Table Values in Preview Mode are Different Than in Development Mode

Any idea why the values in a table row would be different in Preview mode than in development mode? They are only different in 1 row. The values in this row refer to values in another part of the spreadsheet that are generated by formulas. They apprear fine in Xcelsius but change in the SWF.

Hi Tony,
Thank you for sending the files to me. Our QA testers noted that one problem with the spreadsheets is that the Chart is linked to cells in your spreadsheet that are protected. This will prohibit the Chart from accessing the data in those cells. Can you send me the files again, but with all cells unprotected?

Similar Messages

Security questions are different than questions I originally answered can't access iTunes for new ipad

Need to answer security questions to access new iPad, security questions are different than what I originally answered.

Doubtful.

I will travel to France and let me know if I should buy any adapter to charge my iphone?, because the plugs are different than here in chile

I will travel to France and let me know if I should buy any adapter to charge my iphone?, because the plugs are different than here in chile

Hi Shawn,
It sounds like the person who installed the hardware didn't install the software properly for you. You should reinstall this to get full functionality and control yourself.
The process is easy:
) With the computer on, close all programs that are running and put the Creative CD-ROM into your computer's CD or DVD dri've. There are probably several disks; the one that you want should say 'Intallation and Applications CD' on the label.
2) The Setup program should start automatically in a few moments, but if nothing happens, click your Start menu and choose Run..., then click the Browse button. From the 'Look In' drop-down menu, choose your CD/DVD dri've. In the list of files that appears, choose the one called Setup or Setup.exe.
3) The Setup program will let you choose what to install. Choose to install everything. There might be two separate Setup processes that start after this: one for the soundcard's drivers, and one for the Creative MediaSource software. Within each process, when you are given the choice of Full, Custom, or Basic, select Full in each case. Follow the instructions in the programs and they will guide you through the setup process.
IMPORTANT: you will likely be given the option to use digital output only to your speakers. Only select this if you have digital speakers, attached to the sondcard through only one digital cable. If your speakers are attached using several cables, you should use analog output.
4) Once all of the Setup programs are completed, they will probably have you restart your computer.
All of the above should have been done when the card was first installed, but it seems that whoever you paid to do the installation didn't bother with the software install.
After this is all done, you should be able to use all of your speakers. If you are still having trouble, you will be able to follow the instructions that you were given before on how to enable CMSS.
Good luck!
Neeraj Mathur

Explain plan results are different in SQL Developer than SQL Plus

My Environment:
SQL Developer 1.0.0.15.27
Platform where SQL Developer is running: Windows XP 2002 SP2
Oracle Database and Client 9.2.0.7
Optimizer_mode: FIRST_ROWS
I have the following SQL statement:
SELECT a1.comp_id
FROM temp_au_company a0, au_company a1
WHERE :b2 = a0.temp_emp_code
AND a0.comp_id = a1.comp_id
AND a0.sls_terr_code != a1.sls_terr_code
AND a1.last_mdfy_date > :b1
When I run an Explain in SQL Developer I get the following access path (which is the one I really want):
SELECT STATEMENT TABLE ACCESS(BY INDEX ROWID) FEDLINK.AU_COMPANY NESTED LOOPS INDEX(RANGE SCAN)
FEDLINK.UX2_TEMP_AU_COMPANY
INDEX(RANGE SCAN) FEDLINK.PX1_COMPANY
However, when I execute the statement with sql_trace turned on and use tkprof to generate the actual access path, the statement executes as follows (which is WAY more expensive):
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 3.58 6.68 28136 29232 0 0
total 3 3.58 6.69 28136 29232 0 0
Misses in library cache during parse: 1
Optimizer goal: FIRST_ROWS
Parsing user id: 979 (FEDLINK) (recursive depth: 1)
Rows Row Source Operation
0 NESTED LOOPS
0 TABLE ACCESS FULL AU_COMPANY
0 INDEX RANGE SCAN UX2_TEMP_AU_COMPANY (object id 49783)
Notice the FULL access of au_company.
I understand that SQL Developer has nothing to do with why the statement executed the way it did, but why is the Explain in SQL Developer different than the actual execution plan?
Added note....when I run the explain in SQL Plus it is the same as the actual execution. Here is the explain from SQL Plus:
explain plan for SELECT a1.comp_id
FROM temp_au_company a0, au_company a1
WHERE '1' = a0.temp_emp_code
AND a0.comp_id = a1.comp_id
AND a0.sls_terr_code != a1.sls_terr_code
AND a1.last_mdfy_date > '01-MAY-2006';
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 2 | 76 | 2597 |
| 1 | NESTED LOOPS | | 2 | 76 | 2597 |
| 2 | TABLE ACCESS FULL | AU_COMPANY | 2 | 42 | 2595 |
| 3 | INDEX RANGE SCAN | UX2_TEMP_AU_COMPANY | 1 | 17 | 2
Thanks,
Brenda

