Technical content for the BI statistics

Hi Guru's
What is technical content for the BI statistics and where do I find this???
I want to know what is the procedure to know which query is mostly executed in the system and by how many users.
Thanks & Regards.

Hi,
What is technical content for the BI statistics and where do I find this???
you can enable this facility
go to RSA1> tools >bw statistics>here we have two options like OLAP,WHM ,if you chk OLAP for the respective cube,now it will display all the related infromation i.e all the details of the queries pertaining to the cube
WHM will store all related data staging related information
want to know what is the procedure to know which query is mostly executed in the system and by how many users
the below cubes will meet your requirement
0BWTC_C10_Q011 OLAP Use per User
0BWTC_C10_Q506 OLAP Use per User (Total Number of Records)
0BWTC_C10_Q505 OLAP Use per User (Total Time)
0BWTC_C10_Q503 OLAP Use per User (Time)
chk the below link
http://help.sap.com/saphelp_nw04/helpdata/en/88/3e1f3b5839e10fe10000000a114084/content.htm
Once you install technical content you can use the features of BW statistics etc..
Cheers,
Swapna.G

Similar Messages

Datasources Missing when Installing Technical Content for BI Admin Cockpit

Hi,
I have installed the Technical Content for BI Admin Cockpit in our QA systems, for BI7, using SPRO, and it seems that there are some missing datasources, transfer rules, etc.,
The one's that are missing are:
=> 0TCTPRCSVAR_TEXT
=> 0TCTPRCSVAR_ATTR
=> 0TCTBWOBJCT_TEXT
=> 0TCTBWOBJCT_ATTR
Does anyone know if this is a known issue, that these are not available?
Please let me know if they're required, and if there's a fix to get them back.
Thanks,
John

Hi John,
In my system the symptom is the same. So I just installed them myself in RSA1->BI Content.
I don't think it's a big problem because the queries on the MultiProviders can run without these master data. For example, you may find the text of query is missing but you can see query's technical name.
I remember when I activate 0TCTBWOBJCT_TEXT and 0TCTPRCSVAR_TEXT, these datasources are in BI 7 version but there's no transformation. So I create myself.
Please let us know if you have other questions.
Regards,
Frank

SLDCHECK error-Check and maintain the SLD content for the current client

Hi experts,
       I am trying to configure PI on QAS box and getting this error when I ran SLD check. This is the only warning/error I am getting in YELLOW and the other messages were in green so thinking that is ok.
=============
   Calling function LCR_GET_OWN_BUSINESS_SYSTEM
   Retrieving data from the SLD server...
No corresponding business system found for system NWQ      client 001
    => Check and maintain the SLD content for the current client
    Summary: Connection to SLD works technically, but the SLD content may need maintenance
   => Check and maintain the SLD data content
==========
I went through some threads and readiness check document but not able to get it resolved because I am a developer and not sure about exact steps. Please give me if you have any feedback and if there is admin jobs involved I will get BASIS help but it is totally my responsibilty to get the system up and running. Any help would be greatly appreciated.
Thanks.
Mithun

Hi Mithun,
    Let me know if there is any recent changes/Patching/Upgradatiions in your server....
Perform Cacherefresh both in ABAP and JAVA Stacks..
For ABAP level cache go to SXI_CACHE -> RUNTIME->START DELTACACHE REFRESH
>>>>SXI_CACHE -> RUNTIME->COMPLETE CACHE REFRESH
CPACACHE:
For complete cache refresh u2013 http://<hostname>:<port>/CPACache/refresh?mode=full
For delta cache refresh u2013 http://<hostname>:<port>/CPACache/refresh?mode=delta
Please let me know if this doesnot resolve your issue.
Cheers!!!!
Naveen

Technical Acknowledgement for the message ORDRSP

Hi
This is a vendor Management Inventory scenario (VMI).We have XI setup between SAP and 3rd party system.
We have a requirement where we are receiving ORDRSP IDOC (Inbound) message from 3rd party system via XI into SAP whenever stock falls below threshold level it creates PO in SAP MM .
Now we want to send technical acknowledgement for the same whenever successful idoc ORDRSP is posted . There are no contents of this acknowledgement message just it means IDOC is "Received".
How can we do this.
Regards
Ashish

