Tables in SD and the details

Hi guys,
I need your assistance to know the Table names and the corresponding keys for the following fields.
We want to develop a report  that has the following fields(ABC) .
The report needs the following details in an Inquiry(A) ,if a Quotation exist for the same  need the following Quotation detail(B) ,if Sales order Exist for the Quotation(C) ,need the Following Sales Doc. details.
A.Inquiry details .Fileds needed
1. Inquiry Date
2.created by
3.closing date/Due date
4.Estimated Value
5.Customer
6.Material.
B.Quotation.
1.Quotation date
2.Quotation Amount
3.Created by
4.Reason for Rejection/Status fo Quotation
C.Sales Document
1.Sales Order On.
2.Amount.
3.Status.
4.good delivered date
Regards.

hi
A.Inquiry details .Fileds needed
1. Inquiry Date
2.created by
3.closing date/Due date
4.Estimated Value
5.Customer
6.Material.
B.Quotation.
1.Quotation date
2.Quotation Amount
3.Created by
4.Reason for Rejection/Status fo Quotation
All ABove you can get in VBAP table
C.Sales Document
1.Sales Order On. - VBAK
2.Amount. - VBAK / VBAP
3.Status. What status you are looking for?
4.good delivered date - VBEP

Similar Messages

  • From which table i can get the details of cancled documents

    Hi All,
    here is an quarry,
    Iam haveing an Z report on purchase tax which has all tax report.
    but now the user want to same details for cancled document
    also.So can any help me from which table i can fetch the data
    urgent ! pls help me out!
    Regards,
    Rajashekar

    Cancelled documents will not be stored in Diff tables..
    It will be stored in the Same tables..
    For PO
    EKKO header level
    EKPO  Item Level
    EKBE Po History
    Material Doc
    MKPF  Header
    MSEG Item
    Invoice
    RBKP  Header
    RSEG Item

  • Just updated to LR5.4 on my mac and the Detail Panel in the Develop module is missing. How to fix?

    How do you fix the missing Detail panel in the Develop module? I just updated on the Mac to LR 5.4.

    Right-click on any RH panel header in Develop and put a check mark next to the Detail panel

  • Summary and the Detail Report

    Hi All,
    I want to create a summary and detail report in two different layouts on one single report,based the input summary or the detail report shoud execute...,how to do the same.
    Thanks in advance
    C.Somasundaram

    Hi,
    bring your two different layouts in seperate frames and write format triggers on this frames to show or suppress them (depending on your input). Connect the two frames with an collabsing anchor.
    Regards
    Rainer

  • How to create a simple input form in BPC 10.0 and the details are below

    Hi Experts,
    I would like to know how to create attached input form and what are the dimension would require to use in order to populate correct report
    Please provide your comments and the sample report has been attached.
    MGA Index
    Column
    Head Count Planning Required
    Approver authority
    Asset
    Row_Cost Center
    Business Development
    Finance
    Procurement -
      C&P
    Legal
    HSS &  Environment
    Petroleum Engg
    Drilling
    Subsurface
    Thanks in advance.
    Regards,
    SK.

    Hello,
    The new update of Muse allows you to use the Webforms widget with a non Business Catalyst host as well.
    However, Captcha is something which currently cannot be used via Muse without using Business Catalyst as host.
    This document might be of some help : http://forums.adobe.com/docs/DOC-3581
    Regards,
    Sachin

  • Table of contents and the order of multiple text frames flowing across pages

    I have a multi-page document,
    on each page, there are 2 text frames:
    - A text frame for containing a PAGE TITLE
    and
    - A text frame, flowing from one page to another containing: a MAIN TITLE, a SECTION TITLE, and flowing body copy (on page 1); and another MAIN TITLE, a SECTION TITLE, and flowing body copy; (on page 2)
    When I generate a TOC, using the Page, Main and Section Titles styles, the expected outcome would be:
    Page Title             1
       Main Title           1
    Section Title          1
    Page Title             2
       Main Title           2
    Section Title          2
    But because the Main title and Section titles are all within one flowing text frame and the content flows across multiple pages, and each of the Page Titles are within 2 separate text frames, the actual TOC generated is:
    Page Title             1
       Main Title          1
    Section Title         1
       Main Title           2
    Section Title          2
    Page Title             2
    ...where the TOC lists all the TOC items from the flowing text frame in one grouping first, then the individual free standing text frame title.
    QUESTION: Is the only way to automatically rectify this is to combine all the text into one flowing text frame? or is there another workaround?
    Have played with the left/right, top/bottom alignment of the individual text frames; also experimented with the object layering, to no avail..
    Thanks for any insights.

