TC8305C not online/no Internet access

18 months of regular performance, no changes made to settings of any kind recently. WiFi signal is good on all devices(2 PCs, cell phone, ipad, etc.) No Internet access on any.
Modem has solid power light, flashing us/ds light, and mostly solid WiFi light with occasional quick flash.
Power cycled several times for several minutes, and tried basic modem reset (5 seconds on reset button). No change in condition.
Please help.

If your US/DS (upstream/downstream) light is flashing you will not have an Internet connection. It might be a line issue. You can post the signal levels by going to "connection" and "XFINITY Network" here, or simply call Comcast at 1-800-COMCAST they can check the levels your gateway is receiving and see if this is your problem.

Similar Messages

IPad 2 fully connected to Wi-Fi and a VPN, but not getting any internet access

I'm on iOS 8.3 using an iPad 2, and the other day out of nowhere, I stopped getting internet connection to my iPad. I am still connected to my WiFi network as well as a VPN I was using before I lost internet connection (which is weird, as I figured I'd have lost that), and the WiFi icon is still there. I've tried multiple methods to try and fix the problem:
updating the iPad (I was on iOS 8.1 when I lost connection)
forgetting and then rejoining the network
renewing the lease under the WiFi network's settings
rebooting the iPad
turning WiFi off and on
turning airplane mode and Do Not Disturb mode on, then keeping the iPad turned off for 10 minutes (as suggested here: iPad connected to wifi, but no wifi icon and no internet access?)
unplugging and then plugging back in the router's power
turning off the VPN (it hadn't caused any problems for the week I had been using it, but I wanted to make sure)
doing a hard reset on the iPad
and NONE of these have done anything to help. I have no idea what to do now, as I can't seem to find really anymore possible solutions. Also, yes, I checked the network IP address and it doesn't start off with "169". And the iPad is the only thing that isn't getting internet access, every other device in my house is doing fine, so I don't think it's the WiFi network itself. Unfortunately I can't try connecting to another WiFi network either to see if I can still actually connect to the internet, as I live in a semi-rural area. I've never run into any issue like this in the 3 years I've had the iPad, and I have no idea what's going on. Will I need to take it into an Apple Store to have it fixed, or is there anything left I might be able to do myself?

When you unplugged the router did you leave it off for at least 3.minutes? Try unplugging it again, waiting & then bootimg back up.
Try to connect your iPad again,
If you have another iOS device that is connected, check it's wifi settings under your network the IP address settings & cross compare it to your iPad 2
Some routers also have settings where you can increase allowable connections. Have you tried connecting just your iPad with no other devices connected?
if that doesn't work, I would suggest you try & find a public wifi hotspot to see if you can connect there. If not, then I would suggest your next trip be to a Genius Bar to Let Apple diagnose the issue.

I do not always have internet access.

How can I get a copy of Illustrator to install on my computer so I am not dependent on the cloud? I seriously do not like the idea that I am operating on the internet instead of on my hard drive. I often need to use my software in places where there is no internet access.

You can use Creative Cloud and once installed/activated I'm pretty sure you have 30 days until it has to be reconnected to the internet.
So even with sporadic internet, unless you foresee yourself going an entire month without even a mobile phone with data then I wouldn't worry about it.
Contrary to the name it doesn't actually operate off the cloud.

Connected to Router, but not getting any Internet access

Hello,
So I recently got my parent's old router. It's a Linksys WRT54G. I had used it with my MBP when I lived with them a year ago, and I never had a problem. Airport was always able to locate their network and log into it.
6 months ago I moved out and have been using a direct Ethernet connection to my Road Runner Cable modem. No problem.
Yesterday I did some rearranging of my apartment, and now my computer isn't near a cable outlet. So I got the old router old and started getting it running.
Over many stress filled hours I have it at the point where my MBP is connected to the network (I named it, gave it a password, it shows a strong signal), but I have no Internet access. I even ran the Network Diagnostics a couple times, and it said my Internet connection appeared to be working correctly. Yet I can't open up any pages in Safari.
I don't know if I need to change any of the router settings?? Or if it's just an old router and I need a new one?? I've unplugged, replugged, and restarted everything numerous times, and still nothing.
Thank you!