The explain is different (full scan of au_company in SQL Plus / index access in SQL Developer) even when I use variables in SQL Plus. Here is the output for SQL Plus using variables instead of literals:
SQL> variable b1 varchar2
SQL> variable b2 char
SQL> explain plan for SELECT a1.comp_id
2 FROM temp_au_company a0, au_company a1
3 WHERE :b2 = a0.temp_emp_code
4 AND a0.comp_id = a1.comp_id
5 AND a0.sls_terr_code != a1.sls_terr_code
6 AND a1.last_mdfy_date > :b1
7 /
Explained.
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 3184 | 118K| 2995 |
| 1 | HASH JOIN | | 3184 | 118K| 2995 |
| 2 | INDEX RANGE SCAN | UX2_TEMP_AU_COMPANY | 3187 | 54179 | 3 |
| 3 | TABLE ACCESS FULL | AU_COMPANY | 24009 | 492K| 2983 |
Any other ideas? They should be the same.
Brenda

Text in layout and preview screens are different and CSS changes are not registering

I am new to designing web sites and I am using GoLive CS. Things have been going pretty smoothly, but now I have noticed a problem. When laying out my site pages, I am having problems with the text. I have inserted a layout text box and created a general CSS for my main content.
I have selected 11 px for my font size and 14 px for my line height. But when I make any changes to these values, the chages appear in my layout view, but when I preview the spacing is off (the line height is extremely tight). Why is this and how can I fix it? Also no matter what text I type, the layout view and the preview view are always off, is there any way to fix this?

Hi Kim - layout view is there just to give you an approximation of where things are in your layout, not a reliable representation of how it will be rendered in the browser. Actually, same goes for Preview. In your layout/design, you have to allow for some variance in font size and presentation since the site will be viewed on multiple platforms, browsers, environments, etc. You can get close by specifying font and line height in pixels, as you have, but it's still just "close".
If your layout relies heavily on absolutely positioned elements (Layers, Grids, etc.) then this can become a problem... one of the big reasons to avoid both.

Why would the browser preview display look different than what I am seeing in the design view? Pls help!

When working with accordion panels, when I first insert the widget it looks fine, then I begin customizing the content and then the Preview display does not look the same as the Design display. For instance, in the design display the panel aligns with the adjacent image, but in Preview, it appears offset by one or two pixels.

Hi,
Please take a look at this post with similar discussion : Re: What I see in Design mode is not the same in Preview mode. ?
Regards,
Aish

FCP7 HELP - Exported quicktime mov plays differently than what I edited on the timeline. The playback shows the clips with ins and outs that are different than what I set in the clips when I edited - some are too early and the clips don't playback

