Tabular form for text item -save changes not working

Hello,
I have created a tabular form in which I have made one of the columns say deptno as an Text item using APEX_TEXT.ITEM package.
In my tabular form by default I have created it with all the buttons like with ADD ROW,CANCEL,SUBMIT(SAVE).
My problem is that whenever I make any changes to the text item for deptno column, and then try to save the changes by clicking SUBMIT - the changes are not taking place to the deptno text item column.
Can anyone help me out with this.
thanks.

hi Denes Kubicek.
the thing is that i have made it as text item because I have concatenated it with an popup image when clicked on it opens up an new popup window
which is a report containing dept table details. So if need to make a change to the deptno text item column in the parent window for a particular record
then i do through the popup window (like by selecting the deptno from the popup window - so that this value is returned to my parent window deptno text item column)
for this reason i have made the column deptno as an text item.
can you help me out with this issue.
thanks.

Similar Messages

VTML-Tags for text-to-speech do not work in Captivate 6 - are they working in Cap. 7 again?

I had a hart time to find out, that the functionality was "forgotten" to be programmed in the version 6.
Together with Neospeech I worked long to make single voices work in full functionality and it cost additional licence fee... unfortunately the voices sound tinny so I cannot really use them...and due to different time zones it is hard to find the error together with Neospeech
Now I see that Captivate 7 is available.
Is there already qualified info if the vtml tags work again like they did in older versions?
Adobe Support hotline was NO HELP at all, very unfriendly... only idea was, that I should get the test version and find out myself, pretty impertinent.

Hi
You might already know this, but stating it here to rule out the simple failure cases.
I have had a similar problem in the past using VTML tags inside Captivate. I used to type the slidenotes in my favorite editor and then copy paste the text from there to the slidenotes panel of Captivate. Turns out that my editor was using Unicode and hence the entire text pasted into Captivate slidenotes became unicode text, including the VTML markers. Though the pasted text "looked" fine the markers were messed up (for example, the double quotes around the value attributes looked like double quotes but they were actually multibyte unicode sequences) and this confused Neospeech. The output audio would be funny (for example it would read "Less Than...V...T...M...L...") or NeoSpeech will crash taking down Captivate along with it.
The fix was quite simple. I started typing the slide notes from within Captivate slide notes panel and everything worked fine after that. Alternately I could type in my favorite editor (after making sure that it is operating in Plain text mode) and then copy paste work flow also worked fine.
Another common mistake (at least, I do that often) is to select the speech agent from the drop down at the top of the dialog and forgetting to choose the speech agents for individual slide notes, which may still be referring to a non-neo-speech agent which does not understand the VTML tags.
No other software tool was required like the German Adobe Support team may have mentioned. I am using Captivate 7.
Cheers
Siva

Custom Popup on a Tabular Form for Multi Row Operation

I am trying to implement a custom popup on a tabular form that I can pass a value typed in to a text item like âNameâ to the popup so it can filter a list of names on what was already typed in.
Once a selection is made I need to have the selected name passed back to the text item.
This is easily done when not using a Tabular Form. Any ideas would be great?

