Tcode P2W2 Does not exist in ECC 6.0 but was there in version 4.6c.

Hello Friends,
The Tcode P2W2 does not exist in sap version ECC 6.0 but was there in 4.6C.
So how can i know if there is a new transaction for this provided by SAP or they have removed it as this is a standard tcode.
In 4.6c the tcode p2w2 was calling the standard transaction sm29 with some default values. sm29 is persent in the new version.
also if possible please tell what can be the reason we have the tcode p2w2 with some value in tcode sm29 in 4.6c.
Regards,
Vidya.

Thanks for your help.
Infact i checked it earlier also in the TSTC table the tcode p2w2 is not existing in new version while it is persent in the older version. I could make zp2w2 and i also gave the default value for sm29 and its working, but the problem is as it was a sap standard transaction so all the end user needs to be informed about the change in tcode to zp2w2 from p2w2 . This will be difficult so i want to make sure there is no other standard transaction before asking the user to use zp2w2.
Regards,

Similar Messages

Function module does not exist in ECC 6.0

Hi All,
These two below function module does not exist in ECC 6.0 but exist in 4.6.Could you please let me know replacement of these two's.
FI_DOCUMENT_ARCH_READ_SINGLE
CHECK_IBAN_ACTIVE
Thanks
Mohit

Hi,
Thanks for your reply.Could you please give me example that how to use it.
Thanks
Mohit

Problem - STD Task does not exist in ECC 6.0

Hi All,
While looking for SAP standard Workflows in ECC 6.0, I am able to go to
Workflow --> Activiy --> Task, but after that I am not able to go inside the task and see the properties/ specifications of the task, its not giving any error msg, but its not navigating to the task screen.
I have tried other way also, i have copied the task number and pasted it in task with task type as "standard task" in PFTC, n tried to display it , but it is throws the message as "task does not exist".
Same thing happens if I copy any workflow number , paste it in task with task type as "Workflow Template" n try to display in PFTC.
Because of this problem I am not able to use any standard task in my zworkflow.
It will be great if someone can tell the possible cause and solution of this problem.
Thanks
Priya

Hey Priya,
Its standard Leave workflow's Standard Task, Then as Mark and others said, please check the authorization stuff. Also please remember not to give TS when you select the Standard Task.
Regards
<i><b>Raja Sekhar</b></i>

Table M_VMVLB does not exist in ECC 5.0

Hi,
We found that table M_VMVLB is available in 4.6C system but not available in ECC 5.0.
Do yo have ay idea about this? Is there any other table created for this ?
Regards,
Umesh

Hi Umesh,
as such kind of match code tables like M_VMVLB are not longer supported by the ABAP basis, all these match code tables where replaced by normal data base tables, e.g. the content of M_VMVLB can be found in table SHP_IDX_PICK now.
General information about the changes in match codes of delivery processing can be found at the release info for 4.70 - component LE-SHP-DL.
Regards; Ulrich

Category for service category S046 does not exist

Dear Experts,
This is regarding the Bdoc error "Category for service category S046 does not exist". ECC service materials are trying to replicate from ECC to CRM. In our scenario we doesn't required ECC service material in CRM. I have not downloaded service materials relevant data. Still i am facing the above error.
Please help to fix the above error.
Regards
Ashwini

Hi,
Thanks for your reply. I have maintained the filter on service_master object is not working.
I have not downloaded the service material from ECC to CRM.Then what could be the reason for the above bdoc error.
Please help me.
Regards
Ashwini

[SOLVED] ABS - nasm - install file (nasm.install) does not exist

I was attempting to build the nasm package and I encountered the following error:
==> ERROR: install file (nasm.install) does not exist.
When reviewing the PKGBUILD file there was a line in the header:
install=nasm.install
ArchWiki (PKGBUILD) explains the install directive
The name of the .install script to be included in the package. pacman has the ability to store and execute a package-specific script when it installs, removes or upgrades a package. The script contains the following functions which run at different times
I removed the install= line and everything appeared to work. My question is... does anyone know if the install script it was expecting to find did anything special that is going to cause me grief going forward?
Thx
Last edited by dwardca (2013-07-06 04:43:41)

I figured out what I did wrong. I copied only the PKGBUILD file out of /var/abs/extra/nasm folder .. the nasm.install was still in the folder.
Explains why I couldn't find the answer on Google.
Last edited by dwardca (2013-07-06 04:44:13)

Compiler exception - package does not exist?