Please help ASAP.
Specs: IOS 10.6.8
Processor 2.4GHz Intel Core i5
Memory 4GB 1333 MHz DDR3 -- Everything is edited, sourced, and stored on an 2TB external hard drive to make things go faster.
Editing with FCP 7
When I export the sequence I edited with quicktime, the playback video is very different from what I edited on the timeline. The playback has the clips with ins and outs that are way off than what I cut, and some of the clips don't show at all or have changed transitions. However when I play in the timeline in FCP, the sequence is fine, just the way I cut it.
The source of the clips was one long .mov that I cut into clips for the timeline. Everything has gone smoothly but the exported .mov is just so different.
How can I get the time codes of the clips to be the same in the exported .movs? I just want the quicktime .mov to represent my edit exactly.
This video is due tomorrow - if the solution is too time consuming, can I play within the FCP player window and Log and Capture?
Thanks,
MV

What is your source material? Is it H.264? FCP does not work correctly with that material.
Click on a source clip in the FCP Browser, and once selected, type Command + 9 to see the item properties for the clip. Either report those properties, or take a screen shot of the item properties, and post that here.
Next, click anywhere in your timeline, and then type Command + 0 {zero} to see your Sequence Settings. Either report those Sequence Settings, or take a screen shot of the Sequence Settings and post that here.
MtD

Histogram mean and median in Photoshop are different than in MATLAB

Hi guys. I'm currently using Photoshop CS3 on my PC and I've been tasked to do some image analysis research. I used Photoshop to analyze a pool of 100 files to find the mean and median of their (intensity/gray) histograms. (Using the im2gray function in MATLAB)
The problem is, though, that when I analyze these same files in MATLAB with the mean (mean2), median (median(I(:)) I am coming up with different numbers. Some of the means/medians in MATLAB are as high as 15 (scale: uint8 (1-256)) away from the results in Photoshop.
I am trying to find the source of this problem, but I cannot put my finger on it. I'm thinking photoshop and MATLAB just process images differently or something but I would like to know the root cause of the problem.
If anyone can help here I'd appreciate it much!

I don't use Mathlab so this is just a shot in the dark but you might want to try going to the Edit menu and choosing Assign Profile. In the dialog choose 'Don't Color Manage This Document'.
I would think that would sent out values to Mathlab not adjusted to any profile. If that doesn't work you might try the sGray profile or one of the Gamma.
As I understand it Dot Gain is how the ink spreads on paper when screened and printed. It has to do with how much ink is layed down by the press and the paper stock.

Table control layout column positions are different with dislay positions

Hello All,
I added one column to standard table control at the 13th position,but at the display of that table control its showing at
96th position.please suggest me how to set that to 13th position at dislay.
Thanks in advance

Hi,
You can do this using a single table control.
There is a option in the screen parameters to hide the column of the table control.
So based on the list value, you loop at screen containing the table control, and set the option to make the column invisible.. Try this.
Hope it helps..
Regards,
Sekar

Backing up iphoto dates are different than original photos

I called apple about this but I find his answer hard to believe. I've exported some photos onto a folder on my desktop so I can burn a DVD to be used in a windows machine. I have young children so the date the photo was taken is extremely important to me. When clicking on a photo that I've exported and "getting info" on it, it shows the date created is about 4 days later than the date the photo is actually taken. iphoto displays the correct date, why should it change on an export? I tried exporting using filename, then tried using "title" etc and it didn't change. The answer I got from apple is that I would have to individually rename all 4000 photos with the date in the file name in order to maintain the correct dates.

The date doesn‘t change on export, the application reading the date does.
iPhoto (and any serious photo app) gets its date info from the EXIF data that your camera writes to the shot. This is the photographic metadata.
The Finder isn’t a photo app, it’s a file organiser. It doesn’t read the Exif, it reads the file data, which is not the same thing.
There are apps that will rename the files fro you, based on the Exif. Here’s one:
http://www.macupdate.com/info.php/id/25698/shootshifter
Regards
TD

Design view and browser view in DW are different than when I view from local folder

I'm brand new to Dreamweaver CS5.5 and here is my problem:
I've made an html page in dreamweaver with a banner, with an additional graphic and some text on top of the banner. It displays just fine in every browser when I view from the local folder, but when I open DW and view, it displays incorrectly in all three design, live and browser views within DW. If I make changes to the css file until it views correctly in design view, it no longer displays correctly from the local folder and it still doesn't view correctly in live or browser view within DW. If what I'm doing isnt going to display accurately in any of the views provided by Dreamweaver as compared to the live server, whats the point in having this software? I could just keep building webpages in notepad and uploading with CoreFTP.
Any suggestions? Is it some setting that I dont know about that I need to change within DW? Please help.

