Task sequence failed with error code 0x80070002

I am facing issue in OS deployment my machine PXE boot successfully but on the step of apply operating I got an error "task sequence failed with error code 0x80070002" 
I see lot of thread describes to add Network Access Account I already added but still I receive same error please help
Usama Arif

i had this happen on two of my dp's the other day.  It drove me nuts,  I ended up  removing the DP Role,  removing the server from SCCM
I then deleted all files on the  'D :'  drive
after everything was deleted, I re-added the  Server to SCCM and gave it the DP Role back. 
I then added the DP Back to the  DP Group to receive all packages that was on it before.    then finally once everything was re-uploaded my users were able to pxe boot again

Similar Messages

  • SCOM 2012 SP1 "Task invocation failed with error code -2146232576"

    Hi,
    I`m trying to discover a Linux RHEL 5.9 Server which is in another untrusted domain and from the Discovery wizard I receive the following error:
    Task invocation failed with error code -2146232576. Error message was 0x80131700.
    Any ideas ?
    Greetings.

    Hi,
    @Simon, I restart the SCOM services and I also verify the UAC and it's disabled.
    @Mai Ali, thank you for you reply. I don't have a "&" symbol in my password, but only a "$" ..I hope it's fine.
    If the SCOM discovery doesn't work, I installed the agent manually on the Linux server.
    BTW I also use a "monuser" account configured using this procedure:
    http://social.technet.microsoft.com/wiki/contents/articles/7375.configuring-sudo-elevation-for-unix-and-linux-monitoring-with-system-center-2012-operations-manager.aspx
    I also verify the ports 22 and 5723 and are opened, but I also noticed that if you restart the scxadmin, is listening on HTTPS on port 1207.
    Now..if I try to re-discover the Linux server from SCOM, I receive the following error:
    "The pool managing the instance is not available or the location monitoring object cannot be found"
    Regards.

