Tablespace error
While i am creating a table in my schema i got an error like the following
ORA-01630: max # extents () reached in temp segment in tablespace.
shall i want to increase the max extent of my tablespace?
This might not be a problem with the TEMP tablespace. You will also receive this error when you are creating indexes associated with a table as these are first created as 'TEMP' segments in the tablespace. When the index creation is completed, the TEMP segment is 'renamed' to the index name.
Which tablespace is mentioned in the error?
What is the process you are using to create the table? Are you just creating the table, using create table as select (CTAS) or creating/loading the table at the same time?
If you increase the default storage parameters of your tablespace, but your create table command still has a maxextents value, you can run into the problem again.
Regards,
Daniel Fink
Similar Messages
-
Reg: unable to extend tablespace error.
Hi,
On the database we work we got Unable to extend tablespace error. Suddenly in one night data was flooded into the tablespace.We have not run any precedure or On line reorganisation on that TS.
Is there any way that we can know what acivity had on that Tablespace during that night.We dont have audit option set in the database.
Thanks,
Venkat.It really depends on what, exactly, you're looking for and what, exactly, happened.
If you have the archived log files from the night in question, that might tell you what statement generated a lot of redo. You'd miss certain unlogged operations, though, and that doesn't give you any information about what process caused the flood. If you've taken the basic precaution of getting base-line table sizes, querying DBA_SEGMENTS or DBA_EXTENTS to get the current size ought to show which tables have grown and is a lot less work than configuring Log Miner.
Log Miner would also tend to miss situations where a table allocated a new, rather large, extent.
Log Miner would tend to miss situations where an old manually allocated tablespace became fragmented
Justin -
Create tablespace error on ASM
SQL> CREATE TABLESPACE "SYS-AUDIT_D1"
2 DATAFILE '+DATA/LUCMT/SYS_AUDIT';
CREATE TABLESPACE "SYS-AUDIT_D1"
ERROR at line 1:
ORA-01119: error in creating database file '+DATA/LUCMT/SYS_AUDIT'
ORA-17502: ksfdcre:3 Failed to create file +DATA/LUCMT/SYS_AUDIT
ORA-15173: entry 'SYS_AUDIT' does not exist in directory 'LUCMT'
ANY IDEA?
thnx in advancebcm@bcm-laptop:~$ oerr ora 15173
15173, 00000, "entry '%s' does not exist in directory '%s'"
// *Cause: The specified alias did not exist in the given directory.
// *Action: Correct the alias path and try again.
bcm@bcm-laptop:~$ oerr ora 17502
17502, 00000, "ksfdcre:%s Failed to create file %s"
// *Cause: file creation failed due to either insufficient OS permission or
// the file already exists
// *Action: check additional error messages
bcm@bcm-laptop:~$ oerr ora 1119
01119, 00000, "error in creating database file '%s'"
// *Cause: Usually due to not having enough space on the device.
// *Action: -
Transportable tablespace error
Oracle version 9.2.0.8
OS - Windows XP
I am doing tablespace transport from one database to another database.
My export went good but while importing I am getting some errors
Not only that but I have to restart instance every time I try import
C:\>exp userid='sys/**** as sysdba' transport_tablespace=y tablespaces=xyz5 file='C:\u03\expor\xyz5.dmp' log='C:\u03\expor\xyz.log'
Export: Release 9.2.0.8.0 - Production on Sat Mar 22 22:50:20 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
Note: table data (rows) will not be exported
About to export transportable tablespace metadata...
For tablespace EXAMPLE3 ...
. exporting cluster definitions
. exporting table definitions
. . exporting table
. exporting referential integrity constraints
. exporting triggers
. end transportable tablespace metadata export
Export terminated successfully without warnings.
C:\>imp USERID='sys/** AS SYSDBA' TRANSPORT_TABLESPACE=y DATAFILES='C:\oracle\oradata\spri\xyz5.DBF' TABLESPACES=xyz5 FILE='C:\u03\expor\xyz5.dmp'
Import: Release 9.2.0.8.0 - Production on Sat Mar 22 23:21:58 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
Export file created by EXPORT:V09.02.00 via conventional path
About to import transportable tablespace(s) metadata...
