Table TZC37 field STATU search help drop down is not pulling any values?

Hi,
In table TZC37 field STATU(Contract status) search help is not pulling any values( drop down list when execute the table values) .. but the table has values for this field.
And also I checked in the configuration, this field has values in the config also. But still the search drop down is not getting any values.
Can any one knows what could be the reason and how to solve this issue?
I am using this field in transaction FNVS when searching loan number based on Status field.
Thanks for your time.
Murali.

Hi Micky,
I am using this in transaction FNVS (when searching Loan number based on Status field( this is Custom Search help added this field ( VDARL- SSTATI )
Value table for this data type - STATI is TZC37.
While getting records from these tables(TZC37 or VDARL ) I am trying to use drop down values for searching data using this field SSTATI. But its not showing any drop down values. It supposed to show what ever values exists for this field right?
I checked in the cofig of this table and values exists for this field.
Any help appreciated.
Thanks.

Similar Messages

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

Add search help/drop down list to a standard field in MIR7

Hi All,
I have a requirement to add a search help on one of the strandard field in MIR7. This field has no search help in dictionary (SE11). Do you have any idea on how to do this? Is there any exit that i can use to?
Please help!
Thanks in advance.

Hi Akira,
Please check the below threads.
[how to create F4 for the standard transaction]
[F4 HELP for standard field..;
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/daeda0d7-0701-0010-8caa-edc983384237]
[Re: Adding a field in standard search help;
Edited by: Prasath Arivazhagan on Apr 13, 2010 5:38 AM

Drop-Down menu not retaining selected value

I'm using LiveCycle Designer ES 8.1.1 with LiveCycle Forms and I render my forms in HTML. When Google Chrome or Safari are the user's browser the drop-down menus do not retain their selected value when going from page to page. For example I have a state drop-down on page 1. The user selects Ohio and then continues on to page 2. Then the user goes back to page 1 and the state drop-down now has Alabama selected. If the user is on IE there is no problem.
Any help would be much appreciated.
Thank you
Dennis

hi...i would like to thank u for the help...the problem has already been resolved though..
thanks,
vitish

OWHS table not getting any value in PLD

I am trying to make a pld in which i want to pull the database table owhs and place the warehouse address i am not getting any value in the PLD however there is adress in the ware house field still its not getting me any result
Please help
Regards,
manish

Hi Manish....
Even if you get the OWHS table you wont get the address format as you desire. That is complete concatenated address. It will be like city, street, country like that.....
Regards,
Rahul

F4-Help (drop down) in customer search via Tel. No.

HI,
F4-Help (drop down) in customer search used to have a search functionality which allowed 'Customer' search via 'Telephone Number'. For example, in tcodes: xd03, vd03 or where ever there is a customer input field is.
Now in 4.7 this does not exists. Does anyone knows how to restore it?
Thanks

Hi Nablan,
I found a note 195508 which states that modify two views in SE11 (V_CONTACT and VKNK_CONTACT). The second one does not exists in 4.7. The instructions for first one is incomplete.
I am still searching for answers.
Thanks for your suggestions to look at DEBI. I am curious as how you found DEBI as the relevent 'search help'.
Thanks
Nave

How to set a default value in a Value Help Drop Down List

Hi,
I used an age Range field in my adobe form, the control is a Value Help Drop Down List. i am populating the drop down using following code.
IWDAttributeInfo ageInfo = wdContext.nodePersonalData().getNodeInfo().getAttribute("CTAgeRange");
     ISimpleTypeModifiable ageType = ageInfo.getModifiableSimpleType();
     IModifiableSimpleValueSet ageValueSet = ageType.getSVServices().getModifiableSimpleValueSet();
     ageValueSet.put("1","21-29");
     ageValueSet.put("2","30-34");
     ageValueSet.put("3","35 or Above");
My requirement is to set a default value e.g. 30-34 in the age range field.
I want to give input to iform from my Implementation code only.
Please help.
Thanks in advance

hi Ranjan,
that means you have to set at design time,
to set default drop down value you will have to set the value for particular attribute (which is linked to the dropdown element) in the context
like
wdContext.currentContext<nodeName>Element.set<FieldName>(<default value>)
This generally done in Initialization method of the controller.

How to replace a field's search help of DDIC in FPM feeder class?

