Tax Error & Rectified and getting error while realing accouting doc.

Dear friends,
User made a mistake while defing condition like didnt entered the tax code.
While releasing Accouting document against that sale doc its giving error. So verified all conditions and maintained properly Tax code.
Now when i am releasing that sales document from VFX3, system giving same error.i.e tax code error.
Now how can i release this sale documents to accounts.
Regards,
Venkat

Try the following
VF02 -> pricing conditions header (Ctrl + Shift + F9) -> Update -> B (Carry out new pricing) -> Save
See if it solves your problem.
Cheers
Ashish

Similar Messages

Trying to insert a table and getting a "While executing objectTag in Table.htm, a JavaScript error o

trying to insert a table and getting a "While executing objectTag in Table.htm, a JavaScript error occurred." message appears. how do I fix this?

Try this Technote
http://kb2.adobe.com/cps/405/kb405604.html
Try step 4 here
http://kb2.adobe.com/cps/405/kb405604.html#main_dat

Error while generating ARE doc. Internal number .

Error while generating ARE doc. Internal number .
Message no. 4F238
while creating ARE1 ,whilke saving the system is giving a message.
please help.
points will be rewarded.

check whether You activated the SPRO setting for BEX.
SPRO -->SAP Business Information Warehouse --> reporting relevant settings -->
general reporting settings > activate personilisation in BEX>
P

Tax error while posting an invoice in SRM

We are using SRM 5.5 SP4, ECS and ECC 6.0. We are using vertex for tax caluculation and we configured the tax calculation to always occur in ECC.
One more important point is, client has decided to use invoicing in SRM. Now the problem is we ran in to so many tax related issues and we opened OSS messages for this but SAP did not help. Let me explain the problem in detail.
1) We used to get "Tax jurisdiction code could not be determined" error while creating shopping cart, but we implemented note 436760 and hardcoded a value and got rid of that error.
2) When we create a SC, the copy of PO is created in ECC and vertex is called for tax calculation and tax is calculated properly based on the tax hierarchy except when you use the Shipping Address (external), so when I used the delivery address other than plant, it should calculate based on that address but it was not doing that, its calculating based on the cost object's jurisdiction code. For this problem, we have implemented ME_ADDRESS BADI in ECC, but with this BADI, it is always taking delivery address's jurisdiction code, which is also wrong.
The tax jurisdiction determination should be from 1) Delivery address if its different from plant, else it should look in to the cost object, else storage location then plant.
So we implemented the above logic in that BADI and there is no problem with PO taxes.
3) When we create an invoice with reference to PO, the invoice verification program is always determining the tax jurisdiction code from plant even though the taxes on PO are calculated based on cost object, hence the IDOC is erroring out by saying there is a difference in tax.
So we implemented the user exit and used the same logic of tax determination and its fixed now.
4) Finally, we are trying to create invoices without PO's in SRM, here no tax calculation is happending in SRM, but when we try to post the invoice in to ECC, we are getting the following error
"SAX processing failed on input stream#SAX processing failed when attempting to add child element to parent. (parent element=com.vertexinc.tps.common.domain.LineItem, child element=com.vertexinc.tps.x.."
So I am not sure how to fix this, we are at the dead end now out of ideas, so trying to get some help from experts like you about looking at this problem in a different angle. Now there are a couple of questions I can ask you
1) Did we do something wrong by selecting R/3 as the tax calculation system, if not is it difficult to fix this error and move forward?
2) What if we need to change the design and start calculating the taxes in SRM by connecting SRM to Vertex, will there be any new challenges? and do you have any config doc for this? Also we are implementing this rollout for US, Canada and Mexico companies.
I would really appreciate if you can reply me with your valuable input. You can also email me if @ [email protected]
Thanks a lot,
Sreedhar

Hi
It's recommended to have the same Tax related configuration data replicated in SRM system from R/3 as well.
I don't recommeded you to go with Hard-coding of tax codes.
We have faced similar issues with Delivery address and we have to solve it using our custom logic inside the BBP_DOC_CHANGE_BADI and BBP_CREATE_PO_BACK BADIs.
Anyways, send the detailed business requirements to my mail which are already having with you. )
I will definitely help you out.
Please refer to following threads as well.
sales tax gurus
How to display country related tax codes in SRM
e-Invoice tax calculation.
Tax code T1 does not exist for jurisdiction code error in shopping basket
Drill down facility not working for Tax codes ....Urgent!!!!!
Tax Issue
Tax Calculation
Tax setting in Extended Classic Scenario
Withholding Tax in SRM5.0
IDOCS for Tax Information
Taxes in Bid Invitation
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Tax GL determination error while posting billing doc

