TCode for Materials
Grettings Gurus
Is there a transaction code which would display all the materials created for today?
Much thanks
HI,
Go to MM50 - Extend material view and here you select the view which is not maintained say costing view and then give the date and execute. you will get the materials created day wise.
You can also copy this list or save it as a local file on youe system.
This is Easy access tcode and through tables it is SE16 and MARA table
Thanks & Regards,
Kiran
Edited by: Kiran. V on Jul 1, 2008 5:02 AM
Similar Messages
-
Tcode for payment for materials
hi,
I am making a report in which i have to display the whether the material used to make a finished product payment is made or not?
can u plzz tell me which tcode is dere for it for a single material?
Edited by: ric .s on Apr 22, 2008 1:21 PM
Edited by: Alvaro Tejada Galindo on Apr 22, 2008 5:33 PMHi,
Inquiry / Document type IN
Tcode for creation VA11,VA12,VA13. tables VBAK,VBAP
Quotation / QT
Tcode for creation VA21,VA22,VA23. tables VBAK,VBAP
Purchase Order PO
Tcode for creation ME21,ME22,ME23. tables EKKO,EKPO.
Sales Order OR
Tcode for creation VA01,VA02,VA03. tables VBAK,VBAP
Delivery LF
Tcode for creation VL01,VL02,VL03. tables LIKP,LIPS
Billing MN
Tcode for creation VF01,VF02,VF03. tables VBRK,VBRP
To create a sales order we need purchase order number and custmer number. Before that, to create a purchase order we need to have material no, vendor no.
To create vendor tcode is
xk01(create), xk02(change) , xk03(display)
Tables are lfa1.
To create custmer tcode is xd01, xd02, xd03.
Table is kna1. -
What is the Tcodes for Uploading of data using BDC & CATT
PP members:
I was going through the <b>cutover activities</b> , and what I understood is we transfer all the legacy system data into SAP before going live
The data upload follows certain steps (depends on the organizational design load strategies)
First we upload all the master data ( material master, BOM, W/C's & Routings)
Then the transaction data ( Ideally speaking, there should no open orders i.e. WIP as on the day of cutoff )
If the WIP (Work in Process) is unavoidable then the materials consumed shall be treated as <b>materials of the previous stage</b> and necessary adjustments shall be made after cutover day
At this point, I could not able to understand what does the author mean <b>materials of the previous stage</b>
Now comming to the uploading of data into SAP from legacy system, we use tools like LSMW, CATT & BDC
Is it a must to use <b>only LSMW tool</b> to upload master data or any other upload tools are fine
Lastly,. I am not sure about the Tcode of CATT & BDC
Summary of the questions:
1.What does the author mean <b>material of previous stage</b>, for WIP materials during cutover activities
2. Is it mandatory to use only LSMW tool for uploading for master data
3. What are the Tcodes for upload tools CATT & BDC ?
Thanks for your time
Suren RDear,
1.What does the author mean material of previous stage, for WIP materials during cutover activities - as i understood, what is the stage of material..like it must have gone through 2 work centers and other 2 is left. i.e. you need to create Production order with only 2 operation as other 2 is already over. - usually it is done in such a way that we will create Production order and confirm till 2 operations and WIp is calculated so thatb FI will tally the books in SAP and lagacy.
2. Is it mandatory to use only LSMW tool for uploading for master data - no you can use any tool as required and suits yr requirement
3. What are the Tcodes for upload tools CATT & BDC- BDC through a prog in SE38. CATT through - SCEM. -
Idoc for materials and service for same contract.
Dear All
I have an scope where i have to migrate the data for material and services for the same contract.Is there an Idoc which does it so or otherwise ?Earlier in scope materials contracts have been loaded with the help of idoc type :- PURCONTRACT_CREATE01 and that of Service Contract using Idoc type :- BLAORD03.No customization is however permitted .Tcode for the same is ME32K.
Regards
SomnathHi,
It is not clear to me if you are working with sapscript or smartforms.
You have only to find a variable which identifies the kind of invoice
I do not know that variable so i use an example variable
for sapscript:
/: IF &VBDKR-FKTYP& = '1'
/ INVOICE
/: ELSE
/ SERVICE ORDER
/: ENDIF.
In a smartform you can also do something like that.
but There you work with conditions (eq, BOOLEAN)
You have only to find the right variable
success,
Gr., Frank -
Terms and conditions for materials
How do the Terms & Conditions appear in SAP.MM when a materials order gets cut?
Can SAP handle multiple legal Terms & Conditions?