  • Task sequence failed with error 80070002

    Dears,
    I'm trying deploy OSD, it was working since yesterday but from today I'm facing a problem it's fails with the above error, i got the log file smsts and here it is
    Set command line: "OSDApplyOS.exe" /data:BHN00018,1 /target:0,1
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    Adding logical drive: C: ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    Skipping non-local logical drive: E: ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    Adding logical drive: S: ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    Skipping non-local logical drive: X: ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    The volume S:\ exists and is a local hard drive.
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    The volume S:\ is using a valid file system.
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    Windows target partition is 0-1, driver letter is S:\
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    The machine does not have a local client cache.
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    ResolveSource flags: 0x00000000 ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    SMSTSPersistContent: . The content for package BHN00018 will be persisted
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    DownloadOnDemand flag is true. Attempting to download content locally for Package BHN00018..
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    Package Flags: 0x1000000 ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    GetDirectoryListing() entered ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    Initializing HTTP transport. ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
       Setting URL = http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/BHN00018.
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
       Address=http://PRBAHVSSCCM.ARABBANKING.LOCAL, Scheme=http, Object=/SMS_DP_SMSPKG$/BHN00018, Port=80.
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
       Setting Authenticator. ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    Set authenticator in transport ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    WinHttp credentials set ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    CLibSMSMessageWinHttpTransport::Send: URL: PRBAHVSSCCM.ARABBANKING.LOCAL:80  PROPFIND /SMS_DP_SMSPKG$/BHN00018
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    401 - Authentication failure on request with anonymous access, retrying with context credentials.
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    Using thread token for request ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    401 - Authentication failure on request with context credentials, retrying with supplied credentials.
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    Request was succesful. ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    DAV response string is: 
     <?xml version="1.0" encoding="utf-8" ?><D:multistatus xmlns:D="DAV:"><D:response><D:href>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/sccm?/BHN00018/</D:href><D:propstat><D:status>HTTP/1.1
    200 OK</D:status><D:prop><D:getcontenttype/><D:supportedlock/><D:getetag/><D:creationdate/><D:iscollection>1</D:iscollection><D:resourcetype><D:collection/></D:resourcetype><D:ishidden>0</D:ishidden><D:displayname>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/sccm?/BHN00018/</D:displayname><D:getlastmodified></D:getlastmodified><D:getcontentlanguage/><D:getcontentlength>0</D:getcontentlength></D:prop></D:propstat></D:response><D:response><D:href>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim</D:href><D:propstat><D:status>HTTP/1.1
    200 OK</D:status><D:prop><D:getcontenttype/><D:lockdiscovery/><D:supportedlock/><D:getetag/><D:getcontentlanguage/><D:iscollection>0</D:iscollection><D:creationdate/><D:resourcetype/><D:ishidden>0</D:ishidden><D:displayname>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim</D:displayname><D:getlastmodified>Thu,
    21 Mar 2013 09:21:33 GMT</D:getlastmodified><D:getcontentlength>4984262577</D:getcontentlength></D:prop></D:propstat></D:response></D:multistatus>
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    List of files to be downloaded ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
      File: http://PRBAHVSSCCM.ARABBANKING.LOCAL:80/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    GetDirectoryListing() successfully completed
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    dwStatusCode >= 200 && dwStatusCode <= 299, HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,1304)
    ApplyOperatingSystem 3/27/2013 3:05:23 PM
    1828 (0x0724)
    WinHttpQueryHeaders() returns status code 500 (Internal Server Error)
    ApplyOperatingSystem 3/27/2013 3:05:23 PM
    1828 (0x0724)
    SendWinHttpRequest failed. 801901f4. ApplyOperatingSystem
    3/27/2013 3:05:23 PM 1828 (0x0724)
    SendWinHttpRequest (hSession, hConnect, hRequest, sRequest.c_str(), 0, bUseSSL, ullFileSize, LastGoodCredentialsType), HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,1542)
    ApplyOperatingSystem 3/27/2013 3:05:23 PM
    1828 (0x0724)
    DownloadFile failed. 801901f4. ApplyOperatingSystem
    3/27/2013 3:05:23 PM 1828 (0x0724)
    DownloadFile (hSession, hConnect, sSourceFile.c_str(), sDestinationFile.c_str(), ulTotalSizeRequired, ulDownLoaded, LastGoodCredentialsType, bUseSSL), HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,1648)
    ApplyOperatingSystem 3/27/2013 3:05:23 PM
    1828 (0x0724)
    Error downloading file from http://PRBAHVSSCCM.ARABBANKING.LOCAL:80/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim to C:\_SMSTaskSequence\Packages\BHN00018\Win7-x86-BasicApps.wim
    ApplyOperatingSystem
    3/27/2013 3:05:23 PM 1828 (0x0724)
    DownloadFiles failed. 801901f4. ApplyOperatingSystem
    3/27/2013 3:05:23 PM 1828 (0x0724)
    DownloadFiles (setDirs, setFiles, sDestination.c_str(), bUseSSL), HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,2523)
    ApplyOperatingSystem 3/27/2013 3:05:23 PM
    1828 (0x0724)
    Retrying download... ApplyOperatingSystem
    3/27/2013 3:05:23 PM 1828 (0x0724)
    GetDirectoryListing() entered ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    Initializing HTTP transport. ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
       Setting URL = http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/BHN00018.
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
       Address=http://PRBAHVSSCCM.ARABBANKING.LOCAL, Scheme=http, Object=/SMS_DP_SMSPKG$/BHN00018, Port=80.
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
       Setting Authenticator. ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    Set authenticator in transport ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    WinHttp credentials set ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    CLibSMSMessageWinHttpTransport::Send: URL: PRBAHVSSCCM.ARABBANKING.LOCAL:80  PROPFIND /SMS_DP_SMSPKG$/BHN00018
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    401 - Authentication failure on request with anonymous access, retrying with context credentials.
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    Using thread token for request ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    401 - Authentication failure on request with context credentials, retrying with supplied credentials.
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    Request was succesful. ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    DAV response string is: 
     <?xml version="1.0" encoding="utf-8" ?><D:multistatus xmlns:D="DAV:"><D:response><D:href>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/sccm?/BHN00018/</D:href><D:propstat><D:status>HTTP/1.1
    200 OK</D:status><D:prop><D:getcontenttype/><D:supportedlock/><D:getetag/><D:creationdate/><D:iscollection>1</D:iscollection><D:resourcetype><D:collection/></D:resourcetype><D:ishidden>0</D:ishidden><D:displayname>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/sccm?/BHN00018/</D:displayname><D:getlastmodified></D:getlastmodified><D:getcontentlanguage/><D:getcontentlength>0</D:getcontentlength></D:prop></D:propstat></D:response><D:response><D:href>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim</D:href><D:propstat><D:status>HTTP/1.1
    200 OK</D:status><D:prop><D:getcontenttype/><D:lockdiscovery/><D:supportedlock/><D:getetag/><D:getcontentlanguage/><D:iscollection>0</D:iscollection><D:creationdate/><D:resourcetype/><D:ishidden>0</D:ishidden><D:displayname>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim</D:displayname><D:getlastmodified>Thu,
    21 Mar 2013 09:21:33 GMT</D:getlastmodified><D:getcontentlength>4984262577</D:getcontentlength></D:prop></D:propstat></D:response></D:multistatus>
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    List of files to be downloaded ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
      File: http://PRBAHVSSCCM.ARABBANKING.LOCAL:80/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    GetDirectoryListing() successfully completed
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    dwStatusCode >= 200 && dwStatusCode <= 299, HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,1304)
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    WinHttpQueryHeaders() returns status code 500 (Internal Server Error)
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    SendWinHttpRequest failed. 801901f4. ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    SendWinHttpRequest (hSession, hConnect, hRequest, sRequest.c_str(), 0, bUseSSL, ullFileSize, LastGoodCredentialsType), HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,1542)
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    DownloadFile failed. 801901f4. ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    DownloadFile (hSession, hConnect, sSourceFile.c_str(), sDestinationFile.c_str(), ulTotalSizeRequired, ulDownLoaded, LastGoodCredentialsType, bUseSSL), HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,1648)
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    Error downloading file from http://PRBAHVSSCCM.ARABBANKING.LOCAL:80/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim to C:\_SMSTaskSequence\Packages\BHN00018\Win7-x86-BasicApps.wim
    ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    DownloadFiles failed. 801901f4. ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    DownloadFiles (setDirs, setFiles, sDestination.c_str(), bUseSSL), HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,2523)
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    Retrying download... ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    Tried all the available http based locations. SMB based locations will be attempted now.
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    !saSMBContentSources.empty(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,2948)
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    DownloadContentAndVerifyHash(pszPackageID, L"SMSPackage", saHttpContentSources, saSMBContentSources, saMulticastContentSources, sDestination, dwFlags, L"", 0, dwPackageFlags, pszUserName, pszUserPassword ), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3106)
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    DownloadContentLocally(pszSource, sSourceDirectory, dwFlags, hUserToken, pszUserName, pszUserPassword), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3331)
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    ResolveSource(pszSource, sSourceDirectory, dwFlags, 0, 0, 0), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3221)
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    TS::Utility::ResolveSource( this->packageID, this->packagePath ), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,1483)
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    resolvePkgSource(), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,1503)
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    Apply(), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,1712)
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    Installation of image 1 in package BHN00018 failed to complete.. 
    The system cannot find the file specified. (Error: 80070002; Source: Windows)
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    installer.install(), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,1787)
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    Entering ReleaseSource() for C:\_SMSTaskSequence\Packages\BHN00018
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    The user tries to release a source directory C:\_SMSTaskSequence\Packages\BHN00018 that is either already released or we have not connected to it
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    InstallImage( g_InstallPackageID, g_ImageIndex, targetVolume, ImageType_Data, g_ConfigPackageID, g_ConfigFileName, false, g_RunFromNet ), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\applyos.cpp,522)
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    Process completed with exit code 2147942402
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    Failed to run the action: Apply Data Image 1. 
    The system cannot find the file specified. (Error: 80070002; Source: Windows)
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    MP server http://PRBAHVSSCCM.ARABBANKING.LOCAL. Ports 80,443. CRL=false.
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    Setting authenticator TSManager
    3/27/2013 3:05:29 PM 1456 (0x05B0)
    Set authenticator in transport TSManager
    3/27/2013 3:05:29 PM 1456 (0x05B0)
    Sending StatusMessage TSManager
    3/27/2013 3:05:29 PM 1456 (0x05B0)
    Setting message signatures. TSManager
    3/27/2013 3:05:29 PM 1456 (0x05B0)
    Setting the authenticator. TSManager
    3/27/2013 3:05:29 PM 1456 (0x05B0)
    CLibSMSMessageWinHttpTransport::Send: URL: PRBAHVSSCCM.ARABBANKING.LOCAL:80  CCM_POST /ccm_system/request
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    Request was succesful. TSManager
    3/27/2013 3:05:29 PM 1456 (0x05B0)
    Set a global environment variable _SMSTSLastActionRetCode=-2147024894
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    Set a global environment variable _SMSTSLastActionSucceeded=false
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    Clear local default environment TSManager
    3/27/2013 3:05:29 PM 1456 (0x05B0)
    Let the parent group (Install Operating System) decides whether to continue execution
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    The execution of the group (Install Operating System) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows)
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    Failed to run the last action: Apply Data Image 1. Execution of task sequence failed.
    The system cannot find the file specified. (Error: 80070002; Source: Windows)
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    MP server http://PRBAHVSSCCM.ARABBANKING.LOCAL. Ports 80,443. CRL=false.
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    and when trying to open location from IIS of the http://localhost:80/SMS_DP_SMSPKG$
    i got the following error
    I don't know it is related or not, do you have any idea about that

