Table title text not wrapping on 2nd page after inserting variable

When I add the variable (continued) to a table title, it increased the length of the sentence on the second page. The text doesn't wrap, it just gets cut off. Any suggestions?

Unless someone else has found some magic trick... You are kind of stuck here: Either keep your table heading short enough to have room for the continuation variable, or make sure the text flows into the second line all the time.
It is apparently so that a repeated table heading has the same geometry as the original, first heading. [I don’t like it, but I kind of understand that limitation.]
- Michael

Similar Messages

Table row does not flow to next page

Hi,
I am using deep structure table in adobe form but the content is not flowing to next page.
I have wraped the table in subform, Body Page, subform and table all are flowed and allow page breaks with content is also ticked, still the table row does not flow to next page.
Regards,
Kimaya

Hi Kimaya,
Just drag the table directly on the body page and execute the form. This should take care of the properties required for data to flow on the form.
Thanks

Text not wrapping on Data Review Screen

We are having an issue with text not wrapping on a screen, this has happened on the interview screens as well as the data review. Has anyone had this problem before? And how to fix it?
Thank you,

This will be a CSS issue which can be addressed by modifying main.vm.css. I don't know much about CSS, but when I had this issue with the data review screen for a custom look and feel I was working on, I was able to resolve it by specifying a data-review-item width which was smaller than the width of my banner graphic.
In my example, my banner graphic was 960px in width, and I added "width: 820px;" for data-review-item in main.vm.css:
.data-review-item {
clear: both;
width: 820px;
}If you have a CSS person around, get them to take a look at main.vm.css and I expect they'll be able to work out the right fix for your specific situation.
Cheers,
Jasmine

Text Not Found. Message Number: ZJV 001 Variable: CPZZZZ ZZZ 3303001 Accoun

All!
We are currently posting payroll results to our accounting system and everything is working fine just untill last week.
There were a few simulations over the weekend and the following error occrued.
Text Not Found. Message Number: ZJV 001 Variable: CPZZZZ ZZZ 3303001 Account
Could some one throw some light on what exactly this error is referring to..and the content we are missing here.
Thanks & Regards,
Vikram. B

Dear Vikram,
I don't think this message is SAP standard, the number start with Z* which make me think that it is custom made.
I could not find similar message in our system.
Please check your user exit/Badi's or custom modification if any.
Best regards
Sarah

I want to create a cd on my mac that autolaunches an .html-page after inserting into a pc or a mac. Is that possible?l

I want to create a cd on my mac that autolaunches an .html-page after inserting into a pc or a mac. Is that possible?

Solving this requirement on a modern Windows system is going to be problematic too, as the autorun mechanisms are increasingly being locked down over there, if not by the end-user or the system installer, then by the usual anti-malware tools that are installed.
Given this is one of the most vulnerable populations here in terms of operational security, you'll probably want to target online distribution, or to distribute a signed application that can be installed on the target (akin to a managed system) and that then accesses your data on external storage. All that app might do is access the disk, verify that the contents of the device are trusted and valid, and launch the browser.
I'd likely target online distribution or pre-loaded distributions and iOS, as that's where all of the older folks I'm dealing with are headed, too. If not a native app, then maybe a web-app here, and download the contents into the HTML5 local storage.

How to make a text field wrap to next page

I've done my best to find the solution to my problem before coming here to post, so forgive me if I've missed a previously posted solution.
I am a .NET coder, using iText to manipulate PDF's. I need to create a template for a corporate invoice that will allow me to have header and footer content on a page, surrounding the invoice detail section and have the invoice detail wrap to the next page as necessary.
Criteria: All pages have the invoice header. All pages have the invoice footer with pagination (i.e. Page 1 of n). The number of pages is controlled by the number fo lines in the invoice detail text field.
For example, if the text field holds 30 lines and each line item takes up a single line. An invoice with 25 line items would only use one page. If the invoice has 35 line items, the content in the text area needs to flow to page 2 in the invoice detail area.
I have tried every combination I can dream up in Adobe LiveCycle Designer and I cannot get a document set up that will flow from page 1 to page 2.
For me to be able to access invoice detail field in code, it appears that it needs need to be a Text Field. I've been able to access the fields from my .NET code and fill them in without issue.
What I cannot get is a template that will allow me to put more content in the detail area than fits on page one and have it automatically create a second page and flow the content into the detail area.
Can anyone point me in the right direction, or provide a working sample PDF?
I.e.
PAGE 1:
MY COMPANY
ADDRESS
INVOICE #20
Line item #1
Lilne item #1 detail
Line item #2
Line item #2 detail <from here, detail must flow to the detail section of the next page>
Page 1 of 2
PAGE 2:
MY COMPANY
ADDRESS
INVOICE #20
Line item #3
Lilne item #3 detail
Line item #4
Line item #4 detail
Page 2 of 2

