TCPIP additional addresses cant ping, can't see.
I'm trying to add an ip address to my netware server on a 172.16 network to make it visible on a 172.21 vlan for backup purposes. I have added an additional primary ipaddress on the interface and it seems happy but I can't ping the 172.21 address from a computer on either the 172.16 vlan or the 172.21 vlan. And I can't see the backup agent from a backup server running symantec backupexec 2010. I don't seem to be able to set a default route for this ip address on the 172.21 vlan. Is this even possible?
Originally Posted by AndersG
Donackle,
> And I can't see the backup agent from a backup
> server running symantec backupexec 2010. I don't seem to be able to set
> a default route for this ip address on the 172.21 vlan. Is this even
> possible?
Have you set up packet forwarding on your server? Ie changed to "Router"
from "End Node" inn INETCFG.
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms
It is. I can ping the 172.16 address, but not the 172.21..
Similar Messages
-
I have my printer email address, but I can not see my printer listed when I login to hpeprint.com
I will need some more information in order to assist. What model of printer do you have? Different printers have different features such as the ability to display the printer's ePrint address on the front panel of the printer. The website that the printer can be viewed at is eprintcenter.com. Click on this link here to see the sign in page. Have you signed up and register the printer at this site? Is the email address for the printer one that you have customized? Or is one consisting of what appears to be random letters and numbers?
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved? -
MBP can't see computers on network
*Network:*
1 PC Vista Ultimate
2 PC XP Pro
1 Netbook XP home
1 Mac Book Pro w/ Leopard 10.5.6 OS
Linksys Wireless router and using Airport. WPA security setup with passcode and all is well for logging into router and being assigned dynamic IP address.
This network has been in operation over 3 years with all the PCs and hardware in windows file sharing environment.
*Problem:*
Vista and XP can see the Mac in the network
MBP can't see other PC's in Network panel
SMB file sharing is on
Workgroup is set and Ok 'HOME NETWORK' on all PCs & MBP
I can Ping the Vista and XP pc's IP address
But I can't see the shared PC's, printers, or PC file shares on Mac Book
I am newby on Apple networks and the Mac OS is familar to me yet.
Anybody have a clue as to what I missed in setup.
Digiman3Well you network is unique because of the different software firewalls on the different flavors of Windows. So first read "Well known" TCP and UDP ports used by Apple software products, Sharing files between a Windows Vista Home Edition PC and a Mac running OS X Leopard 10.5 and the Apple discussion thread Explanation of Leopard NetBIOS (Windows Sharing) Wackyness With Solutions!. Then see if anything in these links help.
Now if this is a Windows domain (it has to be 2003 or better) then look at the article Connecting a Macintosh running Leopard (10.5) to SBS 2003. Plus for you printing problem read the older web pages (for 10.4.x but it ill may help) Printing to a printer on a Windows XP PC from a Mac running 10.4.x and How to Use a Printer Attached to a Windows XP Computer in Mac OS X and Adding a printer shared by a Windows computer via SMB/CIFS.
Lastly did you know about the web site MacWindows.com? Also a lot of people have been having problems with Linksys routers and OS X. IMHO other routers don't seem to have this problem. I sure hope one of these links help, Good Luck.
Message was edited by: satcomer -
How can I access alternate email address?, How can I access alternate email address?
I can't see why Tokyo should be a problem - rather the reverse given the Japanese commitment to technology. Can you get at http://icloud.com ? (Remember that you can't access that on an iOS device). Or you should be able to access it in your Mail app or application - what sort of problems are you having?
-
Can I change my iCloud email address? I do not see a way to edit it.
Can I change my iCloud email address? I do not see a way to edit it.
Jeffrey is correct: but you do have the option to add up to three 'email aliases' which are additional addresses (not accounts) which deliver into the same inbox as the main address. Indeed it's a good idea to give out an alias address rather than the master address, in case of spam or other problems: you easily delete an alias without impinging on the behaviour of the rest of the account.
There seem to be problems at the moment about creating aliases, so if you find you can't, give it a couple of days and try again.
http://help.apple.com/icloud/#mm6b1a490a
You should be aware that, once created, aliases can't be moved to another account, nor turned into full accounts, nor reactivated once deleted. -
Cant Ping UC320W from 881 but can ping 881 from UC320w
Hi,
Wondering if soembody could help me here. I have a uc320 and router directly connected and I can ping the router from the 320 but cant ping the other way. As a result I only have SIP traffic working outbound but cant get and calls inbound. Im missing something here but cant figure out what
Any ideas ?
