Talent Management - "Share wiith Appraisee" button validations

Hi,
In the Main Appraiser review page, we can see 3 buttons, "Share with Appraisee", "Update" and "Give Final Rating". Our appraisal process is:
1) Employee gives the ratings first and then transfering to manager for manager ratings
2) Direct Manager logs in, before provide the ratings, manager can transfer the appraisal to appraisee by clciking "Share with Appraisee" button.
Can we do any validation in this button by personalization or anyway to force the manager to give the ratings before transfer the appraisal to appraisee?
Thanks in advance.

If the employee initiates the appraisal, they can give a self assessment of their ratings for competencies and objectives, and they can complete a questionnaire. But, they cannot give themselves any FINAL RATING.
When they transfer the appraisal to the manager, the manager can then give his version of the ratings and complete their version of the questionnaire. At this point, they can either share these details with the employee, or they can go to the final ratings page.
You could configure the appraisal template settings to allow the employee to give feedback on overall rating Then remove (via personalisation or by other settings in the sharing options of the appraisal template) the share button from the first page. This amends the flow of the process so it goes:
EMP (enter self assessment and ratings) - MGR (enter managers view of ratings) - MGR (Final Rating) - EMP (to see, but not amend rating) - Closed.
Hope that helps, but this can be quite a complicated process to control.
Regards
Tim

Similar Messages

Error while creating the Connector in PRD - Trex in Talent Management

Dear Luke,
Greetings.
We are in ECC 6, Eph4.
While setting up the TREX in Production we are encountring an error as below. But we dont have any issue in Development and Quality system. TREX related to Talent Management is working fine.
Would be great if you share your inputs.
Kind regards
Sathya

Dear Luke,
Thank you for response. We have posted an OSS message. SAP is suspecting this to a support pack level kind of issue. So we are waiting for a solution from SAP.
Appreciate your support.
Kind regards
Sathya

Development Plan Configuration details for Talent Management

Hi Gurus,
I need to know the configuration nodes used for Development Plans in Talent management.I created the development form in Talent Assessment -->Define Forms for Talent Assessment. & assigned a scale to it.
Now when I log in with the TMS id in portal & create a development form for one of the employees, I can see certain links & fields like : Add Action (link), when i click on Add action a screen pops up & asks for Action Type & Action Status.
Firstly i need to know where does these values get fetched from.
Secondly when i click on Add Action button, ideally it should give me 2 options :1. Add actions that can be freely defined and 2. Add training,but currently it just opens a window to create a new action.So how to control the same.
Regards
Bharti

Hi,
I know this is a (very) old post but my answer might help someone anyway.
1. Actually, the dropw-down lists are filled from the table T77TMC_SCA_MAP, status is mapped with scale 8 and type is mapped is scale 9.
Customizing of this table can be reached trough transaction S_EH4_55000247.
2. The option is only shown when LSO integration is active.
Hope it helps.
Best regards,
Guillaume

Talent Management

Hello,
Scenario: EHP4 - Talent Management --> Performance management integrated with Compensation Mgmt
is it posible to have the budget check to be made, when the manager is entering the final rating for an employee in the appraisal screen.
Is that a standard functionality? can you please share some links
Thanks
Sera

Suggestions please..

Add custom embedded region or link in talent management

We are doing a proof of concept implementation of Oracle Talent
Management. As part of this implementation we have been requested to
add Salary change functionality to the employee performance appraisal
process. Usually this process is only used to evaluate
competencies, objectives and overall performance and does not include
salary information.
Our Thoughts:
Oracle provides out of the box the Salary change process on its own.
There is an entry page for the values, PRatePG, and then a review
page, ReviewPG. We would like to take the majority of the
functionality on those 2 pages and add that functionality to the 2
similar pages used for performance review. On the performance review
side the equivalent pages are the entry page MAFinalRatingsPG and the
review page,MAFinalRatingsRevPG.
We are looking for the best way to move forward regardless to
incorporate the functionality of entering and reviewing the salary
into the performance appraisal set of pages which don't currently
contain the data or functionality at all for salary.
We have considered also going a complete custom route, however the
functionality on the Salary screens are intricate and have several
PPR elements. Additionally, there was the thought to somehow add the
Salary page functionality as an additional page on the page flow as a
customization. This might still be an option as well. We are open
to any ideas.
Please let us know if any of you have done anything similar and would
like to share with us.
We would like to know what is the best option to meet the requirement
1)Create a link to seeded salary page
2)Embed the seeded salary region in Appraisal form
3)Create custom salary region and embed that into Appraisal form
Thanks

