TAX PROCEDURE CONDITION/FORMULA BASED.

HI EXPERTS,
i WANTS TO KNOW MORE ABOUT TAX PROCEDURES USED IN AVERAGE SCENARIO. I HAD STD PROCEDURE I.E TAXINN AND TAXINJ .BUT THERE NOT MAINTAINED CESS.H.CESS CONDITIONS AND DEDUCTIBLE, NON-DEDUCTIBLE RM AND VAT CONDITIONS. SO PLEASE HELP ME AS I WANTS TO CREATE NEW TAX PROCEDURE.
THANX IN ADVANCE.
REGARDS WITH,
RITESH.

Ritesh,
Please go through this link for taxinn. Better currently to use TAXINN.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/9e/0b941b0fd64873bc54e8745fb044e7/content.htm
Thanks & regards
Hameed Parvez

Similar Messages

  • Tax procedure condition based / formula based

    Hi,
    I have a query.
    1.Based on tax procedure how we can identify that the tax procedure is formula based or condition based.
    2.what are advantages over one another.
    3.Is their any other way we can find out tax procedure attached to po is formula based / condition based.
    4.What is sequence  to create procedure and maintain record for these two procedure.
    Thanks & Regards
    Atharva G.

    Hi Atharva,
    I will list out the differences and advamtages between the two
    TAX INJ procedure is formula based
    TAX INN procedure is condition based    
    In TAX INJ to define the tax rates we are using excise tax rate in J1ID AND tax code ( FTXP)
    In TAXINN nothing we are entering in tax code also , we are entering every duties in FV11( condition records)
    Amending the duty rates is very easy in case of TAXINN than TAXINJ since we are mentioning the tax duties in FV11 through validity periods, if the tax rate is changed from that date we can maintain the record for the new period in FV11
    IN TAXINN assign taxcode to company code is manadatory but its not manadatory in case of TAXINJ     
    Kindly get back to me, if you have any more clarifications.
    Balakrishna R.V
    Sonata Software Pvt Ltd.

  • Tax Procedure - Condition Base Value Inclusive Freight

    Hi Experts,
    I have created a routine and assigned it in Tax Procedure - BASB Condition Type.
    In that routine i have written the coding like ZWRBTR = XKAWRT.
    Here XKAWRT holds the value as Net Value + Freight Value.
    Problem is while opening Purchase Order in Change Mode,
    If i directly go to Taxes Tab the Base Amount of the BASB condition type is displaying as 0.
    But the Material No and the item No are displayed correctly.
    But if i go to the Conditions Tab then Taxes tab this value is getting updated.
    My Doubts are
      Do we need to assign the routine in Pricing Procedure also?
      While opening in change mode the values are already saved in the database,
      then why does the standard program is not picking the value to screen?
      Am i need to write any logic in my routine to achieve the above?
    Regards,
    Ragunathan.R

    Hi,
    Its not helping to solve my requirement.
    Can i get the links for assigning the routine in appropriave condition types in Purchase Order.
    Regards,
    Ragunathan.R

  • Tax procedure condition type

    Dear Forum,
    In tax procedure, the first step is normally base amount and subsequent steps are input and output tax.
    May I know what is the reason to have additional condition type besides input and output tax in tax procedure?
    Thanks
    Rgds

    Dear Srini,
    As you referred some countries having only three condition types, like Base amount , Input and Output -  because their country Tax structure will be very simple.
    When you get something. VAT 15% when you sell some VAT 20% this is simple tax procedure.
    Whereas you take example of Indian Scenario. When you want to buy a Excisable Material the tax structure will be like this,
    Base amount  100
    Excise Duty      14
    E.Cess                7
    H.E.Cess             7
    So it is the legal requirement each amount of tax has to be spitted as per the Statutory act.
    For the above reason only some countries have very easy Tax procedure, some will have complicated tax procedures.
    Hope it clarifies.
    Thanks and regards
    Praveen.J