    I ended up using a product called InFlow from EmSoftware.  The solution offers a plugin to InDesign that builds pages on the fly when there is overset text.  The setup is pretty minimual and it seems easy to use.  The only drawback that the plugin MAY have is that it does not remove the pages it built if the pages are not needed from record to record.  I could not test this myself since my test data did not test more then one record, but when I turned my proof set off, the pages that were built were still on screen.  It does seem to work well for what we are looking to do, so if anyone is looking for something that will build pages on the fly in situations where the "Dynamic Story Handling" is not available, I would suggest looking into this.

  • How to use external table - creating NFS mount -the details involved

    Hi,
    We are using Oracle 10.2.0.3 on Solaris 10. I want to use external tables to load huge csv data into the database. This concept was tested and also found to be working fine. But my doubt that : since ours is a J2EE application, the csv files have to come from the front end- from the app server. So in this case how to move them to the db server?
    For my testing I just used putty to transfer the file to db server, than ran the dos2unix command to strip off the control character at the end of file. but since this is to be done from the app server, putty can not be used. In this case how can this be done? Are there any risks or security issues involved in this process?
    Regards

    orausern wrote:
    For my testing I just used putty to transfer the file to db server, than ran the dos2unix command to strip off the control character at the end of file. but since this is to be done from the app server, putty can not be used. In this case how can this be done? Are there any risks or security issues involved in this process? Not sure why "putty" cannot be used. This s/w uses the standard telnet and ssh protocols. Why would it not work?
    As for getting the files from the app server to the db server. There are a number of options.
    You can look at it from an o/s replication level. The command rdist is common on most (if not all) Unix/Linux flavours and used for remote distribution and sync'ing of files and directories. It also supports scp as the underlying protocol (instead of the older rcp protocol).
    You can use file sharing - the typical Unix approach would be to use NFS. Samba is also an option if NTLM (Windows) is already used in the organisation and you want to hook this into your existing security infrastructure (e.g. using Microsoft's Active Directory).
    You can use a cluster file system - a file system that resides on shared storage and can be used by by both app and db servers as a mounted/cooked file system. Cluster file systems like ACFS, OCFS2 and GFS exist for Linux.
    You can go for a pull method - where the db server on client instruction (that provides the file details), connects to the app server (using scp/sftp/ftp), copy that file from the app server, and then proceed to load it. You can even add a compression feature to this - so that the db server copies a zipped file from the app server and then unzip it for loading.
    Security issues. Well, if the internals is not exposed then security will not be a problem. For example, defining a trusted connection between app server ad db server - so the client instruction does not have to contain any authentication data. Letting the client instruction only specify the filename and have the internal code use a standard and fixed directory structure. That way the client cannot instruct something like +/etc/shadow+ be copied from the app server and loaded into the db sever as a data file. Etc.

  • I dropped my ipod5 on a stone table (really hard) and the color (little part) came off! It's not a big problem but I just got it not long time ago. Can Apple repaire it? Will it be free? P.s. That part it's like 1mmX1mm not big, but I just want to know.

    Like I say I'm the title... A little part "colour" on my iPod5 came off after I dropped my iPod on a stone table.
    I just want to know that can Apple repair it or it doesn't count on the guarantee? It's not a big problem but I just got it few month ago...It's brand new! Do that's why I'm curious..:) and if they can repair... Will it gonna be free?

    When you get your iPod repaired / replaced... do yourself a favor, spend a few more bucks and but a case, like a Lifeproof or Griffin Survivor. Both cover the entire iPod and offer protection against drops and falls, weather, sand, dust, etc. and will at least minimize if not prevent damage to your iPod.  Good luck.

  • Table of tcode and the corresponding programs/packages

    Hi everybody,
    Is there a table that contains a column of transaction codes and a column of their corresponding programs/packages?
    Thanks,
    Roy

    Hi Roy,
    Check the tables DD02L & DD03L in t-code SE16 & also check t-code SE81, you should get the info you are looking for.
    <REMOVED BY MODERATOR>
    Regards,
    Vivek
    Edited by: Alvaro Tejada Galindo on Feb 6, 2008 10:36 AM

  • Can the Performance Detail reports be exported as PDF without the Detail Table?

    We previously generated significant numbers of Performance Detail reports out of SCOM 2007 R2 as PDF files, and the 'Detail Table' did not show.
    Now that we are on SCOM 2012 R2, the same reports show the 'Detail Table' when exported to PDF. We report on 6 to 12 months of data, so these tables are huge, and are also useless for our purposes.
    Is there some way to suppress the Detail Table when exporting a Performance Detail report to PDF?