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
. importing SYS's objects into SYS
IMP-00017: following statement failed with ORACLE error 3113:
"BEGIN sys.dbms_plugts.beginImport ('9.2.0.8.0',178,'2000',NULL,'NULL',252"
"78,7151,1); END;"
IMP-00003: ORACLE error 3113 encountered
ORA-03113: end-of-file on communication channel
IMP-00000: Import terminated unsuccessfullyHow the error of exp and imp will come in alert.log file?
It will come in the log file we specified in parameter. I already posted that information. -
Create a dictionary managed tablespace error.
When I use the following script to create a tablespace.
create tablespace DATA01
datafile 'c:\oracle\oradata\orawin2k\U04\data01.dbf' size 2M
EXTENT MANAGEMENT DICTIONARY;
But the oracle return this error.
ORA-12913: Cannot create dictionary managed table.
My Oracle Server is 9i Release in Window 2000.
Does any one know why? Please Help.Check with docu: Oracle9i Database Error Messages
Error means "An attempt was made to create a dictionary managed tablespace in a database whose SYSTEM tablespace is locally managed."
So you can't create any DMTs. -
Hello,
While creating a tablespace with datafile size 2 Gb , i get an error
ORA-19502: write error on file "/u17/oradata/ABC/xxx.dbf",
blockno 84416 (blocksize=16384)
ORA-27072: File I/O error
Linux-x86_64 Error: 9: Bad file descriptor
Additional information: 4
Additional information: 84416
Additional information: 937984
There is 17 GB free space... i checked this using df -h /u17
What could be the reason ?
I tried to check the error on google...i just shows description " Check the file "
Please help...ThanksHi Erka,
Im creating a datafile of 2 Gb in size...
I found out 1 thing....why im not able to create such a file ...its because....
When i say....df -h /u17 it shows available only 800M mounted on / .......and im creating 2GB file
I want to use another filesystem which also has /u17/oradata mounted on /dev/sda5....it has 17Gb free space
Can you please tell me how do i use this filesystem and mount point.... -
I'm trying to insert into a table and i'm getting error, ORA-01653.ORA-01653: unable to extend table name.name by 1024 in tablespace ATREPORT. i HAVE ADDED A NEW DATAFILE TO THE TABLESPACE BUT I'M GETTING THE SAME ERROR
my error:
OSD-04005: SetFilePointer() failure, unable to read from file
O/S-Error: (OS 112) There is not enough space on the disk.
ORA-06512: at "OWBR.WBPRTI", line 562
ORA-06512: at "MIGRA_BRR.PCK_OLD_CHEQUES_DESC", line 798
ORA-06512: at "MIGRA_BRR.PCK_OLD_CHEQUES_DESC", line 1342
ORA-01653: unable to extend table OWBR.WB_RT_FEEDBACK by 8192 in tablespace OWBR
ORA-27059: skgfrsz: could not reduce file size
OSD-04005: SetFilePointer() failure, unable to read from file
O/S-Error: (OS 112) There is not enough space on the disk.
ORA-01653: unable to extend table OWBR.WB_RT_FEEDBACK by 8192 in tablespace OWBR
ORA-27059: skgfrsz: could not reduce file size
OSD-04005: SetFilePointer() failure, unable to read from file
O/S-Error: (OS 112) There is not enough space on the disk.
ORA-06512: at "MIGRA_BRR.PCK_OLD_CHEQUES_DESC", line 2545
I try to add a DATAFILE or increase size on Tablespace and i cant. What can i do? The tablescape OWBR have a table WB_RT_FEEDBACK that OWB didnt purge, and it have more than 27 milion lines!!