  • Conditional Formula based on Print Number

    Post Author: DigYerOwnHole
    CA Forum: Formula
    Hi,Does CR have a way to base formulae on the print copies?Here's my situation:Using Crystal to print off sales invoices. The invoices have to be printed three times. On the first copy the invoice has to state "Original", on the second copy the invoice has to state "Duplicate", and on the third copy the invoice has to state "Triplicate". In all other ways the rest of the report is identical.So, I'd really like a formula to handle this change in text based on the print copy, problem being I don't know if CR has a notion of 'Print Copy #' Aside from using pre-printed and collated stationery, the only method I've found is to create the three invoice reports and insert them as sub-reports to a main report. However, this method has given rise to some horrible pagination problems that I have been unable to resolve.I'm using CR11 ThanksDigs

    Post Author: DigYerOwnHole
    CA Forum: Formula
    Thanks. Guess I'll need to take a further look in to the pagination issues I currently have.Would be awesome if Crystal carried this type of functionality though.

  • Conditional formula based on exporting

    Is there any way to have certain fields or sections show when the report is on screen, but hide them if the report is being exported?  I know how to do conditional suppression and hiding in general, but I don't know of any way to trigger off an export command.

    SDK only

  • Questions about CIN tax procedure choice and pricing schemas

    Hi all,
    I have to implement SAP on a Indian company and I'm verifying all particularity about this country (in particular tax procedures and the great number of differents tax conditions used).
    I have two questions about tax procedures and pricing schemas. Every feedback about thse points will be appreciated.
    a) To choose tax procedure TAXINN or TAXINJ which are the elements that I have to consider?
         I have read lot of documentation about CIN implementation and Iu2019m oriented to choose TAXINN schema, but If possible I  would  to understand better which are on behalf of one choice or another.
    b) To define pricing schemas for India, after check with local users and using examples of documents (in particular tax invoice) actually produced, I have understood that taxes have to be applied on amount defined starting from price list, minus discounts recognized to customer plus surcharges eventually to bill (packing, transport,  etc.).
    Itu2019s correct for any type of taxes that tax amount is calculated on u201Cnet valueu201D defined at item level or there are exceptions to this rule?
    Thanks in advance
    Gianpaolo

    hi,
    this is to inform you that,
    a) About point 1 I know the difference between the 2 tax procedures (conditions or formulas). I also have read in others post in the FORUM that TAXINN is preferable. So I would to understand which are the advantages to choose instead TAXINJ. There are particular reasons or it'a only an alternative customizing setting?
    a.a. for give for posting the link : plese give me the advantages of TAXINJ and TAXINN
    CIN - TAXINN and TAXINJ
    b) About point 2, to define which value has to be used as base amount to calculate taxes isn't a choice, but is defined depending by fiscal requirement of the country, in this case India fiscal requirement. I know that, as Lakshmipathi
    write as answer on my question, exception could be, but it was important for me to understand if I have understood correctly the sequence of the pricing condition in the schema in "normal" situation.
    b.b. you can create your own pricing procedure for this and go ahead.
    hope this clears your issue.
    balajia

  • Routine in taxing procedure of PO

    Hi Friends,
    In Pricing condition that has been  define by MM person contain amount in KBETR field. Same amount is to be copied in different condition type which has been define in Taxing procedure.
    In Taxing procedure, condition type gets linked through standard subroutene having some number .But in our condition type a separate subroutene is to be defined according to our needs.
    So, how to write subroutene and most important to link it to taxing procedure condition type.

    Hi
    In the Access sequence maintain the Table sequence as exclusive for the Second access... This will ensure that if the Condition record is found it will adopt that.
    Please check if your PO Qulaifies for the Second access or not.
    Whether it is a third party Sales order & Check the Customer data & Country
    Thanks & Regards
    Kishore

  • Change tax procedure account key

    Hi ,
    We need to update an account key in tax procedure condition for sales tax.
    what is the best way to do it  it
    Delete the existing z condition and create the new condition with new accounting key
    Change the accounting key  in old condition type
    could  you  please advise it effects on the the SD side.
    Regards,
    Amy

    Normally this is controlled in the tax configuration - see transaction FTXP.

