OSD Task Sequence Fails with Error 0x80091007

Hello Everyone,
I have a bit of a weird hash mismatch problem. The issue is only occuring on one laptop. The laptop was imaged successfully, new out of the box. Computer started "acting craptacular" according to the tech, so he tried to reimage it,
assuming one of the applications he put on the computer while setting it up for the user may have messed it up.
From that point forward, the computer couldn't image anymore. I can image the same model, TS, and even other models without issue. The error logs are pointing to a hash value mismatch on the OS WIM.
Here are the log files - I wish there was a way to make them cleaner. I ran some hardware tests with IBM's PCDoctor, and it came back clean. I'm starting to run out of ideas.
Thanks in advance!
Log: (SMSTS.LOG)
Download done setting progress bar to 100 ApplyOperatingSystem 5/14/2010 4:09:31 PM 840 (0x0348)
Hash could not be matched for the downloded content. Original ContentHash = A6170DC8CFC5A443636828F093C45377B5FE2A62, Downloaded ContentHash = 7DEBC67B90C2326031EF8727238176C92A02006C ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
0L == TS::Utility::VerifyPackageHash(pszContentID, sDestination), HRESULT=80091007 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,2901) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
DownloadContentAndVerifyHash(pszPackageID, L"SMSPackage", saHttpContentSources, saSMBContentSources, saMulticastContentSources, sDestination, dwFlags, L"", 0, dwPackageFlags, pszUserName, pszUserPassword ), HRESULT=80091007 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,3000) ApplyOperatingSystem 5/14/2010
4:09:53 PM 840 (0x0348)
DownloadContentLocally(pszSource, sSourceDirectory, dwFlags, hUserToken, pszUserName, pszUserPassword), HRESULT=80091007 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,3128) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
ResolveSource(pszSource, sSourceDirectory, dwFlags, 0, 0, 0), HRESULT=80091007 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,3029) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
TS::Utility::ResolveSource( this->packageID, this->packagePath, TS::Utility::ResolveSourceFlags::PersistContents ), HRESULT=80091007 (e:\nts_sms_fre\sms\client\osdeployment\applyos\installimage.cpp,1255) ApplyOperatingSystem 5/14/2010 4:09:53
PM 840 (0x0348)
resolvePkgSource(), HRESULT=80091007 (e:\nts_sms_fre\sms\client\osdeployment\applyos\installimage.cpp,1299) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
Installation of image 1 in package RH1000DD failed to complete..
The hash value is not correct. (Error: 80091007; Source: Windows) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
installer.install(), HRESULT=80091007 (e:\nts_sms_fre\sms\client\osdeployment\applyos\installimage.cpp,1373) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
Entering ReleaseSource() for C:\_SMSTaskSequence\Packages\RH1000DD ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
The user tries to release a source directory C:\_SMSTaskSequence\Packages\RH1000DD that is either already released or we have not connected to it ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
InstallImage( g_InstallPackageID, g_ImageIndex, targetVolume, ImageType_OS, g_ConfigPackageID, g_ConfigFileName ), HRESULT=80091007 (e:\nts_sms_fre\sms\client\osdeployment\applyos\applyos.cpp,360) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840
(0x0348)
Process completed with exit code 2148077575 TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
!--------------------------------------------------------------------------------------------! TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Failed to run the action: XP SP3 - Multi-HAL.
The hash value is not correct. (Error: 80091007; Source: Windows) TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Sending status message . . . TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Send a task execution status message SMS_TSExecution_ActionFailError TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
MP server rh1-sccm.ritehite.com and port 80. SSL=false. CRL=false. TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Site code: RH1 TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Client machine name: R842AEYa TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Client Identity: GUID:428CFC8B-1BE1-4E11-B2C4-21E31EA71572 TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Advertisement ID: RH1200C2 TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Package ID: RH1000DF TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Sending StatusMessage TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Formatted header: TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
<Msg SchemaVersion="1.1" ReplyCompression="zlib"><ID/><SourceID>56d444c9-6bf0-4ed2-86a9-5f199c90924c</SourceID><SourceHost/><TargetAddress>mp:[http]MP_StatusManager</TargetAddress><ReplyTo>direct:OSD</ReplyTo><Priority>3</Priority><Timeout>3600</Timeout><SentTime>2010-05-14T21:09:53Z</SentTime><Protocol>http</Protocol><Body
Type="ByteRange" Offset="0" Length="4246"/><Hooks/><Payload Type="inline"/><TargetHost/><TargetEndpoint>StatusReceiver</TargetEndpoint><ReplyMode>Sync</ReplyMode><CorrelationID/></Msg>
TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
CLibSMSMessageWinHttpTransport::Send: URL: sccmserver.x.com:80 CCM_POST /ccm_system/request TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
The request has succeeded. 200 OK TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Set a global environment variable _SMSTSLastActionRetCode=-2146889721 TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Clear local default environment TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Let the parent group (Apply Operating System) decides whether to continue execution TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Let the parent group (Install Operating System) decide whether to continue execution TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
The execution of the group (Install Operating System) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Failed to run the last action: XP SP3 - Multi-HAL. Execution of task sequence failed.
The hash value is not correct. (Error: 80091007; Source: Windows) TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Sending status message . . . TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Send a task execution status message SMS_TSExecution_TaskSequenceFailError TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)

Hi Guys,
My WIM is currently sitting at 1.8 GB, so I'm not sure it is the 4 GB bug you were referring to.
I haven't tried a re-import/update DP yet mainly because the problem is occuring on only
one computer at this moment. In fact, I have deployed several computers already with the same DP, same WIM and even the same model of computer. That makes me think it isn't an issue with the WIM as
much as it is an issue with the computer itself.
Can you guys think of anything on the computer that would cause the failure?
Thanks again,
Sean

Similar Messages

Task sequence failed with error code 0x80070002

I am facing issue in OS deployment my machine PXE boot successfully but on the step of apply operating I got an error "task sequence failed with error code 0x80070002"
I see lot of thread describes to add Network Access Account I already added but still I receive same error please help
Usama Arif

i had this happen on two of my dp's the other day. It drove me nuts, I ended up removing the DP Role, removing the server from SCCM
I then deleted all files on the 'D :' drive
after everything was deleted, I re-added the Server to SCCM and gave it the DP Role back.
I then added the DP Back to the DP Group to receive all packages that was on it before. then finally once everything was re-uploaded my users were able to pxe boot again