We are doing a proof of concept implementation of Oracle Talent
Management. As part of this implementation we have been requested to
add Salary change functionality to the employee performance appraisal
process. Usually this process is only used to evaluate
competencies, objectives and overall performance and does not include
salary information.
Our Thoughts:
Oracle provides out of the box the Salary change process on its own.
There is an entry page for the values, PRatePG, and then a review
page, ReviewPG. We would like to take the majority of the
functionality on those 2 pages and add that functionality to the 2
similar pages used for performance review. On the performance review
side the equivalent pages are the entry page MAFinalRatingsPG and the
review page,MAFinalRatingsRevPG.
We are looking for the best way to move forward regardless to
incorporate the functionality of entering and reviewing the salary
into the performance appraisal set of pages which don't currently
contain the data or functionality at all for salary.
We have considered also going a complete custom route, however the
functionality on the Salary screens are intricate and have several
PPR elements. Additionally, there was the thought to somehow add the
Salary page functionality as an additional page on the page flow as a
customization. This might still be an option as well. We are open
to any ideas.
Please let us know if any of you have done anything similar and would
like to share with us.
We would like to know what is the best option to meet the requirement
1)Create a link to seeded salary page
2)Embed the seeded salary region in Appraisal form
3)Create custom salary region and embed that into Appraisal form
Thanks

Development plan by Employee - Talent Management

Dear Luke,
Greetings.
From one of your blog understand very clearly that Development plans are only accessible by TMS and Manager. And not by Employee. But this could be well accepted when the it comes to larger organization.
In the event of small or mid size kind of organization one of the main requirement is that they want the Employee to view the development plan set for them. Because these Development plans are not only for the purpose of Succession planning rather to address the gap in Position vs Person related competency.
Would be extremely helpful if can share a solution pertaining to getting the Development Plan in Talent Management viewable by Employees.
Would appreciate your inputs.
Kind regards
Sathya

Hi Sathya,
By default this is not possible, but I know that Chris McNarney has done this before. It is quite complex to code from what I remember because it involves generating the MEM_ID.
Best regards,
Luke

Talent Management - PDF Docs IMG Config Step

Hello,
We are having some issues with the configuration step u201CAssign Application Forms to Elements of PDF-Based Documentsu201D.
Here are the steps we have taken so far:
1) Copied the Application Forms from Client 000 (HRTMC_RM_COVER, HRTMC_RM_TALENT_AGENDA_TOPIC, HRTMC_TALENT_PROFILE, HRTMC_TALENT_SHORT_PROFILE) to our Sandbox & Development Clients
2) Set u2018Use Complex Bundlingu2019 to u201Ctrueu201D via FPCONNECT (SM31)
3) Attempted to add the different u201CParameter valuesu201D HRTMC values (specified above) to the IMG config step assign application forms to elements of pdf-based docs
When trying to complete #3, we receive an error u2018enter a valid valueu2019. I checked both the Application Forms and the Forms Class and these objects exist, and are active. We even re-transported the objects to see if that was the problem, but it did not work.
Any thoughts to why we are receiving this message?

Can anyone tell me how doea the portal talent management configuration work???

Talent Management- Calibration grid error in Talent Review Meeting

Hi all,
I'm getting errors when running the calibration grid in Talent Review Meeting:
No entry for BAdI field RISK in table T77TMCAESFIELD
No entry for BAdI field CHANGE_NEED in table T77TMCAESFIELD
No entry for BAdI field RISK in table T77TMCAESFIELD
No entry for BAdI field IMPACT_LOSS in table T77TMCAESFIELD
Please guide me on what to do to resolve this.
Thanks.