    This post may be of some help..
    http://social.technet.microsoft.com/Forums/en-US/configmanagerdeployment/thread/baa2d7e0-599d-4bd0-a375-8905a7d0b2ff/
    Delphin

  • OSD Task Sequence Fails with Error 0x80091007

    Hello Everyone,
    I have a bit of a weird hash mismatch problem.  The issue is only occuring on one laptop.  The laptop was imaged successfully, new out of the box.  Computer started "acting craptacular" according to the tech, so he tried to reimage it,
    assuming one of the applications he put on the computer while setting it up for the user may have messed it up.
    From that point forward, the computer couldn't image anymore.  I can image the same model, TS, and even other models without issue.  The error logs are pointing to a hash value mismatch on the OS WIM. 
    Here are the log files - I wish there was a way to make them cleaner.  I ran some hardware tests with IBM's PCDoctor, and it came back clean.  I'm starting to run out of ideas.
    Thanks in advance!
    Log: (SMSTS.LOG)
    Download done setting progress bar to 100 ApplyOperatingSystem 5/14/2010 4:09:31 PM 840 (0x0348)
    Hash could not be matched for the downloded content. Original ContentHash = A6170DC8CFC5A443636828F093C45377B5FE2A62, Downloaded ContentHash = 7DEBC67B90C2326031EF8727238176C92A02006C ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
    0L == TS::Utility::VerifyPackageHash(pszContentID, sDestination), HRESULT=80091007 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,2901) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
    DownloadContentAndVerifyHash(pszPackageID, L"SMSPackage", saHttpContentSources, saSMBContentSources, saMulticastContentSources, sDestination, dwFlags, L"", 0, dwPackageFlags, pszUserName, pszUserPassword ), HRESULT=80091007 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,3000) ApplyOperatingSystem 5/14/2010
    4:09:53 PM 840 (0x0348)
    DownloadContentLocally(pszSource, sSourceDirectory, dwFlags, hUserToken, pszUserName, pszUserPassword), HRESULT=80091007 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,3128) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
    ResolveSource(pszSource, sSourceDirectory, dwFlags, 0, 0, 0), HRESULT=80091007 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,3029) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
    TS::Utility::ResolveSource( this->packageID, this->packagePath, TS::Utility::ResolveSourceFlags::PersistContents ), HRESULT=80091007 (e:\nts_sms_fre\sms\client\osdeployment\applyos\installimage.cpp,1255) ApplyOperatingSystem 5/14/2010 4:09:53
    PM 840 (0x0348)
    resolvePkgSource(), HRESULT=80091007 (e:\nts_sms_fre\sms\client\osdeployment\applyos\installimage.cpp,1299) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
    Installation of image 1 in package RH1000DD failed to complete..
    The hash value is not correct. (Error: 80091007; Source: Windows) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
    installer.install(), HRESULT=80091007 (e:\nts_sms_fre\sms\client\osdeployment\applyos\installimage.cpp,1373) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
    Entering ReleaseSource() for C:\_SMSTaskSequence\Packages\RH1000DD ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
    The user tries to release a source directory C:\_SMSTaskSequence\Packages\RH1000DD that is either already released or we have not connected to it ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
    InstallImage( g_InstallPackageID, g_ImageIndex, targetVolume, ImageType_OS, g_ConfigPackageID, g_ConfigFileName ), HRESULT=80091007 (e:\nts_sms_fre\sms\client\osdeployment\applyos\applyos.cpp,360) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840
    (0x0348)
    Process completed with exit code 2148077575 TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    !--------------------------------------------------------------------------------------------! TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Failed to run the action: XP SP3 - Multi-HAL.
    The hash value is not correct. (Error: 80091007; Source: Windows) TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Sending status message . . . TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Send a task execution status message SMS_TSExecution_ActionFailError TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    MP server rh1-sccm.ritehite.com and port 80. SSL=false. CRL=false. TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Site code: RH1 TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Client machine name: R842AEYa TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Client Identity: GUID:428CFC8B-1BE1-4E11-B2C4-21E31EA71572 TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Advertisement ID: RH1200C2 TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Package ID: RH1000DF TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Sending StatusMessage TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Formatted header: TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    <Msg SchemaVersion="1.1" ReplyCompression="zlib"><ID/><SourceID>56d444c9-6bf0-4ed2-86a9-5f199c90924c</SourceID><SourceHost/><TargetAddress>mp:[http]MP_StatusManager</TargetAddress><ReplyTo>direct:OSD</ReplyTo><Priority>3</Priority><Timeout>3600</Timeout><SentTime>2010-05-14T21:09:53Z</SentTime><Protocol>http</Protocol><Body
    Type="ByteRange" Offset="0" Length="4246"/><Hooks/><Payload Type="inline"/><TargetHost/><TargetEndpoint>StatusReceiver</TargetEndpoint><ReplyMode>Sync</ReplyMode><CorrelationID/></Msg>
     TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    CLibSMSMessageWinHttpTransport::Send: URL: sccmserver.x.com:80  CCM_POST /ccm_system/request TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    The request has succeeded. 200 OK TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Set a global environment variable _SMSTSLastActionRetCode=-2146889721 TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Clear local default environment TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Let the parent group (Apply Operating System) decides whether to continue execution TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Let the parent group (Install Operating System) decide whether to continue execution TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    The execution of the group (Install Operating System) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows) TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Failed to run the last action: XP SP3 - Multi-HAL. Execution of task sequence failed.
    The hash value is not correct. (Error: 80091007; Source: Windows) TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Sending status message . . . TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Send a task execution status message SMS_TSExecution_TaskSequenceFailError TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)