Task sequence failed with error 80070002

Dears,
I'm trying deploy OSD, it was working since yesterday but from today I'm facing a problem it's fails with the above error, i got the log file smsts and here it is
Set command line: "OSDApplyOS.exe" /data:BHN00018,1 /target:0,1
ApplyOperatingSystem 3/27/2013 3:05:22 PM
1828 (0x0724)
Adding logical drive: C: ApplyOperatingSystem
3/27/2013 3:05:22 PM 1828 (0x0724)
Skipping non-local logical drive: E: ApplyOperatingSystem
3/27/2013 3:05:22 PM 1828 (0x0724)
Adding logical drive: S: ApplyOperatingSystem
3/27/2013 3:05:22 PM 1828 (0x0724)
Skipping non-local logical drive: X: ApplyOperatingSystem
3/27/2013 3:05:22 PM 1828 (0x0724)
The volume S:\ exists and is a local hard drive.
ApplyOperatingSystem 3/27/2013 3:05:22 PM
1828 (0x0724)
The volume S:\ is using a valid file system.
ApplyOperatingSystem 3/27/2013 3:05:22 PM
1828 (0x0724)
Windows target partition is 0-1, driver letter is S:\
ApplyOperatingSystem 3/27/2013 3:05:22 PM
1828 (0x0724)
Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'
ApplyOperatingSystem 3/27/2013 3:05:22 PM
1828 (0x0724)
The machine does not have a local client cache.
ApplyOperatingSystem 3/27/2013 3:05:22 PM
1828 (0x0724)
ResolveSource flags: 0x00000000 ApplyOperatingSystem
3/27/2013 3:05:22 PM 1828 (0x0724)
SMSTSPersistContent: . The content for package BHN00018 will be persisted
ApplyOperatingSystem 3/27/2013 3:05:22 PM
1828 (0x0724)
DownloadOnDemand flag is true. Attempting to download content locally for Package BHN00018..
ApplyOperatingSystem 3/27/2013 3:05:22 PM
1828 (0x0724)
Package Flags: 0x1000000 ApplyOperatingSystem
3/27/2013 3:05:22 PM 1828 (0x0724)
GetDirectoryListing() entered ApplyOperatingSystem
3/27/2013 3:05:22 PM 1828 (0x0724)
Initializing HTTP transport. ApplyOperatingSystem
3/27/2013 3:05:22 PM 1828 (0x0724)
Setting URL = http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/BHN00018.
ApplyOperatingSystem 3/27/2013 3:05:22 PM
1828 (0x0724)
Address=http://PRBAHVSSCCM.ARABBANKING.LOCAL, Scheme=http, Object=/SMS_DP_SMSPKG$/BHN00018, Port=80.
ApplyOperatingSystem 3/27/2013 3:05:22 PM
1828 (0x0724)
Setting Authenticator. ApplyOperatingSystem
3/27/2013 3:05:22 PM 1828 (0x0724)
Set authenticator in transport ApplyOperatingSystem
3/27/2013 3:05:22 PM 1828 (0x0724)
WinHttp credentials set ApplyOperatingSystem
3/27/2013 3:05:22 PM 1828 (0x0724)
CLibSMSMessageWinHttpTransport::Send: URL: PRBAHVSSCCM.ARABBANKING.LOCAL:80 PROPFIND /SMS_DP_SMSPKG$/BHN00018
ApplyOperatingSystem 3/27/2013 3:05:22 PM
1828 (0x0724)
401 - Authentication failure on request with anonymous access, retrying with context credentials.
ApplyOperatingSystem 3/27/2013 3:05:22 PM
1828 (0x0724)
Using thread token for request ApplyOperatingSystem
3/27/2013 3:05:22 PM 1828 (0x0724)
401 - Authentication failure on request with context credentials, retrying with supplied credentials.
ApplyOperatingSystem 3/27/2013 3:05:22 PM
1828 (0x0724)
Request was succesful. ApplyOperatingSystem
3/27/2013 3:05:22 PM 1828 (0x0724)
DAV response string is:
<?xml version="1.0" encoding="utf-8" ?><D:multistatus xmlns:D="DAV:"><D:response><D:href>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/sccm?/BHN00018/</D:href><D:propstat><D:status>HTTP/1.1
200 OK</D:status><D:prop><D:getcontenttype/><D:supportedlock/><D:getetag/><D:creationdate/><D:iscollection>1</D:iscollection><D:resourcetype><D:collection/></D:resourcetype><D:ishidden>0</D:ishidden><D:displayname>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/sccm?/BHN00018/</D:displayname><D:getlastmodified></D:getlastmodified><D:getcontentlanguage/><D:getcontentlength>0</D:getcontentlength></D:prop></D:propstat></D:response><D:response><D:href>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim</D:href><D:propstat><D:status>HTTP/1.1
200 OK</D:status><D:prop><D:getcontenttype/><D:lockdiscovery/><D:supportedlock/><D:getetag/><D:getcontentlanguage/><D:iscollection>0</D:iscollection><D:creationdate/><D:resourcetype/><D:ishidden>0</D:ishidden><D:displayname>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim</D:displayname><D:getlastmodified>Thu,
21 Mar 2013 09:21:33 GMT</D:getlastmodified><D:getcontentlength>4984262577</D:getcontentlength></D:prop></D:propstat></D:response></D:multistatus>
ApplyOperatingSystem 3/27/2013 3:05:22 PM
1828 (0x0724)
List of files to be downloaded ApplyOperatingSystem
3/27/2013 3:05:22 PM 1828 (0x0724)
File: http://PRBAHVSSCCM.ARABBANKING.LOCAL:80/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim
ApplyOperatingSystem 3/27/2013 3:05:22 PM
1828 (0x0724)
GetDirectoryListing() successfully completed
ApplyOperatingSystem 3/27/2013 3:05:22 PM
1828 (0x0724)
Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'
ApplyOperatingSystem 3/27/2013 3:05:22 PM
1828 (0x0724)
dwStatusCode >= 200 && dwStatusCode <= 299, HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,1304)
ApplyOperatingSystem 3/27/2013 3:05:23 PM
1828 (0x0724)
WinHttpQueryHeaders() returns status code 500 (Internal Server Error)
ApplyOperatingSystem 3/27/2013 3:05:23 PM
1828 (0x0724)
SendWinHttpRequest failed. 801901f4. ApplyOperatingSystem
3/27/2013 3:05:23 PM 1828 (0x0724)
SendWinHttpRequest (hSession, hConnect, hRequest, sRequest.c_str(), 0, bUseSSL, ullFileSize, LastGoodCredentialsType), HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,1542)
ApplyOperatingSystem 3/27/2013 3:05:23 PM
1828 (0x0724)
DownloadFile failed. 801901f4. ApplyOperatingSystem
3/27/2013 3:05:23 PM 1828 (0x0724)
DownloadFile (hSession, hConnect, sSourceFile.c_str(), sDestinationFile.c_str(), ulTotalSizeRequired, ulDownLoaded, LastGoodCredentialsType, bUseSSL), HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,1648)
ApplyOperatingSystem 3/27/2013 3:05:23 PM
1828 (0x0724)
Error downloading file from http://PRBAHVSSCCM.ARABBANKING.LOCAL:80/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim to C:\_SMSTaskSequence\Packages\BHN00018\Win7-x86-BasicApps.wim
ApplyOperatingSystem
3/27/2013 3:05:23 PM 1828 (0x0724)
DownloadFiles failed. 801901f4. ApplyOperatingSystem
3/27/2013 3:05:23 PM 1828 (0x0724)
DownloadFiles (setDirs, setFiles, sDestination.c_str(), bUseSSL), HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,2523)
ApplyOperatingSystem 3/27/2013 3:05:23 PM
1828 (0x0724)
Retrying download... ApplyOperatingSystem
3/27/2013 3:05:23 PM 1828 (0x0724)
GetDirectoryListing() entered ApplyOperatingSystem
3/27/2013 3:05:26 PM 1828 (0x0724)
Initializing HTTP transport. ApplyOperatingSystem
3/27/2013 3:05:26 PM 1828 (0x0724)
Setting URL = http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/BHN00018.
ApplyOperatingSystem 3/27/2013 3:05:26 PM
1828 (0x0724)
Address=http://PRBAHVSSCCM.ARABBANKING.LOCAL, Scheme=http, Object=/SMS_DP_SMSPKG$/BHN00018, Port=80.
ApplyOperatingSystem 3/27/2013 3:05:26 PM
1828 (0x0724)
Setting Authenticator. ApplyOperatingSystem
3/27/2013 3:05:26 PM 1828 (0x0724)
Set authenticator in transport ApplyOperatingSystem
3/27/2013 3:05:26 PM 1828 (0x0724)
WinHttp credentials set ApplyOperatingSystem
3/27/2013 3:05:26 PM 1828 (0x0724)
CLibSMSMessageWinHttpTransport::Send: URL: PRBAHVSSCCM.ARABBANKING.LOCAL:80 PROPFIND /SMS_DP_SMSPKG$/BHN00018
ApplyOperatingSystem 3/27/2013 3:05:26 PM
1828 (0x0724)
401 - Authentication failure on request with anonymous access, retrying with context credentials.
ApplyOperatingSystem 3/27/2013 3:05:26 PM
1828 (0x0724)
Using thread token for request ApplyOperatingSystem
3/27/2013 3:05:26 PM 1828 (0x0724)
401 - Authentication failure on request with context credentials, retrying with supplied credentials.
ApplyOperatingSystem 3/27/2013 3:05:26 PM
1828 (0x0724)
Request was succesful. ApplyOperatingSystem
3/27/2013 3:05:26 PM 1828 (0x0724)
DAV response string is:
<?xml version="1.0" encoding="utf-8" ?><D:multistatus xmlns:D="DAV:"><D:response><D:href>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/sccm?/BHN00018/</D:href><D:propstat><D:status>HTTP/1.1
200 OK</D:status><D:prop><D:getcontenttype/><D:supportedlock/><D:getetag/><D:creationdate/><D:iscollection>1</D:iscollection><D:resourcetype><D:collection/></D:resourcetype><D:ishidden>0</D:ishidden><D:displayname>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/sccm?/BHN00018/</D:displayname><D:getlastmodified></D:getlastmodified><D:getcontentlanguage/><D:getcontentlength>0</D:getcontentlength></D:prop></D:propstat></D:response><D:response><D:href>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim</D:href><D:propstat><D:status>HTTP/1.1
200 OK</D:status><D:prop><D:getcontenttype/><D:lockdiscovery/><D:supportedlock/><D:getetag/><D:getcontentlanguage/><D:iscollection>0</D:iscollection><D:creationdate/><D:resourcetype/><D:ishidden>0</D:ishidden><D:displayname>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim</D:displayname><D:getlastmodified>Thu,
21 Mar 2013 09:21:33 GMT</D:getlastmodified><D:getcontentlength>4984262577</D:getcontentlength></D:prop></D:propstat></D:response></D:multistatus>
ApplyOperatingSystem 3/27/2013 3:05:26 PM
1828 (0x0724)
List of files to be downloaded ApplyOperatingSystem
3/27/2013 3:05:26 PM 1828 (0x0724)
File: http://PRBAHVSSCCM.ARABBANKING.LOCAL:80/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim
ApplyOperatingSystem 3/27/2013 3:05:26 PM
1828 (0x0724)
GetDirectoryListing() successfully completed
ApplyOperatingSystem 3/27/2013 3:05:26 PM
1828 (0x0724)
dwStatusCode >= 200 && dwStatusCode <= 299, HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,1304)
ApplyOperatingSystem 3/27/2013 3:05:26 PM
1828 (0x0724)
WinHttpQueryHeaders() returns status code 500 (Internal Server Error)
ApplyOperatingSystem 3/27/2013 3:05:26 PM
1828 (0x0724)
SendWinHttpRequest failed. 801901f4. ApplyOperatingSystem
3/27/2013 3:05:26 PM 1828 (0x0724)
SendWinHttpRequest (hSession, hConnect, hRequest, sRequest.c_str(), 0, bUseSSL, ullFileSize, LastGoodCredentialsType), HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,1542)
ApplyOperatingSystem 3/27/2013 3:05:26 PM
1828 (0x0724)
DownloadFile failed. 801901f4. ApplyOperatingSystem
3/27/2013 3:05:26 PM 1828 (0x0724)
DownloadFile (hSession, hConnect, sSourceFile.c_str(), sDestinationFile.c_str(), ulTotalSizeRequired, ulDownLoaded, LastGoodCredentialsType, bUseSSL), HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,1648)
ApplyOperatingSystem 3/27/2013 3:05:26 PM
1828 (0x0724)
Error downloading file from http://PRBAHVSSCCM.ARABBANKING.LOCAL:80/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim to C:\_SMSTaskSequence\Packages\BHN00018\Win7-x86-BasicApps.wim
ApplyOperatingSystem
3/27/2013 3:05:26 PM 1828 (0x0724)
DownloadFiles failed. 801901f4. ApplyOperatingSystem
3/27/2013 3:05:26 PM 1828 (0x0724)
DownloadFiles (setDirs, setFiles, sDestination.c_str(), bUseSSL), HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,2523)
ApplyOperatingSystem 3/27/2013 3:05:26 PM
1828 (0x0724)
Retrying download... ApplyOperatingSystem
3/27/2013 3:05:26 PM 1828 (0x0724)
Tried all the available http based locations. SMB based locations will be attempted now.
ApplyOperatingSystem 3/27/2013 3:05:29 PM
1828 (0x0724)
!saSMBContentSources.empty(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,2948)
ApplyOperatingSystem 3/27/2013 3:05:29 PM
1828 (0x0724)
DownloadContentAndVerifyHash(pszPackageID, L"SMSPackage", saHttpContentSources, saSMBContentSources, saMulticastContentSources, sDestination, dwFlags, L"", 0, dwPackageFlags, pszUserName, pszUserPassword ), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3106)
ApplyOperatingSystem 3/27/2013 3:05:29 PM
1828 (0x0724)
DownloadContentLocally(pszSource, sSourceDirectory, dwFlags, hUserToken, pszUserName, pszUserPassword), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3331)
ApplyOperatingSystem 3/27/2013 3:05:29 PM
1828 (0x0724)
ResolveSource(pszSource, sSourceDirectory, dwFlags, 0, 0, 0), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3221)
ApplyOperatingSystem 3/27/2013 3:05:29 PM
1828 (0x0724)
TS::Utility::ResolveSource( this->packageID, this->packagePath ), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,1483)
ApplyOperatingSystem 3/27/2013 3:05:29 PM
1828 (0x0724)
resolvePkgSource(), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,1503)
ApplyOperatingSystem 3/27/2013 3:05:29 PM
1828 (0x0724)
Apply(), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,1712)
ApplyOperatingSystem 3/27/2013 3:05:29 PM
1828 (0x0724)
Installation of image 1 in package BHN00018 failed to complete..
The system cannot find the file specified. (Error: 80070002; Source: Windows)
ApplyOperatingSystem 3/27/2013 3:05:29 PM
1828 (0x0724)
installer.install(), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,1787)
ApplyOperatingSystem 3/27/2013 3:05:29 PM
1828 (0x0724)
Entering ReleaseSource() for C:\_SMSTaskSequence\Packages\BHN00018
ApplyOperatingSystem 3/27/2013 3:05:29 PM
1828 (0x0724)
The user tries to release a source directory C:\_SMSTaskSequence\Packages\BHN00018 that is either already released or we have not connected to it
ApplyOperatingSystem 3/27/2013 3:05:29 PM
1828 (0x0724)
InstallImage( g_InstallPackageID, g_ImageIndex, targetVolume, ImageType_Data, g_ConfigPackageID, g_ConfigFileName, false, g_RunFromNet ), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\applyos.cpp,522)
ApplyOperatingSystem 3/27/2013 3:05:29 PM
1828 (0x0724)
Process completed with exit code 2147942402
TSManager 3/27/2013 3:05:29 PM
1456 (0x05B0)
TSManager 3/27/2013 3:05:29 PM
1456 (0x05B0)
Failed to run the action: Apply Data Image 1.
The system cannot find the file specified. (Error: 80070002; Source: Windows)
TSManager 3/27/2013 3:05:29 PM
1456 (0x05B0)
MP server http://PRBAHVSSCCM.ARABBANKING.LOCAL. Ports 80,443. CRL=false.
TSManager 3/27/2013 3:05:29 PM
1456 (0x05B0)
Setting authenticator TSManager
3/27/2013 3:05:29 PM 1456 (0x05B0)
Set authenticator in transport TSManager
3/27/2013 3:05:29 PM 1456 (0x05B0)
Sending StatusMessage TSManager
3/27/2013 3:05:29 PM 1456 (0x05B0)
Setting message signatures. TSManager
3/27/2013 3:05:29 PM 1456 (0x05B0)
Setting the authenticator. TSManager
3/27/2013 3:05:29 PM 1456 (0x05B0)
CLibSMSMessageWinHttpTransport::Send: URL: PRBAHVSSCCM.ARABBANKING.LOCAL:80 CCM_POST /ccm_system/request
TSManager 3/27/2013 3:05:29 PM
1456 (0x05B0)
Request was succesful. TSManager
3/27/2013 3:05:29 PM 1456 (0x05B0)
Set a global environment variable _SMSTSLastActionRetCode=-2147024894
TSManager 3/27/2013 3:05:29 PM
1456 (0x05B0)
Set a global environment variable _SMSTSLastActionSucceeded=false
TSManager 3/27/2013 3:05:29 PM
1456 (0x05B0)
Clear local default environment TSManager
3/27/2013 3:05:29 PM 1456 (0x05B0)
Let the parent group (Install Operating System) decides whether to continue execution
TSManager 3/27/2013 3:05:29 PM
1456 (0x05B0)
The execution of the group (Install Operating System) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
TSManager 3/27/2013 3:05:29 PM
1456 (0x05B0)
Failed to run the last action: Apply Data Image 1. Execution of task sequence failed.
The system cannot find the file specified. (Error: 80070002; Source: Windows)
TSManager 3/27/2013 3:05:29 PM
1456 (0x05B0)
MP server http://PRBAHVSSCCM.ARABBANKING.LOCAL. Ports 80,443. CRL=false.
TSManager 3/27/2013 3:05:29 PM
1456 (0x05B0)
and when trying to open location from IIS of the http://localhost:80/SMS_DP_SMSPKG$
i got the following error
I don't know it is related or not, do you have any idea about that

