Task scheduler is showing success but not running job

Hello, I have a relatively simple .net application that I realized when ran through the Task Scheduler of a Windows 2008 R2 server it shows in the status that i completed successfully but apparently did not run at all from looking at the log file. 
When I just manually execute this program it runs perfectly fine.  I am using myself as the user to run this task and have full permissions. 
I also tried a test batch file that just echos some text into a text file.  Same issue.... shows that it runs ok in task scheduler but doesnt do anything while running it manually works fine.
Any ideas of what could be causing this?  thanks

Hi Nehemiah,
I ran the test batch file as below and work without issue:
@echo This is a test> d:\test.txt
And this is my setting:
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • Application built in LabVIEW 2011 installed successfully but not running on windows 8.

    Hello all,
          We have been using labview 2011 to develop datalogging applications. We have built the installer package for one of the applications by choosing the option 'windows XP or later' in 'Advanced' category. The installed application works fine in Windows 7 and earlier versions. But it doesn't seem to work in windows 8. When we try to run the application, the application doesn't load itself or show up but runs in the background consuming 75% of memory (as seen in the task manager).
         Then we tried rebuilding the package by selecting 'windows 7 or later' option from advanced category. The problem persists. Running the application in compatibility mode of windows 8 did not help.
          Please let us know how to fix this problem.
    Kudos are always welcome if you got solution to some extent.
    I need my difficulties because they are necessary to enjoy my success.
    --Ranjeet

    Ranjeet_Singh wrote:
    I thinks it was AMD only. does it make any difference.
    What is "AMD only"? Do you have the exact processor model?
    LabVIEW 2011 has problems with some AMD processors, and some of the issues have been fixed in 2011 SP1 f1. I don't know if built application had similar problems.
    LabVIEW Champion . Do more with less code and in less time .

  • DAC Task are queued but not running

    Hi Everybody,
    Currently we are running the ETL for only Financials and there are 394 tasks in total out of which 285 have been completed successfully. At times some of the tasks would just get stuck on particular action. For e.g The analyze task after dimension population would remain in the queued status and would never switch to run mode. So we had to abort the ETL and restart it. This action resulted in successful completion of the previously queued task. Now for past two days the ETL is once again stuck (queued but not running).
    For e.g The following task is showing status of running
    51     SIL_InventoryProductDimension_SCDUpdate     Running     2009-03-02 21:09:59.0                    DataWarehouse     DataWarehouse     SILOS          Update Slowly Changing Dimension     Informatica     0     0     -2     CUST R11 5 10
    But if I right click on the details
    I get this
    1     SIL_InventoryProductDimension_SCDUpdate_Full     Running     2009-03-02 17:40:41.0     2009-03-02 21:09:09.0     3 hour(s), 28 min(s), 28 sec(s)     Verifying if workflow still running on Informatica Server 'Oracle_BI_DW_Server'.
    If still running will attach to the workflow.     DataWarehouse     Informatica     0          -2     0
    And the remaining detail tasks for this are in queued status.
    What could be the reason?
    Does it need the Infomartica workflow manager open? It is open currently open but must have been accidently closed in between.
    Informatica services have always been running.
    Thank you very much
    Nilesh
    [excel dashboard|http://www.exceldashboard.org]
    dashboard Software
    [Access Dashboard|http://www.accessdashboards.com]
    [Dashboard Reporting|http://www.reportingdashboard.com]
    Edited by: njethwa on Jan 6, 2010 5:39 PM

    Hi
    This Sometime happens with DAC.We faced the same issue and had an SR open with Siebel for almost 2 weeks,they Couldnt help us out.
    Restart your DAC Server and Do a Dryrun and then run your full ETL .
    The Analyze task would not hang anymore.
    I dot have any logical reason why this happens,but i am guessing it has to do with some java heap memory.So restarting the Server would free up the memory.(i am guessing but not sure).
    But it Works.
    Try it
    Let me know if this helps
    Thanks
    H

  • How to programmatically load and show the front panel of a vi but NOT run it?

    Is there a way to load and show the front panel of a vi but NOT run it?  I am starting with the AsynchronousCallAndForget.vi from the example finder and inserted an invoke node with the FP Open method call prior to the Start Asynchronous Call node. The vi I am loading has the "Run when opened" unchecked and the menu bar IS visible so I can manually click the run arrow. Thanks!
    Solved!
    Go to Solution.

    Why are you using the Async call? If you simply open the VI reference, then call the FP.Open method this works fine. You can then call the VI run method with Wait Until Done set to false if you wish to run it Asynchronously, this is how we did it in ye olde days before we had this new fangled "Start Asynchronous Call" stuff. 
    Charles Chickering
    Architecture is art with rules.
    ...and the rules are more like guidelines

  • When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6. Can anyone help me?