Thanks a million
J-PHi,
Thanks for the response. The UC320 has the WAN Interface is statically assigned 192.160.160.2/30 and the gateway is
192.160.160.1 there is no CLI on the 320 so cant provide any config. I can ping the 881 from the 320 no problem but it wont work the other way. Evrything looks like it up and running from show commands etc.
The config of the 881 is below have changed the wan address's etc for obviuos reasons -
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname _Router
boot-start-marker
boot-end-marker
logging message-counter syslog
no aaa new-model
dot11 syslog
ip source-route
ip cef
ip name-server 83.147.160.2
ip name-server 83.147.160.130
no ipv6 cef
multilink bundle-name authenticated
archive
log config
hidekeys
class-map match-any VOIP
match protocol rtp audio
class-map match-any WEB_TRAFFIC
match protocol http
match protocol ftp
match protocol secure-http
match protocol secure-ftp
class-map match-any VIDEO
match protocol rtp video
policy-map QOS_POLICY
class VOIP
priority percent 15
set dscp ef
class WEB_TRAFFIC
bandwidth percent 30
random-detect
set dscp af32
class VIDEO
bandwidth percent 20
set dscp cs4
class class-default
bandwidth percent 30
random-detect
set dscp default
interface FastEthernet0
switchport trunk native vlan 100
switchport mode trunk
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
switchport mode trunk
interface FastEthernet4
bandwidth 5000
no ip address
speed 100
full-duplex
service-policy output QOS_POLICY
interface FastEthernet4.201
description Voice_VLAN
encapsulation dot1Q 201
ip address 172.18.24.x 255.255.255.252
ip nat outside
ip virtual-reassembly
interface FastEthernet4.202
description DATA_VLAN
encapsulation dot1Q 202
ip address 92.51.19.x 255.255.255.252
ip nat outside
ip virtual-reassembly
interface Vlan1
ip address 192.168.160.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface Vlan100
ip address 192.160.160.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 92.51.19.X
ip route 172.18.24.x 255.255.255.255 172.18.24.x
no ip http server
no ip http secure-server
ip nat sip-sbc
ip nat inside source static udp 192.160.160.2 5060 interface FastEthernet4.201 5060
ip nat inside source list 1 interface FastEthernet4.201 overload
ip nat inside source list 2 interface FastEthernet4.202 overload
access-list 1 permit 192.160.160.0 0.0.0.255
access-list 2 permit 192.168.1.0 0.0.0.255
banner login
Thanks again
J-P -
Can't see the ESS Additional Personal Data link within Personal Information
Hi All,
For some reasons, I can not see the Additional Personal Data link within the ESS Personal Information iView. I have checked the Homepage framework and the existence of the iView in the PCD and everything appears to be fine.
Do I need to assign any additional infotype to my id or give myself specific authorisations to see this link?
I would really appreciate if you could provide an answer to my query.
Thanks,
VibhuHi,
I think mostly you have maintained the data in PA30 Transaction and had data in Info type 0105.
After this try to check with your EA-HR patch and SAP HR patch in the services. If both are not maintained at the same patch levels such type of problems will occur.
Regards,
kishore. -
A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touch screen not working plus there are blurred lines across the screen and I can't see anything that it displays.
Now when I try too connect my iPhone 4 to iTunes on my computer at home an error message comes up saying that I have to unlock my iPhone 4 for it to communicate to my device.
But the problem is that I can't unlock my iPhone 4 because I'm unable to see the key pad and my touch screen no longer responds when I touch it.
I just want to reset my iPhone 4 back to its Factory Settings & start all over from the beginning.
How can I unlock my iPhone 4 with iTunes on my computer or any other option you suggest me trying.
Thank you in advance,
SiHeroIf you have had a "local guy "repair your iphone you will not get any support from Apple for warranty OR post warranty
If Verizon return it to Apple it wil not be handled by Apple
If Verizon also use unauthorised repairers you may be lucky
(Apple do not sell parts to local guys or anyone else ) -
I have two iMacs, an iPhone, and an iPad. All use the same email address but the new iMac would only let me set up the email account as an imap account. On this iMac I can only see three weeks worth of emails. On the other iMac, iPhone, and iPad, this email address is set up as a pop account and I can see emails as far back as three years. I use Yosemite on the new iMac and I cannot find out how to change the settings to let me see more than three weeks worth of emails. This is an att&t email account which is basically a Yahoo account.
Nope. It will reset all settings. For fix errors.
Or you can try Logging out and Restart your iPad and Sign in again. -
Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can;t see a symbol for address book.