    Hi Guys,
    My WIM is currently sitting at 1.8 GB, so I'm not sure it is the 4 GB bug you were referring to.
    I haven't tried a re-import/update DP yet mainly because the problem is occuring on only
    one computer at this moment.  In fact, I have deployed several computers already with the same DP, same WIM and even the same model of computer.  That makes me think it isn't an issue with the WIM as
    much as it is an issue with the computer itself.
    Can you guys think of anything on the computer that would cause the failure?
    Thanks again,
    Sean

  • Windows 7 backup fails with Error Code 0x80070002

    I am trying to back up my computer to 32 GB USB flashdrive and I get the error 0x80070002; the system cannot find the file specified.
    I've checked the event logs and I see the error: Event 14, volsnap "The shadow copies of volume C: were aborted because of an IO failure on volume C:."
    I'm running Windows 7 Home Premium, Service Pack 1, 64x.

    As it is a Windows 7 related question, it is recommended to post on Windows 7 forum instead of Windows Server forum:
    http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
    In the meantime a check disk is worth to have a try. Also try to run the backup in off-time to free the system resource. 
    If you have any feedback on our support, please send to [email protected]

  • ReleaseRequest failed with error code 0x80004005 \ Task Sequence Manager could not release active TS request. code 80004005

    Hi All,
    I am trying to deploy an OS but the deployment is failing part way through. I have searched the logs and identified the error: Task Sequence Manager could not release active TS request. code 80004005
    If anyone could assist with this is would be much appreciated.
    Many thanks
    Logs below:
    <![LOG[Unlocked ActualConfig successfully]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="policyutil.cpp:7898">
    <![LOG[Unlocked policy transaction lock successfully]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="policyutil.cpp:7904">
    <![LOG[Raising event:
    instance of CCM_PolicyAgent_SettingsEvaluationComplete
    ClientID = "GUID:8388E2E2-7642-4436-88D0-FC9335F6D56E";
    DateTime = "20141218122103.273000+000";
    PolicyNamespace = "\\\\wst0339\\root\\ccm\\policy\\machine\\actualconfig";
    ProcessID = 1748;
    ThreadID = 1752;
    ]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="event.cpp:729">
    <![LOG[Successfully submitted event to the Status Agent.]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="event.cpp:747">
    <![LOG[End TS policy evaluation]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="policyutil.cpp:10580">
    <![LOG[Policy evaluation initiated]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:3387">
    <![LOG[Sending success status message]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanager.cpp:659">
    <![LOG[MP server http://LONSVR0150.uk.ham.local. Ports 80,443. CRL=false.]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4855">
    <![LOG[Setting authenticator]LOG]!><time="12:21:03.288+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4877">
    <![LOG[Set authenticator in transport]LOG]!><time="12:21:03.288+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="libsmsmessaging.cpp:7592">
    <![LOG[Sending StatusMessage]LOG]!><time="12:21:03.304+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="libsmsmessaging.cpp:4020">
    <![LOG[Setting message signatures.]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:1292">
    <![LOG[Setting the authenticator.]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:1322">
    <![LOG[CLibSMSMessageWinHttpTransport::Send: URL: LONSVR0150.uk.ham.local:80  CCM_POST /ccm_system/request]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="1"
    thread="1752" file="libsmsmessaging.cpp:8422">
    <![LOG[Request was succesful.]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:8758">
    <![LOG[Finalize logging request ignored from process 1748]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tslogging.cpp:1737">
    <![LOG[Waiting for CcmExec service to be fully operational]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4019">
    <![LOG[CcmExec service is up and fully operational]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4024">
    <![LOG[Access handle will be read from _SMSTSActiveRequestHandle]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:99">
    <![LOG[Access handle: {9F9B91DA-055D-4B32-9817-52C369835080}]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:111">
    <![LOG[Attempting to release request using {9F9B91DA-055D-4B32-9817-52C369835080}]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752"
    file="tsmanagerutils.cpp:118">
    <![LOG[CoCreateInstance succeeded]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:133">
    <![LOG[pISoftwareExecutionRequestMgr->ReleaseRequest(ActiveRequestGUID), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanagerutils.cpp,136)]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager"
    context="" type="0" thread="1752" file="tsmanagerutils.cpp:136">
    <![LOG[ReleaseRequest failed with error code 0x80004005]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="3" thread="1752" file="tsmanagerutils.cpp:136">
    <![LOG[Task Sequence Manager could not release active TS request. code 80004005]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="2" thread="1752"
    file="tsmanagerutils.cpp:165">
    <![LOG[Process completed with exit code 0]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="TSMBootstrap" context="" type="1" thread="1728" file="commandline.cpp:1098">
    <![LOG[Exiting with return code 0x00000000]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="TSMBootstrap" context="" type="1" thread="1728" file="tsmbootstrap.cpp:1032">
    <![LOG[Process completed with exit code 0]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="commandline.cpp:1098">
    <![LOG[Task sequence completed 0x00000000]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1384">
    <![LOG[Uninstalling Setup Hook]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1427">
    <![LOG[Removing setup hook from registry.]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="0" thread="788" file="vistasetuphook.cpp:143">
    <![LOG[Successfully removed C:\WINDOWS\system32\OSDGINA.DLL]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1183">
    <![LOG[Successfully removed C:\WINDOWS\system32\OSDSETUPHOOK.EXE]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1183">
    <![LOG[Successfully removed C:\WINDOWS\system32\_SMSOSDSetup]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1220">