    When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6. Can anyone help me?

    Don't panic. OS X 10.5.8 is the most popular PowerPC OS out there. People run it everyday without security breaches, including myself. It isn't Windows!
    If you're really that worried, I highly recommend Sophos Anti-Virus for Mac Home Edition. Supports PowerPC & Intel and Mac OS X 10.4-10.7.
    http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-ed ition/system-requirements.aspx
    Direct download: http://downloads.sophos.com/home-edition/savosx_73_he.dmg

  • I was running Foxfire 3.6.9 and wanted to use FTP Program add-on and it did not appear to load but appeared but then would be installed but not run or appear under tools. So I deleted Foxfire 3.6.9 and down loaded to 3.5.9 so it could get FTP and it is do

    I was running Foxfire 3.6.9 and wanted to use FTP Program add-on and it did not appear to load but appeared but then would be installed but not run or appear under tools. So I deleted Foxfire 3.6.9 and down loaded to 3.5.9 so it could get FTP and it is doing the same could not install. Even after I registered my copy. The last time I used this program it showed up under tools and worked great. any suggestions on whats going on and how I can get around this?.by ralphd3g

    Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry.
    See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    If you see disabled extensions that are not compatible on the next start in "Tools > Add-ons > Extensions" then click the "Find Updates" button to do a compatibility check.

  • Failover to redundant box shows Redundancy Protocol: Not Running on CSS

    After failover to redundant (backup) BOX, the backup BOX becomes Master but output of “sh redundancy” shows Redundancy Protocol: Not Running and shows intermittent packet drops.

    Here is the URL for the configuration for the Configuring VIP and Virtual IP Interface Redundancy follow the configuration guide which may help you http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/css11500series/v7.10/configuration/advanced/guide/VIPRedun.html

  • Finder shows some but not all files in a folder

    In some circumstances, Finder only shows some (but not all) of the files in a folder. Why?
    I notice this with Excel autosave files in the Office 2011 Autorecovery folder (Macintosh HD ▸ Users ▸ Conor ▸ Library ▸ Application Support ▸ Microsoft ▸ Office ▸ Office 2011 AutoRecovery). In my case, Finder shows 34 files but "ls" in a Terminal window reports 40 files. The missing files do not start with a period (.) and have the same permissions as other files that show in Finder (-rw-r--r--@ 1 <myname>  staff). Here's the last four lines of "ls -al" - the first two appear in Finder, but not the last two:
    -rw-r--r--@  1 myname  staff    55296  8 Oct  2013 Word Work File D_1239425731.tmp
    -rw-r--r--@  1 myname  staff    55296  8 Oct  2013 Word Work File D_1240072173.tmp
    -rw-r--r--@  1 myname  staff    52796 13 Feb 11:08 safe1.xlk
    -rw-r--r--@  1 myname  staff    95320 12 Mar 16:06 safe2.xlk
    I have tried copying files from this folder to another folder, and/or changing their names. They still do not appear in Finder, nor are they visible in the File Open dialog of applications, even when the dialog is listing other files in that directory - but if I manually type the name into the File Open dialog, the app manages to find and open the file.
    If I Spotlight-search for the file name, or search in Finder, without specifying that specific directory ("This Mac"), the file is not found, but if I direct the Finder search at that particular directory, then the search returns the relevant files.
    So: why does Finder hide certain files when showing a folder, even though it can find and show those files if you specifically ask for them?
    Now using OSX 10.10 (Yosemite), but I'm pretty sure I noticed this on OSX 10.8 as well.

    So simple - thanks. I'd not been aware of the hidden flag, and now I've found the -O option on ls to display it.
    Follow-on question: I now see that you can change the system-wide defaults to display hidden files with this...
         defaults write com.apple.finder AppleShowAllFiles -boolean true ; killall Finder
    ...but is there a way to specify this on a per folder basis? I'm happy enough to hide hidden files in general, but it would be nice if I could set an attribute/flag/whatever on the Office AutoRecovery directory that told Finder "in this folder, always display hidden files". Can I do this?

  • Constant Error; Adobe Flash Player 11.4 r402 has stopped working. But NOT running Trusteer Rapport.

    I am experiancing this unbelieveably annoying and constant Flash error;  Adobe Flash Player 11.4 r402 has stopped working.
    But NOT running Trusteer Rapport, I never have, and it's not even installed on my computer.  So what's causing this?

    There were a couple AntiVirus/AntiMalware products that keep coming up, but I haven't validated that in the lab and don't want to call anyone out publicly without reporting the issue to them first.