Where are addresses kept on MAIL? I don;t like the new format at all. Frances
Begin forwarded message:
From: Frances Topping <[email protected]>
Subject: Re: - Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can't see a symbol for address book.
Date: August 25, 2014 at 9:46:01 AM EDT
To: discussions-replies <[email protected]>
Old Entourage is POP and new Mavericks MAIL is IMAP I believe. I don;t know how to export in the forms you mention. Frances -
How can I see my previous ping activity?
How can I see my previous ping activity?
No nothing gets purged. Its all there, but finding it is another thing.
I bookmark threads as I cannot find a darn thing on this forum. -
How can I see in my address book all contaacts that have not been placed into groups?
How can I see in my address book the contacts that have not been put into groups?
The best way to do that is create a new "smart group" with the following:
This way you can identify those without a group and drag them to one.
Regards,
Captfred -
10.5.8 iCal clients can't see additional Wiki Calendars
We just implemented a company wide iCal Server solution on 10.6.3 server (although just updated to 10.6.4 with no difference).
Most of our clients are 10.5.8 (iCal 3.0.8 - 1287). We've setup about 4 or 5 wikis, each with calendars and setup each user's iCal with additional CalDAV accounts for each Wiki Calendar, with URLs in the form of
http://server.example.com:8008/principals/_uids_/wiki-<wikiname>/
Now, within each Wiki/Group Calendar account, there might be multiple calendars. It seems that 10.5.8 clients can only see events in ONE of these calendars, whereas 10.6.x clients can see everything! User credentials seem irrelevant, it's just down to the OS/iCal version.
At first, I thought it might just be the primary calendar (/calendars/_uids_/wiki-<wikiname>/calendar) as opposed to the secondary ones (/calendars/_uids_/wiki-<wikiname>/87263455-a895-dfg3-23456789). However, even that is not the case. I can't seem to find any pattern to dictate why some show and some don't.
Now these 10.5.8 users can create events in the calendar whose events they can't see, but then others can't see those events. I've dug around in /Library/CalendarServer but I can't seem to find anything about event level ACLs. Am I misunderstanding how this should work? Is this a limitation of 10.5.8 iCal? Is anyone else experiencing this?I'll just add that when users view the calendars via the web, all events show up perfectly.
-
Hello, I have installed Reader, Adobe Acrobat, trial versions of Photoshop and Illustrator. Some more than once. They work for a few days at most then I am told to re-install. I cant look at any pdf file even though I can still see reader in my programs. What is going on and what can I do to fix this?
Unfortunately no, It says "Adobe not responding" as well when I try to open a pdf. It has done this a few times where I had to uninstall and reinstall. Also, Illustrator tells me to uninstall/reinstall as well.
-
Why in the address bar is not URL but "go to the web site"? How can I see the URL in the address bar?
those are some addons that other users have reported to cause the same problem in the past: Gom player, Ask Toolbar, DivX (Plus) Web Player, RealPlayer Browser Record Plugin...
in case you have one of them present, try to disable/remove it - otherwise you could disable all your extensions & reenable them one by one (a restart of the browser might be necessary after each step) until you find the culprit.
Maybe you are looking for
-
Very slow copying text from microsoft word
Any idea why copying text from word (office 2004) should be v slow? Copying same text in OS9 no problem (am currently copying text from client supplied documents into other applications ie. Quark, so having to go to another machine running previous O
-
Backup DB with dynamic sql - want to substitute in dbname and disk file path
Re: Backup DB with dynamic sql - want to substitute in dbname and disk file path Hope I can explain this. Below is a small snippet of code. I want to set @SQLTemplate_TSQL once at the top of the script and then execute the SET @SQLCommand and sp_exec
-
DHCP Vendor Class of Server2003
Hi all, 1. There are two clients with different Vendor ID (send via DHCP DISCOVER option 60), for example, client A's option 60 is AAA, B's is BBB. 2. I had created two Vendor Classes on a Windows Server2003. They match the Vendor ID of client A and
-
MapViewer ECWRenderer : supersampling not supported
In the Mapviewer user guide there is an example of how to build in a custom ECW renderer. There is an error in the example because parameter scaleImage is forgotten in function renderImages. It is unclear for me when this parameter is true or false.
-
Need Help on calling report in OAF Page
Hi, At present i am wokring EAM Module. Here i need to call one report. In my OAF Page one button is there("The name of the button is *Issue*"). After clicking this button i need to fire one report(The name of the report is "Maintenance Picking Slip