    4005 can mean a few things,  Some common can be  The wrong BIOS time,  or a a bad Hard drive.   look at those two first. 

  • Task Sequence has failed with error code: 0x80070570

    I've created task sequence for Windows XP OS Deployment. WinPE boot image loads successfully, Partitions are formatted successfully too. But during "Applying image 1 from volume C:\" I receive following error:
    Task Sequence: My_task_sequence_name has failed with error code: 0x80070570.
    What I need to do? Any ideas? (My computer has following details: ASUS P5KSE motherboard, Core 2 Duo, SATA HDD, Atheros L1 adapter)

    No, a build and capture task sequence automates the build of the image removing any and all human intervention so that rebuilding or refreshing an image becomes a simple matter. Building images by actually manually installing Windows is anti-IT.
    File corruption can be caused by many, many things; e.g., anti-virus, physical disk errors, network transmit errors, etc.
    Jason | http://myitforum.com/cs2/blogs/jsandys | http://blogs.catapultsystems.com/jsandys/default.aspx | Twitter @JasonSandys

  • SCCM 2012 CU2 OSD forest trust: ReleaseRequest failed with error code 0x87d00317

    Hello,
    Actually i have a difficult Problem with my SCCM 2012 R2 CU2 Windows 7 x64 SP1 Tasksequence:
    I get the folowing error in smsts.log:
    ::RegQueryValueExW(hSubKey, szReg, NULL, NULL, NULL, &dwSize), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\utils.cpp,811) TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    RegQueryValueExW is unsuccessful for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgram TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    GetTsRegValue() is unsuccessful. 0x80070002. TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    End program:  TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    Finalize logging request ignored from process 1736 TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    Waiting for CcmExec service to be fully operational TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    CcmExec service is up and fully operational TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    Access handle will be read from _SMSTSActiveRequestHandle TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    Access handle: {B699D570-B2BF-4874-8CB7-3B208B380969} TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    Attempting to release request using {B699D570-B2BF-4874-8CB7-3B208B380969} TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    CoCreateInstance succeeded TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    pISoftwareExecutionRequestMgr->ReleaseRequest(ActiveRequestGUID), HRESULT=87d00317 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanagerutils.cpp,136) TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    ReleaseRequest failed with error code 0x87d00317 TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    Task Sequence Manager could not release active TS request. code 87D00317 TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
    Here is the complete smsts.log: http://1drv.ms/1pwTEBf
    To explain the Problem in Detail:
    The SCCM Primary Site Server and the Clients are in different trusted (bidirectional) forests!
    Everythings working fine in this Scenario, I can install SCCM Agent on the Clients with Manual ccmsetup and with Client Push Installation. Additionally i can deploy Software Updates and so on... only OSD is crashing in the releaserequest step.
    During my Tasksequence new Clients are joined to Domain A while SCCM Primary Site Server is installed in Domain B
    If I change my TS and let the Clients also join Domain B everything works without any Problems and the Tasksequence finish without any Errors.
    My Problem must be related to the different Domains and the forest trust.
    My Setup:
    MP published to DNS in both domains
    Schema Extended in both domains
    System Management Container published and verified in both domains
    ccmsetup Parameters in TS: ccmsetup SMSMP=sccm.domain.b FSP=sccm.domain.b DNSSUFFIX=Domain.b
    Network Access account configured with Domain B account
    Domain Join account has create Computer rights on the OU in Domain A (Domain join is successful)
    DNs conditional forwarders configured in both Domains and DNS resolutin is working in both directions
    Any suggestions?
    Many thanks.
    regards,
    Christian

    Hi Christian,
    So do you actual get an error message in your TS or is it just failing to join Domain B?  (Could be both if the machines fails to join the domain).
    Can you review netsetup.log on the machines after the issue and see what error message you might be getting during the domain join process?
    Also, if it a domain join issue, can you try manually joining to domain B using the same service account?