Hi All,
I want to replace a field's search help in DDIC structure, for an example, in structure HCMT_BSP_PA_XX_R0009, the field BANKL(Bank Keys) has a search help named 'H_BANKL', I want to replace this search help with other one such as 'H_BANKEY' in the FPM feeder class CL_HRESS_PER_DETAIL, I redefined such method:
method if_fpm_guibb_form~get_definition.
field-symbols: <fs_field_description> like line of et_field_description.
call method super->if_fpm_guibb_form~get_definition
importing
es_message = es_message
eo_field_catalog = eo_field_catalog
et_field_description = et_field_description
et_action_definition = et_action_definition
et_special_groups = et_special_groups
ev_additional_error_info = ev_additional_error_info.
read table et_field_description assigning <fs_field_description> with key name = 'BANKL'.
set search help name of field 'bank key'
if <fs_field_description> is assigned.
<fs_field_description>-ddic_shlp_name = 'H_BANKEY'
endif.
endmethod.
I test it and found the search help window was replaced indeed, but all the value of import/export parameters in the new search help was lost, it means, the value of import paramer BANKS(Bank country) and the export parameter BANKA(bank name) were lost. Only the value of BANKL itself can be returned by the new search help window. Can you give me some suggestions about how to maintain the link( value exchange) between structure HCMT_BSP_PA_XX_R0009 and dynamically defined search help 'H_BANKEY' in FPM feeder class?
I tried to use sap memory ID but it doesn't works well.

This question was answered at [Webdynpro Forum|how to replace a field's search help of DDIC in FPM feeder class?;:
That is because for the import and export of DDIC Search help values to work in WDA, not in FPM layer.Feeder Class can do nothing about it.

Adding new field in search help result view

Dear Experts,
I want to include one more field in search help result. The field shoud give description.
How can i do this in UI result view?
If I try to add attribute in result view, the result view is of type table, and it does not allow us to add value node. It will allow us to add model attribute. If I add attribute in search help resut table view then will i be able to see it in table form.
Thanks and regards
Pankaj Kumar

Hi Pankaj,
Its not that difficult.
There are two ways
1. You can enhance your Result BOL object through EEWB and append your z-field to std. BOL result object. This then appears automatically for your result context node and then you can pull it to the view in config tool.
2. Directly go to your context node class (CN00 , CN01 etc ) , now copy method GET_S_XYZ , paste it and rename as GET_yourfieldname. Similarly copy SET_S_XYZ, GET_M_XYZ and GET_I_XYZ and paste and rename. Once activated. Quit the component browser completely. Open again using bsp_wd_cmpwb. open you view and then your node. You can find you new attribut present as struct.YourField.
You can then copy code from available setter-getter methods for this attribute. You must handle setter getter by urself in this case. In may std. nodes, this is done for description field. I have personally done this for product descripton field.
if you dont want the field to be part of structure ( i.e. as struct.Yourfield ) then you can also copy paste GET_XYZ, SET_XYZ methods. your filed then do not appear as Struct.YourField but it just appears as YourField name under context node.
Hope this helps you.
Thanks & Regards.
You can check PRODUCTDESCRIPTION attribute of BTAdminI node of BT115QIT_SLSQ/Items view of BT115QIT_SLSQ component. They have added it the same way as i described above. You see the GET_ method to see how they are retrieving product description. In my object, i wrote direct query to Comm_prshtext table to retriev short_text by passing product guid and then assigen it to value variable of Get method.
Edited by: suchita P on Sep 20, 2008 2:22 AM

Extra fields in search help window in Record working time EHP5

Hi Experts,
Can you please let me know how to add additional fields/select options in search help window for Record Working Time ?
My system is EHP5 NW 7.02
I have added the custom search help for the respective filed in table " TCATS_SHLP_ITS".
I can see this table is having entry for only 4 selection options and 6 value fields for search help display.
But in my custom search help programme is having 8 select options(for advance search) and 10 display fields on the search window. It's working from CAT2 transaction but when I am running through webdynpro timesheet, I can only get 4 select options and 6 value fields.
Please let me know how to make the other fields available.
Thanks in advance.
Sonia

Hi Siddharth,
Thanks for your response. In that modify possible entries screen (Details view) I can see the search help is only having 4 select options and 6 display fields.
So as per my understanding max 6 display fields/4 select options can only be displayed on search window.
My requirement is to display more fields on search help OVS window.
Can you please suggest.
Thanks ,
Sonia

How do i populate one field based upon a drop down select from another field?

