each table has a sale amount, item sold, and customer ID.  I want to pull a specific customer ID from all 3 tables at once. 
    Is there a way to achieve this?
    Thanks!
    Johnny

    Add the 3 fields from the first table, then click Query > Append Query, then add the same 3 fields in the same order from the second table, then add the same 3 fields in the same order from the third table.  This creates a UNION between the three tables; which means they need to be in the same order and have the same datatype.
    If you want to show duplicate data found in the different sources, just change the UNION operator to a UNION ALL operator, otherwise it will suppress any duplicate rows.
    To limit the data to one specific customer ID, you can set a limit on each of the UNION tabs with 'Customer ID = <selection>'.
    Good luck!
    Jarod Vierstra

  • Is there a variable that contains the current report name ?

    Hi:
    I'm trying to log certain data to an audit table when users run BI Publisher reports. I have the BI Publisher user name from xdo_user_name but I'd like to get the name of the report that user is executing as well. Is that an xdo variable or something as well?
    Thanks.

    Not really sure. But if your report uses package/procedures, you could set something up at the DB level to figure out how many times the procedure executes and have another domain table that associates the db object with the report name.
    I don't think you would need to set any parameters at the report level.
    But there is no way that I know of to capture the user information etc..
    Thanks,
    Bipuser

Maybe you are looking for