This post may be of some help..
http://social.technet.microsoft.com/Forums/en-US/configmanagerdeployment/thread/baa2d7e0-599d-4bd0-a375-8905a7d0b2ff/
Delphin

OSD Task Sequence fails with "There are no task sequences available for this computer"

Let me preface this by saying that I have read at least 100 forum posts with people having similar issues. However, none of the solutions in those
posts have worked for me.
The Problem: SCCM 2012 R2 will not image unknown computers.
The task sequence gives the error "There are no task sequences available for this computer." As soon as that error occurs, SCCM places an Unknown entry into the All Systems collection. I have been imaging unknown computers, without fail, for
4 months and no environmental changes have been made. NOTE: I am using USB media, not PXE.
What I've Tried:
Checked for duplicate SMSBIOS GUIDS in the console, none.
Checked for duplicate MAC Addresses in the console, none.
Checked for expired certificates, none.
Recreated Boot Media, twice.
Deleted the Unknown entry and retried, SCCM just recreates the Unknown entry.
Deleted all of my task sequence deployments, and then redeployed them each to All Systems (Only Boot Media and PXE) and to Unknown Systems (Only Boot Media and PXE)
I have also ran the following in the SQL Server Management Studio;
SELECT
* FROM
ResPolicyMap WHERE
machineid = 0 and
PADBID IN
(SELECT
PADBID FROM PolicyAssignment
WHERE BodyHash
IS NULL)
No result
Select
* From
vMacAddresses Where
MacAddresses = '00:00:00:00:00:00'
This displays an entry for every time that I have tried to image the unknown machine attached to the MAC Address with a different ItemKey and SMS_Unique_Identifier for each entry.
Added the machine manually using Import Computer Information, immediately recognized the Task Sequences that I have advertised to the All Systems collection.
Any and all assistance is welcome, I am going on the third straight day of dead ends. Below I have tried my best to post the entire SMSTS Log;