Here is what I am trying to do:
Field 1 is a drop down selection list that requires a user to make a mandatory selection which in this case is a list of apartment complexes. What I am trying to accomplish is once that user makes a selection from the drop down list (Field1) that it will populate Field 2 (standard txt) with the corresponding apartment complexes address.
So I pick Talan Apartments from field 1, it would populate field 2 with Talan Apartments address. I tried messing around with calculation scripts but I'm fighting a loosing battle here. Some help would be greatly appreciated!

Hi,
Here is a sample: https://acrobat.com/#d=Hi0ZwVgVB1PWbxc6OJ0z4A where the script in the exit event of the dropdown sets the value of the address object.
Good luck,
Niall

Inactive field "Project Versions' - from drop down

Hi Friends
I have created two versions of project through Tcode CN41. When I am looking for comparision, the field Project Versions from drop down is Inactive ie Edit >Comparisations > Project Versions. I am sure that I am missing somethig but unable to detect the same to activate Project Versions.
Would appreciate any one can help me to find out how to get activation of Project Version from drop down.Reward points can be awarded for suitable solution.
Thanks in advance.
Regards
Sudhakar

Hi Sudhakar,
I guess you are referring to project versions, not CO versions...
In this case, please make sure you select at least one version and the current data in the selection screen or more than one versions in the selection screen.
You need to select the versions in the selection screen in order to compare them.
If you cannot find the relevant fields to enter the selected version in the selection
screen, please call the database profile and tick the flag on "version data".
Hope this helps!!!
Rgds
Martina

Value is not populating in field through search help f4

Hello Expert,
I have made one field as a search help but data is not populating from popup.
Data is coming from BP_search_help. Here i did not create any search help in se11. not required here.
i used Code in get_p method.
Method GET_P_BP_NUMBER.
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      IF iv_display_mode EQ abap_true.
        rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
      ELSE.
        rv_value = cl_bsp_dlc_view_descriptor=>field_type_input.
      ENDIF.
    WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
      rv_value = ' '. "EC NOTEXT
ENDCASE.
ENDMETHOD.
GET_V Method.
DATA: ls_map TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
        lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
        lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
ls_map-context_attr = 'STRUCT.BP_NUMBER'.
ls_map-f4_attr = 'PARTNER'.
APPEND ls_map TO: lt_inmap,lt_outmap.
CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
        EXPORTING
          iv_help_id        = 'BP_HEAD_SEARCH'                            "#EC NOTEXT
          iv_help_id_kind = if_bsp_wd_valuehelp_f4descr=>help_id_kind_dtel
          iv_trigger_submit = 'X'
          iv_input_mapping = lt_inmap
          iv_output_mapping = lt_outmap
endmethod.
But when i activate get_v method .i am getting 1 error.
Error is
Please help me how to rectify this error and any other way to populate data in field through f4 help.
If u want more detail. Please follow attachment.

Hi Madhuri,
You can refer the below code for search help for partner. The code has to be written on GET_V_XXX method.
DATA: ls_map TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
         lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
   ls_map-context_attr = 'STRUCT.BP_NUMBER'.
   ls_map-f4_attr = 'PARTNER'.
   APPEND ls_map TO lt_outmap.
   CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
     EXPORTING
       iv_help_id        = 'UIF_BUPAP_WIDE_COL'    ""Search help name
       iv_help_id_kind   = if_bsp_wd_valuehelp_f4descr=>help_id_kind_comp
       iv_trigger_submit = abap_true
       iv_input_mapping = lt_inmap
       iv_output_mapping = lt_outmap.
Thanks,
Ritu

How to delete a field from search help which is delivered

hi
I got a requirement to delete a field from search help which is delivered long back
Regards
krishna

Hi
Whether it exists in DEV system or not?
Take the name of that Search Help from PRD/Quality(if it is not there in DEV system) and modify/change it by removing that field from the search help in DEV system and create a Transport request and transport the same request to Quality/PRD systems
Now the New changes (in which the field was removed) will be over written on the old search help in the PRD system, since it is the same Name (search help)
Regards
Anji

FileChooser - "switch off" file name field and file type drop down choice..

Hi there,
I'm wondering, is there a simple way of not displaying the file name field and file type drop down choice that anyone knows of?
Reason being; my FileChooser is embedded in an application window and does not pop up as a dialog - the users are only acessing one file type, but it could be in any folder on their machine.
many thanks,
Fergus.

Moved to legacy SDK forum

Table TZC37 field STATU search help drop down is not pulling any values?

Similar Messages

Maybe you are looking for