While I appreciate the direction to the samples, that is not resolving my issue. I had already seen the samples before I posted in this forum.
None of the samples have what I've requested assistance with above.
I need a static 3" header, a 5" content area and a 1" footer on every page in a document. I want to be able to put content in the content area and have it wrap to subsequent pages if the content is more than will fit in the area. Each subsequent page must also have the 3" header, 5" content area and 1" footer.
This will not be edited in Acrobat, it will be edited in .NET code without human intervention, so having click buttons to add another row to a table is not an option.
I could create the entire PDF programmatically, but I'm seeking to find if Adobe LiveCycle Designer can make the PDF form in an easy to use GUI.
If the details of my need above do not provide a clear requirement, feel free to point that out.

XML child 'Title' does not show on web page

I have imported an XML file and when I launch the page the
title does not show.
The following is on my page but does not display "
<td><?xml version="1.0" encoding="UTF-8"?>
<Title>Miss Congeniality 2: Armed and
Fabulous</Title>xx </td>
The rest of the field do display and I can not understand why
'Title' Does not display.
Thanks for any help
David Merchant
The following is the code to display the data:
<cfloop index="MyCounter" from="1" to="#Counter#">
<tr>
<td>#mydoc.Collection.DVD[MyCounter].ID#</td>
<td>#mydoc.Collection.DVD[MyCounter].UPC#</td>
<td>#mydoc.Collection.DVD[MyCounter].ProfileTimestamp#</td>
<td>#toString(mydoc.Collection.DVD[MyCounter]["Title"])#xx </td>
<td>#mydoc.Collection.DVD[MyCounter]["SortTitle"]#</td>
<td>#mydoc.Collection.DVD[MyCounter]["Rating"]#</td>
<td>#mydoc.Collection.DVD[MyCounter]["ProductionYear"]#</td>
<td>#mydoc.Collection.DVD[MyCounter]["RunningTime"]#</td>
<td>#mydoc.Collection.DVD[MyCounter]["Audio"]#</td>
</cfloop>
This is the XML file I am reading
<?xml version="1.0" encoding="us-ascii"?>


<Collection>
<DVD>
<ID>012569557123.21</ID>
<UPC>012569-557123</UPC>
<ProfileTimestamp>2004-03-17
23:58:12</ProfileTimestamp>
<Title>Doctor Zhivago</Title>
<SortTitle>Doctor Zhivago</SortTitle>
<Regions>
<Region>3</Region>
</Regions>
<Discs>
</Discs>
</DVD>
</Collection>

I believe you want to print the XML node's text to a HTML
table cell. To do so you would change:
<td>#mydoc.Collection.DVD[MyCounter].ID#</td>
to
<td>#mydoc.Collection.DVD[MyCounter].ID.XMLText#</td>
Try appending ".XMLText" to your variables.
I would also consider droping the ToString method with:
<td>#toString(mydoc.Collection.DVD[MyCounter]["Title"])#xx </td>
to
<td>#mydoc.Collection.DVD[MyCounter]["Title"].XMLText#</td>
I don't know why you are invoking the toString() function
here and not on the other nodes. It only confuses me, and likely
you when you have to return to this code later, unless you are
trying to do something special with this node, like set your HTML
<title> tag.
If you are trying to set your document's <title> tag
then it should belong between the <head> tag of your document
and not inside your table, as a matter of semantics.

How to continue notes on a 2nd page

How do I do a multi-line text field that will continue to a 2nd page ? either a predefined (blank) 2nd page or one that is created when text goes beyond the page your on ?

It's not possible to implement this feature smoothly in a PDF file.

Standard Text not starting on current page in sap script

Hi all,
       I have a sapscript which displays a dynamic table. After that table I have included the standard text.
Ideally this standard text should display immediately after the table. But this is not happening. After the table, entrire page is left blank, and standard text starts from the next page.
How can i display standard text immediately after the table.

Hi,
    Try with calling PROTECT and ENDPROTECT using function module CONTROL_FORM in driver program.
CALL FUNCTION 'CONTROL_FORM'
          EXPORTING
            command = 'PROTECT'.
        PERFORM item_dynamic_table.
        PERFORM item_standard_text.
        CALL FUNCTION 'CONTROL_FORM'
          EXPORTING
            command = 'ENDPROTECT'.
Call the TEXT elements in corresponding performs.
Regards
Bala Krishna

Titles/text not showing up online

Just created pages/album with the black background theme.
the text/titles are NOT showing online.
what gives? thanks.