Please, someone help me! -
Transportable tablespace errors
Hi experts
Could you please tell me how to resolve this?
connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "ABCD"."SYS_IMPORT_TRANSPORTABLE_01" successfully loaded/unloaded
Starting "XYZ"."SYS_IMPORT_TRANSPORTABLE_01": DDEEF/******** directory = tt_import_dir dumpfile = dev_tt.dmp transport_datafiles = /apps/oracle/oradata/dev/datafile1_data-01.dbf, /apps/oracle/oradata/dev/datafile2_data-01.dbf, /apps/oracle/oradata/dev/datafile3_data-01.dbf remap_schema=dev_xxx:xxx14 remap_schema=dev_yyyy:yyyyy14 remap_schema=dev_zzzz:zzzz14 remap_tablespace=dev_zzzzz_data:zzzz14_data remap_tablespace=dev_yyyyy_data:yyyyt14_data remap_tablespace=dev_zzzzz_data:zzzzz14_data
Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
ORA-39123: Data Pump transportable tablespace job aborted
ORA-19721: Cannot find datafile with absolute file number 11 in tablespace REPORT14_DATA
Job "ABDC"."SYS_IMPORT_TRANSPORTABLE_01" stopped due to fatal error at 10:48:35
thanks
seemaSeema,
This is what is mentioned about the error,
>
ORA-19721: Cannot find datafile with absolute file number string in tablespace string
Cause: Can not find one of the datafile that should be in the Pluggable Set.
Action: Make sure all datafiles are specified via import command line option or parameter files. >
So it seems the exported dump is not complete. Retry by taking export again and than try importing it .
HTH
Aman.... -
11g Publisher Bursting tablespace error
Hi,
I am getting the following error message when bursting in 11g Publisher 11.1.1.5. The total number of files to burst is 12793 and they are each 122kb. This gives a total of 1524.16602 mb (1.48 gb).
ORA-01654: unable to extend index DEV_BIPLATFORM.IDX_XMLP_JOB_PJID by 8 in tablespace DEV_BIPLATFORM
I have increased the size of the tablespace and it is now as follows:
Tablespace Size (MB) Free (MB) % Free % Used
DEV_BIPLATFORM 2000 1975.5 99 1
I have tried to burst a subset of the data and i am still getting the error above.
Any tips on how to trouble shoot this one?bump, getting the same error.
-
DROP EXAMPLE tablespace Error : Plz help me
Hi all,
I try to drop the EXAMPLE tablespace but I get this error :
alter tablespace example offline;
DROP TABLESPACE example INCLUDING CONTENTS AND DATAFILES ;
ORA-29857 : domain indexes and / or secondary objects exist in the tablespace
I'm using Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 on Linux server.
Please tell me :
-The utility of this tablespace?
-how to do to drop this tablespace?
ThanksThose users are simple demo users, they are created by default on 9i and on 10g R1 and R2 those are created if at db creation time you check the demo account check box or if you choose the easy install mode with default database.
Those accounts should not be present in a production environment, and in case they are, they should remain 'lockded and expired'. So by dropping those users nothing happens, you may rebuild those accounts whenever you want by running the scripts located at the ORACLE_HOME/demo, if they are not present, you must install them from the companion disk (10g).
~ Madrid -
Hi all
I am trying to create a tablespace, but i am getting the following error.
ORA-00604: error occurred at recursive SQL level 1
ORA-06553: PLS-213: package STANDARD not accessible
This is my command
create tablespace dummy_ts
logging
datafile '/home/oracle/admin/content/dummy_tblsp.dbf'
size 32m
autoextend on
next 32m maxsize 2048m
extent management local;
I dont know the reason why its happening.connect to the database as sys.
alter package dbms_standard compile
should resolve it.
However this message is usually a sign of bigger problems.
In that case you should run
$ORACLE_HOME/rdbms/admin/catalog.sql and
$ORACLE_HOME/rdbms/admin/catproc.sql
Sybrand Bakker
Senior Oracle DBA -
OEM 10g - reorganize tablespace error on invalid sort area size
Hi all,
When I try to reorganize a tablespace with OEM 10g, I get an error in the 3rd step (options) saying :
Invalid value for sort area size. The minimum value is 96 KB. My SGA management is set to AUTO.
Why this error on sort size area ?
Thanks for your help.Found a workaround. ( Not a real answer to the "why" )
My settings were : pga_aggregate_target : 400 MB
work_area_policy : AUTO
Following the documentation the sort_area_size should then default to 20% of SGA ( which is 1200MB ), and should thus be 240 MB, largely sufficient I would think ...