I am new to NWDS and J2EE. I followed the steps in the tutorial as indicated in the below link:
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/library/netweaver-application-server/_netweaver-application-server/a-c/Creating%20your%20First%20J2EE%20Application.pdf
I did everything inside up to the last moment after I deployed my EAR and tried to run from the portal but got Application error. I checked the defaultTrace log file from the portal server and notice these errors:
#1.5 #001A6431E0FE0020000000750000155C0004B9B284863A19#1330076285575#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/CalculatorEar#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#Guest#0##40C36AF65ECB11E18721000000978DDA#40c36af65ecb11e18721000000978dda-0#40c36af65ecb11e18721000000978dda#SAPEngine_Application_Thread[impl:3]_21##0#0#Error#1#/System/Server/WebRequests#Plain###application [Calculator] Processing HTTP request to servlet [jsp] finished with error.
The error is: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: [G:/usr/sap/EPD/JC00/j2ee/cluster/server0/apps/sap.com/CalculatorEar/servlet_jsp/Calculator/work/jsp_Calculator1330076284538.java:41: package com.sap.examples.calculator.beans does not exist
          com.sap.examples.calculator.beans.CalcProxy calc = null;
                                                 ^
G:/usr/sap/EPD/JC00/j2ee/cluster/server0/apps/sap.com/CalculatorEar/servlet_jsp/Calculator/work/jsp_Calculator1330076284538.java:42: package com.sap.examples.calculator.beans does not exist
               calc = (com.sap.examples.calculator.beans.CalcProxy)pageContext.getAttribute("calc", PageContext.SESSION_SCOPE);
                                                                 ^
G:/usr/sap/EPD/JC00/j2ee/cluster/server0/apps/sap.com/CalculatorEar/servlet_jsp/Calculator/work/jsp_Calculator1330076284538.java:48: package com.sap.examples.calculator.beans does not exist
                    calc = (com.sap.examples.calculator.beans.CalcProxy) Beans.instantiate(getClass().getClassLoader(), "com.sap.examples.calculator.beans.CalcProxy");
                                                                         ^
3 errors
The thing I don't understand is the "comp.sap.examples.calculator.beans" class has already been included inside the EAR (I used my zip tool to check the EAR file and confirmed it's there), why did the compiler still complain that the package does not exist? Any great guys & gals out there can help this poor newbie who spent the past 5 hours searching for Google for answers but couldn't find any??
Thank you.
Brian

Perhaps I should give out more information about this problem.
The EAR file contains a WAR file and a JAR file.
The WAR file contains a JSP and it contains codes to refer to a java proxy class of package comp.sap.examples.calculator.beans.CalcProxy.
So it seems the compilation error is triggered when it tries to compile the WAR file.
I checked the structure of the WAR file using a zip tool.
At the base it contains this:
WEB-INF (a folder)
Calculator.jsp (the JSP file)
Inside the WEB-INF folder is these:
classes (a folder)
web-j2ee-engine.xml
web.xml
Inside the classes folder is a tree of subfolders to describe the structure of the CalcProxy class:
classes -> comp -> sap -> examples -> calculator -> beans -> CalcProxy.class
So the java class file and the JSP file is in the same bundle of the WAR file.
Why the compiler is not able to find the class file inside the JSP?