Can someone please help me with this?
I've read the Thread:
"Custom Popup on a Tabular Form for Multi Row Operation",
and have tried following the instructions provided by Willi Firulais.
I've also tried to integrate the instructions provided by RWeide in response within the same Thread.
I cannot get the passBack function to Pass the value to the Calling Page.
(I've tried to organize the pertinent information as it pertains to my application,
and have included it here below:)
A. Calling Page (Page# 141)
1. HTML Header: (Page# 141)
<script> function callMyPopup(item) { var url;
url = 'f?p=&APP_ID.:143:&APP_SESSION.::::P143_ITEM:'+ item;
w = open(url,"winLov","Scrollbars=1,resizable=1,width=800,height=600");
if (w.opener == null) w.opener = self; w.focus(); }
</script>
2. Region Definition: (Orders) - SQL Query (Updateable Report)
a. Query:
select
'f01_'||to_char(rownum ,'FM0999') ITEM,
"ID",
"ID" ID_DISPLAY,
"ID_PROJECT",
"ID_SUPPLIER",
"DESCRIPTION",
"JOB_NO",
"QUANTITY",
"UNIT_PRICE",
"EXTENDED_PRICE",
"MANUFACTURER",
"SUPPLIER",
"PART_NO",
"GROUP_LIST",
"BILLED_PRICE",
"DATE_NEEDED",
"DATE_DELIVERED",
"SUPPLIER_TYPE",
rownum
from "#OWNER#"."OAX_MAT_ORDER_ITEMS07"
where job_no = :P141_JOB_NO
3. Report Attributes: (ITEM) - URL
javascript:callMyPopup('#ITEM#');
B. PopUp Page (Page# 143)
1. HTML Header: (Page# 143)
<script language="JavaScript"> function passBack(passItem1, passVal1)
{ opener.document.forms["wwv_flow"].SUPPLIER[&P143_ITEM.].value = passVal1;
close(); }
</script>
2. ITEMS:
P143_ITEM
3. Region Definition: (Suppliers) - SQL Query(Structured Query)
OAX_SUPPLIERS.ID
OAX_SUPPLIERS.NAME
4. Report Attributes: (NAME) - URL
javascript:passBack('&P143_ITEM.','#NAME#');
Thank you in advance for you help!

Text ID for text object MATERIAL does not exist - MM01

Hi All,
I am getting below error message when trying to save Material Master in MM01.
Text ID for text object MATERIAL does not exist
Message no. TD603
Diagnosis
You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
Procedure
You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
I have searched the forums but couldn't get relevant message.
Please assist.
Thanks,
Raj

Hi Jurgen,
This is the complete message i am getting.
Text ID for text object MATERIAL does not exist
Message no. TD603
Diagnosis
You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
Procedure
You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
If I enter MM02 and without changing anything if i save still i get this error message.
Thanks & Regards,
Raj

How do I Create a Tabular Form for an Intersection Table

Situation
There are three tables involved (PROJECT, STAFF, TASK)
PROJECT(PROJECT_ID, PROJECT_NAME)
STAFF(STAFF_ID, STAFF_NAME)
TASK(PROJECT_ID, STAFF_ID, HOURS)
There is a many to many relationship between PROJECT and STAFF. The intersection table is TASK.
Issue
I would like to create a tabular form for the TASK table. I would like to be able to click on a button (Add Row) to add a row to the existing tabular form. The row will have a LOV for the PROJECT_ID (showing PROJECT_NAME) and one for the STAFF_ID (showing STAFF_NAME) and a free form text field for the hours.
I've tried a bunch of different ways but am unable to acheive this functionality. I must be doing something wrong. This sort of thing is trivial.
Any guidance/suggestions are greatly appreciated.
Thanks

Adding a new surrogate key column to an existing table is not that big a deal.
alter table t add (pk int primary key);
create a before-insert row-level trigger to populate the key;Other than that, you are out of luck w.r.t the wizards. Yes, you can define a 2nd PK column in the wizard, but then the 2 PK columns becomes read-only (but you want to update them).
You can write your own tabular form using htmldb_item APIs and your own after submit processes to process the updates. See the manual Tabular Form Howto in the documentation.
Thanks

Pricing For Text Item in Sales Order

Hi ,
How to give price for text item in sales order.
With regards.
Afzal

Hi Afzal,
consider to create a single service material as a generic one, type DIEN, with basic data and sales org views, with item category group LEIS (it will determine item category TAX in sales order). Material description could be "Don't forget to change me!" so in sales order user remembers to changes the description according to the especific sales order requirements.
Regards,
JM

Ontext menu at form level text items

Hi, I want to know how we can create a context menu at form level text items.
like i want a context menu at column level for following options copy, hide, show, set filter, find, sort in ascending and descending order.
I will be highly obliged.