If you could tell me what antivirus/antimalware products and versions you have installed, that would be helpful.
    So, third party stuff aside, I'd like to know more about the crashes your seeing:
    1.) Please provide links to the Firefox crash reports.  If you have multiples, the first few would be great.
         In Firefox, type about:crashes in the address bar
         If the link starts with "bp...", it's already been submitted -- just right-click on it and copy the link, and paste it into the reply here.
         If not, click it to submit it, and copy the subsequent link.
    2.) In firefox, type about:support
         Just copy and paste the output into the reply.
    3.) In Firefox, type about:plugins
         Please copy and paste the output into the reply
    4.) Please provide the output of the DirectX Diagnostic Utility
         Click Start > type "dxdiag" [enter]
         Click Save All Information
         Copy the output of the file into the reply, or use Adobe SendNow/DropBox/PasteBin to share the file.
    5.) If you can provide an exact URL and step-by-step instructions on repeating the crash (if it's consistent), that would be really helpful.  My goal is to build out a configuration that matches yours as closely as possible, reproduce the problem and then debug it.
    If you're not comfortable sharing that diagnostic information publicly, send me a private message.  Just click my name and use the options on the right.
    Thanks!

  • Compile correct but not run java programs

    I have problem. Java program copile correctly but not run. I can't understand this one.
    **this is the error**
    Exception in thread "main" java.lang.NoClassDefFoundError: suminda
    Caused by: java.lang.ClassNotFoundException: suminda
    at java.net.URLClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    Could not find the main class: suminda. Program will exit.

    The error is telling you that the jvm could not find a class named suminda. Are you aware that class names are case sensitive? Suminda is not the same as suminda for example.
    This error usually happens when you haven't specified the classpath correctly. A simple thing to try isjava -cp  .  sumindaHere's some links that may help.
    [http://www.kevinboone.com/classpath.html]
    [http://java.sun.com/javase/6/docs/technotes/tools/findingclasses.html]

  • TS1717 What do I have to do to keep the iTUNES program on my computer BUT NOT RUNNING on Start UP? It requires too much CPU usage on my old computer.

    What do I have to do to keep the iTUNES loaded as a program on my computer BUT NOT RUNNING on Start UP? Just opening when I want to use it.
    It requires too much CPU usage on my old computer.

    You can check you Adobe account online to see if the serial number is registered under your account.  If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • HT1923 Before I un-install itunes has anyone had a problem getting an ipad mini to show up in itunes as a device when connected to the computer? My old ipad shows up but not the new mini.

    Before I un-install itunes has anyone had a problem getting an ipad mini to show up in itunes as a device when connected to the computer? My old ipad shows up but not the new mini.

    Just wondered if anyone had any other suggestions.

  • Internet showing up but not working iTouch 4th Gen

    Help my Internet connection Is showing up but not working. it happens when the Internet goes off the router then resets it self which it for everything except my iPod :( Please help we've reset it again :( but no luck

    Please help does anyone know what to do?

  • Success but not Posted Process Scheduler

    Hi all,
    I just installed HCM 9.1 PT8.52, Demo DB, Oracle 11g Database and Windows server 2008.
    I installed and configured the process scheduler (followed the steps) and created a windows service for it, that is 'Automatically started'.
    When trying to run a process scheduler, I'm getting a run status 'Success' but the 'Distribution Status' is 'Not Posted'.
    I suppose it is not finding the location or something?
    What should I check?
    Thanks.
    Bechara

    Thank you!
    The ReportDistAdmin role was missing so I added it.
    I shut down process scheduler and re-run it, but I'm still getting 'Not Posted'
    Is there any additional step to do before trying the reports?
    Update
    And the password was missing in the default local node, I added it and it worked!
    Thanks you Hakan!
    Edited by: Bechara IS on Nov 8, 2012 3:39 AM

  • Processed successfully but not showing in the Payload

    Hi guys,
    My scenario is proxy to file.
    when I execute this report pragram in the R/3, it was successful.
    In the XI, generally we have three folders like SOAP body  and SOAP  HEADER and Pay loads in SXMB_MONI, display, but we not getting pay loads foders even thogh it showing successful flag.
    can any body help me it very ergent.
    points will be reward
    regards
    sreeni

    By standard, for inbound (outgoing) async calls, it won't show the payload tab in last item of the pipeline (Response tab). Check the one before it (the "Receiver Grouping" tab), you will be able to check the payload there. However, it will show the payload at receiver determination runtime. If you want to check it after mapping (which happens at interface determination runtime), you'll need to check it in Adapter Engine message monitoring.
    For outbound (incoming) async calls, you will be able to see the post-mapping payload in the Response pipeline tab. If you want to check the payload prior to the mapping, go either to the "Inbound Message" or the "Receiver Grouping" tabs in the pipeline.
    As I've said, that is by standard. There are ways of showing the adapter pipeline in SXMB_MONI too, but that is another issue.
    Regards,
    Henrique.

Maybe you are looking for