    Hello,
    Please see if the method in the following post can meet your requirements:
    SCOM reports on performance counters for large groups of servers
    http://www.bictt.com/blogs/bictt.php/2010/11/28/scom-reports-on-performance-counters-for-large-groups-of-servers

  • Problem with a master tree table and its detail table

    Hello,
    I have a master treetable showing on a page and a separated detail table below the treetable on the same page.
    To make the things clear, three tables are involved here: one master and one detail table to compose the treetable, and another detail table for the current selected row in the treetable.
    Things usually work fine when operating on the detail table. However, if I create or delete some rows from the detail table and press Rollback, some unwanted behaviour happens.
    In facts, on Rollback, both the master treetable and the detail table are redrawn on the page.
    However, once refreshed, despite the current selected row in the treetable still appears as the one before clicking Rollback (suppose not the first one), the detail table always correspond to the first row of the master treetable.
    Is there a way to either make the current selected row the first one the master treetable, or (preferred) to make detail table reflect the visible current selected row in the treetable?
    thanks

    jabr,
    ok . i will go through
    but if u don mine here john n timo says for me. pls check it.
    on rollback
    create insert options
    Edited by: Erp on Oct 12, 2011 5:14 AM
    Edited by: Erp on Oct 12, 2011 5:15 AM

  • TS3276 When i open my mail box. It showed 3 column instead of 1 side is column and the receiving email is upper and details would be at bottom. What i need is as what your explanation on in box email all at upper and detail showed as below. How can i set

    Hi,
    I'm new in Apple MAC. Now i'm using mail and found screen showed was different from what I need. Now is seperatte into 3 column and the middle is contain inbox message the the right side is details. But what i need is the Inbox should be at upper and the details should be at lower. Pls advise how to set?
    Alvein

    Sounds like you want the "classic layout" (as in, the way Mail looked before Lion).  Go to Mail -> Preferences, click the Viewing icon and check "Use classic layout."

  • ADF BC - One Master and Two Detail pages How To?

    I have an existing ADF BC .jspx master-detail page that works fine. It shows one product as the master (read-only; no navigation controls) and assocatied customer feedback as the detail (multiple records; read-only.) Now I also want to compute some averages from the same table used to create the detail view object. I have created a second view object because this requires a separate query that calculates aggregate values. I want to take advantage of using view links so that this 2nd view object is automatically linked to the master record via the primary key.
    My question is how can I link this into the existing master-detail data control so that I can drag/drop it to include id on the existing .jspx page and the primary key linkages will be handled automatically?
    Tables
    Product
    Feedback
    View Objects
    ProductView
    FeedbackView
    FeedbackAVGView
    Current ViewLink
    ProductFeedbackViewLink = ProductView + FeedbackView
    Current DataControl
    ProductFeedbackViewLink-Instance
    Data Control is displayed on .jspx page; want to also include 3rd View Object, FeedbackAVGView, in the Master-Detail relationship and display on the .jspx page

    Thanks for the reply. The existing customer feedback view object displays the customer's text feedback (testimonials) - these will be displayed in a read-only table with multiple records.
    The new view object aggregates the ratings score from the customer feedback (same FEEDBACK database table) and will use a form to display the results (not multiple rows.) The PK is included in the aggregate view object query.
    Note there is already an existing viewlink between the PK (Master) and FK (Feedback) - in the data control, this viewlink is an instance of the Master View Object and the Customer Feedback View object. Now that I have created a third view object, should I create another View Link between the Master View Object and the Customer Feedback AVERAGES View Object? If I do this, how do I include it in the existing .jspx page? If I add this new View Link to the Application Module I will have two different Data Controls:
    Data Control #1: Master (Product) View Object + Customer Feedback View Object #1 (implemented as a master-detail read-only form/table on a .jspx page)
    Data Control #2: Master (Product) View Object + Customer Feedback AVG View Object #2
    I'm confused as to how to integrate the second customer feedback view object into the existing Data Control / Master-Detail read-only form/table on my .jspx page?
    thanks

