Tables for Transaction

Dear All,
Is there a table which provides the details of the SAP tables associated to a particular transaction.
For e.g. LT03 is used to "Create Transfer Order". I would like to know the tables which get upated using this T-Code.
Regards,
Nitin Suvarna

Hi,
There is no table that gives that information.
But you get get the required information by doing a Performance Trace - System>>Utilities>> Performance Trace.
1. Activate Trace in one session
2. Perform the transaction in another session.
3. Deactivate trace in the first session.
4. Display trace from the same session
Mathew.

Similar Messages

Table for transaction code for creation of process order

Hi Gurus,
Please tell me, in which table i can see the transaction code used to create process order.
regards
Kaisar

Hi,
Table for transactions is TSTC.
If your looking for t-code for process order - COR1.
Regards,
Vivek

Tables for transaction CJ30

Hi all, I need to know about tables for transaction CJ30.(Project System). I need to create a report. This report must include original budget, distributable, assigned, cumulative. I need to know too, the way how these tables are associeted with tables PROJ and PRPS.
Thanks for your collaboration
Best regards
gdmj

First, you have to get all the objects of the perticular project
you can achieve this by using this function module 'GET_PS_OBJECTNUMBER'
You can use RPSCO tabe only and filter all object number which you have got from above function module,
To get all the project value.
you have to set WRTTP field according to requirement.
here is screen preview for the same.
-Avirat

Table for Transaction code and Table associated

Hello Experts,
Please let me know if we have some table where it stores the information of Table Assoicated to a transaction .
( In detail : That is we give a table name in the View when we create a transaction for SM30)
Regards,
Ratna

Hello,
You have to go the table TSTCP (table for parameter transaction).
In the field PARAM, pass
*Z_TABLE*.
BR,
Suhas
Edited by: Suhas Saha on Jan 22, 2010 11:22 AM

CRM Table for Transactional data

Hi experts,
I m looking for a Table in CRM where i'll get all the transaction related data(i.e.All partners, products, status, process types etc) like we have FM CRM_ORDER_READ from this we can get all the tranaction related data.
Thanks to you !!!!
Vivian

Vivan,
The answers above are correct, CRM does not store all the data in one table like ERP. As far as the factsheet the data is stored across several different areas. So you need to tell us what part of the factsheet data you are looking for and you might get an answer.
In the future please do a search before asking, or make sure your question is more detailed as your original question was too broad for anyone to provide a reasonable answer.
Thank you,
Stephen

Tables for transaction MB54

Dear Experts;
Does anyone know where the Consignment price (KONPR), the Price unit for consignment price (KOPEI) and the Value of transaction MB54.
I'd check table MKOP but there aren't any entries on this table.
Can anyone help me?
Thanks in advance;
Ricardo

Hello;
The table MKOL doesn't have any entries.
Also, in MKOP there are the KF for quantities... not the prices/values.
Any other tips?
Thanks & Regards;
Ricardo

How to add column in table control for transaction APPCREATE

Hi All,
How can i add the additional column in table control for transaction APPCREATE.
There is structure PT1045_EXT present behind table control. But not found any customer exit or badi to display on screen.
Please help...

You can add new columns
If you add new columns in tr. PHAP_CATALOG

Entries in table CDHDR for transaction MM02 missing after upgrade to ECC6.0

Hi,
I am supporting a client who has just performed an upgrade from 4.7 to ECC6.0 on their test system. We try and use transaction MM04 (display material master changes) or MM02 and view changes to the material master but there are no entries.
During the upgrade, the entries for transaction code MM02 in table CDHDR have been lost. Can anybody give me assistance on how to avoid this when performing the production upgrade, or even better, is there any way to get these entries back?
Thank you.
Sharon.