Rsh - connecting using user name that does not exist on remote computer

hi
is it possible to connect to a remote computer as, for example John, if user account John does not exist on the remote computer but is listed in .rhosts?
this is what i have written in .rhosts on the remote computer ( Work ):
home root
home John
when I connect as root:
rlogin -l root Work
everythings fine, but when I try to connect as John I get the incorrect login message
I know the message above probably answers my question, but I want to be sure

If the user id exists, you can bypass the authentication with .rhosts or /etc/hosts.equiv files; but you can't login to a remote machine as an anonymous user.

Error After creating 2 new wagetypes.0015 40 00E7 does not exist in T512Z

Hi Experts,
I have created 2 new wagetypes.They are properly transported to Quality server.
And the amount is calculting correctly in Qual server for infotype 0015.Basis guys has transported that request to production server.
Now i am unable to find the wagetypes which i have created.When i go to pa30 and select 0015 Infotype and subtype 00E7 ,it is saying that specified subtype is invalid.When i try to create it is giving message that 0015 40 00E7 does not exist in T512Z-Check your entry.Really there is no particular wagetypes in that table.But in Quality they were there.
What could be the problem.What can i do to appear those wagetypes in Production Sysytem.
Please advice me to resolve the issue.
Thanking You.
Sai.
Reg

Dear Vicky,
If you have this entry in Q system it should be request transfer issue. I have such a cases sometimes.
I recommend go to D system, delete the record from V_T512Z and save the table. System will ask you to create a new request. Create it and put your changes into. Go out of table and come back and create the same record into it save your changes.
Release your request and transfer it again to Q and P. Hope to see the record in P system.
Otherwise do the method Okan recommended thru SM30. It works also but sometimes recreating the records are the only solution as I know
Regards,
Omid

'Stream requested does not exist' error while importing MPEG-2 file.

Hi.
I received the following error when attempting to import an MPEG-2 file as a Timeline:
'Stream requested does not exist'
What does this mean?
Thanks,
William Johnston

Let me introduce you to the SEARCH link
http://www.adobeforums.com/cgi-bin/webx?126@@.1de98ec0
Go there and enter
Stream requested does not exist
As well as this message thread, there are over a dozen other messages you may read
If you don't find a solution... come back here and post more information
Always provide DETAILED computer and software information, including all hardware and software brand/model and version numbers, with DETAILS about the input files you are using and any output files you wish to create, plus read
How to ask a GOOD Forum question with COMPLETE information
First message gives 5 specific suggestions (you may do #5 for FREE, depending on your problem and purchase date) and then tells how to ask a question in such a manner that you provide all the information that you WILL be asked, for anyone to be able to provide an answer
Second message has advice, and links, concerning optimizing a computer for video editing
Third message concerns things that USED to work, but now do not (and more questions to answer)
Also, for Premiere Pro, check the
Wiki FAQ

The e-mail account does not exist at the organization

Hi, I have a user account that people receive the following message from:
The e-mail account does not exist at the organization this message was sent to. Check the e-mail address, or contact the recipient directly to find out the correct address.
<mailserverishere #5.1.1>"
I'ved looked and this particular case could be a quirky one.
The details are:
User account A is the account that Exchange thinks doesn't exist.
User account B is her boss.
A copy of user B's email is sent to A. (done through Delivery Options)
Senders sometime receive an email back saying user A's address doesn't exist.
(which really confuses them because they sent the email to B)
This is the only time the bounce message appears.
I've removed the forward and added it again. Still the problem.
Any clues?