Hi Rod,
Let me start by mentioning that when I hit the 'reply' button to write this post, it took more than 6 min for the page to appear. During that time, the 'connected time' displayed to the right of the 'radar' icon slid in and out dozens of times (indicating a dropped connection). If you have the 'magic' broth, I'd be happy to drink it.
You must have seen my posting on the InformationWeek website, which I wrote on after reading the review of the MacBook products in their email newsletter that I receive. I normally don't post on blogs but after reading the pulp in that review - after trying AppleCare and the Genius bar and seeing all of the posts here (with no fix forthcoming from Apple), I felt the need to both vent and to seek a solution outside of these discussion pages.
I have posted the details of my MBP/Airport connectivity issues in detail on other threads here but I would be happy to reiterate them.
My problems appeared to start after the 10.5.2 update. My connections became unbearably slow, to the point that I would begin to get Safari browser connection error messages (i.e., no server response...not connected to the internet, etc.) Then I noticed that the 'connected time' displayed to the right on the 'radar' icon in the menu bar was 'sliding' in and out (I didn't realize what this meant at the time but soon realized that every time it 'slid' out (disappeared) represented a 'droped' connection and when it 'slid' back (reappeared) it represented a reconnection. Both at home and at the office, I run under static IP addresses (home = MaxDSL with Westell modem to APEBSg; office = T-1x2 with NetGear). But about a month ago, I did some more testing. I run VM Ware and Windows Vista and my assumption had been, since Vista, running under VM Ware, utilizes all of the Mac I/O ports, that Vista would share the same slowness with the Mac Airport Wi-Fi. I tried it and, much to my surprise, the connection speed was great (like normal). I then tried an Ethernet hardwire to the Ethernet port on the APEBSg and got the same great connection speed.
So, MBP Airport works with Vista but not with Mac OS and by-passing the Airport Wi-Fi with a hardwire works with both Vista and Mac OS. It's only the Mac OS trying to go through the onboard Airport that gets choked down to unacceptable connection speeds.
I have tried all of the suggestions posted on the discussion board (resetting the CSM, PMU, etc). But, like everyone else, to no avail.
So, it's all about being connected via Wi-Fi (with my 'portable'). That's my problem. And, as you can see from all of the posts, it's not just me. So, you must have received the 'wonder machine' when you got your MBP. My MBP is a 1st gen but you can read posts here of people who just bought theirs (some who indicated that they were 'switchers') and it wouldn't connect right out of the box with 10.5.2. So, I realized that it wasn't 'me' - it was a real problem.
And, I might add that I've been an 'enthusiastic' Apple user since 1979. I've owned almost every model along the way - except for the LISA. In the past year alone, I've encouraged four people to 'switch' to Mac (three of whom I actually accompanied to the Apple Store and helped them with their selection). So, I'm a longtime - happy - user (my wife has a PBG4, my daugher a MacBook, my son a new MBP, plus I have an iMac and a CubeG4) who has hit a bump in the road and have become very frustrated by the fact that Apple does not appear to be responding to a real issue.
I welcome any advice that you might have to offer.

Movie not loaded without internet access

We have developed a flash movie to industry showing production data for a machine. Clients running this flash movie in a web browser. Some of these clients have internet access and others do not.
The clients have access to intrernet shows flash movie without problems.
The clients without internet access just shows a black box with the text note loeaded movie.
The customer does not want to connect these clients to intenet but would consider opening specific ports or websites if necessary.
What is it that requires flash player from internet to download flash movies?
Flash movie connects to a server over XML socket to exchange production data. Serve respond to requests for policy-file-request with <cross-domain-policy> <allow-access-from domain='*' to-ports='*'/> </ cross-domain-policy> \ 0th
It does not matter which version of the flash player or internet explorer that we use. We have tested many different varieties.
Hoping for help!

What errors are you getting when connecting to the server? There's several events you should be listening for, e.g. Event.CONNECT, Event.CLOSE, DataEvent.DATA, IOErrorEvent.IO_ERROR, SecurityErrorEvent.SECURITY_ERROR, etc..
One of those should be giving you some useful information about the connection status.
What sandbox are you using? Here's some info on setting the sandbox to essentially Administrator level so the SWF is allowed to connect to all resource types via a config file:
http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WS5b3ccc516d4fbf351e63e3d118a9 b90204-7c95.html
If not running AIR (which removes the need for that config) you're going to want your SWF to have access to local filesystem and networking without restriction. You should check what Security.sandboxType is set to. If the config file is successful (or you use the SWF settings menu to add the SWF as trusted) it should report Security.LOCAL_TRUSTED. If it's AIR it will report Security.APPLICATION. Then you know the SWF has permission to access network.
Outside that the events returned from the socket connect should let you know if the problem lies on the server. I'm assuming you're already running a Security.allowDomain("*"). I don't know if this pertains to LAN IP ranges however, that'd be a good question. It falls in WAN in the 192.168.x.x and 10.0.0.x ranges.