One set of Terms & Conditions for materials orders and another set for service orders??We had implemented a similar requirement at a client.
The solution is as follows:
Have separate document types for Materials and Service POs.
Create separate standard texts (tcode SO10) for the legal terms and conditions for materials and service POs. Use them while printing.
In our case, we had separate legal terms and conditions based on material or services, the company code, etc. We had standard texts for all these and controlled it in SAP script (Version 4.6C).
Hope this helps,
Lakshman -
Give me some PP important tables and Tcodes for abapers
give me some PP important tables and Tcodes for abapers
thank you,
Regards,
Jagrut Bharatkumar Shukla10 Production Planning (PP)
10.1 Work center
CRHH Work center hierarchy
CRHS Hierarchy structure
CRHD Work center header
CRTX Text for the Work Center or Production Resource/Tool
CRCO Assignment of Work Center to Cost Center
KAKO Capacity Header Segment
CRCA Work Center Capacity Allocation
TC24 Person responsible for the workcenter
CRCO Allocation of costcentre to workcentre
S022 Order Operation Data for Work Center
10.2 Routings/operations
MAPL Allocation of task lists to materials
PLAS Task list - selection of operations/activities
PLFH Task list - production resources/tools
PLFL Task list - sequences
PLKO Task list - header
PLKZ Task list: main header
PLPH Phases / suboperations
PLPO Task list operation / activity
PLPR Log collector for tasklists
PLMZ Allocation of BOM - items to operations
10.3 Bill of material
STKO BOM - header
STPO BOM - item
STAS BOMs - Item Selection
STPN BOMs - follow-up control
STPU BOM - sub-item
STZU Permanent BOM data
PLMZ Allocation of BOM - items to operations
MAST Material to BOM link
KDST Sales order to BOM link
10.4 Production orders
AUFK Production order headers
AFIH Maintenance order header
AUFM Goods movement for prod. order
AFKO Order header data PP orders
AFPO Order item
RESB Order componenten
AFVC Order operations
AFVV Quantities/dates/values in the operation
AFVU User fields of the operation
AFFL Work order sequence
AFFH PRT assignment data for the work order(routing)
JSTO Status profile
JEST Object status
AFRU Order completion confirmations
PRTs voor production orders
AFFH PRT assignment data for the work order
CRVD_A Link of PRT to Document
DRAW Document Info Record
TDWA Document Types
TDWD Data Carrier/Network Nodes
TDWE Data Carrier Type
10.5 Planned orders
PLAF Planned orders
10.6 KANBAN
PKPS Kanban identification, control cycle
PKHD Kanban control cycle (header data)
PKER Error log for Kanban containers
10.7 Reservations
RESB Material reservations
RKPF header
10.8 Capacity planning
KBKO Header record for capacity requirements
KBED Capacity requirements records
KBEZ Add. data for table KBED (for indiv. capacities/splits)
10.9 Planned independent requirements
PBIM Independent requirements for material
PBED Independent requirement data
PBHI Independent requirement history
PBIV Independent requirement index
PBIC Independent requirement index for customer req. -
Delta Down Load for Materials- R/3 to CRM
Hi CRM Gurus
I have set up MW to do intial load for material masters and have been able to download products after maintaining all pre-reqs (config etc)...
Now I want to turn on delta download from R/3 to CRM for materials...I have tried CRM request R3AR2, R3AR4 to set up the request and also execute the request...
In the montitor tcode, it says its complete but if I execute the SMW01, I do not see any incomming Bdocs for R/3 materials...I have checked SMQ1 and SMQ2 and do not see any entries there either..
On the same note, if I re-run the intial load, my new material numbers appear in CRM..
Please adivse on what might be wrong with delta replication...
Regards
JaiHi Jai,
First thing is that you do not need to do any extra settings for the delta load, the momenet you initiate the initial load R/3 maintains the event in table TBE31 for that perticular object and delta automatecally gets activated. So to get the new material in CRM you need not run the request load rather it should come automatically. If not the you should have some stuck queue in CRM inbound with the queue name R3AD*. Also you should get the corresponding BDocs in SMW01.
If this is not the case then explain exactly what is happening in your system. Do you have any filter for the object MATERIAL?
<b>Reward points if it helps!!</b>
Best regards,
Vikash. -
How we enter text for materials in purchase order smartform
hi guru
how we enter text for materials in purchase order smartform
my requirement is create smartform for purchase order.
in this i have to create item-text, by using which tcode we can give item data
plz give more expalnation for this plzzzzzzzzzHi,
You can use read_text function module for readind text of material and store this value in internal table later pass this internal table to smartform will solve your problem.
otherwise there is direct option for text element property that is include text u can use that also
Regards
Gagan -
Mass change of Reorder point on MRP areas for materials
Hi,
Is there any process to upload mass change of reorder point on MRP areas for materials.