You need to verify old delegates in UserB's mailbox by going to Tools -> Options -> Delegates. Remove old UserA and re-add it.
This is because of option “Delegates receives copy of meeting-related mails sent to me” is ticked with old UserA id in Delegates.
If you can't see any delegates then you have another option to delete delegates rule with MFCMapi.
- Open UserB's Mailbox with MFCMapi where UserB's outlook profile configured in online mode (not Cache mode)
- Double click the Mailbox of userB to open.
- Expand Root Container -> Top of the information store -> Inbox folder
- Right-click the "Inbox" folder, and then click "Display Rules Table".
- You can see all rules configured in mailbox.
- Delete the Delegate Rule with "PR_RULE_PROVIDER" column property shows "Schedule+EMS Interface". (this is the same option which you can set with GUI Delegation "Delegates receives copy of meeting-related mails sent to me" but stale copy is still in mailbox.)
THANK YOU! Amit Tank

Archieve does not exist for purchase order

Hello Gururs,
When i tried to change the delivery date for the PO and when i trying to save the PO
then it throws the error messages-'Archieve does not exist for purchase order'.
PO was created in feb.
Please help me how can i solve this issue.
BR
Ashish

Can you give a more detailed information.
What transaction you actually use, what you enter step by step until you get to the error: 'Archieve does not exist for purchase order'
This message sounds like you want change a PO which is already archived.
A change to an archived PO is not really logical, as you can only archive closed business cases. and if the business case is closed, then why would you change the delivery date.
A PO from February should not really be archived already in June. I never saw it in practice, as you could not do any anual reporting
I would assume further that SAP found the entered PO number in the archive index but did not find the way to the archive itself. This can happen if the archive file was deleted or moved manually.
I am not sure if the next messae has really anything to do with your purchase order, thats why I ask you to post the exact steps until the messages come up:
Le fichier archieve 000524-002SD_COND n'existe pas is the message discription
But even this message explains more or less the same, that the physical archive is no longer in the same place where it is expected to be found according to the info in records of table ADMI_FILES.

Equipment no does not exist

Hi,
When I am assigning serial numbers to the production order in CO02 at header level. System is throwing an error message sayiing that the Equipment number does not exist.
Please give me a solution to this issue.
Thanks and Regards,
Varun Siddharth

Dear DSK,
Thanks for your response. I have checked the process instructed by you. But the same error repeats again.
*Equipment 10725431 does not exist.*
*Message no. IS801*
Is there any other option?
Thanks and Regards,
Varun Siddharth

UD - Selected set code does not exist

Dear All,
We have create material in 0001 plant. It is consumable material and QA is not required. But by mistake Inspection flag was activited in material master.
Now material received is in QA Stock. We have created inspection plan and not inspection lot is in REL status.
During UD system shows following message :
"Selected set code does not exist, or data entered is incomplete"
Is there any way to take stock in unrestricted without doing any QA activity ?
Thanks and Regards,
Nirav

Hi,
Why don't you simply complete the Stock posting using 'Inspection lot stock' tab in QA32?
If you only need to take the stock out of QI and doesn't need Usage decision then why do bother about it.
Besides, this error comes when the UD selected set defined in Configuration is not maintained for the Plant.
To check this, Follow this path,
QCC0> Quality inspection> Maintain inspection type. Select the Relative inspection type and see what is maintained.
Once you maintain this Selected set for the plant 0001 using QS51, you won't get this error. Other way, define that selected set in the configuration which is already maintained for the plant.
ntn

Entry does not exists in check table -- Validation

Hi friends..,
I am able to create new entries in my table with INSERT statement through a function module.
But, the problem is..,
I am having one key field in my table, and T1(another table) is check table for this.
So while creating the entries through SE11, its giving error message like ENTRY DOES NOT EXISTS IN CHECK TABLE. But the same entry i am able map through my function module..!
Any extra settings reuired for this..?
Or.,
Am i need to write validation code?
Thanks,
Naveen.I

Hi...Rama chary..,
I am having separate function modules to do this..!
So here I can't to update two table at time.
My function module updating a table field with out checking it wrt its check table..!
Even i write code to check table , it will not meet the functionality of SE11 error..!??
so what can i do..?
Thanks,
Naveen.I

Tcode P2W2 Does not exist in ECC 6.0 but was there in version 4.6c.

Similar Messages

Maybe you are looking for