That shouldn't happen - entries shouldn't get lost.
Is there anything in the CDHDR table (by browsing it with SE16)? If not, then something went wrong during the upgrade....
Have there been modifications to the table? Is the the table active in SE11?
Markus

TABLES FOR MASTER & TRANSACTIONAL DATA

Hi all ,
can some body help me with TABLES FOR MASTER & TRANSACTIONAL DATA
DP,SNP,PP/DP.
Thanks

Hi,
You can find out it as per your requirement.
Use transaction SE80 - ABAP workbench -->
select Repository Information system -->
Select ABAP Dictionary --> Data base table -->
In the right hand side window you will get screen in that give details as below
Standard selection screen
Table name : enter *
In the Application Component:
You will get Tree structure to Select Application Componenet
in that expand the node of SCM --> SCM APO --> SCM-APO-MD for Master Data
Here you will get application -- Double click on the required Application
e.g. Duble Click on SCM-APO-MD-PR for Product
Here you will get list of table related to application componenet Product
/SAPAPO/MATKEY Product
Some of the Master Data Tables:
/SAPAPO/APNTYPE APN Type
/SAPAPO/APNTYPET Alternative Product Number Type
/SAPAPO/APO01 APO Planning Version
/SAPAPO/APO01DEL Deletion Log File Versions
/SAPAPO/APPLOCS Location Master: Relevant Location Types for Application
/SAPAPO/APPLS Application Types : SAP Application Types
/SAPAPO/CD_LOC Customizing Change Documents Location
/SAPAPO/CD_PPRFL Customizing: Change Documents: Product Profiles
/SAPAPO/CD_PRDHD Customizing: Change Documents: Product
/SAPAPO/CD_PRDLC Customizing: Change Documents: Location Product
/SAPAPO/CD_PRDLW Customizing: Change Documents: Storage Type Product
/SAPAPO/CD_PRDWH Customizing: Change Documents: Storage Type Product
/SAPAPO/CONSPROF Model Consistency Check: Check Profile
/SAPAPO/CONSPROT Model Consistency Check: Check Profile Descriptions
/SAPAPO/CUSTCHK Model Consistency Check: User-Specific Checks
/SAPAPO/CUSTCHKT Model Consistency Check: Descriptions of User-Spec. Checks
/SAPAPO/GRPTYPE Product Group Types
/SAPAPO/GRPTYPET Description of Product Grouping
/SAPAPO/LOC Locations
/SAPAPO/LOC_SUB Mapping Table for Sublocations
/SAPAPO/LOCCOMP Table Obsolete Since SCM Release 4.1
/SAPAPO/LOCMAP Mapping Table for Locations
/SAPAPO/LOCMOT Location: Means-of-Transport-Dependent Attributes
/SAPAPO/LOCPROF Version-Dependent Location Profile for Penalty Determinati
/SAPAPO/LOCT Locations Short Text
/SAPAPO/LOCVER Location: Version-Dependent Fields
/SAPAPO/LTTYPE Location Resources
/SAPAPO/LTVER Location Resources: Version-Dependent Fields
/SAPAPO/MARM Units of Measure
/SAPAPO/MATAPN Alternative Product Number
/SAPAPO/MATBOD Product BOD Assignment
Hope this information will be helpful for you work on and find out Important tables for your own BP

Hyperlink table for IO class Issue - DMWB transaction

Hi,
We have problems when we want to activate some objects, specifically "ZRM_DOCXX". When we try to activate this object, an popup appears with the next error:
"There is no active "hyperlink" table for IO class 'ZRM_DOCP05' in 'ZRM_DOC05'
Message no. MODEL058
Procedure
Check the tabulation for the IO class &V2& and correct it if necessary."
Anyone knows where can we can customize this "hyperlink" table?
Thanks in advance and regards,
Sidney

Hi Raja,
Thanks for your reply.
When i entered the code you sent me, i get a hyperling with "Test Link". I am already haveing a link for the production order.
When i click on the "Test Link", it stays in the same page.
I sent the code in the forum.
Is there anything that you can help me?
I have created a transation ZCUS3 in SAP. The original Transaction code is ZCUS
In "Services" file,i have :
ZCUS1.srvc --> ~transaction    ZCUS
ZCUS3.srvc--> ~transaction    ZCUS3
              ~sources        zcus1
Is the above settings right ?
Please do help me.
Thanks ,
Sathya

Table for flag STLKZ in CS03 transaction

Hi Guru,
in the transaction CS03 for some materials I see in the column (ASM ASSEMBLY STLKZ field) who wants a flag to indicate that this material is related to a bom.
In which table can I see the flag STLKZ?
Thank for all !