My question is answered

Technical Specifiaction for the ABAP HR Functional Spec

HI Please help me to write a technical spec for the below functional spec.
As-Is Business Process
Duplicate Performance, Development and Career Plans are being created. Forms have been created with incorrect validity dates. Some people that should have forms dont and some that should not have forms do. We have no easy way to periodically audit for these situations.
To Be Business Process
Audit report to be run via the SRET report tree to check for duplicate plans, incorrect validity dates, and actives that are missing forms as well as terms that have forms that are not in completed status.   Should be able to save selections as a variant.
Selection Screen
Use selection screen from YAUMI tcode as a base model. We only need the top bar, the selection section,, and a section for invalid data edits, which will be modified as shown below. Additionally, there should be a section to choose templates.
Template section:
      This section can be modeled after the selection screen in program Y_HRHAP_PDPGEN. Each template is selected via drop down, and the plan end year is entered. Drop down to choose template that shows form name. For development and career, the expected end year is 9999, which would be entered in the year for those 2 templates. For the Performance plan, the current year is the end year, and would be entered.
Invalid Data Edits section:
   Checkboxes for:
1)     duplicate plans
2)     invalid validity dates
3)     missing plans for active
4)     terms with non completed plans
Logic
     Include the templates selected above for associates with the chosen selections.
     If duplicate plans checkbox is selected
            If the plan year end on the screen is 9999, see if there is any associate that has more than one of this template in status not equal to Complete. If so, output to audit report.
            If the plan year end on the screen is less than 9999 (i.e. 2007), then see if there is any pernr that has more than one of this template in a status that is not equal to Complete with an validity end date of 12/31/yyyy (where yyyy is the year on the selection screen). If so, output to audit report.
     If invalid validity dates is selected
        If the plan year end on the screen is 9999, see if there is any pernr that has that template in status not equal to Complete with an end date not equal to 12/31/9999. If so, output to audit report.
            If the plan year end on the screen is less than 9999 (i.e. 2007), then see if there is any pernr with that template in status not equal to Complete with an end date = 12/31/9999, or with an end date with a month and day not equal to 12/31. If so, output to audit report.
     If missing plans for active is selected
     See if there are any people in the selected population that do NOT have any of the selected templates in a status not equal to Complete If so, output to audit report.
      If terms with active plans is selected
     See if there are any people in the selected population that DO have any of the selected templates in a status not equal to Complete If so, output to audit report.
Output
      Appraisee Pernr
      Appraisee Name
      Template name
      Validity Dates begin date and end date
      Status / Substatus
      Appraiser Pernr
      Appraiser Name
      Message :
          Duplicate plan
          Invalid Validity End Date
          Missing plan
          Plan not completed.
      For missing plan error, the fields for validity dates, status/substatus, appraiser pernr and appraiser name will be blank.
Thanks
Raja

Hi IB!
Please check the following links for docu:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/80/ea89395eb58c4f9d0c3e837cf0909d/frameset.htm
Check this for ESS:
/people/srinivasarao.gv2/blog/2005/06/11/configuring-ess-in-sap-enterprise-portal-60
I hope it was in time!
Have a nice day!
Best regards,
Zsolt

HT201363 I forgot the security question and did not reach me any e-mail from an email technical support for the alternative I hope to help

I forgot the security question and did not reach me any e-mail from an email technical support for the alternative I hope to help

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                         Apple ID- All about Apple ID security questions.

Is there anywhere a technical manual for the NB100 ?

Is there anywhere a technical manual for the NB100 ?
I want to replace my internal harddisk with a bigger one and don´t want to destroy anything so a manual for the best way to open the NB100 would be a good thing :-)
cola

The upgrade is not that hard. There is no need to completely disassemble the unit. Remove the screws from the underside, then remove the cover at the top of the keyboard (the cover with the on/off switch on). Remove the screws from under the cover and then remove the keyboard, gently unclipping the ribbon. unclip the ribbon for the touchpad and the wireless aerials (x2). At this stage the HDD is accessible on the left side, remove the screws and gently pull the HDD out.
Once the new drive is fitted, reverse the procedure. I had no option but to replace mine, as I was on an overseas trip when the Toshiba HDD failed (the system was saying I had no HDD fitted) and as I had only taken the NB100 with me I had no choice if I wanted a working laptop for the trip, I stripped my external HDD and fitted it into the NB100, I now have a NB100 with a 250 GB HDD and it's perfect.

Creating content for the iBooks store

Where can I find out about creating content for the iBookstore? Is this store open to individuals like the app store is? Thank you for any help you can offer.

Sorry, no, I don't know how a company signs up with the iBookstore. I've not seen Apple say anything. I can only presume that either Apple approached the largest of the existing aggregators as they did the large book publishers, or those aggregators contacted Apple and were able to get to someone within Apple, but who that person might be I don't know.
Regards.

Installing/transferring in the content for TCT (BW statistics)

hello - i have a bw350 system where i'm trying to get all the bw statistics (TCT) stuff setup. I've found some How To guides and help files for this but still have an issue.
where i'm at now, i can see all the bw stat cubes in rsa1-> modeling. i can also see all the bw stats reports in RSRT if i drill in thru the infoarea button. so all that's great. BUT, if i goto rsa1--> infosources --> technical content --> bw statistics ... i don't see any of the Infopackages yet under the Infosources shown there.
thanks

thanks krzysztof and ravi - i actually figured out the problem w/ this help file http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
the item#2 stuff I had not done yet.
i do have 1 question still - i now can see infopackages in my bw statistics infosources (rsa1 -> modeling --> infosources --> bw statistics...) - at least for all of them but 0bwtc_c02. that one still doesn't have any - the rest have infopackages under them. any ideas?