Could it be that the text is black and not showing up against the background. Click and drag the cursor over the page in the browser to see if the text shows up.
In iWeb go to the Album page where the thumbnails are displayed click on one and do a Select All. Next click on the Font button at the bottom and in the Font pane click on the 3rd button from the left, the one with the green square. There you can set the color you want.
This demo page has the first picture's text set to the background color so you can see the effect of dragging the cursor over it to see the hidden text.
OT

Fillable PDF will not scroll to 2nd page

I have a 4 page fillable PDF. The 2nd two pages are exact duplicates of the 1st two pages, and not needed. When I delete the 2nd two pages, and "save as" the file, it works fine until I close the document. Once I close and re-open the document, it will not go past the third or fourth line on the 2nd page before automatically going back to the top of the form.
This is not a form I created, and the person who created it is no longer here. Could there be some type of setting that is making this happen?
I am working in Adobe Acrobat 9, if that matters.

Thank you!!! That was it! Form is working perfect now!
Thanks again!!

The table content is not printed on next page.

I made a form with a internal table which have so many rows.
The Internal table's content is printed on only one page.
Absolutely, the internal table has rows enough to be printed more than two pages.
What I have problem? I looked around SDN related document.
Some SDN peer say "How about usinge subform?".....
If the subform is way to sovle this problem, Let me know on that in detail.
Regards Etnaya

> Hi Junha,
>
> Use a 2-Level Subform hierarchy.
>
> The Top Subform (Parent) should have the following
> settings:-
>
> 1. The Type (In Palettes->Object->subform)
> should be Flow Content
> 2. The Flow Direction should be of Type
> Table.
> 3. Check the box for Allow Page breake
> within Contents
>
> The Child Subformshould have the following
> settings:-
>
> 1. The Type (In Palettes->Object->subform)
> should be Flow Content
> 2. The Flow Direction should be of Type
> Table Row.
> 3. Check the box for Allow Page breake
> within Contents.
> 4. Also Check the box in the binding
> tab for Repeat Subform for each Data Item and
> set the Minimum count to 1
I'm affraid Poojith M V is using an older version of Adobe Designer (not 7.1).
Above comments on Table design are not applicable to the Designer 7.1, where absolutely new mechanism of table design was implemented.
With latest version of Designer using 2-level Subform becomes unneede - Body page with table included directly in it should be enough.
Regards,
Petr Perstnev

Internal Table data is not overflowing into Next Page - Adobeforms

Hi,
     I have an issue if the internal table consits of more than 20 records that data is not overflowing into next page.
     Here am using Header only on first page & Table will follows...
Regards,
PraVeen..
Edited by: praveenreddys on Feb 15, 2012 10:51 PM

Hi praveenreddys ,
I had the same requirement, I did as follows:
LEFT HAND SIDE SELECT "TABLE": check below right hand side properties for this object
1. table tab: select the check box allow page breaks within content.
2. pagination tab: place: Following previous
                            after:continue filling parent
                           overflow: none.
LEFT HAND SIDE SELECT "HEADER": check below right hand side properties for this object
3. row tab: select the check box allow page breaks within content.
4. pagination tab: place: Following previous
                            after:continue filling parent
                           overflow: none.
select the check boxes: Include header row in initial page
                                        include header row in subsequent pages
Binding tab property:
5.select check box: Repeat row for each data item
LEFT HAND SIDE SELECT "ROW": check below right hand side properties for this object
6. Row tab: DON'T select the chek box allow page breaks with in content
4. pagination tab: place: Following previous
                            after:continue filling parent
                           overflow: none.
Binding tab property:
5.select check box: Repeat row for each data item
Then test..it would work for you...ALL THE BEST!!!
If this helps please reward points.
Reards,
Naresh.

Paragraph Text Not Wrapping

Hi. As ridiculous as I feel posting this because it is something so simple, I can't find the solution online, and according to the manual this functionality should be default. I created a paragraph text box, and I want the text to wrap within the box. However, the text stays on one line, and disappears after the limit of the box. Pressing enter for a new line doesn't work either (also with the point text), but I shouldn't have to do that as I am used to in older versions of Photoshop. I'm still adjusting to CS4... what am I missing!?
Thanks.

Check your leading. Set it to "Auto".
Make sure the "No Break" item is NOT checked in the Character menu flyout menu.

Text Not Wrapping Properly

On the left the text wraps correctly. I save that black
disc (with transparency). When I place it the text only
wraps around the bounding box.
http://www.pixentral.com/show.php?picture=1jQTwCvkqOPXfHoTf0UdJf7xRejEk
Suggestions welcome thanks.

You are correct in CS 3 if you export and import it as a .psd and apply the wrap it will work, If asa tiff it will wrap around the bounding Box since transparent tiffs are not supported in AI.
If you bring the art in as an ai file and you saved it with the text wrap still live than it will have a clipping and will be grouped removing the clipping and ungrouping and then applying the text wrap should do it. I do not know if this works in AI CS 2.
PNG will work but jpeg and bitmap will not.
CAD export and import work as well.

Table title text not wrapping on 2nd page after inserting variable

Similar Messages

Maybe you are looking for