Dear Experts
Am able to post billing documents into FI for a customer from a plant with out any errors. But for the same customer,sales invoice generated from different plant (both cases, plant region is same ), it is not taking proper tax GL accounts w.r.t. the state.
Can anybody suggest, the SPRO config steps to be checked while creating new plants, where there is a link for tax GL flow and plant/sales office
Thanks
Venugopal

Hi,
Go to OB40. Maintain the entry for EXD and relevant tax code whichi is used in your billing document. Also update the proper GL Account.
Regards,
Jigar

Statistical posting to Internal order and Cost center while real to PSG

Dear SAP Gurus,
There is a requirement is to post statistical posting to Cost center and IO while real posting to PA. I tested and found that I can have only either of Cost center or IO as statistical receiver. Is this standard behaviour or some error in set up.
Thanks,

Hi
I am not sure how IS-H works.. But for sure, it should allow you to enter 3 stat objects...
There would be some ABAP trick pertaining to IS-H which I am not aware of...
I can guide you a bit... During SD billing, ask abaper to put a break point and manually enter the values for cost center and IO and then post the doc.... One of these 2 will be the outcomes
a. Either it will get posted or
b. It will get over written before posting....
based on the outcome, you will have to decide your next course of action
Also, if your cost center to IO is one to one mapping (Chances would be rare), you can simply write a substitution which would always prevail
I am sorry I could not offer you a complete solution.. But, this is what comes to my mind...
Regards
Ajay M

Error while realeasing billing doc for posting

Hi
When I am releasing the billing document for accounting I am getting the following error
" Condition type MWST tax code A0 is missing"
In the analysis of the error it says that the system could not find an entry in A003 and A053 for condition type MWST and tax code A0
I have checked all the config/master etc can't see any flaw
The tax code A0 is maintained with the proper condition type /Account key .
The funny part is that this is a training client which was copied from the dev client. The process is working fine in dev with the same config/master.
Please point out if I am missing something.
Thanks in advance.

Hi Rohit,
I hope, you have maintained following, but just check one more time:
T. Code: OVK3/ OBK4 - make sure that condition type: MWST (output tax) is maintained and it is assigned correctly to Tax Classification to Customer and Material, respectively.
Furthermore,
T.Code: FTXP - Maintain Tax Code for Tax procedure TAXD, against your country which your are assigning in MWST (VK11) like A0, A1 ...etc (as Output tax).
Now,
T. Code: VK11/ 12 - Assigne this tax code in condition maintenance for MWST
Hope, ths may help you.
Best Regards,
Amit

Error while posting parked doc

Hi friends
I am getting the following error while posting a parked doc-
Field BSEG-SECCO. does not exist in the screen SAPMF05A 0303
It is actually asking for the Section Code which does not appear in the screen. I am wondering where I can set the Section Code as mandatory or optional. I have checked the FSV but to no avail.
Help me plzz........

Hi......Thxs a lot for ur reply.......But none of the OSS Notes suit my requirement. However, I have observed that when I park the doc thru FBV1 and later try to post the same, it is getting posted without any errors.
Any idea how this is working?
Cheers
Hrishi

Error while relasing biling doc to accounting

Hi,
I am getting this strange error while releasing the billing documents to Accouting. We are in the initial phease of our realization and have nor been able to release any billing docs so far because of this error. I am missing something in the materail or is it something to do with costing key. The same settings for costing key are working in sandbox..
"In Profitability Analysis (CO-PA), the system tried to
valuate a line item using the current standard cost
estimate.
In order to determine the current plan period, the system
needs to read the valuation segment of the material master.
The system has found that the current plan period is not
filled forproduct "10000443" in plant "1000".
The system looked for the material cost estimate using
costing key "Z01", as defined in the Customizing settings
for CO-PA.
Thanks in advance for an immediate response
Regards

Your system is setup to access the standard cost when a billing document is created. This is configured in KEPC. Either no standard cost exists for the material, or it did not exist in the period of creation of the billing document. To fix this contact controlling team.
Assign points if helpful

Error while releasing Billing doc to Accounting

Hi all
I am gettin the following error while releasing a Billing doc to FI-
Reconciliation account 240001 or short key 00 is not permitted
The Billing doc pertains to Export sales and the billing Doc type is Export Invoice. However the Customer Recon A/c is defined as 240000 which is for Domestic Sales. A/c 240001 stands for Export Sales. I am wondering why it is asking for the Export Sales Recon a/c. Does this has something to do with Alternative Recon A/c? Should I set an Alternative Recon A/c and check this? If yes, then should it be defined in SD or FI?
If any1 has come across this prob, plzz help me.
Regards

It is all Fi related, and should be defined by the Fi Consultant.
But by changing the sort key I think your error can be solved. But I don't exactly know your config settings to recommend any solution.
Regards
AK
Please reward if helpful

Getting Runtime error while including pdf doc with Form guides.