Hi Eric,
In order to fix a bug with the Calibration Grid, the following values need to be entered into table T77TMCAESFIELD. This can be done via IMG > Talent Management and Talent Development > Basic Settings > Adjusting the User Interfaces > Configurations for Data Retrieval > Extend Fields Selection > Adjust Data Retrieval for Appraisals, Evaluations, and Surveys
RISK
IMPACT_LOSS
CHANGE_NEED
The values can be dummy values (i.e. just the name and the validity dates) or, if using Risk, it can be a VB object from the appropriate Talent Assessment form(s).
Best regards,
Luke

Talent Management - Talent Review Meeting - Nominations under Participants

Hi experts,
In talent group, I have nominated some employees under a manager. Then during the creation of the Talent Review Meeting, when I add the manager as the participant, I do not see the nominees under the manager which I nominated earlier.
Did I miss any steps/configuration to this so that those nominated will appear under their respective manager?
Thanks in advance.

Hi Eric,
In order to fix a bug with the Calibration Grid, the following values need to be entered into table T77TMCAESFIELD. This can be done via IMG > Talent Management and Talent Development > Basic Settings > Adjusting the User Interfaces > Configurations for Data Retrieval > Extend Fields Selection > Adjust Data Retrieval for Appraisals, Evaluations, and Surveys
RISK
IMPACT_LOSS
CHANGE_NEED
The values can be dummy values (i.e. just the name and the validity dates) or, if using Risk, it can be a VB object from the appropriate Talent Assessment form(s).
Best regards,
Luke

Issue in creating dev plan in talent management specialist role

Hi ,
I am facing issue in creating development plan through talent management specialist role . Actually in one system I have 2 location one is india & another one is USA . its working for india but when I search india employee its show no employee found . can you please guide me
Tarun

Hi Luke ,
According to one of your article , I run HRALXSYNC in r/3 , in that all indian employee are green but USA employee in RED . I found following error , can you please guide me that what is mean by that ?
The error occurred in program CL_HRRCF_INFOTYPE=============CM003 line 117
Qualification 90007487 does not exist
The incorrect HR object has the key 01NA90011026
The incorrect infotype record is 40601NA900110265105 1 1900010199991231
The error occurred in program CL_HRRCF_QUALIFICATION========CM001 line 69
Serious error; see log
The error occurred in program CL_HRRCF_CANDIDATE_INFOTYPE_BLCM00B line 99
Serious error; see log
The error occurred in program CL_HRRCF_INFOTYPE=============CM003 line 117
Qualification 90007487 does not exist
The incorrect HR object has the key 01NA90011026
The incorrect infotype record is 40601NA900110265105 1 1900010199991231
The error occurred in program CL_HRRCF_QUALIFICATION========CM001 line 69
Serious error; see log
The error occurred in program CL_HRRCF_CANDIDATE_INFOTYPE_BLCM00B line 99
Thanks
Tarun

Issue in EHP5 Talent Management (Team Goals) Cascade goals functionality

Hi Friends,
Issue in EHP5 Talent Management (Team Goals) Cascade goals functionality.
Under Team Object While try to cascade goals, it pop-Up Warning Msg u201CChoose Save to save the goal in the employee document. The goal can no longer be deleted, only set to obsoleteu201D.
If we click Ok to proceed further, I am getting error stating u201CYou have made no selection" and " No appraisal template defined ".
Same functionality is working fine in u201CPerformance Management (Predefined)u201D
With Regards
Seranjeeve Kumar

Please set the parameter PROCESS "PMP" in the iview configuration.
ie
ROLE_ID=PA&PROCESS=PMP in application parameters
content provided by SAP ->
specialist ->
Talent management Specialist ->
iViews ->
COmpany goals etc
and you can confirm using this
CL_HAP_CASCADE_GOALS > meth0d GET_VALID_APPRAISAL_TEMPLATES
The parameter mentioned in the note 1457057, the one that you enter in
transaction SE80 is the default value. However, if you call application
with parameter PROCESS=PMP then the PMP process for cascading goals will
be used.
check note 1523527

Development Plans functionality in Talent Management

Hello,
We are planning to use the Development Plans functionality in Talent Management.
But the Development Plan is not opening from MSS. (MSS -> Talent management -> Assessment -> Development Plan).
I had created the Business partner object for all my test PERNRs and I had created a Development Plan Template (via IMG step in Talent management). I had activated the Business Functions and Services.
When I open the Development plan in MSS, it is showing the names of employees (i.e. the reports of the manager). But when I click on an employee, it's not opening any development plan. Nothing is happening.
Please help me,
Thanks
Raghu

Hi Bharti,
You must first delete the template names from the customizing tables where it is stored (under Talent Assessment node of Talent Management and Talent Development). Then you delete it under PHAP_CATALOG. Unfortunately you have created an databse inconsistency and you might need to see if Basis can delete the values from the table.
Best regards,
Luke

How to fix problem of bypassing the submit button validation by pressing the space bar in the required fields. this occurrs in the internet explorer and chrome browser, but in foxfire.