LOGGING: Finalize process ID set to 744
==============================[ TSBootShell.exe ]==============================
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Debug shell is enabled
Waiting for PNP initialization...
RAM Disk Boot Path: MULTI(0)DISK(0)RDISK(0)PARTITION(1)\SOURCES\BOOT.WIM
WinPE boot path: C:\SOURCES\BOOT.WIM
Booted from removable device
Found config path C:\
Booting from removable media, not restoring bootloaders on hard drive
C:\WinPE does not exist.
C:\_SmsTsWinPE\WinPE does not exist.
Executing command line: wpeinit.exe -winpe
The command completed successfully.
Starting DNS client service.
Executing command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
The command completed successfully.
==============================[ TSMBootStrap.exe ]==============================
Command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Succeeded loading resource DLL 'X:\sms\bin\x64\TSRESNLC.DLL'
Current OS version is 6.2.9200.0
Adding SMS bin folder "X:\sms\bin\x64" to the system environment PATH
Failed to open PXE registry key. Not a PXE boot.
Media Root = C:\
WinPE boot type: 'Ramdisk:SourceIdentified'
Failed to find the source drive where WinPE was booted from
Executing from Media in WinPE
Verifying Media Layout.
MediaType = BootMedia
PasswordRequired = false
Found network adapter "Intel(R) Ethernet Connection I217-LM" with IP Address XXX.XX.XXX.XXX.
Running Wizard in Interactive mode
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Activating Welcome Page.
Loading bitmap
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Spawned thread 1008 to download policy.
Entering TSMediaWizardControl::GetPolicy.
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00'
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00'
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}
Setting LogMaxSize to 1000000
Setting LogMaxHistory to 1
Setting LogLevel to 0
Setting LogEnabled to 1
Setting LogDebug to 1
UEFI: false
Loading variables from the Task Sequencing Removable Media.
Loading Media Variables from "C:\sms\data\variables.dat"
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Setting SMSTSMP TS environment variable
Setting _SMSMediaGuid TS environment variable
Setting _SMSTSBootMediaPackageID TS environment variable
Setting _SMSTSBootMediaSourceVersion TS environment variable
Setting _SMSTSBrandingTitle TS environment variable
Setting _SMSTSCertSelection TS environment variable
Setting _SMSTSCertStoreName TS environment variable
Setting _SMSTSDiskLabel1 TS environment variable
Setting _SMSTSHTTPPort TS environment variable
Setting _SMSTSHTTPSPort TS environment variable
Setting _SMSTSIISSSLState TS environment variable
Setting _SMSTSMediaCreatedOnCAS TS environment variable
Setting _SMSTSMediaPFX TS environment variable
Setting _SMSTSMediaSetID TS environment variable
Setting _SMSTSMediaType TS environment variable
Setting _SMSTSPublicRootKey TS environment variable
Setting _SMSTSRootCACerts TS environment variable
Setting _SMSTSSiteCode TS environment variable
Setting _SMSTSSiteSigningCertificate TS environment variable
Setting _SMSTSStandAloneMedia TS environment variable
Setting _SMSTSSupportUnknownMachines TS environment variable
Setting _SMSTSTimezone TS environment variable
Setting _SMSTSUseFirstCert TS environment variable
Setting _SMSTSx64UnknownMachineGUID TS environment variable
Setting _SMSTSx86UnknownMachineGUID TS environment variable
Root CA Public Certs=
Missing root CA environment variable from variables file
Support Unknown Machines: 1
Custom hook from X:\\TSConfig.INI is
No hook is found to be executed before downloading policy
Authenticator from the environment is empty.
Need to create Authenticator Info using PFX
Initialized CStringStream object with string: 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A;2014-07-16T18:15:39Z.
Set media certificate in transport
Set authenticator in transport
CLibSMSMessageWinHttpTransport::Send: URL: XXXXXXXXX.XXXXXX.com:80 GET /SMS_MP/.sms_aut?MPKEYINFORMATIONMEDIA
Request was successful.
Default CSP is Microsoft Enhanced RSA and AES Cryptographic Provider
Default CSP Type is 24
New settings:
site=XXX,XXX, MP=http://XXXX.XXXX.com, ports: http=80,https=443
certificates are received from MP.
Unknown machine GUIDs: 774b17a2-6eeb-44bc-9c94-ce9081f5fe4c 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
MP specific X86 unknown machine GUID is received at run time
MP specific X64 unknown machine GUID is received at run time
Getting MP time information
Set authenticator in transport
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 406, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Current time: 2014-07-16 18:15:39.787 TZ:Pacific Standard Time Bias:0480
Current time zone info: 480, Pacific Standard Time, [0 0 0 0 0 0 0 0], 0, , [0 0 0 0 0 0 0 0], 0
Adjusting the system time: -14400.551 seconds
Time zone info set to: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
New time: 2014-07-16 14:15:39.235
Current time: 2014-07-16 14:15:39.231 TZ: Bias:0300
Downloading policy from http://XXXX.XXXX.com.
Initializing HTTP transport.
Setting URL = http://XXXX.XXXX.com.
Setting Ports = 80,443.
Setting CRL = false.
Setting Server Certificates.
Set authenticator in transport
Setting Media Certificate.
Preparing Client Identity Request.
Setting transport.
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Setting site code = XXX.
Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go.
Setting SMBIOS GUID = XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.
Adding MAC Address XX:XX:XX:XX:XX:XX.
Executing Client Identity Request.
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 415, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Client GUID = , Netbios name = , State = Known
Using unknown machine GUID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=TRUE
Hash computed from CSP: Microsoft Enhanced RSA and AES Cryptographic Provider, AlgID: 32772, HashSize: 20
Computed HardwareID=2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Hardware ID: 2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Preparing the Client DDR Message
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Sending the Client DDR message.
Sending Report
<Report><ReportHeader><Identification><Machine><ClientInstalled>0</ClientInstalled><ClientType>1</ClientType><Unknown>1</Unknown><ClientID>GUID:26717327-194f-4cd6-90ba-309998c058f2</ClientID><ClientVersion>5.00.0000.0000</ClientVersion><NetBIOSName>Unknown</NetBIOSName><CodePage>437</CodePage><SystemDefaultLCID>1033</SystemDefaultLCID></Machine></Identification><ReportDetails><ReportContent>Inventory
Data</ReportContent><ReportType>Full</ReportType><Date>20140716141539.000000+000</Date><Version>1.0</Version><Format>1.1</Format></ReportDetails><InventoryAction ActionType="Predefined"><InventoryActionID>{00000000-0000-0000-0000-000000000003}</InventoryActionID><Description>Discovery</Description><InventoryAc
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
Submitted new client identity: GUID:26717327-194f-4cd6-90ba-309998c058f2
Preparing Policy Assignment Request.
Setting transport.
Setting site code = XXX.
Setting client ID = 74f16942-dd75-437f-8c4b-2a5de4d0e5e5.
Setting site signing Certificate.
Setting SiteSigningCertificateContext
Executing Policy Assignment Request.
Sending RequestAssignments
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 274, uncompressed size 662.
Request client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Response client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Retrieving Policy Assignments:
Successfully read 0 policy assignments.
Retrieving collection variable policy.
Found 0 collection variables.
Retrieving machine variable policy.
Found 0 machine variables.
Setting collection variables in the task sequencing environment.
Setting machine variables in the task sequencing environment.
Exiting TSMediaWizardControl::GetPolicy.
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
No assigned task sequence.
Setting wizard error: There are no task sequences available for this computer.
Skipping Confirmation Page.
Skipping Task Sequence Selection Page.
Skipping Variables Selection Page.
Skipping Resolve Progress Page.
Activating Finish Page.
Loading bitmap
Executing command line: X:\windows\system32\cmd.exe /k
The command completed successfully.
Successfully launched command shell.

SCCM 2012 OSD Task Sequence Fails "An error occurred while retrieving policy for this computer"

We have SCCM 2012 R2. I amm trying to start OSD task sequence from bootable media.
Hyper-v client gets DHCP ip and starts MDT bootable media, but could not find policy.
From F8 I can ping SCCM/DP/MP server.
What could be the cause?

Yes, this DHCP client is in the same subnet as other working clients.
smsts.log from client
Request was successful. TSPxe
21.03.2014 14:14:14 324 (0x0144)
pNext != NULL, HRESULT=80004005 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,1970)
TSPxe 21.03.2014 14:14:14
324 (0x0144)
reply has no message header marker TSPxe
21.03.2014 14:14:14 324 (0x0144)
DoRequest (sReply, true), HRESULT=80004005 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,5868)
TSPxe 21.03.2014 14:14:14
324 (0x0144)
Failed to get client identity (80004005)
TSPxe 21.03.2014 14:14:14
324 (0x0144)
ClientIdentity.RequestClientIdentity (), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,1113)
TSPxe 21.03.2014 14:14:14
324 (0x0144)
failed to request for client
TSPxe 21.03.2014 14:14:14
324 (0x0144)
Exiting TSMediaWizardControl::GetPolicy. TSPxe
21.03.2014 14:14:14 324 (0x0144)

OSD Task Sequence fails to install SCCM client

Hello,
Our OSD task sequence fails to install the SCCM client with certain images.
The TS gets to the "Setup Windows and Configuration" step, during which it downloads all the necessary SCCM client files (silverlight, C++ redistributable, client.msi....etc.). At this point computer restarts and in never loads back into the
task sequence, instead it enters the minisetup (setup is starting services, setup is installing devices, setup is applying system settings...preparing computer for first use), after which the computer restarts and you are back at the CTR+ALT+Del screen.
The computer has joined the domain and has run all other steps but it has failed to install SCCM client. I can also see the leftovers of an incomplete TS under c:\_SMSTaskSequence
If we change the image specified under "Apply Operating System" step, everything works ok.
It appears there is something wrong with this particular image. Any ideas?
Logs show no errors. Let me know which logs you'd like me to post (and from which location)
There is no ccm folder under c:\windows

Hoping you are using ConfigMgr 2012 R2. If a client machine Join to Domain and doesn't proceed with other steps and not installing the CCM client, then problem seems to be with the Image.Do you have any RunOnce registry setting specified in the Image? You
can mount the Image and check those settings.
RunOnce Key Reference :
https://msdn.microsoft.com/en-us/library/windows/desktop/aa376977(v=vs.85).aspx
If the above key is present in the Image, TS Engine won't resume after the reboot.
You need to use a new variable "SMSTSPostAction" at the end of the Task Sequence, to add your custom actions.
The above variable is applicable in CM 2012 SP1 and R2.
Thanks, Senthil. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. Click on "vote as Helpful" if you feel this post helpful to you. This
can be beneficial to other community members reading the thread.