Hi,
I have urgent requirement where I have to capture the data in the PDF doc   what user enters into the form Guides.
I am trying this on ES2.
I followed the steps what they mentioned at :: http://help.adobe.com/en_US/livecycle/9.0/workbenchHelp/help.htm - >>Creating Guides using LiveCycle Workbench ES2 -> Including the PDF doc with a document.
They mentioned that we have to create form design (pdf) with same data model.. But When i tries to create form design by including the data model .. it is not allowing to me save as pdf and its telling that we have to save as xdp only.   So saved as xdp only and followd all the same steps what they mentioned .. but we are getting error like :::
2010-01-07 17:13:08,227 ERROR [com.adobe.idp.workflow.dsc.invoker.WorkflowDSCInvoker] An exception was thrown with name com.adobe.repository.ResourceNotFoundException message: ALC-REP-018-000: Resource
[/Form/SampleFormGuides/1.0/Form/MyInformation.xdp] does not exist or you do not have sufficient rights to access it. while invoking service RepositoryService and operation readResourceContent and no fault routes were found to be configured.
Please find my form guide setting to invoke my REST URL.. and my process.
please help me in this regard ,,,,,

Hi Han,
The problem might be in path of the resources. Please check the path for the pdf you includes at form guide.
Please check concat( ) operation .. make sure that it is correct and pointing as per your work bench.
And
At Configuring the REST endpoint for the PDF render service:,   6th point , please select   as System level rather than INVOKE_PERM.
I hope it helps.
Thanks
Praveen.

Tax Error while posting Customer Invoice

Hello Everyone,
When I try to post a customer invoice using one of the default tax code (eg. 1O - output tax 10%), during simulation the system gives following error message with the item list as below: "Error message still exist - see error log". The error log shows following description - Msg Type E : Item 003 must be corrected.
Itm PK Account    Account short text            Assignment         Tx           Amount
1 01 100253     DDS SERVICES                                              1O          8.000,00
2 50 800000     Sales revenues - dom                                    1O         7.272,73-
3 50 175000     Output tax                                                      1O          727,27-
Can anyone plz help me out as to why am I getting this error and what is the solution to it?
Thanks,
AMD

Dear AMD008
were you maintain properly in OB40 MWS (out put tax) relevant GL Account
Note: are you using NEW GL please conform me
Regards
shankar

Tax error while posting MIRO

Hi All,
Im currently facing following prob "While in MIRO posting, error coming as tax procedure V1 not maintained in TAXEXL" .
Pls let me know how to go ab taxation prob ??

Please check procedures maintained in the tax type mentioned. If V1 is given. If not please assign input tax.
Hope this will help.

Run time error while creating billing doc.

Hi all,
While saving a billing document I am facing runtime error every time. Can any one help me what are the possible reasons and possible solution to overcome this. Since it is on high priority, expecting response at the earliest.
Sunanda.P

Dear Sunanda,
Since it is on high priority, expecting response at the earliest.
You must get in-touch with your BASIS-Admin, for earliest resolution of the error, as he is the only one, who may find the reason and fix the same, at earliest.
Or,
If, you could provide System error-log, at the time of Run-time Error, then, some work arounf could be suggested.
Otherwise, It would be like Hit-n-Trail.
Best Regards,
Amit
Note: This is, what I feel and suggest, in such cases:
[ABAP/ Runtime Error|Re: update control terminated error]

Error while creating Billing doc using VF01 for Debit memo req. from RRB

Hi,
I am creating billing doc for my Debit memo req. which is created using RRB(DP90, DP95).
Error message - Item 000010 does not exist.
When I debugged and looked into code it seems following lines are causing problem.
Program
LV60AA28
Line u2013 734
IF vbap-vkgru EQ vkgru_dyn_posten.
    IF vbap-aufnr IS INITIAL .
set AUBEL because it was overwritten by VBAP-VBELN
      vbrp-aubel = vbap-vgbel.
      vbrp-aupos = vbap-vgpos.
      vbrp-autyp = vbap-vgtyp.
This code was not in 4.6 system.
We have just migrating from 4.6 to 6.0 and facing this issue while testing.

First of all you should try to learn how to express in a public forum like this.
On your comments
Do some ground work from your end
why should I ?? if you want you can do ground work or any work. If you post a question, you have to hear patiently all suggestions and dont scribble whatever you want.
You should have some basic
   understanding of SAP ABAP.
You should have posted this question ABAP forum !!!!   Why without any sense you have posted in sales forum ??

Tax Error & Rectified and getting error while realing accouting doc.

Similar Messages

Maybe you are looking for