How to fix problem of bypassing the submit button validation by pressing the space bar in the required fields. This occurs in the internet explorer and chrome browse but not in foxfire

How to fix problem of bypassing the submit button validation by pressing the space bar in the required fields. This occurs in the internet explorer and chrome browse but not in foxfire

Is TREX mandatory for Talent Management?

Dear Experts,
Is TREX a mandatory component for Talent Management? It's because I am having issue when I click "Search" in Talent Management Specialist Launchpad, telling me "Error occurred during the search; contact your system administrator".
And it seems to me that TREX supports only LINUX and MaxDB, which is totally out of our company's landscape.
Thanks,
Steven

Hi Steven,
TREX is the search engine itself. That means Talent management is using enterprise search and enterprise search uses TREX to perform searches and store data.
Enterprise Search is part of SAP Netweaver ABAP ( also called embedded search ). Enterprise search is responsible to index data from HR to TREX and is responsible to redirect search requests from Talent management to TREX and put back the results back to the UI. It also provides tools to maintain and administer the data models.
So Enterprise Search is available on your Netweaver ABAP system. But ES uses TREX. That means if you want to get ES up and running you need TREX. (normaly installed on a different box and connexted by RFC to the Netweaver System)
hope that helps.
Martin Hastik

Looks like small data discrepancy in hr_api_transactions.transaction_document for Talent Management

Hi,
I have some problem with the XML data in transaction document for Talent Management
Unable to perform transaction on the record.
Cause: The record has deleted by another user
When checked manually from back end, there objectives (IDs) that are there in XML type, aren't there in per_objectives table. The error seems right.
My task now is to find how many cases(objectives) are there like this. Logic is, look for objectives (that are marked as Update/Delete) in XML and find the ID existing in per_objectives or not. I could make-up the SQL for listing all objectives as a table result as below:
select
   extractvalue(VALUE(xx_row), '/ObjectiveEORow/Name') AS objective_name,
   extractvalue(VALUE(xx_row), '/ObjectiveEORow/ObjectiveId') oid
from hr_api_transactions txn,
       TABLE(xmlsequence(extract(xmlparse(document txn.transaction_document wellformed),'/Transaction/TransCache/AM/TXN/EO/ObjectiveEORow'))) xx_row
where extractvalue(xmlparse(document transaction_document wellformed),'/Transaction/TransCtx/TransactionRefId') = '26308'
and txn.transaction_id = 1946469;
Problem now is, to distinguish only the PS="3" (Delete) and PS="2"(Update) objectives. This table doesn;t show the PS attribute of the "ObjectiveEORow" node in XML.
               <ObjectiveEORow PS="3">
                  <ObjectiveId>1813772</ObjectiveId>
               </ObjectiveEORow>
Please help me in making the SQL show the XML attribute "PS" value for node "ObjectiveEORow".
regards,
Raj.

I could get the solution. Thanks everyone !
select 'E'||ppf.employee_number employee_number,ppf.full_name,txn.transaction_document,txn.transaction_id, i.*
from per_all_people_f         ppf,
      per_personal_scorecards psc,
      hr_api_transactions      txn,
         xmltable('/Transaction/TransCache/AM/TXN/EO/ObjectiveEORow'
            passing xmltype(transaction_document)
            columns
             PS varchar2(800) path '@PS',
             oid number      path 'ObjectiveId'
            ) i
    where txn.transaction_ref_table = 'PER_PERSONAL_SCORECARDS'
    and psc.scorecard_id = txn.transaction_ref_id
    and ppf.person_id = psc.person_id
    and trunc(sysdate) between ppf.effective_start_date and ppf.effective_end_date
    --and psc.plan_id = 146
    and i.ps in ('2','3')
    and ppf.employee_number in ('4018','5072','6389')
    and not exists (
       select 1
       from per_objectives o
       where o.objective_id = i.oid)
regards,
Rajkiran.

Talent Management - "Share wiith Appraisee" button validations

Similar Messages

Maybe you are looking for