Hello Marco,
This field is not a table field therefore it is not stored on any table that you can refer for a direct link. This field is filled in if an entry is found table MAST for that component. Table MAST is a table for material/Plant BOMs. The assembly indicator is set If the component was is found on the header material on a BOM. The system checks the table MAST to see if that material was ever assigned to a BOM number (STLNR).
In this case, materil A will be set assembly indicator in BOM B since it is a header material of a BOM. This indicator is set no matter what the usage the BOM has. You can find what BOM it is linked . You can then use MAST-STLNR to check tables STPO for components.
There is also another field checked when setting this flag, There is a field in the table MARA for storing low-level code. This
field is also considered for setting the flag.Low level flags are changed based on bom levels
Hope this information helps.
Thanks
Amber

Table for user status field in CJ20n transaction project defination

HI ALL,
what is table for user status field in CJ20n transaction project defination creation. This field is in Basic Data tab.
Thanks.

Hi,
Check following tables for Usre status:
TJ30 - User status
TJ30T - Texts for user status
TJ20 - Status profile
JEST - Object status
JSTO- WBS status profile.
Check this code:
REPORT zps_get_userstatus .
PARAMETERS: p_posid LIKE prps-posid.
*-- Constants
CONSTANTS: gc_yes(1) TYPE c VALUE 'X',
 gc_no(1) TYPE c VALUE ' '.
*-- Variables
DATA: l_objnr LIKE prps-objnr.
*-- Internal tables
DATA: BEGIN OF lit_jest OCCURS 0,
 objnr LIKE jest-objnr,
 stat LIKE jest-stat,
 END OF lit_jest.
DATA: BEGIN OF lit_jsto OCCURS 0,
 objnr LIKE jsto-objnr,
 stsma LIKE jsto-stsma,
 END OF lit_jsto.
DATA: BEGIN OF lit_status OCCURS 0, "Combination of JEST & JSTO
 objnr LIKE jest-objnr,
 stsma LIKE jsto-stsma,
 stat LIKE jest-stat,
 END OF lit_status.
DATA: BEGIN OF lit_usrsta OCCURS 0, "Uer status for all wbs
 objnr LIKE jest-objnr,
 stsma LIKE jsto-stsma,
 stat LIKE tj30t-estat,
 txt04 LIKE tj30t-txt04,
 END OF lit_usrsta.
DATA: BEGIN OF lit_usrtxt OCCURS 0, "User Status text - TJ30T
 stsma LIKE tj30t-stsma,
 stat LIKE tj30t-estat,
 txt04 LIKE tj30t-txt04,
 END OF lit_usrtxt.
* get WBS object number
SELECT SINGLE
 objnr FROM prps
 INTO l_objnr
 WHERE posid = p_posid.
* get WBS active status from table JEST
SELECT
 objnr
 stat
 FROM jest INTO TABLE lit_jest
 WHERE objnr = l_objnr AND
 inact <> gc_yes.
* get WBS status profile from table JSTO
SELECT
 objnr
 stsma FROM jsto
 INTO TABLE lit_jsto
 WHERE objnr = l_objnr.
* combine JEST and JSTO table for user status
LOOP AT lit_jest.
IF lit_jest-stat CP 'E++++'.
 READ TABLE lit_jsto WITH KEY
 objnr = l_objnr.
 IF sy-subrc = 0.
 lit_status-objnr = lit_jest-objnr.
 lit_status-stsma = lit_jsto-stsma.
 lit_status-stat = lit_jest-stat.
 APPEND lit_status.
 ENDIF.
ENDIF.
CLEAR: lit_jsto, lit_status.
ENDLOOP.
* get text for user status
SELECT DISTINCT
 stsma
 estat
 txt04 FROM tj30t
 INTO TABLE lit_usrtxt
 FOR ALL ENTRIES IN lit_status
 WHERE stsma = lit_status-stsma AND
 estat = lit_status-stat AND
 spras = sy-langu.
Let me know if you have any question.
Regards,
RS

Table and field names for transaction VB13

Dear experts,
Which are table-fields where the field values in table control(Mat entered, Name, Material, Description, ...) for transaction VB13 stored?
Thanks and Regards,
Sumit Nene.