Web dynpro abap application on Portal does not work via internet access.

Dear All,
I have created a web dynpro abap application and deployed the same on Portal.
The issue I am facing is that the webdynpro application works fine when the end user logs into Portal from Local Network,
However when the Portal is accessed from outside the local N/W via Internet, Portal is working fine for other applications like ESS
but the web dynpro application dont work.
Is this some configuration issue on the portal / abap development or any workaround is possible.
Regards
Abhinav Dagar

Hi
Please try to use the [HTTP Watch 5.0 Basic |http://www.httpwatch.com/download/] tool to trace that WD Application link from the portal and you can easily find out the problem.
Regards
Prakash T

Internet accessed videos aren't playing sound but sound continues to work through itunes etc (not internet)

I have watched a few online videos and played music from youtube this morning either through head phones or the computers speakers. The sound is now not playing through internet accessed videos/ games/ music etc that require sound but the sound continues to play through non internet accessed videos/ music etc. Wondering if i may have clicked something in order for this to happen?

Unfortunately I am not aware of any method to resolve this as in most cases simply loading up PC Suite then attempting to make use of its functions will prompt an update that leaves you with PC Companion anyway. I apologise for any inconvenience this may cause.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

E1200 V2 with no "internet access policy" in built-in web-based setup

I just bought a factory refurbished E1200. The label on the bottom says it is a Version 2 model. When I purchased it, it was loaded with 2.0.02 firmware but I upgraded the firmware to 2.0.04
My problem is that I'm trying to setup MAC address-based restrictions thru the manual/web-based setup and when I click on the "Access Restrictions" tab, I only have simple "Parental Controls" and not the advanced "Internet Access Policy".
Is it possible that I have a mislabeled V1 device? If that is the case, how is it that I was able to upgrade the firmware using firmware from the V2 downloads section.
Do V! and V2 units use the same firmware but more importantly, how do I upgrade the built-in software so that I have the advanced "Internet Access Policy" controls?
Thanks!
Eric
Solved!
Go to Solution.

Very strange indeed then! My subtab only has "Parental Controls" listed.
I've compared it to the one shown here ( http://ui.linksys.com/files/E1200/2.0.00/inter_access.htm ) - and mine does not look like this at all!
I think i have a mislabeled V1 model or at least V1 software loaded,
Does anyone know if it is possible to download and reload the software that is built in to the router or do I need to return it and get a (hopefully) new one?
Thanks!
Eric

To use a router to set up a local wifi network. Would this system be suitable to use with an Apple TV or is internet access require

I'm considering using Apple TV to connect to a projector in a church hall which does not have any internet access. I intend to use a router to set up a local wifi network. Would this system be suitable to use with an Apple TV or is internet access require

Welcome to the Apple Community.
Yes, that will be fine providing you don't want to play any protected content.

Block internet access by MAC address all the time

I want to be able to block MAC addresses from accessing the internet but allow them to use the network.
I can do this in other router interfaces but the BT Home Hub 2.0 has a VERY un user friendly interface and will not allow advanced internet access or other settings to be modifyed to suit my needs.
I am at an intermediate level at understanding network equipment and an expert at residential networking.

Not sure about the home hub 2, but on the home hub 1 you can use a "user defined" firewall setting to block access to a computer by specifying its IP address.
Source LAN
Interface 192.168.1.xxx (address you wish to block)
Destination WAN
Service ANY
Action Deny
You can tell the home hub to always use this IP address for the device you are trying to block.
There is probably a similar setting on the home hub 2.
By default I block all Internet access for devices, then I have rules to allow HTTP, HTTPS, POP3 and a couple of others.
I also have UpnP disabled.
This prevents any computer on the network accessing any non-standard ports.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

When I click to open Mozilla icon on my desktop, the page does not open & I cannot access it unless I type it in an Internet Explorer page?

When I click to open Mozilla icon on my desktop, the page does not open & I cannot access it unless I type it in an Internet Explorer page? When clicking on the Icon sometimes it will flash to the right of my desktop screen but does not open for access.