align="center" is deprecated (obsolete) code in XHTML & HTML5 doc types. Instead of styling markup with HTML, you should be using CSS.
CSS
.center {text-align:center}
HTML
<p class="center">some centered text here</p>
With respect to break tags, in XHTML doc types the correct syntax is <br /> not <br>. However your usage of line breaks is inconsistent with good symantic markup. Use headings <h1> <h2> <h3> <h4> for important keywords. Use <p> for descriptive paragraphs. Use <ul> <li> or <ol> <li> for lists. Line breaks should be used minimally if ever.
XHTML doc types require all tags to be lowercase. Uppercase tags will throw errors.
Your design is too rigid. When text size is increased in browsers, your content is unreadable. See screenshot.
SOLUTIONS:
1) DO NOT USE POSITION ABSOLUTE. You don't need it. Absolute positioning removes content from the normal document flow resulting in a jumbled mess. Use default CSS positioning (none) with margins, padding & floats to align elements.
2) Remove HEIGHT values from all CSS containers. Height limits a container's capacity to hold more content when needed. Container height should always be determined by the amount of content it holds; not explicit values. If required to reveal a background image, for example, use CSS min-height instead of height.
CSS Box Model
http://www.w3schools.com/css/css_boxmodel.asp
CSS Floats
http://www.w3schools.com/cssref/pr_class_float.asp
CSS min-height
http://www.w3schools.com/cssref/pr_dim_min-height.asp
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/

Colors in PDF are different than in the ID file

I can't figure out why this is happening but when I export a PDF from InDesign (CS5) things are changing slightly from what I was seeing in InDesign. Mainly the colors seem to be a bit greyer and the font weight has increased a little (See picture for comparison). Is there a setting in the PDF creation that adjusts this, I'm using the 'High Quality Print' setting when I go to export. Thanks.

Check your color settings in InDesign. They should match the PDF Export settings. It looks like the trim marks in your PDF do not allow for Bleed. You should take a closer look at your PDF setup in InDesign. Try selecting "Leave Color Unchanged" in the PDF settings. At a minimum, the settings should match in both InDesign and the PDF settings.

IPhoto MobileMe 'item counts' are different than My Gallery on the Web

I have several albums I'm published from iPhoto to MobileMe.
In the past, if I added a picture or movie to a MobileMe album using
iPhoto, the 'item count' would increase by the appropriate amount.
Now, when I add one movie, for instance, the item count displays
'1', but it appears My Gallery on the Web still has all the movies.
Conversely, when I add photos, which is in another Album, the item
count increases accordingly.
Thanks,
Paul

The date doesn‘t change on export, the application reading the date does.
iPhoto (and any serious photo app) gets its date info from the EXIF data that your camera writes to the shot. This is the photographic metadata.
The Finder isn’t a photo app, it’s a file organiser. It doesn’t read the Exif, it reads the file data, which is not the same thing.
There are apps that will rename the files fro you, based on the Exif. Here’s one:
http://www.macupdate.com/info.php/id/25698/shootshifter
Regards
TD

Time stamps in reports are different than what is on the record

We have some users in the UK who have their time setting set to GMT. On our SR form, we have a few date/time fields. The data on the form is correct.. When they run a report with these fields, the time is adjusted by 8 hours, or PST, which is the time zone in our company profile.
How can we make sure the reports show the correct time based on the users time zone?

Did you get an answer re this David? Currently a client is having the same issue, trying to run an end of month report with some records entered on the last day of the month not being captured due to this time difference.

HT5312 my security questions are different than the ones I picked

help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 on the page that you posted from should let you reset them : go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account, then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use

Table Values in Preview Mode are Different Than in Development Mode

Similar Messages

Maybe you are looking for