  • TS: ReleaseRequest failed with error code 0x80004005... Help..

    This error popped up.. Any ideas?
    started seeing this error:<![LOG[Access handle will be read from _SMSTSActiveRequestHandle]LOG]!><time="13:04:07.065-60" date="02-21-2014" component="TSManager" context="" type="1" thread="2940" file="tsmanagerutils.cpp:100">
    <![LOG[Access handle: {CA7B9D19-7EA9-4E71-BF54-82671EC3E2D1}]LOG]!><time="13:04:07.065-60" date="02-21-2014" component="TSManager" context="" type="1" thread="2940" file="tsmanagerutils.cpp:111">
    <![LOG[Attempting to release request using {CA7B9D19-7EA9-4E71-BF54-82671EC3E2D1}]LOG]!><time="13:04:07.065-60" date="02-21-2014" component="TSManager" context="" type="1" thread="2940" file="tsmanagerutils.cpp:119">
    <![LOG[CoCreateInstance succeeded]LOG]!><time="13:04:07.065-60" date="02-21-2014" component="TSManager" context="" type="1" thread="2940" file="tsmanagerutils.cpp:133">
    <![LOG[pISoftwareExecutionRequestMgr->ReleaseRequest(ActiveRequestGUID), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanagerutils.cpp,136)]LOG]!><time="13:04:07.065-60" date="02-21-2014" component="TSManager" context="" type="0" thread="2940" file="tsmanagerutils.cpp:136">
    <![LOG[ReleaseRequest failed with error code 0x80004005]LOG]!><time="13:04:07.065-60" date="02-21-2014" component="TSManager" context="" type="3" thread="2940" file="tsmanagerutils.cpp:136">
    <![LOG[Task Sequence Manager could not release active TS request. code 80004005]LOG]!><time="13:04:07.065-60" date="02-21-2014" component="TSManager" context="" type="2" thread="2940" file="tsmanagerutils.cpp:166">
    <![LOG[Process completed with exit code 0]LOG]!><time="13:04:07.080-60" date="02-21-2014" component="TSMBootstrap" context="" type="1" thread="2848" file="commandline.cpp:1123">
    <![LOG[Exiting with return code 0x00000000]LOG]!><time="13:04:07.080-60" date="02-21-2014" component="TSMBootstrap" context="" type="1" thread="2848" file="tsmbootstrap.cpp:1195">
    <![LOG[Process completed with exit code 0]LOG]!><time="13:04:07.096-60" date="02-21-2014" component="OSDSetupHook" context="" type="1" thread="560" file="commandline.cpp:1123">
    <![LOG[Task sequence completed 0x00000000]LOG]!><time="13:04:07.096-60" date="02-21-2014" component="OSDSetupHook" context="" type="1" thread="560" file="basesetuphook.cpp:1523">
    <![LOG[Uninstalling Setup Hook]LOG]!><time="13:04:13.283-60" date="02-21-2014" component="OSDSetupHook" context="" type="1" thread="560" file="basesetuphook.cpp:1566">
    <![LOG[Removing setup hook from registry.]LOG]!><time="13:04:13.283-60" date="02-21-2014" component="OSDSetupHook" context="" type="0" thread="560" file="vistasetuphook.cpp:143">
    <![LOG[Successfully removed C:\WINDOWS\system32\OSDGINA.DLL]LOG]!><time="13:04:13.283-60" date="02-21-2014" component="OSDSetupHook" context="" type="1" thread="560" file="basesetuphook.cpp:1312">
    <![LOG[Successfully removed C:\WINDOWS\system32\OSDSETUPHOOK.EXE]LOG]!><time="13:04:13.283-60" date="02-21-2014" component="OSDSetupHook" context="" type="1" thread="560" file="basesetuphook.cpp:1312">
    <![LOG[Successfully removed C:\WINDOWS\system32\_SMSOSDSetup]LOG]!><time="13:04:13.283-60" date="02-21-2014" component="OSDSetupHook" context="" type="1" thread="560" file="basesetuphook.cpp:1349">
    <![LOG[RegQueryValueExW failed for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgram]LOG]!><time="13:04:13.283-60" date="02-21-2014" component="OSDSetupHook" context="" type="2" thread="560" file="utils.cpp:261">
    <![LOG[GetTsRegValue() failed. 0x80070002.]LOG]!><time="13:04:13.283-60" date="02-21-2014" component="OSDSetupHook" context="" type="2" thread="560" file="utils.cpp:279">
    <![LOG[End program: ]LOG]!><time="13:04:13.283-60" date="02-21-2014" component="OSDSetupHook" context="" type="1" thread="560" file="basesetuphook.cpp:1580">
    Kindest regards, Martin

    well.. it seems it finished the deployment of my client (windows 7) but at the end of the smsts.log I see the above..
    I am just wondering what the cause of the issue is.. and how I can fix it..
    Kindest regards, Martin

  • Client push error CcmSetup failed with error code 0x8007064c

    Installing file 'C:\WINDOWS\ccmsetup\Silverlight.exe' with options '/q'.
    File 'C:\WINDOWS\ccmsetup\Silverlight.exe' returned failure exit code 1612. Fail the installation.
    InstallFromManifest failed 0x8007064c
    ITaskScheduler::Delete failed to delete task Configuration Manager Client Retry Task (0x80070002).
    CcmSetup failed with error code 0x8007064c
    This error i faced while Upgrading client on Windows Server 2003 ,that i upgraded my SCCM 2012 SP1 to SCCM2012 R2 
    i tried to uninstall the client and done successfully , while pushing the client again I've the same Error code.
    i searched and found SMS 2003 toolkit 2 fixed the problem for some people but i did not .