SCOM 2012 SP1 "Task invocation failed with error code -2146232576"

Hi,
I`m trying to discover a Linux RHEL 5.9 Server which is in another untrusted domain and from the Discovery wizard I receive the following error:
Task invocation failed with error code -2146232576. Error message was 0x80131700.
Any ideas ?
Greetings.

Hi,
@Simon, I restart the SCOM services and I also verify the UAC and it's disabled.
@Mai Ali, thank you for you reply. I don't have a "&" symbol in my password, but only a "$" ..I hope it's fine.
If the SCOM discovery doesn't work, I installed the agent manually on the Linux server.
BTW I also use a "monuser" account configured using this procedure:
http://social.technet.microsoft.com/wiki/contents/articles/7375.configuring-sudo-elevation-for-unix-and-linux-monitoring-with-system-center-2012-operations-manager.aspx
I also verify the ports 22 and 5723 and are opened, but I also noticed that if you restart the scxadmin, is listening on HTTPS on port 1207.
Now..if I try to re-discover the Linux server from SCOM, I receive the following error:
"The pool managing the instance is not available or the location monitoring object cannot be found"
Regards.

New DP on winsrv2012r2 - TS failing with error 0x80091007

Hi All,
I need your advice about a really weird issue. We replaced a 2008r2 file server which was also a DP in one of our remote sites it was working well. The new server is on 2012r2 and I reinstalled the DP on it. I need to precise that all of them are are
hosted on VMware 5.1 (esxi-vsphere). I distributed all the needed packages on this newly created dp and tried to setup a vm to test the task sequence and I noted that the win download was very very quick (3-4mins for a quite big wim
file 24gb). in my tests all attempts failed at the end of TS when applying system image with the error code 0x80091007. I need to precise that I choose the E1000 Nic in VMware and 4gb of memory so normally there should not be any issue. I tried also
with a vmxnet3 nic but it wasn't detected at the beginning of TS even if my boot image contains the VMware drivers ..(that's one of the weird point) . But the weirdest point is that I asked one of my colleague to give it a try and at his first attempt he was
successful using exactly the same vm I tried to setup ... but all is other attempts failed afterwards. Do you know what could be the cause ? Could it be linked to the fact that the dp was setup on 2012r2 when the primary site and all others sccm
servers are on 2008r2. Also our forest functional level is still on 2003 so am wondering if that could be the explanation.
Here are all the logs (failed and success one ) which were all from the same dp on 2012r2:http://www27.zippyshare.com/v/83975219/file.html
So after trying all ideas (Redistributing the images on the dp.. validating them... even recreated the dp completely I decided to setup a dedicated server on 2008r2 and it worked at first imaging attempt but I would like to understand what was the cause
if possible that's why I would like to get your advice on that. thx in advance. best regards.

Hi,
There error translates to "The hash value is not correct."
Have you seen this post on the topic.
https://social.technet.microsoft.com/Forums/en-US/77783490-82a9-4dd1-9ea8-ca11c37f3ee6/sccm-2012-osd-task-sequence-error-0x80091007?forum=configmanagerosd
Solving the vmxnet3 nic sounds like a neeeded solition.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Post Upgrade to R2: Task Sequence Fails with 0x80070057