Hello,
Create an internal menu (popup menu node in your form module), then attach its name to the corresponding item (fonctionnal -> popup menu)
Francois

Reservations for Text Items in production order

Hi,
While creating production orders which has text item as one of the component, Reservation is getting created for the text item.
Can any body tell the config behind this so that reservations are not created for text items.
Thanks in advance.
Regards,
Aheesh

Dear Mangalraj,
Thanks for your wishes, hope the mutual learning continues.
Good luck.
Regards,
Vivek

Text ID for text object BUT000 does not exist

Hi Experts.
I am doing data migration using LSMW with IDoc. I have this error message "Text ID for text object BUT000 does not exist" when processing the IDoc.
Can anyone tell me what is this error about and how could i fix it. A step by step guide would be nice. Really need advice urgently.
I'll definitely rewards points.
Regards,
Julianna

for this u need to maintain the text object and its related text id using the TC: SM31 in rel. view of ur tcode( like MM01, Va01 etc).
first get the view names(1 for text object and 2 for text id) from fun. people.
then go to sm31 with 1 view, create BUT000 .
then go to sm31 with 2 view, maintain text id for the text object:BUT000.

Transfer Order auto create for Posting Change not working

Hello Gurus -
When we release an inspection lot from "Q" status, it creates a posting change notice, and we have it configured to create a TO in the background to the same bin, and auto confirm. The desired and intended result is to take something from "Q" status to unrestricted status, while keeping it in the same bin - and avoiding the user having to deal with the transfer orders. Essentially it is seamless and all in the background, the user just sees that he has changed something from quality status to unrestricted.
It works fine when the entire quantity is selected for the usage decision, but when a partial usage decision is made, the transfer order does not create - and requires processing in LU04 for the posting change.
Why would this work for an entire qty, but not work for a partial qty - and simply require someone to go in to LU04 and hit "create transfer order" - with no additional information?
Any help would be most appreciated. Does it have something to do with a setting of quants?

Hi,
In case of a usage decision for a partial quantity, it is not possible to create the Transfer Order for the generated posting change notice automatically. This is only possible when the full quantity is released. The same happens if you release a partial quantity and post the rest to blocked stock or scrap. The reason is, there needs to be a user decision, which part of the quantity has to be posted, this is necessary for example when the quantity is distributed in the warehouse over many storage bins. But even if the full quantity is on one storage bin, there is no automatic TO creation. You can see this also in the online
processing (LT05), in case of partial quantities you have to enter the selected quantity in the quant list, for a full posting this is not necessary.
Hope this helps,
Sinéad Curran

TS1424 I have been billed for an item I did not want and did not intentionally purchase, How can I get this reversed.

I have been billed for an item I did not want and did not intentionally purchase.
How can I get this reversed?

All purchases are considered final, but you can try contacting iTunes support and see if they will give you a refund or credit : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

HT1725 I need a refund for a Item I did not receive $1.49 credit to my account.

I need a refund for a item, I did not receive $1.49 need to be credit back to my account.

These are user-to-user forums, you can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Text messages ringtones are not working in the Storm Two

Device: Storm Two running OS version 5.0.0.713 on the Verizon Wireless network.
Recently, I upgraded from a Storm One to a Storm Two because of a multitude of issues with the Storm One; not enough memory, constant lock-ups; dropped calls, etc. On the Storm One I had customer ringtones for contacts; so when a contact calls me the phone will sound a specific ringtone for that contact; the same for text messages from that contact. Now that I have the Storm Two the text message tones for the contacts are not working. In fact, even when I select a ringtone for text messages for a contact the phone will ring the generic ringtone that comes with the phone. If I go into the sound profile and change the generic ringtone to one of my own and the contact sends me a text/sms message the phone will ring the ringtone that I selected in the profile that is being used at the time. This is not the way it worked on the Storm One. On the Storm One; if I have a specific ringtone for the contact and that contact sends me a text message it will sound the text messages tone for that contact. These ringtones have worked for previous devices including my Treo and Palm devices. The ringtone files worked well in the previous Storm One.
So to make a long story short; I want to know why my text message ringtones are not working as designed/setup-up. If a contact calls me the phone will sound the ringtone for that contact; but if that same contact text me it will not ring the ringtone for the contact. This is annoying and I am at my wits end trying to find out why this is not working.
Vernon