    <![LOG[==========[ ccmsetup started in process 8108 ]==========]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:9437">
    <![LOG[Running on platform X86]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="util.cpp:1837">
    <![LOG[Updated security on object C:\WINDOWS\ccmsetup\cache\.]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="0" thread="5432" file="ccmsetup.cpp:9281">
    <![LOG[Launch from folder C:\Setup\Client\]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:721">
    <![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:727">
    <![LOG[Running on 'Microsoft(R) Windows(R) Server 2003, Standard Edition' (5.2.3790). Service Pack (2.0). SuiteMask = 272. Product Type = 18]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="util.cpp:1919">
    <![LOG[Ccmsetup command line: C:\Setup\Client\ccmsetup.exe  SMSSLP=ldcsccm1v.linkdc.local  SMSSITECODE=ldc DNSSUFFIX=linkdc.local]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:3590">
    <![LOG[Command line parameters for ccmsetup have been specified.  No registry lookup for command line parameters is required.]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:3775">
    <![LOG[Command line: C:\Setup\Client\ccmsetup.exe  SMSSLP=ldcsccm1v.linkdc.local  SMSSITECODE=ldc DNSSUFFIX=linkdc.local]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:3776">
    <![LOG[SslState value: 224]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="0" thread="5432" file="ccmsetup.cpp:4425">
    <![LOG[No version of the client is currently detected.]LOG]!><time="15:37:25.907-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:2748">
    <![LOG[Updated security on object C:\WINDOWS\ccmsetup\.]LOG]!><time="15:37:25.938-180" date="08-05-2014" component="ccmsetup" context="" type="0" thread="5432" file="ccmsetup.cpp:9281">
    <![LOG[A Fallback Status Point has not been specified.  Message with STATEID='100' will not be sent.]LOG]!><time="15:37:25.938-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:9763">

  • Request User State Store Fails with error code 0x00004005

    I am trying to get a machine refresh working in SCCM and am running into a road block with the user state migration. The Task sequence hits Request user state store and then fails. In the logs on the machine it shows it downloads the cert from the SMP but it fails to verify the cert. The thing is that this was working and then stopped for no apparent reason. I have added a second SMP and it has the same issue so its got to be something environmental causing this. I have found no references to the errors I am recieving that relate to the issue so I am stumped. We have a SCCM 2007 site in mixed mode. The error log is:
    The task sequence execution engine failed executing the action (Request User State Storage) in the group (Capture User Files and Settings) with the error code 16389 Action output: ployment\osdsmpclient\smpclient.cpp,1743) Request to SMP 'ATXFREPSMS01.NA.atxglobal.com' failed with error (Code 0x80090006). Trying next SMP. FALSE, HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osdsmpclient\smpclient.cpp,1698) pClientRequestToSMP->Execute(migInfoFromMP.saSMPs), HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osdsmpclient\smpclient.cpp,2713) ExecuteCaptureRequestToSMP(migInfoFromMP), HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osdsmpclient\smpclient.cpp,2755) ExecuteCaptureRequest(), HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osdsmpclient\main.cpp,72) OSDSMPClient finished: 0x00004005 Failed to verify certificate signature for 'ATXFREPSMS01.NA.atxglobal.com' (0x80090006) ClientKeyRequestToSMP failed (0x80090006). ClientRequestToSMP:oRequest failed. error = (0x80090006). Failed to find an SMP that can serve request after trying 4 attempts. ExecuteCaptureRequestSMP failed (0x80004005). ExecuteCaptureRequest failed (0x80004005).. The operating system reported error 16389:

    Hi
    I am getting the same issue.
    More info:
    The same task works ok for one client - an xp machine that was upgraded to vista sp1 using sccm but without usmt.
    If I send this machine a task which includes usmt and os deploy it works.
    On 2 other machines ( so far) , the request store fails with the same error  - 0x80090006. (one of them existing vista and the other xp)
    I have tried removing and adding the client from the domain but it did not help.
    Any idea?
    David

  • The AcquireConnection method call failed with error code 0xC0202009.

    I've seen the previous threads on this (although maybe not all of them). However, i don't think I'm getting the error for the same reason. The full error I'm getting is:
    - Pre-execute (Error)
    Messages
    Error 0xc0202009: {F1B3B35C-FAE3-48F6-A169-4E4D8D99F9B6}: An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft JET Database Engine"  Hresult: 0x80004005  Description: "Unspecified error".
     (SQL Server Import and Export Wizard)
    Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "DestinationConnectionExcel" failed with error code 0xC0202009.
     (SQL Server Import and Export Wizard)
    Error 0xc004701a: Data Flow Task: component "Destination 64 - production_effectivities" (7042) failed the pre-execute phase and returned error code 0xC020801C.
     (SQL Server Import and Export Wizard)
    The entire package is running on one machine. The data source is SQL Server 2005 and the destination (this happens with both of them) is Excel or Access. Either way I cannot get the package which the wizard generated to run at all. This error occurs after the first table is exported. I'm running on WinXP SP2 with 2005 Developer and ALL components installed except analysis services.
    Anyone else have this problem or know the solution?
    Jeff