Please suggest.
Thanks in advance.Hi Pavithra,
I know this is an old thread and my answer may not be relevant to you anymore but maybe it will help others. Are you trying to do a mass change for the reorder points of the MRP Areas? If so, go to tcode SA38, then run program RMMDDIBE. Then go to create/change with Data tab. Select change MRP area and there you can change the reorder points for your MRP areas.
Regards,
Chester -
Tcode for Open POs and Requisition Material type
hi,
Can anyone assist me with the Tcode for displaying Open POs and Open Requisition showing Material type field in the report or an alternative way to get it. Thanks.Hi,
For Open POs
Got to ME2N
select scope of list as "BEST" and selection parameters as "We101"
For Open PR change scope of list to "BANF"
Get the materials for Open POs and pass them in table "MARA"
select fields Material Type "MTART" and Material Group "MATKL"
Execute to get the desired report
Regards,
Uzair
Edited by: Mohd Uzair Hussain on Jan 13, 2010 8:33 PM -
Hello gurus,
Are there any other Tcodes for routing creation other than CA01?
Thanks in advanceHi ,
Tcode Transaktionstext
CA00 Routing Menu
CA01 Create Routing
CA02 Change Routing
CA03 Display Routing
CA21 Create Rate Routing
CA22 Change Rate Routing
CA23 Display Rate Routing
CA31 Create Reference Rate Routing
CA32 Change Reference Rate Routing
CA33 Display Reference Rate Routing
CA60 Changes in Routings/Ref. Op. Sets
CA61 Change Documents for Routing
CA63 Change documents for rate routings
CA90 Use of Ref. Op. Set in Routings
CACP Transfer C tables to routing
CANM Number range maintenance: ROUTING_M
CANR Number range maintenance: ROUTING_R
CNN1 Number range maint.: ROUTING_0
CO81 Number assignment: routing to order
CSCPP Maint. routing param with materials
LDE1 Work Instruction for Routing
OKZ4 Routing Control Key
OP01 Customizing Routing/Work Center
OP49 Matchcode for Routings/Ref. Op. Sets
OP4B Overview variant: Routing
OP4D Overview variant: Rate routing
OP4E Overview variant: Ref. rate routing
OP4F Overview var.:Scheduling of routings
OP61 Number range maintenance: ROUTING_3
OP62 Number ranges for routings
OP87 Maintain Routing/Ref.Op.Set Usage
OPGE Ref. Oper. Set - Rate Routings (PP)
OPGG Work Center - Rate Routings (PP)
OPJ7 Maintain Routing Usage
OQ49 Routing matchcode
QSR6 Delete routings
RTGDI Direct input for routings
SBCA Routing Server Administration
SBRAC Catalog of Routing Attributes
SBRRE Routing Server Reorganization
SBRT2 Routing Test
VTR2 XSI: Master Data: Routing Info
Regards,
Shyamal -
Standard Report for Materials Cost Component Structure - PO Condition Type
Dear experts,
We are using below cost component structure (CCS) for materials:
- Direct materials
- import duty
- import handling
In which, all those above CCS are achieved through below condition type in Purchasing Info Record. When doing the standard cost estimate through costing run, we have successfully grouped all those condition types into their respective CCS. The problem is, while executing the standard report of "result of costing run" (S_ALR_87099930), the sytem groups all those three CCS into CCS "Direct materials" only.
I have tried different standard layouts, but still got no way to show all those CCS separately in the standard report.
Please kindly suggest what approach should i take
Thank you very much
BR, Erwin
@edit
Solved.
Edited by: Erwin Hartono on Nov 16, 2011 9:16 AMHi
Check cost elements assigned to structure. For this go to transaction code OKTZ and select your CCS and double click on Assignment Cost Component-Cost element interval.
Srinivas -
How to create a z-tcode for a report in FSI3 transaction
hi friends,
i want to create a z tcode for a report in FSI3 transaction, i have copied the program of the report and created a tcode in se93, but some more tabs are getting displayed in selection screen when im executing my Z Tcode, and report is not getting executed. kindly help.
regards,
nagarajan.jHi,
follow these steps:
1. enter into transaction SE43 and change any Z area menu (we won't save it anyway)
2. choose to add a new entry
3. in the popup, choose to add a new report
4. select "Drilldown"
5. the application class depends on the area from you are trying to define/launch drilldown reports. In case of transaction FSI3, the appropriate application class is "FBR FI:FIS - Balance sheet, balance sheet key figures
6. then choose the suitable report type. This corresponds to the nodes that you'll see in transaction FSI3
7. finally choose a report, and optionally a variant.