  • Quantity based condition type for excise duty  calculation in tax procedure

    Hi,
    If any one has worked on the issue of excise duty  calculation on Quantity of items purchased Quantity based condition type.
    [<b>For a formula based calculation procedure TAXAU]</b>
    Example : If quantity purchased = 10 units
              Duty to be calculated @ Rs.3 per unit
              Duty on the 10 units = Rs.30
    Other than SAP Note 816835 any help is appreciable.
    Thanks a lot,
    Uma
    Message was edited by: Uma

    I could not find this condition type/Tcode  in our client system.
    Even we are on 4.6c.
    Thanks,
    Message was edited by: Uma

  • Condition based Tax Procedure

    Dear All,
    Condition based tax procedure will be used to calculate Excise Duties only, remaining taxcess handled by the Tax Types , Is it right? in TAXINN procudure.  How we can able to handle excise only condition based and other taxes from Tax tpes.
    Regards

    closed

  • Country India Specific - CRM with TAXINJ Formula Based Procedure

    Hi
    My client have TAXINJ (formula based) procedure for excise calculations. We are implementing CRM Internet Sales.
    I have found through OSS # 513896 that says that - TAXINJ can be used if it is changed to Condition Based Calculation.
    But the excise procedure at my client's installation in very complex and there are many reports and dependent developments that are done based on the Formula Approach of TAXINJ. So, changing TAXINJ from Formula Based to Condition Based would be a huge effort.
    Is there a way that the CRM system can run on the Formula Based Approach by making changes in CRM and not R/3?
    Else, pls, suggest the easiest way (in CRM or R/3) to achieve the same.
    Regards
    SC

    Hi,
    Thanks for your valuable inputs.
    I am still confused what standard SAP says regarding Incoming Excise Invoice cancellation, the comments are contradictory even I searched in other threads also but there also no standard answer.
    does it allow the cancellation if Part2 is posted?
    I followed the steps suggested by SAP Learner. But it does not allow me to do the step 3 it gives me messageu201D No Part I exists for availing credit in excise invoice XXXX 2009".I checked table J_1IPART1 and table J_1IPART2, the entries are there for excise invoice XXXX.
    Please advice As per Indian Tax law is it OK if I post the difference amount using J1IH other adjustment. But if we have to post the -ve difference then how can book that amount. I extracted the registers it is showing the JV values but does not show any reference document.
    With Regards
    Sarvesh Kumar Vashist

  • BASB CONDITION IN TAX PROCEDURE.

    Hi Guru's
    Pb00--100      (Gross Value )
    ra01--2           (Discount )
    Net value--98  
    My question is while creating Purchase Order if i give  Gross value as 100 as above
    and if we add tax code what will the amount transfer to BASB in tax procedure , will it be
    net value98 or the gross value100.
    Rgds
    Kamat.

    Hello,
    Tax is always based on net payable amount to the Vendor.
    Thanks,
    Venu

  • Condition value is zero in TAX procedure TAXINN

    Dear All,
    Myself in an implementation project. Have configured CIN. There is a problem in Tax procedure.
    Our access sequence is tax classification.
    In PO i have mentioned the tax code and when i click taxes button the condition value for BED condition type is ZERO. (actually it should be 200 INR). But the calculation thereafter is correct. ie, Primary education cess on BED is 2% on BED is 4 INR .
    Expecting your valuable suggestions..

    hi
    please check following details
    J1ID for material
    condition maintain in FV 11
    GL assigned in OB 40 for tax code
    tax code assigned to company  code
    Regards
    sangita

  • Tax procedure

    Dear all,
                   What exactly the difference between Taxinj (condition based and formula based tax procedure), Taxinn (conditionbased taxprocedure)?I want to know the advantages & disadvantages of both.
    Thanks.
    Regards,
    Aditya.

    Taxinj :
    1. This we call as formulae pricing procedure.
    2. condition record is calculated based on the tax code.
    Taxinn:
    1. This we call as condition based pricing procedure.
    2. The condition record is determined based on the tax code as well as condition record.
    Mainly if we have big project it is not sufficient to get the condition record for tax conditions  through tax code, so it is necessary to maintain the condition record.
    Ex: Tax code is a two letter alpha numeric naming convention we use. ex if it country  USA , U1 - - - -  U9 .or ua  - - - uz.
    If we want to maintain more then this it is very difficult , so this is an disadvantage for the formulae pricing procedure.
    Thanks
    Gopalkrishna

Maybe you are looking for