one SCCM 2012 server for a while now (June/July of 2013) and have had no issues with OSD's and software deployments. Today I decided to upgrade to R2 from CU3 and I thought the upgrade process went really well. But after the upgrade
I attempted to perform an OSD & it failed with error 0x80070057 before the Task Sequence selection.
I had that problem ages ago when I first started using SCCM, but that was due to a missing boundary group. I got that straightened out in June/July of 2013 and, OSD's & software deployments have been working fine since.
All the boundary groups are still defined
All the boundaries are still defined
The specific boundary this machine is in has a site system defined
The specific boundary group this machine is in has both an assigned site as well as a site system server defined
Verified server has full control over System Management
Verified server has been published in AD
Relevant section of %temp%\smsts\smsts.log in boot environment
Root CA Public Certs= TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
Missing root CA environment variable from variables file TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
Support Unknown Machines: 1 TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
Custom hook from X:\\TSConfig.INI is TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
No hook is found to be executed before downloading policy TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
Authenticator from the environment is empty. TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
Need to create Authenticator Info using PFX TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
Initialized CStringStream object with string: 171D4480-4E88-4DA5-B047-C4DC4E8EF947;2014-03-11T00:55:46Z. TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
Using user-defined MP locations: http://SCCMSERVER.F.Q.D.N TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
Set authenticator in transport TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
Set media certificates in transport TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
IP: 10.1.18.11 10.1.18.0 TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
CLibSMSMessageWinHttpTransport::Send: URL: SCCMSERVER.F.Q.D.N:80 GET /SMS_MP/.sms_aut?MPLOCATION&ir=10.1.18.11&ip=10.1.18.0 TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
Error. Status code 500 returned TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
isSuccessful, HRESULT=80004005 (e:\qfe\nts\sms\framework\osdmessaging\libsmsmessaging.cpp,5581) TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
CCM::SMSMessaging::CLibSMSMPLocation::RequestMPLocation failed; 0x80004005 TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
MPLocation.RequestMPLocation (szTrustedRootKey, sIPSubnets.c_str(), sIPAddresses.c_str(), sSiteCode, sAssignedSiteCode, sMP, sMPCertificates, sX86UnknownMachineGUID, sX64UnknownMachineGUID), HRESULT=80004005 (e:\qfe\nts\sms\framework\osdmessaging\libsmsmessaging.cpp,9583) TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
CCM::SMSMessaging::GetMPLocation failed; 0x80004005 TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
Failed to query http://SCCMSERVER.F.Q.D.N for MP location TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
New settings: TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
site=,, MP=, ports: http=80,https=443 TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
Set authenticator in transport TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
pszSiteCode && pszSiteCode[0], HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\tspolicy.cpp,580) TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
TS::Policy::GetClientIdentity (&httpTransport, sSiteCode.c_str(), sMediaGuid.c_str(), sClientGUID, sNetbiosName, bUnknown, sServerName, sServerRemoteName, sImportedClientIdentity), HRESULT=80070057 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,965) TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
Exiting TSMediaWizardControl::GetPolicy. TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
pWelcomePage->m_pTSMediaWizardControl->GetPolicy(), HRESULT=80070057 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawelcomepage.cpp,303) TSMBootstrap 3/10/2014 4:55:46 PM 1124 (0x0464)
Setting wizard error: An error occurred while retrieving policy for this computer (0x80070057). For more information, contact your system administrator or helpdesk operator. TSMBootstrap 3/10/2014 4:55:46 PM 1112 (0x0458)
WelcomePage::OnWizardNext() TSMBootstrap 3/10/2014 4:55:46 PM 1112 (0x0458)
Skipping Confirmation Page. TSMBootstrap 3/10/2014 4:55:46 PM 1112 (0x0458)
Skipping Task Sequence Selection Page. TSMBootstrap 3/10/2014 4:55:46 PM 1112 (0x0458)
Skipping Variables Selection Page. TSMBootstrap 3/10/2014 4:55:46 PM 1112 (0x0458)
Skipping Resolve Progress Page. TSMBootstrap 3/10/2014 4:55:46 PM 1112 (0x0458)
Activating Finish Page. TSMBootstrap 3/10/2014 4:55:46 PM 1112 (0x0458)
Loading bitmap TSMBootstrap 3/10/2014 4:55:46 PM 1112 (0x0458)
Executing command line: X:\windows\system32\cmd.exe /k TSBootShell 3/10/2014 4:55:59 PM 840 (0x0348)
The command completed successfully. TSBootShell 3/10/2014 4:55:59 PM 840 (0x0348)
<![LOG[Root CA Public Certs=]LOG]!><time="16:55:46.225+480" date="03-10-2014" component="TSMBootstrap" context="" type="1" thread="1124" file="tsmediawizardcontrol.cpp:615">
<![LOG[Missing root CA environment variable from variables file]LOG]!><time="16:55:46.225+480" date="03-10-2014" component="TSMBootstrap" context="" type="1" thread="1124" file="tsmediawizardcontrol.cpp:621">
<![LOG[Support Unknown Machines: 1]LOG]!><time="16:55:46.225+480" date="03-10-2014" component="TSMBootstrap" context="" type="1" thread="1124" file="tsmediawizardcontrol.cpp:632">
<![LOG[Custom hook from X:\\TSConfig.INI is ]LOG]!><time="16:55:46.225+480" date="03-10-2014" component="TSMBootstrap" context="" type="1" thread="1124" file="tsmediawizardcontrol.cpp:675">
<![LOG[No hook is found to be executed before downloading policy]LOG]!><time="16:55:46.225+480" date="03-10-2014" component="TSMBootstrap" context="" type="1" thread="1124" file="tsmediawizardcontrol.cpp:699">
<![LOG[Authenticator from the environment is empty.]LOG]!><time="16:55:46.240+480" date="03-10-2014" component="TSMBootstrap" context="" type="1" thread="1124" file="tsmediawizardcontrol.cpp:838">
<![LOG[Need to create Authenticator Info using PFX]LOG]!><time="16:55:46.240+480" date="03-10-2014" component="TSMBootstrap" context="" type="1" thread="1124" file="tsmediawizardcontrol.cpp:850">
<![LOG[Initialized CStringStream object with string: 171D4480-4E88-4DA5-B047-C4DC4E8EF947;2014-03-11T00:55:46Z.]LOG]!><time="16:55:46.256+480" date="03-10-2014" component="TSMBootstrap" context="" type="0" thread="1124" file="stringstream.cpp:101">
<![LOG[Using user-defined MP locations: http://SCCMSERVER.F.Q.D.N]LOG]!><time="16:55:46.256+480" date="03-10-2014" component="TSMBootstrap" context="" type="1" thread="1124" file="tsmediawizardcontrol.cpp:911">
<![LOG[Set authenticator in transport]LOG]!><time="16:55:46.256+480" date="03-10-2014" component="TSMBootstrap" context="" type="0" thread="1124" file="libsmsmessaging.cpp:7751">
<![LOG[Set media certificates in transport]LOG]!><time="16:55:46.271+480" date="03-10-2014" component="TSMBootstrap" context="" type="1" thread="1124" file="libsmsmessaging.cpp:9558">
<![LOG[IP: 10.1.18.11 10.1.18.0]LOG]!><time="16:55:46.271+480" date="03-10-2014" component="TSMBootstrap" context="" type="1" thread="1124" file="libsmsmessaging.cpp:9579">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: SCCMSERVER.F.Q.D.N:80 GET /SMS_MP/.sms_aut?MPLOCATION&ir=10.1.18.11&ip=10.1.18.0]LOG]!><time="16:55:46.287+480" date="03-10-2014" component="TSMBootstrap" context="" type="1" thread="1124" file="libsmsmessaging.cpp:8621">
<![LOG[Error. Status code 500 returned]LOG]!><time="16:55:46.349+480" date="03-10-2014" component="TSMBootstrap" context="" type="0" thread="1124" file="libsmsmessaging.cpp:8984">
<![LOG[isSuccessful, HRESULT=80004005 (e:\qfe\nts\sms\framework\osdmessaging\libsmsmessaging.cpp,5581)]LOG]!><time="16:55:46.365+480" date="03-10-2014" component="TSMBootstrap" context="" type="0" thread="1124" file="libsmsmessaging.cpp:5581">
<![LOG[CCM::SMSMessaging::CLibSMSMPLocation::RequestMPLocation failed; 0x80004005]LOG]!><time="16:55:46.365+480" date="03-10-2014" component="TSMBootstrap" context="" type="3" thread="1124" file="libsmsmessaging.cpp:5688">
<![LOG[MPLocation.RequestMPLocation (szTrustedRootKey, sIPSubnets.c_str(), sIPAddresses.c_str(), sSiteCode, sAssignedSiteCode, sMP, sMPCertificates, sX86UnknownMachineGUID, sX64UnknownMachineGUID), HRESULT=80004005 (e:\qfe\nts\sms\framework\osdmessaging\libsmsmessaging.cpp,9583)]LOG]!><time="16:55:46.365+480" date="03-10-2014" component="TSMBootstrap" context="" type="0" thread="1124" file="libsmsmessaging.cpp:9583">
<![LOG[CCM::SMSMessaging::GetMPLocation failed; 0x80004005]LOG]!><time="16:55:46.365+480" date="03-10-2014" component="TSMBootstrap" context="" type="3" thread="1124" file="libsmsmessaging.cpp:9587">
<![LOG[Failed to query http://SCCMSERVER.F.Q.D.N for MP location]LOG]!><time="16:55:46.365+480" date="03-10-2014" component="TSMBootstrap" context="" type="3" thread="1124" file="tsmbootstraputil.cpp:1544">
<![LOG[New settings:]LOG]!><time="16:55:46.365+480" date="03-10-2014" component="TSMBootstrap" context="" type="1" thread="1124" file="tsmediawizardcontrol.cpp:925">
<![LOG[ site=,, MP=, ports: http=80,https=443]LOG]!><time="16:55:46.365+480" date="03-10-2014" component="TSMBootstrap" context="" type="1" thread="1124" file="tsmediawizardcontrol.cpp:927">
<![LOG[Set authenticator in transport]LOG]!><time="16:55:46.365+480" date="03-10-2014" component="TSMBootstrap" context="" type="0" thread="1124" file="libsmsmessaging.cpp:7751">
<![LOG[pszSiteCode && pszSiteCode[0], HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\tspolicy.cpp,580)]LOG]!><time="16:55:46.381+480" date="03-10-2014" component="TSMBootstrap" context="" type="0" thread="1124" file="tspolicy.cpp:580">
<![LOG[TS::Policy::GetClientIdentity (&httpTransport, sSiteCode.c_str(), sMediaGuid.c_str(), sClientGUID, sNetbiosName, bUnknown, sServerName, sServerRemoteName, sImportedClientIdentity), HRESULT=80070057 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,965)]LOG]!><time="16:55:46.381+480" date="03-10-2014" component="TSMBootstrap" context="" type="0" thread="1124" file="tsmediawizardcontrol.cpp:965">
<![LOG[Exiting TSMediaWizardControl::GetPolicy.]LOG]!><time="16:55:46.381+480" date="03-10-2014" component="TSMBootstrap" context="" type="0" thread="1124" file="tsmediawizardcontrol.cpp:1378">
<![LOG[pWelcomePage->m_pTSMediaWizardControl->GetPolicy(), HRESULT=80070057 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawelcomepage.cpp,303)]LOG]!><time="16:55:46.381+480" date="03-10-2014" component="TSMBootstrap" context="" type="0" thread="1124" file="tsmediawelcomepage.cpp:303">
<![LOG[Setting wizard error: An error occurred while retrieving policy for this computer (0x80070057). For more information, contact your system administrator or helpdesk operator.]LOG]!><time="16:55:46.381+480" date="03-10-2014" component="TSMBootstrap" context="" type="0" thread="1112" file="tsmediawizardcontrol.cpp:1547">
<![LOG[WelcomePage::OnWizardNext()]LOG]!><time="16:55:46.381+480" date="03-10-2014" component="TSMBootstrap" context="" type="0" thread="1112" file="tsmediawelcomepage.cpp:340">
<![LOG[Skipping Confirmation Page.]LOG]!><time="16:55:46.381+480" date="03-10-2014" component="TSMBootstrap" context="" type="0" thread="1112" file="tsmediaconfirmationpage.cpp:170">
<![LOG[Skipping Task Sequence Selection Page.]LOG]!><time="16:55:46.396+480" date="03-10-2014" component="TSMBootstrap" context="" type="0" thread="1112" file="tsmediataskselectionpage.cpp:118">
<![LOG[Skipping Variables Selection Page.]LOG]!><time="16:55:46.396+480" date="03-10-2014" component="TSMBootstrap" context="" type="0" thread="1112" file="tsmediavariablesselectionpage.cpp:155">
<![LOG[Skipping Resolve Progress Page.]LOG]!><time="16:55:46.396+480" date="03-10-2014" component="TSMBootstrap" context="" type="0" thread="1112" file="tsmediaresolveprogresspage.cpp:96">
<![LOG[Activating Finish Page.]LOG]!><time="16:55:46.396+480" date="03-10-2014" component="TSMBootstrap" context="" type="0" thread="1112" file="tsmediafinishpage.cpp:107">
<![LOG[Loading bitmap]LOG]!><time="16:55:46.396+480" date="03-10-2014" component="TSMBootstrap" context="" type="1" thread="1112" file="tsmbootstrap.cpp:1228">
<![LOG[Executing command line: X:\windows\system32\cmd.exe /k]LOG]!><time="16:55:59.048+480" date="03-10-2014" component="TSBootShell" context="" type="1" thread="840" file="bootshell.cpp:857">
<![LOG[The command completed successfully.]LOG]!><time="16:55:59.048+480" date="03-10-2014" component="TSBootShell" context="" type="1" thread="840" file="bootshell.cpp:939">
Could this be an IIS problem?