8. you'll return to the screen "Transaction code for reports" (same as in step 4)
9. expand the button to display further options
10. optionally, specify a custom transaction code and/or description
11. accept all popups. This will create the transaction
12. finally, exit and don't save the area menu
I hope this helps. Kind regards,
Alvaro -
Design the New process set up for Materials in one physical stock plant
Hi Experts,
The requirement is one physical plant as two different logical plants in the system. The main issue is how to administrate or how to find the set up which allows one Physical warehouse in Hamburg which we have supplying two Logical warehouses in the system without having thru really physically separate the warehouses into two different ones. Materials physically will be only for one warehouse.
Requirement is for Design the New process set up for Materials in one physical stock serving plant into two different system plants.
Most of the things are pointing in the direction that order Backlogs will not be converted into new organization. We have backlogs for the material requirements for purchase orders, sales orders whatever we have in the current setup; then there will have all are new orders from the certain dates taking in the new organization set up. These backlogs are very long at least three to four years.
We would like to find some way to have the all the material requirements ending up in one basket instead of two baskets. That still be able to deliver at least in system point of view from two different baskets.
We need to do analysis on one physical stock serving plant into two different system plants that could be done either by material master data or as i understood that could be from PS side.
can any one please tell me how we can maintian this setup in the system.
Please provide your valuable inputs.
Brgds,
RKRK,
Sorry, the creation of such an end-to-end solution is outside the scope of an online forum. Most consulting companies would send a multi-disciplinary team to perform this task, and would take several weeks to research your requirements, and come up with a prototype.
Sales order availability checking is described in SAP online help
http://help.sap.com/saphelp_erp60_sp/helpdata/en/93/744b51546011d1a7020000e829fd11/frameset.htm
I will say this. If your goal is to have two plants, with two company codes, and you wish to only procure or produce in one of the plants, then generally I would recommend using Special Procurement via Stock Transport Order (in standard SAP, Special Procurement 40). This based on a very small knowledge of your requirements. I have already cited the Sap online help for special procurement.
SAP online help for Warehouse management is at
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f8386f4afa11d182b90000e829fbfe/frameset.htm
As you begin to read the required topics, I am certain you will realize that this task is beyond the capability of an untrained person. I again suggest that you search for professional consulting services to assist you in this project. It will be money well spent.
I am now closing my responses to this thread. Good luck in your project!
Best Regards,
DB49 -
What is tcode for schema(list schema in BW3.5) in BI 7.0
Hi all,
If any of you know tcode for schema in BI7.0, pls let me know
Thank youHi Jr,
Thanks for the reply. I have old cubes (3.5) migrated into BI 7.0 environment and I have new cubes which are created under new (7.0 ) environment. When I am trying to do LISTSCHEMA I can able to pull up only old version cubes(3.5) migrated into new environment only. I am not at all seeing any other cubes.
I hope this helps.
Thank you
Jason
Maybe you are looking for
-
"Missing port information" and NoClassDefFoundError
I'm developing a Web Service using JWSPD1.2, and I'm having some problem in executing a client which accesses to the service I'm publishing. On Client side the error is: java.rmi.ServerException: Missing port information at com.sun.xml.rpc.StreamingS
-
Hi to everybody I installed oracle Client 10g-home2 in my laptop having the Windows 7 Home premium OS.. But I cant able to connect with SQLPLUS. After entering the Username,password,hoststring it is exiting.. It doesn't show any errors.. Can anyone t
-
JAXB cannot unmarshall and previous posts do not seem to be related
Hello, Recently, we had to change some of our XSDs, so I went and downloaded the latest Java web services pack (v1.6) and made the changes to the schema (only one new element). First, I realized we were using a 0.75 EA1 release of JAXB and that I wou
-
I have a strange issue where the Mac App Store always shows an update available for an Angry Birds app I have never downloaded on my Mac. Everytime I click on it for update, it gives a strange Username for which the update is available. This is
-
CUP - Initiator for roles not requiring approval (i.e. auto provisioned)
We recently upgraded to GRC 5.3, SP10 and started noticing that using CUP, for roles that should be automatically provisioned (i.e. no approval required), it is taking between 3 minutes 45 seconds to 5 minutes for the request to be successfully submi