    I am getting the same error. My Destination and source both are on SQL Server 2005 on the same box.
    I am using SQL- Code for Source and and table as destination. When the package runnes under Transaction- TransactionOption-Supported then the packages excuted fine but it fails when i change the Transaction- TransactionOption to Required.
    It fails with following error code.
    [OLE DB Destination [22]] Error: The AcquireConnection method call to the connection manager "FMFCLSQADB01.DWH_Rakesh" failed with error code 0xC0202009.
    [DTS.Pipeline] Error: component "OLE DB Destination" (22) failed the pre-execute phase and returned error code 0xC020801C.
    [Connection manager "FMFCLSQADB01.DWH_Rakesh"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
    [Connection manager "FMFCLSQADB01.DWH_Rakesh"] Error: An OLE DB error has occurred. Error code: 0x8004D00A.
    When i change the source SQL query to Table or View then it works fine.
    Thanks for any suggestion.
    Regards
    Rakesh
    Now, my issues related to “SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction."…..”. are fixed.
    This is one of the very common errors that comes up in SSIS (SQL Server Integration service) 
    I have faced this issue for at-least two occasions. Both of them have one common setting: “TransactionOption” was set to “Required”.
    In first case, I had multiple dataflow tasks but there were no sequence given. There were no error if I ran the package with TransactionOption=Supported. But when I ran the package in TransactionOption= Required, it got failed.
    To fix the issue I have changed my package and put the entire dataflow task one after another (connected thru Constraint).  
    In another case, where I was doing data transfer from one server to another, I had to configure the MSDTC.

  • DAG - Backup failing on 1 DB only with error - The Microsoft Exchange Replication service VSS Writer instance ID failed with error code 80070020 when preparing for a backup of database 'DB012'

    Hi Board,
    i´ve search across the board, technet and symantec sites but did not found a hint about my problem.
    we drive a 2 node DAG (Location1-Ex1-mb1 
    Location2-exc1-mb1), on SP2 RU4 patchlevel with 40 Databases.
    Since some time the backup of one - and only one DB - is failing with these events, logged on the Mailboxserver on which the passive DB is hosted.
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          28.09.2012 00:37:17
    Event ID:      2112
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      Location1-Exc1-MB1
    Description: The Microsoft Exchange Replication service VSS Writer instance 1ab7d204-609a-4aea-b0a7-70afb0db38de failed with error code 80070020 when preparing for a backup of database 'DB012'.
    Followed by
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:         
    01.10.2012 03:33:06
    Event ID:      2024
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:         
    N/A
    Computer:      Location1-Exc1-MB1
    Description:
    The Microsoft Exchange Replication service VSS Writer (Instance 42916d80-36c1-4f73-86d0-596d30226349) failed with error 80070020 when preparing for a backup.
    The backup Application - Symantec Backup Exec 2010 R3 – states, this error
    Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
    Check the Windows Event Viewer for details.
    Writer Name: Exchange Server, Writer ID: {76FE1AC4-15F7-4BCD-987E-8E1ACB462FB7}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Stable (1).
    Symatec suggests within http://www.symantec.com/business/support/index?page=content&id=TECH184095
    to restart the MS Exchange Replication Service – BUT the mentioned eventID
    8229 isn´t present on any of the both Mailboxservers.
    The affected Database is active on Location2-Exc1-Mb1 Server and in an overall healthy state. I found during my research, that below Location2-Exc1-Mb1 Server, there are not removed shadow copies present!
    This confuses me, since all Backups are normally taken from the passive copy of a Database.
    So my questions to the board are:
    * Does anyone is facing similar issues?
    * Can someone explain why snapshots are present on the Mailboxserver hosting the Active Database, whilst the errors are logged on the passive one?
    -          * Does someone know the conditions, why shadows copies remain and
    aren´t removed in a proper manner?
    What can cause the circumstance, that only 1 DB is facing such issues?
    Any suggestion is welcome!
    BR
    Markus

    Hi Lenora,
    I´ve encreases VSS / Exchange Backup Log levels to expert, before starting
    those things i´ve all tried now:
    - Backup from passive DB (forced within Symantec Backup Exec)
    - Backup from active DB (forced within Symantec Backup Exec)
    - Backup from passive DB without GRT enabled (forced within Symantec Backup Exec)
    - Backup from active DB without GRT enabled(forced within Symantec Backup Exec)
    All those attempts failed.
    But brought some more details - the backup against the active DB states, that there is still a backup in progress and therefore this backup is cancelled by VSS.
    The Solution was, that i´ve needed to restart the Exchange Replication Service on the Mailbox Server hosting the passive DB.
    Backups are working again on all DBs!
    THX for your replys.
    Best regards
    Markus

  • SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

    Hi,
    This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
    Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
    So far I have installed
    http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
    I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
    2012 release.
    Here is the detail of error message:
    TITLE: Package Validation Error
    Package Validation Error
    ADDITIONAL INFORMATION:
    Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection
    Manager" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.
    Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
    Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
    Error at Data Flow Task: There were errors during task validation.
    Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft Access Database Engine"  Hresult: 0x80004005  Description: "Unspecified error".
     (Microsoft.DataTransformationServices.VsIntegration)
    Here are my environment details:
    SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
    Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
    Services Project2\Integration Services Project2\Package.dtsx.
    Does this kind of Shared drives have any impact to give this issue?
    Thanks in advance!
    Ketan
    P.S.: I had look at this forum question -->
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

    Hi Arthur,
    Thanks for your response.
    Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
    1) Some times excel source files cannot be parsed by excel source connection manager.
    2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage  while destination mapping.
    3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file.  <-- For
    this we tried IMEX setting also
    4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
    I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
    As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
    Do you think it is advisable to convert Excel into CSV or Flat file.
    Thanks,
    Ketan

  • [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

    Error
    [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.  There
    may be error message
    I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
    My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
    But the error still occurs .
    I checked on Google and  many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
    Mudassar

    Thats my connection string
    Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
    Excel 2010 installed and its 32 bit edition
    Are you referring to install this component -AccessDatabaseEngine_x64.exe?
    http://www.microsoft.com/en-us/download/details.aspx?id=13255
    Mudassar
    You can try an OLEDB provider in that case
    see
    http://dataintegrity.wordpress.com/2009/10/16/xlsx/
    you might need to download and install ms access redistributable
    http://www.microsoft.com/en-in/download/details.aspx?id=13255
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Maybe you are looking for