I've had problems after the R2 upgrade and had to reinstall PXE/WDS on Distribution Point to resolve.
Also ensure that you apply this hotfix after R2:
http://www.deploymentresearch.com/Research/tabid/62/EntryId/156/Do-not-do-OSD-in-ConfigMgr-2012-R2-without-this-hotfix.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

PXE OSD Task Sequence fails to run on new laptop

We are trying to run a working PXE OSD task sequence on a new HP laptop. It's a Elitebook 840 G2. We've downloaded the provided driver package & created a new driver package in SCCM. We inserted the driver into the boot image &
updated the DPs. When we PXE boot the laptop it flashes the splash screen & reboots. Other laptops & desktops boot properly. This looks like a driver issue but we wanted to run it past the forum to see if anyone had any other suggestions.
The SMSTS log file is copied below.
LOGGING: Finalize process ID set to 728
TSBootShell
4/23/2015 4:20:40 PM
732 (0x02DC)
==============================[ TSBootShell.exe ]==============================
TSBootShell 4/23/2015 4:20:40 PM
732 (0x02DC)
Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'
TSBootShell 4/23/2015 4:20:40 PM
732 (0x02DC)
Debug shell is enabled TSBootShell
4/23/2015 4:20:40 PM 732 (0x02DC)
Waiting for PNP initialization... TSBootShell
4/23/2015 4:20:40 PM 736 (0x02E0)
RAM Disk Boot Path: NET(0)\SMSIMAGES\ALN00001\BOOT.ALN00001.WIM
TSBootShell 4/23/2015 4:20:40 PM
736 (0x02E0)
Booted from network (PXE) TSBootShell
4/23/2015 4:20:40 PM 736 (0x02E0)
Network(PXE) path: X:\sms\data\ TSBootShell
4/23/2015 4:20:40 PM 736 (0x02E0)
Found config path X:\sms\data\ TSBootShell
4/23/2015 4:20:40 PM 736 (0x02E0)
Booting from removable media, not restoring bootloaders on hard drive
TSBootShell 4/23/2015 4:20:40 PM
736 (0x02E0)
X:\sms\data\WinPE does not exist. TSBootShell
4/23/2015 4:20:40 PM 736 (0x02E0)
X:\_SmsTsWinPE\WinPE does not exist. TSBootShell
4/23/2015 4:20:40 PM 736 (0x02E0)
Executing command line: wpeinit.exe -winpe TSBootShell
4/23/2015 4:20:40 PM 736 (0x02E0)
Executing command line: X:\WINDOWS\system32\cmd.exe /k
TSBootShell 4/23/2015 4:20:40 PM
732 (0x02DC)
The command completed successfully. TSBootShell
4/23/2015 4:20:40 PM 732 (0x02DC)
Successfully launched command shell. TSBootShell
4/23/2015 4:20:40 PM 732 (0x02DC)
Executing command line: X:\WINDOWS\system32\cmd.exe /k
TSBootShell 4/23/2015 4:20:41 PM
732 (0x02DC)
The command completed successfully. TSBootShell
4/23/2015 4:20:41 PM 732 (0x02DC)
Successfully launched command shell. TSBootShell
4/23/2015 4:20:41 PM 732 (0x02DC)
Executing command line: X:\WINDOWS\system32\cmd.exe /k
TSBootShell 4/23/2015 4:20:41 PM
732 (0x02DC)
The command completed successfully. TSBootShell
4/23/2015 4:20:41 PM 732 (0x02DC)
Successfully launched command shell. TSBootShell
4/23/2015 4:20:41 PM 732 (0x02DC)
The command completed successfully. TSBootShell
4/23/2015 4:20:43 PM 736 (0x02E0)
Starting DNS client service. TSBootShell
4/23/2015 4:20:43 PM 736 (0x02E0)
Executing command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\
TSBootShell 4/23/2015 4:20:44 PM
736 (0x02E0)
The command completed successfully. TSBootShell
4/23/2015 4:20:44 PM 736 (0x02E0)
==============================[ TSMBootStrap.exe ]==============================
TSMBootstrap 4/23/2015 4:20:44 PM
1124 (0x0464)
Command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\
TSMBootstrap 4/23/2015 4:20:44 PM
1124 (0x0464)
Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'
TSMBootstrap 4/23/2015 4:20:44 PM
1124 (0x0464)
Succeeded loading resource DLL 'X:\sms\bin\i386\TSRESNLC.DLL'
TSMBootstrap 4/23/2015 4:20:44 PM
1124 (0x0464)
Current OS version is 6.2.9200.0 TSMBootstrap
4/23/2015 4:20:44 PM 1124 (0x0464)
Adding SMS bin folder "X:\sms\bin\i386" to the system environment PATH
TSMBootstrap 4/23/2015 4:20:44 PM
1124 (0x0464)
PXE Boot with Root = X:\ TSMBootstrap
4/23/2015 4:20:44 PM 1124 (0x0464)
Executing from PXE in WinPE TSMBootstrap
4/23/2015 4:20:44 PM 1124 (0x0464)
Loading TsPxe.dll from X:\sms\bin\i386\TsPxe.dll
TSMBootstrap 4/23/2015 4:20:44 PM
1124 (0x0464)
TsPxe.dll loaded TSPxe
4/23/2015 4:20:44 PM 1124 (0x0464)
Device has PXE booted TSPxe
4/23/2015 4:20:44 PM 1124 (0x0464)
Variable Path: \SMSTemp\2015.04.22.16.21.10.0001.{8EBA05A2-1AB7-4CBB-9DDD-497DFE8E5E07}.boot.var
TSPxe 4/23/2015 4:20:44 PM
1124 (0x0464)
Succesfully added firewall rule for Tftp TSPxe
4/23/2015 4:20:44 PM 1124 (0x0464)
Executing: X:\sms\bin\i386\smstftp.exe -i 172.20.100.51 get \SMSTemp\2015.04.22.16.21.10.0001.{8EBA05A2-1AB7-4CBB-9DDD-497DFE8E5E07}.boot.var X:\sms\data\variables.dat
TSPxe 4/23/2015 4:20:44 PM
1124 (0x0464)
Command line for extension .exe is "%1" %*
TSPxe 4/23/2015 4:20:44 PM
1124 (0x0464)
Set command line: "X:\sms\bin\i386\smstftp.exe" -i 172.20.100.51 get \SMSTemp\2015.04.22.16.21.10.0001.{8EBA05A2-1AB7-4CBB-9DDD-497DFE8E5E07}.boot.var X:\sms\data\variables.dat
TSPxe 4/23/2015 4:20:44 PM
1124 (0x0464)
Executing command line: "X:\sms\bin\i386\smstftp.exe" -i 172.20.100.51 get \SMSTemp\2015.04.22.16.21.10.0001.{8EBA05A2-1AB7-4CBB-9DDD-497DFE8E5E07}.boot.var X:\sms\data\variables.dat
TSPxe 4/23/2015 4:20:44 PM
1124 (0x0464)
Process completed with exit code 1 TSPxe
4/23/2015 4:21:31 PM 1124 (0x0464)
Succesfully removed firewall rule for Tftp TSPxe
4/23/2015 4:21:31 PM 1124 (0x0464)
uExitCode == 0, HRESULT=80004005 (e:\nts_sccm_release\sms\server\pxe\tspxe\tspxe.cpp,185)
TSPxe 4/23/2015 4:21:31 PM
1124 (0x0464)
Failed to download pxe variable file. Code(0x00000001)
TSPxe 4/23/2015 4:21:31 PM
1124 (0x0464)
PxeGetPxeData failed with 0x80004005
TSPxe 4/23/2015 4:21:31 PM
1124 (0x0464)
HRESULT_FROM_WIN32(dwError), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstraputil.cpp,1459)
TSPxe 4/23/2015 4:21:31 PM
1124 (0x0464)
TSMBootstrapUtil::PxeGetPxeData(&bPxeBooted, sVariablesFile, sPxePasswd), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2667)
TSPxe 4/23/2015 4:21:31 PM
1124 (0x0464)
oTSMediaWizardControl.Run( sMediaRoot, true, sTSLaunchMode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1078)
TSPxe 4/23/2015 4:21:31 PM
1124 (0x0464)
Execute( eExecutionEnv, sConfigPath, sTSXMLFile, uBootCount, &uExitCode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1226)
TSPxe 4/23/2015 4:21:31 PM
1124 (0x0464)
Exiting with return code 0x80004005 TSPxe
4/23/2015 4:21:31 PM 1124 (0x0464)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,493)
TSPxe 4/23/2015 4:21:31 PM
1124 (0x0464)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,335)
TSPxe 4/23/2015 4:21:31 PM
1124 (0x0464)
this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,553)
TSPxe 4/23/2015 4:21:31 PM
1124 (0x0464)
Execution complete. TSBootShell
4/23/2015 4:21:31 PM 736 (0x02E0)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,493)
TSBootShell 4/23/2015 4:21:31 PM
736 (0x02E0)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,335)
TSBootShell 4/23/2015 4:21:31 PM
736 (0x02E0)
this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,553)
TSBootShell 4/23/2015 4:21:31 PM
736 (0x02E0)
::RegOpenKeyExW (HKEY_LOCAL_MACHINE, sKey.c_str(), 0, KEY_READ, &hSubKey), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,809)
TSBootShell 4/23/2015 4:21:31 PM
736 (0x02E0)
RegOpenKeyExW is unsuccessful for Software\Microsoft\SMS\Task Sequence
TSBootShell 4/23/2015 4:21:31 PM
736 (0x02E0)
GetTsRegValue() is unsuccessful. 0x80070002.
TSBootShell 4/23/2015 4:21:31 PM
736 (0x02E0)
End program: TSBootShell
4/23/2015 4:21:31 PM 736 (0x02E0)
Finalizing logging from process 728 TSBootShell
4/23/2015 4:21:31 PM 736 (0x02E0)
Finalizing logs to root of first available drive
TSBootShell 4/23/2015 4:21:31 PM
736 (0x02E0)
LOGGING: Setting log directory to "D:\SMSTSLog".
TSBootShell 4/23/2015 4:21:31 PM
736 (0x02E0)

Press F8 in order to get a cmd window and see if the client got an IP address.
Torsten Meringer |
There's no IP Address when trying to the command prompt. It doesn't even show a MAC Address.