Hi Jain....
Field separator is for separating the fields.That means it will effect every field in the node.
But end separator is not like that.It will apply at the end ofall fields of a node.It will effect node not a field.
according to ur scenario if u use data.endseparator 'nl',output will come like this
2008/0701$101
2008/0701$102
2008/0701$103
2008/0702$105
if u want new line for every field try to insert a separate node for second field.That means
MT_DATATYPE:
Data -
1:UnBounded
. .OrderDate----
1:1
<Data2> 1:1
. ....OrderNo -
1:1
now give data.endseparator 'nl'
data2.endseparator 'nl'
if possible try like this....
Sreedhar Goud L

Drag n Drop selected Text from Safari, chrome not working on indesign CC

In CS6 If we drag drop any selected text from any app on layout it work but in indesign cc it is working only with some app like TextEdit, notes etc. I knew that very few people have such use case but same is also not working from one of my cocoa app.
while debugging if i drop content from TextEdit and Notes app on some sample app I found that TextEdit & Notes App registered for this Extra Pasteboard type "com.adobe.indesign-import-ustl" and "com.adobe.indesign-import-styl" where as chrome and safari are not. similarly my app is registered only for "NSPasteboardTypeString" type. Is this is the limitation or bug of indesign?

Similar bug(#3710667) was exist in CC before 9.2.2 update as you can see in release notes of 9.2.2(CC last update) here. before fix simple selected text drag & drop did not work from any application except TextEdit .I have also spent hours before this update to find out bug I used ClipBoardViewer sample App to find out current Drop flavour and its content it may help you and before fix I find some workAround first is add flavour in your drop which Indesign understand even if you are not adding any data for that flavour so that you start receiving couldAcceptType() and under this call parse your actual data from PasteBoard and remove all data from pasteBoard so that another next helper will not consume it. as you mention even after adding text flavour your couldAcceptType() not hit so may be this WorkAround not work for you but it worked for me.
second is just a finding i.e before doing drag and drop on indesign create one new document (from Indesign UI not programmatically ) save it on disk close it and reopen it after it every drag & drop will start working work .

I have acrobat pro on my lap top and recently installed acrobat pro on my Mac Mini, but the text recognition function is not working, does anyone have any advice on how to remedy this problem?

I have acrobat pro on my lap top and recently installed acrobat pro on my Mac Mini, but the text recognition function is not working, does anyone have any advice on how to remedy this problem?

On my laptop when I open up a pdf file and do a search for a particular
text phrase it prompts me to run a character analysis. Whereas on my mac
mini, when I try to engage the same process it just says it couldn't find
the phrase and doesn't even try and run a character analysis. I tried
clicking on the tool bar and the recognize text tab but nothing there seems
to do anything.
In trying to figure out the issue on my own I noticed one thing. I run a
small law firm in St. Louis and I scan in all my files to which are
subsequently emailed to my outlook account where I will save them as pdf's
to their respective folders. On my laptop when I open up an email from my
scanner I see the image of a acrobat document next to the attachment
paperclip symbol. However, when I open up the same email on my mac mini I
notice instead of an acrobat file image it shows a Preview file image (the
program used to open up pdf's before I installed acrobat).
Hope this helps!
Sincerely,
Jonathan McAllister

Tabular form for text item -save changes not working

Similar Messages

Maybe you are looking for