Hi Dave, thanks for your answer.
I have tried a several times to repairing permissions, restarting the mac, relaunched Finder, but no difference.
I copied the download folder to the dock...there I can open the files, but not deleting them or copying them.
When I open finder, then I click on the folder Download, after a while of thinking, it throws me out and back to the desktop.
already tried to sign in with the guest user account, then I am able to open the download folder.(but not seeing my files)
When I am trying to change the download folder in Safari, it also throws me out and gives me a error report ,for sending to Apple.
I think it's a settings fault or i think my download folder is locked. Almost desperat, already called support center,
They couldn't help, for free, due the 90 days free online help i have reached. If I want to solve this problem, they could try it , but it cost me almost 50 euros.
hope there is someone, who's knowing this problem.
By the way, I think it also could be that I dragged some downloaded music to the desktop, and dragged some folder that has the settings. Now its changed???
Or I was downloading something, and deleted the files in the download folder while it was unpacking and reparing the files.
It's not easy for a beginner Mac user (3 months) to already solve this problems.
Can you follow me? And seems this problem familiar to you?
Thanks in advance

SoundBlaster X-Fi drivers corrupt or not working "properly" without Internet access. Please fix!

The latest drivers located here are corrupt. It is a single exe file that does a CRC check before install begins. During this self check, it fails and stops extracting the files. As such I can not install the drivers. Now, I can probably even tell you why this happens. First I will start by saying that the install only fails on a system with no Internet access. Why so? Because if it has internet access, it updates/checks the digital certificate online. This is not good or acceptable for me as I install the drivers on offline systems and also even on my main Windows 7 setup, I multi-boot and have Windows XP on it too. When I initially install everything the first time, I do not start by first allowing internet access. No sir. That comes last. The first two things after the motherboard chipset drivers are the audio and GPU drivers. Then, a few other important things and then my security suite and then, finally, internet access. That's just normal.
Since this only happens to the driver file that supports Windows 8 (and all previous versions of Windows) and not the Windows 7 (and all previous versions of Windows) file, it's an issue that should be fixable. You may think it's not worth fixing, but I assume that this will truly be the last driver for the X-Fi card, and as such, can we please end it's life cycle with a driver that works on any O/S that it still supports?
Notes:
This issue only happens with the Windows 8 (latest) drivers. This does not happen with the previous (or any before) drivers. So this tells me it's an issue that could be resolved. Please check the digital signature settings on the Windows 8 drivers. Again, all other drivers work just fine on Windows XP with no internet. This issue only exists for the Windows 8 driver executable.
The driver file is not altered or corrupt. The digital signature only fails if it can not access the Internet, or perhaps a newer Windows that has updated root certificates. (ie: Win7)
Pictorial situation:

Don't you care Creative? Don't you care? /use Peter Griffin voice when reading.

Are the Adobe CS6 training video's available on DVD? My employees are not allowed internet access due too their environment.

We have recently purchased Adobe CS6, and are in need of the training video's if they are available on DVD. We are a correctional institution, and the inmates that do the work are not allowed internet access.

Hi Martinsils
I think most of the current content from Adobe and partners is online and for the latest versions, CC and CC 2014.
This might be a good place to start:
Amazon.com: training DVD adobe CS6 - Training / Design & Illustration: Software
or
http://www.amazon.com/Discounted-Adobe-Training-Bundle-Hours/dp/B00AFE3FP8
I'm not familiar with providers there other than PhotoshopCAFE. I personally was very happy with their training content.
Hope that helps,
- Dave

Hey, for some reason i turned on my macbook pro 2012 and it says i have no internet access. I then found out that it also says that my self assigned ip address will not connect to the internet. How is this and how can i fix it?

hey, for some reason i turned on my macbook pro 2012 and it says i have no internet access. I then found out that it also says that my self assigned ip address will not connect to the internet. How is this and how can i fix it?

Reset your modem.

I received a text today while at work about iCloud keychain verification code. I have not signed up for it or anything that uses it. I work out of the city with limited internet access so not sure why I would be getting this. Is my info safe??

I received a text today while at work about iCloud keychain verification code. I have not signed up for it or anything that uses it. I work out of the city with limited internet access so not sure why I would be getting this. I only got this number about a month ago. Apparently someone else had the number before because I get texts from his family members wondering whats going on. I got one yesterday and the person didn't seem to thrilled that the number was cutoff and today I got 2 texts about iCloud Keychain which I don't even know what it is. Seems suspicious to me. If the person who use to own the number is doing it he should know it is not his number anymore because he obviously didn't pay his bills. I'm not too sure about iCloud Keychain so just want to know my info safe?? It says it can store credit card numbers which is what gets me worried. Frankly I think it's pretty stupid to save that kind if information with any kind of app. But I don't want some random person trying to access my personal information because they are bitter they lost their number. Please let me know as soon as possible so I can change passwords or anything that is needed.
thanks

If it were me, I would go to my carrier and get a new number. Since you have only had it for a month, the inconvenience would be minimal.
Barry

TC8305C not online/no Internet access

Similar Messages

Maybe you are looking for