OSD Task sequences failed in application installation step.

Hello,
I am deploying win 7 with installing app-v client application(by package), I applied this Task sequences on some of devices sometimes it worked and installed app-v client application but in some cases
Task sequences failed to installed app-v client steps.
Please provide reason for this and how to resolve this.

Certain pre-requisites need to be installed for the App-V client to successfully install.
Take a look here http://sccmentor.wordpress.com/2013/05/21/deploy-the-app-v-5-0-client-with-sccm-2012/
Note that KB2533623 has been superseeded if you are pushing out any Windows Updates as part of your OSD.
http://sccmentor.wordpress.com/2013/07/30/kb2533623-superseded-by-kb2758857/
Have these pre-reqs been applied in the Task Sequence prior to the App-V client install? If not add them in and try the push again.
Cheers
Paul | sccmentor.wordpress.com

Win 7 x64 OSD Task Sequence BSOD with SSD

Hello,
I have recently rebuilt my OSD Task Sequences into ConfigMgr 2012 R2 and consistently experiencing BSODs on machines with SSDs after the machine boots after the "Setup and Windows ConfigMgr" step. When the machine reboots and starts Windows
Setup, it Blue Screens immediatley after attempting to Update System Registry with the Stop Code 0x000000f4
To validate the health of the SSDs, I am able to successfully build the same machines using bootable media from the (still standing) 2007 environment. Also, replacing the SSD with a standard HDD builds the machine successfully which makes me question
my driver packages less than when I first saw this. I am unable to see any steps in the Task Sequence that appear different between the 2 environments.
I have captured the logs from WinPE as well as the system drive before the crashes have occured - can anyone suggest where I should be looking to help flush out why this is occuring? For what it's worth, the drives are Crucial m4 SSD 2.5 128GB SATA
6Gb/s with the most current firmware.
Thanks
Scott

Here is a quick update as I continue to struggle with the same issue on a few different models in our environment.
I have made attempts with multiple different combinations of drivers in packages and continue to see BSODs when the TS reboots after configuring the ConfigMgr client. I have deployed the captured Win 7 image using a basic Task Sequence and have also
brought the Win 7 image from the 2007 environment into 2012 and replaced it in the MDT Task Sequence and the results are all the same.
Given that I can build machines using a Task Sequence with SCCM 2007 but not with ConfigMgr 2012 R2 points at this being a Task Sequence and\or Driver issue. I am appreciative of any suggestions or ideas.
Thanks
Scott

SCCM 2012 Export Task Sequence fails with generic error message

We have a complex task sequence comprising of more than 50 applications\packages, 1975 drivers, 18 driver packages etc etc. Its long, it's big and it will not export with it's content.
We have several environments for development test and live. I am attempting to export the primary task sequence with all it's dependencies from live so that I can port it over to a new development environment.
I can export the zip file without content and it comes to 92Mb in size. The entire task sequence software set is 50Gb+. When I attempt to export with all dependencies and content the process gets about 60% of the way through and fails with the error
"Error: The filename, directory name, or volume label syntax is incorrect"
Googling the error roughly defines the problem as 'the export process cannot access the defined source path for one of the dependant items'
I wrote a PowerShell script that looks as every application, package, driver, driver package, boot image, os image and software update package in the entire SCCM software library and verifies that each and every package has a valid UNC source directory
that can be reached using test-path.
I also wrote another tool that parsed the entire source software library on the server looking for permissions errors (permissions on the structure set at a directory level rather than inherited), directories that were too long, inaccessible or otherwise
blocked, nothing was found.
It will take a very long time to go through and check each and every dependency by hand - time I do not have at present.
I looked in the TaskSequenceProvider.log as that is supposed to contain messages from the export process and found the messages in there far too high a level to use
=======================
<![LOG[Setting status complete: status code = 0x0; ]LOG]!><time="13:00:41.161-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="4168" file="exterror.cpp:128">
<![LOG[[PID: 3500] Invoking method SMS_TaskSequence.ExportXml]LOG]!><time="13:00:42.339-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="4168" file="wmiprovider.cpp:333">
<![LOG[[PID: 3500] Done with method SMS_TaskSequence.ExportXml]LOG]!><time="13:00:42.341-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="4168" file="wmiprovider.cpp:352">
<![LOG[Setting status complete: status code = 0x0; ]LOG]!><time="13:00:42.341-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="4168" file="exterror.cpp:128">
<![LOG[[1AFF658 PID:3500] Received shutdown request from WMI]LOG]!><time="13:01:36.036-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="5592" file="wmiprovider.cpp:399">
<![LOG[[1AFF658 PID:3500] Initializing provider for namespace root\sms\site_P01]LOG]!><time="13:02:36.550-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068"
file="wmiprovider.cpp:90">
<![LOG[[1AFF658 PID:3500] Initialization of provider for namespace root\sms\site_P01 succeeded]LOG]!><time="13:02:36.551-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1"
thread="7068" file="wmiprovider.cpp:107">
<![LOG[[PID: 3500] Invoking method SMS_TaskSequence.LoadFromXml]LOG]!><time="13:02:36.554-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068" file="wmiprovider.cpp:333">
<![LOG[[PID: 3500] Done with method SMS_TaskSequence.LoadFromXml]LOG]!><time="13:02:36.558-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068" file="wmiprovider.cpp:352">
<![LOG[Setting status complete: status code = 0x0; ]LOG]!><time="13:02:36.559-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068" file="exterror.cpp:128">
<![LOG[[PID: 3500] Invoking method SMS_TaskSequence.ExportXml]LOG]!><time="13:03:05.428-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068" file="wmiprovider.cpp:333">
<![LOG[[PID: 3500] Done with method SMS_TaskSequence.ExportXml]LOG]!><time="13:03:05.431-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068" file="wmiprovider.cpp:352">
<![LOG[Setting status complete: status code = 0x0; ]LOG]!><time="13:03:05.431-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068" file="exterror.cpp:128">
<![LOG[[1AFF658 PID:3500] Received shutdown request from WMI]LOG]!><time="13:03:36.369-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068" file="wmiprovider.cpp:399">
====================
Is there any way of increasing the log verbosity? I need to see what item is causing the export to fail.
Is there another log containing the information about the export & what it is doing?
All out builds that use the task sequence complete successfully, we can edit the sequence fine, make changes etc. so no internal corruption we can find.
Any ideas?

Torsten, smsprov.log did indeed prove useful, I could see every package as it was validated. Unfortunately the log was wrapping about every 4 minutes and it takes 3+ hours for the task sequence to reach the fail point so I still cannot see the offending
package as it wraps before I can get to the log.
I will increase the size of the log and see if I can maintain some details to investigate.
There was nothing of note in the event logs, certainly nothing leading me to suspect that WMI might be reaching its limits.
I will keep looking for the cause and will post here when I find it <= positive thinking :)

XP to Win7 Upgrade Task Sequence failing with the error 0x800700C1 (Already applied the Hot Fix KB 2910552)

Hi all
I'm having the same error that is described in this article http://support.microsoft.com/kb/2910552/en-us
So i have applied this hot-fix to the SCCM 2012 server and update the distribution points of all boot images. and also i have deployed the hot-fix client package to my XP machines. client's Task Sequence component is now updated to 5.00.7958.1104.
Still i'm getting the same error in SMSTS.log
Please help me on this.
Asitha

Which boot image are you using? It has to match the architecture (x86 / x64) of XP if I am not mistaken.
Torsten Meringer | http://www.mssccmfaq.de

OSD Task sequence failing

Ive done a build and capture in Sccm and now im trying to test to do a test deploy however im getting these errors in smsts.log
http://i615.photobucket.com/albums/tt232/regan1985/wqewqewq.jpg
This is my task sequence
http://i615.photobucket.com/albums/tt232/regan1985/12356.jpg
Thanks in advance

Try to remove the "Apply Data Image 1" step from your TS.
The 1-1 partition is used for boot files and recovery info, and is created by default. The second (2-2)
partition is the one used for the Windows 7 installation.
Benoit Lecours | Blog: System Center Dudes

OSD Task Sequence Fails with Error 0x80091007

Similar Messages

Maybe you are looking for