Thanks all!!
I found the fields as--
mat entered--KOTD001     MATWA
Name     MAKT     MAKTX
Substitute Material     KONDD     SMATN
Short text for sales order item     MAKT     MAKTX
Substitute unit of measure     KONDD     MEINS
Reason for material substitution     KONDD     SUGRD
I just didnt get the tab-field for last check box for alternative materials.
Regards,
Sumit Nene
Edited by: Sumit Nene on Aug 17, 2009 1:07 PM

TO FIND TABLES FOR MASTER DATA TRANSACTIONS

HI , When we create a customer, the information is updated in structure RF02D and some tables like KNA1 are updated ..
How can we find the tables for master data transactions.?
please reply...
thanks.

Hi,
I entered into the TC : ST05, Activated the trace then I created a customer, then I came back and deactivated trace, then I clicked on display it gave me a list ( yellow color list ) ... Wat do u mean by update methods here ...
Thanks
SK SIDDIQUI

Creation of New Table for Delivery Output Type.

Hi Guys,
I need to replace an existing table by creating a new Table in the existing Access Sequence with the combination of "Ship to Party/Product Hierarchy".
Logistics>Shipping>basic Shipping functions>Output determination>Maintain Condition Tables-->maintain output condition table for deliveries.
I am choosing a new table by the name 902, but i am not getting the field " PRODH Product Hierarchy" on the right hand side to choose from.
I checked the field catelog also. Firstly the field catelog was also not having the field, and then i added the field in it by choosing new entries.
I guess i am missing some step in between, thats why the new field (PRODH) is not showing on the right hand side while creation of the condition table.
One more thing, when i am seeing the Field Catelog, i am able to see a very large number of fields, then why only a few are appearing during creation of a new table??????
Can you guys correct me and let me find a way.????
Thanks very much indeed.
Regards,
Vivek

Hi If u have already the field in FC u can add with new entries .
Try with ,enter t- code SE11, enter KOMB- it will ask for access key get from basis and add u r Field catalog
Field catalog for condition key: output determination
If at all u want a new field tao add to u r FC u Can try with userexit.
1)ADDING OF NEW FIELDS IN PRICING
In Pricing in SD the fields on the basis of which pricing is done are derived from the FIELD CATALOG which is a structure KOMG .This structure is used to transfer transaction data to the pricing procedure in SD and is also known as communication structure.This structure KOMG consists of two tables KOMK for Header related fields and KOMP for item related fields.
 The fields which are not in either of the two tables KOMK and KOMP
cannot be used in pricing .Sometimes a need arises when the pricing
is to be based on some other criteria which is not present in the form of fields in either of the two tables.
This problem can be solved by using USEREXITS which are provided for pricing in SD.
Pricing takes place both when the SALES ORDER ( Transaction VA01) is created as well as when INVOICING ( Transaction VF01) is done.Hence SAP provides 2 userexits ,one for sales order processing which is
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
Depending upon which table (KOMK or KOMP) the new fields were inserted we use either of the above two userexits.These userexits are found in include MV45AFZZ of the standard SAP sales order creation program SAPMV45A.
In the case of userexit which will be called when invoicing is done ,these
are provided in the include RY60AFZZ which is in the standard SAP
program SAPMV45A. The name of the userexits are same. i.e
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
These userexits are used for passing the data from the communication structure to the pricing procedure, for this we have to fill the newely
created field in the communication structure KOMG for this we fill the code in the above userexit using the MOVE statement after the data that
has to be passed is taken from the database table by using the SELECT statement. The actual structure which is visible in these userexits and which is to be filled for that particular field is TKOMP or TKOMK.
Before the coding for these userexits is done ,it is necessary to create a new field in either of the two tables KOMK or KOMP .For this purpose
includes are provided in each of them .
To create the field in header data(KOMK) the include provided is KOMKAZ
and to create the field in item data(KOMP) the include provided is KOMPAZ.
One possible example for the need of creating new fields can be e.g. Frieght to be based upon transportation zone ,for this no field is available in field catalog and hence it can be created in KOMK and then above userexits can be used to fill the transportation data to it.
2)The other method of finding userexit is to find the word USEREXIT in the
associated program of the transaction for which we want to determine userexit using SE38.
3)The other method of finding userexits is to find the include in case of SD/MM applications where the userexits are located ,this can be found in the SAP reference IMG generally in the subfolder under SYSTEM MODIFICATION.
Some other examples of userexits in SD are:
Message was edited by:
 SHESAGIRI GEDILA

Tables for Transaction

Similar Messages

Maybe you are looking for