I now changed the work_area_policy to MANUAL, and the sort_area_size to 100MB, and then it works fine.
If anyone would have an explanation for this, it is still most welcome !
Linde -
Unable to extend temp segment by 4096 in tablespace error
Hi
Can some help me resolving this problem .which occured when i try to import some dump file to an user.
ORA-39171: Job is experiencing a resumable wait.
ORA-01652: unable to extend temp segment by 4096 in tablespace HDM_INDEX
i added 2 gb of datafile to the table space it is still shows the same .
any expert suggestion is highly apprciated.
thanks790072 wrote:
Hi
Can some help me resolving this problem .which occured when i try to import some dump file to an user.
Pl post details of OS and database versions, along with the complete import command and parameters used.
ORA-39171: Job is experiencing a resumable wait.
ORA-01652: unable to extend temp segment by 4096 in tablespace HDM_INDEX
i added 2 gb of datafile to the table space it is still shows the same .Pl identify the tablespace you added space to (and the commands used to add space)
>
any expert suggestion is highly apprciated.Pl post relevant sections from the database alert.log
>
>
thanks
ORA-1652 Error Troubleshooting [Document 793380.1]
ORA-01652: Estimate Space Needed to CREATE INDEX [Document 100492.1]
TROUBLESHOOTING GUIDE (TSG) - UNABLE TO EXTEND Errors [Document 1025288.6]
HTH
Srini -
Request of one report fails with error: unable to extend tablespace
Hi All,
When I submit one request of report, the request end up with error:
unable to extend temp segment by 128 in tablespace XXXX
The request costs too much tablespace in short time, but the temp is about 20 G large.
The sever have been add storage recently, but I don't know whether it is related to the performance issue, because the request had not such issue.
How do I deal with it ?
Thanks,
XinyaWhat report is it ?
Did you try and search metalink ?
How to handle 'ORA-01652: unable to extend the temp segment by 128 in tablespace' error messages? (Doc ID 1359238.1)
R12 Journal Entries Report (XLAJELINESRPT) Has Performance Issue Or Fails With Error: "java.sql.SQLException: ORA-01652: unable to extend temp segment by 128 in tablespace TEMP1" (Doc ID 1141673.1)
This forum may be the right one for your question - General EBS Discussion -
Amount of temporary tablespace size used for index rebuild
Hi All,
I want to know approximate amount of temporary tablespace size used for index rebuild. I need this information to avoid the insufficient temporary tablespace error during the huge index rebuild.
Is there a query or procedure to find it out.
Thank you.Hi,
While creating the index, the temporary segment is created in the permanent tablespace. So permanent tablespace must have sufficient space.
http://www.oracle-base.com/articles/10g/SpaceObjectTransactionManagement10g.php
http://aprakash.wordpress.com/2010/01/05/numeric-segment-name/
Anand
Maybe you are looking for
-
Infotype screen headers needs to be changed for all the infotypes
Hi Guys, This would be for a global implementation question. For the US for a particular region, the screen header needs to be changed for all the infotypes. The existing field (in the infotype header) is Employee Group which needs to be replaced wit
-
Installing a new OSX version, effects on bootcamp (W8.1)
Dear all, Soon OSX Yosemite will arrive and I just installed Windows 8.1 via Bootcamp on my Mac Book Air running the latest version of Mavericks. My question is, will this upgrade remove my bootcamp setup or effect it in any way? Also is it poss
-
How to set system, so that it validates the Applicant information.
Hi All, How to set the system, so that it validates the applicant information. Suppose we have already entered the details of the applicant for a job and after a period of time he would again apply, so how can system will validate that we have alread
-
Migration of an existing web site to Web Page Composer
Hello, I am investigating the options and the feasibility of the migration of an existing web site to a Web Page Composer (WPC) site. The web resources of the site can easily be copied to KM and used afterwards in WPC containers. However, they can ne
-
ITunes will not open full screen mode in Mavericks
Hello, Ever since a recent upgrade to Mavericks, iTunes will not open in full screen. When I click the full screen expander in the controls or in View>Enter Full Screen iTunes flashes the library and then back to the movie playing and makes the "funk