  • Get the table's rowid of the session that is locking in RAC database

    I am a developer and not a DBA and I need to find th correct query to find the exact rowid of the record locked on a table. This is for a RAC database and locked record can be from the web form in oracle application server. When I try to get the correct row id, I get the following error:
    ORA-01410 - Invalid row id
    For the criteria, the output is Dbms_Rowid.rowid_create(1, -1, 36, 7845, 0), why I get a -1 for the ROW_WAIT_OBJ#?
    Additional Information: The lock type is DML and the lock mode is: Row Exclusive, the table is locked and the program is web oracle forms executiong.
    I am executing the query in Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
    How to accomplish gettting the correct rowid? Below is the selection criteria I have:
    select vs.inst_id,
    vs.audsid audsid,
    locks.sid sid,
    locks.type,
    locks.id1 id1,
    locks.id2 id2,
    locks.lmode lmode,
    locks.request request,
    locks.ctime ctime,
    locks.block block,
    vs.serial# serial#,
    vs.username oracle_user,
    vs.osuser os_user,
    vs.program program,
    vs.module module,
    vs.action action,
    vs.process process,
    decode(locks.lmode,
    0, '0 None',
    1, '1 NULL',
    2, '2 Row Share',
    3, '3 Row Exclusive',
    4, '4 Share',
    5, '5 Share Row Exclusive',
    6, '6 Exclusive', '?') lock_mode_held,
    decode(locks.request,
    0, '0 None',
    1, '1 NULL',
    2, '2 Row Share',
    3, '3 Row Exclusive',
    4, '4 Share',
    5, '5 Share Row Exclusive',
    6, '6 Exclusive', '?') lock_mode_requested,
    decode(locks.type,
    'MR', 'Media Recovery',
    'RT', 'Redo Thread',
    'UN', 'User Name',
    'TX', 'Transaction',
    'TM', 'DML',
    'UL', 'PL/SQL User Lock',
    'DX', 'Distributed Xaction',
    'CF', 'Control File',
    'IS', 'Instance State',
    'FS', 'File Set',
    'IR', 'Instance Recovery',
    'ST', 'Disk Space Transaction',
    'TS', 'Temp Segment',
    'IV', 'Library Cache Invalidation',
    'LS', 'Log Start or Log Switch',
    'RW', 'Row Wait',
    'SQ', 'Sequence Number',
    'TE', 'Extend Table',
    'TT', 'Temp Table',
    locks.type) lock_type,
    vs.row_wait_obj# row_wait_obj#,
    vs.row_wait_file# row_wait_file,
    vs.row_wait_block# row_wait_block#,
    vs.row_wait_row# row_wait_row#,
    dbms_rowid.rowid_create ( 1, vs.ROW_WAIT_OBJ#, vs.ROW_WAIT_FILE#, vs.ROW_WAIT_BLOCK#, vs.ROW_WAIT_ROW# ) rowid_created,
    objs.owner object_owner,
    objs.object_name object_name,
    objs.object_type object_type,
    round( locks.ctime/60, 2 ) lock_time_in_minutes,
    from gv$session vs,
    gv$lock locks,
    dba_objects objs,
    dba_tables tbls
    where locks.id1 = objs.object_id
    and vs.sid = locks.sid
    and objs.owner = tbls.owner
    and objs.object_name = tbls.table_name
    and objs.owner != 'SYS'
    -- and locks.type in ('TM', 'TX')
    order by lock_time_in_minutes;
    Edited by: user3564713 on Jun 10, 2012 10:56 PM

    Firstly, read this thread
    Identifying locked rows
    And the last bit from Randolf
    >
    It is a common misconception that you can locate a locked row in Oracle via a query. The point is that the information that you're querying only gets populated in case of a blocking lock, and even then not in every case, since you might have blocking locks that do not refer to a particular row.
    Oracle stores the lock information within the block, so if you identified in which block the row is located that you've attempted to lock, you could get detailed information about the row locks of that block by performing a block dump.
    Other than that Oracle doesn't maintain this information anywhere else and it is only externalized for blocking situations - it is a matter of design that there is no central lock manager in Oracle that would inherently limit scalability, hence the downside of that approach is that there is no central information pool where you could obtain detailed information about row level locks.
    >
    However, if you see support note "Sample Code to Select from a Table EXCLUDING Locked Rows [ID 186531.1]"
    You can take the same code from the script in that note to identify rowid of the locked rows.

  • Extractor for Purchasing Conditions for tables EKKO, EKPO and KONV

    Hi Experts,
    I want to know if there is an Extractor for Purchasing Conditions with fields in tables of Origin: EKKO, EKPO and KONV.
    Or, at least an extractor with the table KONV.
    Or, how I can look for it.
    Any feedback, will be really apreciated.
    Thanks in advance

    Hi David,
    Adding to what said above.
    Observe the Fileds in the Datasources and the details.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/5c/8ea0e626e442efb109232830faded9/frameset.htm
    Regards,
    Ram.

Maybe you are looking for