Implement BI 7.0 Technical Content for BI admin Cockpit

Hi Experts
I should begin to activate, fill, and use the BI Technical Content system.
My goal is to set up and use the BI Administrative Cockpit.
I start by filling the necessary objects and running the queries.
I am new to this area.Could any one provide me step by step solution for How to activate BI Admin Cockpit technical Content in BI 7.0
How should I tranfer data and run queries.Please through light on these topics.If you have any useful materila pls forward to my mail id:[email protected] your time and help.
Thanks,
Vamsi .

Hi,
Did you see the doc below.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90080703-4331-2a10-cd98-9c1e95acdea0
Regards.

Help to find business / technical content for cost center accounting

Hi all,
I am a new to BW. Where can i find the technical and business content for cost center accounting info cube (data from R3) and the equipment info cube ZMXCART_XX(data from flat files). These are the two cubes which i learnt from training.
Does SAP BW provide techinal and business content for its demo cubes and how can i find them?
Please forgive if my question is too basic and crude.
Thanks
ak

hi AK,
you can find from help.sap.com or bi best practice
http://help.sap.com/saphelp_nw04s/helpdata/en/cb/149b3979e90e1be10000000a114084/frameset.htm
the steps ...
http://help.sap.com/saphelp_nw04s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
Financial ... Controlling ... Overhead Cost Controlling ... Cost Center Accouting ...
http://help.sap.com/saphelp_nw04s/helpdata/en/6e/d80c3c99d56448e10000000a114084/frameset.htm
see infocube
http://help.sap.com/saphelp_nw04s/helpdata/en/43/d90c3c99d56448e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/cb/149b3979e90e1be10000000a114084/content.htm
hope this helps.

Slow Moving Item Scenario - Technical content for Queries

Hello
Due to preparations for upgrade to BW 7.30 we would make an analysis of not or seldom used BEx reports (queries, workbooks, etc.)
All of unused objects should be deleted in advance of an upgrade.
I checked if there is a query which shows slow moving items for queries.
Is there any technical content (query) which reports this scenario for BEx objects?
Thanks for any advise.

follow steps in this doc:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11291595-0501-0010-c881-e02c27261b55

Can you create a table of contents for the documents within a PDF Portfolio?

If I create a pdf portfolio that contains multiple documents (e.g. Word, multiple PDFs and Excel documents), is there a way to create a table of contents at the beginning of the portfolio to help navigate to the individual documents?

Hi,
The Files list displays a list of files, so the user can quickly see all the files in the portfolio with any information you want to share; title, description, file type, size etc.
Or, you can also use a different layout, for example, the Linear and use the space next to each file to describe it.
Hope this helps.......
JGaf

How to clear the table contents for the new selection values?

Hi,
Im developing some very basic web dynpro applications.I have created one application to demonstrate use of SERVICE CALL.Now in one of the COntext Nodes,I have one attributes as TABLE.I have 2 input fields and when i enter any sel critteria in these 2 fields,the table is populated accordingly.Now when i change the value in the input fields,the new output gets appended in the output TABLE.How do I clear the contents of the OUTPUT table attribute in the method?
Can someone tell me the common methods used with context nodes like REFRESHING,CLEARING etc?How do I know which methods to call for what action of the nodes ...like for binding internal table to any context node we use the method BIND_TABLE...
Any inputs will be highly appreciated.
Thanks!
BR,
SRM tech.

Hi,
To clear the contents of the node, use invalidate method.
data: l_node type ref to if_wd_context_node.
l_node = wd_context->get_child_node( 'NODENAME' ).
l_node->invalidate( ). " all the data in the node will be cleared
To clear a single attribute you can use set_attribute_null.
Regards,
Radhika.

Portal content for the room.

Hello,
We created a new Room in portals for collaboration. I then added a user to this room, but not as an owner.
Both the owner and the user of the room can see the room from the role Collaboration -> Room Directory. But once we click the room there is no way to collaborate on the content. This is however not a problem with the previously rooms. This problem started when we migrated from NW2004 sp16 to sp17.
Has anybody experienced this issue before. Would you know how I can get the New>, or the New Folder> links so we can collaborate on the rooms.
Thank you for the help.
Best Wishes
Sumit.

Hey Irina,
This problem persists. We have since created new rooms and asked the users to collaborate again. We slowly try to move the old content from the directories back to the new rooms.
Hope that helps.
Sumit.

Technical content for the BI statistics

Similar Messages

Maybe you are looking for